Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 1/09 N/en 9.1.020.01 ® ® Pneufit C PUSH-IN fittings Metric Ø 4 to 16 mm O/D tube Norgren Pneufit® C fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit® C offers a broad range of over 1,000 composite push-in pneumatic fittings to complement our established all brass Pneufit® series. Releasable stainless-steel grab-ring to grip nylon or polyurethane tube (85 or 95 durometer). Nickel plated brass components provide corrosion and contamination resistance and an extended life. Pre applied thread sealant on all taper threads and recessed captive O-ring on parallel threads provides optimum rapid sealing. Immediate quality sealing using silicone free U-packing. Technical data Medium: Compressed air Operating pressure: 750 mm Hg vacuum, up to 10 bar Ambient temperature: 0 to 60°C Consult our Technical Service for use below +2°C Tube sizes: 4, 6, 8, 10, 12, 16 mm Thread sizes: M5, M6, 1/8, 1/4, 3/8 and 1/2 ISO G, ISO Rc and ISO R Tubing: Nylon 11 or 12 Polyurethane 85, 95 or 98 durometer Materials Body: PBT Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated brass Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated brass Thread sealant: chemitech G-175L Ordering information see page 2 Warning: the Norgren Pneufit C range must not be used in vehicle air braking or ancillary systems. For push in fittings suitable for these applications, please refer to the Fleetfit range.
25
Embed
N en 9 1 020 PNEUFITC - IMI Precision Engineeringcdn.norgren.com/pdf/N_en_9_1_020_PNEUFIT_C.pdf · Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.1/09 N/en 9.1.020.01
®®Pneufit C
PUSH-IN fittings
Metric
Ø 4 to 16 mm O/D tube
Norgren Pneufit® C fittings are ready to use, offering fast assembly with no need for tools providing optimum flow.
Pneufit® C offers a broad range of over 1,000 composite push-in pneumatic fittings to complement our established all brass Pneufit®series.
Releasable stainless-steel grab-ring to grip nylon or polyurethane tube (85 or 95 durometer).
Nickel plated brass components provide corrosionand contamination resistance and an extended life.
Pre applied thread sealant on all taper threads andrecessed captive O-ring on parallel threads providesoptimum rapid sealing.
Immediate quality sealing using silicone free U-packing.
Technical dataMedium:Compressed airOperating pressure:750 mm Hg vacuum, up to 10 barAmbient temperature:0 to 60°CConsult our Technical Service for use below +2°C
Tube sizes:4, 6, 8, 10, 12, 16 mmThread sizes:M5, M6, 1/8, 1/4, 3/8 and 1/2ISO G, ISO Rc and ISO RTubing:Nylon 11 or 12Polyurethane 85, 95 or 98 durometer
Warning: the Norgren Pneufit C range must notbe used in vehicle air braking or ancillarysystems. For push in fittings suitable for theseapplications, please refer to the Fleetfit range.
1/09
®®
N/en 9.1.020.02
PNEUFIT C
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Method of assembly
Options selector C0˙˙˙˙˙˙˙
Thread size/tube size
Thread size/tube size
Type/thread form
Shape
1. Ensure that the end ofthe tube is cut square andis free from burrs.
2. Push the tube through therelease button and grab ringinto the fitting.
3. Push the tube firmly through the 'O' ring until itbottoms on the tube stop then pull back.
4. To disconnect, push the tube intothe fitting, hold down the releasebutton and withdraw the tube.
12
3
5
67
4
1. Impact resistant PBT body in black
2. Release buttons are red for metric, grey for inch
3. Stainless steel grab ring with special design to retain softer tube and provide easy releasability.
4. Silicon free U-packing provides leak tight tube seal under side loading.
5 Stem seal provides leak tight 360° swivel connection.
6 Nickel plated brass threads and notches on hex to signify NPT.
7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads.
T
ø K
ø A
ø X
Typical Dimensions
Ø A Ø K T Ø X4 10,5 15 9,56 12,5 16,5 128 14,5 18,5 1410 17,5 20 16,512 20,5 23 1916 27 23,5 25
Union tee Union tee Swivel tee adaptor Swivel tee adaptor Swivel side tee adaptor Stem tee Stem tee (equal) (unequal) C0167 C0267 C016C/C026C (equal) (unequal)C0060 C006A C0063 C0063
Page 12 Page 12 Page 12 Page 13 Page 13 Page 13 Page 13Stem side tee Stem side tee Swivel tee adaptor Swivel tee adaptor
(equal) (unequal) C0168 C0268C0064 C0064
Page 15 Page 13 Page 14 Page 14
Union Y Swivel Y adaptor Swivel Y adaptor Stem Y equal C0188 C0288 (equal + unequal)C0082 C0084
Page 11 Page 11 Page 11 Page 11Quadruple stem reducer Quadruple Y union Quadruple Y union Quadruple reducerC0096 C0195 C0295 C0097
Page 7 Page 7 Page 7 Page 7 Page 8 Page 8 Page 8Stem expander Bulkhead union Straight adaptor Stem union Stem union Plug Cap C0023 C0029 (female bulkhead) (equal) (unequal) C0004 (female plug)
C0232 C0022 C0022 C0012
Page 8 Page 8 Page 8 Page 8 Page 9 Page 9 Page 9
N/en 9.1.020.03
®®PNEUFIT C
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Straight adaptors and connectors
Elbow connectors and adaptors
Tee connectors and adaptors
Y and quadruple connectors
Hand valve Hand valve Hand valve Hand valveCO1GG CO1GH CO1GJ CO1GF
