-
1/9
Name of Faculty : Dr. S. H. Gawande
Designation : Associate Professor and In-charge PG Courses
Educational
Qualification :
PhD [Mechanical Engg.] [12th September-2012], COE, Pune,
University of Pune M.E. [Mechanical-Design Engg.] [December-2002],
VIT, Pune, University of Pune B.E. [Mechanical Engg.][ [May-2001],
AEC,Chikhali, Dist. Buldana, Amravati University
Date of Joining : 23/02/2004
Experience : Teaching: 16 years Industry: 1.3 years
Area of
Specialization :
Design Engineering, Vibration Controls in Reciprocating
Machines, Tribology.
Membership : ISTE India, SAE India, IACSIT Singapore, ACSE
Dubai.
PhD Thesis Submitted:
Ph.D. Guidance :
1. Mr. Nitin D. Pagar, Mechanical & Materials Technology,
Savitribai Phule Pune University, Department of Technology.
2. Mrs. Smita Veer, Mechanical Engineering, Savitribai Phule
Pune University, Faculty of Enginnering.
PhD Going on:
3. Mr. Dhansingh K. Kokare, Mechanical Engineering, Savitribai
Phule Pune University, Faculty of Enginnering.
4. Mr. Nitin D. Gadhave, Mechanical Engineering, Savitribai
Phule Pune University, Faculty of Enginnering.
5. Mr. Sunil D. Wankhede, Mechanical Engineering, Savitribai
Phule Pune University, Faculty of Engineering.
6. Mr. Nishikant B. Patil, Mechanical Engineering, Savitribai
Phule Pune University, Faculty of Engineering.
7. Mr. Vipin Palhade, Mechanical Engineering, Savitribai Phule
Pune University, Faculty of Engineering.
Awards and
Achievements :
1. Successfully organized 1st International Conference on
Mechanical, Electronic Systems and Computer Engineering
(ICMESCoE-2017) during 29-30th June-2017. All accepted papers are
published in SCOPUS indexed Journals of Praise Worthy Prize (IREME,
IRECAP, IREACO) [Quality Q1 & Q2].
2. Recognized PhD Guide & Post Graduate Teacher in
Mechanical Engineering & Technology of S.P. Pune
University.
3. Editor-in-Chief for Journal of Mechanical Design &
Vibration
[JMDV] USA.
http://www.sciepub.com/journal/JMDV/EditorialBoard
4. Member, Asian Council of Science Editors, Dubai.
http://theacse.com/newmembers.php?pageNum_Recordset1=20&totalRows_Recordset1=351
5. Working as Scientific Program Committee member for
International Symposium on Engineering and Technology
http://www.sciepub.com/journal/JMDV/EditorialBoard
-
2/9
(ISET-2014, 2015) & International Conference on Design,
Manufacturing and Mechatronics, at KJ's Educational
Institutes, Pune, India.
6. Received Best Paper Award on PhD Work by IACSIT
Singapore in 2010 during IEEE Conference at Singapore.
7. Working as International Scientific Committee member &
Reviewer for 2014 International Conference on Smart City
[ICSC2014], Shanghai, China, December 25-26, 2014.
8. Worked as Reviewer for ICAAE-2010 Singapore, ICMET-2012,
Dalian, China.
9. Worked as Program Committee Member at International
Conference on Mechanical & Electrical Technology [ICMET2011],
August 25-27, 2011, at Dalian, China.
10. Working as Editorial Board Member for Recent Patents in
Mechanical Engineering, Publisher-Bentham Science, USA.
Invited Talk :
1. Delivered as Key Note Speaker during 3rd National Level
Conference “”NCRDMECE-2018 on 23rd February 2018 at GHRCEM Wagholi
Pune.
2. Delivered invited expert lecture “Design for Fluctuating
Loads” of Machine Design-I subject” at G. H. Riasoni College of
Engineering, Jalgaon, on 21/07/2016.
3. Delivered invited expert lecture on “Basics and Applications
of Machine Design” at Rajghad Technical Campus, Shree Chattrapati
Shivajiraje College of Engineering, Pune on 21/07/2016.
4. Delivered invited expert lecture during “One Day Quality
Improvement Program On Recent Trends in Finite Element Analysis” on
Saturday, 13th Feb. 2016 Organized under QIP Program of Savitribai
Phule Pune University by P.E.S. Modern College of Engineering,
Shivajinagar, Pune, Maharashtra, Pin- 411005.
