Bosch Rexroth AG, RE 17042, edition: 2013-07 Project planning software Interactive Catalog System www.boschrexroth.com/ics Online Mounting elements for hydraulic cylinders RE 17042 Edition: 2013-07 Replaces: 13.06 Mounting elements Features Mounting elements: ▶ Plain clevis ▶ Swivel head ▶ Fork clevis ▶ Bearing bracket ▶ Clevis bracket and eye bracket ▶ Trunnion bracket ▶ Bolts Contents Features 1 Mounting element overview 2, 3 Dimensions: Swivel head CGK 4, 5 Clevis bracket CLCC 6, 7 Fork clevis CCKA 8 Eye bracket CLEA 9 Clevis bracket CLCB 10, 11 Trunnion bracket CLTA 12, 13 Swivel head CGKA 14 Swivel head CGKL 15 Swivel head CGKD 16, 17 Trunnion bracket CLTB 18, 19 Clevis bracket CLCA 20, 21 Clevis bracket CLCD 22, 23 Plain clevis CSA 24, 25 Swivel head CGA 26, 27 Swivel head CGAK 28, 29 Swivel head CGAS 30, 31 Fork clevis CCKB 32, 33 Swivel head CGKD 34, 35 Trunnion bracket CLTB 36, 37 Clevis bracket CLCA 38, 39 Clevis bracket CLCD 40, 41 H3121_d
44
Embed
Mounting elements for hydraulic cylinders · 2019-10-12 · Mounting elements 3/44 RE 17042, edition: 2013-07, Bosch Rexroth AG Assembly (symbolic representation) Denomination / type
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
ØAL = piston ØØMM = piston rod Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required 3) Cannot be re-lubricated4) Can be re-lubricated via lubricating hole in housing5) Dimensions may differ depending on the manufacturer6) C0 = static load rating of the swivel head7) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
����
�����
���
��
���
���
���
�
��
���
6/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Clevis bracket CLCC for series CD70/CG70 and CD210/CG210(dimensions in mm)
Dimensions: Clevis bracket CLCC for series CD70/CG70 and CD210/CG210(dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Bolt Ø m6 required (bolt and bolt lock are included in the scope of delivery)2) When mounted on the piston rod with CGK… or CGA3) When mounted on the cylinder base (mounting type "B")
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
���
�
��
���
�
��
��
��
��
��
�
��
��
Mounting elements 9/44
RE 17042, edition: 2013-07, Bosch Rexroth AG
Dimensions: Eye bracket CLEA for series CD70/CG70 and CD210/CG210(dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Lubricating nipple, cone head form A according to DIN 714122) Suitable for fork clevis type CCKA...3) When mounted on the cylinder base (mounting type "G")4) When mounted on the piston rod with CCKA...
1) Bolt Ø h6 required, suitable for swivel head CGKA... (bolt and bolt lock are included in the scope of delivery)2) m = weight of clevis bracket in kg3) Dimensions may differ from the standard depending on the manufacturer
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
��
��
�
!�!
!�!
"�
���
����
��
��
�
��
"�
��
��
���
"�#$#�
12/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Trunnion bracket CLTA - AT 4 for series CDT3/CGT3/CST3(dimensions in mm)
CLTA 12-20
or
ØAL = piston Ø1) Lubricating nipple, cone form A according to DIN 714122) Inside3) Dimensions may differ depending on the manufacturer4) Nominal force applies to applications in pairs5) m = weight per pair in kg, brackets are delivered in pairs
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
ØAL = piston Ø1) Lubricating nipple, cone form A according to DIN 714122) Inside3) Dimensions may differ depending on the manufacturer4) Nominal force applies to applications in pairs5) m = weight per pair in kg, brackets are delivered in pairs
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
or
Dimensions: Trunnion bracket CLTA - AT 4 for series CDT3/CGT3/CST3(dimensions in mm)
1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø h6 required3) Cannot be re-lubricated4) Can be re-lubricated via lubricating hole5) Swivel head according to ISO 8132, bolt Ø m6 required6) Dimensions may differ from the standard depending on
the manufacturer7) MA = tightening torque The swivel head must always be screwed against the shoulder of
the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
8) m = weight of swivel head in kg9) C0 = static load rating of the swivel head10) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
&
��
��
��
�
��
��
�
�
�
� �
Mounting elements 15/44
RE 17042, edition: 2013-07, Bosch Rexroth AG
Dimensions: Swivel head CGKL for series CDL2(dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) m = weight of swivel head in kg2) C0 = static load rating of the swivel head in kN3) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
�
��
��
��
��
��
�&
��
��
��#��
�
�
�
16/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Swivel head CGKD (clampable) for series CDL2(dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required3) MA = tightening torque in Nm The swivel head must always be screwed against the shoulder of
the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque
4) m = weight of swivel head in kg5) C0 = static load rating of the swivel head in kN6) Fadm = maximum admissible load on the swivel head in kN during oscillatory or alternating loads
Dimensions: Swivel head CGKD (clampable) for series CDL2(dimensions in mm)
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.The trunnion brackets are suitable for mounting type MT4.
