Name of Work: Interior and Furnishing Works at Ground ... BOQ.pdf · member for door frame and additional framework and ... members to be fixed to RCC ceiling but the area of ...

BOI - Ground Floor, H-2, Connaught Circus

S No Description AMOUNT (Rs.)

1 INTERIOR AND FURNISHING WORKS:-

I Partitions and Panelling

II Storage

III Doors and Glazing

IV Finishing and Ceiling Works

V Counters and TablesVI Miscellaneous

2 CIVIL & SANITARY WORKS:-

I Flooring

II Civil WorksIII Sanitary Installations

Note :1

1

The rates quoted by the Contractor are inclusive of all duties and taxes of all government, municipal or any other statutory body applicable from time to time. Also, the quoted rates are applicable for works both at day and night (if needed) and shall include working at all heights and levels as per site condition and any liasoning required with local authority (like NDMC and the like) for smooth execution of works. Nothing extra shall be payable in this regardExisting Height of roof is 4 m +. Nothing extra shall be payable in this regards.

Summary Of Costs for Interior Works

Name of Work: Interior and Furnishing Works at Ground Floor, H-2, Connaught Circus, New Delhi

TOTAL COST OF CIVIL & SANITARY WORKS,(B)

TOTAL COST OF INTERIOR AND FURNISHING WORKS, (A)

TOTAL COST (A) + (B)

Signature Seal of Contractor 48

Ground Floor, H-2, Connaught Circus

INTERIOR AND FURNISHING WORKS:-

S. No. Description Unit Qty. Rate Amount

I. PARTITIONS AND PANELLING:-

1(a). Full Height Partition: Providing and fixing in positionFull Height partition in framework of 600 X 600 mm grid(horizontally and vertically) comprising of 50 mm X 50mm heavy duty aluminium section with 6 mm thickplywood on both sides finished with 1 mm thick laminate'5003- Phillipene Teak (PST)'/ '9003 Bronze Foil (SRL)'of make Greenlam/ 'UGM' Frosty White of makeSunmica/ approved make including making grooves as/Architect. Item to include 65 X 65 mm teakwood member for door frame and additional framework andteakwood beading required for providing glazing. Allexposed teakwood surfaces, grooves and the like to befinished in melamine polish of matching laminate colourincluding all necessary fittings and SS hardware ofmake hettich/ hafele/ dorma. The rate to includeprovision of extra frame work as necessary for skirtingand making cut-outs for electrical switches, switchboxes, conduiting, door/ glazing as per drawings.

Sqm 230.00

Note:- a) In case of false ceiling, the vertical aluminiummembers to be fixed to RCC ceiling but the area ofpartition payable will be below the false ceiling only. b)Measurement of height shall be taken from finishedfloor only, in case of varying heights on either side ofpartition, average height shall be considered. c)Openings/ door/ glass shall not be measured forpayment. d) Contractor to use proper masking tapeswhile polishing grooves etc. to prevent any damage tolaminate. e) The direction of grains in veneer shall be asper Architect. Nothing extra shall be payable in thisregard.

1(b). Same as above but finishing with 4 mm thick teakveneer on both sides of make Green Decowood/approved make including making grooves as/ Architect.

Sqm 22.00

BILL OF QUANTITIES FOR INTERIOR FURNISHING WORKS FOR GROUND FLOOR AT BANK OF INDIA, STAR HOUSE, H-2, CONNAUGHT CIRCUS, NEW DELHI

Note:- The rates quoted by the Contractor are inclusive of all duties and taxes of all government, municipal orany other statutory body applicable from time to time. Also, the quoted rates are applicable for works both atday and night (if needed) and shall include working at all heights (Height of the site is 3.5 m+) and levels asper site condition and any liasoning required with local authority (like NDMC and the like) for smoothexecution of works. Nothing extra shall be payable in this regard.



1(c). Same as above but finishing with 4 mm thick teakveneer of make Green Decowood/ approved make onone side and with 1 mm thick laminate '5003- PhillipeneTeak (PST)'/ '9003 Bronze Foil (SRL)' of makeGreenlam/ 'UGM' Frosty White of make Sunmica/approved make on other side including making groovesas/ Architect.

Sqm 120.00

1(d). Same as above but finishing with wall paper as perapproved make on one side and with 1 mm thicklaminate '5003- Phillipene Teak (PST)'/ '9003 BronzeFoil (SRL)' of make Greenlam/ 'UGM' Frosty White ofmake Sunmica/ approved make on other side includingmaking grooves as/ Architect.

Sqm 15.00

2. Low Height Partition: Providing and fixing in positionsolid Low Height partition including 12 mm thicktoughened glass of approved make upto height of 1300mm in framework including door in 600 X 600 mm grid(horizontally and vertically) comprising of 50 mm X 50mm heavy duty aluminium section with 6 mm thickplywood on both sides finished with 1 mm thick laminate5003- Phillipene Teak (PST)'/ '9003 Bronze Foil (SRL)'of make Greenlam/ 'UGM' Frosty White of makeSunmica/ approved make including making grooves as/Architect. Item to include 65 X 65 mm teakwoodmember for door frame and top beading of size 15 X 75mm for partition and polyster/ poly viscuous cladmagnetic board as per directions of the Bank/ Architect.All exposed teakwood surfaces, grooves and the like tobe finished in melamine polish of matching laminatecolour or as directed including all necessary fittings andSS hardware of make Hettich/ Haffele/ Dorma. The rateto include provision of extra frame work as necessaryfor skirting and making cut-outs for electrical switches,switch boxes, conduiting as per drawings.