5. Delivered invited guest lecture on “Significance of Research
and Sources of Funding” at Dr.D.Y.Patil Institute of Engineering
& Technology, Ambi-Talegaon Dabhade, Pune on 16 January
2016.
6. Delivered guest lecture on “Sources of Funding for Research
in World” at Navsahyadri Education Societys College of Engineering,
Pune on 09th December 2015.
7. Delivered Invited key note on “Vibration Control in Planetary
Gear Train by Phasing Method” I at National Conference on “Recent
Trends in Mechanical Engineering (RTME 2015)” on 21st March 2015
organized by. V. P. institute of Engineering & Technology,
Soalpur.
8. Delivered expert lecture on “Recent Trends in research &
development Opportunities in Mechanical Engineering, at Sahakar
Maharashi Shankarrao Mohite-Patil Institute of Technology &
Research, Akluj, Solapur on 30/07/2013.
-
3/9
9. Delivered expert lecture on “Research Methodology”, at
YASHADA Pune on 01st September 2013 and 01st October 2013.
Reviewer
:
1. Energy, Publisher-Elsevier. Impact Factor-5.582 as per 2017
Journal Citation Report 2018, Thomson Reuters. Indexing-SCIE
2. Iranian Journal of Science and Technology, Transactions of
Mechanical Engineering, Springer International Publishing, . Impact
Factor-0.732 as per 2017 Journal Citation Report
2018Indexing-WoS/SCIE, Scopus
3. Thin Walled Structures, Publisher-Elsevier. Impact
Factor-3.037 as per 2017 Journal Citation Report 2018, Thomson
Reuters. Indexing-WoS/SCIE, Scopus
4. International Journal of Dynamics and Control (IJDY),
Springer International Publishing, Indexing-Scopus
5. IEEE Transactions on Industrial Informatic, Impact
Factor-4.708, as per 2015, Journal Citation Report, Thomson
Reuters. Indexing-WoS/SCIE, Scopus
6. Applied Acoustics, Publisher-Elsevier. Impact Factor-1.921
per 2016, Journal Citation Report, Thomson Reuters.
Indexing-SCIE
7. Journal of Mechanical Science and Technology, Impact
Factor-0.838, as per 2014, Journal Citation Report, Thomson
Reuters. Springer International Publishing, Indexing-SCIE
8. Journal of Vibration and Control Publisher-Sage Publications.
Impact Factor-4.355 as per 2013 Journal Citation Report, Thomson
Reuters. Indexing-SCIE
9. Control Engineering Practice, Publisher-Elsevier. Impact
Factor-2.213 as per 2015 Journal Citation Report, Thomson Reuters.
Indexing-SCIE
10. Journal of Hydraulic Engineering, Publisher-American Soc.
Civil Engineering, Impact Factor-1.284 as per 2016 Journal Citation
Report, Thomson Reuters. Indexing-SCIE/Scopus
11. Recent Patents in Mechanical Engineering (Intl. Journal),
Publisher-Bentham Science, USA. Indexing-SCIE/Scopus
Publications in
National &
International
Journals and
Conferences
:
1. In Trans. & Journals indexed in WoS/SCIE/ESCI :20 2. In
Trans. , Journals & Proc. Indexed in CPCI, EI, Scopus. :48 3.
In Journals Indexed in Crossref & Google Scholar : 83 4. In
International Conferences (IEEE/ASME): 04 5. In National
Conferences : 16
For more information:
https://www.researchgate.net/profile/Shravan_Gawande
https://www.scopus.com/authid/detail.uri?authorId=55387539400
http://scholar.google.co.in/citations?user=63TOnb4AAAAJ&hl=en
http://scholar.google.co.in/citations?user=63TOnb4AAAAJ&hl=en
-
4/9
List of Publications by Dr.S.H.Gawande
Sr. No. Title of the Paper Name of the journal & Publisher
Status/Mo
nth of Publication
As a Main Author:
1. Critical Hydraulic Eccentricity Estimation in Vertical
Turbine Pump Impeller to Control Vibration
Paper ID-TMAR-2020-0063, Journal of Marine Engineering &
Technology, Print ISSN: 2046-4177 Online ISSN: 2056-8487,
Publisher: Taylor and Francis, Indexing-SCIE/Web of
Science/Scopus
Under Review
2. Heat Transfer Augmentation in a Circular Tube Fitted with
Tri- Partition Flow Splitters
Paper ID- TAEN-2020-0511, International Journal of Ambient
Energy, Print ISSN: 0143-0750 Online ISSN: 2162-8246 Publisher:
Taylor and Francis, Indexing-SCIE/Web of Science/Scopus
Under Review
3. Effect of process parameters on Coefficient of Friction in
Tube Hydroforming
Paper ID- JBTC-D-20-00136, Journal of Bio- and Tribo-Corrosion,
ISSN(Print)- 2198-4220, ISSN(e): 2198-4239, Paper ID-
JBTC-S-18-00079, Publisher Springer International Publishing,
Indexing-SCOPUS.
