-
www.resemin.com
MUKI LHBPProduction long hole rig for small section
MUKI LHBP is an electro-hydraulic rig for long hole drilling, it
has an hydraulic boom, 3AP model, with parallel holding.
Long hole drilling feed 2500 series with 2 Stingers and
hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW).
Full 360°, horizontal coverage with parallel holding is 2.45 m;
maximum length of drilling up to 15 m, diameters up to 74 mm bit,
Reamer 127 mm.
Chassis for heavy duty application, articulated 4WD,
self-propelled with diesel, electro hydraulic system for
drilling.
Applications:
• Sub Level Caving, benching• Sub Level Stoping• VCR and cable
bolting
-
www.resemin.com
Muki LHBP Technical specifications
SPECIFICATIONS
DRIFTER• Model• Percussion Power• Percussion pressure• Frequency
Percussion• Rotation speed• Rotation Torque• Hole diameter• Lub air
consumption• Lub oil consumption• Water consumption• Shank Adapter•
Weight• Length with shank
Montabert HC5013 kW
130 Bar62 Hz
0 - 195 rpm415 Nm
33 - 64 mm83.3 l/s (to 2.5 bar)
0.8 cc/min25 l/min (to 8 bar)
R32 Female102 kg
855 mm
FEED• Model• Advance drilling• Feed extension• Hydraulic clamp•
Standard Feed• Options• Two Stinger to stabilize while
drilling• Digital inclinometer for measuring
angles
CARRIER• Model• Diesel Engine• Power• Exhaust catalyst•
Transmission• Hydrostactic pump• Positioning pump• Rear axle
Oscillating• Service brakes• Emergency and parking brakes
• Tyres• Steering (articulated carrier)• Hydraulic jacks •
Battery• Electric system• Gradeability • Canopy• Tramming
lights
• Centralized Lubrication System• Drilling Lubrication System•
Automatic fire suppression
system• Fire extinguisher• High-pressure washing system• Reel
grease gun
C22.1
Deutz BF4L201155,1 kW @ 2300 rpm
StandardHydrostatic
Poclain, MSE 08Rexroth
± 8°Separate
SAHR (Spring Applied Hydraulic Release)
7.50 x R15±38°
2 extendable front2x12 V, 90 Ah
24 VDC15%
FOPS / ROPS8X, LED N44, 50W,
6700 lm, 24 VSKFSKF
ANSUL, 6 nozzles 1x5 lb, Type ABC
RE 2500 Series
Hydraulic motor and chain400 mmBull 1214 ft rods
3, 5 ft rods
Transtronic
HC 50 MONTABERT DRIFTER
STINGER (1)
STINGER (2)
DEUTZ ENGINE BF4L2011
BOOM 3AP-R
HYDRAULIC CLAMP
TYRES 7.50 X R15
-
www.resemin.com
Muki LHBP Technical specifications
BOOM• Model• Automatic parallelism• Boom Extension• Angle lift•
Swing angle• Rotation angle• Hydraulic cylinders
Boom 3 AP - R
700 mm+65°/ -20°
± 30°360°
Parker
HYDRAULIC CONTROL SYSTEM• Direct Control Valve• Percussion pump
(compensated
pressure)• Rotation Pump • Work pressure• Hydraulic oil tank•
Hydraulic return filter• Hydraulic high filter • Saturation
hydraulic filter
indicator • Indicator of low oil• Indicator temperature oil
WATER AND AIR SYSTEM• Compressor• Maximum capacity• Work
pressure• Water pump with hydraulic
motor• Maximum flow at 8 Bar• Minimum inlet pressure• Cooler
Thermal Transfer
AC - LE3 3-10 UV5.1 l/s (10.8 cfm)
3 Bar
Grundfoss, CR5 - 96.9 m3/h
2 BarEK 1018T, 80 GPM, 34 Bar
Parker K18
Rexroth A10V071Parker, P315 A
180 bar130 l
Parker, 10µParker, 20µ
ParkerHydacHydac
ELECTRIC SYSTEM• Electric motor• Voltage• Frecuency• Starting
method• Option to 1000 VAC• Overload protection and
ground fault• Percussion hour meter• Phase sequence indicator•
Battery charger• Electric transformer• Work Lights• Electric wire
reel• Electric wire• Protection degree
ABB - 55kW (75 HP)
380 - 440 - 550 - 690 -1000 VAC50 - 60 Hz
Star - DeltaDirect start
Schneider, Module VIGIIn the control panel
Siemens32 VAC, 300W, 13A
1.5 kVA2X, LED N44, 50W, 6700 lm, 24 V
60 mGGC - 3X2 - AWG (35 mm)
IP 55
BARICENTER SYSTEM• Shorter times for Boom positioning since both
drilling and
rotation axis are syncronized.• Enables to use only two
Trasducers for Digital Inclinometer
instead of five from competitors.• Speeds up the operation and
productivity of the machine.
-
www.resemin.com
Muki LHBP Technical specifications
DIMENSIONS
Rev
. 160
606
©
Cop
yrig
ht 2
016
RE
SE
MIN
. Spe
cific
atio
ns a
nd e
quip
men
t are
sub
ject
to c
hang
e w
ithou
t fur
ther
not
ice.
Total Weight 7,380 Kg.
COVERAGE AREA TURN RADIO