Motherboard Manual 8s651mp-Rz e

User's Manual

Intel Pentium® 4 Processor Motherboard

Rev. 100112ME-8S651MPRZ-1001

Copyright© 2003 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any fromwithout the expressed, written permission of GBT.

TrademarksThird-party brands and names are the property of their respective owners.

NoticePlease do not remove any labels on motherboard, this may void the warranty of this motherboard.Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make acommitment to update the information contained herein.

8S651MP-RZ /8S651MP-RZ-C

Mother B

oard8S651M

P-RZ

Jun. 25, 2004

Motherboard

8S651MP

-RZ

Jun. 25 ,2004

Preparing Your ComputerComputer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. Toprotect them against damage from static electricity, you should follow some precautions whenever youwork on your computer.

1. Unplug your computer when working on the inside.2. Use a grounded wrist strap before handling computer components. If you do not have one,

touch both of your hands to a safely grounded object or to a metal object, such as the powersupply case.

3. Hold components by the edges and try not touch the IC chips, leads or connectors, or othercomponents.

4. Place components on a grounded antistatic pad or on the bag that came with the componentswhenever the components are separated from the system.

5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX powerconnector on the motherboard.

Installing the motherboard to the chassisIf the motherboard has mounting holes, but they don't line up with the holes on the base and there

are no slots to attach the spacers, do not become alarmed you can still attach the spacers to themounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, sobe careful of your hands). In this way you can still attach the motherboard to the base without worryingabout short circuits. Sometimes you may need to use the plastic springs to isolate the screw from themotherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let thescrew contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise itmay damage the board or cause board malfunctioning.

- 4 -8S651MP-RZ Series Motherboard

Eng

lish Table of Content

Chapter 1 Introduction ................................................................................................ 5

Features Summary ..............................................................................................................................58S651MP-RZ Series Motherboard Layout .........................................................................................7Block Diagram .....................................................................................................................................8Hardware Installation Process ............................................................................................................9Step 1: Install the Central Processing Unit (CPU) .............................................................................9

Step 1-1: CPU Installation .........................................................................................................10Step 1-2: CPU Cooling Fan Installation ....................................................................................10

Step 2: Install memory modules ....................................................................................................... 11Step 3: Install expansion cards .........................................................................................................12Step 4: Install I/O Peripherals Cables ..............................................................................................12

Step 4-1: I/O Back Panel Introduction .......................................................................................12Step 4-2: Connectors Introduction ..............................................................................................13

Chapter 2 BIOS Setup .............................................................................................. 21

The Main Menu (For example: BIOS Ver. : E4) .............................................................................21Standard CMOS Features ................................................................................................................23Advanced BIOS Features ................................................................................................................25Integrated Peripherals .......................................................................................................................26Power Management Setup ................................................................................................................28

PnP/PCI Configurations ....................................................................................................................30PCI Health Status .............................................................................................................................31Frequency/Voltage Control ................................................................................................................32Top Performance ................................................................................................................................33Load Fail-Safe Defaults ......................................................................................................................33Load Optimized Defaults ....................................................................................................................34Set Supervisor/User Password .......................................................................................................34Save & Exit Setup ............................................................................................................................35

Exit Without Saving ...........................................................................................................................35

Chapter 3 Driver Installation ...................................................................................... 36

Introduction- 5 -

English

Chapter 1 IntroductionFeatures SummaryMotherboard � 8S651MP-RZ Series:

8S651M P-RZ / 8S651M P-RZ-CCPU � Socket 478 for Intel® M icro FC-PGA2 Pentium® 4 processor

� Support Intel® Pentium® 4 (Northwood, 0.13 m) processor� Intel Pentium®4 400/533 M Hz FSB� 2nd cache depends on CPU

Chipset � North Br idge:SiS 651� South Bridge:SiS 962L

Memory � 2 184-pin DDR sockets� Supports DDR200/DDR266/DDR333� Supports up to 2 un-buffer Double-sided DIMM DDR200/266/333� Supports up to 2GB (Max)� Supports only 2.5V DDR DIMM

Slots � 1 Universal AGP slot (4X) device support� 3 PCI slot

On-Board IDE � 2 IDE bus m aster (UDMA33/ATA66/ATA100/ATA133) IDEports for up to 4 ATAPI devices

� Supports PIO mode3,4 (UDM A 33/ATA66/ATA100/ATA133)IDE & ATAPI CD-ROM

On-Board Floppy � Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytesOn-Board Peripherals � 1 Parallel port

