MULTIFIVE G2 - eaglelighting.com.au · technology to provide light output ratios (LOR) of 92% whilst meeting AS1680 luminance requirements, Multifive G2 also achieves European EN12464-1

MULTIFIVE G2 |

A high efficiency luminaire designed for BCA & Greenstar applications

TABLE OF CONTENTS

Multifive G2 | Datasheet 3

Features & Benefits 4

r5-louvre Technology 5

Meeting BCA & Greenstar Requirements 6

Customer Support 7

Without doubt, the Multifive G2 is one of Eagle Lighting Australia’s best luminaires, especially when your needs are for a lighting solution that achieves tough BCA & Greenstar requirements.

Simply, the Multifive is a market-leading fixture when it comes to lighting efficiencies, louvre and reflector technology, and lifecycle cost analysis.

This brochure will introduce the Multifive G2, its features & benefits, some technical information and illustrate ELA’s commitment to Our People, Our Product and Our Planet.

MULTIFIVE G2© Eagle Lighting Australia 2012 All rights reserved.

DISCLAIMER:

Whilst every effort has been made to ensure the accuracy of the information in this publication, ELA assumes no responsibility for errors, omissions or typographical errors.

All goods supplied by Eagle Lighting Australia are subject to our general terms and conditions.

For further information on any of the products featured in this catalogue, please contact your local ELA Representative.

IMAGES | COVER, ABOVE & RIGHT:

Macquarie Bank Headquarters 1 Shelley Street, King Street Wharf, Sydney, NSW

INTRODUCTION

3 x 14W, EXPOSED T-BAR2 x 14W,28W, EXPOSED T-BAR

TECHNICAL INFORMATION

MULTIFIVE G2High efficiency luminaire designed for BCA and Greenstar applications

PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS

A B C CUTOUT

MULTIFIVE G2 EXPOSED T-BAR

EL-25480-114-101-___ 1 x 14W T5 600 300 75

EL-25482-214-100-___ 2 x 14W T5 600 300 75

EL-25483-314-100-___ 3 x 14W T5 600 600 75

EL-25484-414-100-___ 4 x 14W T5 600 600 75

EL-25485-128-100-___ 1 x 28W T5 1200 150 75

EL-25485-128-101-___ 1 x 28W T5 1200 300 75

EL-25487-228-100-___ 2 x 28W T5 1200 300 75

EL-25488-135-102-___ 1 x 35W T5 1500 300 75

MULTIFIVE G2 PLASTER RECESSED

EL-25480-114-105-___ 1 x 14W T5 650 300 75 615 155

EL-25482-214-102-___ 2 x 14W T5 650 300 75 615 275

EL-25485-128-103-___ 1 x 28W T5 1250 300 75 1225 155

EL-25487-228-102-___ 2 x 28W T5 1250 300 75 1225 275

EL-25488-135-103-___ 1 x 35W T5 1550 300 75 1525 155

MULTIFIVE G2 SURFACE MOUNTED

EL-25485-128-104-___ 1 x 28W T5 Single Cell 1200 150 75

EL-25487-228-104-___ 2 x 28W T5 Twin Cell 1200 270 75

EL-25486-228-105-___ 2 x 28W T5 Single Cell 1200 150 75

EL-25488-135-104-___ 1 x 35W T5 Single Cell 1500 150 75

Eagle Lighting Australias range of Multifive G2 luminaires utilises Fagerhult’s Beta r5-louvre technology to provide light output ratios (LOR) of 92% whilst meeting AS1680 luminance requirements, Multifive G2 also achieves European EN12464-1 visual comfort guidelines.

The R5 Beta louvre features double parabolic cross blades with a reflector made of special satin-matt material providing a high LOR and excellent visual comfort.

Where BCA and Greenstar requirements dictate high efficiency and low power density, the Multifive G2 is the perfect solution. The Multifive features in a number of new and significant Australian projects including the BHP Billiton Towers (Perth), 123 Albert St (Brisbane), the Gateway Building and the Macquarie Bank Headquarters (Sydney).

OPTIONS:

+ Supply/return air variation available, single or double boots as required.

+ Exposed T-Bar, Surface Mounting or Plaster Recessed.

+ DSI or DALI dimming.

