1 HOW TO ORDER PARTS To assure prompt delivery when ordering parts, please furnish the following information: 1) Complete name and address of consignee. 2) Method of shipment preferred. 3) Is shipment to be prepaid or collect? 4) Serial numbers of units to which parts apply. 5) Complete part numbers and descriptions. 6) Any special instructions. Specify unit serial number when ordering parts! WARRANTY Etnyre Trailer Co. warrants to the original Purchaser, it’s new product to be free from defects in material and workmanship for a period of one (1) year after date of delivery to original Pur- chaser. The obligation of the Company is limited to repairing or replacing any defective part returned to the Company and will not be responsible for consequential damages or any further loss by reason of such defect. The company excludes all implied warranties of merchantability and fitness for a par- ticular purpose. There are no warranties, express or implied, which extend beyond the description of the goods contained in this contract. This warranty does not obligate the Company to bear the cost of machine transportation in connection with the replacement or repair of defective parts, nor does it guarantee repair or replacement of any parts on which unauthorized repairs or alterations have been made or for components not manufactured by the Company except to the extent of the warranty given by the original Manufacturer. This warranty does not apply to: (1) Normal start-up services, normal maintenance services or adjustments usu ally performed by the selling dealer, factory service representative or cus tomer personnel. (2) Any product manufactured by Etnyre Trailer Co. purchased or subjected to rental use. (3) Any product or part thereof which shows improper operation, improper maintenance, abuse, neglect, damage or modification after shipment from factory. (4) Any product or part thereof damaged or lost in shipment. Inspection for damage should be made before acceptance or signing any delivery docu ments releasing responsibility of the delivering carrier. This warranty and foregoing obligations are in lieu of all other obligations and liabilities in- cluding negligence and all warranties of merchantability or otherwise, express or implied in fact or by law. ETNYRE TRAILER CO., Oregon, Illinois 61061-9778 1333 South Daysville Road Phone: 800-995-2116 Fax: 800-521-1107 www.etnyre.com MP-RTN-01 Serial Number Q27423 thru Q28319 RTN SERIES TRAILER PARTS MANUAL R
57
Embed
MP-RTN-01 parts manual - E.D. Etnyre Parts Manual.pdf · Air Schematic For Gooseneck Connection ... 4 0120384 2 Washer-Lock, 0.50, Spring, PD ... MP-RTN-01 parts manual ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
HOW TO ORDER PARTS
To assure prompt delivery when ordering parts, please furnish the following information:1) Complete name and address of consignee. 2) Method of shipment preferred. 3) Is shipmentto be prepaid or collect? 4) Serial numbers of units to which parts apply. 5) Complete partnumbers and descriptions. 6) Any special instructions.
Specify unit serial number when ordering parts!WARRANTY
Etnyre Trailer Co. warrants to the original Purchaser, it’s new product to be free from defects inmaterial and workmanship for a period of one (1) year after date of delivery to original Pur-chaser. The obligation of the Company is limited to repairing or replacing any defective partreturned to the Company and will not be responsible for consequential damages or any furtherloss by reason of such defect.
The company excludes all implied warranties of merchantability and fitness for a par-ticular purpose. There are no warranties, express or implied, which extend beyond thedescription of the goods contained in this contract.
This warranty does not obligate the Company to bear the cost of machine transportation inconnection with the replacement or repair of defective parts, nor does it guarantee repair orreplacement of any parts on which unauthorized repairs or alterations have been made or forcomponents not manufactured by the Company except to the extent of the warranty given bythe original Manufacturer.
This warranty does not apply to:
(1) Normal start-up services, normal maintenance services or adjustments usually performed by the selling dealer, factory service representative or customer personnel.
(2) Any product manufactured by Etnyre Trailer Co. purchased or subjected torental use.
(3) Any product or part thereof which shows improper operation, impropermaintenance, abuse, neglect, damage or modification after shipment fromfactory.