Sqm 85.00

Note:- a) Measurement of height shall be taken fromfinished floor only, in case of varying heights on eitherside of partition, average height shall be considered. b)Glass wherever provided shall be measured forpayment. c) Contractor to use proper masking tapeswhile polishing grooves etc. to prevent any damage tolaminate.



3(a). Wall Panelling: Providing and fixing in position wallpanelling in 600 X 600 mm grid (horizontally andvertically) comprising of 25 mm X 50 mm heavy dutyaluminium section with 6 mm thick plywood on one sidefinished with 1 mm thick laminate '5003- Phillipene Teak(PST)'/ '9003 Bronze Foil (SRL)' of make Greenlam/'UGM' Frosty White of make Sunmica/ approved makeincluding grooves as/ Architect. The rate to include forprovision of extra frame work as necessary for skirtingand making cut-outs for electrical switches, switchboxes, conduiting, receiving A.C.'s etc. as per drawings.All exposed teakwood surfaces, grooves and the like tobe finished in melamine polish of matching laminatecolour or as directed. The wood frame work to beapplied with 2 coats of fire retardent paint and 1 coat ofanti-termite wood preservative all complete as per thedrawings and directions of Engineer-in-charge/ Architectand drawings.

Sqm 350.00

Note:- a) Incase of wall not being true to plumb extrashims of kail wood shall be provided. Nothing extra shallbe payable in this regard. b) The direction of grains inveneer shall be as per Architect. Nothing extra shall bepayable in this regard. c) Contractor to use propermasking tapes while polishing grooves etc.

3(b). Same as above but finishing with 4 mm thick teakveneer of make Green Decowood/ approved makeincluding making grooves as/ Architect.

Sqm 25.00

3(c). Same as above but finishing with wall paper as perapproved make as/ Architect.

Sqm 10.00

4. Providing and fixing glazed door and fixed glazing (fullheight glass partition) with 12 mm thick toughened glassof approved make with all SS patch fittings (Hettich/Haffele/ Dorma) and frosting as per drawing. Item toinclude floor springs, lock, 300 mm long D- handles andother necessary hardware of Stainless Steel of makeHettich/ Haffele/ Dorma all complete as per thedirections of Architect/ Engineer-in-charge.

(a) Openable door Sqm 16.00(b) Fixed Glazing Sqm 77.00(c) Same as above but for Automatic Sensor door with

remote control systemSqm 5.00

Total of S.H. (I) of Partitions and Panelling

II. STORAGE:-



5. Providing and fixing full height storage (upto 2600 mmhigh) and 450 mm deep as shown in details/ drawingwith all sides, shelves to be 19 mm blockboard with 12mm thick commercial plywood to be fixed at the backand finished with 1 mm thick laminate '5003- PhillipeneTeak (PST)'/ '9003 Bronze Foil (SRL)' of makeGreenlam/ 'UGM' Frosty White of make Sunmica/approved make on all exposed outside surfaces and 0.8mm thick laminate on all inside surfaces. The shutters tobe 19 mm thick blockboard with postformed edges andfinished with 0.6 mm thick laminate suitable forpostforming. The sides/ bottom of the drawer shall bemade out of 12 mm thick commercial plyboard andfinished with 0.8 mm thick laminate. All edges shall befinished with PVC edge banding (hot-pressed) allcomplete including S.S. long handles, magneticcatchers, self closing hinges/ telescopic hinges ofHettich/ Hafele/ Ebco etc. Contractor to use propermasking tapes while polishing grooves etc. to preventany damage to laminate.

Sqm 70.00

The item shall include melamine polishing to thegrooves and the like to match with specified laminateand inside/ side surfaces to be finished in laminate allcomplete to the satisfaction of Architect/ Engineer-in-charge. [Front elevation shall be measured forpayment.]

6(a). Providing and fixing low height storage (upto 1300 mmhigh) and 450 mm deep as shown in details/ drawingwith all sides, shelves to be 19 mm blockboard with 12mm thick commercial plywood to be fixed at the backand finished with 1 mm thick laminate '5003- PhillipeneTeak (PST)'/ '9003 Bronze Foil (SRL)' of makeGreenlam/ 'UGM' Frosty White of make Sunmica/approved make on all exposed outside surfaces and 0.8mm thick laminate on all inside surfaces. The top shallbe finished with 1 mm thick laminate over 19 mm thickblockboard all complete. The shutters to be 19 mm thickblockboard with postformed edges and finished with 0.6mm thick laminate suitable for postforming. The sides/bottom of the drawer shall be made out of 12 mm thickcommercial plyboard and finished with 0.8 mm thicklaminate.

Sqm 55.00



All edges shall be finished with PVC edge banding (hot-pressed) all complete including S.S. long handles,magnetic catchers, self closing hinges/ telescopichinges of Hettich/ Hafele/ Ebco etc. Contractor to useproper masking tapes while polishing grooves etc. toprevent any damage to laminate. The item shall includemelamine polishing to the teakwood surfaces to matchwith specified laminate and inside/ side surfaces to befinished in laminate and providing of 8 mm thick cleartoughened glass with bevelled edges at the top ofstorage all complete to the satisfaction of Architect/Engineer-in-charge. [Front elevation shall be measuredfor payment.]

6(b). Same as above but finishing with 4 mm thick teakveneer of make Green Decowood/ approved make

Sqm 10.00

7. Providing, fabricating and fixing in position as per layoutplan modular kitchen cabinets etc. below worktop (600mm deep)1. The cabinet framework/ carcass including top & rearpanels, shall be made up of 19 mm thick BWP plywood(kitply gold, greenply, or approved equivalentconforming to IS 710) including providing 1 mm thicklamination of make Grennlam/ Sunmica/ approvedmake, factory machine pressed of approved shade andall the exposed edges of the plywood shall be coveredwith factory machine pressed pvc edge banding/ lipping1.8 mm thick etc. as directed. The verticals of cabinetsshall be of double partitions for extra strength. On eitherside of sink, vertical partitions with 19 mm thick marineplywood shall be provided.

