This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Clean Room [CR] [CR] DIN ISO 14644-1 200,00€ 200,00€
• Housing stainless steel electropolished• Drive shaft and screws made of stainless steel• Version drive shafts selectable• Sealing made of EPDM• IP68 waterproof • Reversible (left/right)• Optional: ATEX certified Ex II 2 G/D c T5 100°C• Optional: Classified according to DIN 14644 for clean
A[1 to 6] [1] Shaft Ø 19 smooth 29,00€ [1] Shaft Ø 24 smooth 34,00€ [2] Shaft Ø 24 smooth 29,00€ [2] Shaft Ø 32 smooth 34,00€[3] Shaft Ø 14 with groove and tongue 14,00€ [3] Shaft Ø 19 with groove and tongue 18,00€[4] Shaft Ø 19 with groove and tongue 29,00€ [4] Shaft Ø 24 with groove and tongue 34,00€[5] Shaft Ø 24 with groove and tongue 29,00€ [5] Shaft Ø 32 with groove and tongue 34,00€
[6] Nonstandard shaft up to max. Ø 30 165,00€ [6] Nonstandard shaft up to max. Ø 35 175,00€
ATEX stirrer motor eco ATEX certificate Ex II 2 G/D c T5 100°CIP
68
Op
tio
n
IP68 eco 450 / eco 900
Stainless-steel shaft and IP68
eco 1800 / eco 3600
Stainless-steel shaft and IP68
IP Stainless-steel shaft and IP68 250,00€ Stainless-steel shaft and IP68 300,00€
• Aluminium housing anodised with grounding• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealing made of PTFE• With connector block:
• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection
Speed sensor S Sensor incl. mounting 185,00€ 195,00€
Clockwise rotation R Change in clockwise rotation 50,00€ 50,00€
Stainless-steel design E Stirrer drive in stainless steel On request On request
E
Stainless steel
• Aluminium housing anodised with grounding• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealing made of PTFE• With connector block:
• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection
Speed sensor S Sensor incl. mounting 170,00€ 170,00€
Clockwise rotation R Change in clockwise rotation 50,00€ 50,00€
Stainless-steel design E Stirrer drive in stainless steel On request On request
• Aluminium housing anodised with grounding• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealing made of PTFE• With connector block:
• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection
• Anodised aluminium housing• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealings made of PTFE• With connector block:
• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection
• Counterclockwise rotation• With agitator shaft and stirrer element eco-Cup
V
Cutting shaft
eco-Topmix 30 Price
for 30 litre hobbock, torque 4 Nm
Agitator shaft l=346mm d=16mm
eco-Cup 170 mm sliding hub
Breakthrought hobbock 35mm
Hole circle D85mm 4xd6,5mm
1.989,00€
eco-Topmix 60 Price
for 60 litre hobbock, torque 4 Nm
Agitator shaft l=521mm d=16mm
eco-Cup d=210mm sliding hub
Breakthrought hobbock 35mm
Hole circle D85mm 4xd6,5mm
2.089,00€
eco-Topmix 100 Price
for 100 litre barrel, torque 8 Nm
Agitator shaft l =726 mm d=20mm
eco-Cup d=260mm Sliding hub
Breakthrought barrel 35mm
Hole circle D85mm 4xd6,5mm
2.289,00€
eco-Topmix 200 Price
for 200 litre barrel, torque 16 Nm
Agitator shaft l=764mm d=20mm
eco-Cup d=320mm Sliding hub
Breakthrought barrel 45mm
Hole circle D125mm 4xd8,5mm
2.489,00€
eco-Topmix 1000 Price
for 1 000 litre IBC, torque 32 Nm
Agitator shaft I=780mm d=25mm
eco-Cup d=500mm Sliding hub foldable
Breakthrought IBC 45mm
Hole circle D125mm 4xd8,5mm
3.189,00€
eco-Topmix 600 Price
for 600 litre IBC, torque 32 Nm
Agitator shaft I=580mm d=25mm
eco-Cup d=500mm Sliding hub foldable
Breakthrought IBC 45mm
Hole circle D125mm 4xd8,5mm
2.989,00€
Complete stirring system zones 0/1 eco-Topmix Ex II 1/2 G Ex h IIC T6 Ga/Gb XEx II 1/2 D Ex h IIIC T85°C Da/Db X
• Anodised aluminium housing• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealings made of PTFE• With connector block:
• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection
• Counterclockwise rotation• With agitator shaft and stirrer element eco-Cup
Options Price
Speed sensor [S] 170,00€
Clockwise rotation [R] 50,00€
Stainless steel version [E] On request
Change to eco-Disc stirrer element [W] 40,00€
Cutting of agitator shaft [V] 50,00€Example: eco-Mix XXXX S R E
Clockwise rotation
Sensor
W
Stainless steel
Change stirrer element
V
Cutting shaft
Accessories eco-Traverse and eco-CapA
cce
sso
rie
s
Accessories eco-Series
Traverse TR[1 to 3]
[1] Traverse for 30-100 litre hobbock eco-Traverse 500 298,00
[2] Traverse for 200 litre barrel eco-Traverse 600 334,00
[3] Traverse for 600-1000 litre IBC eco-Traverse IBC 348,00
Cover DE[1 to 3]
[1] Cover for 10-20 litre container eco-Cap 10 430,00
[2] Cover with hatch for 30 litre container eco-Cap 30 550,00
[3] Cover with hatch for 100-200 litre container eco-Cap 200 750,00
DE[1] TR[1] DE[2] TR[2] DE[3] TR[3]
Lifting station eco-Station 30with agitator eco-Mix 30
Control panel
optional
Description netto/€
Lifting station eco-Station 30 1 996.50€
for 30 litre hobbock, cover stainless steel 380mm, lift control, automatic agitator switch-off and main air controller.
