-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 1
NANTAI AUTOMOTIVE TECHNOLOGY CO., LTD
TAIAN NANTAI EXPERIMENTAL EQUIPMENT CO.LTD Manager: Degang
Zhangmanager Mobile Phone:+86-13455388360 TEL: +86-538-6627598
FAX+86-538-6627679, +86-538-6627668 E-mail:
[email protected](MSN) [email protected](MSN)
[email protected]( MSN) [email protected](MSN)
[email protected] [email protected]
[email protected]
ICQ: 402039175 Skype: sanxiang1234 chinanantai1 Yahoo Massager:
[email protected] ,[email protected] QQ: 187096649
Google talk: [email protected], [email protected] Web
Site : www.nantai-china.com
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 2
DIESEL FUEL INJECTTION PUMP TEST BENCH
12PSB-IV
Digital controller
(English language)
(Russian language)
NT2001/NT2001PLC NTS619
NT3000
Computer controller
(English language)
(Russian language)
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 3
NTS815 electronic fuel delivery measuring system test bench z
Introduction
Diesel fuel injection test bench is design for customers
require. This series test bench adopt high quality frequency
conversing device, and it has characteristic with hi-reliability,
ultra-low-noise, energy save, high output torque, perfect
auto-protecting function and operate easy. It is the kind of
product with high quality and good price in our business.
Used for Bosch in line pumps of K,M,MW,A,B,BV,P(ZU,ZW,ZM) and
BOSCH rotative distributor injection pumps EP/VA,EP/VM,VE.F,also
used for Chinese pumps such as ,,,K,P7,BQ.etc.
FUNCTION 12PSB-IV NT2001/ NT3000/ NTS619
NT2001PLC
NTS815
1,Measurement of each cylinder delivery at any speed
2. Test point and interval angle of oil supply of injection
pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5..Experiment and adjusting of behavior of supercharging and
compensatory device
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor
pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.
10. Checking the sealing of injection pump body
11. Install tube of auto-sucking oil supply can check on oil
supply pump(including VE pump.)
12, Two operating systems (Computer control + Digital
control)
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 4
13, Digital control systems
14, Electronic fuel delivery measuring system
15, LCD touch screen
16, TRAVEL OF TOOTH BAR (On request) (On request) (On request)
(On request)
17, OIL LUBRICATE (On request) (On request) (On request) (On
request)
18, FORCED COLLING (On request) (On request) (On request) (On
request)
Technical characteristic
Standard accessory of test bench
For 12PSB/ NT2001/ NT2001PLC/ NT3000/ NTS815 etc test bench
Oil lubrication station
optional function of test bench
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 5
COMMON RAIL TEST SYSTEM
(1)COMMON RAIL INJECTOR TEST BENCH
PQ1000 PQ2000 CRI-2000
PQ1000, PQ2000, CRI-2000 used to test kinds common rail
injector, they adopt digital controller. PQ1000 and
PQ2000 need connect air pressure pump to normal working,
CRI-2000 have pump inside, it can work itself.
Function : 1, it can be used to test Bosch, Delphi, Denso,
Siemens injector. 2, check the injector starting pressure 3, check
the injector spray quality 4, check the seal of injector. 5, check
injection quantity and back oil quantity. 6, check the injector oil
flow 7, check the injector pre injection and main injection
NTS200 NTS300 NTS200/NTS300 COMMON RAIL TEST BENCH is the
professional test bench which is used for testing common rail
system, can finish the high-pressure common rail system functional
testing. NTS300 with inverter working more well.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 6
Function 1.Test injector brandsBOSCH, SIEMENS, DELPHI, DENSO. 2.
Test 1 piece of injector. 3. Test the pre-injection of common rail
injector. 4. Test the max. oil quantity of common rail injector. 5.
Test the cranking oil quantity of common rail injector. 6. Test the
back flow oil quantity of common rail injector. 7.Test the average
oil quantity of common rail injector. 8. Test the seal performance
of common rail injector. 9. Data can be searched and saved.
