-
1
NACE Standards and Reports as They Relate to Industry Sectors in
the Cost of Corrosion Study
Click on the links below to go to specific industry sectors.
Highway Bridges
Gas and Liquid Transmission Pipelines
Waterways and Ports
Hazardous Material Storage
Airports
Railroads
Gas Distribution
Drinking Water and Sewer Systems
Electrical Utilities
Telecommunications
Motor Vehicles
Ships
Aircraft
Railroad Cars
Hazardous Materials Transport
Oil and Gas Exploration and Production
Mining
Petroleum Refining
Chemical, Petrochemical, and Pharmaceutical
Pulp and Paper
Agricultural
Food Processing
Electronics
Home Appliances
Defense
Nuclear Waste Storage
-
2
NACE Standards and Reports as They Relate to Industry Sectors in
the Cost of Corrosion Study
Industry Sector
NACE Standards Technical Committee Reports
RP0281-98, Method for Conducting Coating (Paint) Panel
Evaluation Testing in Atmospheric Exposures
01101, Electrochemical Chloride Extraction from Steel-Reinforced
ConcreteA State-of-the-Art Report
RP0187-96, Design Considerations for Corrosion Control of
Reinforcing Steel in Concrete
01102, State-of-the-Art Report: Criteria for Cathodic Protection
of Prestressed Concrete Structures
RP0287-2002, Field Measurement of Surface Profile of Abrasive
Blast Cleaned Steel Surfaces Using a Replica Tape
05101, State-of-the-Art Survey on Corrosion of Steel Pilings in
Soils
RP0188-99, Discontinuity (Holiday) Testing of New Protective
Coatings on Conductive Substrates
3C194, Economics of Corrosion
RP0290-2000, Impressed Current Cathodic Protection of
Reinforcing Steel in Atmospherically Exposed Concrete
Structures
6A287, Electroless Nickel Coatings (1997 Edition)
RP0390-98, Maintenance and Rehabilitation Considerations for
Corrosion Control of Existing Steel-Reinforced Concrete
Structures
6A194, Surface Preparation Overview for Electroless Nickel
Coatings
RP0690-98, Standard Format for Collection and Compilation of
Data for Computerized Material Corrosion Resistance Database
Input
6A294, Quality Evaluation of Electroless Nickel Coatings
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
6A195, Introduction to Thick-Film Polyurethanes
RP0395-99, Fusion-Bonded Epoxy Coating of Steel Reinforcing
Bars
6A198, Introduction to Thick-Film Polyurethanes, Polyureas, and
Blends
RP0197-97, Standard Format for Computerized Electrochemical
Polarization Curve Data Files
6A100, Coatings Used in Conjunction with Cathodic Protection
TM0294-2001, Testing of Embeddable Impressed Current Anodes for
Use in Cathodic Protection of Atmospherically Exposed
Steel-Reinforced Concrete
6G197/SSPC-TU 2, Design, Installation, and Maintenance of
Coating Systems for Concrete Used in Secondary Containment
NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning 6G198/SSPC-TR
2, Wet Abrasive Blast Cleaning NACE No. 2/SSPC-SP 10, Near-White
Metal Blast Cleaning 6H188, Coating over Nonabrasive-Cleaned Steel
Surfaces
(1996 Edition) NACE No. 3/SSPC-SP 6, Commercial Blast Cleaning
6H192, Conversion Coatings: A State-of-the-Art Report
Highway Bridges
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 43, 45, 46, 60, 61,
62, 63)
NACE No. 4/SSPC-SP 7, Brush-Off Blast Cleaning 6H194, Combatting
Adhesion Problems when Applying New to Existing Finish Coats of
Paint
-
3
Industry Sector
NACE Standards Technical Committee Reports
NACE No. 5/SSPC-SP 12, Surface Preparation and Cleaning of
Metals by Waterjetting Prior to Recoating
80200/SSPC-TR 4, Preparation of Protective Coating
Specifications for Atmospheric Service
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete 11100,
Use of Reference Electrodes for Atmospherically Exposed Reinforced
Concrete Structures
NACE VIS 7/SSPC VIS 4, Guide and Visual Reference Photographs
for Steel Cleaned by Waterjetting
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning
NACE VIS 9/SSPC VIS 5, Guide and Reference Photographs for Steel
Surfaces Prepared by Wet Abrasive Blast Cleaning
Industry Sector
NACE Standards Technical Committee Reports
RP0169-2002, Control of External Corrosion on Underground or
Submerged Metallic Piping Systems
1E100, Engineering Symbols Related to Cathodic Protection
RP0572-2001, Design, Installation, Operation, and Maintenance of
Impressed Current Deep Groundbeds
1F196, Survey of CRA Tubular Usage
RP0274-98, High-Voltage Electrical Inspection of Pipeline
Coatings Prior to Installation
05101, State-of-the-Art Survey on Corrosion of Steel Piling in
Soils
RP0375-99, Wax Coating Systems for Underground Piping
Systems
3C194, Economics of Corrosion
RP0177-2000, Mitigation of Alternating Current and Lightning
Effects on Metallic Structures and Corrosion Control Systems
3T199, Techniques for Monitoring Corrosion and Related
Parameters in Field Applications
RP0185-96, Extruded Polyolefin Resin Coating Systems with Soft
Adhesives for Underground or Submerged Pipe
10A192, State-of-the-Art Report on Steel-Cased Pipeline
Practices
RP0286-2002, The Electrical Isolation of Cathodically Protected
Pipelines
10A292, Corrosion Control of Ductile and Cast Iron Pipe
RP0287-2002, Field Measurement of Surface Profile of Abrasive
Blast Cleaned Steel Surfaces Using a Replica Tape
10A392, Effectiveness of Cathodic Protection on Thermally
Insulated Underground Metallic Structures
RP0490-2001, Holiday Detection of Fusion-Bonded Epoxy External
Pipeline Coatings of 250 to 760 m (10 to 30 mils)
10A196, Impressed Current Anodes for Underground Cathodic
Protection Systems
RP0394-2002, Application, Performance, and Quality Control of
Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
10D194, State-of-the-Art Report on Rockshielding
Gas and Liquid Transmission Pipelines
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 11, 30, 31, 32, 33,
34, 35, 36, 37, 38, 39, 44, 60, 61, 62, 63)
RP0399-99, Plant-Applied, External Coal Tar Enamel Pipe Coating
Systems: Application, Performance, and Quality Control
10D199, Coatings for the Repair and Rehabilitation of the
External Coatings of Buried Steel Pipelines
-
4
Industry Sector
NACE Standards Technical Committee Reports
RP0100-2000, Cathodic Protection of Prestressed Concrete
Cylinder Pipelines
35100, In-Line Nondestructive Testing of Pipelines
