NATIONAL FLUID POWER CENTRE UK www.nfpc.co.uk – Book on - line, Pay on - line, Register on - line COURSE PLANNER (ISSUE 35) COURSE PLANNER (ISSUE 35) August - December 2018 SHORT COURSE PLANNER NFPC - BFPA Certified CETOP Education Centre also NQA ISO 9001:2015 Registered The UKs Leading Centre for “INTEGRATED SYSTEMS ENGINEERING” HYDRAULICS, PNEUMATICS, APPLIED ELECTRONICS & CONTROL Plus - CETOP Competence Based Qualifications - NFPC Competence Based Training Programmes - Bespoke Training, d esigned to meet your needs - CPD Approved Courses by Institute of Quarrying THE NFPC is an APPROVED TRAINING provider for: Course information and on-line booking is available on our website You may also contact Anne Clarke Bookings & Customer Liaison E-Mail: [email protected]Tel: +44 (0)1909 504539 Fax: +44 (0)1909 504774 Based at Worksop Nottinghamshire S81 7HP (UK) We have possibly the BEST PRACTICAL FACILITIES in Europe plus Systems Training Engineers with a vast knowledge and experience in maintaining and managing Integrated Fluid Power System TRY OUR FOC ON-LINE Self Assessment Questionnaires to help YOU identify your current knowledge levels NFPC Courses meet and exceed all BFPA Minimum Education Recommendations
6
Embed
NATIONAL FLUID POWER CENTRE UK - Hydraulics and Pneumatics ... · –Book on-line, ... SHORT COURSE PLANNER ... HYDRAULICS, PNEUMATICS, APPLIED ELECTRONICS & CONTROL
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NATIONAL FLUID POWER CENTRE UK
www.nfpc.co.uk – Book on-line, Pay on-line, Register on-line
CO
UR
SE P
LAN
NER
(
ISSU
E 3
5) C
OU
RSE P
LAN
NER
(ISSUE 3
5)
August - December 2018
SHORT COURSE PLANNER
NFPC- BFPA Certified CETOP Education Centre also NQA ISO 9001:2015 Registered
The UKs Leading Centre for “INTEGRATED SYSTEMS ENGINEERING”HYDRAULICS, PNEUMATICS, APPLIED ELECTRONICS & CONTROL
Plus - CETOP Competence Based Qualifications- NFPC Competence Based Training Programmes- Bespoke Training, designed to meet your needs - CPD Approved Courses by Institute of Quarrying
THE NFPC is an APPROVED TRAINING provider for:
Course information and on-line booking is availableon our websiteYou may also contactAnne ClarkeBookings & Customer Liaison E-Mail: [email protected]: +44 (0)1909 504539Fax: +44 (0)1909 504774
Based atWorksopNottinghamshireS81 7HP (UK)
We have possibly the BEST PRACTICAL FACILITIESin Europe plus Systems TrainingEngineers with a vast knowledge and experience in maintaining and managingIntegrated Fluid Power System
TRY OUR FOC ON-LINE Self Assessment Questionnairesto help YOU identify your current knowledge levels
NFPC Courses meet and exceed all BFPA Minimum Education Recommendations
1. Possibly the BEST practical facilities in Europe to improve your skills2. We have 8 highly experienced Training Engineers from industry who
understand your training needs and are here to improve your performance.
3. YOU need never wait again to attend courses, we run many of our courses every week and on demand.
4. All courses have a high practical content to improve your skills through hands on experience.
5. Course contents have a high usefulness factor and relateto the real world of work and that of improving your overall ability back in your place of work.
7. We will respond quickly to your needs with a positive solution and help you in every way to upskill and educate your staff.
8. NFPC is the approved training provider for the companies below and supported by over 50 International companies guaranteeing that you work on the latest technology at all times.
Message from NFPC DirectorWe recommend “ REFRESHER TRAINING” based on a minimum of 3 years from the date shown on your course certificate obtained at the NFPC.Our Refresher Courses will involve both knowledge and skills developments and involve practical training. In all cases you will be brought up to date once again ensuring a better and safer all round work based performance.
Stage 1 Hydraulics –1 Day Refresher Training – Per Person, Cost = £350.00 ExcVAT (9am-5pm)Planned Dates: 2018 (max = 8 candidates per course)• 10 Sep• 24 Sep• 08 Oct• 22 Oct• 12 Nov• 26 Nov
If you feel confident that you do not needa Stage 1 Refresher, are you ready to progress on to our Stage 2 Courses.PLEASE REFER TO OUR RECOMMENDEDPROGRESSION ROUTE AND CHECK OUR WEBSITE
FOR ALL OF OUR COURSES.www.nfpc.co.uk
Stage 1 Hydraulics 3 days
Stage 2 Mobile Hydraulics 4 days
Stage 2 Industrial Hydraulics 4 days
CETOP LEVEL 1 QualificationH1 Hydraulics
COMPETENCE BASED- 2days
CETOP LEVEL 3-Advanced QualificationCOMPETENCE BASED
Mobile (MH3) or Industrial (IH3) 1 Year
Stage 2Pumps & Controls
3 day
Stage 2Proportional
Hydraulics3 days
Stage 2Hydraulic
Troubleshooting2days
Principles of Hydraulic
System Design3 days
(Industrial) Stage 2Winch Hydraulic
Systems3days
Stage 2ContaminationManagement/
Assessment2x1 days
Stage 2Accumulator Competence
2 days
Stage 2Safe Management
of Hydraulic Systems1 days
Stage 1 Electro-Pneumatics 3 days
Stage 2 Electro-Pneumatics (EP2)(Advanced)
Under development
CETOP LEVEL 1 QualificationP1 Pneumatics
COMPETENCE BASED- 2 days
Stage1Electrical/Electronics
relating toMOBILE Systems
3 days
Stage1Electrical/Electronics
relating toINDUSTRIAL Systems
3 days
CETOP LEVEL 2 QualificationIH2 Hydraulics
COMPETENCE BASED- 5 days
Introduction to Hydraulics 2 days
WE ALSO OFFERAPPRENTICE SUMMER SCHOOL
2 Week course (July/August)• Introduction to Hydraulics
• Stage 1 Hydraulics• CETOP H1 Qualification
PROGRESS TO:• Electrical/Electronic Route• OR any Stage 2 Course
BESPOKETRAINING
Visit the NFPC website www.nfpc.co.uk.
Use our FOC Online Self-Assessment Questionnaire to determine your
starting level.
Courses on REQUEST
Additional Courses offered : Net Costs/Person• PLC Workshops (1 day) £300.00• Water Hydraulics (2 days) £550.00• Fluid Power Mathematics (1day) £300.00• Principles of Hydraulic Hoses (1 day) £300.00• Hydraulic Troubleshooting (2 days) £650.00 • Servo Hydraulics Systems (1 day) £350.00• Closed Loop Systems & Control (2 days) £985.00• Safe Management of Hyd Systems (1day) £300.00• Contamination Management (1day) £300.00• Contamination Assessment (1day) £300.00• Winch Hydraulic Systems (3 days) £975.00
Introduction to Elec/Electronics 1 day Introduction to Pneumatics 1 day