+ Seismic Restraint

C

B

A

325

650

976

1301

1

MU

LTIF

IVE

G2

MULTIFIVE G2 1X28W | LOR 92%

N18226 REVIT IES AGi32

VARIATION SUFFIX

Standard -000

DSI/STD terminal block -100

DALI/STD terminal block -200

1-10V/STD terminal block -300

Standard/Fused terminal block -400

DSI/Fused terminal block -500

DALI/Fused terminal block -600

1-10V/Fused terminal block -700

All photometric, spectrometric and electrical data have a tolerance of ±10%.

+ The Multifive is constructed from sheet steel, manufactured and assembled at Eagle Lighting Australias facility in Melbourne.

+ The optical system of the Multifive incorporated with Fagerhult’s unique r5-louvre delivers a wide light distribution, outstanding photometric performance and good uniformity in all areas where the luminaire is used, and at an economical cost.

+ The Multifive body has been designed to house the specialised construction of the r5-louvre, the result being zero light leak compared to a typical louvre.

+ Suitable for exposed T-bar or plasterboard ceilings, the shallow depth of the Multifive is less likely to clash with other mechanical services within the ceiling space.

+ Within the 300 and 600mm housings, single or twin integrated louvres may be incorporated. This provides an architectural statement and provides individuality within the interior.

+ The 150mm wide fixture is available in symmetrical and asymmetrical beam distributions to provide a flexible lighting solution within the interior.

+ Control gear for the Multifive G2 is available in standard HF, DSI and DALI protocol, to provide aesthetic and functional lighting within all interior areas where the luminaire is used.

+ To maximise the operating life, Control gear is mounted outboard of luminaire optical system to reduce temperatures around the componentry.

+ The Multifive is available in a wide range of configurations to suit almost any installation requirements. Where an existing configuration doesn’t suit, if possible, Eagle Lighting Australia will engineer a customised solution.

FEATURES & BENEFITS

ECO-SEAL PAINT FINISH

The Multifive is finished in a seamless and fully-automated powdercoating process, where the raw luminaire components are degreased and treated, dried, coated and baked before being prepared for assembly.

Incorporated into the water-based, degreasing cycle is an eco-seal application. Through a three-stage procedure, two parts of eco-seal are combined to give all of our luminaires an additional rust-inhibiting seal.

Eco-sealing is essential as we are rustproofing the entire luminaire including all its raw edges. We see this as value-added benefit to the end-user when you begin to compare the quality of our fittings and pricing with competitors.

IMAGE: Brookfield Place Tower, Perth, WA

r5-louvre standard louvre

REFLECTOR AND LOUVRE MATERIAL

The reflectors and active louvres in the Multifive range are designed for maximum efficiency and controlled light distribution. This makes it possible to plan lighting for energy efficient solutions.

A significant factor in obtaining a high level of efficiency in any luminaire is the choice of reflector and louvre material. In the Multifive we make use of Fagerhult’s r5-louvre, constructed from Alanod’s Miro® anodised aluminium.

MIRO® is proven to have excellent properties as a reflectivity enhancing material. The carefully co-ordinated layers are produced in a high vacuum increasing their total reflectivity to 95% compared to conventional anodised versions. The result is a luminaire with increased efficiency of 10% to 30% over a similar luminaire using standard anodised material.

r5-LOUVRE

Fagerhult’s double parabolic r5-louvre has been developed specifically for the T5-fluorescent lamps to give the best effectiveness with regard to light distribution and efficiency. High efficiency is directly linked to energy efficiency.

The r5-louvre consists of a double parabolic louvre and a top reflector, which maximises the optical efficiency and controls the luminance in all directions around the luminaire.

The r5-louvre has the following advantages:

+ a reduction in the thickness of the cross-blades means that the light opening’s area has been enlarged by approximately 4%.

+ Sealing the top of the cross-blades minimises light losses.

+ The curved tops of the cross-blades eliminate unwanted reflections on the side reflector and gives good mechanical cut off in all directions.

+ Metallised aluminium.

+ Fixed top reflector of specular metallised aluminium.

r5-LOUVRE TECHNOLOGY

The r5-louvre effectively guides out the light even from the back of the fluorescent lamp.

Rigid side construction enables easy removal of the louvre for maintenance. This also ensures that the louvre doesn’t sag or distort over time.

Thin cross blades give larger light openings and increase efficiency.

No reflections from the top of the cross blades are visible in the side reflectors.

Sealed top eliminates light loss.

