Product Part No. V-Gard® Slotted Cap V-Gard Non-Slotted Hat SmoothDome® Slotted Cap Advance® Slotted Cap Topgard® Slotted Cap Topgard Non-Slotted Hat Thermal-E™/ Thermalgard® Slotted Cap Skullgard® Non-Slotted Cap Skullgard Non-Slotted Hat Vanguard™ Slotted Cap Super-V®/ Large V-Gard Slotted Cap Bump Cap Seasonal Accessories Sunshade, Hi Viz yellow-green fabric with reflective striping 10098032 Sunshade, Hi Viz orange fabric with reflective striping 10098031 Sun Shield 697290 Sun Shield 697410 Sun Shield 10039114 Sun Shield 697373 Stretch Winter Liner 695350 Regular Zero Hood® Liner 86092 Extended-neck Zero Hood Liner 88587 Flame-retardant Zero Hood Liner 802439 Flame-resistant Zero Hood Liner (w/ velcro closure) 696473 Zero Hood Liner (w/ zipper) 10087241 Knit Cap Liner 34929 Economy Liner 697116 Standard Winter Liner 697117 Custom Terri-band Sweatband (single) 10068911 Custom Terri-band Sweatband (pkg of 10) 696688 Necessities Chinstrap, plastic (attaches to shell) 88128 Chinstrap, plastic (attaches to suspension) 81391 Chinstrap, Nomex® with nylon hooks (attaches to shell) 10003127 Chinstrap, plastic (two-point) 804630 Chinstrap, plastic (three-point) 804629 Goggle Retainer for caps (excludes goggles) 459458 Goggle Retainer for hats (excludes goggles) 449895 Medical Information Carrier System (pkg of 10) 10013393 Versalite helmet light with 2 AA alkaline batteries 679259† Stealthlite helmet light 697261‡ Light holder for slotted cap 814322 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com MSA Hard Hat Accessories Compatibility Chart 118 †Versalite helmet light does not include, but requires light holder ‡Stealthlite helmet light does not include, but requires light holder and battery
10
Embed
MSA Hard Hat Accessories Compatibility Chart€¦ · All MSA Faceshield Assemblies and Visors meet or exceed applicable requirements of ANSI/ISEA Z87.1. MSA Hard Hat Accessories Compatibility
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Prod
uct
Part
No.
V-G
ard®
Sl
otte
d Ca
p
V-G
ard
Non
-Slo
tted
H
at
Smoo
thDo
me®
Slot
ted
Cap
Adva
nce®
Sl
otte
d Ca
p
Topg
ard®
Sl
otte
d Ca
p
Topg
ard
Non
-Slo
tted
H
at
Ther
mal
-E™
/Th
erm
alga
rd®
Slot
ted
Cap
Skul
lgar
d®
Non
-Slo
tted
Ca
p
Skul
lgar
d N
on-S
lott
ed
Hat
Vang
uard
™
Slot
ted
Cap
Supe
r-V®
/La
rge
V-G
ard
Slot
ted
Cap
Bum
pCa
p
Seas
onal
Acc
esso
ries
Suns
hade
, Hi V
iz y
ello
w-g
reen
fabr
ic w
ith re
flect
ive
strip
ing
1009
8032
Suns
hade
, Hi V
iz o
rang
e fa
bric
with
refle
ctiv
e st
ripin
g10
0980
31
Sun
Shie
ld69
7290
Sun
Shie
ld69
7410
Sun
Shie
ld10
0391
14
Sun
Shie
ld69
7373
Stre
tch
Win
ter L
iner
6953
50
Regu
lar Z
ero
Hood
® Li
ner
8609
2
Exte
nded
-nec
k Ze
ro H
ood
Line
r88
587
Flam
e-re
tard
ant Z
ero
Hood
Lin
er80
2439
Flam
e-re
sista
nt Z
ero
Hood
Lin
er (w
/ vel
cro
clos
ure)
6964
73
Zero
Hoo
d Li
ner (
w/ z
ippe
r)10
0872
41
Knit
Cap
Line
r34
929
Econ
omy
Line
r69
7116
Stan
dard
Win
ter L
iner
6971
17
Cust
om Te
rri-b
and
Swea
tban
d (s
ingl
e)10
0689
11
Cust
om Te
rri-b
and
Swea
tban
d (p
kg o
f 10)
6966
88
Nec
essi
ties
Chin
stra
p, p
last
ic (a
ttac
hes t
o sh
ell)
8812
8
Chin
stra
p, p
last
ic (a
ttac
hes t
o su
spen
sion)
8139
1
Chin
stra
p, N
omex
® w
ith n
ylon
hoo
ks (a
ttac
hes t
o sh
ell)
1000
3127
Chin
stra
p, p
last
ic (t
wo-
poin
t)80
4630
Chin
stra
p, p
