1 4000 series from 750 kg to 3.5 t Motorcycle, vehicle and universal transport trailers
14000 series
from 750 kg to 3.5 t
Motorcycle, vehicle and universal
transport trailers
2
3
Maintain an overview
Table of Contents
Allow us to convince you ��������������������������������������������������������������������������������������������������������������� 4
On the street and at home ������������������������������������������������������������������������������������������������������������ 6
Motorcycle / small vehicle transporter
HM motorcycle transporter ������������������������������������������������������������������������������������������������������������10
KFT small vehicle / motorcycle transporter �������������������������������������������������������������������������������������14
Vehicle transporters
FTK tilting vehicle transporter ���������������������������������������������������������������������������������������������������������18
HKT lowering small vehicle transporter �������������������������������������������������������������������������������������������22
Imola flatbed trailer �����������������������������������������������������������������������������������������������������������������������26
Universal wheels-in vehicle transporter �������������������������������������������������������������������������������������������30
Hockenheim tilting flatbed trailer ��������������������������������������������������������������������������������������������������34
MTK tilting wheels-in trailer ����������������������������������������������������������������������������������������������������������38
Universal transporter
MTK Allcomfort tilting wheels-in trailer �����������������������������������������������������������������������������������������42
Senko elevating trailer ��������������������������������������������������������������������������������������������������������������������46
Rexus all-poly box trailer ����������������������������������������������������������������������������������������������������������������50
Optional accessories �����������������������������������������������������������������������������������������������������������������������54
We at Humbaur ����������������������������������������������������������������������������������������������������������������������������59
4
Allow us to convince you
Follow Humbaur!The expert in transport.
Matias Bjørndalen, car mechanic, Oslo
30 years of experience
For the past three decades, we have been among the leading
manufacturers of passenger vehicle trailers� Over 700,000 trailers
have left our premises since the establishment of our company� We
now manufacture approximately 50,000 units per year� You will be
able to discover this abundance of experience in each of our trailers�
High quality
Robust and long lasting – these are the qualities a trailer needs to
have� We achieve this goal by using excellent components and
first-class manufacturing processes� We inspect each trailer in de-
tail before delivering it�
Multiple transport solutions
Our products cover a particularly wide range of applications�
Both private and commercial customers can find a suitable trailer
for a large range of applications here� Choose between a
permissible gross weight of 750 kg to 40 t�
Large choice of accessories
Some of our customers have a lot of individual requirements for their
trailers� With our many suitable accessories, each customer can ex-
tend our comprehensive range of serial accessories to suit his needs�
Enthusiastic customer service
Your nearby specialist dealer can provide you with trailers up to
3�5 t� Owners of trailers with a gross weight of over 5 t can make
use of our direct service� Whether you need a spare part or have
questions about applications – we and your local dealer are there
to assist you�
High-quality components
Quality is in the detail, which is why Humbaur only makes use of
high-quality vehicle components made by well-known
manufacturers� We are continuously exchanging experiences with
our suppliers� This allows us constantly to optimise products�
Made in Germany
Whether you decide on one of our 420 serial models or
commission a special model customised to your individual
requirements: We develop and manufacture all our trailers in
accordance with the latest state of technology� You will receive
top-class »made in Germany«�
Our arguments make it easy for you to
become a convinced fan of high-quality
Humbaur products�
5
The 4000 series
This is exactly what you need to transport two motorcycles –
and a bit more� You can conveniently drive your motorcycles
onto the trailer, using broad rails with protective edges�
The loading height of 500 and 510 mm is low and the
drive-up angle is conveniently low� Brackets on the standing
rails stabilise your motorcycles, which can be secured for trans-
port using strong lashing eyelets�
HMmotorcycle transporter
The cargo bed of the KFT vehicle transporter is almost three
metres long� Two special ramps made of aluminium treat plates
help to move your vehicles safely onto the trailer� Its wooden
floor has anti-slip coating and can carry up to three motorcycles
or a small car� Fasten your vehicles safely, using the integrated
leashing eyelets� The continuous floor is, of course, also well-
suited to transporting other items�
The new, tilting FTK vehicle transporter by Humbaur allows you
to transport your vehicle conveniently and safely� The FTK now
also offers the advantages of tilting vehicle trailers in the
compact class� Ideal for vehicle service companies or private us-
ers wishing to transport small vehicles, e�g� a Smart or VW Golf�
You can mechanically tilt the bridge with shock absorbers and
effortlessly drive the vehicle onto the trailer over the aluminium
treat plate ramp� Also available with cable winch or tipping hy-
draulics (both optional)�
KFT small vehicle / motorcycle transporter
FTK tilting vehicle transporter
On the street and at home
Available as
single- and tandem
axle version!!
