Mq 7 System Admin 000-374

IBM 000-374

000-374 IBM WebSphere MQ V7.0 System

Administration

Practice TestVersion 1.1

Actu

alTe

sts.

com

QUESTION NO: 1

An administrator is setting up sender receiver channels between QMGR1 and QMGR2. As part of

the verification test, the administrator puts a message on the remote queue RQ of QMGR1 and

notices that the message has correctly reached the local queue LQ of QMGR2. An application

then starts putting messages on RQ. A few minutes later, the administrator notices that all the

messages being put on RQ end up on QMGR2's dead letter queue. What is a probable cause of

the problem?

A. The application set Message Expiry on the messages

B. The Max Uncommitted Messages limit on QMGR2 was reached

C. The application set the Report options in the MQ Header of the messages

D. The UserIdentifier set in MQ Header of the messages did not have put authorization on LQ

Answer: D

QUESTION NO: 2

An administrator wants to prevent the channel initiator process from starting when a queue

manager QMA on AIX is started. Which action(s) will accomplish this?

A. Restart the queue manager usingstrmqm ns QMA.

B. Restart the queue manager usingstrmqm chinit no QMA.

C. Issue the command ALTER QMGRSCHINIT(DISABLED), then restart the queue manager

using strmqm QMA.

D. Edit the file qm.ini for QMA and add an entryChannelInitiator = No in the CHANNELS stanza,

then restart the queue manager usingstrmqm QMA

Answer: A

QUESTION NO: 3

An IBM WebSphere MQ V6.0 broker environment which is shared with an IBM WebSphere

Message Broker V6.0 environment is being migrated to an IBM WebSphere MQ V7.0 broker

environment. What action will continue to ensure proper coexistence in the overall shared

environment?

A. Set the PSMODE parameter on the IBMWebSphere MQ broker queue managers to COMPAT

B. Set the coexistence parameter to true in each of the broker's queue manager qm.ini file

C. Enable the coexist flag on each broker's queue manager in the broker domain

D. The IBM WebSphere MQ broker queue managers will automatically reconfigure themselves for

coexistence on startup

IBM 000-374: Practice Exam

"Pass Any Exam. Any Time." - www.actualtests.com 2

Actu

alTe

sts.

com

Answer: A

QUESTION NO: 4

A financial company has decided that as part of the migration of their existing IBM WebSphere MQ

V6.0 broker infrastructure to IBM WebSphere MQ V7.0 they would like to make use of the

publish/subscribe clusters topology in IBM WebSphere MQ V7.0. Which MQSC command needs

to be issued on all queue managers in the broker infrastructure during the migration to remove the

old IBM WebSphere MQ V6.0 broker relationships?

A. ALTER QMGR PARENT (' ')

B. ALTER QMGR PARENT (EMPTY)

C. ALTER QMGR PARENT (' ') CHILD (' ')

D. ALTER QMGR PARENT (EMPTY) CHILD (NONE)

Answer: A

QUESTION NO: 5

An application receives messages from a queue APPQ using MQGET. Which MQSC command

will successfully configure the queue manager so that the application can receive messages

published to topic Stock/IBM/Price?

A. DEFINESUB(TO_APP) TOPICSTR(Stock/IBM/Price) + DEST(APPQ)

B. DEFINESUB(TO_APP) TOPICSTR(Stock/IBM/Price) + DESTQ(APPQ)

C. DEFINESUB(TO_APP) TOPICSTR(Stock/IBM/Price) + TARGET(APPQ)

D. DEFINESUB(TO_APP) TOPIC(Stock/IBM/Price) + DEST(APPQ)

Answer: A

QUESTION NO: 6

An administrator wants to prevent applications from publishing messages to the topic tree below

Counters/Application. What MQSC command will accomplish this task?

A. DEFINETOPIC(Counters/Application) PUB(NO)

B. DEFINETOPIC(Counters/Application) PUB(DISABLED)

C. DEFINETOPIC(CTOPIC) TOPICSTR(Counters/Application) + PUB(NO)

D. DEFINETOPIC(CTOPIC) TOPICSTR(Counters/Application) + PUB(DISABLED)

Answer: D



Actu

alTe

sts.

com

QUESTION NO: 7

A financial company is looking to take advantage of the publish/subscribe feature that IBM

WebSphere MQ V7.0 offers. They would like to be able to share stock quotes between their

feedhandlerapplications as quickly as possible. They also need to make sure that the

publish/subscribe infrastructure is highly scalable as they will be adding additional feedhandler

applications. What is the best publish/subscribe topology to meet the company's needs?

A. Publish/subscribe clusters

B. Publish/subscribe hierarchies

C. Publish/subscribe broker bundles

D. Publish/subscribe interconnections

Answer: A

QUESTION NO: 8

A routing application has been modified to generate smaller messages no larger than 10KB in

size. The operations team has decided to reduce their queue resources need for the routing

application's primary queue ROUTING_Q as well to better make use of their file system resources.

What command will allow them to do this?

A. ALTERQL(ROUTING_Q) MAXLENGTH(20000)

B. REPLACEQL(ROUTING_Q) MAXMSGL(20000)

C. ALTER QLOCAL (ROUTING_Q)MSGLENGTH(20000)

D. DEFINE QLOCAL (ROUTING_Q)MAXMSGL(20000) REPLACE

Answer: D

QUESTION NO: 9

What should a company do to set up its MQ environment for media recovery?

A. No additional configuration is needed

B. Configure queue managers for linear logging

C. Configure queue managers for advanced logging

D. Modify logging so that log files are viewed as a closed loop

Answer: B



Actu

alTe

sts.

com

QUESTION NO: 10

Queue manager QMA had previously been configured to disable the publish/subscribe broker.

Now, the administrator has been asked to turn on the native publish/subscribe engine. The

administrator can accomplish this task by executing the following command:

A. strmqbrk m QMA

B. ALTER QMGRPSMODE(ENABLED)

C. STARTSERVICE(SYSTEM.BROKER)

D. ALTER BROKERPSMODE(ENABLED)

Answer: B

QUESTION NO: 11

The warehouse application is reporting issues with trying to read messages from its input

message queue, PRIME_REPOS_Q. There are three applications that access this queue via

QALIAS definitions, as follows: DEFINE QLOCAL (PRIME_REPOS_Q) DEFINE QALIAS

(WAREHOUSE1_AQ) TARGET (PRIME_REPOS_Q) DEFINE QALIAS

(WAREHOUSE2_AQ)TARGET (PRIME_REPOS_Q)DEFINE QALIAS (WAREHOUSE3_AQ)

TARGET (PRIME_REPOS_Q) The warehouse application has notified the operations team they

need to stop the incoming messaging traffic while they work to resolve their message read issue.

What action does the operation team need to take to fulfill the warehouse application teams

request? Issue the command(s):

A. ALTERQLOCAL(PRIME_REPOS_Q) PUT (DISABLED) GET (ENABLED)

B. ALTERQLOCAL(PRIME_REPOS_Q) PUTMSG (DISABLED) GETMSG (ENABLED) UPDATE

ALIASES FOR QUEUE(PRIME_REPOS_Q)

C. ALTER QALIAS (WAREHOUSE1_AQ) TARGET (PRIME_REPOS_Q)PUT(DISABLED) GET

(ENABLED) PUSHUPDATE

ALTER QALIAS (WAREHOUSE2_AQ) TARGET (PRIME_REPOS_Q) PUT (DISABLED) GET


ALTER QALIAS (WAREHOUSE3_AQ) TARGET (PRIME_REPOS_Q) PUT (DISABLED) GET


D. ALTERQLOCAL(PRIME_REPOS_Q) PUTMSG (DISABLED) GETMSG (ENABLED)

REFRESH QALIAS (WAREHOUSE1_AQ)



Answer: A



Actu

alTe

sts.

com

QUESTION NO: 12

The operations team has created a new queue manager infrastructure using default settings to

support the deployment of a company's new database warehousing application. This application

sends messages to applications running on other queue managers, which process the messages

and send replies. After deployment of the application the message throughput is much lower than

expected. The operations team doesn't notice any resources issues with disk space, memory

usage, or CPU usage, however, they do notice that there are many more messages on the reply

to-queues than expected. They also notice that error messages are frequently generated as the

application processes reply messages. What is the most probable cause of the performance

slowdown?

