RFI Modular Sleep System Packing Instructions 1) Begin by placing the Intermediate bag in the Patrol bag, then both bags in the Bivy cover. 2) Starting from the foot end, tightly roll up the three bags and place them into the large stuff sack, then pulling the draw cord secure the top of the bag (see figure 1). 3) Tighten the horizontal straps making sure the bag is evenly distributed in the stuff sack (see Figure 2). 4) Place the top cover over the top of the stuff sack and attach the compression straps using the buckles (see figure 3). 5) Pull the compression straps evenly until the bag is at the desired size (see figure 4). * Placing your knee on top of the bag while pulling the compression straps helps to force more air out allowing for greater compression. Figure 1 Figure 2 Figure 3 Figure 4
MSS Packing Instructions
Dec 27, 2015
Military Sleep System Packing instructions
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RFI Modular Sleep System Packing Instructions
1) Begin by placing the Intermediate bag in the Patrol bag, then both bags in the Bivy cover.
2) Starting from the foot end, tightly roll up the three bags and place them into the large stuff sack, then pulling the draw cord secure the top of the bag (see figure 1).
3) Tighten the horizontal straps making sure the bag is evenly distributed in the stuff sack (see Figure 2).
4) Place the top cover over the top of the stuff sack and attach the compression straps using the buckles (see figure 3).
5) Pull the compression straps evenly until the bag is at the desired size (see figure 4). * Placing your knee on top of the bag while pulling the compression straps helps to force more air out allowing for greater compression.
Figure 1 Figure 2
Figure 3 Figure 4
Related Documents
