MoticMC2000

Contents

1. Installation Instructions·····················································1

MC2000 Driver Installation ···········································1 Installation of the USB2.0 Port PCI Card Driver ···················6

2. Motic MC2000································································9 Note: The intention of this guide is to provide quick instructions to key tasks of the Motic Images 2000 software. If more detail is needed or what you are looking for is not contained in this guide, please consult Help that comes with your software or visit our website http://www.motic.com.

1

Installation Instructions Before installing Motic MC2000, please read this chapter carefully and perform setup by

following the step-by-step instructions.

Preparation for Software Installation 1. Ensure your USB2.0 Port PCI Card is installed.

2. Ensure your Motic microscope is ready, and check that the Motic MC2000 cable is

NOT connected to the USB2.0 port of the computer.

MC2000 Driver Installation Before installing the Motic MC2000 Driver, please ensure that the USB2.0 Port PCI Card has

been installed (refer to the next chapter, Installation of USB2.0 Port PCI Card and Driver).

After installing the USB2.0 Port PCI Card, please restart the computer.

Installation of the Motic Camera Driver for Windows 2000

Click "Next".

Choose "Search for the�.", and click

"Next".

2

Select "Specify a Location", and click

"Next".

Click "Browse".

Please select: "MC1000AndMC2000",

and click "Open" to return to the previous

interface.

Click "OK".

3

Click "Next".

Click "Finish".

Installation of the Motic Camera Driver for Windows XP

Make sure the MC2000 device is connected

to the computer. The "Find New Hardware

Wizard" will then appear. Select "Install

from a list or specific location (Advanced)",

and click "Next".

4

Select the item "Include this location in the

search", and then insert the CD. Click

"Browse" to select the driver.

Locate the "MC1000AndMC2000" folder

from the CD files, and click "OK".

Please confirm the destination path, and

click "Next".

5

The Wizard will then search for the desired

files, please wait�..

Click "Continue Anyway" to continue.

Files will then be copied to your computer.

6

Click "Finish" to complete installation of the

MC2000 driver.

Installation of the USB2.0 Port PCI Card Driver For Windows 2000

The figure on the left shows the installation

location of the USB2.0 Port PCI Card, the

PC1 slot, into which the contact footing of

the said card is to be inserted.

Press the card down with the input sockets

plate attached to the sockets panel (usually at

the back) of your computer.

After installing the USB2.0 Port PCI Card,

the system will search for the USB2.0 Port

PCI Card automatically.

7

Click �Next�.

Choose �Search for the�.�, and click

�Next�.

Select �Specify a Location�, and click

�Next�.

Click �Browse�.

8

Please select: Nec\uPD720100 and click

�Open� to return to the previous interface.

Click �OK�.

Click �Next�.

Click �Finish�.

Under WindowsXP the system will auto detect the USB 2.0 Card and install its drives.

9

Motic MC2000 1. Before using Motic MC2000, select MC2000Camera.exe from the Settings options.

2. Upon starting MC2000, the Exposure and

White Balance operations will be carried out

automatically to make the quality and color

of images in the Preview window similar to

those of actual images. The interface will

then appear as it does on the left.

3. Through the Control panel, easily alter the quality and effects of the image shown in the

preview window.

4. From the Toolbar, click the Capture button to capture the real-time image

shown in the preview window.

The image captured will be saved in the current

user�s Temp folder.

5. Click the Auto Capture button (next to the Capture button) to automatically capture a

number of images.

10

6. Motic MC2000 enables you to record video.

From the Toolbar, click the Video button, fill in the

name and path and click �OK� to save the video.

Video will then start recording; click the STOP

button to stop recording.

7. Motic MC2000 enables you to adjust Brightness,

Contrast and Saturation. If you alter the brightness

or switch specimens during observation, use Auto

Exposure and White Balance to adjust the image.

8. This program also contains an ROI function.

Drag the mouse in the Preview window to define a

rectangle. Click the ROI button and this selected

area will then appear in the Preview window. Click

the ROI button again to restore the original image.

11

View ROI

9. Motic MC2000 also provides a Real-time Image Preview function. From the Toolbar, click

to select different filters with which to either process the whole image or just the defined region.

10. Motic MC2000 has the ability to capture clear and sharp images even in situations where

there is not enough light. From the Settings panel, users may also adjust many other capture

settings in order to achieve the desired image quality.