Our starter model has external wheels and a hot-dip galvanised
chassis� You will start to appreciate its extremely low loading
height of 435 mm straight away� You can conveniently drive
your vehicle into the trailer� The car will stand on rugged,
perforated steel plate rails that can also be used to lash it down�
A wide array of accessories considerably extends the application
spectrum, e�g� wheel stoppers, wheel clamping belts or a cable
winch�
Imola flatbed trailer
The hot-dip galvanised chassis and frame are topped by a
continuous floor plate with almost universal transport options�
You can load the Universal loader with two corrosion-protected
drive-up ramps� The width of the ramps can be adjusted, thus
accurately adapting them to the track width of the vehicle�
Thereafter, simply slide the ramps below the cargo bed� You have
seven lashing rings to fasten the load safely� You can at any time
retrofit the trailer with an aluminium instead of a wooden floor,
with aluminium sideboards or a tarpaulin with frame�
Universal wheels-in vehicle transporter
The new, multi-functional Humbaur HKT makes it easier to
transport small vehicles than ever before� All standard HKT trailers
models come equipped with a bolted, hot-dip galvanised chassis�
The hydraulically lowering cargo bed allows you to load and un-
load the trailer with ease and convenience, due to the very flat
drive-up angle� The rear edge of the ramp is characteristic of the
new single-axle HKT lowering trailer� In addition, the insertion
options at all corners are part of the standard equipment�
HKT lowering small vehicle transporter
By its extremely robust and long-lasting version the MTK single-
or tandem axle is becoming the perfect trailer for everyone who
transports vehicles professionally� With an allowable gross weight
between 1500 kg and 3500 kg you can transport also heavy ve-
hicles safely� The frame as well as the chassis is hot-dip galva-
nised� The cable winch, which is adjustable in longitudinal direc-
tion, is mounted on a strong winch frame� As the trailer is also
equipped with extendable, hot-dip galvanised steel ramps, you
can drive up the vehicle on a very low loading angle� Furthermore
an optimal hydraulic tilt the platform� For a safe tie down of the
load, the trailer is equipped with lashing possibilities in the lateral
external frame with a traction force of 400 kg each�
Vehicle transporter MTK
This trailer is really comfortable to use: You can tilt the hydrau-
lic platform easily by using the manual pump and gas springs
will support you during the handling of the ramp gate� By the
low loading height of 640 mm (single axle) or 650 mm (tan-
dem axle) the loading angle will stay very flat� Thereby you can
also load lower machines or cars without any problems� In or-
der to load the vehicles on the trailer without any difficulties, a
robust cable winch frame with cable winch is available option-
ally� The well-conceived chassis technology of the MTK Allcom-
fort ensure a really comfortable and quiet road performance�
Universal transporter MTK Allcomfort
On the street and at home
The indestructible Hockenheim car trailer has a tilting bridge with
a double-action hydraulic system� It supports lifting as well as
lowering� A cable winch mounted in front easily moves the
vehicle onto the trailer without using the vehicle’s engine� The
anti-slip perforated stand rails ensure a secure hold and thus
make it easy to tie down the load� Our engineers have also
advanced the chassis� It was designed for optimal road handling
and quiet driving performance�
Hockenheim tilting flatbed trailer
Available as sing-
le- and tandem axle
version!!Available as sing-
le- and tandem axle
version!!
This trailer can even be used to load vehicles with very little road
clearance� Simply use the hydraulics to lower the loading platform
either using a manual pump or - as an optional extra to make
your work even easier - with the help of an electric motor� The lo-
werable rubber spring axles will provide you with an extremely
shallow loading angle� The Senko is also enormously robust� The
drop sides made from 3-mm steel plate are strong enough to
handle even the heaviest loads� Each of the ten lashing rings has
been DEKRA-approved for a tensile load of 800 kg� Naturally, all
vehicle components have been hot-dip galvanised�
Senko elevating trailer
A trendy way to take your luggage to its destination: The
retro-design of the Rexus resembles a horse transporter� The Rexus
also makes use of the tried and trusted Champ chassis� Designer
lights with chrome rings, interior lights and pre-installed position
and end-outline marker lights as well as a lateral access door
emphasise its particular appearance� The inside of the tailgate is
covered with aluminium treat plate and supports up to 1,285 kg,
