MOTOR VEHICLE MANUFACTURERS SPECIFICATIONS METRIC (U. S. Customary) 1996 Manufacturer Vehicle Line FORD MOTOR COMPANY FORD MUSTANG Mailing Addres s RESEARCH AND ENGINEERING CENTER MD 3021 P .0. BOX 2053 Issued Revised DEARBORN, MICHIGAN 48121-2053 AUGUST 25, 1995 NOVEMBER 1, 1995 Direct questions concerning these specifications to the manufacturer listed above. The information contained herein is prepared , distributed by, and is solely the responsibility of the vehicle manufacturing company to whose products it relates. This suggested specification form was developed by the vehicle manufacturing companies under the auspices of the Ameri can Automobile Manufacturers Association . The General Specifications herein are those in effect at date of compilation and are subject to change without notice or incurring obligation by the manufacturer. American Automobile Manufacturers Association Forms Provided by Engineering Affair s Division
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MOTOR VEHICLE MANUFACTURERS SPECIFICATIONS
METRIC (U. S. Customary)
1996
Manufacturer Vehicle Line
FORD MOTOR COMPANY FORD MUSTANG
Mailing Addres s RESEARCH AND ENGINEERING CENTER MD 3021 P .0. BOX 2053 Issued Revised DEARBORN, MICHIGAN 48121-2053 AUGUST 25, 1995 NOVEMBER 1, 1995
Direct questions concerning these specifications to the manufacturer listed above.
The information contained herein is prepared , distributed by, and is solely the responsibility of the vehicle manufacturing company to whose products it relates. This suggested specification form was developed by the vehicle manufacturing companies under the auspices of the Ameri can Automobile Manufacturers Association .
The General Specifications herein are those in effect at date of compilation and are subject to change without notice or incurring obligation by the manufacturer.
American Automobile Manufacturers Association Forms Provided by Engineering Affair s Division
MVMA Spec ifications METRIC (U. S. Cust om ary)
Table of Conte nts
1 Vehicle Models/Origin
2 Power Teams
3 Engine
4 Lubrication System
4 Diesel System
5 Cooling System
6 Fuel System
7 Vehicle Emission Con trol
7 Exhaust System
8-10 Transmis sion, Axles and Shafts
11 Suspension
12-13 Brakes, Tires and Wheels
14 Steering
15-16 Electrical
17 Body - Miscellaneous Information
17 Frame
18 Glass
18 Headlamps
19 Climate Contro l System
0 20-21 Convenience Equipment
21 Trailer Towing
22-24 Vehicle Dimensions
25 Vehicle Fiducial Marks
26 Vehicle Mass
27 Optional Equipment Differential Mass (We ight)
28-34 Vehic le Dimensions Definitions - Key Sheets
35 Index
NOTE:
0 Indicates Format Change
From Previous Year
1. This lonn uses both SI Metric units and U.S. Cusmma/y OOltS The metric UNI of measure IS ~ first. aod lhe U s . eustoma,y unit follows in parentheses. 2. UNLESS OTHERWISE INDICATED :
a. Specrficabons apply to standatd models withOUt opbonal equipment Slgnlf1C8111 devla1Jons an! noted b. Nominal design dimensions are used ttuooghout these speabcations. c. All lalear dmensions are in mi&meters [inches ), and al mass (weigh() speciflc:-a1x;,is are in kilograms (pounds) .
3 . The General Speaficabons hennn are lho5e in effect at date of c;ompilalicn and are subject 10 change without nolice or lllCUmng obltgabon by the manufacturer . 4. Adcilional Vehde Omenslons (based in part on SAE J1100 "Motor Vehicle Dmenaons1 may be available from the manufactlJrer .
MVMA Specific a tion s
M ETRIC (U. S. Cust omary)
Vehicle Line __,_,M.:.aU:;.:S~T"-AN=G=------------------ - --ModeJ Year 1996 Issued 8125/95
Vehicle Orig in Design & developmen t (company) For d Motor Company
Where buih (country) U.SA
Au1honzed U.S. sales marlutling representative Ford Divislon, Ford Motor Company
Vehic le Models
Model Make, Vehicle Model s. No. of Designated Descripbon & Drive lnltodUCIIOll Series, Body Type $eating POSIIIOOS
(FWO/RWO/ AW0/ 4WO)° Oat.e (Mfgi's Model Code) (Fronr/Rear)
REAR WHEEL DRIVE (RWD) MUSTANG MODEL 9128195 2-Door Coupe 63 (BJ) 212. 2-Door Convertible 76 (BH) 212.
MUSTANG GT MODEL 9128195
2-Door Coupe 63 (BJ) 212. 2-0oo r Convertible 76 (BH) 212.
MUSTANG COBRA MODEL 9128195
2•0oor Coupe 63 (BJ) 212.
• FWD • Front Wheel Dnve RWD • Rear Wheel Drive AWO • All Wheel Drive 4WO • Four Wheel Onve
Page 1
Revised( •) ______ _
Max. Trunk/Cargo EPAFuel Load-Kilograms Economy
(Pounds) (Cny/ Hwy)
45.4 (100 ) 20/30
45.4 (100 ) 20/30
45.4 (100) 18/27 45.4 (100 ) 18/27
45.4 (100) 18 /26
MVMA Specifications
METRIC (U.S. Custom ary)
Power Tea ms
Vehicle Line .-.:..:M:..:U:c::S:..cT.:..;A::.:N""G'---------------- -- --Model Year 1996 Issued 8125/95 Revised (•) _______ _
SAE J1349 Net bhp (brake horsepower) and Net Torque corrected to n °F/25°C and 29.61 in. Hg/100 kPa atmospheric pressure .
A B
EngineCode 994 994
01splaoement l.Jters (1n3) 3,8 (232) 3.8 (232)
E Induction System Sequential Electronic Port Sequenllal Electronic Port N (Fl, cam, etc.) Fuel Injection
G I CompreSSIOO 9.0:1
N Ratio
E SAE Power 112 (150)@ 4000 Net kW(bhp) at RPM Torque
N■m ( lb. ft.) 292 (215) @ 2750
Eichaust Single single, dual
T Transmiss<On/ 5-Speed Man. TSOD R Transaxle Transmission
A N Effective Final Onve/ 2.73 s Axle Ratlo {std. first)
• Rear ol engine - dnve takeoff View frcm dnve takeoff end to deteffl'llne left & nght side ol engine.
•• Finished state
••· Dressed eng,ne mass (weight) includes the follOW1ng Front End Ores:;;, All Engine Mounted Components and Aex Plate ; Excludes Starter and Alternator
Engine - Connecting Rods Material & mass kg., (weight, lbs .)°
length (axes C/L to C/l)
Engine - Cranksh aft
Model Year 1996 Issued
, 3.8 L
Standard with Roller Tappets
6 / 6
45 (1.77) / 37 (1.46)
Powered Metal, 0.629 - 0.639 (1.39 - 1.41)
150 .2 (5.9)
Matenal & mass kg., (we ight. lbs.r Nodular Cast Iron and 14.06 (31)
End thrust taken by beanng (no .) #3
Length & number of main bearings 4
_ 8/2=5/=9:e.:Sc.___ Revised(•) _ __ _ ___ _
Sea l (matenal, one , two I Front Aouroc arbon, One Piece piece desi9n, ete) li--R-ear--- - ------, 1--F-lo-u-ro_c_a-rbo- n--',-D- u_a_l _L_ip ________________________ __ _
Engine - Lubrication System Normal oil pressure kPa (psi} at eng,na rpm 276-414 (40- 60) @ 2000 RPM
Type oil intake (floating , stabonary) Stat ionary Shrouded Screen in Sump
Oil filter system (full flow, part. o1her) Full Flow
Cepacity of c/case , less filter- refill•L (qt.) 4.3 (4.5) Plus 0.47 (0.5) for Filter
Engi ne - Diese l Info rm ation (NOT OFFERED)
Diesel engine manufaC'IUrer
Glow plug, current drain at 0°F
l,;ector ! Type nozzfe I Opening pre$$ure kPa (psi)
Pre-chamber des ign
Fuelln,ection I Manufa cture r pump ! Type
Fuel injecilon pump drive (belt , chain, gear)
Supplementary vacuum source (type)
Fuel heater (yes/no)
Water separator, description (std ., opt.)
Turbo manufacturer
Oil cooler •type (oil to engine ooolant; ell to ambient air)
Oil filter
Engine - Inta ke System (NOT OFFERED)
Turbo charger· manufacture r
Super charger• manufacturer
lntercooler
• Finished state.
Page4
MVMA Specif ic a tions
METRIC (U.S . Cu stom a ry)
Vehlcte Line ---.:.::M.:.:::U:..::Sc...:T~AN"-=G'----- -------- - ----- --
Engln• 0. .cirlpUon Engin•Code
Engine - Valve System Hydraulic filters (std., opl, n.a.)