Under Review
4. Reducing instabilities of mesh stiffness variation in
two-stage gear using phasing method
JMST Advances, Print ISSN: 2524-7905, Online ISSN: 2524-7913,
Vol.2, No.3, 2020. Publisher Springer International Publishing,
Indexing-SCOPUS.
Sept. 2020
5. Study on Tribological Investigations of Alternative
Automotive Brake Pad Materials
Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220,
ISSN(e): 2198-4239, Vol.6, No.3, 2020, Publisher Springer
International Publishing, Indexing-SCOPUS.
July 2020
6. Bio-Lubricants for Hydrodynamic Bearings
Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220,
ISSN(e): 2198-4239, Vol.6, No.3, 2020, Publisher Springer
International Publishing, Indexing-SCOPUS.
June 2020
7. Study on Influence of Friction on Process Parameters in Tube
Hydroforming
Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220,
ISSN(e): 2198-4239, Vol.6, No.3, 2020, Publisher Springer
International Publishing, Indexing-SCOPUS.
June 2020
8. Influence of Lubricants on Coefficient of friction in Tube
Hydroforming
Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220,
ISSN(e): 2198-4239, Vol.6, No1, 2020, Publisher Springer
International Publishing, Indexing-SCOPUS.
Jan.2020
9. Performance evaluation of EN24 for planetary gear
transmission of CNC bending machine
Journal of the Brazilian Society of Mechanical Sciences and
Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol.42,
No. 6, 2020, Publisher: Springer International Publishing,
Indexing-SCIE/Web of Science/Scopus
May 2020
-
5/9
10. Parametric design analysis of meridional deflection stresses
in metal expansion bellows using gray relational grade
Journal of the Brazilian Society of Mechanical Sciences and
Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol. 42,
No. 4, May 2020. Publisher: Springer International Publishing,
Indexing-SCIE/Web of Science/Scopus
April 2020
11. Multi-response design optimisation of convolution stresses
of metal bellows using integrated PCA-GRA approach
Australian Journal of Mechanical Engineering,
Print ISSN: 1448-4846 Online ISSN: 2204-2253,
In press, Publisher: Taylor and Francis, Indexing-
ESCI/Web of Science/Scopus
https://doi.org/10.1080/14484846.2020.1725347
Feb. 2020
12. Dynamic Analysis of End Conditions for Shell Side Pipings of
STHE
Paper No: GTINDIA2019-2775, V001T05A021; 14
pages, ASME 2019 Gas Turbine India Conference,
Dec. 5–6, 2019, Chennai, Tamil Nadu, India.
ISBN: 978-0-7918-8352-5, Indexing: WoS (CPCI),
Scopus etc.
https://doi.org/10.1115/GTINDIA2019-2775
Dec.2019
13. Experimental Investigations on Meridional and
Circumferential Stresses of Bellows due to Internal Pressure
Paper No: GTINDIA2019-2771, Proc. ASME.
GTINDIA2019, Vol.1: Compressors, Fans, and
Pumps; Turbines; Heat Transfer; Structures and
Dynamics, V001T05A020, Dec. 5–6, 2019.
Indexing: WoS (CPCI), Scopus etc.
DOI: https://doi.org/10.1115/GTINDIA2019-2771
Dec.2019
14. Assortment of Hydroforming fluid for Extreme Pressure and
Anti Wear Properties
Proc. ASME. IMECE2019, Vol. 12: Advanced
Materials: Design, Processing, Characterization, and
Applications, (IMECE2019), Nov.11-14, 2019, Salt
Lake City, Utah, USA
Indexing: WoS (CPCI), Scopus etc.
https://doi.org/10.1115/IMECE2019-10163
Nov. 2019
15. Design Optimization of Toggle Clamping Mechanism
Iranian Journal of Science and Technology, Transactions of
Mechanical Engineering, ISSN (Print): 2228-6187, ISSN(e):
2364-1835, Vol. 43, No.4, 2019, Publisher: Springer International
Publishing, Indexing-SCIE/Web of Science/Scopus
https://link.springer.com/article/10.1007/s40997-018-0237-y
December 2019
16. Recreation of service loads using strain gauges of speed
shifting lever
Journal of the Brazilian Society of Mechanical Sciences and
Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol. 41,
No. 10, Oct. 2019. Publisher: Springer International Publishing,
Indexing-SCIE/Web of Science/Scopus
Oct. 2019
17. Study on the effect of gasket thickness for bolted gearbox
flange joint
SN Applied Sciences Vol. 1, No.9, Online ISSN:2523-
3971, Publisher Springer International Publishing,
Indexing- ESCI (WoS), SCOPUS.