A. The warehousing application has unintentionally requested activity reports for each message it

creates

B. The warehousing application was unintentionally deployed with trace route reporting enabled

C. The warehousing applications queue manager reply-to-queue handler was not disabled

D. The warehousing applications queue manger reply-to-queue filtering was not properly adjusted

Answer: A

QUESTION NO: 13

Queue manager DEV_QM1 is no longer able to send and receive messages from queue manager

DEV_QM2. Both queue managers reside on the Windows server. The administrator takes a look

at the MQ Explorer to see what the problem is and notices the channel initiator for DEV_QM2 has

stopped. What options does the administrator have to resolve the problem?

A. PCF commands

B. MQSC commands

C. Control commands

D. WebSphere MQ Explorer

E. WebSphere MQ API Exerciser

Answer: A,B,C

QUESTION NO: 14

An administrator needs to record media images. Which one of the following commands should the

administrator use to record them?

A. rcrmqobj

B. saveqmgr



Actu

alTe

sts.

com

C. rcdmqimg

D. savemqobj

Answer: C

QUESTION NO: 15

The administrator wants to define a service object on a queue manager on Windows so that an

application will start when the queue manager is started and stop when the queue manager is

stopped. What attribute should the administrator include on the DEFINE SERVICE command

inrunmqsc to ensure that this happens?

A. SERVCTL(AUTO)

B. SERVCTL(QMGR)

C. CONTROL(AUTO)

D. CONTROL(QMGR)

Answer: D

QUESTION NO: 16

An administrator is using WebSphere MQ Explorer to administer a remote queue manager. On the

Add a Remote Queue Manager wizard, which of the following fields can the administrator specify

values for?

A. MCAUSER

B. Security exit

C. User identification

D. SSL key repositories

E. Access control list (ACL)

Answer: B,C,D

QUESTION NO: 17

An IBM WebSphere MQ architect is planning an infrastructure for a banking application which

cannot lose any messages. What setup should the architect recommend to achieve this?

A. no particular setup is needed

B. persistent messages linear logging

C. persistent messages circular logging



Actu

alTe

sts.

com

D. nonpersistent messages linear logging

Answer: B

QUESTION NO: 18

An application is putting persistent messages on queue Q1 inside an active transaction when an

abnormal shutdown of queue manager QM occurred. QM is configured with linear logging. What

action does the administrator need take to recover Q1 and roll back the uncommitted messages?

A. no action is needed

B. strmqm -m QM1 -recover

C. getmqobj -m QM -t ql QL

D. rcrmqobj -m QM -t ql Q1

Answer: A

QUESTION NO: 19

An administrator has defined two listeners for queue manager QMA with the following two

runmqsc commands: DEFINE LISTENER(ABC) TRPTYPE(TCP) PORT(2414) +

CONTROL(QMGR)REPLACE DEFINE LISTENER(DEF) TRPTYPE(TCP) PORT(2415) +

CONTROL(QMGR)REPLACE The queue manager was then restarted so that both listeners are

running. Which command will stop the listener ABC and leave listener DEF running?

A. issue shell commandendmqlsr m QMA

B. issue shell commandendmqlsr m QMA l ABC

C. issue shell commandctrlmq m QMA l ABC stop

D. issue MQSC command STOPLISTENER(ABC)

Answer: D

QUESTION NO: 20

The operations team has been testing a new message routing application in their IBM WebSphere

MQ V7.0 pre-production environment. When the application is started, many of the other

applications designed to interface with the message routing application begin to experience long

wait times while retrieving messages. The operations team notices that many of the queues that

the message routing application puts to, are filling up. The team also notices that the number of

active queue manager log files has increased. What is the most probable cause for the

performance slowdown for getting applications?



Actu

alTe

sts.

com

A. The data store for the message routing application is full

B. The MQGET calls are not issued with the FASTPATH retrieval parameter for improved

performance

C. The message routing application issues several MQPUT calls withinsyncpoint without

committing them

D. The getting applications need to invoke the new fast retrieval algorithm in IBMWebSphere MQ

V7.0 for message retrieval

Answer: C

QUESTION NO: 21

An administrator is trying to use WebSphere MQ Explorer to administer a remote queue manager.

After successfully connecting to the queue manager, what is the administrator able to do?

A. Stop the queue manager.

B. Delete the queue manager.

C. Create queues on the queue manager.

D. Start the command server for the queue manager.

Answer: C

QUESTION NO: 22

During the load test of a routing application many queue depth high events are generated for the

ROUTING_Q which holds the applications input messages. Which of the following is the simplest

change that would reduce the number of queue high depth events? Increase the:

A. MAXMSG attribute on the ROUTING_Q queue

B. MAXDEPTH attribute on the ROUTING_Q queue

C. MAXMSGattribute on the SYSTEM.DEFAULT.LOCAL.QUEUE and recreate the ROUTING_Q

queue

D. MAXDEPTH attribute on the SYSTEM.DEFAULT.LOCAL.QUEUE and recreate the

ROUTING_Q queue

Answer: B

QUESTION NO: 23

A legacy application uses MQPUT to send messages to a queue INV. Which set of MQSC

commands below will successfully configure the queue manager so that a number of JMS

applications can receive these messages by subscribing to topic Inventory/CurrentItems?



Actu

alTe

sts.

com

A. DEFINETOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)

DEFINE QALIAS(INV) TARGET(INV_TOPIC) TARGTYPE(TOPIC)

B. DEFINETOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)

DEFINE TALIAS(INV) TARGET(INV_TOPIC) TARGTYPE(TOPIC)

C. DEFINE TOPIC (INV_TOPIC) +TOPICSTR(Inventory/CurrentItems) QALIAS(INV)

D. DEFINEQALIAS(INV) TARGET(Inventory/CurrentItems) + TARGTYPE(TOPIC)

Answer: A

QUESTION NO: 24

An administrator has created a queue manager on AIX system A, using the command crtmqm ll

QMA. What command will create a backup queue manager for QMA on AIX system B?

A. crtmqm ll QMB

B. crtmqm ll QMA

C. crtmqm lb QMA

D. crtmqm ll backup QMA

Answer: B

QUESTION NO: 25

An administrator deployed a new application on queue manager QMGR1 in their AIX server. The

administrator notices that the application is crashing frequently and contacts the IBM support team

for help. The IBM support team asks the administrator to send any First Failure Support

Technology (FFST) files that have been generated. Which of the following files should the

administrator send to the IBM support team?

A. AMQ*.LOG files from /var/mqm/trace directory

B. AMQ*.FDC files from /var/mqm/errors directory

C. AMQ*.FFST files from /var/qmgrs/QMGR1/errors directory

D. AMQ*.ERROR files from /var/mqm/qmgrs/QMGR1/errors directory

Answer: B

QUESTION NO: 26

The administrator is required to give authority for user MQUSER to execute runmqsc control

commands on Windows queue manager QM1. Which method can be followed to grant authority?