I Number 111take/exhaust
I Head 0 .0 . mtake/exhaust
Engine - Connecting Rods Malena! & mass kg., (weight, lbs.)'
Length (axes C/L to CII..)
Engine - Crankshaft
Model Year 1996 Issue d 8125/95
I 4.6L (SOHC) w/GT
Hydraulic Lash Adjus ter (with Roller Follower)
8/8
44 .5 (1.75) / 34 (1.34)
Powere d M eta l Forging, 0.58 (1.28)
150 .7 (5.93)
Material & mass kg .. (weight. lbs.)' Nodula r Cast Iron 19.6 (43.3) End thrust laken by beanng (no.) #5
Length & number of mam beanngs 19 (0.75), 5
Re~se d(1 ____ _ __ _
4 .6L (DOHC) w/COBRA
16/ 16
37 (1.46) / 30 (1.18 )
ForQed Steel 23.0 (50 .0l
Seal (matenal, one, two I Front Flouroelastomer, One Piece Si licon, One Piece piece design, etc.) lf-R_e_a_r----- ---+-- Fl-o-ur_o_e_la-st_o_m_e-'r.-T-w_o_P_i-ec_e ____ _ ___ _ _ S_il i_c_on-'.-T-w-0_P_i_e_ce-w-ith_ O_d_S_li_n_ge_r __ _
Engine - Lubrication System Nonna! oil pressure kPa (psi) at engme rpm 276- 414 (40-60) @ 2000 RPM 2 10 - 350 (30 - 50) @ 2000 RP M
Type od intake (floaong, stationary) Stationary Sh rouded Screen in Sump
011 filter system (full flow. part, other) Full Flow
Capae1ty of c/r=re, less filter-refill-L (qt ) 5. 7 ( 6,0) Less 0.4 7 (0. 5) for Filter
Engine - Diesel Information (NOT OFFERED)
Diesel engine manufacturer
Glow plug, current drain at 0°F
lrjector ! Type nozzle I Opening pressure kPa (psa)
PnKhamber design
Fuelinjeclion I Manufacturer pomp !Type
Fuel injection pump dnve (belt, cham, gear)
Supplementaiy vacuum source (type)
Fuel heater (yes/no)
Water separator, descnp11on (std~ opt)
Turbo manufacturer
Oat oooter-type ( od to engine coolant; od to ambient air)
Oal filter
Engine - Intake System Turbo charger• manufacturer
Super charger - rnanu1acturer
lnten:ooler
I (NOT OFFERED)
• Finished S1ate.
Page 4A
MVMA Specifications
METRIC (U.S . Customary)
Engine O.ecriptlon Eng-.Cocl.
Engine - Cooling System Coolant recovery system (std., opt, n.a )
Coolant 6D location (rad .. , bottle)
Racbatof cap relief valve press1.1re kPa (psi)
CircUalion Type (c:hoke, bypa.s$) lhermoslat Star1S to open at •c (Of)
Type (centrifugal, other)
GPM 1000 pump rpm
Number of pumps Wa~ Drive (V-belt, other) pump
Bearing type
Impeller matenal
Housing material
By-pass recirculation type (mter., ext )
Cooling With heater - l(qt)
sys1em With air condiboner - l.(qt.) capacity
Opt. equipment specify- L(qt.)
Water jackets full length of cyf. (yes, no)
Water all around cylinder (yes, no)
Water jackets open at head face (yes, no)
Std.,A/C, HO
Type (=•fl ow, etc.)
Construcbon (fin & tube mechanical, braze, etc.)
Radiator Material, mass kg (wgt , lbs.) core Width
Height
Thickness
F'lllS per inch
Radiator end tank material
Std .• alee., opt
Number of blades & type (flex , solid, material)
Number & locabon (lronl, rear of radiator)
Diameter & projected Width
Fan RatJo (fan to crankshaft rev.)
Fan cutout type
Dnve type (direct. remote)
RPM at idle (alee.)
Motor rating (wattagelelec.)
MotOf' switch (type & locabon/elec.)
Swlleh point (temp./pressure/elec.)
Fan shroud (matenal)
Vehicle Line ......:.M:.;.U=ST-'-'AN'-"--'-G.;... ___________________ _
Model Year 1996 Issued __,,,8/2=5/9-"'5,e___ Revised(•) _______ _
13.BL
(Se e Page SA for 4.6L (SOHC) and 5B for (DOHC)
Standard
Radiator Coolant Fill ; Bottle Coolant Add
97 - 127 (14 - 18) , Mean 110 (16)
Reverse Poppet
91.7° (197 °)
Centrifugal
10
One
Six Rib Poly V
Double Row, Sealed, Ball and Roller
Low Carbon Steel
D,e Cast Aluminum
EJ<ternal
11.9 (12.6)
11.9 (12.6)
NIA No
Yes
No
Standard
Cross-Flow
Tube and Slit Fin , Vacuum Braz ed Aluminum with Nylon End Tanks
No. of I PllllOO 15 15 13 11 1--------------+---------------------------------te e lh I Ring gear 41 41 40 36
Rear Axle Unit (Regular Axle) (Traction -Lok Axle)
DescripllOn Semi-Floating Type with Cast Center and Underhung Pinion
Limited slip differential (type) NIA Frictio n Plate
Dnve Pinion IType Hypoid
I Offset 25.4 (1.0) 38.1 (1.5)
No. of dtffenmtial pinions Two
Pinion/ cfifferential I Acfiustment (shim, etc.) Shim
I Bearing adjustment Collapsib le Spacer, Shim
Dnvmg wheel beamig (type) Stra ight Roller
Lubricant I Capacity L (pl) 1.5 (3.3) 1.8 (3.75)
I Type recommended WSP -M2C 197-A, SAE 80 W 90, GL-5 WSP-M2C 197-A, SAE 80 W 90, GL-5 (a)
(a) Add 2 o.z. M2C 196-A Friction Modifier
Propeller Shaft - Rear Wheel Drive
Manufacturer Type (straight tube, tube-in-tube, Ford Straight Tube with Internal TUJ'led Damper 1ntemal-extemal damper, etc )
Manual 4·speed transmission NIA
Manual 5-speed transmission 88.9 X 1163 X 1.65 {3.50 X 45.6 X .065) 88.9 X 1153 X 1.65 (3.50 X 45 .4 X ,065) Outer d1am.x lenr · x wal
Manual 6-speed transmission NIA
thickness
Overdrive N / A
Automatic Transmission 88.9 X 1163 X 1.65 (3.50 X 45 .6 X .065) 88.9 X 1153 X 1.65 (3.50 X 45 .4 X .065) 4-speed,AODE
Intermediate Type (plain. snit-friction) NIA bearing l.ubricabon (frttmg, prepack) N IA
Type Damper Plain wl MT; Damper w/ AT
~ Number of teeth 28 31
Splineo.d. 38.05 (1.498)
Make and mfg. no I Front Ford 1330
I Rear Ford 1330
Numbe-rused Two
Type (ball and trunnion, cross) Cross Un111ersa1 pints Rear attach ( u-bolt, clamp, etc.) Circular Flange
Bearing
Type (plain, anti-friction) Needle Roller
lubrication Pre-pack (filling. prepack)
Drive talc.en through (torque tube, aims or sprmgs) Control Arms
Torque taken through (torque tube . Control Arms anns or springs)
• Centerline to centerllne of universal Joints. or to center11me of rear attachment
Page 10 lRear Wheel Drive)
MVMA Specif ications
METRIC (U.S. Cu sto ma ry)
Mode l Cocle/Deeoripllon And/Or l!ns"- Cocle/De -riplio n
Vehicle Line ~ M .... U~S-T~AN ...... G ____________________ _
Model Year 1996 Issued -=8/2=5195=~- Revised (•) __ __ ___ _
I MUSTA NG MODELS EXCEPT GT AND COBRA
Suspension - General Including Electronic Controls (SE E PAGE 11A FOR GT AND 11 B FOR COBRA)
Standard/optional/not avail. N /A
ManuaVautomatio control -Type (air/hydraulic) -
Car Primary/assist spnng -leveling Rear only/4 wheel leveling -Single/dual rate spring -Single/dual nde heights -Provision for jacking -Standard/option/not avaJI. N /A
Manual/automatic control -Number of damping rates -
Shock Type of actuation {manual/ absolber dampmg eleciric molor/air, ell: .) -controls s Lateral accele ratioo -e
n Deceleration -s 0 Aoceleration -r s Road surface -
Shock Type Strut - Front I Shock- Rear , Nitr ogen Gas-Pressunzed Hydraulic
Low Metallic, Non Asbestos Semi-Metallic, Non Asbestos
112 X 51 X 10.65 (4.4 X 2.0 X 0 .4) 137 X 40 X 9.5 (5.4 X 1.6 X 0.4)
112 X 51 X 10.65 (4 ,4 X 2.0 X 0 .4) 137 X 40 X 9,5 (5.4 X 1,6 X 0.4)
6.35 (0.25) 5.5 (0.22)
Bonded Akebono
AK-NS516 H
Low MelaUic, Non Asbestos
72.4 X 38 X 12 (2.8 X 1.5 X 0.47) 72.4 X 38 X 10 (2.8 X 1.5 X 0.40)
72.4 X 38 X 12 (2.8 X 1.5 X 0.47) 72.4 X 38 X 10 (2.8 X 1.5 X 0.40)
5.0 (.20)
• Exdudes rivet holes, grooves, chamfers, etc. ••1nc1oc1es rivet holes, gl'OOIIU, chamlers, etc. ••• Total swept area for four brakes. (Orm, btake : Wldas1 hning conlact Width for each brake x its contact a~mference.)