last
ic (t
hree
-poi
nt)
8046
29
Gogg
le R
etai
ner f
or c
aps (
excl
udes
gog
gles
)45
9458
Gogg
le R
etai
ner f
or h
ats (
excl
udes
gog
gles
)44
9895
Med
ical
Info
rmat
ion
Carr
ier S
yste
m (p
kg o
f 10)
1001
3393
Vers
alite
hel
met
ligh
t with
2 A
A al
kalin
e ba
tter
ies
6792
59†
Stea
lthlit
e he
lmet
ligh
t69
7261
‡
Ligh
t hol
der f
or sl
otte
d ca
p81
4322
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Cust
omer
Ser
vice
Cen
ter:
1-80
0-M
SA-2
222
• W
ebsi
te: w
ww
.MSA
net.c
om
MS
A H
ard
Hat
Acc
esso
ries C
ompa
tibili
ty C
hart
118
†Ver
salit
e he
lmet
ligh
t doe
s not
incl
ude,
but
requ
ires l
ight
hol
der
‡S
teal
thlit
e he
lmet
ligh
t doe
s not
incl
ude,
but
requ
ires l
ight
hol
der a
nd b
atte
ry
119
Head, Eye, Face and Hearing Protection
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Accessories for Protective Caps and HatsFrames for Faceshields
Defender® + and Defender + Easy Release Faceshield Frames
Easy Release Framewith visor and XLSHearing Protection
• Front drip-edge splash protection• Multiple stop positions• Long-lasting, O-ring, pivot-joint design• Easy-in, easy-out visor replacement• Cap lockdown clip option available (V-Gard, Topgard, Thermalgard and SmoothDome Caps only)
The Defender + Easy Releaseis designed so the faceshieldframe can be easily removedby the user without having totake off their hat or cap.
Must be used with any model MSA ear muffs for slotted caps or the slot adapter (listed below)
Defender+ Easy Release Frame for most MSA slotted caps, with lockdown clip, black 10080783
Defender+ Easy Release Frame for Topgard Cap, with lockdown clip, black 10080784
Non-locking Defender+ Easy Release Frame, black 10080785
Defender+ Easy Release Frame for most MSA slotted caps, with lockdown clip, Hi-viz orange 10080786
Slot adapter, attaches Easy Release Frame directly to cap (without ear muffs) 10090221
*Meets CSA Z94.3.
All faceshield assemblies must be worn with eye protection that meets ANSI/ISEA Z87.1 impact requirements.
ApprovalsAll MSA Faceshield Assemblies and Visors meet or exceed applicable requirements of ANSI/ISEA Z87.1.
MSA Hard Hat Accessories Compatibility Chart!
Our Compatibility Chart can help you select the right MSA accessories to customize your cap orhat. For more information, see pp.117–118.
Head, Eye, Face and Hearing Protection
120 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Do not use metal Universal Foldback Faceshield Frames in electricalapplications. Failure to follow this warning can result in serious injury or death.
Defender® + Foldback Universal Faceshield Frames
Plastic Defender +Foldback FaceshieldFrame (Cap)
Metal Defender + FoldbackFaceshield Frames (Cap)
Foldback Faceshield Frames are available in plastic (dielectric) and metal for MSA caps and hats. These frames can be used with slotted or non-slotted helmets.
Defender + Headgear with Ratchet andExtended High-Temp Sparkgard
For use where no hardhat is required. Defender + Headgear for Faceshieldsare available in three versions and all adjust to head sizes 6 1/2 to 8. The extendedelevated temperature Sparkgard is for use in temperatures up to 250°F.
Defender + Headgear with Faceshieldand Chinguard (Nitrometer)
ApprovalsAll MSA Headgear for faceshields meet the applicable requirements of ANSI/ISEA Z87.1.