Actu

alTe

sts.

com

A. modify the file permission for runmqsc.exe

B. add MQUSER to the Windows Administrators group

C. access torunmqsc can't be granted to non-mqm users

D. setmqaut m QM1 t qmgr p MQUSER +inq +dsp +connect +alladm

Answer: B

QUESTION NO: 27

An administrator is setting up a transmit queue so that the channel associated with it is

automatically started. However, the channel does not start when messages are placed on the

queue. The current attributes of the queue:

DISPLAY QL (QM2) USAGE TRIGGER TRIGTYPE TRIGDATA TRIGDPTH TRIGMPRI IPPROCS

OPPROCS INITQ 1 : DISPLAY QL(QM2) USAGE TRIGGER TRIGTYPE TRIGDATA TRIGDPTH

TRIGMPRI IPPROCS OPPROCS INITQ AMQ8409: Display Queue details. QUEUE (QM2)

TYPE(QLOCAL) INITQ(SYSTEM.DEFAULT.INITIATION.QUEUE) IPPROCS(0) TRIGGER

OPPROCS(0) TRIGDATA(QM1.2.QM2) TRIGDPTH(1) TRIGMPRI(0) TRIGTYPE(FIRST)

USAGE(XMITQ) Which corrective action is required to start the channel automatically?

A. start Trigger Monitor

B. modify attribute TRIGMPRI to specify a higher priority

C. modify attribute INITQ to specify SYSTEM.CHANNEL.INITQ

D. disconnect all applications connected to the transmit queue

Answer: C

QUESTION NO: 28

The administrator has to give authority for user test to browse messages in queue LQ on queue

manager QM1. User test will be using MQ Explorer to browse the messages. Which commands

have to be executed to achieve this?

A. setmqaut -m QM1 -t qmgr -p test +connect +inq +dsp

setmqaut -m QM1 -t q -n SYSTEM.ADMIN.COMMAND.QUEUE -p test +put

setmqaut -m QM1 -t q -n SYSTEM.MQEXPLORER.REPLY.MODEL -p test +inq +get +dsp

setmqaut -m QM1 -t q -n LQ -p test +dsp + browse

B. setmqaut -m QM1 -t qmgr -p test +connect +inq +dsp

setmqaut -m QM1 -t q -n LQ -p test +dsp +browse

setmqaut -m QM1 -t q -n MQAI.** -p test +all

setmqaut -m QM1 -t q -n LQ -p test +dsp +browse

C. setmqaut -m QM1 -t q -n LQ -p test +dsp +browse



Actu

alTe

sts.

com

D. MQ Explorer can't be used by non-mqm users

Answer: A

QUESTION NO: 29

An administrator wants to define a IBM WebSphere MQ object so that the applications can be

prevented from sending messages to the processing applications queue APPQ, but continue to

allow administrators to send test messages to the processing application. The application will send

messages using an object ABC. What MQSC command should be used?

A. DEFINEQALIAS(ABC) BASEQ(APPQ)

B. DEFINEQALIAS(ABC) TARGET(APPQ)

C. DEFINEQREMOTE(ABC) TARGET(APPQ)

D. DEFINEQLOCAL(ABC) ALIASQ(APPQ)

E. DEFINEQMODEL(ABC) BASEQ(APPQ)

Answer: B

QUESTION NO: 30

A company decides to use the IBM WebSphere MQ transport for SOAP to enable some of its Java

applications as WebServices on AIX. The administrator is asked to define and start a listener as a

service. Which one of the following methods should be used?

A. runmqlsr

B. amqwSOAPNETlistener

C. defineWMQJListener.sh

D. com.ibm.mq.soap.transport.jms.WMQSender

Answer: C

QUESTION NO: 31

A bank application sends critical financial messages on a queue so that other applications can

process them. In order to recover messages after a system failure, the messages need to be:

A. set as persistent.

B. defined with high priority.

C. saved manually in a log file.

D. backed up to another queue.



Actu

alTe

sts.

com

Answer: A

QUESTION NO: 32

The following command is executed using the JMSAdmin facility. InitCtx> define Q(Q_IN)

QMGR(QMGR1) QUEUE(Q1) Which one of the following did the command create?

A. Q_IN

B. Q_IN and Q1

C. Q_IN and QMGR1

D. Q_IN, QMGR1 and Q1

Answer: A

QUESTION NO: 33

When an application puts a message on a remote queue, which sequence will the queue manager

follow to identify the transmit queue?

A. 1.Use the default transmission queue

2. Use the transmission queue with the same name as the remote queue manager

3. Use the transmission queue named explicitly in a local definition of a remote queue

B. 1.Use the transmission queue with the same name as the remote queue manager

2. Use the transmission queue named explicitly in a local definition of a remote queue

3. Use the default transmission queue

C. 1.Use the transmission queue named explicitly in a local definition of a remote queue



D. 1.Use the transmission queue named explicitly in a local definition of a remote queue



Answer: C

QUESTION NO: 34

An administrator is planning a fix pack upgrade on a WebSphere MQ server containing a cluster

queue manager. As part of the fix pack upgrade, the administrator needs to minimize the impact to

the cluster environment and still allow the queue manager on the upgraded server to continue to

be part of the cluster. What command will help the administrator accomplish this task?



Actu

alTe

sts.

com

A. HALT QMGR

B. HOLD QMGR

C. REMOVE QMGR

D. SUSPEND QMGR

Answer: D

QUESTION NO: 35

A server hosting clustered queue manager APP_QM1 experienced an outage. The server was

restarted but the queue manager could not be restarted. The cluster that APP_QM1 is part of

hosts business critical applications and thus the workload algorithm needs to continue to route

messages as efficiently as possible. What would be the next step to maintain this efficiency?

A. Delete APP_QM1

B. Run RESET CLUSTER

C. Run REFRESH CLUSTER

D. Remove APP_QM1 from the repository database

Answer: B

QUESTION NO: 36

An administrator was asked to turn on IBM WebSphere MQ tracing on AIX. The administrator was

later asked to report the IBM WebSphere MQ tracing options currently applied on the system.

Which one of the following commands does the administrator need to use to get the required

information?

A. dspmqtrc

QUESTION NO: 37

A system administrator has defined the following MQ objects on three queue managers. An

application connects to queue manager QM1 to put a message on ALIAS.Q99. Where does the

message get delivered? QM1 DEFINE QALIAS(ALIAS.Q99) TARGET(Q99) DEFINE

QREMOTE(Q99) RNAME(Q99) RQMNAME(QM3) ALTER QMGR DEFXMITQ(QM2) DEFINE

QL(QM2) USAGE(XMITQ) DEFINE CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) TRPTYPE(TCP)

REPLACE + DESCR('Sender channel to QM2') XMITQ(QM2)+ CONNAME('9.20.9.32(1412)')

QM2 DEFINE CHANNEL(QM1.TO.QM2) CHLTYPE(RCVR) TRPTYPE(TCP)REPLACE ALTER

QMGR DEFXMITQ(QM3) DEFINEQL(QM3) USAGE(XMITQ) DEFINE CHANNEL(QM2.TO.QM3)

CHLTYPE(SDR) TRPTYPE(TCP) REPLACE + DESCR('Sender channel to QM3') XMITQ(QM3)+



Actu

alTe

sts.

com

CONNAME('9.20.9.33(1415)') QM3 DEFINE CHANNEL(QM2.TO.QM3) CHLTYPE(RCVR)

TRPTYPE(TCP)+ REPLACE DESCR('Receiver channel from QM2') DEFINE QL(Q99)

A. Q99 on QM3

B. MQI call will fail

C. dead-letter queue on QM1

D. dead-letter queue on QM2

Answer: A

QUESTION NO: 38

Which channel definition will require that client applications using channel ABC establish a

mutually authenticated SSL channel?

A. DEFINECHANNEL(ABC) CHLTYPE(SVRCONN) + SSLCIPH(NULL_MD5)

SSLCAUTH(REQUIRED)

B. DEFINECHANNEL(ABC) CHLTYPE(SVRCONN) + SSLCIPH() SSLCAUTH(REQUIRED)

C. DEFINECHANNEL(ABC) CHLTYPE(SVRCONN) + SSLCIPH(NULL_MD5)

SSLCAUTH(MUTUAL)

D. DEFINECHANNEL(ABC) CHLTYPE(SVRCONN) + SSLCIPH() SSLCAUTH(MUTUAL)

Answer: A

QUESTION NO: 39

The sender and receiver channels have been set up between two queue managers. An

administrator wants to start the sender channel automatically whenever messages arrive on the

corresponding transmission queue. What does the administrator need to start as a trigger monitor

for the sender channel?

