This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 5 (Rev. 12/2021)
SCBSMFL_SS_v1.2In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
GALV Hot Dip Galvanized Finish (Structural SteelCore Only)
Page 2 of 5 (Rev. 12/2021)
SCBSMFL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Luminaire Cover - Diecast, aluminum cover, with smooth crisp form to reflect and complement the column design. Removes by loosening four stainless steel screws for easy access to LED chamber.
Gasketing - Continuous gaskets provide weather-proofing, dust, and insect control at shielding base, fixture cover and between MTR rings.
Shielding - Consists of 8” (200mm) square injection-molded acrylic multi-prisms for total reflection (MTR). MTR rings have a wall thickness of .591” and are patterned after the light- bending characteristics of a prism.
LED Light Engine - High efficiency LED light engine equipped with brand-name LEDs, available in 2700K, 3000K, 3500K, or 4000K CCT. Tolerance within a 3-step MacAdam ellipse. 90+ CRI standard.
Diffuser - LED optimized UV resistant material ensures evenly lit MTR rings at high transmittance.
Bollard Fitter - Die-cast aluminum fitter, with built-in gasketing ridges, for smooth transition to bollard shaft.
Surge Protector - Designed to protect luminaire from electrical surge (20kA).
SteelCore - Ø6-5/8” (OD) structural steel tube filled with rebar and concrete. Certified to ASTM Standard F2656 (C40-P1) ≤3.3’ penetration for 2,430lb Small Passenger Car traveling at 40mph. Meets requirements for ASTM Standard F3016/F3016M (S30-P1) ≤1’ penetration for 5,000lb Vehicle traveling at 30mph. Optional hot dip galvanized finish available for additional corrosion protection in challenging environments.
Footing (by others) - (by others) 30” cubic footing constructed with minimum 4,000 PSI concrete. One or two rigid metal or PVC conduit up to 1” trade size for wiring. Consider local soil conditions and consult structural engineer to confirm foundation detail for construction on site.
Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultraviolet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI.Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the MTR Bollard LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED array when installed and operated according to Selux instructions. For details, see “Selux Terms and Condition of Sale.”Listings and Ratings: Tested to NRTL Wet Location and IESNA LM-79-08 standards. LED tested to LM-80 standards. Luminaire and LED tested at 25°C (77°F) ambient temperature.
NRTL Listed for Wet Location (i.e. UL, CSA)
Visit selux.us for our LED End of Life recycling policy.
Specifications
8” diameter bollard sleeve
SteelCore and footing details
(refer to page 4)
Conduit (by others):Maximum 2x 1” trade size
Ø 7 7/8” (200mm)
Ø 7 7/8” (200mm)
4” x 7” hand hole provided with flush cover and stainless steel tamper-resistant hardware
12 1/8” (308mm)
2 3/16” (56mm)
Illuminated Head
Masonry blocks(1.5” max. height)
SCSBSMFL
Page 3 of 5 (Rev. 12/2021)
SCBSMFL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Masonry blocks (1.5” max. height) to elevate bollard off subgrade (by others)
□30” (716mm)
□30” (716mm)
Conduit (by others): Maximum 2x 1” trade size
Note: Refer to SteelCore installation instructions for further details (available on Selux website).
Existing site material (varies by site)
Optional 2nd conduit (by others) to
next fixture
Ø16” (406mm)
Rebar (included with SSC-36)
4000 PSI Concrete poured to fill SteelCore (by others)
*Note Critical Dimension: Top of SteelCore 36” +0”/-.5” to finished grade.
36” (914mm)
max. 34” (889mm)
Concrete Fill
Page 4 of 5 (Rev. 12/2021)
SCBSMFL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Standard Wiring (120V-277V)**When dimming is not required cap dimming wires.
L1
N /L2
DIM(+)
DIM(-)
LIGHTENGINE
0-10Vdimming leads
SURGEPROTECTOR
BLACK
WHITE / RED
BARE
VIOLET **
PINK **
FROMLINECORD
Wire Designation Table
Source Voltage (VAC) Wire Color Wire Designation
UNV(120V-277V)
Black L1
White Neutral (120/277V) or L2 (208/240V)
Page 5 of 5 (Rev. 12/2021)
SCBSMFL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Catalog #: BSMFL-X-4B30-30-XX• Maximum candela of 246 at 57.5° from vertical • BUG Rating - B1-U4-G1• 2082 Delivered Lumens• 26 Input Watts• 78 Lumens per Watt
SBSMFL / 1B30 / 3000K CCT
Catalog #: BSMFL-X-1B30-30-XX-UNV• Maximum candela of 145 at 65° from vertical• Bug Rating - B0-U3-G1• 498 Delivered Lumens• 7 Input Watts• 71 Lumens per Watt