as confirmed by Dekra� What would you like to transport? Check
the list of accessories, because the Rexus can transport a wide
range of things�
9
Rexus all-poly box trailer
» We don't only have fans��� we have real followers!«
10
12
6
3
45
11
Your optimal partner for
motorcycling
HM motorcycle transporter
1 Square drawbar, hot-dip galvanised2 13-pin plug 3 Floor plate 15 mm thick4 2 stand rails with bracket, loose, 1 drive-on rail, loose5 4 lashing rings made of galvanised cast steel6 Humbaur multifunctional lighting
with reversing light
Model HM 752212
Body dimensions in mm 3663 x 1718 x 630
Internal dimensions in mm 2240 x 1276
Permissible gross weight in kg 750
Load capacity in kg 600
Load height in mm 500
Tyre size in inches 13
Drive-up angle 15°
Model HM 102212
Body dimensions in mm 3374 x 1738 x 635
Internal dimensions in mm 2240 x 1276
Permissible gross weight in kg 1000
Load capacity in kg 800
Load height in mm 510
Tyre size in inches 13
Drive-up angle 15°
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
12
1 Sturdy underride protection – specially designed for loading
and unloading 2 Square drawbar, hot-dip galvanised3 Generously dimensioned quality tyres ensure quiet running,
even on poor road surfaces
4000 series
1
3
2
13
HM motorcycle transporter
*Accessories (optional):
• 2x prop stands• Jockey wheel• Spare wheel • Wheel shock absorber, loose,
without 100 km/h confirmation • 7- to 13-pin adapter • Plug lock for unbraked trailers • Stand rail for motorcycle trailers,
with all mounting materials• Drive-on ramp for motorcycle
trailers, with all mounting materials
• Wheel shock absorber, mounted, with 100 km/h confirmation... Stand rail for motorcycle trailers,
with all mounting materials
15º
14
15
KFT small vehicle transporter
Designed for transporting small vehicles or
up to three motorcycles
1 V drawbar, hot-dip galvanised2 13-pin plug3 Floor plate 18 mm thick4 Lashing options integrated into side impact protection5 Jockey wheel6 Aluminium drive-on ramps7 Humbaur multifunctional lighting with
reversing light
3
4
5
2
67
6
Model KFT 1300
Body dimensions in mm 4239 x 2152 x 725
Internal dimensions in mm 2950 x 1650
Permissible gross weight in kg 1300
Load capacity in kg 1000
Load height in mm 500
Tyre size in inches 15
Drive-up angle 14°
Model KFT 1500
Body dimensions in mm 4239 x 2152 x 725
Internal dimensions in mm 2950 x 1650
Permissible gross weight in kg 1500
Load capacity in kg 1180
Load height in mm 500
Tyre size in inches 14
Drive-up angle 14°
16
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
1 Loading ramps made of aluminium treat plate 2 Optionally available wheel chocks for load securing3 Steel apron at the side with integrated lashing rings4 Ideal for 2 motorcycles, secured with additional lashing
ropes (optionally available)
4000 series
1
4
3
2
17
*Accessories (optional):
• 2x prop stands • Spare wheel • Wheel shock absorber, loose,
without 100 km/h confirmation• Fitted shock absorbers incl. 100 km/h confirmation• Wheel chock • 7- to 13-pin adapter • Cable winch frame and tackle
with winch and rope• Stand rail for motorcycle trailers,
with all mounting materials• Tarpaulin and frame, load height
1600 mm / 1800 mm
KFT small vehicle transporter
...optionally available wheel chocks
for load securing*
15º
18
19
It is indestructible, flexible and
really gets the work done
FTK tilting vehicle transporter
1 Chassis, bolted and galvanised2 Galvanised tipping platform3 Tipping platform with shock absorbers, mechanically tilting4 Aluminium drive-on ramps5 V drawbar, hot-dip galvanised6 13-pin plug7 Jockey wheel8 Optional cable winch frame and tackle with cable winch9 Optional wheel chock on the adjustable stand rails10 Humbaur multifunctional lighting with
reversing light
1
3
2 4
6
7
5
3
4
8
10
9
Model FTK 133520 FTK 153520
Body dimensions in mm 4880 x 2050 x 630 4880 x 2050 x 630
Internal dimensions in mm 3500 x 2000 x 50 3500 x 2000 x 50
Permissible gross weight in kg 1300 1500
Load capacity in kg 860 1060
Load height in mm 580 580
Tyre size in inches 10 10
Drive-up angle 10° 10°
Model FTK 204020 FTK 274020
Body dimensions in mm 5375 x 2050 x 630 5375 x 2050 x 630
Internal dimensions in mm 4000 x 2000 x 50 4000 x 2000 x 50
Permissible gross weight in kg 2000 2700
Load capacity in kg 1370 2070
Load height in mm 580 580
Tyre size in inches 10 10
Drive-up angle 9° 9°
20
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
4000 series
1 Optional wheel chock to secure the load2 Shock absorbers for mechanical tilting function3 + 4 Easy handling for attachment of aluminium
drive-on ramps
1
3 4
2
21
Accessories (optional):
• Cable winch frame and tackle• Wheel stop 360 mm • FTK spare wheel holder, loose • Spare wheel • Wheel shock absorber without
100 km/h confirmation• Wheel shock absorber incl.