(2)CR3000,CR3000A,CR3000A-708 COMMON RAIL TEST BENCH
CR3000( Picture 1 ) CR3000(Picture 2) Product Functions CR3000
is for CR high pressure pumps is to provide the desired signal to
drive the solenoid in the pump being
tested. CR3000 common rail Tester can used for testing following
pumps:
BOSCH CP1-H BOSCH CP1-KBOSCH CP3DELPHI SIEMENS, DENSO HP2 AND
HP3. It has the functions to test the Electromagnetic and
Piezoelectric(optional function) injectors.
It also can test 6 common rail injectors in one time.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 7
CR3000A (MODE1) CR3000A (MODE2) CR3000A-708 Mouse and
keyboard------------------------------------ CR3000A (MODE1)
,CR3000A-708 LCD touch screen------------------------- CR3000A
(MODE2)
CR3000A /CR3000A-708has all common rail pump, injector data
inside. CR3000A/CR3000A-708 COMMON RAIL TEST BENCH is mainly test
for common rail pump and injector. Also it is continuous fuel
delivery analysis computerised measuring system for conventional
and new diesel injection systems. The electronic fuel delivery
measuring system is compulsory for modern diesel injection system
testing. It guarantees a high level of reproductivity of the
measured valuse. CR3000A COMMON RAIL TEST BENCH is the professional
test bench which is used for testing common rail system, can finish
the high-pressure common rail system functional testing.
>>>System Application: The system is suitable for
detection of BOSCH, DENSO, DELPHI and SIEMENS common rail pump and
injectors. Such as CP1, CP2.CP3, HP3 series injector pump and the
type of Electromagnetic injectors, It also can test 6 common rail
injectors in one time. >>> Technical parameters
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 8
1, Main motor speed: 0-4000 r / min can be adjustable. 2, Motor
power: 7.5KW, 11KW, 15KW, 18.5KW optional. 3, Fuel Injector open
voltage Control range: 12V, 80V, 150V Control accuracy: phase
adjustment 4, Injector opening frequency Control: 0-1000HZ Control
accuracy: 1HZ 5, Fuel Injector Hold Time Control: 0-65535us 6
Delivery Oil CountControl: 0-1000 times Control accuracy: 1 times
7, Fuel pressure control Control: 0-2000bar Control accuracy: 1bar
8, Electronic power: 3 PHASE 380V or 3 PHASE 220V
>>>Optional function: 1, Test piezo injector function.
2,Test HP0 pump function. 3, With Bosch DRV VALUE 4,Checking the
pump flowing.
(3) CRS200,CRS300 Common Rail Tester System
CRS200 connect with NTS815 CRS200 CRS200 ACCESSORIES
CRS300 connect with NT2001 CRS300 CRS300 ACCESSORIES
The function of the tester for CR high pressure pumps is to
provide the desired signal to drive the solenoid in the pump being
tested. CRS200/CRS300 common rail Tester can used for testing
following pumps: BOSCH CP1CP2CP3DELPHI, SIEMENS, DENSO HP2 AND HP3.
It also can test 6 common rail injectors in one time.
>>>CRS300 is computer system, it include common rail data
inside. Main technical parameters 1. Injection open pressure: 5.
Pump model :CP1,CP2,CP3,HP0
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 9
Control accuracy: stage regulator 2. Injection open frequency:
Control range: 0-1000HZ Control accuracy: 1HZ 3. Injection open
hold time Control range: 0-65535us Control accuracy: 1us 4.
Delivery counts Control range: 0-1000 Control scope: 24V, 80V,
150V, Control accuracy: 1times
6. Fuel pressure control Control range: 0-200Mpa Control
accuracy: 1Mpa Control way: PID 7. Power:220V 8. Work temperature:
0-40 9. Relative humidity: 20-90%RH
(4)Common Tail Tester Simulator
Photo Mode Describe
CR2000 common rail tester
It can test 6 common rail injectors in one
time 1. PUMP-CR2000 , it for test common rail pump 2. EM-CR2000
, it is used to test electromagnetic injector 3. PE-CR2000 it is
for test piezo injector 4. ACCESSORIES (rail, pressure sensor, oil
pipe, coupling and so on)
CR2000A common rail tester
It can Electromagnetic injector and
common rail pump
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 10
EM-CR1000
It can test Electromagnetic injector, One by one. For BOSCH,
DENSO, DELPHI injector
PE-CR1000
It can test Piezoelectric injector, One by one. For SIEMENS
injector
CR1000
It can test Electromagnetic and Piezoelectric injector injector,
One by one. For BOSCH, DENSO, DELPHI, SIEMENS injector
CRP680
It is used to test these pump: BOSCH CP1BOSCH CP2BOSCH CP3
DELPHISIEMENS, DENSO HP0,HP3 AND HP4.
