MRO MACHINERY CATALOG 2017 Air Filtration Bandsaws Belt Grinders Bevelers Cold Saws Cut-Off Saws Drill Presses Ironworkers Heavy Duty Industry Solutions
MRO MACHINERYC A T A L O G 2 0 1 7
Air Filtration
Bandsaws
Belt Grinders
Bevelers
Cold Saws
Cut-Off Saws
Drill Presses
Ironworkers
Heavy Duty Industry Solutions
Call Purity Cylinder Gases for more information 1-888-532-2375
Prices subject to change. Good thru 12/31/2017 or while supplies last!
Locally Owned and Operated Since 1938
2
BA
ND
SA
WS
Wellsaw Scissor Type Band SawWLS 1318, $7,400
• Cut round 13”, rectangular 13” x 18”• Variable speed 70-375 SFPM• Carbide guides • Wet cutting system• Variable hydraulic feed rate control• Quick acting vice• Auto shut-off at end of cut
Wellsaw Semi-auto Band SawWLS 1318SA, $12,970
• PLC controlled full cycle semi-auto• Cut 13” round, 13”x18” rectangular• Variable hydraulic feed control• Carbide roller guides• Variable speed 70-375 SFPM• Wet cutting system• Quick acting vise• Auto shut-off at end of cut• Swivel vise to 45 deg.
Horizontal BandsawsDKE 983100 DKE 983101
SE712, $1,750 SE912, $2,750 7x12 Cut Capacity 9x12 Cut Capacity• Medium duty • Hydraulic control• Accurate cutting • Chip brush blade cleaner• Rugged Gear box • Wet or dry cutting
Horizontal Twin-Post Band SawWLS W-9-1, $10,950
• PLC controlled full cycle semi-auto• Cut 9” round, 9”x18” rectangular• Variable hydraulic feed control• Carbide roller guides• Variable speed 70-380 SFPM• Wet cutting system• Manual vise• Auto shut-off at end of cut• Swivel vise to 45 deg.
Purity Cylinder Gases can help you with all of your MRO Machinery needs! Call us today! 1-888-532-2375
Locally Owned and Operated Since 1938
3Prices subject to change. Good thru 12/31/2017 or while supplies last!
MEA
SU
REM
EN
T SYSTE
MS
For Band Saws, Cold Saws, Iron Workers, and More!
Saw Gear - Programable Stop System
Advanced Measuring Systems - AMS
Tiger Stop - Measurement/Feed SystemIf you need to increase your production, decrease set-up time, reduce operator error and eliminate scrap...Scotchman Advanced Feed System is the answer for you!
• Fast Simply move the stop to the correct setting and let go. The gauge aligns itself to the dimension you selected. It’s as easy as picking up & pressing down the Multi-Loc or sliding the Quick-Loc to the setting. • Accurate Once set, the teeth guarantee the stop will never slip/move, eliminating measuring errors and waste. • Repeatable The same dimensions can be repeated again and again by different operators on different operations, even on different days.• Cost Effective The investment will be quickly returned in lower labor costs, reduced makeovers and less waste.
• Can be mounted to feed left or right
• Program multiple lengths or minimize remnant length
• Set in feet, inches, fractions, decimals, or metric
• Optional downloading from your PC
• Can be used as a feeder or a stop
• Miter capability on saw head
• Electronic zero-point calibration
• Multi-lingual
• Adjustable drive speed of 1” to 25” per second.
• Working lengths: 4’, 6’, 8’, 10’, 12’, 16’, 20’, 24’, & 30’
Call for exact specs and pricing.
Priced right, yet very rugged and simple to use. All you do is enter the length required and press go. It can be mounted to move left to right or right to left and is available in 8’,12’ and 16’ lengths only.
• Eliminates time and mistakes from pulling a tape measure, locking a stop, or marking parts. Lengths can be entered in fractions, decimal or metric.
• Program and store cut list, up to 10 lists with up to 10 moves per job.
Call for exact specs and pricing.
Working lengths:5’, 10’, 15’, 20’, 25’
Call Purity Cylinder Gases for more information 1-888-532-2375
Prices subject to change. Good thru 12/31/2017 or while supplies last!
