Multi-Functional Materials and Structures II Selected, peer reviewed papers from the 2nd International Conference on Multi-functional Materials and Structures, October 9-12, 2009, Qingdao, Shandong, P. R. China PART 2 Edited by Yansheng Yin and Xin Wang 1%) TRANS TECH PUBLICATIONS LTD Switzerland • UK • USA
17
Embed
Multi-Functional Materials and Structures II Materials andStructures II Selected, peerreviewed papers from the 2ndInternational Conferenceon Multi-functional Materials andStructures,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Multi-Functional Materials
and Structures II
Selected, peer reviewed papers from the
2nd International Conference on
Multi-functional Materials and Structures,
October 9-12, 2009, Qingdao, Shandong, P. R. China
PART 2
Edited by
Yansheng Yin and Xin Wang
1%) TRANS TECH PUBLICATIONS LTD
Switzerland • UK • USA
PART 2
V. Computer Modeling and Analysis
Numerical Study on Rapid Solidification of a Plasma-Sprayed Cast Iron Splat on a
High-Temperature Substrate
Y.Z. Xing, Q.L. Wei, J.M. Hao and C. Shang 1129
Structural Design and Performance Testing of Flexible Fabric Keyboard Switch
M.L. Zhang and R. Wang 1133
Notched Tensile Fracture of Ti-6Al-6V-2Sn Welds at Elevated TemperatureL.W. Tsay and C.L. Hsu 1137
Calculation of Flexural Capacity of Steel Reinforced Concrete Beams Strengthenedwith FRP
J.F. Liang, Z.P. Yang and L.L. Yan 1141
Research on Chaotic Behavior of Concrete under External Load Based on Discontinuous
Medium Mechanical Model
H. Qin and S.C. Li 1145
Ixii Multi-Functional Materials and Structures II
Coupled Numerical Analysis of the Anti-Crack Mechanism for Open-Graded Large Stone
Asphalt Mixes
H.B. Guoand S.F. Chen 1149
Finite Element Method Simulation of 35# Steel Cathodic Protection Models in the Seawater
H.Y. Sim, W. Wang and L.J. Sun 11S3
The Effect of Creep on Morphology Change of Surface Groove on Fecralloy in TBCs
during Thermal Oxidation CyclesX. Huang, J. Ding and K.J. Kang 1157
Numerical Investigation on the Effect of Copper Filler Thickness on the Brazed
Residual Stress
Q.Y.Xieand X. Ling 1161
Mathematical Modeling of the Fracture Toughness of Phenol Formaldehyde CompositesReinforced with E-Spheres
H. Ku, W. Xiang and N. Pattarachaiyakoop 1165
Numerical Simulation of Thermal Cycle of In-Service Welding on X70 Steel Gas PipelineY.H. Chen, Y. Wang and Z.F. Wang 1169
A Study on Process-Induced Warpage of Curing Mold of Composite Structures
G.Q. Yue, B.M. Zhang, S.Y. Du, F.H. Dai, C. Zhang, X.Z. Liang and Y.G. Wang 1173
Calculation and Analysis ofValence Electron Structures of the Precipitated Phases in
Al-Cu AlloyW.D. Liu and H. Qu 1177
Identification of Delamination in Anisotropic Laminated Plate
C. Du, Q.Q. Ni and T. Natsuki 1181
Atomic Simulation of the Bending Deformation of a Single-Crystal Simply
Supported Nano-Beam
W.B. Ni, J.W. Zhao, Y.H. Liu, F.Y. Wang and X. Yin 1185
Three-Dimensional Numerical Simulation of Residual Stresses by Shot-PeeningH.W. Zhang, Y.D. Zhang and Q. Wu 1189
Quantum Chemical Calculation of Maleic Anhydride Ring-Opening Reaction
M. Zhang, Z.X. Huang and Y. Qin 1193
Theory Study of the Geometrical Isomerism Influence on Hole-Transport Material's
Residual Potential of Organic Photoconductive
Y. Jing, S.R. Wang andX.G. Li 1197
First-Principles Calculations on the Geometry and Electronic Structure of Rutile
Ti02 (110) Surface
H.B. Su, P. Yang, J.B. Wang and N. Huang 1201
Dynamic Models for Magnetorheological Dampers and its Feedback Linearization
C. Zhang and L.X. Wang 1205
Simulation on Uniaxial-Tension Behavior of NiTi Shape Memory Alloy Films
S.S. SunandJ. Dong 1209