PQ400-CR2
The repair tester for Common Rail Injector simulates the outputs
of an Engine Control Unit (ECU), by providing fuel injection
control signals, of which the parameters may be set by a user, to
drive the solenoid of a common rail injector.
CR1000A
It can be used to test electromagnetic injector, 1 pc one
time.For BOSCH, DENSO, DELPHI injector It is EM-CR1000+S60H nozzle
tester
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 11
Electronic pump tester
Photo Mode Describe
VP37 EDC PUMP
TESTER
It Mainly used for testing Electronic VP37 Pumps.
VP44 PUMP TESTER
It is used to test BOSCH VP44 pump
DENSO ECD-V3 & V4,
ECD-V5 pump tester
simulator
It is for DENSO ECD-V3 & V4, ECD-V5 pump
Zexel RED4 Electronic
control In-line pump
tester
It can adjust all kind of the RED4
Eletronic speed device in-line pump
made by Japan Zexel Company. The
functions and charateristic of the
controller as well as the testing data are
completely same as the original one.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 12
EUI/EUP Tester system
It can test kinds of EUI/EUP injector, you only need to change
different adaptor, now we can provide 6kinds adaptor
HEUI TEST BENCHcomputer system
Improve fuel economy & enhance performance
Measurement fuel delivery of four HEUI injectors
Sealing test for injectors upper seat of the solenoid control
valve.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 13
PT CUMMINS SERIES
EPT2000 PT/EUI injector flow test bench
It is special equipment used to provide adjustment of flux test
for
CUMMINS PT fuel injector. It can simulate the running
condition
of engine. It has high measure precision, quick sampling
speed,
extraordinary property, and convenient operation.
Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD
fuel injectors flow test adjustment or spurt inclination
test.
It also can test the flow of all EUI/PT injector and also
EUP.
PT 212 PT fuel pump Test bench
PT 212 PT fuel pump Test bench is special equipment used to
provide test and calibration for CUMMINS PT fuel pump. It has
abundant functions, high measure precision, and fast sampling. For
instance: Fit for: PT(G), PT(G)VS, PT(G)MVS, PTGSVS, PTGAFC,
PTGAFC-VS, PTR, PTH-VS fuel pumps etc and damping ASA valve.
Functions 1.Gear pump pressure and vacuum test 2. Idle speed test
3. Weight assistant pressure test 4. Pressure and flow test in
every check point 5. AFC test 6. Oil stopping test 7. Route test
ofthrottle 8. Oil return test of throttle 9. ASA valve test 10. EFC
test 11. Shut down valve test
PT 201 PT fuel pump test bench
It is special equipment used to provide test and calibration
for
CUMMINS PT fuel pump. It matches the driving system of fuel
injection pump stand, and has strong integrative function.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 14
PT101 Top Stop
Setting Fixture
Top Stop Setting Fixture-All PT (type D), STC (HVT), and
Hyperbar Top Stop Injectors. Measuring fuel injector volume
completed, we must test the injector plunger subassembly.
(including STC (HVT) and hypervar top stop injectors). This Top
Stop Setting Fixture used to the test of the injector. After the
leakage testing of the injector is completed, the injector can be
assembles to the point where the plunger top stop, or plunger
travel setting can be made.