Locally Owned and Operated Since 1938
4
CO
LD S
AW
SCPO 350ScotchmanCold Saw$6,195
• Manual Saw• Manual clamp for material vise• Operator controlled trigger switch
CPO 350 PKPD Scotchman Cold Saw, $9,395• Semi-automatic Saw• Air-operated clamp for material vise• Pneumatic power down feed with electric controls• Emergency stop button
Dimensions & SpecificationsMultiple cutting speedsMax. diameter blade, 14”Abor Bore 1-9/16”Pin Spacing 4/12/64
Dimensions & SpecificationsMultiple cutting speedsMax. diameter blade, 14”Abor Bore 1-9/16”Pin Spacing 4/12/64
CPO 350 NF PKPD Scotchman Cold Saw for Non-Ferrous Aluminum, Plastic, Copper, etc., $9,995
DKE 74029-2
Super Technics350CE Cold Saw (230/3)$6,425
SPECIFICATIONS
Maximum Blade Size 14 inches with 32 mm arbor (2/8/45mm drive pin
Minimum Blade Size 12 inches with 32 mm arbor (2/8/45mm drive pin
Spindle Speeds Variable
Min/Max Spin. RPM 20 RPM / 100 RPM
Head Feed Manual
Vise Manual, cam activated
Max. Vise Opening 6-5/8 inches
Miter Cutting Cap. Up to 45˚ left/up to 45˚ right/ 90˚ right for slot cutting
Controls CE Certified 24-volt - Handle mounted trigger switch
Horsepower 3.5 HP
Weight 650 pounds
Work /Overall Height 40 inches / 79 inches
Base Width/Depth 27 inches / 39 inches
Lubricant Flood type unit built into the machine (Mechanical)
230-volt three phase Voltage • Available 460-volt three phase (external transformer)
AMP 20-amp service for 230-volts machines • 16-amp service for 460-volt machines
Compressed Air 90 PSI with optional pneumatic vise.
Manual cold saw that will rotate to 90º for slot cutting and offers 3 different speeds. A mechanical coolant pump with flow control is included.
Dimensions & SpecificationsCutting Speeds, 3,000 rpm • Motor Rate, 5 hpMultiple wiring options • Max. diameter blade, 14”Abor Bore 1-9/16” • Pin Spacing 4/12/64 • Weight: 675 lb. • Dimensions: 21-7/8” x 43-1/2” x 56-1/4” (not incl. feed handle), 37-7/16” (from floor to vise)
Purity Cylinder Gases can help you with all of your MRO Machinery needs! Call us today! 1-888-532-2375
Locally Owned and Operated Since 1938
5Prices subject to change. Good thru 12/31/2017 or while supplies last!
IRO
N W
OR
KER
SPortafab 45 Portable Iron WorkerSingle Operator, 4-Stations 45-ton punch station (1- 1/8” in 1/2”) 4-1/2” throat depth 2” die holder Adjustable electric stroke control w/scale 3-in-1 combination tool (angle shear, bar shear, rod shear) Stand w/tooling storage 110 volt, 1-phase Three year parts warranty Made in USA
$6,390
50514-CM 50-Ton Iron WorkerSingle Operator, 5-Stations 50-ton punch station (1-1/4” in 1/2”) 6” throat depth 2” die holder Adjustable stroke control Angle shear, 4x4x3/8” at 90° 14” Flat bar shear Rectangular notcher, 2-1/2x2-3/4x3/8” 230/460 volt, 3-phase Three year parts warranty Made in USA $9,550
5014-TM 50-Ton with 3-station revolving turret Single Operator, 7-Stations 50-ton punch station (1-1/4” in 1/2”) 4” throat depth Three 2” die holders Adjustable stroke control Angle shear, 4x4x3/8” at 90° 14” Flat bar shear Rectangular notcher, 2-1/2x2-3/4x3/8” 230/460 volt, 3-phase Three year parts warranty Made in USA $12,190
D095/140-24M95 Ton Iron Worker Dual Operator, 5-Stations 95-ton punch station (1-3/16” in 1”) 9” throat depth Adjustable swing away stripper Punch jog control Angle shear, 6x6x1/2” at 90° 24” Flat bar shear Rectangular notcher, 3x4x1/2”230/460 volt, 3-phase Three year parts warranty Made in USA $26,390
Call Purity Cylinder Gases for more information 1-888-532-2375
Prices subject to change. Good thru 12/31/2017 or while supplies last!
