Curriculum Vitae Ing. Abdurahman Ahmed December 2015 Project selection in the Netherlands Residential building with basement car park Escamp Carré, Hague, Netherlands 2008 - 2011 Tasks: Project engineer, design of concrete structure and foundation pile caps. Structure: concrete walls and floor slab, concrete column in basement car park. Masonry outer leaf Refurb. GAK office building Amsterdam 2015 - 2015 Task: Project engineer, visibility study, check of foundation reserve capacity. Structure: concrete structure, Office building will be changed to student apartment, new void in floor, new façade, roof extension Starting date career at ABT: 1 October 2000 End date career at ABT: 1 September 2015 Telefoon: … E-mail address: [email protected]Experience and expertise Started in October 2000 as a structural technician at ABT consulting, I have worked in many different projects using all main construction materials in all project stages. I have used AutoCAD and later I have been one of the first Revit users (2006). From years 2008, I have gained enough knowledge to start structural design calculation in RC, steel, masonry. I have been doing a lots of refurbishment projects. In the following pages, I summarised the main projects I have worked on in my 15 years ABT career in the Netherlands. I am happy to share this with you. Abdurahman Ahmed Structural engineer and technician
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Curriculum Vitae
Ing. Abdurahman Ahmed
December 2015
Project selection in the Netherlands Residential building with basement car park Escamp Carré, Hague, Netherlands
2008 - 2011 Tasks: Project engineer, design of concrete structure and foundation pile caps. Structure: concrete walls and floor slab, concrete column in basement car park. Masonry outer leaf
Refurb. GAK office building Amsterdam
2015 - 2015
Task: Project engineer, visibility study, check of foundation reserve capacity. Structure: concrete structure, Office building will be changed to student apartment, new void in floor, new façade, roof extension
Starting date career at ABT: 1 October 2000 End date career at ABT: 1 September 2015 Telefoon: … E-mail address: [email protected]
Experience and expertise Started in October 2000 as a structural technician at ABT consulting, I have worked in many different projects using all main
construction materials in all project stages. I have used AutoCAD and later I have been one of the first Revit users (2006). From years 2008, I have gained enough knowledge to start structural design calculation in RC, steel, masonry. I have been doing a lots
of refurbishment projects. In the following pages, I summarised the main
projects I have worked on in my 15 years ABT career in the Netherlands. I am happy to share this with you.
Total Engineering Refurb. Building B, EUR (Erasmus University Rotterdam Library) 2014 – 2017 Task: Project Engineer, visibility study, check of existing concrete floor with new voids
Structure: concrete structure, refurbishment of existing library with plant roof extension
Sport campus Zuiderpark Hague, Netherlands
2014 - 2016 Task: Engineer: Design of concrete foundation and ground floor slab Structure: steel structure: roof trusses, steel columns, beams with hollow core floor slab.
Walkway and Storage for bicycles at Utrecht central Station 2014 - 2015 Task: Revit modelling and detailing
Structure: Steel structure with composite floor slab
Design of new Tram Remise (NTR) Nieuwegein 2014 - 2015 Task: check of the existing office building with glulam roof beams and steel columns. Structure: Steel Structure Remise with office building.
Refurb of Plantage Muidergracht 6A Amsterdam (residential)
2013 - 2015 Task: Design and draughting of partly existing basement will be extended under the whole house, concrete retaining wall and slab has to be water proof. House is next to one of many canals in Amsterdam
Structure:
The Structure has masonry walls, timber floors, timber piles.
Refurbishment of nursing/ retirement home Slotervaart Amsterdam 2013 - 2015 Task: Technician Making Structural Cad drawings Structure: concrete floor and steel columns, beams
Curriculum Vitae
Ing. Abdurahman Ahmed
December 2015
General Hospital of Alkmaar (MCA) 2011 - 2015 Task: design of steel structure, stability, foundation design and reinforcement in Tender stage. Structure: Steel column, beam with hollow
core floor slabs with 14 meter span length.
PPS National Military Museum
Soesterberg 2011 - 2015 Task: design of foundation reinforcement (pad foundation) Structure: Steel 3D roof trusses and steel
columns.
Extension and Refurb of ENB (eerste Nederlandse Buitenschool)school, Hague 2011 - 2014 Task: design of steel structure, ground floor slab and foundation. Structure: steel structure, masonry outer
Educative centre and community house, Assen 2010 - 2012 Task: making Structural drawing and design
Refurbishment of council house Vlaardingen 2009 - 2014
Task: Scheck existing structure, new void in floor slabs, roof plan extension, new entrance with glulam tapered columns, new outer leaf Structure: concrete
Residential building Centrumplan Bergschenhoek 2e fase
2009 - 2013
Task: design of RC walls and floor slabs, reinforced pile caps, retaining car park basement walls, ground floor slab. Structure: concrete structure, masonry outer leaf.
Refurbishment/ extension of Campus University Leiden Casuaristraat, Hague 2009 - 2012 Task: design of steel structure with MD composite floor. check of the existing masonry basement with the new loads, stability calculation.
Structure: only the existing masonry facades of the entire building remains. Totally new steel structure with Comflor composite floor.
Delft Central station with office buildings, Delft 2008 - 2015 Task: calculation of a storey height steel trusses at tender stage.
Structure: steel structure
Residential building Moerwijk-Oost, Hague 2008 - 2013 Task: design of RC walls and floors, pile cap foundation, stability check.
Curriculum Vitae
Ing. Abdurahman Ahmed
December 2015
Albert Heijn shopping Mall with 2 levels of roof Car park, Berenbroekstraat, Delft 2008 - 2011 Task: design of steel floor beams with RC columns, RC foundation, stability check,
coordination with other consultants, Revit Structural drawings.
Refurbishment of De Zonnetrap Retirement home, Rotterdam 2008 - 2010 Task: check of existing RC floor slab with new
voids, masonry support structures, check of existing foundation
Cultureel Centrum Eemplein, Amersfoort
2007 - 2013 Task: Making structural drawings, liaison with other consultants like architect
Dutch world expo 2010 Shanghai 2007 - 2010 Task: Revit modelling Structure: Steel structure forming a walkway in the shape of 8 (Chinese lucky number)
Villa family Eelman, Wassenaar
2007 - 2009 Task: structural drawings
Refurbishment of Buger King Lijnbaan 52
Rotterdam 2007 - 2008 Task: check of existing floor slab with new voids, design of Hilti connection, check loads on existing foundation.
Curriculum Vitae
Ing. Abdurahman Ahmed
December 2015
Residential building Nieuwe Sloot deelwijk Park, Alphen a/d Rijn (C) 2006 - 2014 Task: making structural CAD drawings
Villa Industria te Hilversum (C) 2006 - 2013 Task: making structural CAD drawings
EYE Film Instituut Amsterdam (C) 2006 - 2012
Task: RC foundation and ground floor slab
'Da Nang International Airport' (Vietnam) . 2006 - 2010 Task: making structural CAD drawings