(Disc bral<e: Square of Outer Working Ola. minus Square of Inner Worklng Ola. multiplied by P1l2 for each brake.) .. .. Size for d!\JITI brakes includes length x width x lhickne$s. ••• .. Manufacturer 1,0 ., catalog for formulation des19naUon and coeff,c:,ent of friction classification . (a) 27 (1.06) 133.1 (1.30) w/GT
NIA Two-Speed Electric Column-Mounted Control, Interval Wipe, Standard
N/A 500 (20)
6381 (989)
Electric Pump (Impelle r Type, Dual Fluid1c Spray), Standard
NIA NIA NIA Air Electnc
Two Standard- One H i-Pi tch , One Lo-Pitch
See Page 15A
(c) Alert l.ight1; Located in Instrument Cluster for Low Fuel, and Low Washer Fluid (Check 011 and Low Coolant w/GT and Cobra) (d) 241 KPH 1150 MPH with GT Model
Page 15
MVMA Specifications
METRIC (U.S. Custom a ry}
SUPPLEMENTAL PAGE
Vehicle Line ~ M~U~S~T~AN~G~----- ----- - ------ --Model Year 1996 Issued 8125195 Revised( •) _______ _
Electncal lnsln.lmen1s and Equipment (Cont'd)
• Brake System Warning Light
• Emergency Flashers
• Directional Tum Signal Lights
• HI-Beam Indicator Light
• Fasten Seat Belts Warning Light
• Headlamps "ON" Reminde r Chime, Safety Belt Warning Chime, Ignition Key Reminder Chime
• Check Engine Warning Light (Emissions Warning)
• Chedc Oil - Low Engine Oil Warnin ,g Ligh t (For 4.6L Engine Only; Located ,n Instrument Cluster)
• Low Coolant Alert Light (For 4.6L Engine Only; Located in Instrument Cluster)
Mode l Year 1996 l$$.U8d 8/25195 Revised( •) _____ __ _
I MUSTANG MODELS/3.SL
(See Page 16A for 4.6L (SOHC) and 168 for 4 .6L (0OHC} Johnson Con trols Inc. or GNB
Standard
12
540
100
58
Left- Hand Front of Engine Compartment
Ford (EFHD Rawsonville)
130 Amp ./ Max . (F4SU-10300-AB)
2.80:1
N / A
Electronic - lnteoral with Alternator
Ford (EFHD Yps ilanti) - Permanent Magnet Type 300 - 400 Amps .
1 .4 (1.9)
Positive (E9SF •BA)
Front
Standard
EDIS
Motorcraft
F1SU-12029-AA
0 Amps Nom inal
6.0 Amps Nom inal
Motorcraft
AWSF4 4 PP
14
10 - 20 (7.4 - 14.8)
1.32 - 1.42 (.052- .056)
One NIA N / A
Capac.1tor in Alternator , Resisto r Spark Plu gs and Resistance Core Ignitio n Wire. Ground cable - Engine to Dash Ground Cable, Hood Bond, AF Shielding Material.
Page 16
MVMA Specifications
METRIC (U.S. Customary)
Electrical - Supply System Manufaciuter
Model. (std., opt.)
Voltage
Battery Ampi; at o•f cold crank
Mlnutes-reserve eap&elty
Amps/hrs. •20 hr. rate
L.ocabon
Manufacture r
Retu,g (ldle/mex rpm)
Alternator Ratio (alt. crank/rev .)
0u1Plrt at Idle (rpm. perk)
0ptionel (type & ralmg)
Regulator Type
Electrical - Starting Syst em Manufacturer
Motor Current drain -20 ('f')
Power l'atl"lj kw (hp)
Engagement type Motor dri\,e Pinion engages
from (front. reaf1
Electrical - Ignition System
Type Electronic (Sid., opl . IUI.)
Other (specify)
Memfacturer
Model Coll I Eng ine stopped - A Current I Eng.no Idling - A
Fuel door locli: (remote, key, electric) NIA Std. / opt. & location in vehicle N I A
Integrated Number of occupants -Child Occupant weigtlllheight (mm .. & max.) -Seating
Restraint system description (3 or 5-point bettslboos1er soot capabilrty ) -
Auto head on/ off delay, dimming NIA Comering NIA Courtesy (map, reacflng) Standard , Comb ination Dome/Map Light (Integral with lntenor Mirror - Convertible)
Door lock. ignition NIA Engine cornpar1ment Standard
lamp$ Fog Standard on GT Mode l ; Not Available on Other Models
Glove compartment Standard
Trunk Standard
Illuminated entry system Optional (Included and Availab le Only with Remote Keyless Entry Option) (1151 lamps, actJvation)
Olher
Day/ night (au1o., man.) Standard, Manual (Integral with Map Light on Convertible)
Mirrors LH . (remote. power, heated) Standard, Powe r Remote
R.H. (convex. remote. power, heated) Standard , Convex, Power Remote
Visor vanity (RH/ LH, illuminated) Optional, RH.ILH Illuminated , Standard with Convertib le, GT and Cobra
Navigation system (describe) NIA
Parking brake-auto release (warning r,ght) N / A
Page20
MVMA Specifications
METRIC (U .S. Cu stomary)
llodel Code/Deaoripti-
Vehicle l.Jne --=-=M.:..::UST:.=-'-'AN:...c.=G'--------------------Model Year 1996 Issued 8125195 Revised (•) --------
I ALL MODELS
Conve nience Equip ment (standard, optiona l, n.a.) o.cJc lid (release, pull down ) Standard with Convertible, Cobra and GT, Pull Lever- Push Button Release
Door lodes (manual, automatic. Optional Power Door Locks (Part of Power Equipment Group); Standard with doscnbe system) Convertble, Cobra and GT
2 · ◄ · 6 way. ele. Optional, 4-Way Driver's Seat (Not Available with Cobra)
Reclining {R.H., LH .) NI A
Power Seats Memory (R.H • L H., preset rec&ne) NIA equ,pment Support (lumbar, hip, thigh. etc.) Standard, Cobra and GT Only, Power Lumbar, Onver and Passenger
Heated (A.H., LH ., olher) N I A
Sidewtndows Optional (Standard with Convertible, Cobra and GT) , Driver Side Express Down
Vent windows NIA Rear windows
Antenna (location, whip. w/shield. power) Standard, Whip - Right Front Fender
Standard • M ldline AM/FM Stereo 24 Watt Ou1put
- Midine AM/A,1 Stereo W1lh cassette (24 Watts)
AM, FM, stereo, !ape , - MJdline AM.IFM Stereo with casseae and Premium Sound (80 Watts) (a) Radio compact disc, graph,e equalizer,
- Premium AM/FM Stereo With Analog Cas-sette (PAC) With Mach 460 Sound (230 Watts) (b) system& theft deterrent.. radio prep package.
Optional headphone Jaci<s, etc . - Premium AM/FM Stereo With Compact Oi$c Player (COR) Wiltl Premium Sound (80 Watl&) (a)
- Premium AM/FM Stereo With Compact Oise Player (COR) With Mach 460 Sound (230 Watls) {b)
Speaker (number, location) Std. - Four 5 .5" x 7.s•; Located in Each Side Door and Package Tray lor Coupe , (One in Each Inner Otr. Panel for Convertible) ; Opt. Prem. Speakers with Prem. Sound
Root. open air or fixed (flip-up, liflding, 1j NI A Speed con1rol device Optional (Standard with Cobra)
Speed wamlng device (light, buzzer , etc.) N/ A Tachometer (rpm) 7000 Telephone system (descnbe) NIA Theft deterrent system Std. , Passive Anti-Theft (PATS ) w/ GT; Opt, Total Anti-Theft System (TATS) (Std. wl Cobra)
(a) Inc. Premium Qualrty Speakers
(b) Mach 460 Includes: Four 5.5" x 7.5" Subwoofer (Except Convertible Includes Two s.s• x 7.5" Front
and Two 5.25 " Rear SUbwoofers) and Four 2.5" Diameter Mid-Range Tweeter Speakers.