All Headgear for faceshields must be worn with eye protection that meetsANSI/ISEA Z87.1 impact requirements.
Defender + Headgear for Faceshields (excludes for visors and chinguards)Defender + Headgear, standard Sparkgard, pin-lock suspension 10021610
Defender + Headgear, standard Sparkgard, ratchet suspension 10021611*
Accessories for Protective Caps and HatsFrames and Headgear for Faceshields
Plastic Defender +FoldbackFaceshield Frame (Hat)
121
Head, Eye, Face and Hearing Protection
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Accessories for Protective Caps and HatsVisors, Chinguards, Nitrometers
Do not use MSA visors for welding, elevated temperature applications, or for protection againstother infrared radiation sources unless the MSA visoris approved for such applications. Do not use forsports, simulated war games, paintball games, orsimilar activities. A pitted or scratched visor reduceseye protection and vision. Inspect routinely andreplace worn or damaged parts immediately. Do notalter or modify this product. Do not use near openflame. Failure to follow these warnings can result inpermanent impairment of sight, other seriouspersonal injury, or death.
Choose from a wide variety of visors that fit MSAfaceshield frames. MSA visors are manufacturedfor use ONLY on MSA frames and assemblies inorder to comply with ANSI /ISEA Z87.1.
Visors should always be worn with eye protection,such as goggles or spectacles, that meet ANSI/ISEAZ87.1 requirements for high impact. Visors should be inspected frequently and replaced immediately if worn, scratched, or damaged in any way. Selection of proper models for specific hazards and communication of all instructions, precautions,and limitations to the wearer is the responsibility of user safety specialists, who are also responsible to see that they are strictly observed. Failure tocomply with any of the above could result in serious injury or death.
ApprovalsExcept as noted, MSA visors meet or exceed impactrequirements of ANSI/ISEA Z87.1.
Clean visor with mild soap and water only. Cleaningdry or with coarse cloth will scratch the visor.
MSA Visors
*Meets CSA Z94.3.
VisorsPolycarbonate Visors Size (inches) Part No.
Clear (Molded) 10 x 20 x.060 10063106
Clear (Formed) 8 x 16 x .040 488131
Clear (Formed) 8 x 16 x .060 488132
Clear (Flat) 8 x 151/2 x .040 10017934*
Clear (Formed) 8 x 19 x .060 488138
Clear (Formed) 6 x 16 x .060 491908
Clear (Fog-free) 8 x 16 x .040 802337
Propionate Visors (Molded) Size (inches) Part No.
Clear 8 x 151/2 x .060 10005883*
Clear 91/2 x 191/2 x .060 10087000
Medium green 8 x 151/2 x .060 10086994
Dark Green 8 x 151/2 x .060 10005885
Dark Green 91/2 x 191/2 x .060 10086998
Shade 3 (Green) – ANSI/ISEA Z87.1 basic, non-impact protector 8 x 151/2 x .060 10086996
Shade 5 (Green) – ANSI/ISEA Z87.1 basic, non-impact protector 8 x 151/2 x .060 10005882
Nitrometer Visors and ChinguardsVisors Size (inches) Part No.
Clear polycarbonate (Formed) 6 x 16 x .040 488126
Clear polycarbonate (Formed, Fog-free) 8 x 19 x .060 494916
Shade 5 Green, propionate – ANSI/ISEA Z87.1 basic, non-impact protector(Molded, must be worn with chinguard) 61/2 x 151/2 x .060 10005881
Chinguards (for Nitrometer Visors) Part No.
Clear polycarbonate 10022241
Black polypropylene 10022242
Chinguard, Black polycarbonate (use ONLY with P/N 10005881) 10013631
Wire Screen Visors Size (inches) Part No.
Plastic edge, 20 mesh (not for use in elevated temperatures)–ANSI/ISEA Z87.1 basic, non-impact protector 61/2 x 14 476356
Aluminum edge, 20 mesh (Flat, not for use in areas where splash mayoccur)– ANSI/ISEA Z87.1 basic, non-impact protector 8 x 171/2 457409
Arc Shield Visors Size (inches) Part No.
For protection from electric arcing. Call for protection level. Meets ANSI/ISEA Z87.1 and NFPA 70E 2009, Classes 1 & 2.