RP0200-2000, Steel-Cased Pipeline Practices 35101, Plastic
Liners for Oilfield Pipelines RP0102-2002, In-Line Inspection of
Pipelines 35201, Technical Report on the Application and
Interpretation
of Data from External Coupons Used in the Evaluation of
Cathodically Protected Metallic Structures
RP0402-2002, Field-Applied Fusion-Bonded Epoxy (FBE) Pipe
Coating Systems for Girth Weld Joints: Application, Performance,
and Quality Control
A Guide to the Organization of Underground Corrosion-Control
Coordinating Committees, TPC 11
RP0502-2002, Pipeline External Corrosion Direct Assessment
Methodology
10D199, Coatings for the Repair and Rehabilitation of the
External Coatings of Buried Steel Pipelines
RP0602-2002, Field-Applied Coal Tar Enamel Pipe Coating Systems:
Application, Performance, and Quality Control
TM0172-2001, Determining Corrosive Properties of Cargoes in
Petroleum Product Pipelines
TM0284-96, Evaluation of Pipeline and Pressure Vessel Steels for
Resistance to Hydrogen-Induced Cracking
TM0497-2002, Measurement Techniques Related to Criteria for
Cathodic Protection on Underground or Submerged Metallic Piping
Systems
TM0298-98, Evaluating the Compatibility of FRP Pipe and Tubulars
with Oilfield Environments
TM0102-2002, Measurement of Protective Coating Electrical
Conductance on Underground Pipelines
Industry Sector
NACE Standards Technical Committee Reports
RP0176-94, Corrosion Control of Steel Fixed Offshore Platforms
Associated with Petroleum Production
01101, Electrochemical Chloride Extraction from Steel-Reinforced
ConcreteA State-of-the-Art Report
RP0387-99, Metallurgical and Inspection Requirements for Cast
Sacrificial Anodes for Offshore Applications
01102, State-of-the-Art Report: Criteria for Cathodic Protection
of Prestressed Concrete Structures
RP0492-99, Metallurgical and Inspection Requirements for
Offshore Pipeline Bracelet Anodes
1G194, Splash Zone Maintenance Systems for Marine Steel
Structures
Waterways and Ports
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 35, 44, 45, 60, 62,
63)
TM0190-98, Impressed Current Test Method for Laboratory Testing
of Aluminum Anodes
3C194, Economics of Corrosion
-
5
Industry Sector
NACE Standards Technical Committee Reports
NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning 6A287,
Electroless Nickel Coatings (1997 Edition) NACE No. 2/SSPC-SP 10,
Near-White Metal Blast Cleaning 6A194, Surface Preparation Overview
for Electroless Nickel
Coatings NACE No. 3/SSPC-SP 6, Commercial Blast Cleaning 6A294,
Quality Evaluation of Electroless Nickel Coatings NACE No.
4/SSPC-SP 7, Brush-Off Blast Cleaning 6A195, Introduction to
Thick-Film Polyurethanes NACE No. 5/SSPC-SP 12, Surface Preparation
and Cleaning of Metals by Waterjetting Prior to Recoating
6A198, Introduction to Thick-Film Polyurethanes, Polyureas, and
Blends
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete 6A100,
Coatings Used in Conjunction with Cathodic Protection NACE VIS
7/SSPC VIS 4, Guide and Visual Reference Photographs for Steel
Cleaned by Waterjetting
6G197/SSPC-TU 2, Design, Installation, and Maintenance of
Coating Systems for Concrete Used in Secondary Containment
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning 6G198/SSPC-TR
2, Wet Abrasive Blast Cleaning NACE VIS 9/SSPC VIS 5, Guide and
Reference Photographs for Steel Surfaces Prepared by Wet Abrasive
Blast Cleaning
6H188, Coating over Nonabrasive-Cleaned Steel Surfaces (1996
Edition)
6H192, Conversion Coatings: A State-of-the-Art Report 6H194,
Combatting Adhesion Problems when Applying New to
Existing Finish Coats of Paint 7L192, Cathodic Protection Design
Considerations for Deep
Water Structures 7L198, Design of Galvanic Anode Cathodic
Protection Systems
for Offshore Structures 80200/SSPC-TR 4, Preparation of
Protective Coating
Specifications for Atmospheric Service
11100, Use of Reference Electrodes for Atmospherically Exposed
Reinforced Concrete Structures
-
6
Industry Sector
NACE Standards Technical Committee Reports
RP0178-95, Fabrication Details, Surface Finish Requirements, and
Proper Design Considerations for Tanks and Vessels to Be Lined for
Immersion Service
5A171, Materials for Receiving, Handling, and Storing
Hydrofluoric Acid (2001 Revision)
RP0180-2001, Cathodic Protection of Pulp and Paper Mill Effluent
Clarifiers
5A192, Integrity of Equipment in Anhydrous Ammonia Storage and
Handling
RP0391-2002, Materials for the Handling and Storage of
Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient
Temperatures
6A192/SSPC-TR 3, Dehumidification and Temperature Control During
Surface Preparation, Application, and Curing for Coatings/Linings
of Steel Tanks, Vessels, and Other Enclosed Spaces (2000
Edition)
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
6G197/SSPC-TU 2, Design, Installation, and Maintenance of
Coating Systems for Concrete Used in Secondary Containment
RP0294-94, Design, Fabrication, and Inspection of Tanks for the
Storage of Concentrated Sulfuric Acid and Oleum at Ambient
Temperatures
6G198/SSPC-TR 2, Wet Abrasive Blast Cleaning
TM0174-2002, Laboratory Methods for the Evaluation of Protective
Coatings and Llining Materials in Immersion Service
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on NACE Web site
TM0196-96, Chemical Resistance of Polymeric Materials by
Periodic Evaluation
Hazardous Material Storage
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 11, 34, 35, 36, 38, 39,
40, 43, 45, 46, 60, 61, 62, 63)
NACE No. 10/SSPC-PA 6, Fiberglass-Reinforced Plastic (FRP)
Linings Applied to Bottoms of Carbon Steel Aboveground Storage
Tanks
-
7
Industry Sector
NACE Standards Technical Committee Reports
RP0281-98, Method for Conducting Coating (Paint) Panel
Evaluation Testing in Atmospheric Exposures
01101, Electrochemical Chloride Extraction from Steel-Reinforced
ConcreteA State-of-the-Art Report
RP0187-96, Design Considerations for Corrosion Control of
Reinforcing Steel in Concrete
01102, State-of-the-Art Report: Criteria for Cathodic Protection
of Prestressed Concrete Structures
RP0287-2002, Field Measurement of Surface Profile of Abrasive
Blast Cleaned Steel Surfaces Using a Replica Tape