PT 301 Leakage Tester
It is special equipment used to provide seal test for PT CUMMINS
Fuel injectors. It has quick sampling speed, extraordinary
property, and convenient operation. Fit for: 5/16" and 3/8"PTB,
PTC, PTD and 3/8" overhead PTD fuel injectors seal test. Functions:
1.. PT fuel injector cylinder block seal 2. PT fuel injector
cylinder seal 3. PT fuel injector ball check valve seal
PT 800 PT fuel pump Injector
Fit for: PTGPTGVSPTGMVSPTGSVSPTGAFCPTGAFC-VSPTHVSPTRfuel pumps
etc. Fit for: 5/16" and 3/8"PTBPTCPTD and 3/8" overhead PTD fuel
injectors etc
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 15
NOZZLE TESTER
PJ-40 Nozzle tester
It employ the characters of boost speed, high-stability,
reasonable structure, flexible operation, fix convenience. PJ-40
Nozzle tester is the ideal instrument calibrating and testing fuel
opening pressure, atomization, fuel angle and confined of needle.
Main technical characteristic 1. max pressure 40MPa ,2. size of
outside 320300500 3. net weight 30kg ,4.pressure gauge range
0-60Mpa
PS-400A NOZZLE TESTER
1. Initiative injecting press of injector 2. Sound of needle
valve vibartion 3. spraying shape 4. Sealing function of needle
valve and nozzle body mating pair 5. Sealing function in sreaponse
to press.
PS60H NOZZLE TESTER (BOSCH TYPE)
it Is used to adjust and calibrate the injection nozzle opening
pressure and to carry out leakage, spray pattern and chatter
characteristic tests. For nozzle size R, S and T. In basic design
with 0-40 Mpa (0-400 bar) pressure gauge. In conjunction with a
specially ordered pressure gauge, this tester can also be used for
testing light crude oil injection valves.
PQ400 double springs Nozzle tester
Allows to test and to calibrate diesel double springs
injectors.
Equipment with a manometric gauge for internal pressure
regulation
Digital display permits to calibrate the injector opening
pressure
One shot and continuous spraying test
rate of oil pressure and air pressure is 50:1
PQ400 double springs Nozzle tester
Allows to test and to calibrate diesel double springs
injectors.
Equipment with a manometric gauge for internal pressure
regulation
Digital display permits to calibrate the injector opening
pressure
One shot and continuous spraying test
rate of oil pressure and air pressure is 50:1
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 16
QCM200 Gasoline injector tester and cleaner This product is
applicable to diagnose and clean fuel injectors of various cars
manufactured worldwide, improving stability, reliability and
reducing pollution. It can perform automatic detecting, analyzing
and cleaning.
Main functions It can not only diagnose and analyze the
performance of the fuel
injector, but also inspect dribbling, atomization, injecting
angle, distributive value, uniformity coefficient, and their on off
cycle, etc of single or multiple fuel injectors.
Can do reverse flushing, flush-back cleaning, ultrasonic
flushing, and disaffiliation-free flushing to one or more fuel
injectors
Automatically simulate the overall process under various pulse
width and engine speed. The operation status of the fuel injectors
can also be observed whether at acceleration and deceleration.
Can manually set time, pulse width and rotation speed of the
fuel injector, and observe the performance under varied parameters.
Ease and convenience of operation.
Can determine the shortest on-off cycle and the quality of the
injector Can do oil circuit testing, and disaffiliation-free
flushing to the engine
QCM300 FUEL PUMP TESTER
QCM300 FUEL PUMP TESTER is for gasline pump.
It can test the Comprehensive performance of variety of
automotive electric fuel pump assembly. Such as Voltage, oil flow,
oil pressure. It can be adjusted:
1. Simulation of oil pressure at various conditions of vehicle
fuel pump. 2. The simulation of fuel supply at various conditions
of vehicle fuel pump .
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 17
NTC Diesel Fuel Tank Cleaning Tester
NTC diesel fuel tank cleaning tester is suitable for cleaning
various
models of diesel fuel tank. This product design is unique,
leading
technology, simple operation, and can effectively remove
impurities and
water.
