204.0 mm (8.1”) 183.0 mm (7.2”) 57.0 mm (2.2”) 180.0 mm (7.1”) 190.0 mm (7.5”) 169.0 mm (6.63”) 91.0 mm (3.6”) Dimensions Mounting Parts included 1. 1 x NAC™ -2 Autopilot Computer - IPX5 2. 1 x NAC™ -2 Power cable - 2 m 3. 1 x NAC™ -2 Drive cable - 2 m 4. 1 x NAC™ -2 Feedback cable - 2 m 5. 1 x NMEA 2000® Network cable - 0.6 m 6. 1 x Micro-C T-Joiner 7. 4 x Fixing screws 8. Warranty card & literature pack NAC ™ -2 INSTALLATION GUIDE For setup instructions, commissioning guide, product manuals, technical specifications, certificates and declarations, refer to the product website: www.simrad-yachting.com www.bandg.com Trademark ®Reg. U.S. Pat. & Tm. Off, and ™ common law marks. Visit www.navico.com/intellectual-property to review the global trademark rights for Navico Holding AS.” 1 2 3 4 5 6 7 *988-11144-002* System wiring example AUTOPILOT CONTROLLER 2 1 NMEA 2000® Backbone Micro-C Drop cable Micro-C Power cable Micro-C T-Joiners Micro-C Terminator, 120 Ohm Drive cable 1 T T MFD 12/24V DC 12/24V DC 12V DC NAC™ -2 COMPASS GPS SENSOR DRIVE UNIT RUDDER FEEDBACK 6 5 4 3 2 3 4 5 6 Power NMEA 2000® Backbone Micro-C Drop cable Rudder Drive cable IPX5