Advantages: • Reflection factor up to 95%. • Reflection factor 10-30% better than anodised aluminium.• Better controlled beam path.• Total lack of colour shifting on surfaces.• Reduction in unwanted diffused beam path. • The manufacturing process impacts less on the environment

than anodising.

Aluminium of commercial standard

Reflection enhancing oxide covering

Adhesive layer

99.99 % pure aluminium

REFLECTOR TECHNOLOGY

MEETING BCA & GREENSTAR REQUIREMENTS

123 ALBERT STREET, BRISBANE

123 Albert St was built with the aim of being the first premium-grade, 6-star Green Star office high rise in Brisbane. This impressive addition to the city skyline, was designed to deliver the highest levels of energy efficiency, attractive to any tenants looking for long-term cost effectiveness in any future business.

Through attention to detail and the use of the highest quality materials and advanced technologies, the seamless design of 123 Albert Street is viewed as a supreme working environment.

Eagle Lighting Australia proudly supplied over 2500 Multifive luminaires across 26 levels of office space, eight levels of car parking and ground floor reception area.

Where BCA and Greenstar requirements dictate high efficiency and low power density, the Multifive G2 is the perfect solution. On 2.4m x 2.7m spacings, Multifive achieves the following:

+ Light Power Density of 4.63W/m2

+ Maintenance Factor of 0.8mf

+ 329 lux at 77% uniformity

+ Glare Index rating of 19

+ Greenstar result of 1.40W/m2/100 lux

Available in a range of lamp wattages and louvre configurations, the Multifive provides total flexibility and architectural solutions within the interior space.

The availability of the following widths, 150, 200, 300 and 600mm, makes this fitting suitable for most ceiling tile types and configuration.

AGI32 LIGHTING CALCULATION 0% points over 400 lux

2.7M

2.4M

MultiFive Basic Beta 1x28w 2.4m x 2.7m APPROXIMATE W/m2 = 4.63

Height of Room: 2.7m Work Plane: 0.72m Reflection Properties: 80 / 50 / 20

Maximum Glare Rating: 19BCA: 4.63Article No: 25485Luminaire Luminious Flux: 2600 lmSystem Luminaire Wattage: 30wSize: 1200 x 150

16.2M

12M

W/m2/100lux = 1.40

255 268 280 297 310 282 278 279 285 315 291 282 279 284 307 307 284 279 282 291 316 286 279 278 282 310 297 280 268 255

288 303 316 334 348 317 313 314 320 355 326 318 314 319 344 344 319 314 318 326 355 320 314 312 317 348 334 316 303 289

288 301 317 337 350 320 311 313 324 355 330 317 312 320 346 346 320 311 317 330 355 324 313 311 320 350 337 317 301 289

277 288 307 333 344 312 297 300 318 348 326 305 298 311 341 341 311 297 305 326 348 318 300 297 312 344 333 307 288 278

286 298 316 343 357 327 314 316 333 363 341 321 314 327 356 355 327 314 321 341 364 333 317 314 327 357 343 316 298 286

306 321 337 360 379 350 344 347 355 390 362 351 346 353 379 380 353 346 351 362 390 355 347 344 350 379 360 337 321 306

313 328 344 366 384 353 347 350 357 395 364 354 349 356 383 383 356 349 354 364 395 357 350 347 353 384 366 344 328 313

297 310 328 351 365 336 325 328 341 371 347 332 326 336 362 362 336 326 332 347 371 341 328 325 336 365 351 328 310 297

283 293 313 339 351 317 299 303 325 356 333 308 300 315 348 348 315 299 308 333 356 324 303 299 317 351 339 313 293 283

292 305 323 348 360 331 319 322 336 365 342 326 320 331 357 357 331 320 326 342 365 336 322 319 331 360 347 323 305 293

310 325 341 364 382 352 347 349 356 392 363 353 349 355 381 381 355 349 353 363 392 356 349 347 352 382 364 341 325 310

310 325 341 364 382 352 347 349 356 392 363 353 349 355 381 381 355 349 353 363 393 356 349 347 352 382 364 341 325 310

293 305 323 348 360 331 319 322 336 365 342 326 320 331 357 358 331 320 326 342 365 336 322 319 331 360 347 323 305 293

283 293 313 339 351 317 299 302 324 356 332 308 300 315 348 348 315 299 308 333 356 324 302 299 317 351 339 313 293 283