目 录

1. 安装指导 ······································································1

驱动程序的安装 ·························································1 USB2.0 Port PCI Card与驱动程序的安装···························6

2. Motic MC2000································································9 注意 本向导的目的是提供Motic MC2000软件主要功能的快速指导说明 如果您需要

更详细的说明 或者您需要得到解答的问题在本向导的涵盖内容之外 请参考

软件的联机帮助或者访问我们的网站 http://www.motic.com

1

安 装 指 导

请在软件使用前认真阅读安装指导 并在安装过程中严格按照下述步骤执行

使用前的准备工作 1. Motic MC 2000设备配套的 USB2.0 Port PCI Card已经安装好

2. Motic MC 2000设备配套的视频线与计算机没有连接

Motic MC2000驱动程序的安装

在安装Motic MC2000设备的驱动程序之前 请确保已经安装了 USB2.0 Port PCI Card

卡 具体安装方法请参考下节 USB2.0 Port PCI Card卡与驱动程序的安装 安装完

USB2.0 Port PCI Card卡以后 请重启计算机

在Windows 2000操作系统下安装Motic MC1000设备驱动程序:

点击 下一步 按钮

选择 �搜索��以后 点击 �下一步� 按

钮

2

选择 �指定位置�, 点击 下一步 按钮

点击 浏览 按钮

选择光盘目录 MC1000AndMC2000

后 点击 打开 回到上一个界面

点击 确定

3

点击 � 下一步�

点击 �完成�

在Windows XP操作系统下安装Motic MC2000设备驱动程序:

确定 MC2000 与计算机连接好 这时

会出现 找到新的硬件向导 对话框

选择 从列表或指定位置安装 按 下

一步 按钮继续安装

4

选择 在搜索中包括这个位置 这一项

然后在光驱中放入安装盘 按 浏览

按钮选择驱动程序

在光盘中找到 MC1000AndMC2000�文

件夹 然后点击 确定 按钮

确认对话框中的路径后 然后点击 下

一步 按钮

5

点击 仍然继续 按钮继续下一步的安

装

安装向导正在把驱动程序安装文件复制

到电脑上

按 完成 按钮 完成安装 MC2000 的

驱动程序

6

在Windows 2000操作系统下安装 USB2.0 Port PCI Card与驱动程序

左图显示了台式计算机中 USB2.0 Port

PCI Card的安装位置 PCI插槽如箭头所

示

将 USB2.0 Port PCI Card插入您的计算机

中的主板上的 PCI插槽

在安装 USB2.0 Port PCI Card以后 系统

自动寻找 USB2.0 Port PCI Card

点击 下一步 按钮

7

选择 �搜索��以后 点击 �下一步� 按

钮

选择 �指定位置�, 点击 下一步 按钮

点击 浏览 按钮

选择光盘目录 Nec\uPD720100 后 点击

打开 回到上一个界面

8

点击 确定

点击 � 下一步�

点击 �完成�

由于 USB 2.0卡的驱动程序在 Windows XP操作系统下会自动识别安装

这是就略过介绍

9

Motic MC2000

1.在使用 Motic MC2000 之前 进入设置选择捕捉器 MC2000.exe 即可运行 Motic

MC2000

2.启动Motic MC2000后 会自动计算曝光

和白平衡 使显示图像质量与色彩接近于

真实的图像 工作界面如左图所示

3.对控制面板中的各项参数加以设置 可以改变预览窗口中的图像质量和效果

4.点击窗口工具栏中的拍照按钮 你将捕捉到预览窗口所见到的实时图像

捕捉的图像将被存储在用户的Temp文件夹

下

5.也可以选择窗口工具栏中的自动拍照按钮 紧邻拍照按钮 自动采集若干

幅图像

10

6.Motic MC2000还具有录像功能 点击工具

栏上的录像按钮 输入录像内容保存的名称

及存储位置 点击 确定

开始录像 点击 STOP按钮可停止录像

7.在 Motic MC2000 中具有自动曝光 白平

衡 背景光校准 亮度 对比度 饱和度等

图像调整功能 如果观察中途改变显微镜的

光亮度或更换样本等 可以使用自动曝光和

白平衡功能来调整图像的质量 可参考左

图

8.同时还具有区域预览功能 如果在预览窗

口中拖动鼠标 划出一个方形区域 可以预

览已经选定的区域 再次点击该按钮可以恢

复全视场预览 如左图

11

区域预览/恢复(ROI)

9.Motic MC2000 中还具有实时图像预览处理功能 点选工具栏中的高级按钮

将可以选择不同的过滤器对全局实时图像进行处理 也可在预览窗口中对划出区域进

行处理 如下图

10.Motic MC2000具有针对外部光源亮度不够的情况能够拍出清晰的图片的功能 用

户可以从设置面板中进行更多的拍照设置

© 2003 Motic China Group Co., Ltd. All rights reserved. Motic is a

registered trademark and service mark of Motic China Group Co., Ltd.

Microsoft, Windows logo are registered trademarks of Microsoft

Corporation.

All other trademarks are the property of their respective owners.

© 2003 Motic China Group Co., Ltd.版权所有。

Motic 是 Motic China Group Co., Ltd.的注册商标。

Microsoft, Windows是Microsoft Corporation的注册商标。

所有其他产品及品牌均为其持有者的商标或注册商标。

Design Change:

The manufacturer reserves the right to make changes in instrument design in accordance with scientific and mechanical progress, without notice

and without obligation.

设计更改：因为技术进步，生产商有权在设计上作出革新，不再另行通知。

SP010911 2003.07.20