Tr ailer Towing Towing capable Ye.sJNo Yes
Eng1ne/lransmission/axle Std/Opt Standard
Tow class (I. II, Ill)" Std'Opt Class I
Max. grOS& trailer wgt. (lbs.) Std/Opt 1000 / NIA
Max. trailer tongue load (lbs .) Std'Opt 100/N/A
Towing package available Yes/No No
• Class I - 2,000 lbs. Class II - 3.500 lbs. Class Ill - 5,000 lb&
Page 21
MVMA Specifications Vehicle Line __:.:M.:.::U:.aSa..T"'"A.:;.N;::.:G=----------------------
METRIC (U.S. Customary) Model Year _1_996~--- Issue d ---=8/=2=519'-"-"5 __ Revised( •) _______ _
Vehlcl e Dim ension s See Key Sheets for definitions All cimeNlions to ground are for comparative purposes only. Omens ions are to be shown for all base body model$ of each vehicle line. SAE Ref. no. rafers to the dehrubon publlShed 1n SAE Recommended Pr.M:tice Jl 100 "MolOf Vehicle OJlllellSIOI\S," unless olherwi5e &peci!led
Modal CocM/Deacrlptlon
Width Tread (front)
T read (rear)
Vehicle width
Body width Ill 5g RP (front)
Vehicle width (front doors open)
Vehicle width (rear doors open)
Tumbl&-home (degrees)
Outside mirrof Width
Length Wheelbase
Vehicle length
Overhang (front)
Overhang (rear)
Upper stnleturll length
Rear wheel C/1. ")(' coordinate
Heighr Passenge r dtstnbution (!root/rear)
Tnmk/Qf90 load
Vehicle height
Cowl point to ground
Deck point to ground
Rocker panel•lront to ground
Rocker panel-rear to ground
Windshield slope angle (degrees)
Back11ght slope angle (degrees)
Ground Clearance* Front bumpe r to ground
Rear bumper to ground
Bumper to ground front at curb mass (wt )
Bumper to ground rear at curb mass (wt.)
Angle of approac:h (degrees)
Angle of departure (degrees)
Ramp breakover angle (degrees)
Axle differential to ground (front/rear)
Min. runn '1ng ground clearance
Location of min. run . grd. clear.
SAE Ref. No -W101
W102
W103
W117
W120
W121
w,22 W410
L101
L103
L104
L105
L123
L127
PDl.2,3
H101
H114
H138
H112
H111
H122
H121
H102
H104
H103
H105
H106
H107
H147
H153
H156
COUPE (BASE and GT)
(FOR COBRA MODELS SEE PAGE 22A)
1537 (60.5); 1527 (60 .0) w/GT
1502 (59.2) ; 1490 (58.7) w/GT
1823 (71.8)
1749 (68.9)
26°
1963 (n .3)
2572 (10 1.3)
4609 (18 1.5)
1022 (40.2)
1016 (40.0)
2535 (99.8)
4193 (86.4)
2/2
0 1351 (53.2); 1355 (53.4) w/GT
948 (37.3 ); 949 (37.3) w/GT
1003 {39.5); 10 17 (40.0) w/GT
160 (6.3)
156 (6. 1) 54•
66.3 °
250 (9.8)
300 (11 .8)
187 (7.4); 183 (7.2) w/GT
351 (13.8); 363 (14.3) w/GT
15.9°; 15 .3° w/GT
16.2°; 19 .9° w/GT
43 .3 (1.7 )
102,6 (4 .0)
RH Lt.-Off Catalyst; LH Catalys t w/GT
CONVERTIBLE (BASE and GT)
2470 (97.2)
1356 (53. 4)
949 (37.3) ; 944 {37.2) w/GT
1016 (40 .0) ; 102 4 (40.3) w/GT
165 (6 .5)
62.9°
233 (9.2)
3 16 (12.4)
182 (7 .17); 178 (7.0) w/GT
348 (13.7); 360 (14 .2) w/GT
15.7°; 15.0 ° w/GT
16 .7"; 19 .7° w/GT
39.3 (1.5)
90.3 (3.6); 85 .8 (3.4) w/GT
X-Braoe
• All vehicle height and ground clearances are measured at the Manufacturer's Des ign Load W eight Manufacturer's Design Load We ight ls defined with Indicated passenger distnbullon and trunk/cargo load, unless otherwlse specified .
AD linear dnnensions are 1n milbme ters (inches) unless othe rw ise noted .
Page22
MVMA Specifications Vehicle Une ---=M""'U""ST--'-'--'A""'N=G __________________ _ 1996 Issued -=8/2=5/9=5"----_ Re vised( • ) _ ______ _ Model Year
METRIC (U .S. Cu stomary) Vehlcle Dimensions See Key Sheets for definitions All dimensions to ground are tor comparative purposes ONy. 0 W'n8NIOns are to be shown fo, ..U base body models of each vehlcle llne. SAE Rel. no. ref e,s to lhe definition published In SAE Ae,oonvnended Pracbce J1100 "Molor Vehlel o Oilnen$ion$,' unless olhelw1se spectf,ed
Model Code/Description
Width Tread (lront)
Tread (rear)
Vehtcie width
Body width at Sg AP (front)
Vehicle width (fron t doors open)
Vehicle width (rear doors open)
Tumble-home (degrees)
Outside mirror width
Length Wheelbase
Vehicle leng1h
Ollerhang (front)
Ollerhang (rear)
Upper sb'ucture length
Rear wheel Cll. "X" coordinate
Height" Passenger dis tribution (front/rear)
TN nkt'ca,rgo load
Vehicle height
Cowl point to ground
Deck point to ground
Rocker panel-front to ground
Rocker panel-rear to ground
Wmdshleld slope angle (degrees)
Backlight slope angle (dogrees)
Ground Cl earance• Front bumper to ground
Rear bumpe r to ground
Bumper to ground front at curb mass (wt.)
Bumper lo ground rear at curb mass (wt.)
Angle of 8pproech (de grees)
Angle of departure (degrees)
Ramp bfeakover angle (degrees)
Axle difleremiaJ to ground (front/rear)
Min. running ground clearance
locabon of min. N n. grd . clear.
SAE Ref . No. W101
W102
W103
W117
W120
W121
W122
W41 0
L101
L103
L104
L105
L123
L127
P01 ,2,3
H1 0 1
H 11 4
H138
H112
H 111
H 122
H1 21
H102
H104
H103
H105
H106
H107
Hl 47
H153
H156
I COBRA COUPE
(FOR BASE AND GT MODELS SEE PAGE 22)
1524 (60.0)
1491 (58.7)
1823 (71.8)
1749 (68.9)
26 °
1963 (77. 3)
2572 (10 1.3)
4636 (182.5)
1040 (41 .0)
10 16 (40.0)
2535 (99 .8)
4193 (86.4)
2 / 2
0
1351 (53 .2)
952 (37.5)
1017 (40 .0)
160 (6.3)
156(6 .1) 54 •
66.3 "
250(9.8)
300 (11 .8)
183 (7 .. 2)
363 (14.3)
1s .2·
19.9°
• All vehicle hefgh1 and ground clearances are measured st the Manufacturer's Design Load Weight Manufacturer's Oesign Load Weight IS defined with Indicated passenger dn;tnt>won end trunk/cargo load , unless otherw1se speafied.
All llnear dimens lOns sre In rrull,meters (inches) unless o~rwise noted.
Page 22A
MVMA Specifications METRIC (U.S. customary) Vehlcle Dimensions See Key Sheets for deflnitJons
Rear Compartm ent SgRP point couple distance L50 684 (26.9)
EffectMt head room H63 912 (35.9)
Min. effectille leg room l51 770 (30.3)
SgRP (second to hee~ H31 276 (10.9)
Knee clearance L48 ·82 (·3.2)
Shoulder room W4 1324 (52.1)
Htproom W6 1239 (48.8)
Upper body opening to ground HS1
Back angle (degrees) L41 24°
Hip angle (degrees) L43 76 .7&
Knee angle (degrees) L45 68 .6&
Foot angle ( degrees) L47 110 .7°
Depressed floor covering thickness H73
Lugg age Comp artm ent Usable luggage capacity L (cu. ft.) V1 308 (10.9)
Uftover height H195 76 7 (30.2)
Interior Volum es (EPA Class ifi cati on) Vehicle class Subcompact
Interior IIOlume index including trunk/cargo (cu. ft.) .. 94 .0
T runk/cargo index (cu. ft) 10.9
• See page 14. - See def1nrtion page 33. All linear dime nSIOOs are in mimmeters (inches) unless otherwise noted.