297 310 328 351 365 336 325 328 341 370 347 332 326 336 362 362 336 326 332 347 370 341 328 325 336 365 351 328 310 297

312 328 344 366 384 353 347 350 357 395 364 354 349 356 383 383 356 349 354 364 395 357 349 347 353 384 366 344 328 313

306 320 337 360 379 350 344 346 355 390 361 350 346 353 379 379 353 346 351 362 390 355 346 344 350 379 360 337 320 306

286 298 316 342 357 327 313 316 333 363 340 321 314 326 355 355 326 314 321 340 363 333 316 313 327 357 342 316 297 286

277 288 306 333 344 312 297 300 318 347 325 304 297 310 341 341 311 297 304 325 347 318 300 296 312 344 333 306 288 277

288 300 316 337 350 319 310 312 323 354 330 316 311 320 345 345 320 311 316 330 354 323 312 310 319 350 337 316 300 288

288 303 316 333 348 316 312 314 320 354 326 317 314 319 343 343 319 314 317 325 354 319 313 312 316 347 333 315 302 288

255 267 279 296 309 282 277 279 285 315 290 282 278 283 306 306 283 278 282 290 315 285 278 277 282 309 296 279 267 254

SINGLE 2600 0.800 25485 / Fagerhult / MultiFive Basic Beta / 1x28w / T5

Luminaire ScheduleSymbol Qty Label Arrangement Total Lamp Lumens LLF Description

30 F3

Calculation SummaryLabel CalcType Units Avg Max Min Min/Avg Min/Max View Angle # PtsRoom Illuminance Lux 329.17 395 254 0.77 N.A. N.A. 660

CUSTOMER SUPPORT

INTERNAL BACK-UP

Our Customer Service team, across Sydney, Melbourne & Brisbane deliver nationwide support from the first enquiry to delivery of the final luminaire on any given project, in addition to offering post-sales support where required.

When datasheets, technical drawings or installation instructions are needed these are also available from our Customer Service team, or via our website.

AUSTRALIAN MANUFACTURING

Through the relationship between Fagerhult and Eagle Lighting Australia, there is a commitment to ongoing manufacturing investment at our Melbourne facility. The concept of ‘Made in Australia’ is a principal upon which ELA can build for long-term success.

At our facility, we now have a seamless and efficient production line from manufacture, to assembly to distribution. The ability to manage the whole process allows for better quality control, better customisation, better production times, all of which provide better customer satisfaction backed by the assurance of local support.

TECHNICAL SUPPORT

Our Engineers and Lighting Design Departments provide invaluable support to employees and customers. Using the latest CAD design software such as 3DS StudioMax and Solidworks, ideas can be brought to life in a virtual world prior to construction.

Our Engineering Dept. have the ability to develop a new luminaire from a concept or visualise change to an existing fixture. The obvious advantage being we see if a design works prior to manufacture. Parts including electrical components, air-boots, lamps and gear trays are simulated in a digital environment, long before the first piece of steel is punched and formed by our NC Turret machines.

Our Designers can replicate any proposed lighting layout, but also calculate and generate 3D computer generated images (CGI). Their designs reflect how any space might look, complete with luminaires and all the photometric data specific to the design.

We offer additional support to our customers by providing Revit & IES files via our website or through providers like AGi32.

eagle lighting australiawww.eaglelighting.com.au [email protected]

melbourneeagle lighting vic17-19 Jets CourtMelbourne Airport, VIC 3045 Phone +61 3 9344 7444

sydney eagle lighting nswLevel 1, 71-73 Alexander StreetCrows Nest, NSW 2065Phone +61 2 9420 5799

brisbane eagle lighting qld53 Caswell StreetEast Brisbane, QLD 4169Phone +61 7 3891 0744

canberra eagle lighting actMobile +61 411 889 406

distributorstasmania southern lighting & distribution34 Federal StreetNorth Hobart, TAS 7000Phone +61 3 6231 5599Fax +61 3 6231 5211

western australia h.i. lighting pty ltd111 BroadwayBassendean, WA 6054Phone +61 8 9377 1322Fax +61 8 9377 1761

south australia h.i. lighting pty ltd14-16 Bailey StSt Marys SA 5042Phone +61 8 8304 8500Fax +61 8 8304 8501

new zealandfagerhult new zealandwww.fagerhult.com/nz 0800 324 374 [email protected]