SiA533EDJ www.vishay.com Vishay Siliconix S10-0214-Rev. A, 25-Jan-10 1 Document Number: 65706 For technical questions, contact: [email protected]THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 N- and P-Channel 12 V (D-S) MOSFET Marking code: EH FEATURES • TrenchFET ® power MOSFETs • Typical ESD protection: n-channel 1500 V, p-channel 1000 V • 100 % R g tested • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Load switch for portable devices • DC/DC converters PRODUCT SUMMARY N-CHANNEL P-CHANNEL V DS (V) 12 -12 R DS(on) () at V GS = ± 4.5 V 0.034 0.059 R DS(on) () at V GS = ± 2.5 V 0.040 0.081 R DS(on) () at V GS = ± 1.8 V 0.050 0.115 R DS(on) () at V GS = ± 1.5 V 0.070 0.215 Q g typ. (nC) 5.6 7.8 I D (A) a 4.5 -4.5 Configuration N- and p-pair PowerPAK ® SC-70-6L Dual Top View 2.05 mm 2.05 mm 1 2 05 mm 2.05 mm 1 Bottom View 3 D 2 2 G 1 1 S 1 D 1 D 2 S 2 4 G 2 5 D 1 6 P-Channel MOSFET N-Channel MOSFET D 2 S 2 G 2 S 1 D 1 G 1 ORDERING INFORMATION Package PowerPAK SC-70 Lead (Pb)-free and halogen-free SiA533EDJ-T1-GE3 ABSOLUTE MAXIMUM RATINGS (T A = 25 °C, unless otherwise noted) PARAMETER SYMBOL N-CHANNEL P-CHANNEL UNIT Drain-source voltage V DS 12 -12 V Gate-source voltage V GS ± 8 ± 8 Continuous drain current (T J = 150 °C) T C = 25 °C I D 4.5 a -4.5 a A T C = 70 °C 4.5 a -4.5 a T A = 25 °C 4.5 a, b, c -4.5 a, b, c T A = 70 °C 4.5 a, b, c -3.7 b ,c Pulsed drain current I DM 20 -15 Source-drain current diode current T C = 25 °C I S 4.5 a -4.5 a T A = 25 °C 1.6 b, c -1.6 b, c Maximum power dissipation T C = 25 °C P D 7.8 7.8 W T C = 70 °C 5 5 T A = 25 °C 1.9 b, c 1.9 b, c T A = 70 °C 1.2 b, c 1.2 b, c Operating junction and storage temperature range T J , T stg -55 to +150 °C Soldering recommendations (peak temperature) d, e 260
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
N- and P-Channel 12 V (D-S) MOSFET
Marking code: EH
FEATURES• TrenchFET® power MOSFETs
• Typical ESD protection:n-channel 1500 V, p-channel 1000 V
• 100 % Rg tested
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS• Load switch for portable devices
• DC/DC converters
PRODUCT SUMMARYN-CHANNEL P-CHANNEL
VDS (V) 12 -12
RDS(on) () at VGS = ± 4.5 V 0.034 0.059
RDS(on) () at VGS = ± 2.5 V 0.040 0.081
RDS(on) () at VGS = ± 1.8 V 0.050 0.115
RDS(on) () at VGS = ± 1.5 V 0.070 0.215
Qg typ. (nC) 5.6 7.8
ID (A) a 4.5 -4.5
Configuration N- and p-pair
PowerPAK® SC-70-6L Dual
Top View2.05 mm
2.05 mm
12 052 05 mm
2.05 mm
11
Bottom View
3D2
2G1
1S1
D1
D2
S2
4
G2
5
D1
6
P-Channel MOSFETN-Channel MOSFET
D2
S2
G2
S1
D1
G1
ORDERING INFORMATIONPackage PowerPAK SC-70
Lead (Pb)-free and halogen-free SiA533EDJ-T1-GE3
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)PARAMETER SYMBOL N-CHANNEL P-CHANNEL UNIT
Drain-source voltage VDS 12 -12V
Gate-source voltage VGS ± 8 ± 8
Continuous drain current (TJ = 150 °C)
TC = 25 °C
ID
4.5 a -4.5 a
A
TC = 70 °C 4.5 a -4.5 a
TA = 25 °C 4.5 a, b, c -4.5 a, b, c
TA = 70 °C 4.5 a, b, c -3.7 b ,c
Pulsed drain current IDM 20 -15
Source-drain current diode currentTC = 25 °C
IS4.5 a -4.5 a
TA = 25 °C 1.6 b, c -1.6 b, c
Maximum power dissipation
TC = 25 °C
PD
7.8 7.8
WTC = 70 °C 5 5
TA = 25 °C 1.9 b, c 1.9 b, c
TA = 70 °C 1.2 b, c 1.2 b, c
Operating junction and storage temperature range TJ, Tstg -55 to +150°C
Soldering recommendations (peak temperature) d, e 260
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notesa. Package limitedb. Surface mounted on 1" x 1" FR4 boardc. t = 5 sd. See solder profile (www.vishay.com/doc?73257). The PowerPAK SC-70 is a leadless package. The end of the lead terminal is exposed
copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection
e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless componentsf. Maximum under steady state conditions is 110 °C/W
THERMAL RESISTANCE RATINGS
PARAMETER SYMBOL N-CHANNEL P-CHANNEL
UNIT TYP. MAX. TYP. MAX.
Maximum junction-to-ambient b, f t 5 s RthJA 52 65 52 65°C/W
Maximum junction-to-case (drain) Steady state RthJC 12.5 16 12.5 16
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Static
Drain-source breakdown voltage VDSVGS = 0 V, ID = 250 μA N-Ch 12 - -
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notesa. Guaranteed by design, not subject to production testingb. Pulse test; pulse width 300 μs, duty cycle 2 %Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
N-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
N-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
N-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Safe Operating Area, Junction-to-Ambient
Current Derating a Power Derating
Notea. The power dissipation PD is based on TJ max. = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit
VDS - Drain-to-Source Voltage (V)* VGS > minimum VGS at which RDS(on) is specified
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
N-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Safe Operating Area, Junction-to-Ambient
Current Derating a Power Derating
Notea. The power dissipation PD is based on TJ max. = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit
100
1
0.1 1 10 1000.01
10
0.1 TA = 25 °CSingle Pulse
100 ms
Limited by RDS(on)*
BVDSS Limited
1 ms
100 µs
10 ms
1 s, 10 s
DC
VDS - Drain-to-Source Voltage (V)* VGS > minimum VGS at which RDS(on) is specified
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-CHANNEL TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65706.
Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.