� 1 Serial port (COMA),1 VGA port,COM B on board� 6 x USB 2.0/1.1 (2 x Rear, 4 xFront by cable)� 1 Front Audio Connector� 1 IrDA connector for IR� PS/2 Keyboard interface and PS/2 Mouse interface

On-Board VGA � Build in SiS651 Chipset

On-Board LAN * � Build in RTL8201 ChipsetOn-Board Sound � Realtek ALC655 CODEC

� Line Out / 2 front speaker� Line In / 2 rear speaker(by s/w switch)� M ic In / center& subwoofer(by s/w switch)� SPDIF Out /SPDIF In� CD_In / Game Port

BIOS � Licensed Award BIOS� Supports Q-Flash

I/O Control � W83697HF

to be continued......

“*” For 8S651M P-RZ only.


Eng

lish

Please set the CPU host frequency in accordance with your processor 's specifications.We don't recommend you to set the system bus frequency over the CPU's specificationbecause these specific bus frequencies are not the standard specifications for CPU,chipset and most of the peripherals. Whether your system can run under these specificbus frequencies properly will depend on your hardware configurations, including CPU,Chipsets, Mem ory, Cards… .etc.

Hardware M onitor � CPU/System Fan Revolution detect� CPU/System Fan Control� CPU Overheat Warning� System Voltage Detect

Additional Features � Supports EasyTune 4� Supports @BIOS

Form Factor � 24.4cm x 21.5cm M icro ATX size form factor, 4 layers PCB.

Introduction- 7 -

English

8S651MP-RZ Series Motherboard Layout

“ * ” For 8S651MP-RZ only.

“ # ” For 8S651MP-RZ-C.

DIMM _LEDKB_MS

USB_LAN *

A TX_12V

CPU

_FAN

PWR_LE D

CO

MA

LPT SOC KET478

ATX

VGA

8S65

1MP-

RZ

FDD

CI

COMB

F_PANEL

BAT SYS _FAN

PCI2

PCI3

F_U SB1

W83

697H

F

BIOS

SiS 962L

IR

CODEC

F_U SB2

CLR_CMOS

F_AU DIO

CD_INGAM

ELI

NE_I

NLINE

_OUT

MIC

_IN

SiS 651

IDE1

IDE2AGP

PCI1

DD

R2

DD

R1

RTL820 1*

SUR_CEN

SPDIF_IO

-C#

21.5 cm

24.4

cm


Eng

lish Block Diagram

Pentium 4Socket 478

CPU

SiS 651

AC97CODEC

SiS 962L

CPUCLK+/- (100/133 MHz)

System Bus400/533 MHz

DDR

200/266/333MHzZCLK (66MHz)

HCLK+/- (100/133 MHz)

66 MHz33 MHz14.318 MHz

48 MHz

24 MHz

33 MHz

LPC BUS

AGP 4X

AGPCLK(66MHz)

3 PCI

PCICLK(33MHz)

AC97 Link

MIC

LINE

-IN

LINE

-OUT

6 USBPorts

ATA33/66/100/133IDE Channels

Floppy

LPT Port

PS/2 KB/Mouse

COM Ports

BIOS

W83697HF

Game Port

RTL8201 *

RJ45 *

VGA Port

CLK GENZCLK (66MHz)CPUCLK+/- (100/133 MHz)AGPCLK (66MHz)HCLK+/- (100/133 MHz)

PCICLK (33MHz)USBCLK (48MHz)

14.318 MHz33 MHz

“ * ” For 8S651M P-RZ only.

- 9 - Hardware Installation Process

English

To set up your computer, you must complete the following steps:Step 1- Install the Central Processing Unit (CPU)Step 2- Install mem ory modulesStep 3- Install expansion cardsStep 4- Install I/O Peripherals cables

Hardware Installation Process

Step 2Step 4

Step 4

Step 1

Step 4

Step 3

Step 1: Install the Central Processing Unit (CPU)Before installing the processor, adhere to the following warning:1. Please m ake sure the CPU type is supported by the m otherboard.2. The processor will overheat without the heatsink and/or fan, resulting in perm anent

irreparable damage.3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause im proper

installation. Please change the insert orientation.4. Apply thermal grease between the processor and cooling fan.5. Never run the processor without the heatsink properly and firmly attached. Perm anent

damage will result.6. Please set the CPU host frequency in accordance with your processor 's specifications.

We don't recomm end you to set the system bus frequency over the CPU's specificationbecause these specific bus frequencies are not the standard specifications for CPU,chipset and most of the per ipherals. Whether your system can run under these specificbus frequencies properly will depend on your hardware configurations, including CPU,Memory, Cards… etc.