100 km/h confirmation• 7- to 13-pin adapter • Vehicle lashing strap, 50 mm
strap width, 2500 mm length • Automatic jockey wheel • Hydraulic, with double-acting
cylinder for tilting the cargo bed • Spare wheel with bracket
FTK tilting vehicle transporter
22
23
HKT lowering small vehicle transporter
Designed for transporting motorcycles or
small vehicles�
1 Bolted, hot-dip galvanised chassis2 Cargo bed can be hydraulically lowered3 Mechanical safety lock of swivel axis when driving4 Humbaur multifunctional lighting with reversing light5 With rear ramp edge6 Rear numberplate holder can be folded away for loading purposes7 Wooden floor 15 mm8 Aluminium drop sides 150 mm hight with 4 integrated lashing rings
(tensile force 400 kg per lashing ring, tested by Dekra)9 Insertion options at all corners for cover frame, etc�10 13-pin plug
1
2
10
6
8
7
9
5
8
3
4
Model HKT 752515 S HKT 132515 S HKT 152515 S HKT 182515 S
Body dimensions in mm 4050 x 2250 x 660 4085 x 2250 x 660 4085x 2250 x 660 4085x 2250 x 660
Internal dimensions in mm 2500 x 1565 x 150 2500 x 1565 x 150 2500 x 1565 x 150 2500 x 1565 x 150
Permissible gross weight in kg 750 1350 1500 1800
Load capacity in kg 450 1018 1168 1450
Load height in mm 420 420 420 420
Tyre size in inches 13 13 13 13
Drive-up angle 6° 6° 6° 6°
Model HKT 132817 S HKT 152817 S HKT 182817 S HKT 133117 S
Body dimensions in mm 4410 x 2450 x 670 4410 x 2450 x 670 4410 x 2450 x 670 4610 x 2450 x 670
Internal dimensions in mm 2800 x 1765 x 150 2800 x 1765 x 150 2800 x 1765 x 150 3100 x 1765 x 150
Permissible gross weight in kg 1350 1500 1800 1350
Load capacity in kg 1000 1150 1410 985
Load height in mm 420 420 420 420
Tyre size in inches 13 13 13 13
Drive-up angle 5° 5° 5° 4°
Model HKT 153117 S HKT 183117 S
Body dimensions in mm 4610 x 2450 x 670 4610 x 2450 x 670
Internal dimensions in mm 3100 x 1765 x 150 3100 x 1765 x 150
Permissible gross weight in kg 1500 1800
Load capacity in kg 1135 1415
Load height in mm 420 420
Tyre size in inches 13 13
Drive-up angle 4° 4°
24
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
4000 series
1 Motorcycle rocker 2 Manual pump with oil tank3 The standard wooden floor can be replaced with an optional
aluminium floor
1
2
3
Model HKT 752515 S HKT 132515 S HKT 152515 S HKT 182515 S
Body dimensions in mm 4050 x 2250 x 660 4085 x 2250 x 660 4085x 2250 x 660 4085x 2250 x 660
Internal dimensions in mm 2500 x 1565 x 150 2500 x 1565 x 150 2500 x 1565 x 150 2500 x 1565 x 150
Permissible gross weight in kg 750 1350 1500 1800
Load capacity in kg 450 1018 1168 1450
Load height in mm 420 420 420 420
Tyre size in inches 13 13 13 13
Drive-up angle 6° 6° 6° 6°
Model HKT 132817 S HKT 152817 S HKT 182817 S HKT 133117 S
Body dimensions in mm 4410 x 2450 x 670 4410 x 2450 x 670 4410 x 2450 x 670 4610 x 2450 x 670
Internal dimensions in mm 2800 x 1765 x 150 2800 x 1765 x 150 2800 x 1765 x 150 3100 x 1765 x 150
Permissible gross weight in kg 1350 1500 1800 1350
Load capacity in kg 1000 1150 1410 985
Load height in mm 420 420 420 420
Tyre size in inches 13 13 13 13
Drive-up angle 5° 5° 5° 4°
Model HKT 153117 S HKT 183117 S
Body dimensions in mm 4610 x 2450 x 670 4610 x 2450 x 670
Internal dimensions in mm 3100 x 1765 x 150 3100 x 1765 x 150
Permissible gross weight in kg 1500 1800
Load capacity in kg 1135 1415
Load height in mm 420 420
Tyre size in inches 13 13
Drive-up angle 4° 4°
25
*Accessories (optional):
• Wheel shock absorber without 100 km/h confirmation
• Wheel shock absorber with 100 km/h confirmation
• Cover and frame, grey or blue, load-ing height 1600 mm / 1800 mm
• Cover and frame, blue, loading height 1600 mm / 1800 mm, for optional tailgate
• Motorcycle rocker • Spare wheel• 7- to 13-pin adapter • Plug lock for unbraked trailers • Drop sides 350 mm• HKT tailgate instead of ramp
edge• Tool box on drawbar
HKT lowering small vehicle transporter
...optional motorcycle rockerto secure the load*
4 / 5 / 6 ºdepending on
model
26
27
Imola flatbed trailer
Always an advantage for vehicles
1 V drawbar hot-dip galvanised2 Chassis and frame are hot-dip galvanised3 13-pin plug4 Lashing options at the side perforations and stand rails5 Jockey wheel6 Humbaur multifunctional lighting with reversing light7 Aluminium ramps
1
2
3
6
5
4
4
7
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
28
4000 series
1 Secure positioning of transported load due to perforated plate
stand rails2 Aluminium treat plate ramps inserted into rear frame (transport
position)3 Lighting with impact protection; drive-on ramps can be inserted
at rear.4 Optimal corrosion protection ensured by hot-dip galvanised frame
and chassis
Model Imola 2000
Body dimensions in mm 5423 x 2400 x 810
Internal dimensions in mm 4000 x 1900
Permissible gross weight in kg 2000
Load capacity in kg 1450
Load height in mm 435
Tyre size in inches 13
Drive-up angle 13°
Model Imola 2500
Body dimensions in mm 5423 x 2400 x 810
Internal dimensions in mm 4000 x 1900
Permissible gross weight in kg 2500
Load capacity in kg 1950
Load height in mm 445
Tyre size in inches 14
Drive-up angle 13°
1
2 3
4
Lighting with impact protection
29
*Accessories (optional):
• Spare wheel • Wheel shock absorber without
100 km/h confirmation • Wheel shock absorber incl.