Experiment Research on Purifying Metallurgical Grade Silicon and Crystal Growth in
Directional Solidification
X.Y. Mei, W.H. Ma, K.X. Wei and Y.N. Dai 1213
Polyethylene Rubber Composite Target Resistance to Jet Penetration
X.D. Zu, Z.X. Huang, Q.Q. Xiao and M. Xia 1217
A Study on the Advanced Surface Characteristic of Yttria (Y203) Ceramic by UsingOptimal Design of Process
J.W. Chaand E.S.Lee 1221
The Gradual Damage Analysis for the Two-Dimension Unit Cell of the CompositeJ. Yu, R.R. Shi and Y.Z. Liu 1225
Advanced Materials Research Vols. 79-82 Ixiii
Process Analysis and Numerical Simulation of Equal Channel AngularPressing and Torsion (ECAPT)
Y.Z. Li, K.M. Xue and P. Li 1229
Studies on Magnetic Shielding Effectiveness by Finite Element Method
Experimental Researches on the Mechanical Properties of Three Dimensional
Multidirectional Braided CompositesY. Sun, J.L. Li, L. Chen and Y. Shao 1237
Buckling Response of Metallic Foam Composite Sandwich Panels Subjected to
Edgewise CompressionX.Z. Wang, L.Z. Wu and S.X. Wang 1241
Electronic Structure and Optical Properties of Non-Metals (N, F, P, CI, S)-Doped Cubic
NaTa03 by Density Functional TheoryP.L. Han, X.J. Wang, Y.H. Zhao and C.H. Tang 1245
First-Principles Study ofthe Electronic Structure and SpontaneousPolarization of PbZro.4Tio.6O3
Q.X. Zhao, B. Ceng, L. Guan, Q. Li, J.K. Ma, D.Y. Wei, J.X. Guo and B.T. Liu 1249
First-Principles Study on the Conductive Properties ofP-Doped ZnOL. Guan, Q. Li, X. Li, J.X. Guo, B. Geng, L.T. Jin, Q.X. Zhao, J.W. Zhao and B.T. Liu 1253
Atomic and Electronic Structure of LaAI03 and LaAIOvMg from
First-Principles Calculations
L. Guan, L.T. Jin, W. Zhang, Q. Li, J.X. Guo, B. Geng, Q.X. Zhao and B.T. Liu 1257
Kinetics of Sol-Gel Transformation for the Preparation of'Ti02 Ultrafiltration Membrane
X.P. Cao, W. Huang, W.H. Jing and W.H. Xing 1261
Experimental and Numerical Study ofthe Influence of a Low-Frequency ElectromagneticField on the As-Cast Structure of Horizontal Direct Chill Casting Aluminum Alloy Slab
Z.H. Zhao, J.Z. Cui, Q.F. Zhu and G.S. Wang 1265
3D Fem Study of Fluid Flow in the Mould for Billet Continuous CastingW. Chen, B.X. Wang, Y.Z. Zhang, J.H. Ma and S.J. Yuan 1269
Modeling and Testing for Small-Scale Time Delay Device Based on
Magnctorheological Fluid
L. Sui, G.C. Shi, K. An and B.J. Wei 1273
Effects ofMaterials on Formation of Double-Layered Liners Shaped ChargesY. Zheng, X.M. Wang, W.B. Li and W.J. Yao 1277
Synthesis and Formation Mechanism of Hollow Carbon Spheres ContainingFe3N Nanocrystals
B.Y. Liu, D.C. Jia, L.H. Dong and Y.S. Yin 1281
Numerical Simulation on Characteristics ofDense-Phase Pneumatic Conveying in
Horizontal PipeZ.M. Liu, H. Yi, W.L. Zhao and X.S. Li 1285
Molecular Simulation of the Interfacial Properties of an Epoxy Composite Reinforced Usinga Carbon Nanotube/Carbon Fiber Hybrid
F.H. Zhang, X.D. He, L.H. Dong and Y.S. Yin 1289
A Study on the Crack-Controlled Layer ofTJHTCC in Functionally-GradedComposite Beams
Q.H. Li andS.L. Xu 1293
Numerical Study on the Mechanical Behavior of Aluminum Foam Material
Using CT ImageH. J. Chung, K.Y. Rliee, B.S. Han and Y.M. Ryu 1297
Ixiv Multi-Functional Materials and Structures II
Effects of Magnetic Field Gradient on Particle Distributions of Suspension Comprised of
both Magnetic and Nonmagnetic Particles Using Two-Dimensional
Monte Carlo Simulations
X.L. Peng, M. Yan and H.L. Ge 1301
Modeling of Dynamic Characteristics of Ionic Polymer-Metal Composite Beam near
Resonant FrequenciesL. Zhang and Y.W. Yang 1305
Recent Development of Molecular Simulation Based on GPU in Material Science
K. YuandB.Zhu 1309