Sqm 2.00

2. The shutters of the cabinets shall be made out of 19mm thick BWP plywood with 1 mm thick lamination ofapproved shade and of make Grennlam/ Sunmica/approved make or approved equivalent, factorymachine pressed and with post formed edges. Thebottom portion of the shutter provided at the area of gascylinder shall be with louvers for air circulation. The rateshall include for providing heavy duty hardware fittingssuch as Euro type slip hinges, telescopic channels,brush finish SS handles, slides, hydraulic cabinet stayetc. of high precision and of approved manufacturer viz.Hetich, Haffelle or approved equivalent and alsoincluding the kitchen accessories of stainless steel 304grade of approved manufacturers as specified below.a) Plain baskets of approx. size: 17” X 20" X 6” – 2 Nos.



c) Cup and saucer tray of approx. size: 17” x 20 “ x 4 “-1 No.d) Cutlery tray of approx. size: 17” x 20 “x 4” - 1 No.e) Plate/ thali basket of approx. size: 17” x 20” x 6 “– 1No.f) Garbage basket (grill type): - 1 No.Skirting shall be provided of PVC, 16 mm thick, with theflexibility of retrieving and fixing and also includingrubber lipping as directed. The unit shall be mounted onhigh duty PVC legs adjustable and with clips for fixingskirting [Front visible surface area of the cabinets shallbe measured for payment].

8. Providing, fabricating and fixing in position as per layoutplan overhead cabinets (400 mm deep). Thespecifications for the framework/ carcass and shuttersof the cabinets are same as given for the cabinetsabove [Front visible surface area of the cabinets shallbe measured for payment].

Sqm 2.00

Total of S.H. (II) of Storage

III. DOORS :-

9(a). Solid Flush door: Providing and fixing 30 mm thickflush door with 10 mm thick teakwood lipping on allsides finished in 1 mm thick laminate on both sides ofapproved shade '5003- Phillipene Teak (PST)'/ '9003Bronze Foil (SRL)' of make Greenlam/ 'UGM' FrostyWhite of make Sunmica/ approved make with allnecessary hardware including SS door handle, SSstopper, lock, door closer, SS butt hinges etc. of makeDorma/ Hettich/ Hafele all complete as per directions ofArchitect/ Bank.

Sqm 25.00

9(b). Same as above but finishing with 4 mm thick teakveneer of make Green Decowood/ approved make onone side and with 1 mm thick laminate '5003- PhillipeneTeak (PST)'/ '9003 Bronze Foil (SRL)' of makeGreenlam/ 'UGM' Frosty White of make Sunmica/approved make on other side including making groovesas/ Architect.

Sqm 4.00

10. Solid Flush door with louvres: Providing and fixing 30mm thick flush door with 10 mm thick teakwood lippingon all sides finished in 1 mm thick laminate on bothsides of approved shade '5003- Phillipene Teak (PST)'/'9003 Bronze Foil (SRL)' of make Greenlam/ 'UGM'Frosty White of make Sunmica/ approved make with allnecessary hardware including SS door handle, SSstopper, lock, door closer, SS butt hinges etc. of makeDorma/ Hettich/ Hafele all complete as per directions ofArchitect/ Bank. The item to include teak wood louvresin the shutters of the door. Louvres to be finished withmelamine polish all complete.

Sqm 4.00



Total of S.H. (III) of Doors and Hardware

IV. CEILING AND FINISHING WORKS:-

11. Providing and fixing at all height false ceiling andmaking coves including providing and fixing offramework made of special sections power pressedfrom M.S. sheet and galvanised in accordance with zinccoating of grade 350 as per IS : 277 and consisting ofangle cleats of size 25 mm wide X 1.6 mm thick withflanges of 22 mm and 37 mm at 1200 mm centre tocentre one flange fixed to the ceiling with dash fastener12.5 mm dia X 40 mm long with 6 mm dia bolts to theangle hangers of 25 X 25 X 0.55 mm of required length,and other end of angle hanger being fixed with nut andbolts to G.I. channels 45 x 15 x 0.9 mm running at therate of 1200 mm centre to centre to which the ceilingsection 0.5 mm thick button wedge of 80 mm withtapered flanges of 26 mm each having clips of 10.5 mmat 450 mm centre to centre shall be fixed in a direction

Sqm 475.00

perpendicular to G.I. channel with connecting clipsmade out of 2.64 mm dia x 230 mm long G.I. wire atevery junction including fixing the gypsum board withceiling section and perimeter channels 0.5 mm thick 27mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help ofrawl plugs at 450 mm centre to centre with 25 mm longdrive-all screws @ 230 mm interval including jointingand fixing to a flush finish of tapered and square edgesof the board with recommended filler, jointing tapes,finisher and two coats of primer suitable for board asper manufactures specification and also including thecost of making openings for light fittings, grills, diffusers,cut-outs made with frame of perimeter channels suitablyfixed all complete as per drawing and specification anddirection of the Engineer in Charge but excluding thecost of painting with: 12.5 mm thick tapered edgegypsum board conforming to IS:2095- Part-I of IndiaGypsum/ approved make for both framework and theboard.

Note:- Measurement shall be taken of the plan areaonly. Suspending system and frame work shall matchlayout of Electrical/ fire protection wiring/ fixtures etc.Rate to include provision of extra frame work neededdue to above and to include necessary scaffolding etc.all complete. (Note:- Existing Height of roof is 4 m +.Nothing extra shall be payable in this regards.)