Tinted (light green/brown) – HIGH IMPACT, 8 Cal/cm2 – propionate (Molded) 10 x 20 x .060 10006024*
Tinted (light green/brown) complete with chinguard, ANSI/ISEA Z87.1basic, non-impact protector, 11 Cal – propionate (Molded) 6 x 20 x .060 10063107
Elevated-Temperature Visors Size (inches) Part No.
Clear, polycarbonate (Molded), with gold coating 91/2 x 20 x .070 10005879
Clear, polycarbonate (Molded), with 4" gradient-tinted strip 93/4 x 181/2 x .060 10090325
Medium Green, polycarbonate (molded), with gold coating 91/2 x 20 x .070 10005880
Basic, non-impact visors should never be used where an "Impact Protector" is required. A hazardassessment should always be done before usingbasic, non-impact protectors.
Head, Eye, Face and Hearing Protection
Accessories for Protective Caps and HatsWelding Adapter Kits
122 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Plastic Instant-Releasefor Welding Helmet
Adapter Kits for Welding Shields and Defender + AssemblyKits permit the easy attachment of Welding Shields and SparkgardFaceshields with visors to MSA’s helmets.
Defender + Faceshield Framewith Instant-Release
Welding Adapter KitsStandard Adapter for Welding Helmets and Sparkgards 488525
EC Adapter Kit (positive positioning type) 806211
Sparkgard only 456568
Plastic Instant-Release Attachment*Instant-Release for slotted caps, with lugs 10036456
Instant-Release for slotted caps, without lugs 10039111
*Note: Cannot be used on Vented Advance Caps.
Defender+ Frame with Instant-Release AttachmentDefender + frame for slotted cap, without lock-down 10037098
Metal Instant-Release AttachmentInstant-Release and lugs for slotted caps (A, B, C, D, E, F, H) 485460
Lugs only, for instant-release slotted caps (H) 468771
Instant-Release and lugs for non-slotted caps, with stop (A, B, C, D, E, F, G) 91385
Lugs only, for instant-release non-slotted caps (G) 48733
Instant-release, with stop, less lugs (A, B, C, D, E, F) 456667
Friction joints, pair (A, D, E, F) 93631
Metal Instant-ReleaseAttachment
EC Adapter (left) and Sparkgard(right)—use plastic or metal Instant-Release with Sparkgard
ABCDF
GH
E
Welding Shields and Accessories
Welding Shields—Fronts OnlyLess headgear and attachments
Plate Size 2" x 41/4" Part No.
Non-coated black, slim-line, lift front 695943
Non-coated black, full-curved, lift front 695946
Coated silver, slim-line, coated lift front 695941
Plate Size 41/2" x 51/4" Part No.
Coated silver, slim-line, fixed front 695888
MSA’s thermal plastic welding shields protect workers eyes and face from infrared burns, flying sparks,hot metal spatter and chips encountered in welding operations. The nylon welding shields come in avariety of styles.
For shade 5 welding visors, see p. 121.
For shade 5 welding spectacles, see p. 134.
Sightgard Welding PlatesPolycarbonate Plates
Meet ANSI/ISEA Z87.1
Plate Size (in.) Shade Part No.
2 x 41/4 5 791923
2 x 41/4 10 791928
2 x 41/4 12 791930
41/2 x 51/4 10 38347
41/2 x 51/4 12 38277
Polycarbonate Cover/Back PlatesPlate Size (in.) Shade Part No.
2 x 41/4 clear 791933
41/2 x 51/4 clear 696095
123
Head, Eye, Face and Hearing Protection
Accessories for Protective Caps and HatsSeasonal
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Sun ShieldsOur Sun Shield extends the brim all the way around to help protect wearer’s ears andneck from sun’s rays. Made of polyurethane (front portion is Lexan, smoke tint).
V-Gard Sun Shield Topgard Sun Shield
Sun ShieldsSun Shield for Standard V-Gard Cap only 697290
Sun Shield for V-Gard and Topgard Hats only 697410
SunShadesSunShade, Yellow-Green, with reflective striping 10098032
SunShade, Orange, with reflective striping 10098031
SunShade Hard Hat AccessoryMSA’s SunShades not only help to protect wearer’s ears and neck from sun and heat,but also enhance worker visibility with contrasting color band and reflective striping.Fit most hats and caps.