Feed ( Transfer )Pump Test Bench
1. Brand new appearance design, good looking;
2. Continuous test of multiple stations, with high production
efficiency;
3. High precision oil, timing device, high measurement
precision;
4. Simultaneous test of different oil transfer pumps;
5. Temperature of oil is controlled automatically.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 18
TEST BED
TURBOCHARGER BALANCE ACHINE
NT-D1
Digital controller It is used to test turbocharger rotor
NT-D2
Computer system. It is used to test turbocharger rotor
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 19
NT-D3
NT-D3 Turbocharger Balancing Machine is used for
dynamic balancing and testing of small and
medium-sized core assemblies.
SCANNER
F3-D(Heavy Duty)
It provides multi-language platform to meet different
customers
demands. Products with integrated structural design, to achieve
12V,
24V power supply automatical changover. single-track working
mode
and superlarge touch screen operation, exquisite look and so
on,
these special designs make you feel cozy and freely. It
adopts
smooth features drive technology and has good extensibility,
which
not only satisfies for the modern vehicle ECU communication
bus
testing, but also the vehicles appearing in the future
F3-G (world cars +heavy duty)
F3-G is the newest version of multi-functional intelligentized
gasoline
and heavy duty truck diagnostic scanner universal automotive
diagnostic computer. F3-G adopts the advanced modularized
design
technology which is capable of diagnosing and learning a variety
of
European, United States, Asian gasoline, truck power system
quickly
and easily. F3-G is the only auto diagnostic scanner that can
test
both gasoline and heavy duty trucks in one machine
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 20
TURBOCHARGER
Our use of the most advanced technology and high-quality
manufacturing standards run off-turbocharger.
Our products can be 25 to 196 kW (35 horsepower to 360 hp)
engine matching. Given the turbocharger
high-speed rotating machinery, users should be familiar with the
technical information in the related
attention, in order to ensure the reliable functioning of
supercharger and the longest life. Turbocharger used
for a period of time, we propose to replace only parts of the
pure components made by our factory.
Our comprehensive product range includes more than 10,000
different spare parts for the following truck,
trailer & bus. MERCEDES-BENZ, SCANIA, VOLVO, DAF & MAN
HINO, MITSUBISHI, FUSO, NISSAN & ISUZU
HYUNDAI. High quality spare parts are the first choice in
Chinese aftermarket for commercial vehicles. High
quality at the competitive prices.
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 21
STANDARD INJECTOR
STANDARD INJECTOR
Name ISO Standard Bosch Code Diameter(mm) Opening Pre.(Mpa)
ISO7440 A14-17.2 0 681 343 009 17.2+0.3
Pintle Type ISO7440 A14-14.7 1 688 901 000 14.7+0.3 ISO7440
A44-20.7 1 688 901 015 0.4 20.7+0.3 ISO7440 A54-20.7 1 688 901 016
0.5 20.7+0.3 ISO7440 A64-20.7 1 688 901 017 0.6 20.7+0.3 ISO7440
A74-20.7 1 688 901 018 0.7 20.7+0.3 ISO7440 A84-20.7 1 688 901 019
0.8 20.7+0.3
Hole Type
ISO7440 A64-17.2 1 688 901 020 0.6 17.2+0.3 ISO7440 B64-20.7 1
688 901 101 0.6 20.7+0.3 ISO7440 B64-25.0 1 688 901 102 0.6
25.0+0.3 ISO7440 B74-20.7 1 688 901 103 0.7 20.7+0.3 ISO7440
B74-25.0 1 688 901 104 0.7 25.0+0.3 ISO7440 B84-20.7 1 688 901 105
0.8 20.7+0.3 ISO7440 B84-25.0 1 688 901 106 0.8 25.0+0.3 ISO7440
B54-20.7 1 688 901 109 0.5 20.7+0.3
Low-Inertia Hole Type
ISO7440 B54-25.0 1 688 901 110 0.5 25.0+0.3
COMMON RAIL TOOLS
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 22
No .60 Full set common rail tools USD550 No.61 Simple common
rail tools USD250
No.62 Common rail injector adaptor
USD250. 18kg
No.63 Rapid Connector For Nozzle Holder(2
model:10mm,8mm):USD3/PC
No.64 Common rail oil pump assembly and
disassembly tools USD160.