12. Providing and fixing false ceiling base with 12 mm thickcommercial ply over wooden framework of 50 X 50 mmsection all complete as per the directions of Engineer-in-charge/ Architect/ drawings. The ceiling to be finished as follows:

a Using 1 mm laminate of make Merino/ Greenlam/Sunmica/ approved make over base as above andincluding making grooves and finishing the grooves inmelamine polish etc. [Note:- Contractor to use propermasking tapes while polishing grooves etc. to preventany damage to laminate.]

Sqm 75.00

b Providing and fixing wall covering of make ARTE/approved make with adhesive of approved brand andmanufacture all complete as per the directions ofArchitect/ Engineer-in-charge.

Sqm 25.00

13. Providing & fixing in position false ceiling In Armstrongor approved equivalent 600 x 600 mm x 15/16 mmDune Supreme RH 99 Prima tile with Tegular edgeframework as specified by Armstrong Co. withsuspenders wherever required. Item to include makingnecessary framework for AC, if any, and necessarycutouts for diffusers and light fittings, taping andfinishing to proper line & level complete in all respects.(Note:- Existing Height of roof is 4 m +. Nothingextra shall be payable in this regards.)

Sqm 50.00

14. Finishing walls with textured interior paint 'SorrentoGold' of required shade: New work (Two or more coatsapplied @ 3.28 ltr/10 sqm) over and including base coatof water proofing cement paint applied @ 2.20kg/10sqm with rollers/ spray of make ACRO/ approved make.

Sqm 50.00

15. Wall painting with plastic emulsion paint of approvedbrand and manufacture to give an even shade: Two ormore coats on new work with rollers/ spray of makeAsian/ Berger/ Dulux paint.

Sqm 205.00

16. Providing and applying POP punning of 12-15 mmthickness over plastered surface to prepare the surfaceeven and smooth all complete as per the directions ofEngineer-in-charge.

Sqm 255.00

17. Providing and applying one coat of cement primer ofapproved brand and manufacture on wall surface:Cement primer.

Sqm 255.00

18. Providing and fixing polished Bottochino stone wallcladding with cement mortar/ adhesive of approvedbrand and manufacture all complete as per thedirections of Architect/ Engineer-in-charge.

Sqm 16.00



19. Providing and laying granite stone on ledge walls,kitchen, vanity counters, steps and the like including alldesigns/ patterns/ motifs as per architect with 18 mmthick granite (sample of granite shall be approved byArchitect/ Bank) over 20 mm (average) thick base ofcement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with grey cement slurry including rubbing andpolishing all complete with: Granite (Kota Kashta/ OnidaOrange/ Kashmere White).

Sqm 10.00

20. Providing and fixing laquered glass on existingbasework with adhesive etc. as required all complete asper the directions of Architect/ Engineer-in-charge.

Sqm 30.00

Total of S.H. (IV) of Ceiling and Finishing

V. COUNTERS AND TABLES:-

21(a). Providing and fixing in position DGM office table 2100 X1050 mm wide comprising of the following complete inall respects (REFER DRAWING):

Nos. 2.00

i) Work top to be made with 19 mm thick blockboard andfinished with 4 mm thick teak veneer of make GreenDecowood/ approved make. 8 mm thick cleartoughened glass with bevelled edges to be provided ontop. Inside edge of the blockboard shall be provided with10 mm thick teakwood patti finished with melaminepolish.

ii) Vertical facia (apron) shall be made with 19 mm thickblockboard and finished with 4 mm thick teak veneer ofmake Green Decowood/ approved make with groovesas per Architect. The grooves to be finished withmelamine polish all complete. [Note:- Contractor to usemasking tapes etc. to prevent any polishing fromaffecting the laminate.]

iii) Vertical drop box (horizontal box) shall be provided onthe facia with 19 mm thick blockboard finished with 4mm thick teak veneer of make Green Decowood/approved make on all sides all complete as perArchitect.

iv) Vertical supports made with 19 mm thick blockboardfinished with 4 mm thick teak veneer of make GreenDecowood/ approved make as per Architect.

v) Readymade CPU trolley/ fixed laminated base andkeyboard tray shall be provided as per approved modeland make.

vi) Boxing as per drawing made with 12 mm thick plywoodfinished with synthetic enamel paint shall be providedbelow the table top for electrical conduiting and at thebottom for the LAN cabling/ telephone wire conduiting.



vii) The sides/ bottom of the drawer shall be made out of 12mm thick commercial plyboard and finished with 0.8 mmthick laminate on the inside. The outside front facia shallbe finished with 4 mm thick teak veneer of make GreenDecowood/ approved make as per Architect. The itemto include 10 mm thick lipping/ teak patti to all edgesalong with all necessary hardware and fittings in SSfinish including SS wire manager, S.S. handles,magnetic catchers, self closing hinges/ telescopichinges of Hettich/ Hafele/ Ebco etc. [Note:- Contractor touse masking tapes etc. for polishing].

Note:- The direction of grains in veneer shall be as perArchitect. Nothing extra shall be payable in this regard.

21(b). Same as above but AGM office table of size 2100 X900 and finished with 1 mm thick laminate '5003-Phillipene Teak (PST)'/ '9003 Bronze Foil (SRL)' ofmake Greenlam/ 'UGM' Frosty White of make Sunmica/approved make on all exposed surfaces.