Page 23A
MVMA Specifications METRIC (U.S. Customary) Vehlcle Dimensions See Key Sheets for definitions
Vehicle Line --"M"'U"'S"-T"""A"""N""'G"'--___ __ ___________ ___ _
Model Year 1996 Issued --=B/2=5/9=5=---Revised (•) ___ _ ___ _
Model CodeJl)eacription .-I A_L_L_M_O_D_E_L_S ___________________________ __,
Stat ion Wagon/MPV· SAE . Ref.
- Third Seat No. (NOT APPLICABLE)
Seat facing direction S0 1
SgRP couple distance L85
Shoulder room was Hip room W86
EffectiYe log room L86
EffectNe head room H86
SgRP to heel point H87
Knee c.leamnce LB7
Back angle (degrees) L88
Hip angle (degrees) LB9
Knee angle (degrees) L90
Foot angle (degrees) L91
Station Wagon/MPV* - Cargo Space (NOT APPLICABLE)
cargo length (open front) l200
Cargo length (ope n second) l201
Cargo length (closed front) l.202
ca,go length (closed sec:ond) l203
Ca,go length at belt (front) l204
Cargo length at belt (&econd) l205
Oa,go width (wheelhouse) W201
Rear opening width at floor W203
Opening width at belt W204
Min rear opening width above belt W205
cargo height H201
Rear opening height H202
Ta ilgate to ground height H250
Front seatbac;k to load floor height H197
Cargo volume index m3(ft. 3) V2
Hidden cargo volume index m3(ft. 3) V4
Cargo volume index-rear of 2•saat V10
Cargo volume index • V6 Cargo W1dth at 11oor• wsoo Maximwn cargo height" HSOS
Hatchback - Cargo Space (NOT APPLICABLE) Cargo length at front seatback he,ght l208
cargo length at floor (front) l.209
cargo length at second saatback height l210
Cargo length at floor ($eCOOdl l211
Front saatbac k to load floor height H197
5econd seatbad< to load ffOOf height H198
ca,go volume index m3(rt. 3) V3
tfidden cargo IIOlume Index m3(ft. 3) V4
Cargo volume index-rear of 2-seat V11
All hnear dimensions are 1n millimeters (inches) unless othelWlse noted. • MPV· Multipurpose Vehicle
Page24
MVMA Specifications METRIC (U.S . Cu stomary)
Vehicl e Line --'-'M"""U""'ST"--'-'-AN-"-'-'G"----------------------Model Year 1996 Issued 8/25/95 Revise d (•) _______ _
D.sc riptl on ALL MODELS Moct.l Cod•/ I Veh icle Fiduc ial Mark s
Fiducial Marie Number" Define Coordinate LocatJon
The rea r vertica l edge of the master control notc h on the underside of the front door rocke r panels locates the "X" coo rdinate
relative to body grid and is located at the 23 15 (91 .1) line.
Front(l) (Front Location)
X=2315 (91.1)
Y: 823 (32.4)
Z = 437 (17.2)
Front(2)
Rear(1) (Rear Location)
X = 3720 (146.5)
Y = 837 (32.9)
Z"' 438 (17.2)
Rear(2)
Note:Provlde The inte rsection of the horizontal-vertical surfaces on the rocker pane l door rabbet locates the "Y" and "Z' coordinates relative to 3of 4
body gnd at particular fore-aft inch lines. The fore-aft location can be determ ined by the refe rence dimension from F1duc1aJ Mark 1 Fiducial Ma.rk Locations and 2.
w21•• 823 (32.4} L54 .. 2315 (91.1)
Front H81 .. 437 (17.2} H1 61 .. -H1ss•• -
w22.·· 837 (32.9) L5S .. 3720 (146 .5)
R1Jar H82"' 438 (17.2) H162°' -H164 "" -
• Reference - SAE Recommended Practice. J182a. Motor Vehicle F1duc1al Marks. " Reference - SAE Recommended Practice, J 11 00 • Motor Vehicle Dimensions. All linear dunensions are 1n millimeters (inches) unless otherwise noted.
Page 25
MVMA Specifications METRIC (U.S . Cu stomary)
Code Model
3.8L Engine - Code 994 /
5-Spd. Man. Trans. - Code 445
9941445 63 (BJ)
Mustang Model
2·0oor Coupe
994/445 76 (BH)
Mustang Model
2-Door Convertible
3.8L Engine - Code 994 I 4-Spd . Auto . Trans. - Code 44U
994/44U 63 (BJ)
Mustang Model
2-Door Coupe
994 /44U 76 (BH)
Mustang Model
2•Door Convertible
4.6L (SOHC) Engine - Code 99X /
5-Spd. Man . Trans. - Code 445
99X/445 63 (BJ)
Mustang GT Mode l
2-Door Coupe
99X / 445 76 (BH)
Mustang GT Model
2-Door Convertible
Front
759
(1673)
813
(1992)
800
(1763)
854
(1883)
817
(1801)
873
(1924)
Vehicle Line ___;;;M.:..;:U:..;:ST'-'-'-AN:;..;.;aG:....-_ _________________ _
Model Year 1996 Issued 8125/95 Revised( •) ___ ____ _
Vehicle Mass (weight) % PASS MASS DISTRIBUTION
CURB MASS, kg. (lb )" Pass in Front Pass in Rear SHIPPING
MASS ETWC .. Rear Total kg(lb)" .. Code Front Rear Front Rear
633 1392 1335 T 45 55 19 81
(1395) (3068) (2943)
667 1480 1423 V 45 55 19 81
(1471) (3263) (3138)
632 1432 1375 u 45 55 19 8 1
(1394) (3157) (3032)
665 1519 1462 V 45 55 19 8 1
(1466) (3349) (3224)
670 1487 1429 V 45 55 19 81
(14n) (3278) (3150)
702 1575 1517 X 45 55 19 81
(1547) (3471) (3346)
• Reference - SAE J 1100 Motor vehicle dimensions, curb we,ght defin,toon •• ETWC - Equivalent Test Weight Class- basis for U S. Environmental Protection Agency emission certifications
Refer to ETWC code legend below for test weight class .
ETWCLEGENO
A = 1000 I =2000 a = 3000 y = 4000 •·•Sh ipping Mass (weigtlt) = Curb Weight Less:
8 :a1125 J = 2125 R :a 3125 z = 4250 57 (125) w/3.8L Engine C = 1250 K =2250 s = 3250 AA = 4500 D = 1375 L : 2375 T = 3375 88 :a4750 58 (128) w/4 .6L (SO HC) Engine E aa1500 M = 2500 u =3500 cc =5000 F = 1625 N =2625 V = 3625 DD = 5250 G = 1750 0 = 2750 w =3750 EE = 5500 H = 1875 p : 2875 X = 3875 FF : 5750
Page26
MVMA Specifications METRIC (U .S. Cu st om a ry)
Code Model
4.6l (SOHC) Engine - Code 99X /
4-Spd . Auto. Trans. - Codo 44U
99X / 44U 63 (BJ)
MustanQ GT Mode l 2•0oo r Coupe
99X / 44U 76(BH )
Mustang GT Model
2 -Doo r Convertibl e
4.6l (DOHC) Engine - Code 99V /
5-Spcf. Man . Trans . - Code 445
99V / 445 63 (BJ)
Mustang Cobra Model
2-Doo r Coupe
Front
857 (1890)
91 4
{20 15)
848
(1869)
Vehicle Line ~ M-'-'U--"S~T~AN~ G ________________ _ _ _
Model Year 1996 Issued 8/25/95
Vehic le Mass (weight} % PASS MASS DISTRIBUTION
CURS MASS, kg . (lb r Pass in Front Pass in Rear SHIPPI NG
MASS ETWC .. Rear Tolal kg{lb)" " " Code Front Rear Front Rear
670 1527 1469 w 45 55 19 81
(1477) (3367) (3239)
698 1612 1554 X 45 55 19 81 ( 1539) (3554) (3426)
691 1539 1481 w 45 55 19 81
(1524 ) (3393) (3265)
• Reference - SAE J 1100 Motor vehlCle dimensions, curb weight delinition. .. ETWC - Equivalent Test Weight Class - basis for U.S. ElMronmenlal Proledlon A!Jency enuss,on certifications.
Refer to ETWC code legend below tor lest weight class.