Nonlinear Dynamic FE Simulation of Smart Piezolaminated Structures Based on First- and
Third-Order Transverse Shear Deformation Theory
R. Schmidt and T.D. Vu 1313
Modeling and Simulations of Pd/n-ZnO Schottky Diode and its Comparisonwith Measurements
S. Faraz, H. Noor, M. Asghar, M. Willander and Q. Wahab 1317
Modeling and Optimization of Nanomechanics ofDiamond-Like Carbon by MPCVD Using
Response Surface MethodologyJ.S. Chen, K. Ting and H.C. Wang 1321
Study on Nanomechanical Properties of Dragonfly WingC.H. Chang, K. Ting and K.T. Chen 1325
Numerical Study on Damage Response of Ship Composite Armor Structures to Contact
Underwater ExplosionL. Yang, Y. Wang, Q.M. Zhang and Z.P. Du 1329
Electronic Structure of Bimetallic Fe/wAlw (m+n=6) Clusters
Preparation of Amorphous Calcium Phospliate/Triclcium Silicate Composite Powders
Q. Lin, Y.B. Li, X.H. Lan, C.H. Lu and Z.Z. Xu 1643
Preparation and Structural Phase Transitions of Silver Palmitatc
Y.L. Li, S. Wang, X. Zhang and X.L. Yang 1647
Permanent Mold Suction Casting for TiAl Based Alloys
Y.Q. Su, X.C. Ye, J.J. Guo, L.S. Luo, L. Wang and H.Z. Fu 1651
Microstructure Evolution of Directionally Solidified Al-25at.% Ni Peritectic Alloy
Y.Q. Su, D.M. Liu, X.Z. Li, L.S. Luo, J.J. Guo and H.Z. Fu 1655
The Preparation of Ti-6A1-4V Alloy Rod and Blade by Metal Mold Suction Casting and the
Effects ofHydrogen on Them
L. Wang, Y.Q. Su, X.C. Ye, L.S. Luo, J.J. Guo and H.Z. Fu 1659
The Research of SOL Treated Cantilever Beam Based on Analytical Methods and ANSYS
Y.P. Cao and X.H. Shi 1663
Research on the Anti-Static and Anti-Radiation Properties of Fabrics Containing Stainless
Steel Microfilament
Z.Q.Zhang and Y.H. Ye 1667
In Situ Growth of Carbon Nanotubes in Hydroxyapatite Matrix by Chemical
Vapor DepositionX.Y. Lu, H. Wang, S.Y. Xia, J.X. Wang and J. Weng 1671
Morphological Characterization of Chitosan in the Hydroxyapatite/Chitosan Nanocomposites
X.Y. Lu, X.H. Wang, J.X. Wang, S.X. Qu and J. Weng 1675
Research on the 1.06 urn Reflectivity of Subwaveleugth Surface-Relief Structure via Finite
Different Time Domain Method
W.J. Huang, C.H. Lu, W.M. Tan, Y. Zhang and Z.Z. Xu 1679
Phosphotungstic Acid/Semi-Coke Catalysts for Oxidative Desulfurization of Diesel Fuel
L. Wang, C.H. Li and Y.F. Hou 1683
Advanced Materials Research Vols. 79-82 Ixix
Study on Microstruclure and Properties ofAged Cu-Ti-Zr-RE AlloyX.M. Cao, Y.B. Zhu, F. Guo and C.J. Xiang 1687
Fabrication and Evaluation of Electrolyte-Supported Hollow Fiber Solid Oxide Fuel Cells
C.L. Yang, W. Li, S.Q. Zhang, J.J. Liu, C.S. Chen and W. Liu 1691
Hydrogen Permeation Performance and Chemical Stability ofNi-Lai.MCao.osCejO in an
H2S-Containing AtmosphereL.T. Yao, S.M. Fang and W. Liu 1695
The Study of Ultrasonic Dynamic Elastic Modulus of TiNiFe Shape Memory Alloy in
Heating Process
X.P. Gaoand F.S. Liu 1699
Switching Porphyrin Fluorescence on and off through Redox
P.H. Zhu, C. Zhu, Y.F. Zhao, Q. Wei and Y.L. Chen 1703
Structure and Photoluminescence Investigations of Self-Organized InAs/GaAs
Quantum Wires
L.M. Kong, C.X. Zhang, R. Wang and S.L, Wang 1707
Ci-ystal Structure and Optical Spectra ofEr:NaLaxYb<).;<(Si0.i)(i02 (x=0,3,5,7,9) CrystalsPrepared through a Hydrothermal Routine
W.Y. Zhang, C.H. Lu, Y.R. Ni, Y. Zhang, Z.Z. Xu and J.B. Song 1711
A New Phosphate-Bonded Investment Material for Rapid Ceramic Molding of Medium-
Size CastingsT.Z. Li, J.R. Luo, S.S. Wu and L. Wan 1715
Research on Purification of Attapulgite Clay and Adsorption Characteristics for
Metal Cations
Z.H. Zhang, S.Y. Zhang and X.D. Liu 1719
Preparation and Properties of Novel Bonded Perovskite Manganite Oxides
X.S. Yang, L.Q. Yang, L. Lv and Y. Zhao 1 723
