MS108 Computer System I Lecture 7 Tomasulo’s Algorithm Prof. Xiaoyao Liang 2014/3/24 1
Mar 29, 2015
MS108 Computer System I
Lecture 7 Tomasulo’s Algorithm
Prof. Xiaoyao Liang 2014/3/24 1
2
The Tomasulo’s Algorithm
• From IBM 360/91• Goal: High Performance using a limited number
of registers without a special compiler– 4 double-precision FP registers on 360– Uses register renaming
• Why Study a 1966 Computer? – The descendants of this include: Alpha 21264, HP
8000, MIPS 10000, Pentium III, PowerPC 604, …
3
Tomasulo Algorithm• Control & buffers are distributed with Function Units
(FU)– FU buffers called “reservation stations (RS)”– Contain information about instructions, including operands– More reservation stations than registers, so can do
optimizations compilers can’t• Registers in instructions replaced by values or pointers
to reservation stations – form of register renaming– avoids WAR, WAW hazards
• Results to FU from RS, not through registers (equivalent of forwarding). A Common Data Bus (CDB) broadcasts results to all FUs (their RSes)
• Loads and Stores treated as FUs with RSes as well
4
Tomasulo Organization
FP addersFP adders
Add1Add2Add3
FP multipliersFP multipliers
Mult1Mult2
From Mem FP Registers
Reservation Stations
Common Data Bus (CDB)
To Mem
FP OpQueue
Load Buffers
Store Buffers
Load1Load2Load3Load4Load5Load6
5
Reservation Station Components
• Busy: Indicates reservation station or FU is busy• Op: Operation to perform in the unit (e.g., + or –)• Vj, Vk: Value of Source operands• Qj, Qk: Reservation stations producing source
registers (value to be written)– Note: Qj,Qk=0 => ready
• A: effective address
Tomasulo Organization
6
• Register result status— Qi– Indicates which functional unit will write each register,
if one exists. Blank when no pending instructions that will write that register
• Common data bus– Normal data bus: data + destination (“go to” bus)– CDB: data + source (“come from” bus)
• 64 bits of data + 4 bits of Functional Unit source address• Write if matches expected Functional Unit (produces result)• Does the broadcast
Tomasulo Organization
7
Three Stages of Tomasulo Algorithm
• 1. Issue—get instruction from FP Op Queue– If reservation station free (no structural
hazard), control issues the instruction & sends operands (renames registers).
• 2. Execute—operate on operands (EX)– When both operands ready then execute;
if not ready, watch Common Data Bus for result
• 3. Write result—finish execution (WB)– Write on Common Data Bus to all awaiting
units; mark reservation station available
8
Tomasulo Loop ExampleLoop: LD F0, 0(R1) MULTD F4, F0, F2
SD F4, 0(R1) SUBI R1, R1, #8 BNEZ R1, Loop
• This time assume multiply takes 4 clock cycles in the execution stage
• Assume 1st load takes 8 clock cycles (L1 cache miss) in the execution stage, 2nd load takes 1 extra cycle (hit)
• Assume store takes 3 cycles in the execution stage• To be clear, will show clocks for SUBI, BNEZ• Show about 2 iterations
9
Loop Example using simplified presentation for load/store components
Added Store Buffers
Value of Register used for address, iteration control
Instruction Loop
Iter-ationCount
Instruction status: Exec WriteITER Instruction j k Issue CompResult Busy Addr Qk
1 LD F0 0 R1 Load1 No1 MULTD F4 F0 F2 Load2 No1 SD F4 0 R1 Load3 No2 LD F0 0 R1 Store1 No2 MULTD F4 F0 F2 Store2 No2 SD F4 0 R1 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 No SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result statusClock R1 F0 F2 F4 F6 F8 F10 F12 ... F30
0 80 Qi
10
Loop Example Cycle 1Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 80
Load2 NoLoad3 NoStore1 NoStore2 NoStore3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 No SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F301 80 Qi Load1
11
Loop Example Cycle 2Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 No
Load3 NoStore1 NoStore2 NoStore3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F302 80 Qi Load1 Mult1
12
Loop Example Cycle 3Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 No1 SD F4 0 R1 3 Load3 No
Store1 Yes 80 Mult1Store2 NoStore3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F303 80 Qj Load1 Mult1
13
Loop Example Cycle 4Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 No1 SD F4 0 R1 3 Load3 No
Store1 Yes 80 Mult1Store2 NoStore3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F304 80 Qi Load1 Mult1
• Dispatching SUBI Instruction (not in FP queue)
14
Loop Example Cycle 5Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 No1 SD F4 0 R1 3 Load3 No
Store1 Yes 80 Mult1Store2 NoStore3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F305 72 Qi Load1 Mult1
• And, BNEZ instruction (not in FP queue)
15
Loop Example Cycle 6Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 Yes 721 SD F4 0 R1 3 Load3 No2 LD F0 0 R1 6 Store1 Yes 80 Mult1
Store2 NoStore3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F306 72 Qi Load2 Mult1
• Notice that F0 never sees Load from location 80
16
Loop Example Cycle 7Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 Yes 721 SD F4 0 R1 3 Load3 No2 LD F0 0 R1 6 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 No
Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 Yes Multd R(F2) Load2 BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F307 72 Qi Load2 Mult2
• Register file completely detached from computation• First and Second iteration completely overlapped
17
Loop Example Cycle 8Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 Yes 721 SD F4 0 R1 3 Load3 No2 LD F0 0 R1 6 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 Yes Multd R(F2) Load2 BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F308 72 Qi Load2 Mult2
18
Loop Example Cycle 9Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 Load1 Yes 801 MULTD F4 F0 F2 2 Load2 Yes 721 SD F4 0 R1 3 Load3 No2 LD F0 0 R1 6 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load1 SUBI R1 R1 #8Mult2 Yes Multd R(F2) Load2 BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F309 72 Qi Load2 Mult2
• Load1 completing: who is waiting?• Note: Dispatching SUBI
19
Loop Example Cycle 10
• Load2 completing: who is waiting?• Note: Dispatching BNEZ
Instruction status: Exec WriteITER Instruction j k Issue CompResult Busy Addr Qk
1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 Load2 Yes 721 SD F4 0 R1 3 Load3 No2 LD F0 0 R1 6 10 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1
4 Mult1 Yes Multd M[80] R(F2) SUBI R1 R1 #8Mult2 Yes Multd R(F2) Load2 BNEZ R1 Loop
Register result statusClock R1 F0 F2 F4 F6 F8 F10 F12 ... F30
10 64 Qi Load2 Mult2
20
Tomasulo Organization
FP addersFP adders
Add1Add2Add3
FP multipliersFP multipliers
Mult1Mult2
From Mem FP Registers
Reservation Stations
Common Data Bus (CDB)
To Mem
FP OpQueue
Load Buffers
Store Buffers
Load1Load2Load3Load4Load5Load6
21
Loop Example Cycle 11Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1
3 Mult1 Yes Multd M[80] R(F2) SUBI R1 R1 #84 Mult2 Yes Multd M[72] R(F2) BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3011 64 Qi Load3 Mult2
• Next load in sequence
22
Loop Example Cycle 12Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1
2 Mult1 Yes Multd M[80] R(F2) SUBI R1 R1 #83 Mult2 Yes Multd M[72] R(F2) BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3012 64 Qi Load3 Mult2
• Why not issue third multiply?