3C194, Economics of Corrosion
RP0188-99, Discontinuity (Holiday) Testing of New Protective
Coatings on Conductive Substrates
6A287, Electroless Nickel Coatings (1997 Edition)
RP0290-2000, Impressed Current Cathodic Protection of
Reinforcing Steel in Atmospherically Exposed Concrete
Structures
6A194, Surface Preparation Overview for Electroless Nickel
Coatings
RP0390-98, Maintenance and Rehabilitation Considerations for
Corrosion Control of Existing Steel-Reinforced Concrete
Structures
6A294, Quality Evaluation of Electroless Nickel Coatings
RP0690-98, Standard Format for Collection and Compilation of
Data for Computerized Material Corrosion Resistance Database
Input
6A195, Introduction to Thick-Film Polyurethanes
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
6A198, Introduction to Thick-Film Polyurethanes, Polyureas, and
Blends
RP0395-99, Fusion-Bonded Epoxy Coating of Steel Reinforcing
Bars
6A100, Coatings Used in Conjunction with Cathodic Protection
RP0197-97, Standard Format for Computerized Electrochemical
Polarization Curve Data Files
6G197/SSPC-TU 2, Design, Installation, and Maintenance of
Coating Systems for Concrete Used in Secondary Containment
TM0294-2001, Testing of Embeddable Impressed Current Anodes for
Use in Cathodic Protection of Atmospherically Exposed
Steel-Reinforced Concrete
6G198/SSPC-TR 2, Wet Abrasive Blast Cleaning
NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning 6H188, Coating
over Nonabrasive-Cleaned Steel Surfaces (1996 Edition)
NACE No. 2/SSPC-SP 10, Near-White Metal Blast Cleaning 6H192,
Conversion Coatings: A State-of-the-Art Report NACE No. 3/SSPC-SP
6, Commercial Blast Cleaning 6H194, Combatting Adhesion Problems
when Applying New to
Existing Finish Coats of Paint NACE No. 4/SSPC-SP 7, Brush-Off
Blast Cleaning 80200/SSPC-TR 4, Preparation of Protective
Coating
Specifications for Atmospheric Service NACE No. 5/SSPC-SP 12,
Surface Preparation and Cleaning of Metals by Waterjetting Prior to
Recoating
11100, Use of Reference Electrodes for Atmospherically Exposed
Reinforced Concrete Structures
Airports
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 35, 40, 46, 60, 62,
63)
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete
-
8
Industry Sector
NACE Standards Technical Committee Reports
NACE VIS 7/SSPC VIS 4, Guide and Visual Reference Photographs
for Steel Cleaned by Waterjetting
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning
NACE VIS 9/SSPC VIS 5, Guide and Reference Photographs for Steel
Surfaces Prepared by Wet Abrasive Blast Cleaning
Industry Sector
NACE Standards Technical Committee Reports
RP0572-2001, Design, Installation, Operation, and Maintenance of
Impressed Current Deep Groundbeds
05101, State-of-the-Art Survey on Corrosion of Steel Piling in
Soils
RP0177-2000, Mitigation of Alternating Current and Lightning
Effects on Metallic Structures and Corrosion Control Systems
1E100, Engineering Symbols Related to Cathodic Protection
RP0297-97, Maintenance Painting of Electrical Substation
Apparatus Including Flow Coating of Transformer Radiators
3C194, Economics of Corrosion
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
10D194, State-of-the-Art Report on Rockshielding
Railroads
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 35, 43, 46, 60, 62,
63)
A Guide to the Organization of Underground Corrosion-Control
Coordinating Committees, TPC 11
Industry Sector
NACE Standards Technical Committee Reports
RP0169-2002, Control of External Corrosion on Underground or
Submerged Metallic Piping Systems
1E100, Engineering Symbols Related to Cathodic Protection
RP0572-2001, Design, Installation, Operation, and Maintenance of
impressed Current Deep Groundbeds
1F196, Survey of CRA Tubular Usage
RP0274-98, High-Voltage Electrical Inspection of Pipeline
Coatings Prior to Installation
05101, State-of-the-Art Survey on Corrosion of Steel Piling in
Soils
RP0375-99, Wax Coating Systems for Underground Piping
Systems
3C194, Economics of Corrosion
RP0177-2000, Mitigation of Alternating Current and lightning
Effects on Metallic Structures and Corrosion Control Systems
3T199, Techniques for Monitoring Corrosion and Related
Parameters in Field Applications
Gas Distribution
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 31, 32, 34, 35, 60,
61, 62, 63)
RP0185-96, Extruded Polyolefin Resin Coating Systems with Soft
Adhesives for Underground or Submerged Pipe
10A192, State-of-the-Art Report on Steel-Cased Pipeline
Practices
-
9
Industry Sector
NACE Standards Technical Committee Reports
RP0285-2002, Corrosion Control of Underground Storage Tank
Systems by Cathodic Protection
10A292, Corrosion Control of Ductile and Cast Iron Pipe
RP0286-2002, The Electrical Isolation of Cathodically Protected
Pipelines
10A392, Effectiveness of Cathodic Protection on Thermally
Insulated Underground Metallic Structures
RP0287-2002, Field Measurement of Surface Profile of Abrasive
Blast Cleaned Steel Surfaces Using a Replica Tape
10A196, Impressed Current Anodes for Underground Cathodic
Protection Systems
RP0490-2001, Holiday Detection of Fusion-Bonded Epoxy External
Pipeline Coatings of 250 to 760 m (10 to 30 mils)
10D194, State-of-the-Art Report on Rockshielding
RP0193-2001, External Cathodic Protection of On-Grade Carbon
Steel Storage Tank Bottoms
10D199, Coatings for the Repair and Rehabilitation of the
External Coatings of Buried Steel Pipelines
RP0394-2002, Application, Performance, and Quality Control of
Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
35101, Plastic Liners for Oilfield Pipelines
RP0399-99, Plant-Applied, External Coal Tar Enamel Pipe Coating
Systems: Application, Performance, and Quality Control
35201, Technical Report on the Application and Interpretation of
Data from External Coupons Used in the Evaluation of Cathodically
Protected Metallic Structures
RP0200-2000, Steel-Cased Pipeline Practices A Guide to the
Organization of Underground Corrosion-Control Coordinating
Committees, TPC 11
RP0402-2002, Field-Applied Fusion-Bonded Epoxy (FBE) Pipe
Coating Systems for Girth Weld Joints: Application, Performance,
and Quality Control
RP0602-2002, Field-Applied Coal Tar Enamel Pipe Coating Systems:
Application, Performance, and Quality Control
TM0497-2002, Measurement Techniques Related to Criteria for
Cathodic Protection on Underground or Submerged Metallic Piping
Systems
TM0101-2001, Measurement Techniques Related to Criteria for
Cathodic Protection on Underground or Submerged Metallic Tank
Systems
TM0102-2002, Measurement of Protective Coating Electrical
Conductance on Underground Pipelines
-
10
Industry Sector
NACE Standards Technical Committee Reports
RP0169-2002, Control of External Corrosion on Underground or
Submerged Metallic Piping Systems
6A287, Electroless Nickel Coatings (1997 Edition) RP0375-99, Wax
Coating Systems for Underground Piping Systems
6A194, Surface Preparation Overview for Electroless Nickel
Coatings
RP0185-96, Extruded Polyolefin Resin Coating Systems with Soft
Adhesives for Underground or Submerged Pipe
6A294, Quality Evaluation of Electroless Nickel Coatings
RP0388-2001, Impressed Current Cathodic Protection of Internal
Submerged Surfaces of Carbon Steel Water Storage Tanks
6A195, Introduction to Thick-Film Polyurethanes
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
6A198, Introduction to Thick-Film Polyurethanes, Polyrueas, and
Blends
RP0193-2001, External Cathodic Protection of On-Grade Carbon
Steel Storage Tank Bottoms
6A100, Coatings Used in Conjunction with Cathodic Protection
RP0394-2002, Application, Performance, and Quality Control of
Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
6H192, Conversion Coatings: A State-of-the-Art Report
RP0196-96, Galvanic Anode Cathodic Protection of Internal
Submerged Surfaces of Steel Water Storage Tanks
7G181, Investigation of the Effects of Corrosion-Inhibiting
Treatments on Mechanical Seals in Recirculating Hot Water Systems
(1997 Edition)
RP0497-97, Field Corrosion Evaluation Using Metallic Test
Specimens
7H100, Evaluation of Boiler Tube Deposit Mass Loading (Deposit
Weight Density) Methodology
RP0298-98, Sheet Rubber Linings for Abrasion and Corrosion
Service
7K189, Control Factors in Performance Testing of Nonchemical
Water Treatment Devices (1997 Edition)
RP0399-99, Plant-Applied, External Coal Tar Enamel Pipe Coating
Systems: Application, Performance, and Quality Control
7K198, Predictably Effective Equipment and In Situ Processes
Applied to Water Systems
RP0602-2002, Field-Applied Coal Tar Enamel Pipe Coating Systems:
Application, Performance, and Quality Control
7N197, Considerations for Water Reuse in Industrial Plants
TM0169-2000, Laboratory Corrosion Testing of Metals 10A192,
Corrosion Control of Ductile and Cast Iron Pipe TM0190-98,
Impressed Current Test Method for Laboratory Testing of Aluminum
Anodes
10A196, Impressed Current Anodes for Underground Cathodic
Protection Systems
TM0497-2002, Measurement Techniques Related to Criteria for
Cathodic Protection on Underground or Submerged Metallic Piping
Systems
10D194, State-of-the-Art Report on Rockshielding
TM0499-99, Immersion Corrosion Testing of Ceramic Materials
10D199, Coatings for the Repair and Rehabilitation of External
Coatings of Buried Steel Pipelines
Drinking Water and Sewer Systems
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 11, 35, 45, 46, 60,
61, 62, 63)
A Guide to the Organization of Underground Corrosion-Control
Coordinating Committees, TPC 11
-
11
Industry Sector
NACE Standards Technical Committee Reports
RP0572-2001, Design, Installation, Operation, and Maintenance of
Impressed Current Deep Groundbeds
05101, State-of-the-Art Survey on Corrosion of Steel Piling in
Soils
RP0177-2000, Mitigation of Alternating Current and Lightning
Effects on Metallic Structures and Corrosion Control Systems
1E100, Engineering Symbols Related to Cathodic Protection
RP0487-2000, Considerations in the Selection and Evaluation of
Rust Preventives and Vapor Corrosion Inhibitors for Interim
(Temporary) Corrosion Protection
10C198, Corrosion of Cable Shielding for Telecommunications
Cable
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
10D194, State-of-the-Art Report on Rockshielding
RP0297-97, Maintenance Painting of Electrical Substation
Apparatus Including Flow Coating of Transformer Radiators
42102, Corrosion in Power and Communication Manholes
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
A Guide to the Organization of Underground Corrosion-Control
Coordinating Committees, TPC 11
RP0298-98, Sheet Rubber Linings for Abrasion and Corrosion
Service
RP0182-95, Initial Conditioning of Cooling Water Equipment
RP0189-2002, On-Line Monitoring of Cooling Waters RP0590-96,
Recommended Practice for Prevention, Detection, and Correction of
Deaerator Cracking
RP0392-2001, Recovery and Repassivation After Low pH Excursions
in Open Recirculating Cooling Water Systems
RP0300-2000, Pilot Scale Evaluation of Corrosion and Scale
Control Additives for Open Recirculating Cooling Water Systems
TM0286-2001, Cooling Water Test Unit Incorporating Heat Transfer
Surfaces
Electrical Utilities
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 41, 42, 45, 46, 60, 62,
63)
TM0199-99, Standard Test Method for Measuring Deposit Mass
Loading (Deposit Weight Density) Values for Boiler Tubes by the
Glass-Bead-Blasting Technique
-
12
Industry Sector NACE Standards Technical Committee Reports
RP0177-2000, Mitigation of Alternating Current and Lightning
Effects on Metallic Structures and Corrosion Control Systems
05101, State-of-the-Art Survey on Corrosion of Steel Piling in
Soils
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
10C198, Corrosion of Cable Shielding for Telecommunications
Cable
RP0297-97, Maintenance Painting of Electrical Substation
Apparatus Including Flow Coating of Transformer Radiators
42102, Corrosion in Power and Communication Manholes
Telecommunications
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 42, 46, 60, 62, 63)
RP0497-97, Field Corrosion Evaluation Using Metallic Test
Specimens
Industry Sector
NACE Standards Technical Committee Reports
NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning 14D194,
Resource Materials and Services for Materials Selection and
Corrosion Control in the Cargo Tank Industry
NACE No. 2/SSPC-SP 10, Near-White Metal Blast Cleaning NACE No.
