QUALITY • Fans and motors specially selected for quietness • Hot gas heated drain pans for positive condensate drainage • UL & C-UL listed, NSF-approved • Fan guards exceed OSHA requirements SERVICEABILITY • Removable end panels for easy access • Separate fixed defrost and fan delay control factory wired and mounted for optimum performance of each control. EFFICIENT OPERATION • 4 FPI • Available with PSC or EC motors • Motor bearings are lubricated for the life of the motor • Motors have built-in overload protection • Coils constructed of Copper tubes and Aluminum fins Features: Nomenclature: MEDIUM SILHOUETTE MODEL - FPI 4 HOT GAS DEFROST MOTOR CODE: E = Electronically Commutated Motor P = Perm. Split Cap. VOLTAGE CODE: D = 208-230/1/60 E = 208-230/3/60 F = 460/1/60 HG CODE: T = Thermobank R = Reverse Cycle MSG 140 * E P BTUH IN HUNDREDS Catalog KM-MSG-1014A MSG model unit coolers are specifically designed for commercial freezer applications. All MSG models are available for either “Thermobank” or Reverse Cycle Hot Gas Defrost application. The time proven “Thermobank” defrost takes less time to defrost than other systems and helps keep room temperatures at design conditions.These units are suitable for low or medium temperature rooms in the range of +30°F to -20°F. The draw-thru air flow design coupled with fin spacing of 4 per inch assures uniform air distribution. MSG Series MSG Medium Silhouette Hot Gas Defrost Removable end panels allow easy access to refrigerant and electrical connections. There is ample room within the end compartment for mounting the expansion valve.
2
Embed
MSG Series - Amazon S3€¦ · MSG 140 * E P BTUH IN HUNDREDS Catalog KM-MSG-1014A MSG model unit coolers are specifically designed for commercial freezer applications. All MSG models
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
QUALITY• Fans and motors specially selected for quietness• Hot gas heated drain pans for positive condensate drainage• UL & C-UL listed, NSF-approved• Fan guards exceed OSHA requirementsSERVICEABILITY• Removable end panels for easy access• Separate fixed defrost and fan delay control factory wired and mounted for optimum performance of each control.
EFFICIENT OPERATION• 4 FPI • Available with PSC or EC motors• Motor bearings are lubricated for the life of the motor• Motors have built-in overload protection• Coils constructed of Copper tubes and Aluminum fins
Features:
Nomenclature:
MEDIUM SILHOUETTEMODEL - FPI 4
HOT GAS DEFROST
MOTOR CODE: E = Electronically Commutated Motor P = Perm. Split Cap.
VOLTAGE CODE: D = 208-230/1/60 E = 208-230/3/60 F = 460/1/60
HG CODE: T = Thermobank
R = Reverse Cycle
MSG 140 * E P
BTUH IN HUNDREDS
Catalog KM-MSG-1014A
MSG model unit coolers are specifically designed forcommercial freezer applications. All MSG models areavailable for either “Thermobank” or Reverse CycleHot Gas Defrost application.
The time proven “Thermobank” defrost takes lesstime to defrost than other systems and helps keep room temperatures at design conditions.These units are suitable for low or medium temperaturerooms in the range of +30°F to -20°F.
The draw-thru air flow design coupled with fin spacingof 4 per inch assures uniform air distribution.
MSG Series
MSG Medium SilhouetteHot Gas Defrost
Removable end panels allow easy access to refrigerant and electrical connections. There is ample room within the end compartment for mounting the expansion valve.
Physical Data
Electrical Data
MSG Evaporators
Energy Savings per Motor
*Add 1-3/4" to height of the drain end. *Add 2-1/4" to height of the drain end.
Fig. 1
*
Fig. 2
(4) All motors are high efficiency Permanent Split Capacitor (PSC) or Electronically Commutated (EC) motors and have built in thermal overload protection.
Specifications, weights and dimensions subject to change without notice.
Achieved by Changing to More Efficient Unit Cooler Motors (Based on Energy Cost of $0.10 per kWh)
1123 Church St. Covington GA. PHONE (770) 788 - 5800 FAX (770) 788 - 5820 kramer.htpgusa.comSpecifications, weights and dimensions subject to change without notice.
AMSG-105* MSG-140* MSG-175*
111
424263
120135285
MSG-230* MSG-325*
22
6363
315350
MSG-390* MSG-510*
22
9393
435530
HX-250 HX-350HX-350 HX-500
MODELNO. FIG. DIMENSIONS (INCHES) FITTINGS - OD APPROX.
WT.H W D B C LIQ. SUCT. DRAIN191919
555576
18 3/418 3/418 3/4
151515
———
1/21/21/2
1 1/81 1/81 1/8
3/43/43/4
HX-150 HX-150 HX-150
2525
106106
2020
1616
3131
7/87/8
1 5/81 5/8
3/43/4
2525
7676
2020
1616
31½31½
1/27/8
1 3/81 3/8
3/43/4
OPTIONALHEAT EXCH.
PSC ECMMSG-105* MSG-140*MSG-175*
282282423
140140210
MSG-230*MSG-325*
714714
450450
MSG-390* MSG-510*
10711071
675675
TOTAL MOTOR WATTS
33
1/31/3
21.321.3
9.09.0
9.69.6
6.36.3
3.93.9
N/A N/A
22
1/31/3
14.214.2
6.06.0
6.46.4
4.24.2
2.62.6
N/AN/A
223
1/81/81/8
4.04.06.0
2.42.43.6
1.81.82.7
1.21.21.8
1.01.01.5
N/A N/AN/A
MODEL NO. MOTOR (4) TOTAL MOTOR AMPS115/1 208-230/1/60 460/1/60
(1) T.D. is the difference between the box temperature and the refrigerant temperature.(2) Asterisk designates Hot Gas Defrost piping arrangement.(3) Unrestricted flow (50 - 60 ft). High throw fan guards available as an option.