HT functionality requirement content :Enabling the functionality of Hyper-Threading Technology for your com puter systemrequires all of the following platform components:- CPU: An Intel® Pentium 4 Processor with HT Technology- Chipset: An Intel® Chipset that supports HT Technology- BIOS: A BIOS that supports HT Technology and has it enabled- OS: An operation system that has optim izations for HT Technology


Eng

lish Step 1-1: CPU Installation

Figure 1.Pull the rod to the 90-degree directly.

Figure 2.Locate Pin 1 in the socket and look for a (golden) cut edge on theCPU upper corner. Insert the CPU into the socket. (Do not force theCPU into the socket.) Then m ove the socket lever to the lockedposition while holding pressure on the center of the CPU.

Step 1-2: CPU Cooling Fan Installation

Figure 1.Apply the therm al tape(or grease) to provide better heat conductionbetween your CPU and cooling fan.

Figure 2.Fasten the cooling fan supporting-base onto the CPU socket on themotherboard.

SocketActuationLever

Figure 3.Make sure the CPU fan is plugged to the CPU fan connector, thaninstall complete.


English

Step 2: Install memory modules

DDR

Support Unbuffered DDR DIMM Sizes type:64 Mbit (2Mx8x4 banks) 64 Mbit (1Mx16x4 banks) 128 Mbit(4Mx8x4 banks)128 Mbit(2Mx16x4 banks) 256 Mbit(8Mx8x4 banks) 256 Mbit(4Mx16x4 banks)512 Mbit(16Mx8x4 banks) 512 Mbit(8Mx16x4 banks)

Notch

Before installing the m emory modules, adhere to the following warning:1. When DIMM LED is ON, do not install / remove DIMM from socket.2. Please note that the DIMM module can only fit in one direction due to the one notch.Wrong orientation will cause improper installation. Please change the insert or ientation.

The motherboard has 2 dual inline memory m odule (DIM M) sockets. The BIOS will automaticallydetects memory type and size. To install the memory module, just push it vertically into the DIMMsocket. The DIM M module can only fit in one direction due to the notch. M emory size can vary betweensockets.

1. The DIM M socket has a notch, so the DIM Mmemory module can only fit in one direction.

2. Insert the DIMM m emory module vertically intothe DIM M socket. Then push it down.

3. Close the plastic clip at both edges of the DIMMsockets to lock the DIM M m odule.Reverse the installation steps when you wish torem ove the DIM M module.


Eng

lish Step 3: Install expansion cards

1. Read the related expansion card's instruction document before install the expansion card intothe com puter.

2. Please make sure your AGP card is AGP 4X (1.5V).3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to

install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmlydown on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar.

AGP Card

Step 4: Install I/O Peripherals CablesStep 4-1: I/O Back Panel Introduction

uv *

w

x

y z

{

| } ~

u PS/2 Keyboard and PS/2 Mouse connectorThis connector supports standard PS/2 keyboard and PS/2 m ouse.

v LAN port*LAN is fast Ethernet with 10/100M bps speed.

w USB portBefore you connect your device(s) into USB connector(s), please make sure your device(s) suchas USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also m akesure your OS supports USB controller. If your OS does not support USB controller, please contactOS vendor for possible patch or dr iver upgrade. For more inform ation please contact your OS ordevice(s) vendors.

x Parallel port (LPT)Device like printer can be connected to Parallel port.

y Serial port (COMA)Mouse and modem etc. can be connected to Serial port.

"*" For 8S651MP-RZ only.


English

z VGA portMonitor can be connected to VGA port.

{ Game/MIDI portThis connector supports joystick, M IDI keyboard and other relate audio devices.

| Line Out jackConnect the stereo speakers or earphone to this connector.

} Line In jackDevices like CD-ROM , walkm an etc. can be connect to Line In jack.

~ MIC In jackMicrophone can be connect to MIC In jack.After installation of the audio driver, you are able to use 2/4/6-channel audio feature by softwareselection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In"jack and connect "Center/Subwoofer" to "MIC In" jack.

Step 4-2: Connectors Introduction

1) ATX_12V 11) F_AUDIO2) ATX 12) SUR_CEN3) CPU_FAN 13) CD_IN4) SYS_FAN 14) SPDIF_IO

5) IDE1/IDE2 15) IR6) FDD 16) F_USB1/F_USB27) DIMM_LED 17) COMB8) F_PANEL 18) CI

9) PWR_LED 19) CLR_CMOS10) BAT

31 7

15

910 81716

14

4

6

5

18

13

11

1912

2


Eng

lish 1) ATX_12V (+12V Power Connector)

This connector (ATX _12V) suppliesthe CPU operation voltage (Vcore).If this " ATX_ 12V connector" is not connected, system cannot boot.