3/SSPC-SP 6, Commercial Blast Cleaning NACE No. 4/SSPC-SP 7,
Brush-Off Blast Cleaning NACE No. 5/SSPC-SP 12, Surface Preparation
and Cleaning of Metals by Waterjetting Prior to Recoating
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete NACE VIS
7/SSPC VIS 4, Guide and Visual Reference Photographs for Steel
Cleaned by Waterjetting
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning
Motor Vehicles
(STGs 02, 04, 06, 07, 08, 10, 43, 60, 61, 62, 63)
NACE VIS 9/SSPC VIS 5, Guide and Reference Photographs for Steel
Surfaces Prepared by Wet Abrasive Blast Cleaning
-
13
Industry Sector
NACE Standards Technical Committee Reports
RP0178-95, Fabrication Details, Surface Finish Requirements, and
Proper Design Considerations for Tanks and Vessels to Be Lined for
Immersion Service
3C194, Economics of Corrosion
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
6A287, Electroless Nickel Coatings (1997 Edition)
TM0174-2002, Laboratory Methods for the Evaluation of Protective
Coatings and Lining Materials in Immersion Service
6A194, Surface Preparation Overview for Electroless Nickel
Coatings
NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning 6A294, Quality
Evaluation of Electroless Nickel Coatings NACE No. 2/SSPC-SP 10,
Near-White Metal Blast Cleaning 6A195, Introduction to Thick-Film
Polyurethanes NACE No. 3/SSPC-SP 6, Commercial Blast Cleaning
6A198, Introduction to Thick-Film Polyurethanes, Polyureas, and
Blends NACE No. 4/SSPC-SP 7, Brush-Off Blast Cleaning 6A100,
Coatings Used in Conjunction with Cathodic Protection NACE No.
5/SSPC-SP 12, Surface Preparation and Cleaning of Metals by
Waterjetting Prior to Recoating
6G197/SSPC-TU 2, Design, Installation, and Maintenance of
Coating Systems for Concrete Used in Secondary Containment
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete
6G198/SSPC-TR 2, Wet Abrasive Blast Cleaning NACE VIS 7/SSPC VIS 4,
Guide and Visual Reference Photographs for Steel Cleaned by
Waterjetting
6H188, Coating over Nonabrasive-Cleaned Steel Surfaces (1996
Edition)
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning 6H192,
Conversion Coatings: A State-of-the-Art Report NACE VIS 9/SSPC VIS
5, Guide and Reference Photographs for Steel Surfaces Prepared by
Wet Abrasive Blast Cleaning
6H194, Combatting Adhesion Problems when Applying New to
Existing Finish Coats of Paint
Ships
(STGs 02, 03, 04, 05, 06, 07, 08, 10, 44, 60, 61, 62, 63)
80200/SSPC-TR 4, Preparation of Protective Coating
Specifications for Atmospheric Service
Industry Sector
NACE Standards Technical Committee Reports
NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning 3C194,
Economics of Corrosion NACE No. 2/SSPC-SP 10, Near-White Metal
Blast Cleaning 6A287, Electroless Nickel Coatings (1997 Edition)
NACE No. 3/SSPC-SP 6, Commercial Blast Cleaning 6A194, Surface
Preparation Overview for Electroless Nickel
Coatings NACE No. 4/SSPC-SP 7, Brush-Off Blast Cleaning 6A294,
Quality Evaluation of Electroless Nickel Coatings NACE No.
5/SSPC-SP 12, Surface Preparation and Cleaning of Metals by
Waterjetting Prior to Recoating
6A195, Introduction to Thick-Film Polyurethanes
Aircraft
(STGs 02, 04, 06, 07, 08, 10, 40, 60, 61, 62, 63)
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete 6A198,
Introduction to Thick-Film Polyurethanes, Polyureas, and Blends
-
14
Industry Sector
NACE Standards Technical Committee Reports
NACE VIS 7/SSPC VIS 4, Guide and Visual Reference Photographs
for Steel Cleaned by Waterjetting
6A100, Coatings Used in Conjunction with Cathodic Protection
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning
NACE VIS 9/SSPC VIS 5, Guide and Reference Photographs for Steel
Surfaces Prepared by Wet Abrasive Blast Cleaning
Industry Sector
NACE Standards Technical Committee Reports
RP0386-97, Application of a Coating System to Interior Surfaces
of Covered Hopper Rail Cars in Plastic, Food, and Chemical
Service
3C194, Economics of Corrosion
RP0592-2001, Application of a Coating System to Interior
Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%)
Sulfuric Acid Service
6A287, Electroless Nickel Coatings (1997 Edition)
RP0692-97, Application of a Coating System to Exterior Surfaces
of Steel Rail Cars
6A194, Surface Preparation Overview for Electroless Nickel
Coatings
RP0295-95, Application of a Coating System to Interior Surfaces
of New and Used Rail Tank Cars
6A294, Quality Evaluation of Electroless Nickel Coatings
RP0495-95, Guidelines for Qualifying Personnel as Abrasive
Blasters and Coating and Lining Applicators in the Rail
Industries
6A195, Introduction to Thick-Film Polyurethanes
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
6A198, Introduction to Thick-Film Polyurethanes, Polyureas, and
Blends
RP0398-98, Recommendations for Training and Qualifying Personnel
as Railcar Coating and Lining Inspectors
6A100, Coatings Used in Conjunction with Cathodic Protection
RP0302-2002, Selection and Application of a Coating System to
Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur
Service
6G194/SSPC-SP-TR 1, Thermal Precleaning
14C196, The Application of Solvent-Free Epoxy Coatings to
Railcars using Plural-Component Spray Equipment
Railroad Cars
(STGs 02, 04, 06, 07, 08, 43, 60, 61, 62, 63)
14C296, A State-of-the-Art Report on Protective Coatings for
Mitigating Corrosion Under Insulation on Rail Tank Cars
-
15
Industry Sector
NACE Standards Technical Committee Reports
RP0386-97, Application of a Coating System to Interior Surfaces
of Covered Hopper Rail Cars in Plastic, Food, and Chemical
Service
6G194/SSPC-SP-TR 1, Thermal Precleaning
RP0592-2001, Application of a Coating System to Interior
Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%)
Sulfuric Acid Service
