Multicarrier interworking strategy

Security Level:

HUAWEI TECHNOLOGIES CO., LTD.

www.huawei.com

Multicarrier Interworking Strategy and Parameters for Hanoi Network

HISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD. Page 2

Contents1 Interworking Strategy

2 U2100 Network Strategy


4 GSM Network Strategy

HUAWEI TECHNOLOGIES CO., LTD. Page 3

Network Topology - U900&U2100&GSM – IDLE mode

Reselection (bi-directional)

Reselection (uni-directional)

G900

U2100 F2Access Layer

U2100 F3

Access Layer U2100 F1 U2100 F1

U2100 F2

Capacity/Non Access Layer

G1800 co-site

DCS1800 independent sites

Scenario 2

U900 U900Access Layer

Access Layer



G900


U2100 F3

IDLE MODE for Macro


U2100 F2

Access Layer

G1800 co-site


Scenario 1


Access Layer

U2100 F3

Idle Mode:From U2100 to U900: Qoffset2sn =5dB;From U900 to U2100: Qoffset2sn=-5dB;Among U2100 F1,F2,F3: Qoffset2sn =0dB;2G: CRO (GSM900 = 0, DCS1800 =2)

IBC F3IBC F3

Incase no F3 macro Incase no F3

macro

IDLE MODE for Macro


Network Topology - U900&U2100&GSM – Connected mode

G900

G1800 co-site

Coverage-based (uni-directional)Traffic -based (uni-directional)

HSPA RAB DRD (co-sector, bi and uni-directional)

Coverage-based CS & PS IFHO

For LDR ,2 possibilities : -Blind HO (F1 to F2, F1 to F3, F2 to F3)-Measurement based HO (F3 to F1)


CS Inter-RAT and LDR (to G900)

Load balance layer

U2100 F2

CONNECTED MODE for Macro

U2100 F1U2100 F1

U2100 F3

U2100 F2

IFHO LDR (co-sector, bi and uni-directional)

Scenario 2

U900U900

G900

G1800 co-site

Coverage-based (uni-directional)Traffic -based (uni-directional)

HSPA RAB DRD (co-sector, bi and uni-directional)

Coverage-based CS & PS IFHO

For LDR ,2 possibilities : -Blind HO (F1 to F2, F1 to F3, F2 to F3)-Measurement based HO ( F3 to F1)


CS Inter-RAT and LDR (to G900)

Load balance layer

U2100 F2

CONNECTED MODE for MACRO CELLs

U2100 F1U2100 F1

U2100 F3

U2100 F2

IFHO LDR (co-sector, bi and uni-directional)

Scenario 1

U900U900

U2100 F3

IntraFreq HO IntraFreq HO







3G Multicarrier Strategy for Macro

Strategy for Macro 3G cells:I. Based on the current situation:

Ha Noi Network already applied for Random camping to share the network resource and capacity.

Data traffic and DL/UL throughput are preferred to increase for better user experience

The distribution of F3 Carrier in whole 9 Ha Noi RNCsWe suggest Random camping strategy in Ha Noi as 2 scenarios below:Scenarios 1: For RNC more than 80% number of cells already have F3 (1109, 1110, 1112, 1113)1. Idle mode: UE will camp on F1, F2, F3 randomly.2. Dedicated mode:

F1 carrier: R99 + HSPA F2 Carrier: R99 + HSPA F3 Carrier: R99 + HSPA


Based on Carrier Distribution, we can see that 5 RNC has number of F3 cells less than 80% (1111, 1114, 1115, 1116, 1117), we suggest to Let F3 share the data mostly and idle mode only camping on F1 and F2 due to continuous coverage. This can provide more data resource for network.

Scenarios 2: For RNC less than 80% number of cells already have F3:1. Idle mode: UE will camp on F1 and F2 randomly.2. Dedicated mode:

F1 carrier: R99 + HSPA F2 Carrier: R99 + HSPA F3 Carrier: HSPA (before: F3 carrier for R99 + HSPA)

3G Multicarrier Strategy for Macro


U2100 Connected mode parameter setting - F1, F2, F3 random campingRNC level: SET UDRD: ServiceDiffDrdSwitch=OFF, LdbDRDSwitchHSDPA=ON, LdbDRDOffsetHSDPA=1, ULLdbDRDSwitchDcHSDPA=ON;ADD USPG: SpgId=5, PriorityServiceForR99RT=1, PriorityServiceForR99NRT=1, PriorityServiceForHSDPA=1, PriorityServiceForHSUPA=1, PriorityServiceForExtRab=1; // for RNC doesn’t have SPGID=5. Cell Level: MOD UCELLSETUP: CellId=6701, SpgId=5;MOD UCELLALGOSWITCH: CellId=6701, NBMCacAlgoSwitch=HSDPA_GBP_MEAS-1&HSDPA_PBR_MEAS-1;MOD UCELLSELRESEL: CellId=6701, QualMeas=CPICH_ECNO, IdleSintersearch=4; // IdleSintersearch=4 for all cell in F1, F2, F3MOD UCELLCAC: CellId=6701, DlConvAMRThd=90, DlConvNonAMRThd=90, DlOtherThd=85, DlHOThd=95, DlCellTotalThd=95, ULTOTALEQUSERNUM=160;MOD UCELLHSDPA: CellId=217, AllocCodeMode=Automatic, HsPdschMaxCodeNum=15, HsPdschMinCodeNum=10, HspaPower=0;