(4) Any product or part thereof damaged or lost in shipment. Inspection fordamage should be made before acceptance or signing any delivery documents releasing responsibility of the delivering carrier.
This warranty and foregoing obligations are in lieu of all other obligations and liabilities in-cluding negligence and all warranties of merchantability or otherwise, express or implied infact or by law.
Always start and operate the engine in awell ventilated area;
If in an enclosed area, vent the exhaust tothe outside;
Do not modify or tamper with the exhaustsystem.
CALIFORNIA
Proposition 65 WARNING
Diesel engine exhaust and some of itsconstituents are known to the State ofCalifornia to cause cancer, birth defects, andother reproductive harm.
WARNING
Do not use this machine for any operationwhich is not described in this manual.
If you have any questions about operation ofthis machine, contact the Etnyre ServiceDepartment at1-800-995-2116 or 1-815-732-2116.
Operations that are not approved could causeserious injury or death.
Safety Precautions,Hazard Seriousness Level
You will find safety information boxes throughoutthis manual. These boxes contain information alertingyou to situations or actions to avoid.
Signal words (DANGER, WARNING and CAU-TION) are used to identify levels of hazard serious-ness. Their selection is based on the likely consequenceof human interaction with a hazard. Definitions of haz-ard levels are as follows.
DANGER - Immediate hazards which willresult in severe personal injury or death.
WARNING - Hazards or unsafe practiceswhich could result in severe personal injuryor death.
CAUTION - Hazards or unsafe practiceswhich could result in minor personal injury orproduct or property damage.
WARNING
FLUOROELASTOMER HANDLING
Some O-rings and seals used in this vehicleare made from fluoroelastomers, When usedunder design conditions, fluoroelastomers donot require special handling. However, whenfluoroelastomers are heated to temperaturesbeyond their design temperature (around 600ºFahrenheit), decomposition may occur with theformation of hydrofluoric acid. Hydrofluoric acidcan be extremely corrosive to human tissue ifnot handled properly.
A degraded seal may appear as a charred orblack sticky mass, Do not touch either the sealor the surrounding equipment without wearingneoprene or PVC gloves if degradation issuspected. Wash parts and equipment with10% lime water (calcium hydroxide solution) toneutralize any hydrofluoric acid.
If contact with the skin occurs, wash theaffected areas immediately with water. Thenrub a 2.5 calcium gluconate gel into the skinuntil there is no further irritation, while seekingprompt medical attention.
Note to Physicians: For advice or treatment ofHF burns, call the DuPont Medical Emergencynumber, 1-800-441-3637
3
GE
NE
RA
LTable Of Contents
How To Order Parts ........................................................... 1Safety Precautions, ........................................................... 2Hazard Seriousness Level ................................................ 2General Identification ........................................................ 4Decal Location .................................................................. 5Gooseneck Assemblies ..................................................... 6Gooseneck Cover - 35t and 55T ....................................... 8Chain & Binder Mtg-installation ......................................... 9Fender Installation .......................................................... 10Spare Tire Carrier ........................................................... 11Power Pack Installation ................................................... 12Hydraulic Installation ....................................................... 14Hydraulic Wet Lines ........................................................ 15Air Schematic For Gooseneck Connection ..................... 16Air Schematic 2 Axle w/2S2M ABS ................................. 17Air Schematic 3 Axle w/2S2M ABS ................................. 18Air Schematic 3 Axle w/o ABS ........................................ 19Auxiliary Air Group .......................................................... 20Manual Lowering (Tandem) ............................................ 20Auxiliary Air Group .......................................................... 21Air Group, Air Ride- Tandem ........................................... 22Air Group, Air Ride- Tridem ............................................. 23Air Group- Rear Connection- Suspension ...................... 24Air Group- Rear Connection- Brakes (Tridem) ................ 25Gooseneck Air Lock Installation ...................................... 26