Sept. 2019
18. Some Investigations on Effect of Notch on Dynamics
Characteristics of Cantilever Beams
International Journal Acoustic & vibrations [IJAV], ISSN
(Print/online): 1027-5851, Publisher: International Institute of
Acoustics and Vibration (IIAV), Vol. 24, No.1, pp. 20-27 March
2019, Indexing- SCIE/Web of Science and Scopus.
March 2019
https://doi.org/10.1115/GTINDIA2019-2775https://doi.org/10.1115/IMECE2019-10163https://link.springer.com/journal/42452
-
6/9
19. A Combined Numerical and Experimental Investigation on the
Effect of Dynamics Characteristics of Metal Expansion Bellows
Journal of Vibration Engineering & Technologies
Vol. 6, No.5, pp.401–416, 2018
Publisher: Springer International Publishing,
Indexing-SCIE/Web of Science/Scopus
Oct. 2018
20. Experimental Study on Tribological characteri-stics of Steel
Alloys for CNC Bending Machine
Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220,
ISSN(e): 2198-4239, Vol.4, No. 4, 2020Paper ID- JBTC-S-18-00079,
Publisher Springer International Publishing, Indexing-SCOPUS.
2018
21. Optimisation of Torsional Stiffness of Heavy Commercial
Vehicle Chassis Frame"
Automotive Innovation, AUIN-D-18-00017, ISSN (Print): 2096-4250,
ISSN(e): 2522-8765), Vol.1, No. 4, pp. 352-361, Nov. 2018
Publisher: Springer International Publishing, Singapore.
Indexing-SCOPUS.
Nov. 2018
22. Numerical and Experimental Investigations on Metal Expansion
Bellows for STHE
Journal of the Brazilian Society of Mechanical Sciences and
Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol. 40,
No.9, 2018 Publisher: Springer International Publishing,
Indexing-SCIE/Web of Science/Scopus
Sept.2018
23. Tribological Behaviors of Steel and Al Alloys for
Hydroforming Components
Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220,
ISSN(e): 2198-4239, Publisher Springer International Publishing,
Vol.4, No.3, 2018 Indexing-SCOPUS.
2018
24. Optimizing performance of the Jatropha biodiesel engine
using Taguchi approach
Journal of the Brazilian Society of Mechanical Sciences and
Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol.40,
No.4, pp.1-13, Publisher-Springer Berlin Heidelberg,
Indexing-SCIE/Web of Science/Scopus
April 2018
25. Dynamic analysis of Compressor Mounting Bracket in
Automobiles
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.12, No.1 pp. 55-59, 2018.
Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS (Q2)
January 2018
26. Numerical and Experimental Analysis of Compressor Mounting
Bracket in Automobiles
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.12, No.1 pp. 55-59, 2018.
Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS (Q2)
January 2018
27. Performance Evaluation of Mechanical Power Amplifier for
Various Belt Materials
The Open Mechanical Engineering Journal, ISSN(e): 1874-155X,
Vol.12, pp. 95-107, Publisher-Bentham Science Open, Sharjah, U.A.E,
https://www.benthamopen.com/TOMEJ/VOLUME/12/ Indexing-Scopus
2018
28. Optimization of Process Parameters to Study the Influence of
the Friction in Tube Hydroforming
Journal of Bio- and Tribo-Corrosion, Vol.3, No. 4, pp. 1-7,
ISSN(Print)- 2198-4220, ISSN(e): 2198-4239,
, , Indexing-SCOPUS.
December 2017
29. Experimental Investigations of Vibration Reduction in Spur
Gear Pair by Method
Journal of Vibration Engineering & Technologies, ISSN
(Print/online): 2321-3558, Publisher- Krishtel eMaging Solutions
Pvt. Ltd, India, Vol.5, no.6, pp. 569 – 581, 2017, Indexing-SCIE/
Web of
December 2017
-
7/9
of Phasing Science and SCOPUS.