100 km/h confirmation• Wheel chock (locking bar)• 7- to 13-pin adapter • PKW lashing strap, 50 mm strap
width, 2500 mm• Cable winch frame and tackle
with winch and rope• Cargo bed screen print
1.9 x 0.85 mm
Imola flatbed trailer
... lighting with impact protection*
30
31
Universally useful – in the true sense of
the word
Universal wheels-in trailer
1 Bolted V drawbar hot-dip galvanised2 13-pin plug 3 Floor plate 18 mm thick4 2 hot-dip galvanised drive-up ramps made of grating inserted under the cargo bed5 2 supports (Universal 3500)6 7 lashing rings per side integrated into outer frame profile7 Perforation for wheel chocks in outer frame profile8 Cable winch with cable and three-way adjustable bracket9 Automatic jockey wheel (Universal 3000)10 Jockey wheel, large (Universal 3500)11 Humbaur multifunctional lighting with reversing light
1 2
11
3
6
4
5
7
8
9 10
...optionally available with aluminium cargo bed*
Model Universal 3000 Universal 3000
Body dimensions in mm 5374 x 2034 x 830 5374 x 2034 x 830
Internal dimensions in mm 4000 x 2030 4000 x 2030
Permissible gross weight in kg 3000 3000
Load capacity in kg 2310 2320
Load height in mm 600 600
Tyre size in inches 10 10
Drive-up angle 13° 13°
Model Universal 3500 Universal 3500
Body dimensions in mm 5405 x 2050 x 890 5405 x 2050 x 890
Internal dimensions in mm 4000 x 2030 4000 x 2030
Permissible gross weight in kg 3500 3500
Load capacity in kg 2714 2743
Load height in mm 670 670
Tyre size in inches 13 13
Drive-up angle 15° 15°
32
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
4000 seriesWooden floor Aluminium floor
1 Stable base frame made of canted steel profiles2 Optional adjustable wheel chock
3 Loading ramps made of sheet steel4 Cable winch with rope and three-way adjustable
bracket
1
3
4
2
33
Universal wheels-in trailer
*Accessories (optional):
• Spare wheel • Spare wheel holder• Spare wheel holder under the
cargo bed• Wheel shock absorber without
100 km/h confirmation• Wheel shock absorber incl.
100 km/h confirmation• Universal wheel chock • H frame 800 mm high • Drop side extension 350 mm • Drop sides 350 mm • PKW lashing strap, 50 mm strap
width / 2500 mm• Cover and frame, LH 1800 mm /
2000 mm; selection of colours• Supports• Toolbox
...drop sides optionally available*...optional cover extension possible*
34
35
Transports small and larger vehicles
anywhere
Hockenheim tilting flatbed trailer
1 V drawbar and side beam combined, hot-dip galvanised2 Chassis and frame are hot-dip galvanised3 13-pin plug4 Lashing options at the side perforations and stand rails5 Double-acting cylinder with manual pump to tilt the cargo bed6 Cable winch frame and tackle with winch and rope7 Jockey wheel8 Humbaur multifunctional lighting with reversing light
1
2
3
4
5
6
7
8
4
Model Hockenheim 204119 Hockenheim 254119
Body dimensions in mm 5907 x 2440 x 780 5907 x 2440 x 780
Internal dimensions in mm 4150 x 1940 4150 x 1940
Permissible gross weight in kg 2000 2500
Load capacity in kg 1360 1860
Load height in mm 480 480
Tyre size in inches 14 14
Drive-up angle 12° 12°
Model Hockenheim 304119
Body dimensions in mm 5907 x 2440 x 800
Internal dimensions in mm 4150 x 1940
Permissible gross weight in kg 3000
Load capacity in kg 2310
Load height in mm 495
Tyre size in inches 14
Drive-up angle 12°
36
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
4000 series
1 Adjustable locks for mechanical securing of the bridge2 Optional wheel chocks for additional securing of the load3 Optimal corrosion protection ensured by hot-dip galvanised frame
and chassis4 Cable winch frame and tackle with winch and rope provided as
standard5 Secure positioning due to perforated plate stand rails
1
4 5
2
3
37
*Accessories (optional):
• Spare wheel • Wheel chock (locking bar) • Wheel shock absorber without
100 km/h confirmation• Wheel shock absorber incl.