Banjo flow control Banjo flow control Banjo flow control Shrouded banjo Shrouded banjo Banjo flow control(out) (out) (in) (out) (out) (in)C0TA0 COK51 COSAO COTBO COKBO COL51
Page 21 Page 21 Page 21 Page 21 Page 22 Page 22Swivel speed control Swivel speed control Swivel speed control Swivel speed control In-line flow controlCOT56 COK56 and pilot check and pilot check COOGE
CO1GN CO2GN
Page 22 Page 22 Page 23 Page 23 Page 23
Union cross Manifold union Male manifold Stem manifoldC0090 C00D3 C01D3 C00J3
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Cross and manifolds
Banjo flow controler
Self sealing adaptors
Hand valves
N/en 9.1.020.05
®®PNEUFIT C
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Speed controllers flowrate for C0K51, C0TA0,C0L51, C0K56, C0T56 and C0SA0 banjo types
Speed controllers flowrate for C00GE
160
120
80
40
8
876543210
7531
87654321
150
100
50
0
400
300
200
100
0 1 2 3 4 5 6 7 8 9 10
87
5
31
300400500
200100
876543210
04-01
800
600
400
200
0 1 2 3 4 5 6 7 8 9 10 1112
875311
600800
1000
400200
876543210
06-02, 04-02
1400
1000
800
600
0 1 3 5 7 9 11 13 15
875
3
1
1000
1400
600
200
876543210
2000
1500
1000
500
0 1 3 5 7 9 11 13
87531
100015002000
500
876543210
140
100
60
20
0 1 2 3 4 5 6 7 8 9 10
87531
75100125
5025
876543210
250200150
50100
0 1 2 3 4 5 6 7 8 9 10
8753
1
300400500
200100
876543210
250
350
150
50
0 1 2 3 4 5 6 7 8 9 10
87531
600800
1000
400200
876543210
700
500
300
100
0 1 2 3 4 5 6 7 8 9 10
87531
600800
400200
876543210
1000
600
200
0 1 2 3 4 5 6 7 8 9 10
87531
500750
1000
250
876543210
Control flow
Flow
rat
e (l/
min
)Fl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)Fl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)
Flow
rat
e (l/
min
)Fl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)Fl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)Pr
essu
re (b
ar)
Pres
sure
(bar
)Pr
essu
re (b
ar)
Pres
sure
(bar
)Pr
essu
re (b
ar)
3, 4 and 6 mmM5
C00GE0400
C00GE0600
C00GE0800
C00GE1000
C00GE1200
4, 6 and 8 mm1/8
4, 6, 8, 10 and 12 mm1/4
6, 8, 10 and 12 mm3/8
8, 10 and 12 mm1/2
Free flow Control flow Free flow
Needle turn Pressure (bar)
Flow
rat
e (l/
min
)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flowFl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flow
Flow
rat
e (l/
min
)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flow
Flow
rat
e (l/
min
)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flow
Flow
rat
e (l/
min
)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flow
Needle turn Pressure (bar)
Control flow Free flow
Needle turn Pressure (bar)
Control flow Free flow
Needle turn Pressure (bar)
Control flow Free flow
Needle turn Pressure (bar)
1/09
®®
N/en 9.1.020.06
PNEUFIT C
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Speed controllers flowrate for C01GN and C02GN banjo types
0
100
200
400
400
1 2 3 4 5 6 7 8 9 10
531
304050
2010
876543210
0
100
200
400
400
1 2 3 4 5 6 7 8 9 10
5
3
1
456075
3015
876543210
0
200
400
600
800
1 2 3 4 5 6 7 8 9 10
5
3
1
75100125
5025
876543210
0
200400600
1000800
1 2 3 4 5 6 7 8 9 1110
5
3
1
120150180
8040
876543210
Control flow
Flow
rat
e (l/
min
)Fl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)Fl
ow r
ate
(l/m
in)
Pres
sure
(bar
)Pr
essu
re (b
ar)
6 and 8 mm1/8
8, 10 and 12 mm3/8
10 and 12 mm1/2
6 and 8 mm1/4
Free flow Control flow Free flow
Needle turn Pressure (bar)
Flow
rat
e (l/
min
)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flowFl
ow r
ate
(l/m
in)
Flow
rat
e (l/
min
)
Pres
sure
(bar
)
Needle turn Pressure (bar)
Control flow Free flow
Needle turn Pressure (bar)
N/en 9.1.020.07
®®PNEUFIT C
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Bulkhead union elbowØ A B C E F G P4 M12x1 32,5 18,5 5,5 9 4 14 C004904006 M14x1 38 20,5 6 11 4 17 C004906008 M16x1 40,5 23 6,5 11,5 5 19 C0049080010 M20x1 42,5 23,5 7 12 5 24 C0049100012 M22x1 48 27,5 7,5 15 5 26 C00491200
Model
N/en 9.2.020.11
®®PNEUFIT C
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
No air flow when tubing is removed - air flow is restored when tubing is inserted
®®PNEUFIT C
1/09 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/en 5.3.541.25
C01GGC
E
ø 4,3
NB
C 1
G
ø O1
O
1
3/2 Shut-off valves B C C1 E G N O O1R1/8 71 40,5 19 8 18,5 18 16,5 14 C01GG1818R1/4 77 40,5 19 10 18,5 18 16,5 14 C01GG2828R3/8 81 41 24 11 21,5 21 19,5 17 C01GG3838R1/2 90 41 24 14 21,5 21 19,5 21 C01GG4848
WarningThese products are intended for use in industrial compressed airsystems only. Do not use these products where pressures andtemperatures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or otherapplications not within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provideadequate safeguards to prevent personal injury or damage toequipment in the event of such failure.System designers must provide a warning to end users in the system instructional manual if protection against a failuremode cannot be adequately provided.System designers and end users are cautioned to review specificwarnings found in instruction sheets packed and shipped with these products.