7/28/2019 Ms Unit-III Jntuworld
1/28
UNIT-III
Operations Management
7/28/2019 Ms Unit-III Jntuworld
2/28
7/28/2019 Ms Unit-III Jntuworld
3/28
INDEXUNIT 3 PPT SLIDES
S.NO. TOPIC LECTURE NO.
1. Operations Management L12. Principles and Types of Plant L23. Layout-Methods of Production L34. Work Study Basic procedure involved in Method L45. Study and Work Measurement L56. Statistical Quality Control L67. Acceptance Sampling L78. Deming's contribution to quality L8
7/28/2019 Ms Unit-III Jntuworld
4/28
Principles and types of Plant Layout
Plant Layout:- is physical arrangements,either existing or in industrial facilities.
Mainly plant layout begins with plant location.
Objectives: Economics in handling materials, semi-finished and
finished goods. Proper and efficient utilization of available floor space. Provision for better supervision and control. Careful planning To provide adequate safety To meet the quality and capacity requirements. Provision for medical and cafeteria at suitable and
convenient places.
7/28/2019 Ms Unit-III Jntuworld
5/28
Advantages of good layout:-
Economies in handling. Effective use of available area. Minimizes production delays. Improves quality control. Avoids bottlenecks. Controls production in a better way.
Better supervision. Improved utilization of labour Improves employee morale. Avoids unnecessary and costly changes.
7/28/2019 Ms Unit-III Jntuworld
6/28
Types of layouts:-
1. Product layout2. Process or functional layout3. fixed layout
7/28/2019 Ms Unit-III Jntuworld
7/28
Product layout:-
This layout is followed by only by suchindustries where the product decisions are
finalized and may not change at least inthe near future. It is because a change inthe product will call for a change in the
plant layout.
7/28/2019 Ms Unit-III Jntuworld
8/28
Advantages:-
Faster and cheaper production.
Lower cost of material handling.
Effective utilization of floor space.
Easy monitoring.
Team work benefits.
7/28/2019 Ms Unit-III Jntuworld
9/28
Disadvantages:-
Threat of duplication.
Huge capital outlay.
Little flexibility.
Discontinuity in production likely.
Monitoring each worker made difficult.
7/28/2019 Ms Unit-III Jntuworld
10/28
Process or functional layout:-
The equipment is arranged as per the
nature or types of the given set ofproducts operations major it is calledprocess layout.
7/28/2019 Ms Unit-III Jntuworld
11/28
Advantages:-
Optimum utilization of resources.
Flexibility.
Continuity.
Interesting to workers.
Monitoring.
7/28/2019 Ms Unit-III Jntuworld
12/28
Disadvantages:-
Higher material handling costs.
Larger production cycle.
Monitoring may be complex.
Higher inspection costs.
Higher wage bill.
7/28/2019 Ms Unit-III Jntuworld
13/28
Fixed layout:-
The manufacturing facilities are fixed in
their position. They cannot be shiftedfrom one place to another place. This typeof layout is used in case of large projects.
7/28/2019 Ms Unit-III Jntuworld
14/28
Advantages:-
Does not involve large investments.
High degree of flexibility.
Job enlargement.
Disadvantages:-
Material handling costs will be very high.
Resources may be under utilized.
7/28/2019 Ms Unit-III Jntuworld
15/28
Methods of production:-
Production:-is an act of transformation
i.e inputs are processed and transformed
into some output.Methods of production:-2 types
1. Intermittent or interrupted production
2. Continuous production
7/28/2019 Ms Unit-III Jntuworld
16/28
Intermittent or interruptedproduction:-
The goods are manufactured specially tofulfill the order made by the customers
rather than for stock. This is of two types
1. Job production
2. Batch production
7/28/2019 Ms Unit-III Jntuworld
17/28
Job production:-
This is the production of single complete unit byone operator or group of operators.
Ex:-Construction of a bridge, construction of dam,ship building etc
In this process goods are produced to definitecustomers orders.
Each production is a class by itself and requiresa distinct and separate job for productionpurposes.
7/28/2019 Ms Unit-III Jntuworld
18/28
Characteristics of job production:-
Whole project is taken as a single operation
Work is to be completed on each product before
processing the next item Skilled labor are required
High capital investment is required
Control of operations is simple Cost of production per unit is high.
Sometimes special machinery & special trainingis required.
7/28/2019 Ms Unit-III Jntuworld
19/28
Batch production:-
The production schedule can be chalked out
according to specific orders or on the basis ofdemand forecasts.
In batch system new batch is undertaken forproduction only when the work on all items of a
batch is complete.Ex:-Pharmaceuticals, ready made garments,
Paints, mineral water bottles.
7/28/2019 Ms Unit-III Jntuworld
20/28
Characteristics of batch production:
Products are manufactured in batches as per thespecific order produced
Division of labor is possible
Flow of material is continuous Process layout is used Automation of processes and mechanization of
materials handling can be done
Maintenance of equipment and machinery isessential
Process and product planning is done for eachbatch.
7/28/2019 Ms Unit-III Jntuworld
21/28
Continuous production:-
In this system items are produced for thestocks and specific orders.
In continuous manufacturing systems eachproduction run manufacturers in large lot sizesand the production process is carried on in adefinite sequence of operation in a pre-
determined order. This is of one type
1.Mass production
7/28/2019 Ms Unit-III Jntuworld
22/28
Mass production:-
Also called as flow production The production can be undertaken on large and
specialized machines and processes.
Characteristics:- Mechanization and division of labor Large-scale economies Sophisticated material handling systems to
minimize the cost Work study techniques ISO 9000 like sophisticated quality control
techniques.
7/28/2019 Ms Unit-III Jntuworld
23/28
Work study:-
According to British Standard (BS 3138),work study refers to the method study
and work measurement which are used toexamine human work in all its contexts bysystematically investigating into all factors
affecting its efficiency and economy tobring forth the desired improvement.
7/28/2019 Ms Unit-III Jntuworld
24/28
Benefits:-
Directly leads to standardization of the jobprocesses
Determines cost of the work performed
It saves the time Contributes to cost savings
Enhances the employee morale
Facilitates the organization to plan and achieve worktargets
Enhances the productivity of all workers andmachines
Helps to evaluate the department performance
7/28/2019 Ms Unit-III Jntuworld
25/28
Components of work study:-
Method study
Work measurement
Method study:-
Is also called as Motion study.
Method study is the systematic recordingand critical examination of the existingand proposed ways of doing work.
7/28/2019 Ms Unit-III Jntuworld
26/28
Basic procedure of method study:-
Aim: to develop better working methods Select: the task to be studied Record: all related facts Examine: the critical facts should be examined Develop: the best possible method Define: the best method so developed Install: the new method Maintain: the installed method Result: increased efficiency, cost effectiveness
and good productivity
7/28/2019 Ms Unit-III Jntuworld
27/28
Work measurement:-
Also called Time study, establishes thetime taken by a qualified worker to
complete a specified job at a definedlevel of performance.
Time measuring devices:-
1. Stop watch2. Motion picture camera3. Time recording machine4. Electronic timer
7/28/2019 Ms Unit-III Jntuworld
28/28
Statistical Quality Control:-
Quality is some prescribed or desiredcharacteristics present in raw material, semi-finished or finished goods.
Control is the process of verification orcorrection of the product when the deviations inthe quality are found to be more than expected.
Quality control is of great value to both producerand customer
SQC is applied by taking samples and drawingconclusions by means of some mathematicalanalysis.