With our SunShades, your customers could be cool and comfortable on the job, even in sun and heat. Features include:• Breathable, high-visibility mesh fabric• Choice of high-visibility yellow-lime or orange colors • Hat clips help to keep SunShade from falling or rotating • Comes complete with packaging and scannable UPC-A barcode
Custom Terri-Band SweatbandCustom design fits all MSA helmets. Washable, with plastic snaps.
MSA Hard Hat Accessories Compatibility Chart!Our Compatibility Chart can help you select the right MSA accessories to customize your cap or hat. For more information, see pp.117–118.
Head, Eye, Face and Hearing Protection
124 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Accessories for Protective Caps and HatsSeasonalWinter Liners
Regular Zero Hood® LinerOne-piece, two-ply winter liner—Velcroad just able chinstrap and no metal parts
86092
Extended-neck Zero Hood LinerOne-piece, two-ply winter liner; extendedneck tucks into coat or jacket collar; non- me tal lic Velcro-adjustable chinstrap
88587
Flame-retardant Zero HoodLinerFor use in high-heat areas or aroundflames; durable flame-retardant cottonwith Nomex binding and chinstrap; doesnot contain any metal parts. Meets FedSpec #191 Method 5903
802439
Flame-resistant two-piece Velcro closure Zero Hood LinerNo metal parts; the two pieces are joinedby non- me tal lic Velcro closures; knit earlugs with Velcro closure
696473
Zipper-type Zero Hood LinerTwo-button front, ribbed-knit neckpiece at-taches by metal zipper to crownpiece; knitear lugs will fit over noise-attenuating earmuffs. [Caution: Liners that contain metal parts will have an effect on electric classifications.]
10087241
Knit Cap LinerNo chinstrap or other attachment; made ofOrlon material [Caution: Should not beused around open flames, sparks or moltenmetal.]
34929
Stretch Winter LinerMounts over the brim of a hard hat but canbe adjusted to cover the neck and ears;made of Orlon material. [Caution: Shouldnot be used around open flames, sparks ormolten metal.]
Standard Winter LinerUniversal size. Two-ply liner with flame-resistant shell; soft lining; adjustable Velcro chinstrap; and three-button loop straps
697117
Extended-Neck LinerExtended-neck; two-ply liner with flame-retardant shell; soft lining; adjustable Velcro chinstrap; and three-button loop straps
697118
Extra Warm Quilted Fleece LinerGreen nylon tricot shell; quilted with foam;soft fleece lining
697119
125
Head, Eye, Face and Hearing Protection
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Accessories for Protective Caps and HatsNecessities
Chinstraps
ChinstrapsPlastic (attaches to the shell) 88128
Elastic (attaches to the suspension) 81391
Nomex® with nylon hooks (attaches to the shell) 10003127
Two-point, for Vanguard Cap only 804630
Three-point (for maximum retention), for Vanguard Cap only 804629
Helmet Lights
Stealthlite & Light Holderfor Slotted Caps
VersaLight Helmet Light
MSA offers two helmet lights that fit into our special cap adapters. Both of the lights are FM and CSA-approved forintrinsic safety, and are non-incendive.
Helmet LightsVersaLite Helmet Light with 2 AA alkaline batteries 697259
Stealthlite Helmet Light (batteries not included) 697261
Light holder for slotted Cap—no metal parts 814322
Medical Information Carrier SystemThis small, simple hardhat accessory can provide crucial, even lifesaving information,in the event of a medical crisis while the worker is on the job.
Medical Information Carrier SystemMedical Information Carrier System (pkg of 10) 10013393
MSA Hard Hat Accessories Compatibility Chart!Our Compatibility Chart can help you select the right MSA accessories to customize your cap or hat. For more information, see pp.117–118.
Head, Eye, Face and Hearing Protection
Accessories for Protective Caps and HatsPassive Helmet-Mounted Hearing Protectors
126 Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Sound Control Cap ModelsSound Control Cap Models are designed for easy attachment to slotted MSA Caps and help to reduce the effects of excessivenoise. Noise Reduction Rating (NRR) is third-party tested in accordance with ANSI S3.19-1974, CSA Class A and EN352-3.