Pin No. Definition1 GND2 GND3 +12V4 +12V

2) ATX (ATX Power)AC power cord should only be connected to your power supply unit after ATX power cable and otherrelated devices are firmly connected to the mainboard.

1

1 02 0

1 1Pin No. Definition

1 3.3V2 3.3V3 GND4 VCC5 GND6 VCC7 GND8 Power Good9 5V SB (stand by +5V)

10 +12V

Pin No. Definition11 3.3V12 -12V13 GND14 PS_ON(soft on/off)15 GND16 GND17 GND18 -5V19 VCC20 VCC

3

1

42

3) CPU_FAN (CPU FAN Connector)Please note, a proper installation of the CPU cooler is essential to prevent the CPU from runningunder abnormal condition or damaged by overheating.The CPU fan connector supports Max.current up to 600 mA.

Pin No. Definition1 GND2 +12V3 Sense

1


English

4) SYS_FAN (System FAN Connector)This connector allows you to link with the cooling fan on the system case to lower the systemtemperature.

Pin No. Definition1 GND2 +12V3 Sense

1

5) IDE1/ IDE2(IDE1/IDE2 Connector)Please connect first harddisk to IDE1 and connect CDROM to IDE2.The red str ipe of the ribbon cable must be the same side with the Pin1.

IDE1IDE2

1

3 9

2

4 0

6) FDD (Floppy Connector)Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and2.88M bytes floppy disk types.The red str ipe of the ribbon cable must be the same side with the Pin1.

1

3 4

2

3 3


Eng

lish 7) DIMM_LED

Do not remove memory modules while DIMM LED is on. It might cause short or other unexpecteddamages due to the 2.5V stand by voltage. Remove m emory m odules only when AC Power cordis disconnected.

+ -

8) F_PANEL (2x10 pins connector)Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis frontpanel to the F_PANEL connector according to the pin assignment above.

HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)

Pin 2: LED cathode(-)SPK (Speaker Connector) Pin 1: VCC(+)

Pin 2- Pin 3: NCPin 4: Data(-)

RST (Reset Switch) Open: Normal OperationClose: Reset Hardware System

PW (Soft Power Connector) Open: Normal OperationClose: Power On/Off

MPD(Message LED/Power/ Pin 1: LED anode(+)Sleep LED) Pin 2: LED cathode(-)NC NC

SP K-SPK+

20

Spea ker

Conne ctor

1

19

IDE Hard Di sk

Acti ve L ED

Re set Switch

2 1

So ft Power

Co nnector

1

MPD+MPD-

Me ssa g e LED/Po we r /

Sle ep L ED

PW -

PW +

1

HD+HD-

1

RST+

RST-NC

1


English

+

9 ) PWR_LEDPWR_LED is connect with the system power indicator to indicate whether the system is on/off. It willblink when the system enters suspend mode. If you use dual color LED, power LED will turn toanother color.

1

Pin No. Definition1 MPD+2 MPD-3 MPD-

10) BAT (Battery)

CAUTIONDanger of explosion if battery is incorrectlyreplaced.Replace only with the sam e or equivalent typerecommended by the manufacturer.Dispose of used batter ies according to themanufacturer 's instructions.

If you want to erase CMOS...1. Turn OFF the computer and unplug the power cord.2. Rem ove the battery, wait for 30 second.3. Re-install the battery.4. Plug the power cord and turn ON the computer.


Eng

lish 11) F_AUDIO (F_AUDIO Connector)

If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize thefront audio header, your chassis must have front audio connector. Also please make sure the pinassigment on the cable is the same as the pin assigment on the MB header. To find out if the chassisyou are buying support front audio connector, please contact your dealer.Please note, you canhave the alternative of using front audio connector or of using rear audio connector to play sound.

Pin No. Definition1 MIC2 GND3 REF4 POWER5 FrontAudio(R)6 RearAudio(R)7 Reserved8 No Pin9 FrontAudio (L)10 RearAudio(L)

1 09

1 2

12) SUR_CENPlease contact your nearest dealer for optional SUR_CEN cable.