Technical data:DxWxH: 600 mm x 440 mm x 1335 mmATEX certificate zone 1: Ex II 2G c IIB T6Lifting force max. (without cover): 50 kgLifting height max.: 500 mmLifting speed max.: 100 mm/sIngoing air pressure max.: 0,6 MPa (6 bar)Colour: light greyWithout container
Agitator eco-Mix 30 1 289.00€
Complete stirring system for 30 litre hobbock comprising: Motor eco-Drive 450Agitator shaft: 346mm with 16mm diameterLength: 359mmStirrer element: eco-Cup 170mm sliding hub 16mmNeedle valve for speed setting
Air connection: 6mm pneumatic hose
Technical data: (30-300rpm)ATEX certificate zone 1: Ex II 2 G/D c T5 100°CAluminium housing anodisedOil- and silicone-freeAcetone-resistant sealing made of PTFEIP67 waterproofProtection against overload
amount 3 285.50€
Optional:
Control panel for lifting station Surcharge 384.00€incl. on-/off-switch
Zone separation flange for Atex zone 0/1 Surcharge 720.00€Ex II 1/2 G Ex h IIC T6 Ga/Gb X / Ex II 1/2 D Ex h IIIC T85°C Da/Db X
Lifting station eco-Station 200with agitator eco-Mix 200
Control panel
optional
Description netto/€
Lifting station eco-Station 200 2 385.00€
for 200 litre barrel, cover stainless steel 630mm, lift control, automatic agitator switch-off and main air controller.
Technical data:DxWxH: 800 mm x 700 mm x 2344 mmATEX certificate zone 1: Ex II 2G c IIB T6Lifting force max. (without cover): 80 kgLifting height max.: 1 000 mmLifting speed max.: 100 mm/sIngoing air pressure max.: 0,6 MPa (6 bar)Colour: light greyWithout container
Agitator eco-Mix 200 1 789.00€
Complete stirring system for 200 litre barrel comprising: Motor eco-Drive 1800Agitator shaft: 746mm with 20mm diameterLength: 777mmStirrer element: eco-Cup 320mm sliding hub 20mmNeedle valve for speed setting
Air connection: 8mm pneumatic hose
Technical data: (30-300rpm)ATEX certificate zone 1: Ex II 2 G/D c T5 100°CAluminium housing anodisedOil- and silicone-freeAcetone-resistant sealing made of PTFEIP67 waterproofProtection against overload
amount 4.174,00€
Optional:
Control panel for lifting station Surcharge 384.00€incl. on-/off-switch
Zone separation flange for Atex zone 0/1 Surcharge 720.00€Ex II 1/2 G Ex h IIC T6 Ga/Gb X / Ex II 1/2 D Ex h IIIC T85°C Da/Db X
Agitator my-ecoSt
ep
1
Mo
tor
wit
hfl
ange
solu
tio
n
Zone separation
flange
Zone separation
0/1
Nm Price
eco-TopDrive 450 4 1.692,00€
eco-TopDrive 900 8 1.756,00€
eco-TopDrive 1800 16 1.978,00€
eco-TopDrive 3600 32 2.365,00€
Ex II 1/2 G Ex h IIC T6 Ga/Gb XEx II 1/2 D Ex h IIIC T85°C Da/Db X
Bearing
flange
Zone 1 Nm Price
eco-Drive 450 4 918,00€
eco-Drive 900 8 1.038,00€
eco-Drive 1800 16 1.088,00€
eco-Drive 3600 32 1.534,00€
ATEX certificate Ex II 2 G/D c T5 100°C
Ste
p2
Dri
ve s
haf
t
Drive shaft eco-Drive/TopDrive 450/900
diameter 16mmPrice eco-Drive/TopDrive 1800/3600
diameter 20mmPrice
AW[1-2] [1] 0-300 mm 200,00€ 0-300 mm 250,00€
[2] 301-600 mm 300,00€ 301-600 mm 350,00€
[2] 601-1 000 mm 400,00€ 601-1 000 mm 450,00€
Ste
p3
Stir
rer
ele
me
nt
Price
eco-Cup EC[1-6]eco-Disc ED[1-6] See page 17 152,00€-
492,00€
Op
tio
ne
n
Code Bezeichnung Preis
KM Stainless steel nut with PTFE sealing –
pressure-tight (only zone 0/1)
€250
Agi
tato
r Agitator Price
eco-Lab 450 749,00€
eco-Lab 900 809,00€
Laboratory agitator eco-LabTr
ansm
issi
on
Transmission eco-Lab 450 / eco-Lab 900 Price
G[1 to 3] [1] 3:1 559,00€
[2] 9:1 895,00€
[3] 1:2 559,00€
ATEX certificate Ex II 2 G/D c T5 100°C
eco-Lab XXXX G[1-3] STExample:
Acc
ess
ori
es
Accessories eco-Lab 450 / eco-Lab 900 Price
Laboratory stand [ST] Laboratory stand 160,00€
EX propeller [ER] EX propeller 240,00€
EX feedthrough ED[1 to 2] [1] EX feedthrough NS29/32 for agitator shaft Ø 8mm 75,00€
[2] EX feedthrough NS29/32 for agitator shaft Ø 10mm 75,00€
ED[1-2]ER
Transmission
Laboratory stand
Propeller
Feedthrough
• Anodised aluminium housing with grounding• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealings made of PTFE• With connector block:
• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection
• Counterclockwise rotation• quick-action chuck for agitator shaft Ø 0-13mm• mounting bar Ø 12mm
• Interface RS232 or RS485• SG 30:
• 12 volts• 30mm gripping stroke• 30N closing force