Locally Owned and Operated Since 1938
6
DR
ILL
PR
ESSES
BENCH TOP & FLOOR MODELS:Locking handle hub
CE Safety Electrical PackageLarge Diameter Sturdy Spindle
Massive Cast head
TB-16 5/8” 1/2 Hp Bench TopDrill Press, DKE 77100, $1,050 (Shown)
• Max work dia. 14-1/8” • Max drill cap. 5/8”• Spindle travel 3-1/8” • Spindle taper MT2• Spindle speeds: 9 via 3 pulley system• Tilting, rotating swivel table with T-slot• Safety guard and interlocks
TB-16-V 5/8” Variable Speed1/2 Hp Bench Top Drill Press,
DKE 77102, $1,450(Not shown)
SB-16 5/8” Floor Stand Drill Press,DKE 77200, $1,395
• Max work dia. 14-1/8” • Max drill cap. 5/8”• Spindle travel 3-1/8” • Spindle taper MT2• Spindle speeds: 9 via 3 pulley system• Tilting, rotating swivel table with T-slot• Safety guard and interlocks
SB-25 1”, 2 Hp Floor StandDrill Press, DKE 77300, $1,995
• Max work dia. 18” • Max drill cap. 1”• Spindle travel 5” • Spindle taper MT3• Spindle speeds: 9 via 3 pulley system, 270 - 2000 rpms• Tilting, rotating swivel table with T-slot• Safety guard and interlocks
SB-25-V 1”, 2 Hp Variable Speed Floor Stand Drill PressDKE 77600-1V, $2,450
SB-32 1-1/4”, 2 Hp Floor Stand Drill PressDKE 77400, $2,550• Max work dia. 18” • Max drill cap. 1-1/4”• Spindle travel 5-1/4” • Spindle taper MT4• Spindle speeds: 9 via 3 pulley system, 270 - 2290 rpms• Tilting, rotating swivel table with T-slot• Safety guard and interlocks
Purity Cylinder Gases can help you with all of your MRO Machinery needs! Call us today! 1-888-532-2375
Locally Owned and Operated Since 1938
7Prices subject to change. Good thru 12/31/2017 or while supplies last!
BELT G
RIN
DER
S, G
RIN
DER
S &
BEN
DER
S
Model KZI S612-1Belt/Disc Sander
$2,295
• 6” Belt, 12” Disc • 3HP• 2,800 FPM
Model SCI AL100U-02Scotchman Tube & Pipe Grinder/Notcher
$6,995
• 1/3 HP, 1800SFPM • Two axis crossfeed table• 90 - 30 degree in • 4HP pipe 3/4” - 3” • 230/460-3 Phase
MODEL KZI 1SM1”X42” Belt Sander
1/3 HP, 1800 SFPM • Tilt Table
$289
MODEL 760 / BRK 701001-1/2”X60” Belt Sander
Single speed 8000 SFPM1.5 HP, 1 Phase, 120 Volt
$2,346
MODEL 760 / BRK 721101-1/2”X60” Belt SanderVariable speed 800-8000 SFPM
1.5 HP, 1 Phase, 120 Volt
$3,168
MODEL KZI 2FSM2”X48” Belt Sander
1/2 HP, 4500 SFPM • Tilt TableRemovable Platen
$449
MODEL x400 / BRK 248202”X48” Belt Sander
1 HP, 8000 SFPM Pivoting Belt Head
$1,563
Prices subject to change. Good thru 12/31/2017 or while supplies last! Not all items stocked at every location.
Family Owned & Locally OperatedSince 1938
Grand Rapids(616) 532-23751-888-532-2375 www.puritygas.com
Angola, IN(260) 665-7241Battle Creek, MI(269) 660-1907Cadillac, MI(231) 779-2468Elkhart, IN(574) 389-8760
Fort Wayne, IN(260) 497-7565Holland, MI (616) 848-7650Kalamazoo, MI(269) 344-0518Lansing, MI(517) 321-9555
Mt. Pleasant, MI(989) 775-0898Muskegon, MI(231) 773-2510Saginaw, MI(989) 755-4344Traverse City, MI(231) 922-0851
Warsaw, IN(574) 267-6066
MicroAir TM1000 Air SystemTaskmaster Base Unit with 8x7 Arm Starting at $5,995
TYPICAL APPLICATIONS• Welding Smoke• Grinding Dust• Dry Particulate
FEATURES:• Dual Self-Cleaning Cartridges• High Capacity Cleaning• Compact Design• Wide Range of Filter Options• Low Power Requirements 120V Single Phase
• Broad Choice of Attachments to adapt to any application or process• Improved Source Capture Arm—designed for ease of movement, less restriction, and powerful collection at the source.
OPTIONS:• 2 hp 208/230 volt, 3 phase • 2 hp 460 volt, 3 phase motor
• Light Kit with hood mounted switch• Auto-Pulse Cartridge Cleaning• 99.97% Hepa Afterfilter• Refillable Module-Charcoal or Purasorb• Big Wheel Kit (Required with 8” x 9’ Arm Option)
Downdraft TablesALSO AVAILABLE FROM PURITY AND MICROAIR:
Filters Ambient Units