wireless embedded boards Last Updated: 29/03/2016 Multi-function IPQ4029 Embedded Board with on-board Wireless 638MHz CPU / 5x GE Port / 1x MiniPCI-e / Dual Band 802.11ac Wave 2 Specifications Chipset CPU: Qualcomm Atheros IPQ4029 638MHz System Memory 256MB DDR3 NAND Flash 128MB NOR Flash 16MB Wireless Built-in 2.4GHz 802.11b/g/n at 23dBm (aggregate), 2x U.FL connectors Built-in 5GHz 802.11ac/a/n at 23dBm (aggregate), 2x U.FL connectors Total 4x U.FL connectors Expansion 1x USB 3.0 1x USB 2.0 1x Mini PCI-e slot Interface 5x Gigabit Ethernet Port 1x Serial Port via UART0 12 Pin Connector 1 1x JTAG 20 Pin Connector 2 Reset Button 1x H/W Reset Button 1x S/W Reset Button LED 9x LED Indicators Power Over Ethernet N/A DC Power 1x DC Jack Connector: 12V Power Consumption TBA Operating System QCA Reference Firmware Certification RoHS Compliance Environmental Temperature: Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºC Humidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90% Dimensions (W x D x H) 176 x 129 x 28.5 mm 1.The UART0 Port is a 12-pin header (TTL). A Serial Converter is available to change the TTL signals on the board to RS-232 signals for debugging. 2.The JTAG Port is a 20-pin header. A JTAG kit is for writing your self-developed loader and firmware directly. *Configurations are subject to change without notifications. Model: CPX-DK04 APPLICATIONS • 802.11 ac/a/b/g/n Access Point • Point-to-Point High Capacity Wireless Bridge • Point-to-MultiPoint High Capacity Wireless Bridge • Wireless Base Station • Wireless Customer-Premises Equipment (CPE) KEY FEATURES • Qualcomm Atheros IPQ4029 Quad-core ARM cortex-A7 638MHz CPU • 256MB System Memory • 128MB NAND Flash • 16MB NOR Flash • On-board 2.4GHz max 20dBm output power (per chain) • On-board 5GHz max 20dBm output power (per chain) • IEEE 802.11ac/a/b/g/n compliant • Onboard 2x2 5GHz radio, up to 867Mbps physical data rate • Onboard 2x2 2.4GHz radio, up to 300Mbps physical data rate
4
Embed
Multi-function IPQ4029 Embedded Board with on-board ... · QCA Reference Firmware IPQ4029 DC: 12 V US JTAG Programmer JTAG 20 Pin to Parallel Port bridge Serial Port Converter Serial
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
wireless embedded boards
Last Updated: 29/03/2016
Multi-function IPQ4029 Embedded Board with on-board Wireless638MHz CPU / 5x GE Port / 1x MiniPCI-e / Dual Band 802.11ac Wave 2
Environmental Temperature: Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºCHumidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90%
Dimensions (W x D x H) 176 x 129 x 28.5 mm1.The UART0 Port is a 12-pin header (TTL). A Serial Converter is available to change the TTL signals on the board to RS-232 signals for debugging.
2.The JTAG Port is a 20-pin header. A JTAG kit is for writing your self-developed loader and firmware directly.
*Configurations are subject to change without notifications.
Model: CPX-DK04
APPLICATIONS
• 802.11 ac/a/b/g/n Access Point
• Point-to-Point High Capacity Wireless Bridge
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Base Station
• Wireless Customer-Premises Equipment (CPE)
KEY FEATURES
• Qualcomm Atheros IPQ4029 Quad-core ARM cortex-A7
638MHz CPU
• 256MB System Memory
• 128MB NAND Flash
• 16MB NOR Flash
• On-board 2.4GHz max 20dBm output power (per chain)
• On-board 5GHz max 20dBm output power (per chain)
• IEEE 802.11ac/a/b/g/n compliant
• Onboard 2x2 5GHz radio, up to 867Mbps physical data rate
• Onboard 2x2 2.4GHz radio, up to 300Mbps physical data rate
2
wireless embedded boards
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | [email protected] | Last Updated: 29/03/2016 WH JK HB