Fujitsu’s FLASHWAVE 4x70 Multi- Service Provisioning Platform (MSPP) series provides telecommunication carriers and Multi-Service Provisioning Platform (MSPP) service providers with a powerful solution to survive their fiercely competitive industry. Integrating reliable and intelligent SDH functionality and efficient Ethernet aggregation and switching into a compact body, the FLASHWAVE 4x70 MSPP enables both traditional voice based both traditional voice-based services and increasingly diverse data services to be delivered over a unified optical network. Enriched with next-generation SDH functionality, the FLASHWAVE 4x70 MSPP allows carriers to not only simplify their network, but also to efficiently, flexibly, and dynamically use network bandwidth with a simple management procedure. In this way, the FLASHWAVE 4x70 MSPP helps to satisfy the growing end-user’s demand in an increasing variety of broadband services at a substantially reduced cost. High-density STM-16-based platform to support dual STM-16 rings in a single node. Flexible subrack architecture with 11 interface slots and six connector slots All-in-one-box solution to satisfy Ethernet Transport Features Data service applications including EPL (Ethernet Private Line), EVPL (Ethernet Virtual Private Line), EPLAN (Ethernet Private LAN), and EVPLAN (Ethernet Virtual Private LAN) Layer 2 processing to reduce bandwidth requirements and therefore Key Benefits network and service demands from STM-16, STM-4, STM-1, STM-1E, E3, DS3, and E1, to Fast Ethernet and Gigabit Ethernet Reliable optical network supported by traffic protection schemes such as 1+1 MSP, SNCP, and 2-fiber MS- SPRing for SDH layer as well as Rapid Spanning Tree Protocol (RSTP) for bandwidth requirements, and therefore enable cost-effective data transport over the SDH infrastructure VLANs or double-tagged VLANs to enable 802.1p QoS/CoS, as well as segregation of traffic flows, and thereby increase security without sacrificing bandwidth efficiency or network flexibility The FLASHWAVE 4270 is an STM- 16 MSPP optimized for Metro Aggregation and Access applications. Typical node configurations are: D l STM 16 i ith 24 Spanning Tree Protocol (RSTP) for Ethernet layer Next-generation SDH functionality such as General Framing Protocol (GFP), Virtual Concatenations (VCAT), and Link Capacity Adjustment Scheme (LCAS) functions for dynamic bandwidth allocation, adjustments, and protection Advanced Resilient Packet Ring (RPR) technology to provide high- reliable and efficient data transport with QoS control Dual STM-16 rings with 24 x STM-1 lines Single STM-16 ring with 8 x STM- 4 and 24 x STM-1lines Single STM-16 ring with 189 x E1, 8 x FE (Transparent), 4 x GE + 16 x FE (L2 switching) Management Features Non-blocking switching matrix with a capacity optimal for metro networks; 25 Gbps for high-order VC and 10 Gbps for low-order VC Small Form-factor Pluggable (SFP) interfaces to deliver optical rate and parameter flexibility on a per-port basis Common interface cards with Speedy operation and maintenance through local craft terminal FLEXR L Network element and sub-network- based management system FLEXR C, supporting all the FLASWAVE 4x70 products, to enable seamless management of all SDH, PDH, and Ethernet layers Flexible Access and Aggregation Management Common interface cards with FLASHWAVE 4470