Pin No. Definition1 SUR OUTL2 SUR OUTR3 GND4 No Pin5 CENTER_OUT6 BASS_OUT

1

5 6

2

13) CD_IN

Connect CD-ROM or DVD-ROM audio out to the connector.

Pin No. Definition1 CD-L2 GND3 GND4 CD_R

1


English

15) IRMake sure the pin 1 on the IR device is aling with pin one the connector. To enable the IR functionon the board, you are required to purchase an option IR m odule. Be careful with the polar ity of theIR connector. For optional IR cable, please contact your local dealer.

Pin No. Definition1 VCC2 No Pin3 IR Data Input4 GND5 IR Data Output

1

14) SPDIF_IO (SPDIF In/Out)The SPDIF output is capable of providing digital audio to external speakers or compressed AC3data to an external Dolby Digital Decoder. Use this feature only when your stereo system hasdigital input function. Use SPDIF IN feature only when your device has digital output function.Be careful with the polar ity of the SPDIF_IO connector. Check the pin assignm ent carefully whileyou connect the SPDIF_IO cable, incorrect connection between the cable and connector willmake the device unable to work or even dam age it. For optional SPDIF_IO cable, please contactyour local dealer.

Pin No. Definition1 VCC2 No Pin3 SPDIF4 SPDIFI5 GND6 GND

1

6 2

5

16) F_ USB1 / F_USB2 (Front USB Connector)Be careful with the polarity of the F_USB connector. Check the pin assignment carefully while youconnect the F_USB cable, incorrect connection between the cable and connector will make thedevice unable to work or even dam age it. For optional F_USB cable, please contact your localdealer.

Pin No. Definition1 Power2 Power3 USB DX-4 USB Dy-5 USB DX+6 USB Dy+7 GND8 GND9 No Pin10 NC

2 10

1 9


Eng

lish 17) COMB (COM B Connector)

Be careful with the polar ity of the COMB connector. Check the pin assignm ent while you connectthe COMB cable. Please contact your nearest dealer for optional COMB cable.

Pin No. Definition1 NDCDB-2 NSINB3 NSOUTB4 NDTRB-5 GND6 NDSRB-7 NRTSB-8 NCTSB-9 NRIB-10 No Pin

1 9

1 02

18) CI (CASE OPEN)This 2 pin connector allows your system to enable or disable the "case open" item in BIOS if thesystem case begin rem ove.

Pin No. Definition1 Signal2 GND

1

19) CLR_CMOS (Clear CMOS)You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarilyshor 1-2 pin. Default doesn't include the "Shunter" to prevent from im proper use this jumper.

1

1

Open: Normal

Close: Clear CM OS

- 21 - BIOS Setup

English

Chapter 2 BIOS Setup

CONTROL KEYS< >< >< >< > Mov e to select item<Enter> Select Item<Esc> Main Menu - Quit and not sav e c hanges into CMOS Status Page Setup Menu

and Option Page Setup Menu - Ex it current page and return to Main Menu<+/PgUp> Increase the numeric v alue or make changes<-/PgDn> Decrease the numeric v alue or make changes<F1> General help, only for Status Page Setup Menu and Option Page Setup Menu<F2> Item Help<F5> Restore the prev ious CMOS v alue from CMOS, only for Option Page Setup Menu<F6> Load the file-safe default CMOS v alue from BIOS default table<F7> Load the Optim ized Defaults<F8> Q-Flash uti lity<F9> Sy stem Inform ation<F10> Sav e all the C MOS changes, only for Main Menu

BIOS Setup is an ov erv iew of the BIOS Setup Program. The program that al low s users to modify thebasic sy stem configuration. This ty pe of information is stored in battery -backed CM OS RAM so that itretains the Setup information w hen the pow er is turned off.

ENTERING SETUPPow ering ON the computer and pressing <Del> immediately w ill allow y ou to enter Setup. If y ou requirem ore adv anced BIOS s ettings , p leas e go to "Adv anc ed BIOS" s etting m enu. To enterAdv anced BIOS s etting menu, press "Ctrl+F1" key on the BIOS sc reen.

Main MenuThe on-line description of the h ighlighted setup function is display ed at the bottom of the sc reen.Status Page Setup Menu / Option Page Setup MenuPress F1 to pop up a sm all help w indow that descr ibes the appropria te key s to use and the pos sibleselec tions for the high lighted i tem. To ex it the Help Window press <Esc>.