A. listener

B. service

C. channel initiator

D. process definition

Answer: C

QUESTION NO: 40

Which of the following message data compression options are valid for sender channels in IBM

WebSphere MQ?



Actu

alTe

sts.

com

A. ANY

B. RLE

C. ARLL

D. SYSTEM

E. ZLIBHIGH

Answer: B,E

QUESTION NO: 41

An airline reservation system consists of three MQ queue managers. The following MQSC

commands have been executed. An application for airline reservation connects to queue manager

CANADA and puts a message to queue TORONTO. On which queue does the message end up?

QM: CANADA

DEFINE QL(INDIA) USAGE(XMITQ) DEFINE QL(RESERVATIONS) DEFINE QL(DLQ) DEFINE

CHANNEL(CANADA.INDIA) CHLTYPE(SDR)+ XMITQ(INDIA) CONNAME('9.84.100.7(1415)')

DEFINE QR(BOMBAY) RQMNAME(INDIA) RNAME(RESERVATIONS)+ XMITQ(INDIA) DEFINE

QALIAS(TORONTO) TARGET(BOMBAY) QM: INDIA DEFINE QL(CHINA) USAGE(XMITQ)

DEFINE QL(RESERVATIONS) DEFINE QL(DLQ) DEFINE CHANNEL(CANADA.INDIA)

CHLTYPE(RCVR) DEFINE QR(SHANGHAI) RQMNAME(CHINA)+ RNAME(RESERVATIONS)

XMITQ(CHINA) DEFINE CHANNEL(INDIA.CHINA) CHLTYPE(SDR)+ XMITQ(CHINA)

CONNAME('9.84.111.9(1416)') QM: CHINA DEFINE QL(RESERVATIONS) DEFINE QL(DLQ)

DEFINE CHANNEL(INDIA.CHINA) CHLTYPE(RCVR)

A. DLQ on queue managerINDIA

B. DLQ on queue managerCANADA

C. TORONTO on queue manager CANADA

D. RESERVATIONS on queue manager INDIAD.RESERVATIONS on queue managerINDIA

Answer: D

QUESTION NO: 42

An administrator has been asked to create a listener that listens on port 1416 and starts

automatically when the queue manager is started. Which of the following MQSC commands will

create the listener?

A. DEFINELISTENER(LISTENER.TCP) TRPTYPE(TCP) PORT(1416)+ QMGR REPLACE

B. DEFINELISTENER(LISTENER.TCP) TRPTYPE(TCP) PORT(1416)+ CONTROL(QMGR)

REPLACE

C. DEFINELISTENER(LISTENER.TCP(1416)) TRPTYPE(TCP) + CONTROL(QMGR) REPLACE



Actu

alTe

sts.

com

D. DEFINELISTENER(LISTENER.TCP) TRPTYPE(TCP(1416)) + START(QMGR) REPLACE

Answer: B

QUESTION NO: 43

What MQI verb is not permitted from a WebSphere MQ application program running in a base

WebSphere MQ Client environment?

A. MQDISC

B. MQCMIT

C. MQBACK

D. MQBEGIN

Answer: D

QUESTION NO: 44

A company is running applications on several Windows servers installed with WebSphere MQ

Server components. All the applications are sending data to a queue manager running on a

Solaris machine. How could the administrator redesign the infrastructure to reduce the overall

licensing costs of the infrastructure?

A. Create a cluster and include all Windows machines

B. Redesigning the infrastructure will not reduce the number of licenses required

C. ReplaceWebSphere MQ Server components with WebSphere MQ Client components on all

Windows machines

D. Rewrite the application to handle a larger workload; reduce the number of applications

andWebSphere MQ server components

Answer: C

QUESTION NO: 45

An application sends messages into a queue which has multiple instances within a cluster. There

are no requirements for message affinity and the default value is kept for the attribute DEFBIND

on the queue definition. In order to benefit from the workload management of clustering, what

option needs to be specified on the MQOPEN call from the application?

A. MQOO_INPUT_SHARED

B. MQOO_INPUT_AS_Q_DEF



Actu

alTe

sts.

com

C. MQOO_BIND_ON_OPEN

D. MQOO_BIND_NOT_FIXED

Answer: D

QUESTION NO: 46

An application using several queue managers is being tested for its end-to-end message

throughput rates. The delivery times for the messages are longer than what the developers

expect, and some messages are randomly lost. What can be done to help resolve this problem?

A. Evaluate the event messages that arrive on the dead letter queue

B. Record and evaluate activity information recorded by a trace-route message

C. Monitor the DEFAULT.SYSTEM.MSG.ROUTE queue for message routing events

D. Use a third party software package since IBMWebSphere MQ does not provide the ability to

track messages

Answer: B

QUESTION NO: 47

An application developer needs help understanding why a publishing application is failing when

trying to publish on topic RE/Current/Bids. What MQSC command can an administrator use to

help diagnose the problem?

A. DISPLAYTOPIC(RE/Current/Bids)

B. DISPLAYTSTATUS(RE/Current/Bids)

C. DISPLAYTOPICSTS(RE/Current/Bids)

D. DISPLAYTPSTATUS(RE/Current/Bids)

Answer: D

QUESTION NO: 48

A stepwise approach to moving the MQ publish/subscribe environment to V7.0 has been taken to

minimize the impact to the publish/subscribe applications using the environment. As part of this

stepwise approach there will be a mix of V6 and V7 brokers running at any one time. What

additional step must be taken to allow for the coexistence of both versions of the brokers?

A. Leave the broker's queue manager defaults in place

B. Enable the coexist flag on each broker's queue manager in the broker domain



Actu

alTe

sts.

com

C. Set the PSMODE parameter on the broker's queue manager to COMPAT

D. Set the coexistence parameter to true in each of the broker's queue manager qm.ini file

Answer: A

QUESTION NO: 49

An administrator has been asked to create new subscriptions on queue manager QMGR1 in

UNIX. The administrator issues the following MQSC commands: DEF TOPIC(TOPICA)

TOPICSTR(X/Y) DEF TOPIC(TOPICB) TOPICSTR(X/Y/Z) The administrator then runs the

following commands: setmqaut m QMGR1 -t topic -n TOPICA -p User1 +sub setmqaut m QMGR1

-t topic -n TOPICB -p User2 +sub Which of the following statements are true?

A. User2 can subscribe to topic X/Y/#

B. User2 can subscribe to topic X/Y/Z/#

C. User2 can subscribe to topic X/Y/Z but User1 cannot subscribe

D. User1 and User2 can subscribe to topic X/Y/Z

E. Neither User1 nor User2 can subscribe to topic X/Y/Z/+

Answer: B,D

QUESTION NO: 50

MYTOPIC has been defined with the command: DEFINE T(MYTOPIC)

TOPICSTR(Sports/Football) Which of the following commands are valid to modify

MYTOPIC?

A. ALTERT(MYTOPIC) PUBSCOPE(QMGR)

B. ALTERT(MYTOPIC) DEFPSIST(PERS)

C. ALTERT(MYTOPIC) DURSUB(ASPARENT)

D. ALTERT(MYTOPIC) WILDCARD(DISABLED)

E. ALTERT(MYTOPIC) TOPIC(Sports/Baseball)

Answer: A,C

QUESTION NO: 51

As part of the planned migration from IBM WebSphere MQ V6.0 brokers to IBM WebSphere MQ

V7.0, the publishing and subscribing applications have moved to IBM WebSphere MQ V7.0 and all

that is left are the brokers. After IBM WebSphere MQ V7.0 is installed, what actions do the IBM

WebSphere MQ administrators need to take to complete the migration?