E"TWCLEGEND
A = 1000 I .. 2000 Q = 3000 y =4000 ... Shippng Mass (weight) = Curb Welgit Leu:
B = 1125 J ., 2125 R = 312S z = -4250 58 (128) w/4.6L (SOHC) & (OOHC) Engines C = 1250 K .. 22so s =3250 AA = -4500 0 = 1375 L =2375 T :33 75 BB = -4750 E = 1500 M = 2500 u = 3500 cc =5000 F = 1625 N =2 625 V =3625 DD =5250 G = 1750 0 •2750 w a 37S0 EE = 5500 H = 1875 p :: 2875 X =38 75 FF = 5750
Page26A
MVMA Specifications METRIC (U.S. Customary)
V ehicle Line ----'-'M.;.;:U'-'ST'-'--'--AN~G;__. __ ____ _____ _____ _ _ _
Model Year 1996 Issued 8125/95 Revised( •) ____ _ __ _
Opti onal Equipment D ifferential Mass (weight)•
MASS, kg. (lb.)
Remarks Code Equipment Front Rear Tollll Restrictions, Requin1ments
Wheels :
64J Wheels, Cast Aluminum, 15" x r -5.7 -5.4 -11 .1 Available Mustang Models Only; (-12.6) (-11 .9) (-24 .5) Includes Standard P205/65 R15 Tir es
64H Whee ls, Cast Aluminum , 1r x 7.5 " 3.76 3.76 7.52 Available Mustang GT Models Only; {8.3) (8.3) (16 .6) Includes P245/45ZR17 Tires
Brakes:
552 Anti-Lode Brake System (ABS) 3.8 4.6 8.4 Included in Preferred Equ ipme nt
(8.45 ) (10 .1) (18 .55) Package (PEP) w/GT
Air Conditioning:
572 with Manua l Temperature Control 14.6 -1.2 13.4
and 3.8L Engine (32.2) (-2 .6) (29 .6)
572 with Manual Temperature Control 15.0 -1.3 13.7
and 4 .6L Engine . (33) (-2 .9) (30 .1)
Radio Systems:
- Electronic AM/FM Stereo w/ Cassette and 1.3 0.8 2.1
Prem ium Sound (2.9) (1.7) (4.6)
586 Maeh 460 Premium AM/FM Stereo 3.3 10.6 13.9 and Cassette w/ Coupe (7.3) (23.3) (30.6)
Exterior Vehicle And Body Dimensions - Key Sheet Dimensions Definitions
Seating Reference P0tnt SEATING REFERENCE POINT means the manufacturer' s design reference point which -(a) Establishes the reannost normal des ign driving or riding J)OSrtlon of each designated seatin g posmon in a veh icle · (b) Has COOfd1nates established relative to the design vehicle structure ; (c) Simulates the position of the pivot center of the human torso and thigh : and (d) Is the reference point employed to position the two dnnel\SlOnal templates described in SAE Recommended PraciJce J826, "Devices for Use in Defining and Measunng Vehicle Seating Accommodations ,".
Width Dimensions W101 TREAD- FRONT . The dimension measured between the bre
centerlines at the ground. W102 TREAD-REAR . The dimension measured between the bre
centerlines at the ground. tn case of dual wheels , the dunension will be measured to the centerline of tn and wheel assemblie s.
W103 VEHICLE WIDTH. The maximum dimension measured between the widest point on the vehicle, excluding exterior mirrors, fle1tible mud flaps, marker lamps , but includmg bumpe,s , moldings , sheet metal protrusions or dual wheels, if standard equipment.
W117 BODVWIDTHATSgRP-FRONT .Thed1mensionmeasured laterally between the widest points on the body at the SgRP-tront , excluding door handles , applied moldings , or appl,ques.
W120 VEHICLE WIDTH-FRONT DOORS OPEN . The dimension measured between the widest point on the front doors in maxnnum hold-open poslbon.
w,21 VEHICLE WIDTH-REAR DOORS OPEN . The dimension measured between the widest point on the rear doors in maxinun hold-open position. For vehicles with a rear door on only one side, this dimension IS ID the Z«o 'Y ' plane .
w,22 TUMBlE-HOME . STRAIGHT SiOE GLASS . The angle measured from a vertical to the outside surface of the front door glass at the SgRP "X " plane. CURVED SIDE GLASS . The angle measured from a Y9111cal to a chord extending from the i.wer DLO to the lower CLO at 1he outside surface of the front door glass at the front SgRP UX'' plane .
W410 OUTSIDE MIRROR WIDTH; The dmen$ion between the widest Point on the outside mirrors. The standard nght and left minor adjusted for normal driving will be shown unless ClhelWise noted . When Off"/ one outside minor is standard, the dmension will be to the zero "Y'' plane .
Length Dimensions L101
L103
L104
L105
WHEELBASE (WB). The dimensaon measured longitudtnally betWeen front and rear wl'Mlel center11nes. In case of dual rear axles, the dimension shal be to the midpoint of the centerlines of 1he rear wheels . VEHICLE LENGTH . The maximum dimension measured longitudinaly between the foremost point and the rearmost point on the vehlde , lllduding bumper, bumper guards , tow hooks and/or rub strips, if standard equipmenL OVERHAND- FRONT. The dmension measured longitudinally from the centeffine of the front wheels to the foremost poem on the vehicle inducing tJurrc)er, wnper gu#ds , tow hooks and/or rub strips, if standard equipment. OVERHANG-REAR. ThedimetlSionmeasuredlongitudinaly from the oent8ftine of the rear wheels ; or 11 the case of dual rear axles, the dimension shall be the midpoint of the centel1ines of the rear wheels, to the rearmost point on the wt1icle Including rear bumpers . bumper guards. tow hooks and rub strip5 , if standard equipmerL
Page31
L123
L127
UPPER STRUCTURE LENGTH. The d imension measured longitud1na.Hy trorn the cowl point to the deck point. REAR WHEEL CENTERLINE "X "' COORDINATE or in the case of dual rear axles, the coordinate shall be the nudp0in1 of the distance between the rear axle centertInes .
H•l9ht Dimensions H101
H111
H112
H114 H121
H122
H138 H109
VEHICLE HEIGHT . Thed1mens1on measured vertically from the highest point on the vehicle body to ground . ROCKER PANEL-REAR TO GROUND . The dimension measured vemcally from the bottom of the rocker or Side quarter pane l at the front of the rear Wheel opening, excluding flanges, to ground. ROCKER PANEL-FRONT TO GROUND . The dimensiOn measured vertically from the foremost pomt on the boUom of the rocker panels, excluding Ranges, to ground. COWL POlNT TO GROUND . Measured at zero " Y" plane . BACKUGHT SLOPE ANGLE. The angle between the vertJcal reference line and the surface of backllght at vehide zero -r · plane . For cwve bacldtght , the angle is to chofd of backlight an: from lower DLO to upper DLO . WINDSHIELD SLOPE ANGLE. The angle between the vertical reference line and a chord of the windshield arc running from the lo)ver DLO to the upper DLO at the vehide zero •y • plane . In the case of wrap over glass, the angle to be measured will be tanned by a chord 457 mm (1 ao in .) long drawn from the lower DLO to the intersecting point on the windshield . DECK POINT TO GROUND . Measured at zero "Y" plane . STATICLOAD-TIRERAOIUS-REAR .$peclfiedbythemanufacturer m accordance with oomposite TIRE SECTION STANDARD .
Ground Clearance Dimensions H102 FRONT BUMPER TO GROUND. The minimum dimension
measured vertically from the lowest point on the front bufr1)er to ground, including bumper guards, If standard equipment.
H103 FRONTBUMPERTOGROUND-CURBMASS(WT .) .Meu-ured In the same manner as H102.
H104 REAR BUMPER TO GROUND. The minimum dimension measured venically from the lowest point on the rear bumper to ground , including bumper guard$ , if standatd equipment
H105 REAR BUMPER TO GROUND-CURB MASS (WT.). Measured in the same manner as H104 .
H106 ANGLE OF APPROACH . The angle measured betww, a line tangent to the front tire slatiC loaded radius arc and the initial point of sttucilnl interference forward of the front tire to grou,d. The limiting structural a,mpo! ient shal be designated.
H107 ANGLE OF DEPARTURE . The angle measured between a line tangent ID the rear tire statJC loaded radius arc and the initial point of structural lllterference rearward of the rear tire to ground . The limiting component shall be designated .
H147 RAMP BREAKOVER ANGLE . The angle measured t>. tween two lines tangent to the front and rear tire static loaded radus and intersecting at a point on the underside of the vehicle which defines the largest ramp over which the vehicle can roll .
H153 REAR AXLE DIFFERENTIAL TO GROUND . The mirilTUTI dimension measured from the rear aJde differential to ground .
H156 MINIMUM RUNNING GROUND CLEARANCE . The ~ nun dimension measured from the sprung vehide to ground . Specify locatlon .
