Name Classificati on Description Products PET (polyethylene terephalate) Thermoplasti c Moderate chemical resistance, most commonly used in blow moulded products. Beer and soft drink bottles, insulation tapes, electrical plug sockets. uPVC & PVC (Polyvinyl chloride) Thermoplasti c Good chemical resistance, resistant to weathering, hard, tough and lightweight. uPVC – pipes and guttering. PVC – hose pipes and cable insulation. LDPE (low density polyethylene) Thermoplasti c Good chemical resistance, light weight, low stiffness and rigidity. Detergent bottles, toys and carrier bags. HDPE (high density polyethylene) Thermoplasti c High density, good stiffness, good chemical resistance. Crates, bottles, buckets and bowls. PS (polystyrene) Thermoplasti c Low impact strength, light, colourless. Expanded PS – floats and good heat insulator. Packaging, disposable cups. Expanded – heat & sound insulation. PP (polypropylene) Thermoplasti c Lightweight, food safe, good impact strength, good chemical resistance. Food containers, medical equipment. ABS Thermoplasti c High impact strength, good toughness and strength, scratch resistant and lightweight. Mobile cases, safety helmets, toys, car parts, kitchen products. PC Thermoplasti c Good chemical resistance and very tough, but expensive. Protective shields, safety helmets, hairdryer bodies. Acrylic Thermoplasti c Food safe, tough, durable and easy to machine. Light units, shop signage. Plastics Revision!
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Name Classification
Description Products
PET(polyethylene terephalate)
Thermoplastic Moderate chemical resistance, most commonly used in blow moulded products.
Beer and soft drink bottles, insulation tapes, electrical plug sockets.
uPVC & PVC(Polyvinyl chloride)
Thermoplastic Good chemical resistance, resistant to weathering, hard, tough and lightweight.
uPVC – pipes and guttering.PVC – hose pipes and cable insulation.
LDPE(low density polyethylene)
Thermoplastic Good chemical resistance, light weight, low stiffness and rigidity.
Detergent bottles, toys and carrier bags.
HDPE(high density polyethylene)
Thermoplastic High density, good stiffness, good chemical resistance.
Crates, bottles, buckets and bowls.
PS(polystyrene)
Thermoplastic Low impact strength, light, colourless.Expanded PS – floats and good heat insulator.
Packaging, disposable cups.Expanded – heat & sound insulation.
PP(polypropylene)
Thermoplastic Lightweight, food safe, good impact strength, good chemical resistance.
Food containers, medical equipment.
ABS Thermoplastic High impact strength, good toughness and strength, scratch resistant and lightweight.
Mobile cases, safety helmets, toys, car parts, kitchen products.
PC Thermoplastic Good chemical resistance and very tough, but expensive.
Protective shields, safety helmets, hairdryer bodies.
Acrylic Thermoplastic Food safe, tough, durable and easy to machine. Light units, shop signage.
Urea Formaldehyde Thermoset Rigid, hard, good strength, heat resistant and good electrical insulator.
Electrical fittings.
Epoxy Resin Thermoset High strength (if used in GRP), good chemical and wear resistance.
Surface coating, encapsulation of electronic components.
Melamine Formaldehyde
Thermoset Rigid, good strength and hardness, scratch resistant.
Tableware and decorative laminates.
Plastics Revision!
Instructions: Print the cards and either use the table and write on the lines the appropriate plastic and method of production or try to guess and then check against the table. You can then fold the cards in half and hide the answer.
Related Documents
