MULTI-TOOL CARRIER - Rayco Mfg.€¦ · call - 800.392.2686 visit - rm27 power broom stump cutter brush cutter push blade bucket tiller multi-tool carrier

800.392.2686CALL - VISIT -

RM27POWER BROOMSTUMP CUTTERBRUSH CUTTERPUSH BLADEBUCKETTILLER

MULTI-TOOL CARRIER

• 7-inch wide rubber tracks

• Year-round traction and flotation

• 2-speed travel

• Optional non-marking rubber tracks

• Kohler Command gasoline engine

• 26.5hp fuel injected

• Heavy duty dual element air cleaner

• 3 year Kohler limited warranty

• Easy to operate attachment system

• Attachment plate with single pin locking mechanism

• Hydraulic quick couplers to power work tools

• 13.8gpm hydraulic flow provides power that rivals dedicated machines

The RM27 MULTI-TOOL CARRIER is a new platform for operating

a variety of work tools, including the stump cutters, tillers, trenchers,

brush cutters, snow throwers, power brooms, push blades, and more.

This unique machine provides operators with an economical and ver-

satile tool carrier capable of utilizing a variety of implements. The

RM27 maximizes profit by powering work tools at a fraction of the

price of owning a dedicated machines.

Centrifugal Precleaner

Independent Controlsfor Left/Right Tracks

Operator-FriendlyControls

Two-Speed Travel

Hour Meter

13.8 GPM Powerful Hydraulic System to Operate Work Tools and Attachments

Easy to Use Attachment Plate Coupling System

Hydraulic Oil Cooler

Kohler 26.5hp EFI Gasoline Engine

7” wide (180mm) Rubber Tracks (left)• Optional Non-Marking Tracks Available (right)

Quick DisconnectHydraulic Couplers

RM27 MULTI-TOOL CARRIER

Beltless Hydraulic Drive on Powered Work-Tools

PUSH BLADE• Constructed of ¼-inch steel

• Replaceable wear edge

• 47¾-inch width

• Articulation angle 25 degree left and right

BRUSH CUTTER• 44-inch cutting width

• 2 swinging cutter blades

• Deck constructed of 10 gauge steel

• Beltless hydraulic drive

POWER BROOM• 43-inch working width

• Articulation angle 16 degree left and right

• Beltless hydraulic drive

STUMP CUTTER• 15½-inch cutter wheel

• 18 Rayco Super Tooth cutter tools

• Beltless cutter wheel drive

• Cuts 30”w x 24”d x 27”h

BUCKET• Constructed of 10 gauge steel

• 300-pound load capacity

• 35-inch wide x 19-inch deep

• Serrated cutting edge

TILLER• Working width 25 ½-inches

• Maximum depth 6-inches

• Beltless hydraulic drive

• Power to till in hard-packed soil

The RM27 MULTI TOOL CARRIER adds capability to your business for minimal cost.

For a fraction of the price of dedicated machines, the RM27 is ready to take on multiple tasks

by simply switching out attachments. The wide variety of work tool attachments help you

accomplish almost any landscape or property maintenance project, from snow removal to

garden tilling. Attachments are designed to be simple to operate and maintain with beltless

hydraulic drive and heavy duty construction. And the RM27’s hydraulic system is rugged

enough to operate power hungry attachments like stump cutters and trenchers.

All rights reserved to Rayco Manufacturing, Inc. All research is done by Rayco. All statements are expressed under the strict supervision of Rayco. If any of the statements should be false or incorrect, Rayco might consider altering these. Rayco Manufacturing Inc. retains the right to make changes in design and specifications; engineering; add or remove features; add improvements; or discontinue manufacturing at any time without notice or obligation. All claims and statements on this document are not legally binding, and are subject to change. No legal obligations can be derived from this document.

RM27 Multi-Tool Carrier February 2017 Made and Printed in the USA • Copyright © 2016 RAYCO Manufacturing, Inc., Wooster, OH 44691

RM27 MULTI-TOOL CARRIER SPECIFICATIONS

GENERAL US METRIC

Weight 1,100 lb 499 kg

Length 69.5” 176.53 cm

Height 48.5” 123.19 cm

Width 35.5” 90.17 vm

Tracks 7” Wide Rubber 17.78 cm

Travel Speed (low/high) 1mph / 1.7mph 1.6 km/h / 2.74 km/h

ENGINE

Model Kohler ECH749 Kohler ECH749

Gross HP 26.5 hp Fuel Injected 19.8 kW Fuel Injected

Fuel Tank Capacity 9 gal 34.1 L

HYDRAULIC SYSTEM

Oil Tank Capacity 5.87 gal 22 L

Pump Flow to Tool Attachment 13.8 gpm 52.2 L/min

Attachement Tool Maximum Pressure 3,000 psi 207 Bar

YEAR ROUND VERSATILITY TO TACKLE ANY JOB

RM27 shown with BRUSH CUTTERRM27 shown with POWER BROOM