Nos. 2.00

22. Providing and fixing in position Chief Manager table1650 X 750 mm wide and finished with 1 mm thicklaminate '5003- Phillipene Teak (PST)'/ '9003 BronzeFoil (SRL)' of make Greenlam/ 'UGM' Frosty White ofmake Sunmica/ approved make comprising of thefollowing complete in all respects (REFER DRAWING):

Nos. 6.00

i) Work top to be made with 19 mm thick blockboard andfinished with 1 mm thick laminate. 8 mm thick cleartoghened glass with bevelled edges to be provided ontop. Inside facia of the blockboard and edges shall befinished with 1 mm thick laminate all complete as perArchitect.

ii) Vertical facia (apron) to be made with 19 mm thickblockboard and finished with 1 mm thick laminate on allexposed facia with grooves as per Architect. Thegrooves to be finished with melamine polish allcomplete. [Note:- Contractor to use masking tapes etc.to prevent any polishing from affecting the laminate.]

iii) Vertical drop box (horizontal box) shall be provided onthe facia with 19 mm thick blockboard finished with 1mm thick laminate on all sides all complete as perArchitect.

iv) Vertical supports made with 19 mm thick blockboardfinished with 1 mm thick laminate on all exposed faciaas per Architect.




vi) Boxing as per drawing made with 12 mm thick plywoodfinished with synthetic enamel paint shall be provided atthe bottom for electrical/ LAN cabling/ telephone wireconduiting.

vii) The sides/ bottom of the drawer shall be made out of 12mm thick commercial plyboard and finished with 0.8 mmthick laminate. All edges shall be finished with PVCedge banding (hot-pressed). The item to include allnecessary hardware and fittings in SS finish includingSS wire manager, S.S. handles, magnetic catchers, selfclosing hinges/ telescopic hinges of Hettich/ Hafele/Ebco etc. [Note:- Contractor to use masking tapes etc.to prevent any polishing from affecting the laminate.]

23(a). Providing and fixing in position Staff Table of size 1500X 750 mm comprising of the following complete in allrespects (REFER DRAWING):

Nos. 4.00

i) Work top to be made with 19 mm thick blockboard andfinished with 0.6 mm thick laminate with postformededge. Inside facia of the blockboard and edges shall befinished with 1 mm thick laminate all complete as perArchitect.

ii) Vertical facia (apron) to be made with 19 mm thickblockboard and finished with 1 mm thick laminate on allexposed facia.






23(b). Same as above but of size 1625 (Average) X 750 Nos. 2.00



23(c). Same as above but of size 1200 X 600 Nos. 2.00

24. Providing and fixing in position Workstation of size1500 X 1500 X 600 mm with an undercounter storage600 X 900 mm and comprising of the following completein all respects (REFER DRAWING):

Nos. 12.00

i) Work top to be made with 19 mm thick blockboard andfinished with 0.6 mm thick laminate with postformededge. Inside facia of the blockboard shall be finishedwith 1 mm thick laminate and all edges shall be finishedwith PVC edge banding (hot-pressed) complete as perArchitect.


iii) Vertical supports to be made with 19 mm thickblockboard finished with 1 mm thick laminate on allexposed facia as per Architect.

iv) Readymade CPU trolley/ fixed laminated base andkeyboard tray shall be provided as per approved modeland make.

v) Boxing as per drawing made with 12 mm thick plywoodfinished with synthetic enamel paint shall be provided atthe bottom for electrical/ LAN cabling/ telephone wireconduiting.

vi) The sides/ bottom of the drawer shall be made out of 12mm thick commercial plyboard and finished with 0.8 mmthick laminate. All edges shall be finished with PVCedge banding (hot-pressed). The item to include allnecessary hardware and fittings in SS finish includingSS wire manager, S.S. handles, magnetic catchers, selfclosing hinges/ telescopic hinges of Hettich/ Hafele/Ebco etc. [Note:- Contractor to use masking tapes etc.to prevent any polishing from affecting the laminate.]

25. Providing and fixing in position Conference Roomtable of size 9000 X 1800 (av.) mm and 750 mm highand comprising of the following complete in all respects(REFER DRAWING):

Nos. 1.00

i) Work top to be made with 19 mm thick blockboard and8 mm thick ply and finished with 4 mm thick teak veneerof make Green Decowood/ approved make in thecentral portion. 300 mm wide edge of the worktop to befinished with 12 mm thick Corian (DUPONT).

ii) Vertical supports to be 38 mm thick and made with 19mm thick blockboard. The same shall be finished with 4mm thick teak veneer of make Green Decowood/approved make.



iii) Understructure of table shall have good wiremanagement capabilities with separate routing forpower and data/ voice cables.

iv) Cables from floor to the table top to be concealed withinthe table leg.

v) Cable dump of depth 250 mm to be provided. Sockets,switches, data and voice points are to be provided at thebottom of the dump.

vi) Minimum 3 Nos. of Cable cubbies shall be provided onthe worktop.Note:- The direction of grains in veneer shall be as perArchitect. Nothing extra shall be payable in this regard.

26. Providing and fixing in position Meeting table of size2600 X 1200 (av.) mm comprising of the followingcomplete in all respects (REFER DRAWING):

Nos. 1.00

i) Work top to be made with 19 mm thick blockboard andfinished with 4 mm thick teak veneer of make GreenDecowood/ approved make.

ii) Vertical supports to be 38 mm thick and made with 19mm thick blockboard. The same shall be finished with 4mm thick teak veneer of make Green Decowood/approved make.

iii) Understructure of table shall have good wiremanagement capabilities with separate routing forpower and data/ voice cables.

iv) Cables from floor to the table top to be concealed withinthe table leg.

v) Cable dump of depth 250 mm to be provided. Sockets,switches, data and voice points are to be provided at thebottom of the dump.

vi) 1 Nos. of Cable cubbies shall be provided on theworktop.Note:- The direction of grains in veneer shall be as perArchitect. Nothing extra shall be payable in this regard.