14C196, The Application of Solvent-Free Epoxy Coatings to
Railcars Using Plural-Component Spray Equipment
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
14C296, A State-of-the-Art Report on Protective Coatings for
Mitigating Corrosion Under Insulation on Rail Tank Cars
RP0295-95, Application of a Coating System to Interior Surfaces
of New and Used Rail Tank Cars
14D194, Resource Materials and Services for Materials Selection
and Corrosion Control in the Cargo Tank Industry
RP0495-95, Guidelines for Qualifying Personnel as Abrasive
Blasters and Coating and Lining Applicators in the Rail
Industries
6A192/SSPC-TR 3, Dehumidification and Temperature Control During
Surface Preparation, Application, and Curing for Coatings/Linings
of Steel Tanks, Vessels, and Other Enclosed Spaces
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on the NACE Web site
RP0398-98, Recommendations for Training and Qualifying Personnel
as Railcar Coating and Lining Inspectors
Hazardous Materials Transport
(STGs 02, 03, 04, 06, 07, 08, 10, 35, 36, 40, 43, 45, 60, 61,
62, 63)
RP0302-2002, Selection and Application of a Coating System to
Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur
Service
-
16
Industry Sector
NACE Standards Technical Committee Reports
MR0174-2001, Recommendations for Selecting Inhibitors for Use as
Sucker-Rod Thread Lubricants
1C184, Monitoring Internal Corrosion in Oil and Gas Production
Operations with Hydrogen Probes (1995 Edition)
MR0175-2002, Sulfide Stress Cracking Resistant Metallic
Materials for Oilfield Equipment
1C187, Use of Galvanic Probe Corrosion Monitors in Oil and Gas
Drilling and Production Operations (1995 Edition)
MR0176-2000, Metallic Materials for Sucker-Rod Pumps for
Corrosive Oilfield Environments
1D177, Monitoring Techniques for the Control of Corrosion of
Drill Pipe, Casing, and Other Steel Components in Contact with
Drilling Fluids (1995 Edition)
RP0472-2000, Methods and Controls to Prevent In-Service
Environmental Cracking of Carbon Steel Weldments in Corrosive
Petroleum Refining Environments
1D182, Wheel Test Method Used for Evaluation of Film-Persistent
Inhibitors for Oilfield Application (1995 Edition)
RP0273-2001, Handling and Proper Usage of Inhibited Oilfield
Acids
1D199, Internal Corrosion Monitoring of Subsea Production and
Injection Systems
RP0475-98, Selection of Metallic Materials to Be Used in All
Phases of Water Handling for Injection into Oil-Bearing
Formations
1E100, Engineering Symbols Related to Cathodic Protection
RP0575-2001, Internal Cathodic Protection Systems in
Oil-Treating Vessels
1F192, Use of Corrosion-Resistant Alloys in Oilfield
Environments (2000 Edition)
RP0775-99, Preparation and Installation of Corrosion Coupons and
Interpretation of Test Data in Oilfield Operations
1F196, Survey of CRA Tubular Usage
RP0181-94, Liquid-Applied Internal Protective Coatings for
Oilfield Production Equipment
3A194, Oxygen Scavengers in Steam Generating Systems and in Oil
Production
RP0186-2001, Application of Cathodic Protection for Well
Casings
3T199, Techniques for Monitoring Corrosion and Related
Parameters in Field Applications
RP0191-2002, The Application of Internal Plastic Coatings for
Oilfield Tubular Goods and Accessories
34101, Refinery Injection and Process Mixing Points
RP0291-96, Care, Handling, and Installation of Internal Plastic
Coatings for Oilfield Tubular Goods and Accessories
Software: REFIN*COR 5.0
RP0491-96, Worksheet for the Selection of Oilfield Nonmetallic
Seal Systems
RP0192-98, Monitoring Corrosion in Oil and Gas Production with
Iron Counts
RP0195-2001, Recommended Practice for Corrosion Control of
Sucker Rods by Chemical Treatment
Oil and Gas Exploration and Production
(STGs 01, 03, 04, 05, 06, 07, 08, 10, 30, 31, 32, 33, 35, 37,
39, 45, 60, 61, 62, 63)
RP0296-2000, Guidelines for Detection, Repair, and Mitigation of
Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S
Environments
-
17
Industry Sector
NACE Standards Technical Committee Reports
TM0173-99, Methods for Determining Water Quality for Subsurface
Injection Using Membrane Filters
TM0177-96, Laboratory Testing of Metals for Resistance to
Sulfide Stress Cracking and Stress Corrosion Cracking in H2S
Environments
TM0183-2000, Evaluation of Internal Plastic Coatings for
Corrosion Control of Tubular Goods in an Aqueous Flowing
Environment
TM0284-96, Evaluation of Pipeline and Pressure Vessel Steels for
Resistance to Hydrogen-Induced Cracking
TM0384-2002, Holiday Detection of Internal Tubular Coatings of
Less than 250 m (10 mils) Dry Film Thickness
TM0185-2000, Evaluation of Internal Plastic Coatings for
Corrosion Control of Tubular Goods by Autoclave Testing
TM0186-2002, Holiday Detection of Internal Tubular Coatings of
250 to 760 m (10 to 30 mils) Dry Film Thickness
TM0187-98, Evaluating Elastomeric Materials in Sour Gas
Environments
TM0192-98, Evaluating Elastomeric Materials in Carbon Dioxide
Decompression Environments
TM0194-94, Field Monitoring of Bacterial Growth in Oilfield
Systems
TM0296-2002, Evaluating Elastomeric Materials in Sour Liquid
Environments
TM0297-2002, Effects of High-Temperature, High-Pressure Carbon
Dioxide Decompression on Elastomeric Materials
TM0397-2002, Screening Tests for Evaluating the Effectiveness of
Gypsum Scale Removers
TM0198-98, Slow Strain Rate Test Method for Screening
Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in
Sour Oilfield Service
TM0298-98, Evaluating the Compatibility of FRP Pipe and Tubulars
with Oilfield Environments
TM0299-99, Corrosion Control and Monitoring in Seawater
Injection Systemss
TM0399-99, Test Method for Phosphonate in Brine
-
18
Industry Sector
NACE Standards Technical Committee Reports
RP0692-97, Application of a Coating System to Exterior Surfaces
