My Bachelor project slides

COLOR MIXER

Bachelor projectMechatronics DepartmentMohamed Saad Aly

20000623

SupervisorDr. Khalil Abd El Salam

Presents toDr.Ahemd Helmy

Eng: Ehab

Higher Technological Institute10th of Ramadan City

Aim & Objective. Introduction. Mechatronics System. Mechanical Design. Control. Components. Visual Basic Interface. Problems. Conclusion.

Agenda

Aim To construct a machine that is able to make the same

task of the best known machines in the market with low cost and high quality.

Objectives Minimizing the total cost. Improving the characteristics of the best know

machine in the market. Have a widely products.

Aim & Objectives

What is color mixing ?Mixing procedure and output.

Introduction

Mechatronics System

Closed Loop System

Mechanical Design

Mixing Station

Discrete ControlBasic Stamp II

Electronic Components: Webcam. Microcontroller. Diodes. Serial to USB converter.

Electromechanical Components: Relays. Solenoid Valves.

Components

Visual Basic Interface Fast, Smart & Accurate

Actually RGB analysis provide great feedback, but I have one little problem that in some cases this correction exceeding the containers range so I thought it was enough to display the difference on the screen without activating the machine.

Problems

Machines with Graphical User Interface (GUI) is the state of the art. This machines can be operated by employee with very limited knowledge and experience which will reduce the cost of manpower. In the same time this machines can be operated remotely through network connection and it can store all its information in simple database.

Conclusion

MECHATRONICS DEPARTMENT9 SEP 2012

THANK YOU