High-Frequency Vibration Response of Metal Honeycomb Sandwich Structure
X.D. He, X.H. Kong, L.P. Shi and M.W. Li 1727
Accurate Displacement Measurement for Landslide Prediction by Sampling Moire Method
Y. Morimoto, M. Fujigaki, A. Masaya, H. Kondo and T. Inuzuka 1731
Study on Dynamic Friction Process of Sweat Self-Lubricating Composite at Elevated
Temperature Based on CA Method
S.S. Yan and Z.M. Liu 1735
Influences ofPretreatment Solution Concentrations on Copper-Doped SiC Particles Made
through Electroless Plating TechniqueM. Hu, Y.F. Su and M.Z. Wu 1739
Crystal Orientation and Surface Morphology of Sono-Electroplatcd Zinc Film from Alkali
Zincale Bath
A. Chiba 1743
Manufacturing of Heavy Plates with Excellent Mechanical Properties by a 40t ESR Furnace
for Slab Products
X. Geng, Z.H. Jiang, F.B. Liu and H. Peng 1747
Study on the Toughness Performance of Polypropylene Fiber and SBR Polymer Latex
Modified Cement Mortar
F. Xu, M.K. Zhou, W.G. Shen and B.X. Li 1751
Formation Enthalpies of 18 Carat Au-Cu-Ni-Zn-RE Alloys Calculated With Chou' Models
X.Z. Xiang, X.J. Bai, S.F. Ma, G.T. Zhang and Y.K. Su 1755
Investigation on Interlaminar Mechanical Properties of Hybrid CFRP/VGCF Laminates
Y. Li, N. Hori, M. Arai, H. Fukunaga and N. Hu 1759
Ixx Multi-Functional Materials and Structures II
Preparation ami Characterization ofNature Rubber/Attapulgite CompositesJ.H. Wang, D.J. Chen, H.L. Min and Z.F. Tang 1763
Studies on Preparation and Property of2.5D Si02f/ Si02 CompositesS.A. Han, K.H. Jiang and J.W. Tang 1767
Experiment Study on the Chloride Penetration of Steel Fibre Reinforced Concrete
M. Bai, D.T. Niu and X. Wu 1771
Microstructure and High Temperature Oxidation of the Hot-Dipping Al-Si Coating on Low
Carbon Steel in Ethanol, Water Vapor and Air at 700°C
M. Badaruddin and C.J. Wang 1775
Interlaminar Shear Strength of Glass Fiber Reinforced Dially Phthalate Laminates
Enhanced with NanoclaysZ.X. Kong and J.H. Wang 1779
Experimental Study for Performance Influence ofVarious pH Values on Pavement Straw
Composite Fibers
Q. Xue, J. Wang, X.T. Feng and X.L. Liu 1783
Hyclrotliermal Synthesis and Electrochemical Study of VOv/CNTs CompositesQ.Y. Zhu, S.P. Hu, F. Wu and W. Chen 1787
Microstructure Evolution and Mechanical Properties of 7A09 Aluminum Alloy duringRapid Solidifications
W.W. Wang, B.B. Jia and J.B. Yu 1791
Preparation of Semi-Solid Billet with Less Liquid Content of 7A09 Aluminum Alloy byPartial-Melting Method
W.W. Wang, J.L. Song and J.B. Yu 1795
Study on Antibacterial Mechanism of Ag-Inorganic Antibacterial Material
Containing Lanthanum
X.N. Tang, B. Zhang, G. Xie and X.S. Xia 1799
Interface Strength and Structure of Explosive Welding Sainless Steel-Aluminuin Clad
H.W. Liu and J.B. Yu 1803
Preparation of High-Purity YAG Powders by Gel Solid-State Reaction
X.H. Wang, G.Q. Zhao, S.B. Lu and G. Li 1807
Low Temperature Synthesis of Magnesium Aluminate Spinel from AlOOH and
MgO Powder
X.H. Wang, S.B. Lu, CM. Wang and H.B. Yu 1811
Thermal Energy Discharge Characteristics of a PCM Heat Exchanger with Calcium
Chloride HexahydrateX.Q. Zhu, H. Jin, Y.F. Yang, Z.S. Cao, J.S. Lu and J.L. Sun 1815
Sedimentation Equilibrium of TJltrafine Al(OH)3 Particles in Aqueous Solution
S. Zhao, Q. Ma, L.Y. Qiu and B. Yu 1819
Fabrication and Properties of Cc3+ and Tb3+ Co-Doped Ca2SrAl2Os PhosphorX. Li, L. Guan, C. Liu, F. Cong and Z.P. Yang 1823
Preparation of Nitrogen Doped ZnO Dilute Ferromagnetic Semiconductor byMagnetron Sputtering
W.S. Lin, W. Wei and W. Heng 1827
Oxygen Reduction Eleetrocatalysts Based on Two-Dimensional Iron PolyphthalocyanineG.F. Xu, Z.F. Li, S.W. Wang and X.J. Yu 1831