NB relation SIB11 Indicator

IdleQoffset1sn

IdleQoffset2sn

Blind Handover Flag

HOCovPrio

F3-F1 co-sector TRUE 0 0 TRUE 0F1-F3 co-sector TRUE 0 0 TRUE 0F3-F2 co-sector TRUE 0 0 TRUE 0F2-F3 co-sector TRUE 0 0 TRUE 0F2-F1 co-sector TRUE 0 0 TRUE 0F1-F2 co-sector TRUE 0 0 TRUE 0

F3-F1 other sector TRUE 0 0 FALSE 2

NB parameters:

For Macro: “F3-F1 other sector” only needs when “F1 other sector” doesn’t have F3 other sector accordingly.For IBC:Co-sector would be the same parameters. Co-sector to other sectors will have the same value as “F3-F1 other sector” above and this relation is followed by below rules: From the serving cells needed to plan: No intra then need inter to other sectors.


U2100 Connected mode parameter setting - F1, F2 random camping and F3 for HSPA only

For Macro: “F3-F1 other sector” only needs when “F1 other sector” doesn’t have F3 other sector accordingly.For IBC:Co-sector would be the same parameters. Co-sector to other sectors will have the same value as “F3-F1 other sector” above and this relation is followed by below rules: From the serving cells needed to plan: No intra then need inter to other sectors.

RNC level: SET UDRD: ServiceDiffDrdSwitch=OFF, LdbDRDSwitchHSDPA=ON, LdbDRDOffsetHSDPA=1, ULLdbDRDSwitchDcHSDPA=ON;ADD USPG: SpgId=5, PriorityServiceForR99RT=1, PriorityServiceForR99NRT=1, PriorityServiceForHSDPA=1, PriorityServiceForHSUPA=1, PriorityServiceForExtRab=1; // for RNC doesn’t have SPGID=5.

Cell Level:MOD UCELLSETUP: CellId=6701, SpgId=5;MOD UCELLALGOSWITCH: CellId=6701, NBMCacAlgoSwitch=HSDPA_GBP_MEAS-1&HSDPA_PBR_MEAS-1;MOD UCELLSELRESEL: CellId=6701, QualMeas=CPICH_ECNO, IdleSintersearch=4; // IdleSintersearch=4 for all cell in F1, F2 and IdleSintersearch=8 for F3MOD UCELLCAC: CellId=6701, DlConvAMRThd=90, DlConvNonAMRThd=90, DlOtherThd=85, DlHOThd=95, DlCellTotalThd=95, ULTOTALEQUSERNUM=160;MOD UCELLHSDPA: CellId=217, AllocCodeMode=Automatic, HsPdschMaxCodeNum=15, HsPdschMinCodeNum=10, HspaPower=0;

NB relationSIB11

Indicator

IdleQoffset1sn

IdleQoffset2sn

Blind Handover Flag

HOCovPrio

F3-F1 co-sector TRUE -50 -50 TRUE 0F1-F3 co-sector TRUE 50 50 TRUE 0F3-F2 co-sector TRUE -50 -50 TRUE 0F2-F3 co-sector TRUE 50 50 TRUE 0F2-F1 co-sector TRUE 0 0 TRUE 0F1-F2 co-sector TRUE 0 0 TRUE 0

F3-F1 other sector TRUE 0 0 FALSE 2







U900 IDLE mode



G900


U2100 F3

IDLE MODE for Macro


U2100 F2

Access Layer

G1800 co-site



Access Layer

U2100 F3

Idle Mode:From U2100 to U900: Qoffset2sn =5dB;From U900 to U2100: Qoffset2sn=-5dB;Among U2100 F1,F2,F3: Qoffset2sn =0dB;2G: CRO (GSM900 = 0, DCS1800 =2)

IBC F3

Incase no F3 macro


U900 Connected mode

G900

G1800 co-site

Coverage-based (uni-directional)