100 km/h confirmation• 7- to 13-pin adapter • PKW lashing strap, 50 mm strap
width, 2500 mm• AKS safety coupling 3000 kg• Continuous screen print
cargo bed
Optional lashing straps
for additional security*
Hockenheim tilting flatbed trailer
38
39
Almost drives by itself –
optimal trajectory
Special stability by crosswise
profiles in the platform
Vehicle transporter MTK
1 Screwed, hot-dip galvanised chassis2 Welded, hot-dip galvanised tilting platform3 Tilting platform mechanically tiltable by gas pressure springs4 Steel ramps under the platform, extendable5 Cable winch adjustable in longitudinal direction6 Perforated stand rails for a safe transport 7 6 pairs of lashing points (for length 3600 mm and 4200 mm) in external frame, 400 kg
traction force each8 8 pairs of lashing points (for length 4200 mm) in external frame, 400 kg traction force
each9 Tilting platform locked mechanically in tilted condition
Also available
as single axle
version!
1
23
7
5
8
6
9
410
Model MTK 254222 MTK 304222 MTK 354222
Body dimensions in mm 5700 x 2180 x 900 5700 x 2180 x 900 5700 x 2180 x 900
Internal dimensions in mm 4200 x 2180 4200 x 2180 4200 x 2180
Permissible gross weight in kg 2500 3000 3500
Load capacity in kg 1780 2280 2720
Load height in mm 650 650 650
Tyre size in inches 13 13 13
Drive-up angle 10° 10° 10°
Model MTK 304722 MTK 354722
Body dimensions in mm 6200 x 2180 x 900 6200 x 2180 x 900
Internal dimensions in mm 4700 x 2180 4700 x 2180
Permissible gross weight in kg 3000 3500
Load capacity in kg 2240 2680
Load height in mm 650 650
Tyre size in inches 13 13
Drive-up angle 9° 9°
40
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
4000 series
1 Smooth-running cable winch with pulley2 Platform with special tilting bearing3 Aluminium treat plate ramps sliding into ramp slot4 High stability due to dual hat profiles attached cross-wise to the bridge5 Extreme stability due to a bolted, riveted and screw-fastened bridge
with continuous side beams
3 4
2
1
41
Accessories (optional):• Cover and frame, loading
height 1800• Cover and frame, loading
height 2000• Shock absorbers with 100
km/h declaration• Shock absorbers without
100 km/h declaration• Aluminium drop-sides
350 mm• Wooden floor over com-
plete platform, without stand rails
• Aluminium floor over com-plete platform, without stand rails
• Wooden floor between the stand rails
• Double acting cylinder for tilting the platform
• Cable winch, adjustable crosswise in 5 positions
• Electric cable winch, ad-justable
Vehicle transporter MTK
42
43
Can also deal with
the very heavy stuff ���
Perforated ramp gate
folding up with support
of gas springs
Universal transporter MTK Allcomfort Tandem
1 Screwed, hot-dip galvanised chassis2 Welded, hot-dip galvanised tilting platform3 Tilting platform mechanically tiltable by gas pressure springs4 Ramp gate with a special perforation and gas springs5 Drop-sides made by anodised aluminium6 Lashing ponts in external frame, traction force 400 kg each7 Optional cable winch, adjustable crosswise in 5 positions 8 Wooden floor 18 mm, weather-resistant
Also available
as single axle
version!