MVMA Specifications METRIC (U.S. Customary)
Interior V•hlcte And Body DlnHtnslons - K•y Sheet Dimensions Definitions
GlaUANu
S1 Windshield area S2 Side windows area. Includes the front door , rear door, vents,
and rear quarter Windows on both ~ of the vehicle . S3 Baddtght areas. S. Total a,ea. Total of al areas (St + S2 + S3).
Flduclal Merk Dimensions Flduclal Martt - Number 1
Flduc:lal Martt - Number 2 l.55 .. X"ooonilnala . WZ2. "'Y" coordinate . W82 "Z ' coordmate . H162 Height "Z ' coordinate to ground at curb weight. H164 Height 'T coordinate to ground .
Front Compartment Dtmenatona
L11 ACCELERATOR HEEL POINT TO STEER ING WHEEL CENTER. The dnnenslon measured honzontally from the AHP to the lnlersectlol, of the stw,ng column eenter11'Mt and a p&ane tangent 10 the upper sunace of the steemg wheel rm.
L17 DESIGNH-POINT-FRONTTRAVEL Thed1mensionmeas• ured hoi &ZOtltaly between the design H-point-front 1n the foremost and rearmost Mat track Po$itioc1S. (See SAE J1100)
L23 NORMAL DRIVING ANO RIDING SEAT TRACK TRAVEL The dimension measured horizontally between a point on the design !+point travel line from the SgRP to the displaced point on the design H-p,int trawl line witt'I the seat fflOY9d 10 lhe foremost seat po,sition , but not 110 inctude seat track travel used tor purposes other than normal driving and riding positions . (See SAE Jt 100).
L.31 SgRP-FRONT . "X" COORDINATED . l.34 MAXJMUMEFFECTIVELEGROOM-ACCEl..ERATOR . The
dimension measured along a line from the ankle pivot center to the SgRP - front plus 2S4 mm (1 0.Oln.) measured with right foot on the undepntssed accelerator pedal . For vehldes witt, SgRP to heel (H30) greater than 18 in... the aa::e1erator pedal may be depr&ssed as specified by the manufacturer . If the ac:celefator Is deptesaed , the manufacluntr shall place toot flat on pedal and note the depresaion of the pedal .
L..CO ~ANGLE-FRONT . The angle me&sufed t>etw--. a Wftical line thn)ugh the SgRP- tnn and the torso line . If the H111back Ml ~!stable , use the normal driving and riding position specified by the manutactur.r.
L-42 HIP ANGLE - FRONT. The angle measun!d between lOt1IO l1ne and thigh centerline .
l.A4 KNEE ANGLE -FRONT. The angle measured between thigh center11ne and lower leg c:enter11ne measured on the nght leg .
LA6 FOOT ANGLE- FRONT. The angle measured bet\~een the lower leg cen1ef1lne and a line tangent to the ball and heel ol the bare tool flesh line measured on the right leg. Ref SAE.J826 .
L53 SgRP -FRONTTOHEB... Thedtmet llionmaasurec, honzon. taly from the SgRP- lront to the ac:c:elerator heel point.
W3 SHOULDERROOM-FRONT .Theminimumdrmensionmeas• ured 1atera1y between the tnmmed surfaces on the "X" plane through the SgRP-front at height between the ben kne and 25'4 mm (10.0 in.) above the SgRP- front, excluchng the door assist strap and attac:hing pans.
Page32
WS
W9
H7
H18
H30
HSO
H61
H67
HIP ROOM-FRONT . The nununum dimension measured laterally between the tnmmed surfaces on the *X" plane through the SgRP-tront within 25 mm (1.0 rn.) below and 76 mm (3 .0 Ill .) above the SgRP-front and 76 mm (3.0 in.) fore and aft of the SgRP - front STEERING WHEEL MAXIMUM OUTSIDE DIAMETER. Define if other than l'OIXld. ACCEl..ERATOR HEEL POINT TO THE STEERING WHEB. CENTER. The dimension measured vertically from the AHP- front to the lnterMCt!On of the steenng column centerttne to a plane tangent to the upper surface of the steering wheel rim. STEERING WHEEL ANGLE. The angle measured from a vertJCaJ to the stn'face plane of the steenng wheel . SgRP- FAONTTOHEEL ThedmensionmeasuredvertJcally from the SgRP-tront to the a.oce1era!o1 heel P0ff'4. UPPER BOOY OPENING TO GROUND- FRONT The drmeosion measured vertlcally from the tnmmed body opening to the ground on the SgRP-front "X" plane . EFFECTIVE HEAD ROOM- FRONT. The dimension measured along a line a deg . rear of ver1icaJ from the SgRP - front 10 the headl,nmg plus 102 mm (4.0ln.) . FLOOR COVERING THICKNESS - UNDEPRESSED -FRONT. The dimension measured vertlealy from the surface of the undepfessed floor covering to the underbody sheet metal at the accelera10r heel point.
Aw Compa.bi.wwt Dllw.aiona L-4 1 BACK ANGLE-SECOND . The angle measured between a
vert1C:a1 hne through the SgAP-HOOnd and the 10niO line. L43 HIP ANGLE- SECOND. The angle measured between torso
lrne and thigh cent911ine. L45 KNEE ANGLE-SECOND . The angle measured between
thigh centertme and lower leg cenlerltne . L47 FOOTANGLE-SECOND.TheanglemeasurectbetwNnthe .
lower leg 0e11111rine and a llrle tangent 110 the baD and heel of the ~ devices bare foot flesh llrle (Reference J826 ).
L48 KNEE CLEARANCE - SECOND. The minimum dimension measured from the knee pivot cemer 110 the bad( of the front seatback minus 51 mm (2.0 in .).
l.50 SgRP COUPLE DISTANCE-SECOND . Thedimensionmeasured hortzontaUy from the driver SgRP-front 10 the Sg RP-sec:ond .
l51 M INIMUM EFFECTIVE LEG ROOM-SECOND . The dtmension rneasc.nd aaong a line from the ankle pivot center 10 the SgRP-second pws 254 mm (10.0 ,n,) .
W4 SHOULDER ROOM - SECOND. The m1111mum dimensl0f'r measured latently between door « qua11er tnmmed slM'faces on the "X" plane through the SgRP-second at height between 254-406 mm (10.~16.0 m.) abolle the SgRP - second , excluding the door IISSISlstraps and a1t&Ch1ng parts .
W6 HIP ROOM-SECOND . Measured., the same manner as WS.
H31 SgRP-SECONDTOHEa. Thedimensionmeasurectverucally from the SgRP-second to the two drrnensi<>naJ deVl08 heel Point on the depressed floof c:ovenng.
H51 UPPER BOOY OPENING TO GROUND-SECOND . The ~ me.asured V9t1ICally from the trimmed body opening to the 9r01m on the ·X" plane 330 mm (13.0 in.) lor#ard of the SgRP - second .
H63 EFFECTIVEHEAD AOOM- SECOND. Thednnens10nmeasured along a hne 8 deg . rear of ver11cal from the SgRP to the headlrnmg , ptus 102 mm (4 0 rn.).
H73 FLOORCOVEAING - DEPRESSED- SECOND.Thedrmension measured vertically from the heel potnt to the underbody sheet metal.
r.1VMA Specifications METRIC (U.S. Customary)
Interior Vehicle And Body Dimensions - Key ShNt Dimensions Definitions
Luggage Compartment Dimensions
V1 USABLELUGGAGECAPACITY-TotalofvolumesofindMd-ual pieces of standard luggage set plus H-boxes stowed 1n
the luggage co~ in accordance with the procedure descnbed in paragraph 8.2 of SAE.J11 ooa.
lntettor YohlmM (EPA Claaafflcatlon) The lntenor Volume Index IS listed for each body sty1e except two seaters . The Interior Volume Index estimates the space ma car. It IS based on tour measuremercs - head room, shoulder room. hip room, and leg room - for the front and rear seats . plus trunk capacity .
The Trunk/Cargo Index is an estimate of the S1Ze of the trunk/cargo space . In &tatJon wagons and hatchbacks 11 1s an estimate of the space behind the second seat
Station Wagon / MPY - Third a.at Dlmenalona
l8S
l86
L87
l.88
l.89 L90
L.91
W86 H86
H87 S01
SgRP COUPLE DISTANCE-THIRD . The dlmenslOn measured horizontally from the SgRP-second to the SgRP - thlrd. EFFECTIVE LEG ROOM-THIRD . Thed1mensionmeilSIXed along a hne from the ankle PMJ1 center to the SgRP- lhnd plus 254 mm (10.0 in.). KNEE CLEARANCE- THIRD . The minimum dimension from the knee PMJ1 centet to the back of second sealback minus
• constant of 51 mm (2.0 In.). With rear-facing third seat. Qffl8nSion IS measwed to closure . BACK ANGLE-THIRD . Measured in the same mamer as L41. HIP ANGLE-THIRD. Measured in the same manner as L43. KNEE ANGLE-THIRD . Measured In the same manne, as L.45 FOOT ANGLE-THIRD. Measured In the same maM8f as L-47. SHOULDERROOM-TH IRD.Measuredlnthesamernamer asW4 . HIP ROOM-THIRD . Measured in the same manner as W5. EFFECTIVE HEAD ROOM-THI RD. The d1rnensJon, meuU'9dalonga line Bdeg. fromtheSgRP-thlrdtothe headring rear of Y9rtlcal plUs a constant of 102 mm (4 .0 In.). SgRP-THIRO TO HEa POINT. SEAT FACING DIRECTION-THIRD .