30. Optimization of Design Parameters of Bellows Using Taguchi
Method
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.7 pp. 743-747,
2017. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
October 2017
31. Design and Analysis of Performance Oriented Road Legal
Muffler
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.7 pp. 748-757,
2017. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
October 2017
32. Topology Optimization and Stress Validation of the Hand
Brake Lever
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.7 pp. 442-447,
2017. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
July 2017
33. Numerical and Experimental Investigation of Structural
Gasketing Approach for Gearbox Flange
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.7 pp. 520-529, 2017
. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
July 2017
34. Optimization of CI engine vibration characteristics operated
on jatropha methyl ester using taguchi and multiple regression
analysis.
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.6 pp. 367-372, 2017
. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
June 2017
35. Experimental study on the effect of water injection in an
internal combustion engine.
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.6 pp. 379-386,
2017. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
June 2017
36. Performance Estimation of Charge Air Cooler for Passenger
Car
International Review of Mechanical Engineering (IREME), ISSN
(p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.6 pp. 414-418,
2017. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS
June 2017
37. A Combined Numerical and Experimental Investigation on the
Effect of Dynamics Characteristics of Metal Expansion Bellows
Journal of Vibration Engineering & Technologies, ISSN
(Print/online): 2321-3558, Vol.6, No.6, 2018 Publisher- Krishtel
eMaging Solutions Pvt. Ltd, Manuscript No. JVET/CW/718, India,
Indexing-SCIE/ Web of Science, SCOPUS,
Dec. 2018
38. Effect of Notch Depth & Location on Modal Natural
Frequency of Cantilevers Beams
Structure (Int. Journal), ISSN (Print): 2352-0124, Vol.8, Part1
pp.121–129, Publisher-Elsevier,
Indexing-SCIE/Web-of-Science/Scopus.
http://dx.doi.org/10.1016/j.istruc.2016.09.003
Nov. 2016
39. Some Investigations on Effect of Notch on Dynamics
Characteristics of Cantilever Beams
International Journal Acoustic & vibrations [IJAV], ISSN
(Print/online): 1027-5851, Publisher: International Institute of
Acoustics and Vibration (IIAV), Vol. 22, No.4, pp. 493500, December
2017, Indexing- SCIE/Web of Science and Scopus.
Dec. 2017
40. Experimental Investigation of Transverse Machine Tool
Vibration Using Passive Damping
Journal of Vibration Analysis, Measurement, and Control, ISSN:
2162-9854 (Online), Vol. 4, No. 2, pp. 69-84, 2016. Publisher-
Columbia International Publishing (CIP). DOI:
10.7726/jvamc.2016.1006
July 2016
-
8/9
41. Design Optimization of Precision Casting for Residual Stress
Reduction
Journal of Computational Design and Engineering, ISSN (Print):
2288-4300, Vol.3, No. 2, pp. 140–150, 2016, Publisher-Elsevier,
Indexing-SCIE/Web-of-Science, DOI:10.1016/j.jcde.2015.10.003
Nov. 2016
42. Tribological Behaviour of High Fraction Carbon Steel
Alloys
Journal of Bio- and Tribo-Corrosion, ISSN (Print)-2198-4220,
ISSN (Online)-2198-4239, Vol.2, No.1, pp.1-9, 2016 Publisher:
Springer International Publishing, Indexing-Scopus DOI:
10.1007/s40735-016-0034-3
January 2016
43. Effect of Impacting Particle Kinetic Energy on Slurry
Erosion Wear
Journal of Bio- and Tribo-Corrosion, ISSN (Print)-2198-4220,
ISSN (Online)-2198-4239, Vol.1, No.4, pp.1-9, 2015, Publisher:
Springer International Publishing, Indexing-Scopus, DOI:
10.1007/s40735-015-0028-6
October 2015
44. Dynamic Modeling of PGT using Analytical & Numerical
Approach
Journal of Mechanical Design and Vibration (JMDV), ISSN (Print):
2376-9564, ISSN (Online): 2376-9572, Vol. 3, No. 1, 2015, 24-30,
Publisher: Science and Education Publishing, USA,
http://pubs.sciepub.com/jmdv/3/1/3/ DOI: oi:
10.12691/jmdv-3-1-3
2015
45. Performance Evaluation of Globe Valve as Control Valve using
CFD Software
Pumps Valves and Systems, Publisher-Kirloskar Brothers Ltd, ISSN
(Print):2347-808X, Vol. 6, No. 6, 26-38, 2015
July-August 2015
46. Numerical Investigations on Characteristics of Stresses in U
Shaped Metal Expansion Bellows
International Journal of Metals, Publisher: Hindawi Publication
Corp. USA. ISSN(Print) 2314-680X, Vol. 2015, Paper no.- 957925.