of Steel Rail Cars
6G194/SSPC-SP-TR 1, Thermal Precleaning
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
14C196, The Application of Solvent-Free Epoxy Coatings to
Railcars Using Plural-Component Spray Equipment
RP0295-95, Application of a Coating System to Interior Surfaces
of New and Used Rail Tank Cars
RP0495-95, Guidelines for Qualifying Personnel as Abrasive
Blasters and Coating and Lining Applicators in the Rail
Industries
Mining
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 33, 35, 39, 60, 61,
62, 63)
RP0398-98, Recommendations for Training and Qualifying Personnel
as Railcar Coating and Lining Inspectors
Industry Sector
NACE Standards Technical Committee Reports
RP0170-97, Protection of Austenitic Stainless Steels and Other
Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking
During Shutdown of Refinery Equipment
81172, Corrosion, Metallurgical, and Mechanical Experiences with
Petroleum Refinery Compressors (1993 Edition)
RP0472-2000, Methods and Controls to Prevent In-Service
Environmental Cracking of Carbon Steel Weldments in Corrosive
Petroleum Refining Environments
8X194, Materials and Fabrication Practices for New Pressure
Vessels to Be Used in Wet H2S Refinery Environments
RP0296-2000, Guidelines for Detection, Repair, and Mitigation of
Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S
Environments
8X294, Review of Published Literature on Wet H2S Cracking of
Steels Through 1989
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
34101, Refinery Injection and Process Mixing Points
MR0175-2002, Sulfide Stress Cracking Resistant Metallic
Materials for Oilfield Equipment
Software: REFIN*COR 5.0
TM0284-96, Evaluation of Pipeline and Pressure Vessel Steels for
Resistance to Hydrogen-Induced Cracking
RP0182-95, Initial Conditioning of Cooling Water Equipment
RP0189-2002, On-Line Monitoring of Cooling Waters RP0590-96,
Recommended Practice for Prevention, Detection, and Correction of
Deaerator Cracking
Petroleum Refining
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 30, 31, 32, 33, 34,
35, 37, 39, 60, 61, 62, 63)
RP0392-2001, Recovery and Repassivation After Low pH Excursions
in Open Recirculating Cooling Water Systems
-
19
Industry Sector
NACE Standards Technical Committee Reports
RP0300-2000, Pilot Scale Evaluation of Corrosion and Scale
Control Additives for Open Recirculating Cooling Water Systems
TM0286-2001, Cooling Water Test Unit Incorporating Heat Transfer
Surfaces
TM0199-99, Standard Test Method for Measuring Deposit Mass
Loading (Deposit Weight Density) Values for Boiler Tubes by the
Glass-Bead-Blasting Technique
Industry Sector NACE Standards Technical Committee Reports
RP0180-2001, Cathodic Protection of Pulp and Paper Mill Effluent
Clarifiers
5A171, Materials for Receiving, Handling, and Storing
Hydrofluoric Acid (2001 Revision)
RP0487-2000, Considerations in the Selection and Evaluation of
Rust Preventives and Vapor Corrosion Inhibitors for Interim
(Temporary) Corrosion Protection
5A192, Integrity of Equipment in Anhydrous Ammonia Storage and
Handling
RP0391-2001, Materials for the Handling and Storage of
Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient
Temperatures
5A195, State-of-the-Art Report on Controlled-Flow Laboratory
Corrosion Tests
RP0292-98, Installation of Thin Metallic Wallpaper Lining in Air
Pollution Control and Other Process Equipment
6A192/SSPC-TR 3, Dehumidification and Temperature Control During
Surface Preparation, Application, and Curing for Coatings/Linings
of Steel Tanks, Vessels, and Other Enclosed Spaces
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
7N197, Considerations for Water Reuse in Industrial Plants
RP0294-94, Design, Fabrication, and Inspection of Tanks for the
Storage of Concentrated Sulfuric Acid and Oleum at Ambient
Temperatures
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on the NACE Web site
RP0497-97, Field Corrosion Evaluation Using Metallic Test
Specimens
RP0199-99, Installation of Stainless Chromium-Nickel Steel and
Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air
Pollution Control Equipment
Chemical, Petrochemical, and Pharmaceutical
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 31, 32, 34, 35, 36,
37, 39, 45, 60, 61, 62, 63)
TM0169-2000, Laboratory Corrosion Testing of Metals
-
20
Industry Sector NACE Standards Technical Committee Reports
TM0193-2000, Laboratory Corrosion Testing of Metals in Static
Chemical Cleaning Solutions at Temperatures Below 93C (200F)
TM0196-96, Chemical Resistance of Polymeric Materials by
Periodic Evaluation
TM0398-98, Laboratory Corrosion Testing of Metals in Static
Chemical Cleaning Solutions at Temperatures Above 100C (212F)
TM0498-2002, Standard Test Method for Measuring the
Carburization of Alloys for Ethylene Cracking Furnace Tubes
RP0182-95, Initial Conditioning of Cooling Water Equipment
RP0189-2002, On-Line Monitoring of Cooling Waters RP0590-96,
Recommended Practice for Prevention, Detection, and Correction of
Deaerator Cracking
RP0392-2001, Recovery and Repassivation After Low pH Excursions
in Open Recirculating Cooling Water Systems
RP0300-2000, Pilot Scale Evaluation of Corrosion and Scale
Control Additives for Open Recirculating Cooling Water Systems
TM0286-2001, Cooling Water Test Unit Incorporating Heat Transfer
Surfaces
TM0199-99, Standard Test Method for Measuring Deposit Mass
Loading (Deposit Weight Density) Values for Boiler Tubes by the
Glass-Bead-Blasting Technique
-
21
Industry Sector
NACE Standards Technical Committee Reports
RP0180-2001, Cathodic Protection of Pulp and Paper Mill Effluent
Clarifiers
5H192, Inspection of Composite Tube Kraft Recovery Boilers for
Corrosion
RP0487-2000, Considerations in the Selection and Evaluation of