Station Wagon / MPV - Cargo Space DIIMnalDna L.200 CARGO LENGTH-OPEN-FRONT . The minimum dimen
sion measured longitudinally from the back of the front sealback at the height of the undepres8ed floor CXMNing ID the raarmost pomt on the oodepressed floor covenng on the open tailgate or cargo surface if the rear closure IS a conventJOnal door type tailgate at the zero "Y' ' plane.
L.201 CARG O LENGTH-OPEN-SECOND . The dimension measured longitudinaly from the back of the aecond &eatback at the height of the undepfessed floor covering 10 the rurmost point on the undepi assed floor COY'8nng on the open tailgate or cago lloor surtace if the rur Closure is a CDnWl'1tlon8I door type 18ilgale, at the zero "Y" plane.
Page 33
l202 CARGO LENGTH-CLOSED- FRONT . The minimum dimension measured honzontally from the baek of the front seat at the height of the undepressed floor covenng to the rearmost point on the undepc'9SS8d floor covering on the closed tailgate or taildoo r for stabon wagons , tnlCks and mpv's at the zero "Y' ' plane .
L203 CARGO LENGTH-CLOSED-SECOND . Thedimens1on measured honZontally from the back of the second seat at the height of the undepressed floor oownng to the rearmost point on the undepressed floor covenng on the closed taltgate or talldoor for stallOn wagons , 1nJcks and mpV's at the %&fO "Y" plane.
L204 CARGO LENGTH AT BELT-FRONT. The minimum dimenston measured horizontally from the back of the front seatback at the seatback top to the foremost normal surface of the closed taJlgate or 1ns1de surface of the cab backpanel at the height of the belt , on the zero "Y'' plane .
L205 CARGO LENGTH AT BEl.T-SECONO . The m1n1mum dimensron measured honzontally from the back of the second sea1back at the seatback top to the foremost normal surface of the closed tailgate at the hetght of the belt. on the zero "Y' ' plane .
W201 CARGO WIDTH-WHEELHOUSE . Themln imumdimension measur9d laterally betWeen the tnmmed wheelhouslngs at lloor leYel. F« any Y8hic:le not tnmmed, measu re to the Shfftrnetal .
W203 REAR OPENING WIDTH AT FLOOR. The mnimum dimension measured laterally between the limiting inter · lerences of the rear opening at floor level .
W204 REAR OPENIN G WIDTH AT BELT. The min imum dimension measured laterally betWNCI the limiting artterfenlnces of the rear opening at belt height or top of l)ICk up box.
W205 REAR OPENING WIDTH ABOVE BELT. The minimum dimension measured laterally between the ~mltlng inter• fentt 10es of the rear opening above the belt height.
W500 CARGO WIDTH AT FLOOR. The maximum dimension measured laterally between the irnltmg Interferences at the floor level . This dmension shall include ribs and pillars, but will elCClude wheelho4.lses.
H197 FRONT SEATBACK TO LOAD FU:>OR HEIGHT. The cldnenalon measured Y811lcaly from the horizontal tangent to the top of the sea1bac:k to the undepressed l1oor covering .
H201 CARGO HEIGHT. The dimension measured vertically from the top of the undepressed floof covering to the headlirung at the rear whee l MX" coordinate on the zero "Y'' plane .
H202 REAR OPENING HEIGHT. The cfirnension measured ver1ICally from the top Of the undepressed floor covering to the upper tnmmed opening on the zero wy• plane with rear door fully open .
H250 TAILGATE TO GROUND CURB MASS (WT.). The dimenSIOl"I measured wr1ically from the top of 1he undepressed floor CO\l8ring on the lowered tailgate to ground on the zero '"Y'plane .
H505 MAXIMUM CARGO HEIGHT. The INlldmum wrtic:al dimension rear of the front seat from the cargo floor to roof bow or headiling at the zero '"Y' pane .
MVMA Specifications METRIC (U.S. Customary)
lnterto r Yehfcle And Body Dimensions - K.ey Sh-t Dimensions Definitions
V2
V4
V5
V6
V10
STATION WAGON
Measured in inches : W4 X H201 X l204
1728 • ft)
Measured '" mm: W4 xH201 xl.204
1oe - m3 (cubic meter) HIDDEN LUGGAGE CAPACITY- REAR OF FRONT SEAT .
The total volumes of 1ndillldual pieces of one set of standard
luggage stowed in any hidden cargo area below the load floor rear of the front seat.
mucKS ANO MPVS WITH OPEN AREA .
Measured in 1nct,es :
L506 x W505 x H503 1728 - ft'!
Measured in mm: l.506 X W500 X H503
109 • rn3 (cubic meter)
TRUCKS AND MPVS WITH CLOSED AREA
Measured in mches : L.204 X W500 X HS05
1728 • It' Measured in mm :
L.204 X WSOO X H505 1 ()II = m' (cubic meter)
HIDDENLUGGAGECAPACrTY-REAROFSECONDSEAT . The lioall volume ol individual pieces ol one set of standard luggage 5'0wed in any hidden cargo area below the load floor rear of the second seat. STATION WAGON CA RGO VOLUME INDEX. Measuracl in inches :
H201 X L.205 X W4 + W201
2 1728
Measured tn mm : H201 x l.205 X W4 + W201
2 109 • m3 (cubic meter)
Page34
Hatchback - Carvo s.,_ Dfmenalona All hatchback cargo d1menst0ns are to be taken with the front seat in fuO doWn and rear position. and the rear seat folded dOwn. The hatchback door is '" the dosed position . (For electronically adjusted seats, see the manufacturer's specsfical>OnS IOf DeP,Jn "H" P01nt). l.20EI CARGO LENGTH AT FRONT SEATBACK HEIGHT . The
minimum honzontal dimenSIOl'I from the .. X .. plane tangent to the rearmost surface of the dnvers Matback to the inside hmrtmg interference of the hatchback door on the vehlde zero "Y" plane .
L209 CARGO LENGTH AT FLOOR- FRONT . The mtnimum honzontal dimenst0n measured at floor level from the rear of the front seatback to the normal limiting Interference of the hatchback door on the vehicle zero "Y"' plane.
1.210 CA RGO LENGTH AT SECOND SEATBACK HEIGHT. The minimum dimension measured from the "X" plane tangerrt to the rearmost surface of second seatback or the load floor wtuch is stowed at least one half of the H198 dimension height above the rear load floor, to the reennost inside limiting interfe rence on the zero "X' ' plane.
l.211 CARGO LENGTH AT FLOOR-SECOND S~TBACK The minimum honzontat dimension measured at floof level from the rear of the second seatback or load floor panel 10 the normal lmlllng rn1erference of the ha~ door on the vehicle zero "Y" plane .
Ht97 FRONT SEATBACK TO LOAD HEIGHT. The dimension measured verwally from the honzontal tangent to the top of the sea1back to the undepcessed floor covenng.
Ht98 SECOND SEATBACK TO LOA D FLOOR HEJGHT: The dlmetlSion measured vemcaly from the seconct sealbactc to the undep 8SSed floor covering ..
V3 HATCHBACK. Measured In inches :
1.208 + L.209 x W4 X Ht 97 2
1728 Measured in mm:
1.208 + L.209 X W4 X H197 2
109 = m3 (cubic meter)
V4 HIDDENLUGGAGECAPACfTY-REAROFFRONTSEAT . The total volumes of cndrYldual pieces ol one set of standard luggage stowed m any hidden cargo area below the load floor rear ot the front seat.
V11 HATCHBACK CARG O VOLUME INDEX. Usable luggage (one (1) stand and luggage set) below floor: Measured in inches :
L2t0 + L2l l X W4 X Ht98 2
--""',""7""25~----- - tt3 Measured en mm:
l.2 l 0 + l.2ll X W4 X H198 2
.. m3 (cubic metef)
MVMA Specifications METRIC (U.S. Customary)
Index
Subject
Altemalof Axle Dnve, F!ont, Rear, AD Four .• Axle Shafts . . . • .