27. Providing and fixing in position Back Office table 6500 X 600 mm wide (Suitable for 3 Nos. of staff) with 1mm thick laminate '5003- Phillipene Teak (PST)'/ '9003Bronze Foil (SRL)' of make Greenlam/ 'UGM' FrostyWhite of make Sunmica/ approved make comprising ofthe following complete in all respects as per drawingsand directions of Architect/ Bank's Engineer:

Nos. 1.00

i) Work top to be made with 19 mm thick blockboard andfinished with 0.6 mm thick laminate with postformededge. Inside facia of the blockboard and edges shall befinished with 1 mm thick laminate all complete as perArchitect.






v) Readymade CPU trolley/ fixed laminated base andkeyboard tray shall be provided as per approved modeland make (3 Nos.).



28. Providing and fixing in position Reception Desk of size2400 X 750 mm comprising of the following complete inall respects (REFER DRAWING):

Nos. 1.00

i) Work top to be made with 19 mm thick blockboard andfinished with 12 mm thick Corian (DUPONT).

ii) Vertical supports to be made with 19 mm thickblockboard and finished with 12 mm thick Corian(DUPONT).

iii) Vertical facia (apron) to be made with 19 mm thickblockboard and finished with finished with 12 mm thickCorian (DUPONT).

iv) Vertical drop box (horizontal box) shall be provided onthe facia with 19 mm thick blockboard and finished with12 mm thick Corian (DUPONT) all complete as perArchitect.






28(b). Same as above but of upgrading existing reception. Nos. 1.00 Total of S.H. (V) of Counters and Tables

VI. MISCELLANEOUS:-

29. Providing and fixing of teak wood cornice (75 X 35)finished with melamine polish of approved shade as perarchitectural drawing etc. all complete as per direction ofEngineer-in-charge.

Metre 25.00

30. Providing and fixing in position T.W. Architrave allcomplete as per profile given in the detail drawing or asexplained out of wooden sections of sizes given below.All should be finished with melamine polish of approvedshade & colour with minimum 2 coats. This item willoperate only for those mouldings which are to be fixedindependent of any other item as mentioned in the Billof Quantities and not measured under any other itemetc. All complete as per detail drawing, as specified andas directed by Architect/ Engineer-in-Charge.

a 50 X 15 mm Metre 75.00b 15 X 15 mm Metre 200.00c 25 X 10 mm Metre 150.00

31. Providing and fixing notice board with teak woodframing finished with melamine polish and filled with softboard and covered with fabric all complete as per thedirections of Engineer-in-charge.

Sqm 10.00

32. Providing and fixing Stainless steel railing, grab barsand the like conforming to SS-304 in satin matt finish allcomplete. Total welding shall be with Argon gas.Fasteners shall be of Hilti/ Fisher/ Canon make. Item toinclude fixing to wall, floor etc. and making good thesame after cutting, chasing etc. all complete at all floorsand heights [Note:- The weight shall be calculated asper BIS steel table for MS and enhanced by 2.4% toaccomodate for the difference of density].

Kg 125.00



33. Supply & fixing of High Pressure Laminate (HPL) ofExterior grade make Merino/ Greenlam/ Fundermax orapproved make, 6 mm thick in required colours andfixed over aluminium framework of minimum 16 gaugewith rivets etc. Base frame work of aluminium sectionsshall be fixed over finished plaster and the abovealuminium panels shall be fixed to the frame work ascladding including cost of labour, materials, accessories,adhesives, scaffolding, wastages, transportation, taxes,fixing in to a neat finish without any undulations in faciasall complete as per drawings and instruction ofArchitect/ Bank's Engineer.

Sqm 40.00

34. Providing and placing planter of size 450 X 450 madewith 19 mm thick commercial Board and finished with 1mm thick laminate of make Merino complete with allpolish/ paint including the GI trough to take the plant asper the directions of the Architect (Base cost of plant(Raphis Palm) Rs. 4500/- of height 1.5 m+).

Nos. 15.00

35. Providing and fixing in position wooden slats comprisingof 100 mm X 300 mm kail wood section with 6 mm thickplywood on top finished with 1 mm thick laminateMerino 'Metal Steel'/ approved make including groovesas/ Architect. The wood frame work to be applied with 2coats of fire retardent paint and 1 coat of anti-termitewood preservative all complete as per direction ofEngineer-in-charge/ Architect and drawings.

Metre 50.00

Total of S.H. (VI) of Miscellaneous

CIVIL & SANITARY WORKS:-

I. FLOORING WORKS:-

1. Providing and fixing AC-4 grade 10 mm thick laminatedflooring of Armstrong/ Pergo on 2 mm thick foam ofdensity 18 kg/ cum which is inturn laid on 37 micronpolythene sheet. The laminate panel size will be 1200mm X 200 mm random and are fixed with each other bytongue and grove joint or by lock connect joint. Trims,skirting and end profiles of the same shade are to beused to end the flooring in the doors openings and thelike. The colours and the shades will be as per Architect/Bank. The item to include dismantling of existing floorfinish and levelling with cement mortar, sand and thelike all complete as per site requirement. (Note:- Trims, skirtings and end profiles shall not be made bycutting laminate panels in desired sizes and shallhave to be factory made.)