Submitted on 05/05/2015. http://dx.doi.org/10.1155/2015/957925 This
work was supported by Alfa Laval India Ltd, Pune.
2015
47. Experimental Investigations of Noise Control in Planetary
Gear Set by Phasing
Journal of Engineering, ISSN (Print): 2314-4904, ISSN (Online):
2314-4912, Vol.2014, Publisher: Hindawi Publication Corp. USA.
Indexing-ESCI/Web of Science/Scopus
http://dx.doi.org/10.1155/3962/857462
Nov. 2014
48. Noise Level Reduction in Planetary Gear Set
Journal of Mechanical Design and Vibration (JMDV), ISSN (Print):
2376-9564, ISSN (Online): 2376-9572, Vol. 2, No. 3, 2014, 60-62,
Publisher: Science and Education Publishing, USA,
http://pubs.sciepub.com/jmdv/2/3/1 DOI:10.12691/jmdv-2-3-1
July 2014
49. Investigations of Dynamic Characteristics of Eccentric
Rotary Shaft of Wankel engine
Journal of Mechanical Design and Vibration, (JMDV), ISSN
(Print): 2376-9564, ISSN (Online): 2376-9572, Vol. 2, No. 2, 2014,
53-59, Publisher: Science and Education Publishing, USA,
http://pubs.sciepub.com/jmdv/2/2/3 DOI:10.12691/jmdv-2-3-3
June 2014
http://link.springer.com/journal/40735http://link.springer.com/journal/40735
-
9/9
50. 2.
Design, Manufacturing & Analysis of Differential Crown Gear
and Pinion for MFWD Axle
Special Issue of Journal of Mechanical & Civil Engineering,
ISSN (e): 2278-1684, ISSN (p): 2320–334X, Vol.2, Page No.59-66,
Publisher: International Organization of Scientific Research,
Ghaziabad.www.iosrjournals.org. This work was supported by Carraro
India Ltd, Pune.
April 2013
51. 3.
Die Casting Defect Analysis & Experimental Validation for
Compressor Housing
Special Issue of Journal of Mechanical & Civil Engineering,
ISSN (e): 2278-1684, ISSN (p): 2320–334X, Vol.1, Page No.55-61,
Publisher: International Organization of Scientific Research,
Ghaziabad.www.iosrjournals.org. This work was supported by Minda
Spark India Ltd, Pune.
April 2013
52. Analysis STHE to Identify Low Stress Area for Locating
Nozzle Openings
Special Issue of Journal of Mechanical & Civil Engineering,
ISSN(e): 2278-1684, ISSN(p): 2320–334X, Vol.2, Page No.44-49,
Publisher: International Organization of Scientific Research,
Ghaziabad.www.iosrjournals.org. This work was funded by Alfa Laval
India Ltd, Pune.
April 2013
53. 5 Design and Development of Shell & Tube Heat Exchanger
for Beverage
Modern Mechanical Engineering (MME), ISSN (Print): 2164-0165,
ISSN (Online): 2164-0181, Vol.2, no.6, Page No. 121-125, November,
2012, Publisher- Scientific Research, California, USA. This work
was funded by Alfa Laval India Ltd, Pune,
DOI:10.4236/mme.2012.24015
November, 2012
54. 6.
Power Balancing of Inline Multi-cylinder Diesel Engine
Advances in Mechanical Engineering, ISSN (Print): 1687-8132,
ISSN (Online): 1687-8140, Vol.2012, Publisher: SAGE Publication
Corp. USA, Paper ID-937917, DOI:10.1155/2012/937917, Indexing-
SCIE/Web of Science, SCOPUS, Impact Factor : 0.848, JCR 2017,
Thomson Reuter-2018. This work was supported by Greaves Cotton Ltd,
Pune & KOEL Pune.
October 2012
55. 7.
Fault Detection of Inline Reciprocating Diesel Engine- A Mass
& Gas Torque Approach
Advances in Acoustic and Vibration, ISSN (Print): 1687-6261,
ISSN (Online): 1687-627X, Vol.2012, Publisher: Hindawi Publication
Corp. USA. Paper no.- 314706 DOI:10.1155/2012/314706, Indexing-
ESCI/Web of Science, Scopus.