Actu

alTe

sts.

com

A. Activate the PSMODE parameter on the broker

B. Issue thestrmqbrk command

C. Issue themigratemqbroker command for each broker

D. Recreate the brokers in the IBMWebSphere MQ V7.0 environment

Answer: B

QUESTION NO: 52

A company running IBM WebSphere MQ V5.3 on UNIX upgraded to IBM WebSphere MQ V7.0.

Immediately after the migration, what is the administrator expected to do? Start the:

A. MQSeries service

B. queue manager and listener simultaneously

C. queue manager before starting the listener

D. listener before starting the queue manager

Answer: C

QUESTION NO: 53

Which two user profiles are mandatory to correctly run IBM WebSphere MQ on i5/OS?

A. QMQM, QMQMADM

B. QMQMADIM,mqm

C. mqm, QMQM

D. mqm, MUSR_MQADMIN

Answer: A

QUESTION NO: 54

What are the four predefined message types?

A. Request, response, publication, datagram

B. Publication, subscription, request, response

C. Request, reply, report, datagram

D. Request, broadcast, acknowledgment, response

Answer: C



Actu

alTe

sts.

com

QUESTION NO: 55

An administrator created a queue manager Paint.queue.manager on AIX with circular logging. The

administrator then was told that the system will be used for production, so the logging needs to be

switched to linear. How can the administrator make this change?

A. Edit "/var/mqm/mqs.ini" and changeLogType=LINEAR

B. Edit "/var/mqm/qmgrs/Paint.queue.manager/qm.ini" and changeLogType=LINEAR

C. Issue the MQSC command ALTER QMGRLOGTYPE(LINEAR)

D. Recreate queue manager withcrtmqm -c "Paint shop" -ll -q Paint.queue.manager

Answer: D

QUESTION NO: 56

Which Eclipse version is a prerequisite to use MQ Explorer to administer IBM WebSphere MQ

V7.0 on Windows?

A. 3.3

B. 3.2

C. 3.1

D. 3.0

Answer: A

QUESTION NO: 57

Refer to the Exhibit for the setup of queue managers in a company. An application connected to

QMGR1 needs to send messages to queue QMGR3.LOCAL. The administrator creates the

following definition on QMGR1: DEFINE QREMOTE(QMGR3.REMOTE) +RQMNAME(QMGR3)+

RNAME(QMGR3.LOCAL) + XMITQ(QMGR2) The application puts 7000 messages upon starting

onQMGR3.REMOTE which results on a queue full condition on QMGR3.LOCAL. Where would the

excess messages end up?

A. QMGR2.DEAD

B. QMGR3.DEAD

C. Transmit Queue QMGR2

D. Transmit Queue QMGR3

Answer: B



Actu

alTe

sts.

com

QUESTION NO: 58

Which of the following are performance enhancements to the Java Message Service provider

implementation in IBM WebSphere MQ V7.0?

A. Read Ahead

B. Support for channel exits written in C/C++

C. Asynchronous Put

D. Message selection performed by Queue Manager

E. Ability to access all MQMD fields for IBMWebSphere MQ messages.

Answer: A,C,D

QUESTION NO: 59

A receiver channel was defined with MCAUSER set to blank and PUTAUT set to CTX. Which of

the following statements is true?

A. The MCA will put messages with full administrative authority.

B. The MCAUSER value is dynamically set with the user ID extracted from the message header.

C. The messages cannot be sent through the sender/receiver channels since the MCAUSER

value is blank.

D. The user ID is extracted from the message header and this user ID is used by MQ to make

authorization decisions.

Answer: D

QUESTION NO: 60

Which of the following would occur if an administrator ran the MQSC command REFRESH

SECURITY TYPE(SSL)?

A. All newly-created channels were restarted.

B. The cached view of the SSL key repository was updated.

C. Changes to users OS authority were recognized.

D. Changes of IBMWebSphere MQ security with OAM take effect.

Answer: B

QUESTION NO: 61



Actu

alTe

sts.

com

Which command dumps the security authorization of an MQ object in a readable format?

A. listmqaut

B. dmpmqaut

C. setmqaut

D. dumpmqaut

Answer: B

QUESTION NO: 62

The operations team is taking responsibility for managing queue managers on an AIX

development server. The team wants to determine the security settings of each queue manager's

channels. Apart from checking for SSL configuration where else should they check?

A. Check the AMQCLCHL.TAB file for channel exits in use

B. Check for channel exits in the security access table for each queue manager

C. Check theExitPath stanza in the qm.ini file for channel exits for each queue manager

D. Look for channel exits in use in the path pointed to by the environment variable EXITPATH

Answer: C

QUESTION NO: 63

To make sure a SSL enabled channel can start successfully, the Distinguished Name (DN) of the

certificate received from the peer queue manager or client must match the value of which channel

attribute?

A. SSLUSER

B. SSLCIPH

C. SSLPEER

D. SSLCAUTH

Answer: C

QUESTION NO: 64

In order to grant authority for user appuser1 to Q1, the following commands were issued in

sequence. setmqaut -m qmgr1 -n Q1 -t queue -p appuser1 +put +get setmqaut -m qmgr1 -n Q1 - t

queue -p appuser1 +crt setmqaut -m qmgr1 -n Q1 -t queue -p appuser1 -all setmqaut -m qmgr1 -n

Q1 -t queue -p appuser1 +browse What access authority does user appuser1 have to the queue

Q1?



Actu

alTe

sts.

com

A. browse

B. browse andcrt

C. put, get and browse

D. put, get,crt and browse

Answer: B

QUESTION NO: 65

Which one of the following commands will allow an administrator to enter PCF commands to be

issued to the z/OS remote queue manager called QMGZ?

A. runmqsc -x QMGZ

B. runmqsc -x -w 30 QMGZ

C. runmqsc -x -v -w 30 m QMGZ

D. runmqsc QMGZ -xpcf -w QMGZ

Answer: B

QUESTION NO: 66

The administrator has been asked to take a back up of log files to free up log space on the disk for

a queue manager running with linear logging. Which runmqsc commands will be used to

determine the superfluous (inactive) log files? 1. DISPLAY QMGR 2. DISPLAY QMSTATUS

CURRLOG 3. DISPLAY QMSTATUS RECLOG 4. DISPLAY QMSTATUS MEDIALOG

A. (1) and (2)

B. (2) and (4)

C. (3) and (4)

D. (1) and (3)

Answer: C

QUESTION NO: 67

An administrator needs to configure a queue manager to coordinate an applications DB2 database

updates and message handling as global units of work. How does the administrator configure the

queue manager to use the switch load file db2swit on AIX?

A. ALTER QMGRXASWITCH(db2swit)

B. ALTER QMGRCOORD(db2swit)



Actu

alTe

sts.

com

C. addSwitchFile=db2swit to the XAResourceManager stanza of the queue managers qm.ini

D. addSwitchFile=db2swit to the XATransactionManager stanza of the queue managers qm.ini

Answer: C

QUESTION NO: 68

An application deployed on z/OS was causing frequent abends. Which of thefollowing options from

the IPCS Dump Component Panel can an administrator use to analyze the problem?

A. CSQWDMP

B. ASMCHECK

C. DIVDATA

D. DAEDATA

Answer: A

QUESTION NO: 69

In a business integration solution, messages are exchanged between the sending application

using JMS, and a receiving application using the native WebSphere MQ API. An administrator

executes the following command to create an object. InitCtx> define q(D_Q1) queue(Q1)

targclient(MQ) Which one of the following statements is true?

A. The MQRFH2 is added in the messages in Q1.

B. The MQRFH2 is stripped from the messages in Q1.

C. The receiving application must be able to add the MQRFH2.

D. The receiving application must be able to strip the MQRFH2.

Answer: B

QUESTION NO: 70

An application connected to queue manager QMA needs to put messages on queues defined on

queue manager QMB. If this application intends to specify QMB as the queue manager name in

the MQMD, which of these sets of commands will set up the communications infrastructure

properly?