U2100 F2

CONNECTED MODE for MACRO CELLs

U2100 F1U2100 F1

U2100 F3

U2100 F2

U900U900

U2100 F3

IntraFreq HO

Single direction Coverage-based CS & PS IFHO

Measurement based IFHO LDR

InterRAT Load HO

Bi-direction Coverage-based CS & PS IFHO


Interworking parameter between U900 and U2100&GSM

Idle Mode:From U2100 to U900: Qoffset2sn =5dB;From U900 to U2100: Qoffset2sn=-5dB;Among U2100 F1,F2,F3: Qoffset2sn =0dB;Handover Over:Among U2100 F1,F2,F3: Blind Handover;From U900 to U2100: Coverage Handover;From U2100 to U900: Coverage Handover;U900 and U21 to GSM: Coverage HandoverGSM to U2100 and U900: Not ActiveLDR:Among U2100 F1,F2,F3: Blind handover;From U900 to U2100: Measurement Handover;From U2100 to U900: Not active;

Parameter

Parameter Annex:

Layer SIB11 IdleQoffset1sn IdleQoffset2sn BlindHandoverFlag HOCovPrioU900-F1 TRUE 0 -5 FALSE 2F1-U900 TRUE 0 5 FALSE 2F2-U900 TRUE 0 5 FALSE 2F3-U900 TRUE 0 5 FALSE 2







GSM – Idle Mode

GSM 900

DCS 1800

GSM 900

DCS 1800

Re-selection (bi-direction)

　　　　　　　　　　　　　　

Macro cell

IBC - SECTOR 2TOP FLOORS

IBC - SECTOR 1BOTTOM FLOORS

MO Parameter ID Parameter Name Value

GCELLIDLEBASIC CRO Cell Reselection Offset GSM 900 = 0DCS 1800 = 2


GSM – Mobility StrategyMO Parameter ID Parameter

Name HO Type IBC Macro 1800

Macro 900

GCELLBASICPARA LAYER Layer of the

cellInter Layer

HO 1 2 3

GCELLBASICPARA PRIOR Cell Priority Inter Layer

HO 1 1 1

GCELLHOBASIC HOTHRES Inter-layer HO Threshold

Inter Layer HO 36 38 35

GCELLHOBASIC LEVHOHYST Inter-layer HO Hysteresis

Inter Layer HO 2 2 2

G2GNCELL INTELEVHOHYSTAdjacent Cell Inter-layer HO Hysteresis

Inter Layer HO 67

G2GNCELL LEVSTAT Layer HO Watch Time

Inter Layer HO

Dense-urban and urban= 8Rural and sub-urban = 6

G2GNCELL LEVLAST Layer HO Valid Time

Inter Layer HO

Dense-urban and urban= 6Rural and sub-urban = 4

GCELLHOBASIC ULEDGETHRESEdge HO UL RX_LEV Threshold

Edge HO 18 22 10

GCELLHOBASIC DLEDGETHRESEdge HO DL RX_LEV Threshold

Edge HO 30 32 20

G2GNCELL EDGEADJSTATTIME

Edge HO AdjCell Watch Time

Edge HO 6

G2GNCELL EDGEADJLASTTIME

Edge HO AdjCell Valid Time

Edge HO 4

G2GNCELL PBGTMARGIN PBGT HO Threshold PBGT HO 68

G2GNCELL PBGTSTAT PBGT Watch Time PBGT HO Dense-urban and urban= 8

Rural and sub-urban = 6

G2GNCELL PBGTLAST PBGT Valid Time PBGT HO Dense-urban and urban= 6

Rural and sub-urban = 4

GSM 900

DCS 1800

GSM 900

DCS 1800

Inter_Layer HO (uni-direction)

PBGT HO (bi-direction)

EDGE HO (uni-direction)

EDGE HO (bi-direction)

　　　　　　　　　　　　　　

Macro cell

IBC - SECTOR 2TOP FLOORS

IBC - SECTOR 1BOTTOM FLOORS


GSM to UMTS

U2100 – F2

GSM 900

U900 – F1

U2100 – F1

U2100 – F3

Bi-direction if no U2100-F1Uni-direction U2G if has U2100-F1

IDLE MODE

U2100 – F2

GSM 900

U900 – F1

U2100 – F1

U2100 – F3

Incase no U2100-F1

CONNECTED MODE

Coverage-based CS & PS IFHOReselection (bi-directional)


Parameter ID Parameter Description ValueQI Qsearch I 7 (Always search)

INTERRATCELLRESELENInter-RAT Cell Reselection Enable

Yes

FDDREP FDD REP QUANT RSCPFDDRSCPMIN FDD RSCP Min. 6 (~ -102 dBm)FDDQOFF FDD Q Offset 0 - (always select a cell if acceptable)FDDQMIN FDD Qmin 6 (~ -14 dB)FDDQMINOFFSET FDD Qmin Offset 0

Parameter ID Parameter Description Value

QSEARCHCQsearch C 15: Positive infinity

(never)QP Qsearch P 7: Always

INTERRATOUTBSCHOEN Inter-RAT Out BSC Handover Enable NO

INTERRATINBSCHOEN Inter-RAT In BSC Handover Enable YESSPTINTERRATOUTBSCPSHO

Support Out Inter-RAT Inter-Cell PS Handover

UNSUPPORT


THANK YOU!

Multicarrier interworking strategy

Mobile