EXC cap model XLS cap model HPE cap model
Sound Control Cap ModelsHPE cap model, complete with brackets (NRR 27 dB) 10061272
EXC cap model, complete with brackets (NRR 25 dB) 10061230
XLS cap model, complete with brackets (NRR 23 dB) 10061535
left/RIGHT Cap ModelsThe cups for left/RIGHT™ helmet-mounted models are speciallydesigned for each ear and can be adjusted individually to theangle of the ear. Each cap model comes complete with brackets.
Hearing Protection for Caps and Hats
left/RIGHT Cap Modelsleft/RIGHT, LOW, White (NRR 21) 10087439
left/RIGHT, MEDIUM, Blue (NRR 25) 10087429
left/RIGHT, HIGH, Yellow (NRR 28) 10087422
The challenge in guarding workers against noise hazards in the workplace is to balance personal attenuationdevices and comfort. A worker who removes hearing protection is a worker at risk. MSA provides a stylish and comfortable selection of cap-mounted and headband hearing protection for the most demandingenvironments, in a wide variety of noise reduction ratings. Noise Reduction Rating (NRR) is third-party testedin accordance with CSA Class A, EN352-3 and ANSI S3.19-1974. NOTE: cap model noise reduction ratingslisted below are for medium V-Gard Helmets only. NRRs and attenuation values for MSA Topgard,Thermalgard, Vanguard II, and Super V Slotted Helmets may vary. Contact MSA for additional information.
See p. 126 for passive hygienekits and hearing protectionheadband models!
Soprano™ Muff for HatsDesigned to fit all full brim hats, the Soprano Muff provides high-level hearing protection. NOTE: The addition ofthe Soprano muff reduces helmet rating to Class C.
Sound Blocker™ 26 Hearing ProtectionDesigned for high noise areas such as industrial plants and construction sites, the Sound Blocker 26 comes in twomodels, one for use with the Defender faceshield frame and a non-slotted cap model.
Sound Blocker Cap ModelsSound Blocker 26 cap model for Defender Faceshield Frame (NRR 26 dB) 10026398
Sound Blocker 26 cap model for non-slotted caps* (NRR 26 dB) 10022021
left/RIGHT Cap Models
*Tested on Comfo and Skullgard caps.
127
Head, Eye, Face and Hearing Protection
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com
Accessories for Protective Caps and HatsElectronic Helmet-Mounted Hearing ProtectorsElectronc Hearing Protection for Caps and HatsWith over 40 years of experience, MSA now offers cap-mounted hearing protectors with built-in electronics.These are comfortable hearing protectors, designed to prevent you from feeling isolated, therebyencouragaing you to use them and so protecting your hearing for the rest of your life. Noise ReductionRating (NRR) is third-party tested in accordance with ANSI S3.19-1974 and EN352-3. Also meets CSA Z94.2.
CutOff Pro Slotted Cap Model (NRR – 22dB)Built-in level dependent function protects without your feeling isolated• Lets through speech and other harmless sounds while protecting you from harmful noise• Battery life of 1000 hours• Amplification of weak sounds• Auxilliary input for connection of external devices
CutOff ProSlotted Cap Model
CutOff Pro Slotted Cap ModelBattery Life (approx. hours): 1000
Slotted cap model (stereo) 10061279
Hygiene Kit 10061293
Downlead for Basic and Pro Line
Hands Free, 2.5 mm Stereo Plug 10062072
Connect By Cable (NRR – 23dB)A comfortable hearing protector equipped with a hard-wired lead (3.5 mm) and boom microphone.• The standard Connect by Cable model comes with a hard-wired cable for connection to an MSA
ClearCommand Push-To- Talk, or lapel microphone (No noise cancelling)• Noise-cancelling boom microphone permits two-way communication with minimal interference from
background noise• Muffs come with a hard-wired 3.5 mm cable adapter
Connect-by-CableCap Model
Connect By CableConnect by Cable slotted cap model 10064516
Hygiene Kit 10061293
Effective
noise attenuation
and amplification at
the same time
CutOff Slotted Cap Modelon Advance Cap
Cap & Hat Accessories Compatibility Chart!Our Hard Hat Accessories Compatibility Chart can help you select the right MSA accessories to customize your cap or hat. For more information, see pp.117–118.
See p. 129–130 for electronic hearing protection headband models!