No.65 Common rail Injector demolition Truck
tools USD130
No.66 CR-A Rail Pressure Tester USD240 No.67 Meter holder
USD260
No.68 Grinding tools for valve assembly
(with high speed drill bench) :USD300 7kg
No.69 Leaking testing tools for valve
assembly USD240 4kg
No.70 Pump Rotating tools
(for CP1,CP3 pump) :USD200
No.71 Pump Rotating tools
(for CP2,U2 pump) :USD100
No.72 Electron microscope: USD310 No.73 Measuring tools of valve
assembly
USD120
No.74 Measuring tools of shims USD60 No.75 H10 Backflow kit (for
DENSO
injector):USD15
No.76 H20 Backflow kit (for caterpillar
injector):USD15
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 23
No,77 Multi-functional adaptors USD80 No,78 Multi-functional
adaptors USD35 No,79 Multi-functional adaptors USD80
No,80 Bosch fuel collector USD30 NO,81 Special puller
(for BOSCH,DENSO,DELPHI pump valve)
Common Rail Spare Parts
1,BOSCH Common Rail Injector Repair Kit
2,Valve Assembly
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 24
3,High-pressure common rail injector oil adjustment shims
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 25
3,Other model
Tools for different Special purpose Pumps
Such as PQ400 Double springs Nozzle tester, PS400A NOZZLE TESTER
,Tools for PW pumps , ABZ PUMPS, VE PUMPS , P TYPE PUMPS P7100
P3000 ,TOOTHED BAR GAGUEPRE-TRAVEL GAGUEMULTI-FUNCTIONS ROTATIONAL
TOOLS etc same as the pictures in our website:
www.nantai-china.com
NO.01 PJ-40 NOZZLE TESTER
USD70.00/PC 18.5kg
NO.02 PS400A NOZZLE TESTER
USD50.00/PC 5.5KG
NO03 S60H Nozzle tester
USD70.00/PC 3.7KG
NO.04 (I,II,III) General Tool
USD50.00/SET
NO.05:P type pump Tools
USD35.00/SET 3.7kg
NO.06 VE pump Tool
USD35.00/SET 3.2kg
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 26
NO.07 Tooth bar Travel Tester
USD25.00/SET 0.39kg
NO.08 Tooth bar travel rulers
USD10.00/SET 0.44kgwill stop produce later
NO.09 Pre-Travel Gauge
USD25.00/PC 0.38kg
NO.10 VE pump Piston Journey tester
and VE pump Pressure tester
USD35.00/SET 0.31kg
NO.11PN, Pw, PB Tool USD35.00/SET 2.1kg
NO.12 P7 pump Tool
USD35.00/SET 2.3kg
NO.13Cummins LAMA USD20.00/PC
NO.14 MW Maintainer Tools
USD60.00/SET 0 .31*3=0.93kg
NO.15Beijing pump P7100Maintainer USD20.00/SET
NO.16 M10P7100Maintainer USD20.00/SET
NO.17 P7100 Tools
USD20.00/SET
NO.18 P7100 Tools
USD20.00/SET
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 27
NO.19P7100 Tools USDD20.00/SET 2.92kg
NO.20PE Pump Depressor USD18.00/PC 1.74kg
NO.21 VE Pump Elements
USD14.00/SET ( a little different from the real
products)( High quality , similar with Bosch)
NO.22 AO VEI Tool
USD15.00/SET ( only include the right
one)
NO.23 P7100 Tools
USD20.00/SET 2.92kg
NO.24Disassemble Benz Pump tools USD15.00/PC
(Same Products as the photo No.41)
NO.25Five-flowers Wrench USD8.00/SET ( only include one
longer
and one short)
NO.26. Disassemble P9 pump Tool
USD60.00/set
(present no stock)
NO.27 Disassemble Flyweight Tool
USD25.00/SET 2.86kg
1set= 6PCs
( present no stock)
NO.28 Tear-Open Advance Device Screw USD40.00/SET
NO.29.Fuel Injection Rotating Tools
USD70.00/SET 16kg
NO.306112, 4112 LAMA USD35.00/PC
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 28
NO.31 Slide bars for disassemble
injectors USD35.00/SET
NO.32Caterpillar -Tool USD10.00/PC (same tools as NO42)
NO.33STEYR SLEEVE USD10.00/PC
NO.34 Small Stopper
USD10.00/SET
NO.35 Bosch Pump Maintainer USD48.00/SET
0.5KG/SET 1SET=6PCS
NO.36JETTA TOOL ( Three Wrench) USD8.00/PC