Rust Preventives and Vapor Corrosion Inhibitors for Interim
(Temporary) Corrosion Protection
7N197, Considerations for Water Reuse in Industrial Plants
RP0292-98, Installation of Thin Metallic Wallpaper Lining in Air
Pollution Control and Other Process Equipment
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on the NACE Web site
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
RP0497-97, Field Corrosion Evaluation Using Metallic Test
Specimens
RP0199-99, Installation of Stainless Chromium-Nickel Steel and
Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air
Pollution Control Equipment
Pulp and Paper
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 11, 35, 38, 39, 60,
61, 62, 63)
TM0169-2000, Laboratory Corrosion Testing of Metals
Industry Sector
NACE Standards Technical Committee Reports
Agricultural
(STGs 03, 04, 05, 07, 08, 10, 11, 35, 39, 60, 62, 63)
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
-
22
Industry Sector
NACE Standards Technical Committee Reports
RP0386-97, Application of a Coating System to Interior Surfaces
of Covered Hopper Rail Cars in Plastic, Food, and Chemical
Service
7N197, Considerations for Water Reuse in Industrial Plants
RP0487-2000, Considerations in the Selection and Evaluation of
Rust Preventives and Vapor Corrosion Inhibitors for Interim
(Temporary) Corrosion Protection
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on the NACE Web site
RP0497-97, Field Corrosion Evaluation Using Metallic Test
Specimens
Food Processing
(STGs 01, 02, 03, 04, 05, 06, 07, 08, 10, 11, 33, 35, 36, 37,
39, 46, 60, 61, 62, 63)
TM0169-2000, Laboratory Corrosion Testing of Metals
Industry Sector
NACE Standards Technical Committee Reports
RP0487-2000, Considerations in the Selection and Evaluation of
Rust Preventives and Vapor Corrosion Inhibitors for Interim
(Temporary) Corrosion Protection
42102, Corrosion in Power and Communication Manholes
RP0297-97, Maintenance Painting of Electrical Substation
Apparatus Including Flow Coating of Transformer Radiators
7N197, Considerations for Water Reuse in Industrial Plants
Electronics
(STGs 02, 04, 06, 07, 08, 10, 39, 40, 60, 62, 63)
TM0169-2000, Laboratory Corrosion Testing of Metals
-
23
Industry Sector
NACE Standards Technical Committee Reports
RP0487-2000, Considerations in the Selection and Evaluation of
Rust Preventives and Vapor Corrosion Inhibitors for Interim
(Temporary) Corrosion Protection
6A287, Electroless Nickel Coatings (1997 Edition)
RP0297-97, Maintenance Painting of Electrical Substation
Apparatus Including Flow Coating of Transformer Radiators
6A194, Surface Preparation Overview for Electroless Nickel
Coatings
TM0169-2000, Laboratory Corrosion Testing of Metals 6A294,
Quality Evaluation of Electroless Nickel Coatings NACE No.
1/SSPC-SP 5, White Metal Blast Cleaning 6A195, Introduction to
Thick-Film Polyurethanes NACE No. 2/SSPC-SP 10, Near-White Metal
Blast Cleaning 6A198, Introduction to Thick-Film Polyurethanes,
Polyureas,
and Blends NACE No. 3/SSPC-SP 6, Commercial Blast Cleaning
6H192, Conversion Coatings: A State-of-the-Art Report NACE No.
4/SSPC-SP 7, Brush-Off Blast Cleaning 6H194, Combatting Adhesion
Problems when Applying New to
Existing Finish Coats of Paint NACE No. 5/SSPC-SP 12, Surface
Preparation and Cleaning of Metals by Waterjetting Prior to
Recoating
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on the NACE Web site
NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete NACE VIS
7/SSPC VIS 4, Guide and Visual Reference Photographs for Steel
Cleaned by Waterjetting
NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning
Home Appliances
(STGs 02, 04, 06, 07, 08, 10, 39, 60, 62, 63)
NACE VIS 9/SSPC VIS 5, Guide and Reference Photographs for Steel
Surfaces Prepared by Wet Abrasive Blast Cleaning
Industry Sector
NACE Standards Technical Committee Reports
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
Defense
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 35, 39, 40, 42, 44, 45,
46, 60, 62, 63)
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
-
24
Industry Sector
NACE Standards Technical Committee Reports
RP0178-95, Fabrication Details, Surface Finish Requirements, and
Proper Design Considerations for Tanks and Vessels to Be Lined for
Immersion Service
6A192/SSPC-TR 3, Dehumidification and Temperature Control During
Surface Preparation, Application, and Curing for Coatings/Linings
of Steel Tanks, Vessels, and Other Enclosed Spaces (2000
Edition)
RP0892-2001, Coatings and Linings over Concrete for Chemical
Immersion and Containment Service
Online Database: CORSUR Corrosion Survey Database, housed on
knovel Scientific and Engineering Online References Web site;
accessible via NACE Store on the NACE Web site
RP0193-2001, External Cathodic Protection of On-Grade Carbon
Steel Storage Tank Bottoms
RP0198-98, The Control of Corrosion Under Thermal Insulation and
Fireproofing MaterialsA Systems Approach
Nuclear Waste Storage
(STGs 01, 02, 03, 04, 05, 07, 08, 10, 33, 35, 39, 41, 43, 44,
45, 46, 60, 62, 63)
NACE No. 10/SSPC-PA 6, Fiberglass-Reinforced Plastic (FRP)
Linings Applied to Bottoms of Carbon Steel Aboveground Storage
Tanks
ContentsHighway BridgesGas and Liquid Transmission
PipelinesWaterways and PortsHazardous Material
StorageAirportsRailroadsGas DistributionDrinking Water and Sewer
SystemsElectrical UtilitiesTelecommunicationsMotor
VehiclesShipsAircraftRailroad CarsHazardous Materials TransportOil
and Gas Exploration and ProductionMiningPetroleum RefiningChemical,
Petrochemical, and PharmaceuticalPulp and PaperAgriculturalFood
ProcessingElectronicsHome AppliciancesDefenseNuclear Waste
Storage
Continued: Continued on Next Page
Contents: Return to Contents