Sqm 160.00



2. Providing and laying Polished Glazed Vitrified floor tiles 'Travertino Beige' of make NITCO/ approved make (600X 600) mm (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622laid on 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) including pointing the joints with whitecement and matching pigment including all designs/pattern and combinations etc. all complete as per thedirections of the Architect/ Engineer-in-charge includinglaying of POP over polythene sheet after the laying ofnew tiles for protection of the tiles from any damage etc.The item to also include dismantling of existing floorfinish and levelling with cement mortar, sand and thelike including disposal of mulba all complete as per siterequirement and laying of POP over polythene sheet forprotection of new vitrified tiles from any damage. (The contractor shall take into account all the wastagesand only area laid shall be measured for payment).

Sqm 525.00

3. Providing and laying wall tiles 'Light Emperador' of makeKajaria/ approved make (600 X 300) mm (thickness tobe specified by the manufacturer) of 1st qualityconforming to IS : 15622 laid on 20 mm thick cementMortar 1:4 (1 cement : 4 coarse sand) including pointingthe joints with white cement and matching pigmentincluding all designs/ pattern and combinations etc. allcomplete as per the directions of the Architect/ Engineer-in-charge. The item to include dismantling of existingwall tile and the like including disposal of mulba andlevelling with cement mortar etc. as per siterequirement. (The contractor shall take into accountall the wastages and only area laid shall bemeasured for payment).

Sqm 150.00

4. Providing and laying floor tiles 'Morrocco Beige' of makeKajaria/ approved make (450 X 450) mm (thickness tobe specified by the manufacturer) of 1st qualityconforming to IS : 15622 laid on 20 mm thick cementMortar 1:4 (1 cement : 4 coarse sand) including pointingthe joints with white cement and matching pigmentincluding all designs/ pattern and combinations etc. allcomplete as per the directions of the Architect/ Engineer-in-charge. The item to include dismantling of existingfloor tile and the like including disposal of mulba andlevelling as per site requirement. (The contractor shalltake into account all the wastages and only arealaid shall be measured for payment).

Sqm 35.00

.



5. Italian marble flooring including all designs/ patterns/combinations/ motifs as per architect with 18 mm thickstone (sample of italian marble shall be approved byEngineer-in-charge) over 20 mm (average) thick base ofcement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with grey cement slurry including rubbing andpolishing the same.

Sqm 40.00

Total of S.H. (I) of Flooring

II. CIVIL WORKS:-6. Brick work with F.P.S. bricks of class designation 75 in

superstructure above plinth level up to floor III level in allshapes and sizes in: Cement mortar 1 : 6 (1 cement : 6coarse sand).

Cum 6.00

7. Half brick masonry with F.P.S. bricks of classdesignation 75 in superstructure above plinth level up tofloor III level. Cement mortar 1:3 (1 cement : 3 coarsesand). Item to include providing and placing in position 2Nos. 6 mm dia. M.S. bars at every third course of halfbrick masonry (with F.P.S. bricks).

Sqm 7.00

8. 12 mm cement plaster on brick wall of mix: 1 : 6 (1cement: 6 coarse sand).

Sqm 75.00

9. Dismantling and removal of damaged/ unrequiredflooring, panelling, partitions, furniture, sanitary fixtures,brickwork, water proofing and the like in tile/ marble/wood/ granite etc. as required and disposal of the mulbaoutside municipal limits all complete as per thedirections of the Engineer-in-charge. [Note:- The itemshall be for the entire area of the branch/ adjoiningareas in the premises where work is being done.]

Nos. 1.00

Note: The item to include Co-ordiantion andliasioning with NDMC all complete.

Total of S.H. (II) of Civil Works

III. SANITARY INSTALLATIONS:-

10. Providing & fixing white vitreous china wall hung typeWater Closet Enigma (Cat No. 92024) of makeHindware with concealed flushing cistern Concealo 83mm (Cat. No. 506743) suitable for 3/6 litres flush withflushing plate in chrome finish of make Hindware withC.P bolts, nuts, C.I bracket or other hangingarrangements with composite seat and lid with SShinges and including cutting and making good the wallsand floors wherever required.

2.000 Each



11. Providing and fixing white vitreous china over countertype wash basin Monalisa (Cat. No. 10069) of makehindware, 15 mm C.P. brass pillar tap with 200 mmextended body of make Jaquar and 32 mm C.P. brasswaste without pop up system of make Jaquar orapproved equivalent including painting of fittings andbrackets, cutting and making good the walls whererequired.

2.000 Each

12. Providing and fixing white vitreous china 'Senso Urinal'with flushing plate in chrome finish of make Hindwarewith C.P bolts, nuts, C.I bracket or other hangingarrangements and including cutting and making goodthe walls and floors wherever required.

6.000 Each

13. Providing and fixing CP brass bottle trap 32 mm sizewith 300 mm long wall connection pipe for Wash basinand sink (Cat. No. ALD-769B) and connection pipe towall with C.P. wall flange and rubber adapter for wasteconnection of make Jaquar or approved equivalent.

8.000 Each

14. Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved quality of makeJaquar or approved equivalent: 15 mm nominal bore.

11.000 Each

15. Providing and fixing Health faucet with 8 mm dia, 1meter long Flexible tube with wall hook (Cat. No. ALD-573) of make Jaquar or approved equivalent with SSscrews etc. all complete as per directions of Engineer-in-charge.

2.000 Each

16. Providing and Fixing C.P. brass central Hole, sink mixerwith swinging casted spout complete including cuttingand making good the walls wherever required of makeJaquar or approved equivalent.

1.000 Each

17. Providing and Fixing SS sink with single bowl and drainboard including cutting and making good the walls,counters wherever required of make Nirali or approvedequivalent.

1.000 Each

18. Providing and fixing C.P. brass robe hook (Cat. No.AQN-7791) of Jaquar/ approved make with SS screwsetc. all complete as per directions of Engineer-in-charge.