2
3
5
67
1
4
33
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
44
4000 series
1 Multifunctional applications2 Exceptional stability due to dual hat profiles attached cross-wise
to the bridge3 Hot-dip galvanised stanchions and front tension locks4 Optionally with cable winch, rope and pulley, 5-step adjustable5 Platform with special tilt bearings, directly mounted on the two axle
bodies
Model MTKA 254222 MTKA 3042222 MTKA 354222
Body dimensions in mm 5750 x 2305 x 1690 5750 x 2305 x 1690 5750 x 2305 x 1690
Internal dimensions in mm 4200 x 2180 x 200 4200 x 2180 x 200 4200 x 2180 x 200
Permissible gross weight in kg 2500 3000 3500
Load capacity in kg 1630 2130 2580
Load height in mm 650 650 650
Tyre size in inches 13 13 13
Drive-up angle 10° 10° 10°
Model MTKA 304722 MTKA 354722
Body dimensions in mm 6250 x 2305 x 1390 6250 x 2305 x 1690
Internal dimensions in mm 4700 x 2180 x 200 4700 x 2180 x 200
Permissible gross weight in kg 3000 3500
Load capacity in kg 2080 2535
Load height in mm 650 650
Tyre size in inches 13 13
Drive-up angle 9° 9°
1
2
3
45
*Accessories (optional):• Wheel stop MTK• Shock absorbers without
100 km/h declaration• 2 pcs rest panels for ramp
gate, loose• Aluminium drop-sides 350
mm• Cable winch, adjustable in
5 positions• Electric cable winch, ad-
justable• Aluminium floor instead of
wooden floor• Shock absorbers with 100
km/h declaration
Universal transporter MTK Allcomfort Tandem
...electric cable winch*
46
47
Always supports
you for loading
1 Welded drop-side-/ frame construction made by steel sheet, hot-dip galvani-
sed2 Screwed V-drawbar, hot-dip galvanised3 13-pole plug and reversing light4 Hot-dip galvanised ramp gate with anti-slip grid covering as well as gas
spring support (approx� 1240 mm height, tested for an axle load of 2500 kg)5 Lashing points mounted in external frame, 10 pcs (5 pairs) at 3000 mm and 12
pcs (6 pairs) at 3750/3990 mm internal length, traction force 1000 kg per lashing
ring6 Full automatic jockey wheel 7 Steel mudguards, opening and closing automatically during lowering process8 Lighting, mounted lateral 9 Tilting hydraulic with manual pump
Senko elevating trailer
1
2
3
7
5
4
6
89
3
48
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
Serie 4000
1 Drawbar box as protection for battery and tilting hydraulic 2 Hot-dip galvanised ramp gate with anti-slip grid covering and gas spring
support
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
Model Senko 253016 Senko 303016 Senko 353016 Senko 253718
Body dimensions in mm 4750 x 2230 x 1740 4750 x 2230 x 1740 4680 x 2230 x 1740 5500 x 2480 x 1740
Internal dimensions in mm 3000 x 1600 x 270 3000 x 1600 x 270 3000 x 1600 x 270 3750 x 1850 x 270
Permissible gross weight in kg 2500 3000 3500 2500
Load capacity in kg 1775 2260 2740 1655
Load height in mm 470 470 470 470
Tyre size in inches 13 13 13 13
Drive-up angle 7° 7° 7° 7°
Model Senko 303718 Senko 353718 Senko 304019 Senko 354019
Body dimensions in mm 5500 x 2480 x 1740 5470 x 2480 x 1740 5740 x 2550 x 1740 5710 x 2550 x 1740
Internal dimensions in mm 3750 x 1850 x 270 3750 x 1850 x 270 3990 x 1920 x 270 3990 x 1920 x 270
Permissible gross weight in kg 3000 3500 3000 3500
Load capacity in kg 2140 2620 2115 2595
Load height in mm 470 470 470 470
Tyre size in inches 13 13 13 13
Drive-up angle 7° 7° 7° 7°
1
1
2
49
Accessories (optional):• Spare wheels• Spare wheel holder• Lochrehling seitlich• Frame for cable winch• Cable winch with cable
and deflection pulley for electric pump
• Alu-Swiss ramp gate instead of steel ramp gate
• Drawbar box, hot-dip galvanised
• Ladder rack• Pump combined with
emergency manual pump for V-drawbar
• Cover and frame (1800 mm/2000 mm), colour at buyer´s option
• Floor covered with alumi-nium treadplate
Senko elevating trailer
50
51
Versatile transport solutions with a modern,
trendy look
Rexus all-poly box trailer
1 Champ side beam chassis, hot-dip galvanised
with wheel shock absorber / 100 km/h
confirmation2 13-pin plug 3 Floor plate 21 mm thick4 6x lashing rings mounted on cargo bed to
secure the load5 Ramp wall (optionally with aluminium treat
plate, rear gas spring support, lockable,
payload 1300 kg, tested by Dekra�6 Doors at right front, lockable, with three-point
lock7 Aluminium wheel rims8 Jockey wheel9 3. Brake light
12
3
5
2
4
6
7
8
9
9
Model REXUS
Body dimensions in mm 4596 x 2080 x 2345
Internal dimensions in mm 3250 x 1500 x 1800
Permissible gross weight in kg 2000
Load capacity in kg 1285
Load height in mm 460
Tyre size in inches 15
Drive-up angle 15°
Black Metallic
Yellow MetallicOrange Metallic
White
Red Metallic
Silver Metallic Blue Metallic
Please note that the colours
illustrated may differ from the
original colours.
52
Subject to change without notice. All dimensions are approximate values and refer to the vehicle without accessories.