Auto Ride Height - Plus 3- Minus 3 ................................. 27Ramp Assemblies ........................................................... 28Ramp Assembly .............................................................. 29Extension Bracket Installation - Q493544 ....................... 30Extension Bracket Installation - Q491551 & Lash Ring .. 31Electrical System - Lights ................................................ 32Electrical Group-ard Attachment ..................................... 33Flasher Kit - Turn Signals Standard Or LED ................... 34Flasher Kit- Rear Amber Lights Only Standard Or LED .. 35Electrical Schematic-ABS 2S/2M .................................... 36Axle ................................................................................. 37Air Chamber - Slack Adjuster .......................................... 38Brake Assembly- 16-1/2 X 7 ........................................... 39Hub & Drum Assembly .................................................... 40Tire & Wheel Assembies ................................................. 41Wheelwell Covers ........................................................... 423rd Axle Arm Lift Assembly ............................................. 43Ridewell- Air Suspension 25,000 Lb.- 6451166 .............. 44Ridewell- Air Suspension 25,000 Lb.- 6451167 .............. 45Limit Chain Installation .................................................... 46Hendrickson- Air Suspension 25,000 Lb.- 6450710 ........ 47Hendrickson- Air Suspension 25,000 Lb.- 6450711 ........ 4835t Hutchinson 9700 Spring Suspension ........................ 49Stinger Assembly ............................................................ 51
4
DE
CA
LS
& ID
Specify Unit Serial No., Part No., & Part Description
GENERAL IDENTIFICATION
R
R
OPERATING INSTRUCTIONS
R
Bucket TroughFloor Plate
Boomwell
Rear Wheel Covers(Optional)
Power Pack Cover(Optional)
Power Pack Asm(Optional)
Hydraulic for Lift Arm
Cover(Optional)
Cam Asm
Ramp
Board - Apitong 6321035
Lash Ring
Extension Bracket
Wheel andTire Asm
Hubometer(Optional)
Splash Guard
Storage
Air Lock
Gooseneck Fender (Optional)
Gooseneck Fender(Optional)
R
R
Optional Flip AxleSee Parts Book No. ARD 10S-01
Stinger (Optional)Shown In Suspension Section
5
DE
CA
LS
& ID
Specify Unit Serial No., Part No., & Part Description
DECAL LOCATION
REF PART NO. QTY DESCRIPTION REF PART NO. QTY DESCRIPTION
3 Q509563 1 Link Asm-35 Ton, Blkhwk 2000Q509996 1 Link Asm-55 Ton, Blkhwk 2000Q502885 1 Link Asm-55 Ton, Blkhwk 2000Q509268 1 Link Asm-55 Ton, Blkhwk 2000
NOTE: Ref.# 19 includes Ref.#s 34, 35, 36 and 37.Ref.# 13 includes Ref.#s 38, 39, and 40.Ref.# 14 includes Ref.#s 41, 42, and 43.Ref.#s 35, 36 and 37 are in Kit # 6603012
OutletInlet
15
HY
DR
AU
LIC
Specify Unit Serial No., Part No., & Part Description
REF PART NO. QTY DESCRIPTION REF PART NO. QTY DESCRIPTION
REF PART NO. QTY DESCRIPTION REF PART NO. QTY DESCRIPTION
1-12/32"BLUE WIREGREEN WIREBLACK WIREBROWN WIRE
8/32" STRIP(7 PLACES)
1-4/32"WHITE WIRE
1-6/32"YELLOW WIRERED WIRE
MAIN CABLE STRIPPING DETAIL
SEE STRIPPING DETAIL FOR7 CONDUCTOR MAIN CABLE
1,2
1,2
3
22
22,23
24
24
24
25
25
25
25
3
4,5
4,5
6
10
13,2
18,19
18,19
17
2121
21
2113,2
16
1514
13,2
6,11,12
9
ATTENTION!Truck Lite parts listed are NOT AVAILABLEthrough the E.D. Etnyre Co. Therefore anyReplacement parts will need to be obtained through your nearest Truck-Lite Dealer or Midwest Truck Parts Ph: 1-800-934-2727
7,8
33
EL
EC
TR
ICA
L
Specify Unit Serial No., Part No., & Part Description
ELECTRICAL GROUP-ARD ATTACHMENTQ500023
(Optional)
REF PART NO. QTY DESCRIPTION REF PART NO. QTY DESCRIPTION
ATTENTION!Truck Lite parts listed are NOT AVAILABLEthrough the E.D. Etnyre Co. Therefore anyReplacement parts will need to be obtained through your nearest Truck-Lite Dealer or Midwest Truck Parts Ph: 1-800-934-2727
NOTE: Truck Lite Part is Ref.# 6.