Each 2.00

19. Providing and fixing toilet paper holder recessed type(Cat. No. AHS-1551) of Jaquar/ approved make with SSscrews etc. all complete as per directions of Architect/Engineer-in-charge.

Each 2.00



20. Providing and fixing Hand dryer (Cat No. EH-07S) ofEuronics/ approved make in SS finish all complete asper the directions of the Architect/ Engineer-in-charge.

Nos. 1.00

21. Providing and fixing Paper dispensers (Cat No. 09992)of Kimberley Clarke/ approved make in white colour allcomplete as per the directions of the Architect/ Engineer-in-charge.

Nos. 1.00

22. Providing and fixing liquid soap dispensers (Cat No. ES-09) of Euronics/ approved make all complete as per thedirections of the Architect/ Engineer-in-charge.

Nos. 2.00

23. Providing and fixing Mirror with frosted border of size1500 x 600 fixed on 6 mm ply backing and mountedwith SS spacers etc. all complete as per the directionsof Architect/ Engineer-in-charge.

Sqm 1.00

24. Providing and fixing centrifugally cast (spun) iron soil,waste and vent pipes as per IS:3989 including allfittings with or without access of any degree i.e bends,junctions, cowls, offsets, access pieces, M.S holder batsand clamps, stays, etc and jointing with refined pig leadjoints including cutting holes in walls and floors andexcavation, refilling and disposal of surplus earthwherever required and making good the samecomplete, as directed by the Engineer-in-charge true toalignment and gradient: 100 mm dia. Item to includepainting and priming coat of the above.

Mtr 90.00

25. Providing & fixing G.I. pipe to IS:1239 (medium class)complete with G.I. fittings, clamps and hinges includingcutting and making good the walls and ceiling for wastepipes, bath wastes, overflow, kitchen equipment wasteconnections and condensate drainage, as directed bythe engineer-in-charge including painting of G.I. pipeswith two coats of bitumastic paint wrapping polythenetape & applying the final coat of bitumastic paint.

(a) 25 mm nominal bore Mtr 75.00(b) 15 mm nominal bore Mtr 90.00

26. Providing & fixing sand cast iron deep seal P or S trapof self cleansing design with or without vent arm withprovision for connecting G.I. inlet fitting completeincluding cost of cutting and making good the walls andfloors wherever required.

Each 6.00

27. Providing and fixing G.I floor drain consisting of G.Ielbow (grating and G.I pipe to be paid separately),complete as per instructions.100 x 50 mm G.I. Elbow Each 6.00



28. Providing & fixing G.I. inlet fitting with one or more inletsfabricated from 100 mm dia G.I. pipe and welded G.I.sockets and fixed to C.I. trap and set in cementconcrete as per drawing complete.

Each 6.00

29. Providing and fixing 138 mm outer dia Stainless Steel,life style round Trap embeded in Floor (Chilly makeCCTL R-138 or Equivalent).

Each 6.00

30. Providing and fixing G.I. Union in G.I. Pipe includingcutting and threading the pipe and making long screwsetc. complete (new work) : 15 mm nominal bore.

Each 30.00

31. Providing and fixing G.I. Union in G.I. Pipe includingcutting and threading the pipe and making long screwsetc. complete (new work) : 25 mm nominal bore.

Each 30.00

32. Providing, laying and jointing glazed stoneware pipesconforming to IS: 651 grade ‘A‘ with stiff mixture ofcement mortar in the proportion of 1:1 (1 cement: 1coarse sand) including testing of joints etc. completetrue to requisite alignment and gradient.

(a) 100 mm dia Mtr 47.00(b) 150 mm dia Mtr 47.00

33. Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mmnominal size) alround S.W / RCC / C.I LA. pipesincluding bed and alround concrete 15cms thick as perstandard design.

(a) 100 mm dia Mtr 47.00(b) 150 mm dia Mtr 47.00

34. Providing and fixing square mouth 'P' type S.W gullytrap grade ‘A‘ of size 150x100mm complete with C.I.grating, brick masonry chamber and water tight C.I.cover and frame of 300x300mm size (inside) withweight of cover to be not less than 4.50 Kg and frameto be not less than 2.70 Kg as per standard design.

Each 6.00

35. Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end): 25 mmnominal bore.

Each 2.00



36. Constructing brick masonry manhole with 75 classdesignation bricks in cement mortar 1:4 (1 cement : 4coarse sand), RCC top slab with 1:2:4 mix (1 cement : 2coarse sand: 4 graded stone aggregate 20mm nominalsize), 200mm thick foundation concrete 1:4:8 mix (1cement : 4 coarse sand; 8 graded stone aggregate40mm nominal size), inside and outside plastering12mm thick with cement mortar 1:3 (1 cement:3coarse sand), finished with a floating coat of neatcement inside and rough plaster on outside and makingchannels in cement concrete 1:2:4 mix (1 cement : 2coarse sand: 4 graded stone aggregate 20mm nominalsize), neatly finished complete as per standard designincluding excavation, refilling and disposal of surplusearth. Inside size 90x80cms and 60cms deep includingSFRC cover 455x610mm internal dimensions totalweight of cover and frame to be not less than 38 kg (wt.of cover 23 kg and wt. of frame 15 kg).

Each 2.00

37. Extra for item no. 12.19 for additional depth of manholes of size 90 X 80 cms beyond 60 cms depth.

Mtr. 2.00

Total of S.H. III of Sanitary Fixtures


Name of Work: Interior and Furnishing Works at Ground ... BOQ.pdf · member for door frame and additional framework and ... members to be fixed to RCC ceiling but the area of ...

Documents