A. DEFINECHANNEL(TO.QMB) CHLTYPE(SDR) XMITQ(QMB)

DEFINE QLOCAL(QMB) TYPE(XMITQ)

B. DEFINECHANNEL(TO.QMB) CHLTYPE(SDR) XMITQ(QMB)

DEFINE QLOCAL(QMB) USAGE(XMITQ)



Actu

alTe

sts.

com

C. DEFINECHANNEL(TO.QMB) CHLTYPE(SDR) XMITQ(QMB)

DEFINE QLOCAL(QMB) REMOTE(XMITQ)

D. DEFINECHANNEL(TO.QMB) CHLTYPE(SDR) XMITQ(QMB)

DEFINE QREMOTE(QMB) USAGE(XMITQ) RQMNAME(QMB)

Answer: B

QUESTION NO: 71

An application is putting messages on queue TEST.QUEUE. The queue manager is running on

mydomain.company.com listening on the default port. The IBM WebSphere MQ Bridge for HTTP

was deployed under the context WMQBridge in an IBM WebSphere Application Server listening

on port 9082 on the same machine. How can an AJAX application running on a remote machine

perform a destructive get of messages from TEST.QUEUE?

A. Issue an HTTP POST to URI

http://mydomain.company.com:1414/WMQBridge/msg/queue/TEST.QUEUE

B. Issue an HTTPGET from URI


C. Issue an HTTPGET from URI


D. Issue an HTTP DELETE from URI


Answer: D

QUESTION NO: 72

An administrator will install IBM WebSphere MQ on an AIX platform. There is a requirement to

configure the installation to store the queue managers data files under a directory tree different

from the default specified by the installation. After creating the appropriate directory tree, the

administrator should:

A. specify the file location using the -ld option when running the crtmqm command.

B. add an entry for the variable MQSPREFIX in /var/mqm/service.env before running the crtmqm

command.

C. edit /var/mqm/mqs.ini to specify LogDefaultPath in the LogDefaults stanza before running the

crtmqm command.

D. edit /var/mqm/mqs.ini to specify DefaultPrefix in the AllQueueManagers stanza before running

the crtmqm command.



Actu

alTe

sts.

com

Answer: D

QUESTION NO: 73

An application publishes persistent stock quote messages every 5 seconds. The subscribers are

only interested in the latest quotes. During the tests, it is found that the message delivery speed is

slow. In order to improve the application performance, which of the following actions is

appropriate?

A. Setnonpersistent in MQMD.

B. Implement MQ high availability

C. Increase the maximum message length.

D. Reduce the number of stock quote subscribers.

Answer: A

QUESTION NO: 74

An administrator needs to start three channels (QM1.TO.QM2, QM1.TO.QM3 and QM1.TO.QM4)

simultaneously whenever a message is placed on queue QLOCAL on QM1. QLOCAL has been

set for triggering with trigger type as first. Which actions will accomplish this task?

A. Triggering more than one channel simultaneously is not possible.

B. Modify the trigger monitor interface program (TMI) to handle 3 channels simultaneously.

C. Modify the QLOCAL definition to include all channel names in trigger data attribute and initiation

queue as SYSTEM.CHANNEL.INITQ.

D. Modify the QLOCAL definition to include the name of the process definition which will execute a

script containing MQSC commands to start all channels and initiation queue as INITQ to be

monitored by trigger monitor process.

Answer: D

QUESTION NO: 75

What object must be running to handle inbound connection requests to start receiver channels?

A. service

B. listener

C. channel Initiator

D. process definition



Actu

alTe

sts.

com

Answer: B

QUESTION NO: 76

A company has its retail business applications running on IBM WebSphere MQ infrastructure

across heterogeneous platforms. After a recent failure, the company set up a failover mechanism

where a centrally located z/OS server hosts the main application and applications on other servers

connect to the main application using distributed queuing. What term best describes this topology?

A. Star

B. Cluster

C. Point to Point

D. Hub and Spoke

Answer: D

QUESTION NO: 77

An administrator has created the following

MQ objects on two systems:

SYSTEM A crtmqm -C "VEGGIE QUEUE MANAGER" -LL -Q -D POTATO VEGGIE DEFINE

QR(APPLE) RQMNAME(FRUIT) RNAME(PEACH) DEFINE QL(DLQ) DEFINE QL(POTATO)

USAGE(XMITQ) DEF CHL('VEGGIE.FRUIT') CHLTYPE(SDR) TRPTYPE(TCP)

CONNAME('9.84.100.7(1414)') + XMITQ('POTATO')

SYSTEM B crtmqm -C "FRUIT QUEUE MANAGER" -LL -Q -D GRAPE FRUIT DEFINE

QL(GRAPE) USAGE(XMITQ) DEFINE QL(PEACH) DEF CHL('VEGGIE.FRUIT')

CHLTYPE(RCVR) TRPTYPE(TCP) An application connects to queue manager VEGGIE and puts

a message to queue APPLE. On which queue does the message get delivered before it gets

picked up by the sender channel?

A. POTATO

B. APPLE

C. GRAPE

D. PEACH

Answer: A

QUESTION NO: 78

A company has decided to convert some of their existing queue managers to be full repositories

for a new cluster they are creating. Which of the following statements is correct regarding the



Actu

alTe

sts.

com

selection of the company's queue managers to be a full repository?

A. One full repository is ideal for a cluster

B. Queue managers on z/OS are well suited to be full repositories

C. Once a queue manager is a full repository for one cluster it cannot be a member of another

cluster

D. All full repository queue managers need to be stopped simultaneously for maintenance

Answer: B

QUESTION NO: 79

An administrator has discovered that the primary queue manager (PRIME) has been corrupted

and is no longer usable. The queue manager was created with the command: crtmqm PRIME.

What does the administrator need to do to recover the queue manager?

A. Restart the queue manager.

B. Issue the command:amqrecover PRIME.

C. Manually delete the file containing the damaged object and restart the queue manager.

D. Restore the last backup of the queue manager data and log, and restart the queue manager.

Answer: D

QUESTION NO: 80

Which of the following mechanisms can be used to set up message data compression across

channels?

A. Auto definition exits

B. Send and receive exits

C. MessageExit stanza in qm.ini

D. Channelattribute COMPMSG

E. Queue manager attributeChannelInitiatorControl

Answer: B,D

QUESTION NO: 81

An administrator creates the following MQ objects on two queue managers, QM1 and QM2. An

application connects to QM1 and puts a message on queue REM.BLUE. Where does the

message arrive? On QM1: DEF QL(BLUE) DEF QR(REM.BLUE) RNAME(BLUE)

RQMNAME(QM1.ALIAS) XMITQ(QM2) DEF QL(QM2) USAGE(XMITQ) DEF



Actu

alTe

sts.

com

CHL(QM1.TO.QM2) CHLTYPE(SDR) TRPTYPE(TCP)+CONNAME('9.20.9.32(1412)')

XMITQ(QM2) DEF CHL(QM2.TO.QM1) CHLTYPE(RCVR) TRPTYPE(TCP) On QM2: DEF

QR(QM1.ALIAS) RNAME(' ') RQMNAME(QM1) XMITQ(QM1) DEF QL(QM1) USAGE(XMITQ)

DEF CHL(QM2.TO.QM1) CHLTYPE(SDR) TRPTYPE(TCP)+ CON

E('9.20.9.32(1413)')XMITQ(QM1) DEF CHL(QM1.TO.QM2) CHLTYPE(RCVR) TRPTYPE(TCP)

DEF QL(BLUE)

A. On BLUE queue on QM2

B. On BLUE queue on QM1

C. On QM1 queue on QM2

D. On dead-letter queue on QM1

Answer: B

QUESTION NO: 82

What two environment variables can be set in a IBM WebSphere MQ client environment to direct a

IBM WebSphere MQ application to use a client connection definition table?

A. MQTABLIB and MQCHLTAB

B. MQSERVER and MQCHLTAB

C. MQCHLLIB and MQSERVER

D. MQCHLLIB and MQCHLTAB

Answer: D

QUESTION NO: 83

A company has decided to add all its standalone queue managers into an existing cluster

environment. Some of the standalone queue managers have been part of the cluster in the ast.