Low Velocity Impact Damage Evaluation of 2D C/SiC Composite Material
L.J. Yao, Z.Y. Feng and Q.Y. Cheng 1835
Fabrication of Polystyrene-Encapsulated Nanodiamond via In Situ Latex Polymerizationand their Wettability Evaluation
B. Bai, P.P. Wang, L. Yang and YJ. He 1839
Advanced Materials Research Vols. 79-82 Ixxi
Investigation on Microwave Absorbing Properties of Double-LayerCementitious Composites
X.Z. Zhang and W. Sun 1843
Preparation and Properties ofNano-Inorganic Mineral Material as LubricatingOil Additive
P. Wang, S.H. Zheng, Y.S. Yin and D.C. Su 1847
Growth of Carbon Nanocoils Using Chemical Vapor DepositionC.C. Su, Y.L. Hsieh and S.H. Chang I 851
Flexural Testing of Fiber Reinforced Polymer-Concrete Composite Bridge SuperstructureY.L. Wang, Q.D. Hao and J.P. Ou 1855
Damping Performance of Cocured Composite I-Shaped Beams with Embedded
Viscoelastic LayersC. Xu and S.Lin 1859
Anti-Wear and Reduce-Friction Ability ofZrCh/SiCh Self-Lubricating CompositesS.Y. Ma, S.H. Zheng, H.Y. Ding and W. Li 1863
Developing a New Method for the Formation of NiO Hollow Microspheres UsingYeasts as Bio-Templates
L. Yang, W.S. Guan, B. Bai and Y. Xiang 1867
Study on the Wear Resistance of ZnA127 Composite Reinforced by SiC Particles
J.P. Xie, S.Q. Yan, A.Q. Wang, W.Y. Wang, G.W. Li and X.L. Li 1871
Effects of Chlorine Ion on the Photocatalytic Activity of Cuprous Oxide Powders Preparedby Hydrothermal Method
J.W. Zhai, R.J. Gao, K.G. Jiang and M.Z. Sun 1875
Preparation of Low Chlorine Shellac from Seedlac by Dechlorination Process Using Pd/Fe
Binary Metal as CatalystY.L. Liao, F.C. Xu and D.B. Li 1879
Synthesis of NH2-Functionalized Nano-Fe304 Magnetic Polymer Adsorbent and its
Application for the Removal of Cr (VI) from Industrial Wastewater
Y.G. Zhao, H.Y. Shen, M.Q. Hu, F. Wei, Y.J. Luo and Q.H. Xia 1883
Improvement on the Efficiency ofDrawing during the Production of
Microfibrillar CompositesR.J.T. Lin, S. du Preez, J. Slaats and D. Bhattacharyya 1887
A Study of Surface Treatment on LY12 Aluminum Alloy by y-APSD.S. Xia, Y.Z. Gao, H.C. Zhang and Y. Yu 1891
Thermal Parameters of Sweat Lubricating Composite and its Effect on High Temperature
Rolling BearingY. Lu and Z.M. Liu 1895
Research on the Growth Mechanism of Alumina Ceramics with Columnar Grain
S.F. Rong, Y.C. Zhu, J.Q. Zhang, H.L. Liu and C.Y. Shi 1899
Research on Zinc-Silica Composite PlatingY.Y. Fan, Y.J. Zhang and P. Dong 1903
Experimental Research on the Preparation of Porous Activated Carbon from
Orange Wastes
Z.G.Xie 1907
Effects of Different Cooling Rate and Modifiers on the Microstructurcs of
4Y32 Aluminum AlloyG.S. Wang, Y.B. Zuo, Z.H. Zhao and J.Z. Cui 1911
Study on Seawater Corrosion of Fe-Al Intermctallic CompoundQ.H. Bai, X. Wang and W.T. Fan 1915
Ixxii Multi-Functional Materials and Structures II
The Uniform Elongation of Web and Flange of H-Beam
J.H. Ma, W.Z. Zhang, W. Chen, S.B. Zheng and H.B. Li 1919
Damage Evolution ofDelayed Fracture in Woven GFRP under Hot Water Environment
M. Kolani, K. Nakamichi, Y. Yasufuku and H. Kawada 1923
Oriented Growth of cBN Crystals Along [100] Direction in Hydrothermal Conditions
G. Lian, X. Zhang, L.L. Zhu, M. Tan, D.L. Cui and Q.L. Wang 1927
Influence ofDye-Polyether Derivatives Architecture on Parent C. I. Disperse
Yellow 64 DispersionX. Dong, Z.H. Zheng and IX. He 1931
Preparation of Inorganic/Organic Hybrid Membrane Adsorbents for Gasoline
Desulfurization: Control of the Membrane Structure
T. Wang, X.L. Zhao, Y.Z. Zhang and H. Li 1935
Dry Sliding Wear Behavior of Fe3Al Intermetallics Prepared by Mechanical Alloying and
Hot PressingJ. Li, K. Yu, L. Shi and Z.Q. Ma 1939