NO.37A Type Pump Thread USD15.00/SET
1SET=12PCS 0.1KG/6PCS
NO.38Maintainer USD20.00/SET
0.3KG/SET 1SET=6PCS EACH
NO.39 Pump Scratcher
USD15.00/PC
4.72kg/pc
NO.40Tear open P3000.P2000 P7100 Bearing Scratcher
USD25.00/PC
NO.41Disassemble Benz Pump tools USD20.00/PC
NO42:Caterpillar-Tool Injection Tool
USD10.00/SET
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 29
NO.43:Caterpillar-Tool
USD10 .00
NO.44: Caterpillar-Tool
USD10.00/pc
NO.45 5M pump Socket Tools USD15.00/PC 1set=1PC
NO.46: 5M pump Tool
USD100/SET
NO.47: 6110 Tear-Tool Gear Tool
USD30.00/SET According to real tools
NO48: Caterpillar Flange
USD40.00/SET
NO.49 Spare Parts: Nozzle, Plungers,
Delivery Valve, Head Nozzle
NO. 51 PQ400 Double springs Nozzle Tester
450/PC
ULTRASONIC TANK CLEANER
Mechanical Timer and Heater Digital Timer and Heater Digital
Timer and Heater
(Adjustable power)
Cleaning Application PCB, jewelry, electronic components, car
parts, computer parts Laboratory instruments, clock & watches,
eyeglasses, contact lens, dentures, dental instruments, medical
tools, DVD & VCD, golf,
-
http://www.nantai-china.com
Degang Zhang(manager) 008613455388360 30
table-ware, printer inkjet, seal and comb, toothbrush, baby
feeder, etc.
Company profile NANTAI AUTOMOTIVE TECHNOLOGY CO., LTD (Taian
Nantai Experimental
Equipment Co., Ltd.), located in Taian City Shandong Province
P.R. China, is the leading manufacturer specializing in producing
the Diesel Fuel Injection System Tester in China, is available for
traditional diesel fuel injection pump test bench, PT-CUMMINS pump
and injectors Test stand, VP37 test system, Bosch VP44 test system,
Bosch H pump & Zexel TICS in-line electronic controller pumps
test system, EUI/EUP test system, Common Rail Pump Tester , CRDI
Common Rail Diesel InjectorsTest Bench, Nozzle Tester, spare parts
of Pumps, and special assemble and disassemble tools of the
pumps.
The Diesel Fuel Injection Pump Test bench adopts the
variable-frequency and variable-speed technique, which is divided
into five series-12PSB, NT2000, NT2001,NT3000NTS815 series, and
there are over thirty kinds of test stands with a complete type and
size, which can meet all kinds of users' demands to equipment.
Common Rail Test bench mainly divided into PQ1000 P2000 CRDIs and
CR2000 CR200A CRS200, etc. products which are not only can test
different kinds of common rail injectors, its up to test six
cylinders together, but also can test common rail pumps, Bosch
CP1-k, CP1-H, CP2, CP3, Delphi, Denso, Siemens etc., advanced
technology, catches the steps of international development,
appropriate price, meet different customers demands. PT CUMMINS
pumps and injectors series, mainly divided into PT212, PT301,
PT201, PT414, PT800 five series, complete types. Its production
process is advanced. Its technique has ranked the International
leading level.
The company's research and development capabilities are rich and
the test measure is complete, and rewards the ISO9001-2000
CERTIFICATE, CE CERTIFICATE. Taian Nantai Experimental Equipment
Co., Ltd. has a strict internal management and has established a
complete and reliable quality assurance system. The company's
product sale network has spread all over the world. The after-sales
service of product has a system of its own, which can provide the
best service for users timely. The company's aim is "honest and
trustworthy operation and brazing new trails in science and
technology".