23
Loop Example Cycle 13Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1
1 Mult1 Yes Multd M[80] R(F2) SUBI R1 R1 #82 Mult2 Yes Multd M[72] R(F2) BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3013 64 Qi Load3 Mult2
• Why not issue third store?
24
Loop Example Cycle 14Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 14 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 Mult12 MULTD F4 F0 F2 7 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1
0 Mult1 Yes Multd M[80] R(F2) SUBI R1 R1 #81 Mult2 Yes Multd M[72] R(F2) BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3014 64 Qi Load3 Mult2
• Mult1 completing. Who is waiting?
25
Loop Example Cycle 15Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 14 15 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 [80]*R22 MULTD F4 F0 F2 7 15 Store2 Yes 72 Mult22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 No SUBI R1 R1 #8
0 Mult2 Yes Multd M[72] R(F2) BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3015 64 Qi Load3 Mult2
• Mult2 completing. Who is waiting?
26
Loop Example Cycle 16Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 14 15 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 [80]*R22 MULTD F4 F0 F2 7 15 16 Store2 Yes 72 [72]*R22 SD F4 0 R1 8 Store3 No
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1
4 Mult1 Yes Multd R(F2) Load3 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3016 64 Qi Load3 Mult1
27
Loop Example Cycle 17Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 14 15 Load2 No1 SD F4 0 R1 3 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 [80]*R22 MULTD F4 F0 F2 7 15 16 Store2 Yes 72 [72]*R22 SD F4 0 R1 8 Store3 Yes 64 Mult1
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load3 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3017 64 Qi Load3 Mult1
28
Loop Example Cycle 18Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 14 15 Load2 No1 SD F4 0 R1 3 18 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 Yes 80 [80]*R22 MULTD F4 F0 F2 7 15 16 Store2 Yes 72 [72]*R22 SD F4 0 R1 8 Store3 Yes 64 Mult1
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load3 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3018 64 Qi Load3 Mult1
29
Loop Example Cycle 19Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 No1 MULTD F4 F0 F2 2 14 15 Load2 No1 SD F4 0 R1 3 18 19 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 No2 MULTD F4 F0 F2 7 15 16 Store2 Yes 72 [72]*R22 SD F4 0 R1 8 19 Store3 Yes 64 Mult1
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load3 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3019 56 Qi Load3 Mult1
30
Loop Example Cycle 20Instruction status: Exec Write
ITER Instruction j k Issue CompResult Busy Addr Qk1 LD F0 0 R1 1 9 10 Load1 Yes 561 MULTD F4 F0 F2 2 14 15 Load2 No1 SD F4 0 R1 3 18 19 Load3 Yes 642 LD F0 0 R1 6 10 11 Store1 No2 MULTD F4 F0 F2 7 15 16 Store2 No2 SD F4 0 R1 8 19 20 Store3 Yes 64 Mult1
Reservation Stations: S1 S2 RS Time Name Busy Op Vj Vk Qj Qk Code:
Add1 No LD F0 0 R1Add2 No MULTD F4 F0 F2Add3 No SD F4 0 R1Mult1 Yes Multd R(F2) Load3 SUBI R1 R1 #8Mult2 No BNEZ R1 Loop
Register result status
Clock R1 F0 F2 F4 F6 F8 F10 F12 ... F3020 56 Qi Load1 Mult1
• Once again: In-order issue, out-of-order execution and out-of-order completion.
31
Why can Tomasulo overlap iterations of loops?
• Register renaming– Multiple iterations use different physical
destinations for registers (dynamic loop unrolling).
• Reservation stations – Buffer old values of registers - avoiding the WAR
stall that we saw in the scoreboard.
• Other perspective: Tomasulo builds data flow dependency graph on the fly.
32
Tomasulo’s scheme offers 2 major advantages
(1)the distribution of the hazard detection logic– Distributed reservation stations and the CDB– If multiple instructions waiting on single result,
the instructions can be released simultaneously by broadcast on CDB
– If a centralized register file were used, the units would have to read their results from the registers when register buses are available.
(2) the elimination of stalls for WAW and WAR hazards