Carbonate Steelmaking Slag to Manufacture Building Materials
H. Z. Wu, J. Chang, Z.Z. Pan and X. Cheng 1943
Through-Thickness Texture Variation in Non-Oriented Electrical Steel Sheet Produced by
Asymmetric RollingW. Pei, Y.H. Sha, H.P. Yang, F. Zhang and L, Zuo 1947
Plastic Deformation and Damage Behavior of AL6XN Super-Austenitic Stainless Steels
C.Q. Ma, Q.Q. Duan and X.W. Li 1951
The Concentration Fluctuation near Critical Temperature of Liquid Bi3.uGa(,,,.7 AlloyZ.M. Wang, H.R. Geng, G.R. Zhou, Z.Q. Quo and X.Y. Teng 1955
Strength Prediction of Connecting Frame in Aircraft Composite Cabin
L.B. Zhao, F.R. Lin and J.Y. Zhang 1959
Mechanism of Steel Corrosion Inhibition Using Mannich Bases
C. Bogatu, 1. Manciulea and A. Duta 1963
Wet Surface Modification of Light Calcium Carbonate Powder by Aluminate
Coupling AgentL.C. Li and Y.Zhang 1967
Process Optimization of Preparation and Performance Characterization of Oily Sludge-Based Adsorbent Material by Pyrolysis
G.Y. Zhang, Y.F. Hou, C.H. Li, W. Zhu and J. Zhang 1971
Superdecp Penetration - Novel Method of Nanoreinforccd Composites Producing Based on
Metallic, Ceramic and Polymer Matrixes
0. Figovsky and S. Usherenko 1975
New Methods of Preparing Multi-Functional Nanocomposite CoatingsO. Figovsky 1979
Sic Based Ceramic Foams Reinforced by /// Situ Mullitc Whisker
X.L. Ji, F. Xu and H.Y. Chen 1983
Corrosion Properties of Magnetron Sputtered Al-Mg Alloy Coatings on High-SpeedElectro-Galvanizing Steel
X.L. Gu, Y.Q. Shan and C.S. Liu 1987
Fabrication of(TiB2, TiCJ/B^C Composites via TijAl IMC Added in B.,C Ceramics
Y.S. Yin, W.K. Zhang, L.H. Dong, Y. Lei, J. Li and L. Xiao 1991
Thickness Measurement of Composite Material Using Eddy Current TestingP.M. Chen, P.J. Huang, B. Ye, G.H. Li and Z.K. Zhou 1995
Advanced Materials Research Vols. 79-82 Ixxiii
Preparation of pH Sensitive Polyacrylic Acid(PAAc) Macroporous Hydrogels in AqueousNaCl Solutions and their Characterization
Y.H, Xue, W.Y. Zhao, S.F. Sun and H. Yu 1999
Effect of Small Addition of Niobium on the Mechanical Properties of FGBA/ BG Duplex PhaseAir Cooling Bainitic Steel
C. Feng and Y.K. Zheng 2003
Microstructure and Electrical Properties of La203-Doped ZnO-Bi203 Based
Varistor Ceramics
D. Xu, X.N. Cheng, M.S. Wang and L.Y. Shi 2007
Mechanical Properties and Ablation Behavior of Machinable ZrB2-SiC-BN Ceramics
H.T. Wu and W.G. Zhang 20 i I
Microstructural Evolution and Mechanical Properties of Powder Hot Extruded
Al-Zn-Mg-Cu AlloyS.Q. Wang, H.S. Yu, Z.Y. Zhang, G.H. Min and H. Yu 2015
Phase Evolution and Sintering Characteristics ofMullite-Based Ceramics Prepared from
Coal Fly Ash, Calcined Bauxite and Ball ClayX. Ma, X. Yao and S.D. Hua 2019
In Situ Observation of the Growing Surface Morphology of KDP Crystals by MicroscopeD.G. Zhong, B. Teng, M. Li, Q.G. Wang, Y.S. Zhao, F. You, H. Xu and S.M. Zhang 2023
Improvement Properties of Recycled Polypropylene by Reinforcement of Coir Fiber
P. Threepopnatkul, C. Kulsetthanchalee, K. Bunmee, N. Kliaklom and
W. Roddouyboon 2027
Detection and Characterization of Fatigue Induced Damage Using Electromechanical
Impedance TechniqueC.K. Sohand Y.Y. Lim 2031
Synthesis and Characterization of Platinum-Containing Ordered Mesoporous Carbon with
High Specific Surface Area
Z.H. Ji, Y.B. Jiang, H. Li, L. Ye, WJ. Han and T. Zhao 2035
Functional Silica Aerogels with High Specific Surface Area: Influence ofPreparationConditions on Structure Properties
L. Ye, W.J. Han, Z.H. Ji, J.D. Hu and T. Zhao 2039
Synthesis and Characterization of Water-Soluble CuJ+-Doped ZnSe Quantum Dots
S.S. Li, F.T. Liu, Q. Wang, X.X. Chen and P. Yang 2043