Dimensions: Trunnion bracket CLTB for series CDL2(dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Lubricating nipple, cone head form A according to DIN 714122) Contact surface trunnion (inside)3) Bearing blocks are always supplied in pairs4) Nominal force applies to applications in pairs5) m = weight of trunnion bracket in kg (specified per pair)
Dimensions: Clevis bracket CLCA (clampable) for series CDL2(dimensions in mm)
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.The clevis brackets are suitable for mounting type MP5 and for mounting on the swivel head.
Dimensions: Clevis bracket CLCD (clampable) for series CDL2(dimensions in mm)
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.The clevis brackets are suitable for mounting type MP5 and for mounting on the swivel head.
ØAL = piston Ø1) Lubricating nipple, cone head form A according to DIN 714122) The plain clevis must always be screwed against the shoulder of
the piston rod3) m = weight of plain clevis in kg4) C0 = static load rating of the plain clevis5) Fadm = maximum admissible load on the plain clevis during oscillatory or alternating loads
Notice!The specified dimensions are maximum values and may differ depending on the manufacturer. The following values are excluded: CA, CK, EM, KK
ØAL = piston Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required; Bolt Ø j6 required with maintenance-free spherical bearing 3) The swivel head must always be screwed against the shoulder of
the piston rod4) m = weight of swivel head in kg5) C0 = static load rating of the swivel head6) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads
Dimensions: Swivel head CGA for series CDH1/CGH1/CSH1 and CDH3/CGH3/CSH3(dimensions in mm)
AL-Ø 40 … 280 mm
Notice!The specified dimensions are maximum values and may differ depending on the manufacturer. The following values are excluded: CH, CN, EN, EU, KK
Dimensions: Swivel head CGAK (clampable) for series CDH1/CGH1/CSH1 and CDH3/CGH3/CSH3(dimensions in mm)
ØAL = piston Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required; Bolt Ø j6 required with maintenance-free spherical bearing 3) MA = tightening torque The swivel head must always be screwed against the shoulder of
the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
4) m = weight of swivel head in kg5) C0 = static load rating of the swivel head6) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads
ØAL = piston Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required; Bolt Ø j6 required with maintenance-free spherical bearing 3) Dimensions may differ depending on the manufacturer4) MA = tightening torque The swivel head must always be screwed against the shoulder of
the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
5) m = weight of swivel head in kg6) C0 = static load rating of the swivel head7) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
ØAL = piston ØØMM = piston rod Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required (bolt and bolt lock are included in the scope of delivery and are not mounted upon delivery)3) MA = tightening torque The fork clevis must always be screwed against the shoulder of
the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
4) m = weight of the fork clevis in kg5) Without lubrication bore6) Upon request
�
��
��
��
��
��
�&
��
��
��#��
�
�
�
34/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Swivel head CGKD (clampable) for series CDH2/CGH2/CSH2 andCDM1/CGM1/CSM1 (dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Lubricating nipple, cone head form A according to DIN 714122) Bolt Ø m6 required3) MA = tightening torque The swivel head must always be screwed against the shoulder of
the piston rod. Afterwards, the clamping screws must be tightened with the specified tightening torque.
4) m = weight of swivel head in kg5) C0 = static load rating of the swivel head6) Fadm = maximum admissible load on the swivel head during oscillatory or alternating loads7) Bearing cannot be re-lubricated8) Not contained in the standard
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
!�!"�
���
��
������
� ��
"�
��
���
��
�� �
!�!"�#$#�
!�!"�
���
��
������
� ��
"�
��
���
36/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Trunnion bracket CLTB for series CDH2/CGH2/CSH2 and CDM1/CGM1/CSM1 (dimensions in mm)
ØAL = piston Ø1) Lubricating nipple, cone head form A according to DIN 714122) Contact surface trunnion (inside)3) Bearing blocks are always supplied in pairs4) Nominal force applies to applications in pairs5) m = weight of trunnion bracket in kg (specified per pair)6) Bearing blocks for piston Ø 160 and 200 mm, dimensions differ
for replacement transactions (CDM1 / CGM1 / CSM1 series 1X).Please consult us.
7) Upon request
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.The trunnion brackets are suitable for mounting type MT4.
��
��
���
��������
��
�%
��
�
���
��
�� ��
��
��
��
��
��
38/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Clevis bracket CLCA (clampable) for series CDH2/CGH2/CSH2 andCDM1/CGM1/CSM1 (dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Bolt Ø m6 required (bolt and bolt lock are included in the scope of delivery and are not mounted upon delivery)2) m = weight of clevis bracket in kg3) Upon request
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.
��
��
�� ��
��
��
�����
��
��
��
��
��
���
��
�
40/44 Mounting elements
Bosch Rexroth AG, RE 17042, edition: 2013-07
Dimensions: Clevis bracket CLCD (clampable) for series CDH2/CGH2/CSH2 andCDM1/CGM1/CSM1 (dimensions in mm)
ØAL = piston ØØMM = piston rod Ø1) Bolt Ø m6 required (bolt and bolt lock are included in the scope of delivery and are not mounted upon delivery)2) m = weight of clevis bracket in kg3) Upon request
Notice!Geometry and dimensions may differ depending on the manufacturer. In case of combination with other mount-ing elements, check the suitability.