What steps need to be completed to accomplish this task?

A. -Define a receiver channel on the queue manager being added

-Define a sender channel on the queue manager being added

-Restart the cluster repository queue managers

B. -Suspend the cluster repository queue managers

-Define a cluster channel on the queue manager being added

-Resume the cluster repository queue managers

C. -Define a cluster receiver channel on the queue manager being added

-Define a cluster sender channel on the queue manager being added

-Issue the REFRESH CLUSTER command on the queue manager being added



Actu

alTe

sts.

com

D. -Define a client receiver channel on the queue manager being added

-Define a client sender channel on the queue manager being added

-Issue the RESTART CLUSTER command on the queue manager being added

Answer: C

QUESTION NO: 84

An administrator has been asked to create a queue manager alias for QM1 to be used for

communication between remote queue managers. What MQSC command will create the queue

manager alias?

A. DEFQR(QM1.ALIAS) RNAME('Q1') RQMNAME(' ') XMITQ(QM1)

B. DEFQR(QM1.ALIAS) RNAME(' ') RQMNAME(QM1) XMITQ(QM1)

C. DEFQR(QM1.ALIAS) RNAME('Q1') RQMNAME(QM1) XMITQ(' ')

D. DEFQL(QM1.ALIAS) RQMNAME(QM1)

Answer: B

QUESTION NO: 85

Which attribute is checked first by the cluster workload management algorithm when determining

the destination for messages being put onto a cluster queue?

A. Queue rank

B. Queue priority

C. Channel rank

D. Channel priority

Answer: C

QUESTION NO: 86

An administrator is configuring communication between two queue managers, QM1 and QM2, and

wants to create a remote queue on QM1 pointing to a local queue Q2 on QM2. Which one of the

following MQSC commands will achieve this?

A. DEFINEQR(Q1) LIKE(Q2) RNAME(Q2) RQMGR(QM2)

B. DEFINEQR(Q1) RNAME(Q2) RQMNAME(QM2) XMITQ(QM2)

C. DEFINEQR(Q1) RNAME(QM2) RQMNAME(QM2) XMITQ(QM2)

D. DEFINEQL(QM1) USAGE(REMOTE) RNAME(Q2)+RQMNAME(QM2) XMITQ(QM2)



Actu

alTe

sts.

com

Answer: B

QUESTION NO: 87

An administrator has created a client channel definition table on a IBM WebSphere MQ V7.0

queue manager. Which of the following statements are true? The client channel definition table

(CCDT) can be used by a WebSphere MQ Client:

A. running in aWebSphere MQ V7.0 client environment to connect to a WebSphere MQ V6.0

queue manager

B. running in aWebSphere MQ V7.0 client environment to connect to a WebSphere MQ V7.0

queue manager

C. running in aWebSphere MQ V6.0 client environment to connect to a WebSphere MQ V7.0

queue manager

D. running in aWebSphere MQ V6.0 client environment to connect to a WebSphere MQ V6.0

queue manager

E. running in aWebSphere MQ V5.3 client environment to connect to a WebSphere MQ V7.0

queue manager

Answer: A,B

QUESTION NO: 88

An administrator was asked to restrict the IBM WebSphere MQ trace file size on AIX to 10 MB.

How can the administrator do this?

A. Use the commandsetmqscp

B. Use the environment variable MQS_TRACE_OPTIONS

C. Pass the value as a parameter tostrmqtrc

D. Set theMaxSize parameter under Trace Stanza

Answer: C

QUESTION NO: 89

An administrator created a queue manager for an application using the command: crtmqm

TESTQMGR The application is started by triggering, and puts forty 3.5MB persistent messages

onto a remote queue. The administrator is notified that the IBM WebSphere MQ error logs are

getting populated with errors whenever the application is started. What could be the likely cause?

A. The file system /var/mqm is getting full.



Actu

alTe

sts.

com

B. The remote queue file size is reaching its limit.

C. The queue manager logs are getting full frequently.

D. The messages are ending up on the dead letter queue.

Answer: C

QUESTION NO: 90

Queue managers QMGR1 and QMGR2 are members of cluster QMCLUS. An application

connected to QMGR1 needs to send messages to a local queue APP.LOCAL of QMGR2. The

administrator creates the following definitions: On QMGR1: DEFINE QALIAS(APP.ALIAS) +

TARGET(APP.LOCAL) + CLUSTER(QMCLUS) On QMGR2: DEFINE QLOCAL(APP.LOCAL) +

MAXDEPTH(50000) The administrator is notified that the application is unable to send messages

to APP.LOCAL. What is the most likely cause?

A. The cluster channels have not been started.

B. The QALIAS cannot be defined on a cluster.

C. The queue APP.LOCAL is not a cluster queue.

D. The SYSTEM.CLUSTER.TRANSMIT.QUEUE is full.

Answer: C

QUESTION NO: 91

An IBM WebSphere MQ client application puts messages onto remote queue RQ on queue

manager QM1, which resolves to the local queue LQ on queue manager QM2. A new version of

the application has been deployed that has the capability to put messages greater than 4MB. The

administrator changed the max message length attributes for the queue managers, transmission

queue, sender-receiver channels and LQ to handle the larger messages. The administrator was

later notified that messages greater than 4MB are still not reaching LQ. The most likely cause of

the problem is the max message length attribute:

A. in file qm.ini was not changed

B. of RQ was not changed

C. of the server connection channel was not changed

D. was not set on the environment variable MQSERVER

Answer: C

QUESTION NO: 92



Actu

alTe

sts.

com

Two queue managers, QMGR1 and QMGR2, are running on Windows connected by sender

receiver channels. An application connected to QMGR1 puts persistent messages on a remote

queue of QMGR1 destined for a local queue of QMGR2. The administrator is notified that the

messages have not reached QMGR2. On investigation the administrator notices that the server on

which QMGR2 runs has crashed and rebooted automatically. The administrator also notices that

the sender channel on QMGR1 is in an in doubt state. What action can the administrator take to

recover the messages?

A. Run the commandrsvmqtrn on QMGR2

B. Run the commandrunmqdlq on QMGR2

C. Run the MQSC command RESOLVEINDOUBT(channel name) on QMGR1

D. Run the MQSC command RESOLVECHANNEL(channel name) ACTION(BACKOUT) on

QMGR1

Answer: D

QUESTION NO: 93

An administrator deployed an IBM WebSphere MQ application on an AIX server which is causing

a lot of errors to be generated in the WebSphere MQ error logs. Which option should be used by

the administrator to increase the size of the IBM WebSphere MQ error logs?

A. Use the MQSC command ALTER QMGR

B. Use theQMErrorLog stanza in qm.ini

C. Recreate the queue manager specifying the new error log size as a parameter tocrtmqm

D. Set the environment variable AMQ_ERROR_LOG to the new size and recreate the queue

manager

Answer: B

QUESTION NO: 94

A queue manager QM1 on UNIX has an unrecoverable problem. The IBM Support Center has

asked the administrator to send any FFST reports. Which directory can an administrator get these

FFST files from?

A. /var/mqm/log

B. /var/mqm/trace

C. /var/mqm/errors

D. /var/mqm/qmgrs/QM1/errors

Answer: C



Actu

alTe

sts.

com

QUESTION NO: 95

An administrator has set up sender receiver channels between QMGR1 running on AIX and

QMGR2 running on i5/OS. During verification testing, the administrator noticed that messages

being sent from one queue manager are not visible on the other queue manager. Which of the

following files should the administrator look at to find the cause of the problem?