34
EL
EC
TR
ICA
L
Specify Unit Serial No., Part No., & Part Description
12 A-20033 1 Air Spring Bolt Kit13 B-11613 2 Air Spring Plate
9.00 Ride Height
3,48
7
1211
10
13
All numbers given are Hendrickson SuspensionParts. For replacement, please contact yournearest Hendrickson Turner Dealer.
ATTENTION:
5
6
1,2
9
9
49
SU
SP
EN
SIO
N
Specify Unit Serial No., Part No., & Part Description
35T HUTCH 9700 SPRINGSUSPENSION ASSEMBLY
Q489303
REF PART NO. QTY DESCRIPTION REF PART NO. QTY DESCRIPTION
1 PD10382 4 Spring Assembly
49" (1245mm) 6 1/2" ***(165mm)
19" (483mm) Ref.**
H= 6 1/2" (165mm)CH= 6 1/8" (156mm)
43 1/2" (1105mm)43 1/2" (1105mm) H=*CH= 2" (51mm)
* Str/mt = 3 1/2" (89mm), Un/mt & Si/mt = 3 7/8" (99mm), Fl/mt = 5 1/2" (140mm)** Ref.:This dimension may vary with changes in springs, spring seat heights, etc.*** Recommended spring clearance
50
SU
SP
EN
SIO
N
Specify Unit Serial No., Part No., & Part Description
AIR OPERATED LOCK PINASSEMBLY
Q507150
REF PART NO. QTY DESCRIPTION REF PART NO. QTY DESCRIPTION
If you find inaccurate or confusing information in this manual, or justhave a suggestion for improvement, please let us know.
Mail or FAX this form to us at: E. D. ETNYRE & CO. 1333 S. Daysville Rd.Oregon, Illinois 61061 • Fax: 800-521-1107 • www.etnyre.comAttn: Service Manager
Date Sent ____________________________________________
Manual Number (upper right corner of front cover) __________________________________________________________
Manual Title _____________________________________________________________________
Explain the problem in the space below.Page Reference Paragraph Figure Problem (please be specific)
Number Number Number Number
K-525-01
R
Return to Trailer Index
WEBB Torque SpecificationsHUBS
(for Pilot Mounted Disc-Wheels)
8 - 10 Stud Hubs
Applies to M22 X 1.5 studs/two piece flange nut.
Read and Understand the installation, service and safety instructions manualbefore installing or servicing the hub. Failure to do so may result in personalinjury or death, and may result in a compromise of your vehicle’s safetythrough loss or failure of a wheel or compromise the braking system.
Use a torque wrench to assure proper torque, failure to do so will compromiseyour products service, life and safety. Under torque and over torque can causethread and/or nut damage, and may result in the loss of a wheel.
Recheck torque after the first 50 to 100 miles of service. Parts may seat natu-rally, causing the torque to drop. Proper torque is essential for the service, lifeand safety of this product.
DANGER
Recommended Torque Dry: 450 - 500 ft. lbs.
NOTE: All threads are right hand metric.
1. Tighten Flange Nuts to 50 ft. lb. using sequenceshown.
2. Check Disc-Wheel for proper positioning on padsand proper seating against flange.
3. Tighten Flange Nuts to recommended torque of450-500 ft-lbs using sequence shown.