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra HighPerformance Concrete
M.G. Lee and Y.S. Huang 2047
Pyrolysis Kinetic ofBasic Zinc Carbonate from Spent Catalyst and Preparation of Active
ZnO by Microwave HeatingZ.B. Zhang, Z.Y. Zhang, J.H. Peng, L.B. Zhang, W.W. Qu and W. Li 2051
Preparation and Biological Activity ofCliitosan Fibers Reinforced
PLLA/HA-CaSi03 CompositesJ. Wang, H.B. Li, J. Gao and X.C. Meng 2055
Synthesis and the Characterizations of Structure and Function of Gallic Acid
Macrocrystalline Cellulose Ester
N. Liu, G.Z. Fang and S. Su 2059
Electrical Response and Mechanical Behavior of Plasticized PVC Actuators
H. Xia, T. Ueki and T. Hirai 2063
Effect of Disbond Propagation on the Reflected Spectra of CFBG Sensors Embedded within
the Bondline of Composite Bonded Joints
Y.L. Guo, S.L. Ogin, T.F. Capell, A.M. Thorne, G.T. Reed, Y.S. Wang and S.C. Tjin 2067
Ixxiv Multi-Functional Materials and Structures II
Influence of Zinc-Zirconium Substitution on Magnetic Properties of Ba(ZnZr),Fci2-2xOi» Hexaferrite Prepared by the Molten Salt Method
H.F. Li, R.Z. Gong, X. Wang, L.R. Fan, G. He, M.Z. He and Z.K. Feng 2071
Synthesis, Characterization and Pliotocatalytic Performance of Novel CompositeAg/ BiV04 Photocatalysts
X.H. Zhang and L. Ge 2115
A Study on the Coating of Acupuncture Needle with Bioceramics to ImproveInsulation Performance
M.T. Kim, H.J. Chung, G.S. Choi, Y.B. Kim and ICY. Rhee 2119
Catalyst Assisted Synthesis of Carbon Nanotubes Using the V-Shaped PyrolysisFlame Method
Y.C. Liu, B.M. Sun and Z.Y. Ding 2123
Pliotocatalytic Reduction of Methyl Orange Using Titania Photocatalyst Codoped with
Nitrogen and Gadolinium under Visible Light Illumination
S.T. Gu, X. Wang, Q. Liu, H.Q. Liu, G.J. Jiang and M. Zhou 2127
Preparation of Cuprous Oxide from Industrial Leaching Liquid Using the Microwave
Thermo-Ethanol Method
H.Y. Lin, C.Y. Kuo, C.H. Wu and T.H. Lin 2131
Epoxy Curing System with Liquid l,3-Bis(3-aminopropyl) tetramethyl Disiloxane as CuringAgent for Advanced Electronic Package
H.Y. Li and C.H. Xie 2135
Optimization of Annealing Treatment Parameters in a Twin Roll Cast and Warm Rolled
Mg-4.5Al-l.0Zn AlloyH.M. Chen, H.S. Yu, S.B. Kang and G.H. Min 2139
Advanced Materials Research Vols. 79-82 Ixxv
High Temperature Thermoelectric Properties of Oxide CaaCo205G.J. Li, S.J. Zhao, A. Mei, J.L. Lan and Y.H. Lin 2143
Investigation on the Sound Absorption Properties of MPA/MR
Y.H. Ma, J. Hong, B. Zhu and H. Wang 2147
Effects of Aluminizing on the High Temperature Oxidation Behavior of High Silicon
Cast Iron
M.B. Lin and C.J. Wang 2151
A Facile Method of Surface Modification Based on the Adhesive Behavior of
Poly(dopamine) on CopperY. Chen, H.Y. Zhu, Y.H. Lei, W.W. Sun, Y.P. Liu and S.G. Chen 2155
Fabrication and Electric Properties of SrTi03.5/Nb-SrTi03 HeterjunctionM.C. Ni, Y.H. Wang, H.Y. Li, J.Y. Liu, Z.J. Wang and S.C. Li 2159
Effect of Fluctuation in Fiber Orientation on the Young's Modulus of Green CompositesB. S. Ren, J.J. Noda and K. Goda 2163
Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental ImplantSupported Prosthesis
C. Rungsiyakull, Q. Li, W. Li and M.V. Swain 2167
The Effect of Excess Silane-69 Used for Surface Modification on Cure Characteristic and
Mechanical Properties ofPrecipitated Silica Filled Natural Rubber (PSi/NR)C. Thongpin, C. Sangnil, P. Suerkong, A. Pongpilaiprertti and N. Sombatsompop 2171
Influence of Curing Process on the Performance ofEpoxy Thermosets
B.H. Zhang, J.D. Ye, B. Chen and Y.Q. Weng 2175
Research on the Antifouling Mechanisms of Copper and its AlloysS.D. Ma, X. Zhao, H.R. Wang and J.Z. Duan 2179