The Main Menu (For example: BIOS Ver. : E4)Once y ou enter Aw ard BIOS C MOS Setup Utility , the Main Menu (as figure below ) w i ll appear on thescreen. T he Main Menu allow s y ou to select from eight setup func tions and tw o ex i t choices. Usearrow key s to s elect among the items and press <Enter> to accept or enter the sub-menu.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

} Standard CMOS Features

} Advanced BIOS Features

} Integrated Peripherals

} Power Management Setup

} PnP/PCI Configurations

} PC Health Status

} Frequency/Voltage Control

Top Performance

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

ESC: Quit higf: Select Item

F8: Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...


Engl

ish

• Standard CMOS FeaturesThis setup page includes all the i tems in s tandard c ompatible BIOS.

• Advanced BIOS FeaturesThis setup page includes all the items of Aw ard special enhanced features.

• Integrated PeripheralsThis setup page includes all onboard peripherals.

• Power Management SetupThis setup page includes all the items of Green func tion features.

• PnP/PCI ConfigurationThis setup page includes all the configurations of PCI & PnP ISA resources.

• PC Health StatusThis setup page is the Sy stem auto detect Temperature, v oltage, fan, s peed.

• Frequency/Voltage ControlThis setup page is control CPU clock and frequency ratio.

• Top PerformanceIf y ou w ish to max imize the performance of y our sy stem, set "Top Per formance" as "Enabled".

• Load Fail-Safe DefaultsFail-Safe Defaults indicates the v alue of the sy s tem parameters w hich the sy stem w ould be in safeconfiguration.

• Load Optimized DefaultsOptim ized Defaults indicates the v alue of the sy stem parameters w hich the sy stem w ould be inbest performance configuration.

• Set Supervisor PasswordChange, set, or disable passw ord. It allow s y ou to limit acces s to the s y stem and Setup, or justto Setup.

• Set User PasswordChange, set, or disable passw ord. It allow s y ou to limit access to the sy stem.

• Save & Exit S etupSav e CMOS v alue settings to CMOS and ex it s etup.

• Exit Without S avingAbandon all CM OS v alue changes and ex it s etup.

If you can't find the setting you want, please press "Ctrl+F1" to search the advancedoption hidden.

- 23 - BIOS Setup

English

Standard CMOS Features

DateThe date format is <w eek>, <month>, <day >, <y ear>.

Week The w eek, from Sun to Sat, determined by the BIOS and is display onlyMonth The m onth, Jan. Through Dec.Day The day , from 1 to 31 (or the max imum allow ed in the m onth)Year The y ear, from 1999 through 2098

TimeThe times format in <hour> <m inute> <second>. The time is c alc ulated bas e on the 24-hour

military -time clock. F or ex ample, 1 p.m. is 13:00:00.

IDE Pr imary Master, Slave / IDE Secondary Master, SlaveThe category identi fies the ty pes of hard d isk from driv e C to F that has been insta lled in the

computer . There are tw o ty pes: auto ty pe, and manual ty pe. Manual ty pe is user-definable; Auto ty pew hich w ill autom atically detect HDD ty pe.Note that the spec ifications of y our driv e must matc h w ith the driv e table. The hard d isk w ill not w orkproperly if y ou enter improper information for this category .If y ou s elect User Ty pe, related information w il l be asked to enter to the fol low ing items. Enter theinformation di rectly from the key board and press <Enter>. Such information should be prov ided in thedocum entation form y our hard disk v endor or the sy stem manufacturer.

Cy linder Number of cy lindersHead Number of headsPrec omp Write precompLanding Zone Landing zoneSec tor Number of sec tors

If a hard disk has not been installed, selec t NONE and press <Enter>.

CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwareStandard CMOS Features

Date (mm:dd:yy) Fri, Jan 9 2004Time (hh:mm:ss) 22:31:24

} IDE Primary Master [None]} IDE Primary Slave [None]} IDE Secondary Master [None]} IDE Secondary Slave [None]

Drive A [1.44M, 3.5"]Drive B [None]Floppy 3 Mode Suport [Disabled]

Holt On [All, But Keyboard]

Base Memory 640KExtended Memory 127MTotal Memory 128M

higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General HelpF5: Previous Values F6: Fail-Save Default F7: Optimized Defaults

Item HelpMenu Level}Change the day, month,year

<Week>Sun. to Sat.

<Month>Jan. to Dec.

<Day>1 to 31 (or maximumallowed in the month)

<Year>1999 to 2098


Engl

ish Drive A / Drive B

The category identifies the ty pes of floppy disk driv e A or driv e B that has been instal led in thecomputer.