A. /var/adm/syslog on AIX

B. /var/mqm/errors/AMQ*.ERROR on AIX

C. /var/mqm/qmgrs/QMGR1/errors/AMQ*.LOG on AIX

D. /QIBM/UserData/@SYSTEM/errors/AMQ*.ERROR on i5/OS

E. /QIBM/UserData/mqm/qmgrs/QMGR2/errors/AMQ*.LOG on i5/OS

Answer: C,E

QUESTION NO: 96

Queue managers QMGR1, QMGR2 and QMGR3 are members of cluster QC. An administrator

created the following queues for an application: On QMGR1: DEFINEQALIAS(TEST.ALIAS) +

TARGET(TEST.LOCAL) + DEFBIND(OPEN) + DEFPSIST(NO) On QMGR2 and QMGR3:

DEFINE QLOCAL(TEST.LOCAL) + CLUSTER(QC) + DEFBIND(OPEN) + CLWLPRTY(0) +

CLWLRANK(0) +DEFPSIST(NO) The administrator verifies the setup by putting messages on

TEST.ALIAS using the sample amqsput program but notices that all messages end up on the

same queue manager (either QMGR2 or QMGR3). What could be the likely cause?

A. The queue TEST.ALIAS was not made part of the cluster.

B. The queue TEST.ALIAS was defined with the wrong DEFBIND option.

C. The CLWLWGHT attribute of the Cluster channels was not set to 50.

D. The CLWLPRTY was set to 0 instead of 50 on TEST.LOCAL in both the queue managers.

Answer: B

QUESTION NO: 97

It is important to the IBM WebSphere MQ operations team that none of their application queues

exceed seventy percent of the maximum number of messages the queues can hold. By default,

application queues are created with a maximum depth of one thousand messages. What

commands can the operations team use to monitor ROUTE_DATA_Q?

A. ALTER QMGRQDPHIEV(ENABLED) ALTER QLOCAL(ROUTE_DATA_Q) QDEPTHHI(70)

QDPHIEV(ENABLED)



Actu

alTe

sts.

com

B. ALTER QMGRPERFMEV(ENABLED) ALTER QLOCAL(ROUTE_DATA_Q) QDEPTHHI(70)

QDPHIEV(ENABLED)

C. ALTER QMGRPERFMEV(ENABLED) ALTER QLOCAL(ROUTE_DATA_Q) QDEPTHHI(700)

QDPHIEV(ENABLED)

D. ALTER QMGRQDPHIEV(ENABLED) ALTER QLOCAL(ROUTE_DATA_Q) QDEPTHHI(700)

QDPHIEV(ENABLED)

Answer: B

QUESTION NO: 98

An administrator has been asked to determine which files are needed to restart a queue manager

configured with linear logging. Which of the following MQSC commands will determine which log

files are still required?

A. DISPLAY QMGR

B. DISPLAY QMSTATUS

C. DISPLAY QMSTATUS ALL

D. DISPLAY QMGR RESTART

Answer: C

QUESTION NO: 99

Which features of IBM WebSphere MQ specifically provide robust message transport?

A. Data integrity, security, parallel processing

B. Asynchronous delivery, once and once-only delivery, persistent messaging

C. Time independence, no duplicate delivery, synchronous processing

D. Assured delivery, application parallelism, time dependent applications

Answer: B

QUESTION NO: 100

Which of the following statements are true, regarding applications that communicate via IBM

WebSphere MQ? IBM WebSphere MQ applications have to agree upon:

A. the platforms they are running on

B. the name(s) of the queue(s) used

C. the maximum number of messages sent within a given time period



Actu

alTe

sts.

com

D. the layout of the message data exchanged

E. the network protocol used

Answer: B,D

QUESTION NO: 101

QM2 and its objects have been recreated using the save queue manager definitions. The sender

channel on queue manager QM1 is in retry status with an error message AMQ9526: Message

sequence number error for channel 'QM1.TO.QM2'. Which action will recover the channel?

A. Reset the channel

B. Restart the sender channel

C. Restart the receiver channel

D. Recreate the objects using save queue manger definitions

Answer: A

QUESTION NO: 102

What are the advantages of using queue-sharing groups in IBM WebSphere MQ?

A. workload balancing, remote administration

B. improved performance, ease of monitoring

C. scalability, end-to-end security, data integrity

D. scalability, high availability, workload balancing

Answer: D

QUESTION NO: 103

For the Solaris platform, which databases are supported as a resource manager in transactions

coordinated by IBM WebSphere MQ V7.0?

A. Oracle,Derby, My SQL

B. DB2,Derby, Teradata

C. DB2, Oracle, Informix, Sybase

D. DB2, SQL Server, Sybase, Informix

Answer: C



Actu

alTe

sts.

com

QUESTION NO: 104

An administrator using WebSphere MQ Explorer is unable to connect to queue manager PROD

after it has been migrated, and receives error message SYSTEM .MQ EXPLORER. REPLY.

MODEL not defined. Which command will refresh the existing system objects to resolve this

issue?

A. strmqm c PROD

B. strmqm a PROD

C. strmqm ss PROD

D. strmqm si PROD

Answer: A

QUESTION NO: 105

The following restrictions have been placed on messages flowing from a banking application on

AIX to a data warehousing application on z/OS: -Partner authentication -Message encryption -

Maintenance of Data Integrity Which exits will fulfill these requirements?

A. Message exits

B. Security exits

C. Send / receive exits

D. SSL Conversion exits

E. Data Integrity exits

Answer: A,B,C

QUESTION NO: 106

What is the best way to create queue manager QM1 on UNIX so all developers can connect to it

without any authority checks being performed?

A. Edit the mqs.ini file to remove the Authorization Service Stanza

B. Create a group developer containing all developers, then add the group to themqm group

C. Create a group developer containing all developers, and then grant alladm authority to the

group using setmqaut

D. Set environment variable MQSNOAUT=yes, then create a queue managercrtmqm QM1

Answer: D



Actu

alTe

sts.

com

QUESTION NO: 107

Which of the following commands can the administrator use to get a list of all authority records for

a queue manager on Windows?

A. dmpmqaut

B. dspmqrte

C. dspmqaut

D. runmqcfg

Answer: A

QUESTION NO: 108

An application is designed to send messages to queues Q1 and Q2 on queue manager QM1

using a server-connection channel CH1. An administrator is asked to implement SSL on IBM

WebSphere MQ. On which of the following objects does the administrator need to specify the

SSLCIPH attribute?

A. CH1

B. QM1

C. Q1 and Q2

D. CH1 and QM1

Answer: A

QUESTION NO: 109

An administrator is asked to check whether existing channels with transport type of TCP are SSL

enabled. Which one of the following commands does the administrator need to use for this

purpose?

A. DISCHL(*) CHLTYPE SSLCIPH

B. DISCHL(*) CHLTYPE SSLPEER

C. DISCHL(*) CHLTYPE SSLCERTI

D. DISCHL(*) CHLTYPE SSLCAUTH

Answer: A

QUESTION NO: 110



Actu

alTe

sts.

com

An application wants to put messages onto a queue RQ on queue manager QM2 defined as

follows: DEFINE QREMOTE(RQ) XMITQ(XQ) RNAME(Q1) RQMNAME(QM1) Which of the

following objects does the authority checking occur on?

A. RQ

B. XQ

C. Q1

D. QM1

Answer: A

QUESTION NO: 111

An administrator defines three topics on queue manager on AIX: TAlpha with the topic string P/Q

TBeta with the topic string P/Q/R TSigma with the topic string P/Q/R/S The administrator then

grants authority to the topics as shown below. User1 - Publish and Subscribe on TAlpha User2 -

Publish on TBeta and Subscribe on TSigma. Which of the following options are possible for the

users to perform?

A. User1 can subscribe toTSigma

B. User1 can publish on topic string P/Q

C. User1 and User2 can publish on topic string P/Q/#

D. User2 can subscribe toTBeta

E. User2 can subscribe on topic string P/Q/R/#

Answer: A,B



Mq 7 System Admin 000-374

Documents

fix pack upgrade

awebsphere

awebsphere

websphere

websphere

ibmwebsphere

websphere

issue shell