July 2012
56. 8.
Identification and Analysis of Engine Speed and Noise in In-line
Diesel Engine
Jordan Journal of Mechanical and Industrial Engineering (JJMIE),
Hashemite University, ISSN (Print): 1995-6665, Feb. 2012, Vol.6,
No.1, Page No.71 – 74, Publisher-Hashemite University, Jordan
Republic. Indexing- ESCI/Web of Science, Scopus.
February 2012
57. 9.
Design Optimization of Shell and Tube Heat Exchanger by
Vibration Analysis,
Modern Mechanical Engineering (MME), ISSN (Print): 2164-0165,
ISSN (Online): 2164-0181, Vol.1, no.1, Page No. 6-11, August 2011,
Publisher- Scientific Research, California, USA. This work was
funded by Alfa Laval India Ltd, Pune,
DOI:10.4236/mme.2011.11002
August 2011
58. 10.
Dynamic Vibration Analysis for Multi-Cylinder Diesel Engine
of
International Journal of Science and Advanced Technology
(IJSAT), ISSN (Print): 2304-652X, ISSN (Online) 2221-8386, Volume
1, No. 2, Page.
April 2011
-
10/9
SL90 Type No.55-61, April 2011. 59. 1
1.
Detecting Power Imbalance in Multi-Cylinder Inline Diesel Engine
Genset
Journal of Electronic Science & Technology (JEST
International), ISSN (Print): 1674-862X, China, Vol. 8 No. 3, Sept.
2010, Page. No.273-278, Indexing- ESCI/Web of Science, Scopus,
DOI:10.3969/j.issn.1674-862X.2010.03.013.
Sept. 2010
60. 12.
Cylinder Imbalance Detection of Six Cylinder DI Diesel Engine
Using Pressure Variation
International Journal of Engineering Science and Technology
(IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2,
no.4, April 2010, Page No.433-441, , [Index Copernicus (I C
Value)-3.14, 2013]
April 2010,
61. 13.
Torsional Frequency Analysis of Multi-Cylinder Inline Diesel
Engine Generator System
Proc. ASME, ISBN:978-0-7918-5954-4, Vol. 1, Page No. 519-52,
Publisher-ASME Press. Indexing- CPCI/Web of Science/Scopus.
DOI-10.1115/1.859544.paper81.
January 2010
62. 14.
Harmonic Frequency Analysis of Multi-Cylinder Inline Diesel
Engine Gen-set for Detecting Imbalance,
International Review of Mechanical Engineering (IREME)
International Journal), ISSN (Print):1970–8734, ISSN (Online):1970
- 8742 Vol.3, No.6, Page No. 782-787, November 2009, Publisher-
Praise Worthy Prize S.r.l, Italy Indexing- Scopus.
November 2009
As a Co-Author:
63. 15.
A Comparative Study on Different Types of Approaches to Text
Categorization
International Journal of Machine Learning and Computing (IJMLC),
ISSN (Print): 2010-3700, Vol. 2, No. 4, Page No.423-426, August
2012. Publisher-IACSIT Singapore. Italy Indexing- Scopus. DOI:
10.7763/IJMLC.2012.V2.158
August 2012
64. 16.
M-Commerce Security using Random LSB Steganography and
Cryptography
International Journal of Machine Learning and Computing (IJMLC),
ISSN (Print): 2010-3700, Vol. 2, No. 4, Page No.427-430, August
2012. Publisher-IACSIT Singapore. Italy Indexing- Scopus. DOI:
10.7763/IJMLC.2012.V2.159
August 2012
65. 17.
Real- time Static Hand Gesture Recognition For American Sign
Language (ASL) in Complex Background
Journal of Signal and Information Processing [JSIP], ISSN
(Print): 2159-4465, ISSN (Online): 2159-4481, Vol.3, no.3, August
2012, Publisher- Scientific Research, California, USA, DOI:
10.4236/jsip.2012.33047
August 2012,
66. 18.
Design Optimization of Cam & Follower Mechanism of an
Internal Combustion Engine for Improving the Engine Efficiency
Modern Mechanical Engineering (MME), ISSN (Print): 2164-0165,
ISSN (Online): 2164-0181, Vol.2, No.3, August 2012, Page No.
114-119, Publisher- Scientific Research, California, USA. This work
was supported by MAN Trucks India Pvt. Ltd., Pune, India, Pune,
DOI: 10.4236/mme.2012.23014
August 2012
67. 19.