None No floppy driv e insta lled360K, 5.25" 5.25 inch PC-ty pe standard driv e; 360K by te capacity .1.2M, 5.25" 5.25 inch AT-ty pe high-density dr iv e; 1.2M by te capacity

(3.5 inch w hen 3 Mode is Enabled).720K, 3.5" 3.5 inch double-sided dr iv e; 720K by te capacity1.44M, 3.5" 3.5 inch double-sided driv e; 1.44M by te capacity .2.88M, 3.5" 3.5 inch double-sided driv e; 2.88M by te capacity .

Floppy 3 Mode Support (for Japan Area)Disabled Normal Floppy Driv e. (Default v alue)Driv e A Driv e A is 3 mode Floppy Driv e.Driv e B Driv e B is 3 mode Floppy Driv e.Both Driv e A & B are 3 mode Floppy Dr iv es.

Halt onThe c ategory determines w hether the computer w ill stop if an error is detected during pow er up.

No Errors The sy stem boot w ill not s top for any error that may be detected and y ouw ill be prompted.

All Errors Whenev er the BIOS detects a non-fatal er ror the s y stem w i ll be stopped.All, But Key board The s y stem boot w ill not stop for a key board error; i t w ill stop for all other

errors . (Default v alue)All, But Disk ette The sy stem boot w ill not stop for a disk error; it w ill stop for all other errors.All, But Disk /Key The sy stem boot w ill not stop for a key board or disk error; it w ill stop for all

other errors.

MemoryThe c ategory is display -only w hich is determined by POST (Pow er On Self Test) of the BIOS.

Base MemoryThe POST of the BIOS w ill determine the amount of base (or conv entional) memory ins talledin the sy stem.The v alue of the base memory is ty pic ally 512K for sy stems w ith 512K memory installed onthe motherboard, or 640K for sy stems w ith 640K or more memory installed on the motherboard.

Extended MemoryThe BIOS determines how much ex tended memory is present during the POST.This is the am ount of memory located abov e 1 MB in the CPU 's memory address map.

- 25 - BIOS Setup

English

Advanced BIOS Features

First / Second / Third Boot DeviceFloppy Select y our boot dev ice priority by Floppy .LS120 Select y our boot dev ice priority by LS120.HDD-0~3 Select y our boot dev ice priority by HDD-0~3.SCSI Select y our boot dev ice priority by SCSI.CDROM Select y our boot dev ice priority by CDROM.ZIP Select y our boot dev ice priority by ZIP.USB-FDD Select y our boot dev ice priority by USB-FDD.USB-ZIP Select y our boot dev ice priority by USB-ZIP.USB-CDROM Select y our boot dev ice priority by USB-CDROM.USB-HDD Select y our boot dev ice priority by USB-HDD.LAN Select y our boot dev ice priority by LAN.Disabled Select y our boot dev ice priority by Disabled.

Boot Up Floppy Seek

During POST, BIOS w ill determine the floppy disk driv e installed is 40 or 80 tracks. 360K ty pe is40 tracks 720K, 1.2M and 1.44M are all 80 tracks.

Enabled BIOS searches for floppy disk driv e to determine it is 40 or 80 tracks. Notethat BIOS can not tell from 720K, 1.2M or 1.44M driv e ty pe as they areall 80tracks.

Disabled BIOS w ill not search for the ty pe of floppy disk driv e by track number. Notethat there w ill not be any w arning message if the driv e installed is 360K.(Default v alue)

Password CheckSy stem The sy stem w ill not boot and w ill not access to Setup page if the correct

passw ord is not entered at the prompt.Setup The sy stem w ill boot but w ill not access to Setup page if the correct passw ord

is not entered at the prompt. (Default v alue)

First Boot Device [Floppy]Second Boot Device [HDD-0]Third Boot Device [CDROM]Boot Up Floppy Seek [Disabled]

Password Check [Setup]


CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwareAdvanced BIOS Features

Item HelpMenu Level}Select Boot Devicepriority

[Floppy]Boot from floppy

[LS120]Boot from LS120

[HDD-0]Boot from First HDD

[HDD-1]Boot from Second HDD


Engl

ish Integrated Peripherals

IDE1 Conductor CableAuto Will be automatically detected by BIOS.(Default Value)ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure y our IDE

dev ice and cable is compatible w ith ATA66/100/133).ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and

cable is compatible w ith ATA33).

IDE2 Conductor CableAuto Will be automatically detected by BIOS. (Default Value)ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure y our IDE

dev ice and cable is compatible w ith ATA66/100/133).ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and

cable is compatible w ith ATA33).