The Effect of Second Filler on Cure Characteristic and Mechanical Properties of Si-69
Treated Precipitate Silica/NR CompositeC. Thongpin, C. Sripetdee, N. Papaka, N. Pongsathornviwa and N. Sombatsompop 2183
Study of AMP-Activated Protein Kinase Agonists by Structure-Based Drug DesigningY.H. Chang, T.Y. Ho, C.H. Wu, C.Y. Chen, H.J. Huang, F.J. Tsai, C.H. Tsai and C.Y.C. Chen 2187
Behavior ofHeavy Plastic Deformation of Cu-15Cr-0.1Zr In Situ CompositeY. Li, X.H. Chen, P. Liu, L.H. Gao and B.H. Tian 2191
Effect of Electrode Shape on Power and Internal Resistance in Benthic Microbial Fuel Cell
Material on Marine Sediment
J.H. Li, Y.B. Fu, J. Liu, A.L. Li and D.D. Ma 2195
Tribological Characteristics of Surface Treatment for Piston Pin
J.H. Seo, J.Y. Kim, S.U. Park, H.C. Kim, B.C. Na and D.S. Lim 2199
Synthesis of Crosslinkable Core-Shell Emulsion and Rheology of the Core-Shell/Amine
Crosslinking ProcessJ. Lu, A.J. Easteal, D. Bhattacharyya, C.J. Bolt and N.R. Edmonds 2203
Electronic Structure Study of Metal Complex o-Phenylenebis(nitrilomethylidyne)]di-2-naphtholato} Copper(II)
R.T. Xue, S.G. Chen, G.H. Gao and Y.S. Yin 2207
A Structural Improvement of Breaker Plates and Analysis oftheir Dynamic Properties in
Polymer Tube Extruders
J.H. Choi, S.H. Choi, K.S. Song and J.Y. Kim 2211
Fabrication and Residual Stresses of Aluminum Nitride Ceramics
Sintered at High-PressureX.L. Li, S.S. Li, H.A. Ma and X.P. Jia 2215
Reactive Adsorption of Sulfur Compounds from FCC Gasoline on NiO/y-Al203H.Y. Yin, C.H. Li, L.X. Wang and Y.M. Yu 2219
Ixxvi Multi-Functional Materials and Structures II
Structural Performance of Pultruded Composites under Elevated TemperaturesA.S. Mosallam 2223
A New Process and Structure of Al203/LaP04 CompositesQ.J. Zheng, X. Wang, X.R. Liu and Y.S. Yin 2227
Influence of Calcining Temperature on the Microstructure of LaPO,( Powders
Z.F. Liu, X. Wang, Y.S. Yin and Q. Liu 2231
Molten Salt Synthesis of LaP04:Eu3+Q. Liu, X. Wang, Z.F. Liu, H.Q. Liu, S.T. Gu, T. Jiang and M. Zhou 2235
Influence ofSi Content on the Oxide Scale Formation of Ni-Based AlloyC. Lei, X.C. Li, Z. Ning and Y.S. Yin 2239
Annealing Temperature Effect on Superelastic and Cyclic Response of NiTi SMA
L. Lan, A.K.T. Lau, Y.S. Yin and L. Tong 2243
3D Electromagnetic Simulation Study for the Distribution of Electromagnetic Field of
Microwave Sintering CavityL.X. Chen, C. Lei, Z. Ning, C.S. Jin and Y.S. Yin 2247
Microbiologically Influenced Corrosion of Fe3Al/Zr02 Composites in Marine Environment
X.T. Chang, S.G. Chen and Y.S. Yin 2251
Study on the Formation and Variation of Monodisperse Nano-Sized Polystyrene Beads bySuspension Polymerization with Hydrophilic Polymer as a Stabilizer
J.Y. Moon and M.S. Park 2255
Shape Memory Behavior of Ti-Rich Ti-Ni-Cu Melt-Spun Ribbons
W.J. He, G.H. Min and O.V. Tolochko 2259
Electroresponsive Property of Novel Poly(acrylate- acryloyloxyethyl trimethyl ammonium
chIoride)/Clay Nanocomposite HydrogelsP. Li, N.H. Kim, S. Bhadra and J.H. Lee 2263
Positive Temperature Coefficient Behavior of HDPE/EVA Blends Filled with Carbon Black
Q. Li, O.K. Park and J.H. Lee 2267
Partical Size and Morphology of Zeolite |J Influenced by Various Conditions in the
Hydrothermal SynthesisX.L. Feng, Y.Q. Liu, C.G. Liu, C.Y. Liu and H.P. Wang 2271
Preparation and Properties of TiN Thin Films by D.C. Reactive Magnetron SputteringY.Q. Shan, X.L. Gu and Y.X. Wang 2275
Evaluation of the Degree of Crystallization in Glass-Ceramics by Dielectric
Constant Measurements
Y. Han, S.Y. Yao, H.Q. Sun and W.W. Zhang 2279
Large-scale synthesis of ZnO nanorods by different surfactant-assisted and low-