Finite Element Analysis of Dynamic Damper for CV Joint
Energy Power and Engineering (EPE), ISSN (Print): 1949-243X,
ISSN(Online): 1947-3818, Vol.4, no.4, Page No. 241-247, July 2012,
Publisher- Scientific Research, California, USA.
DOI:10.4236/epe.2012.44033
July 2012
68. 20
Experimental and Finite Element Stress Analysis Of
Proc. ASME 2011 , Vol.1, Page No. 453-458, ISBN: 0-7918-5981-9,
August 26-27, 2011, Publisher-
August 2011
http://dx.doi.org/10.1115/1.859544.paper81http://dx.doi.org/10.4236/jsip.2012.33047
-
11/9
. Three Wheeler Front Fender
ASME Press. DOI: 10.1115/1.859810.paper74
69. 21.
Experimental Investiga-tions of Bearing Capacity for
Eccentrically Loaded Footing
International Journal of Engineering Science and Technology
(IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2,
no.10, October 2010, Page No. 5255-5262, [Index Copernicus (I C
Value)-3.14, 2011-12].
October 2010
70. 22.
Experimental Investiga-tions of Surface Roughness On OFHC Copper
By Diamond Turning Machine,
International Journal of Engineering Science and Technology
(IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2,
No.10, October 2010, Page No. 5215-5220, [Index Copernicus (I C
Value)-3.14, 2011-12].
October 2010
71. 23.
Design & Development of Attachment for Hydraulic Stacker
International Journal of Engineering Science and Technology
(IJEST), ISSN (Print): 2278-9510, ISSN: 0975-5462,Vol. 2, No.5, May
2010, Page No. 796-801, work was Funded byA.V.L Seating System Ltd.
Pune[Index Copernicus (I C Value)-3.14, 2011-12].
May 2010
72. 24.
Experimental Investiga-tions of Weld Characteristics For A
Single Pass TIG Welding With SS304
International Journal of Engineering Science and Technology
(IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2,
no.8, Page No. 3676-3686, April 2010, [Index Copernicus (I C
Value)-3.14, 2011-12].
April 2010
73. 25.
Design and Development of Powerised Blade Valve for Automated
Packaging of Heterogeneous Mixtures,
World Academy of Science Engineering & Technology [WASET],
ISSN (Print): 2070-3724, Vol.69, Page No. 478-481, Feb. 2010. This
work was funded by Nichrome India Ltd, Pune.
February 2010
Papers Presented in National & International Conferences in
India 74. 2
6.
Computer Aided Design & Simulation of Steering Gear
Mechanism
Presented in 3rd National Conference on ‘Recent Developments in
Mechanical Engineering [RDME-2013] at M.ES. College of Engg.
Pune-01
13-14, March, 2014
75. 2
7.
Flow Induced Vibration Analysis Of Shell And Tube Heat
Exchanger
Presented in National Conference on ‘Recent Developments in
Mechanical Engineering [RDME-2011] at M.ES. College of Engg.
Pune-01
4-5, July, 2011
76. 2
8.
Geometric Design Of Spiral Tube Heat Exchanger
Presented in National Conference on [RDME-2011] at Modern
Education Society’s College of Engineering, Pune-01
4-5, July, 2011
77. 2
9.
Study Of Influence Of Crack On Transmission Shaft By Finite
Element Analysis
Presented in National Conference on [RDME-2011] at Modern
Education Society’s College of Engineering, Pune-01
4-5, July, 2011
78. 30.
Use of Computers in Tribology: Computer Tribology
National Conference NCRP-2006, VNIT Nagpur 10-11 March-2006
79. 31.
3D Finite Element Analysis by Using JAVA 3D API
International Conference on ICMPM, At BIT Coimbatore ,
Tamil-Nadu, India
12-14 Dec-2005
80. 3
2.
Analysis of Bearings and lubricants in Electric Environment
4th National Symposium META VISTA-2004 PIET Pune-05
16-18 Feb-2005
-
12/9
81. 33.
Analysis of Rolling Element Bearing and lubricants in Electric
Environment
National Conference AIM-2005 at VCE Hyderbad, Osmania
University
12-14 May-2005
82. 34.
Evaluation of Evolvability of ANN for Robot Control
National Conference AIM-2005 at VCE Hyderbad, Osmania
University
12-14 May-2005
83. 35.
Tribological Analysis of Gear & Gearbox Problems
1st National Conference YANTRA - 2005 at COE Pandharpur
23-24 Dec-2005
*****