4000 series
Colours
1 Motorcycle stand for a perfectly
secured load2 Ground stands (optional), designer
rear lights and chrome brackets3 Champ chassis for optimal longitu-
dinal stability
1
3
2
53
Accessories (optional):
• Spare wheel • Motorcycle stand • Locking bar for slotted tie rail,
internal width from 1450 to 1550 mm
• Locking bar for barred tie rail, internal width from 1450 to 1550 mm
• Fittings for load safety rail• Motorcycle strap 25 mm• Metal locking shoe with lock for
drive-on device up to 3.0 t• AKS safety coupling 2000 kg• Lifting supports • Floating screed floor • Spare wheel holder • Double wing doors instead of
ramp wall • Barred tie rails• Slotted anchor rail • Load safety rail, right and left,
2.2 m long • Safety Compact anti-theft device• Aluminium treat plate • 4 or 6 lashing rings, recessed
and mounted on wooden floor, tensile force 0.2 t each or 0.4 t each
• 4 folding rings • Shackle lock for braked trailers
up to 3000 kg
Rexus all-poly box trailer
Body Lighting / electronics
Tyre size
54
Optional accessories – as desired
Double-acting cylinder
Standing rail with bracket (supplied loose)
Outrigger struts for tailgate, loose (2x) Floor plate covered with aluminium treat plate
Cable winch with rope and diverting roller or block and tackle
Floor screed
7- to 13-pin adapter / 13- to 7-pin adapter
Reversing light (only possible with 13-pin plug)
Spare wheel
Double wing doors instead of ramp wall
Cargo bed closed off with full-length screen print plate
Additional access ramp, loose (1x)
Anti-theft deviceChassis
55
AKS safety coupling
Prop stands (2 x)Wheel shock absorbers (loose)
Lifting support with crank
Jockey wheel Metal locking shoe with lock
Shackle lock for all braked trailers up to 3500 kg
Safety Compact anti-theft device
Plug lock for unbraked trailers
Load securing
56
Lashing rings, recessed, mounted in wooden floor, tensile force 0.2 t each (4x) or pull force 0.4 t each (4x or 6x)
Fittings for load securing rail (4 x) Folding rings (4 x) Load securing rail
Motorcycle strap 25 mm (4 x) Motorcycle stand Wheel straps 50 mm wide
Optional accessories – as desired
Slotted tie rail with locking bar Barred tie rail with locking bar
Wheel chocks (locking bar)
Tarpaulins
Tarpaulins in standard colours
Please note that the colours illustrated may dif-fer from the original colours.
57
Cover and frame, loading height 1600 mm / 1800 mm / 2000 mm
We will gladly provide
individual tarpaulin
lettering on request!
White / similar to RAL 9010
Red / similar to RAL 3002
Grey / similar to RAL 7038
Medium yellow / similar to RAL 1003
Blue / similar to RAL 5002
Orange / similar to RAL 2011
Green / similar to RAL 6026
58
59
Here at Humbaur
…has been our motto since the company was established in 1957.
With around 420 serial production models for the private and
commercial sectors, Humbaur is one of Europe's leading trailer
manufacturers.
Innovative and experienced, with a presence throughout Europe
and beyond. As an owner-managed, medium-sized family business,
we know what our customers need and how they work.
This is why we develop our products meticulously, manufacturing
them with the greatest care and then putting them through their
paces. Innovative ideas, cutting-edge manufacturing, a clear
focus on quality and competent, comprehensive support are our
strengths. Strengths that we provide to serve our customers.
Ulrich Humbaur
Proprietor, Director / CEO.
»Quality made in Germany…«
Competence in trailers
Humbaur GmbH • Mercedesring 1 • 86368 Gersthofen • Tel. +49 821 24929-0 • [email protected] • www.humbaur.com
Have a look at our product range�
We offer a large variety of trailer models� Throw a glance at our brochures
to see our single-/double-axle trailers, vehicle, animal and universal
transporters and heavy-duty and commercial trailers.
We will gladly customise a trailer to meet your needs� Speak to us!
Safe
ty n
ote!
The
traile
r may
onl
y be
use
d w
ith e
xpre
ss a
dher
ence
to a
ll ro
ad tr
affic
, pro
fess
iona
l ass
ocia
tion
and
load
secu
ring
regu
latio
ns. W
e as
sum
e no
re
spon
sibili
ty fo
r prin
ting
or o
ther
erro
rs o
r om
issio
ns. S
ubje
ct to
cha
nge
with
out n
otice
. All
dim
ensio
ns a
re a
ppro
ximat
e va
lues
. Prin
ted
in G
erm
any.
Repr
int p
rohi
bite
d · I
llust
ratio
ns si
mila
r; so
me
traile
rs a
nd d
etai
led
imag
es sh
ow sp
ecia
l equ
ipm
ent ·
Ord
er n
o. 0
09.0
0076
- Da
te: 0
9/17
.