On-Chip Primary P CI IDEEnabled Enable onboard 1st channel IDE port. (Default v alue)Disabled Disable onboard 1st channel IDE port.

On-Chip Secondary P CI IDEEnabled Enable onboard 2nd channel IDE port. (Default v alue)Disabled Disable onboard 2nd channel IDE port.

AC97 AudioEnabled Enable onboard AC'97 audio function. (Default v alue)Disabled Disable this function.

IDE1 Conductor Cable [Auto]IDE2 Conductor Cable [Auto]On-Chip Primary PCI IDE [Enabled]On-Chip Secondary PCI IDE [Enabled]AC97 Audio [Enabled]

Onboard LAN Device (*) [Enabled]System Share Memory Size [32MB]USB Controller [Enabled]USB Legacy Support [Disabled]Init Display First [AGP]

Onboard Serial Port A [3F8/IRQ4]Onboard Serial Port B [2F8/IRQ3]Serial Port B Mode [Normal]Onboard Parallel Port [378/IRQ7]Parallel Port Mode [ECP]

x EPP Mode Select EPP1.7ECP Mode Use DMA [3]Game Port Address [201]Midi Port Address [330]Midi Port IRQ [10]


CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwareIntegrated Peripherals

Item HelpMenu Level u[Auto]Auto-detect IDE cable type

[ATA66/100/133]Set Conductor cable toATA66/100/133(80-pins)

[ATA33]

Set Conductor cable toATA33(40-pins)

"*" F or 8S651MP-RZ only.

- 27 - BIOS Setup

English

Onboard LAN Device (*)

Enabled Enable onboard LAN dev ice. (Default v alue)Disabled Disable onboard LAN dev ice.

System Share Memory Size4MB/8MB/16MB/32MB/64MB Set onchip VGA shared memory size.(Default Value:32MB)

USB ControllerEnabled Enable USB Controller. (Default v alue)Disabled Disable USB Controller.

USB Legacy SupportEnabled Enable USB Legacy Support.Disabled Disable USB Legacy Support. (Default v alue)

"*" F or 8S651MP-RZ only.

Init Display FirstAGP Set Init Display First to AGP. (Default v alue)PCI Set Init Display First to PCI.

Onboard Serial P ort AAuto BIOS w ill automatically setup the port A address.3F8/IRQ4 Enable onboard Serial port A and address is 3F8. (Default v alue)2F8/IRQ3 Enable onboard Serial port A and address is 2F8.3E8/IRQ4 Enable onboard Serial port A and address is 3E8.2E8/IRQ3 Enable onboard Serial port A and address is 2E8.Disabled Disable onboard Serial port A.

Onboard Serial P ort BAuto BIOS w ill automatically setup the port B address.3F8/IRQ4 Enable onboard Serial port B and address is 3F8.2F8/IRQ3 Enable onboard Serial port B and address is 2F8. (Default v alue)3E8/IRQ4 Enable onboard Serial port B and address is 3E8.2E8/IRQ3 Enable onboard Serial port B and address is 2E8.Disabled Disable onboard Serial port B.

Serial Port B Mode

(This item allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip)ASKIR Set onboard I/O chip UART to ASKIR Mode.IrDA Set onboard I/O chip UART to IrDA Mode.Normal Set onboard I/O chip UART to Normal Mode. (Default Value)

Onboard Parallel port378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.Disabled Disable onboard LPT port.3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.


Engl

ish Paral lel Port Mode

SPP Using Parallel port as Standard Parallel Port.EPP Using Parallel port as Enhanced Parallel Port.ECP Using Parallel port as Ex tended Capabilities Port. (Default Value)ECP+EPP Using Parallel port as ECP & EPP mode.

EPP Mode SelectEPP 1.9 Compliant w ith EPP 1.9 v ersion.EPP 1.7 Compliant w ith EPP 1.7 v ersion.(Default Value)

ECP Mode Use DMA3 Set ECP Mode Use DMA to 3. (Default Value)1 Set ECP Mode Use DMA to 1.

Game Port Address201 Set Game Port Address to 201. (Default Value)

8209 Set Game Port Address to 209.8Disabled Disable this function.

Midi Port Address290 Set Midi Port Address to 290.300 Set Midi Port Address to 300.330 Set Midi Port Address to 330.(Default Value)Disabled Disable this function.

Midi Port IRQ5 Set Midi Port IRQ to 5.10 Set Midi Port IRQ to 10. (Default Value)

Power Management Setup

ACPI Suspend Type [S1(POS)]Soft-Off by PWR_BTTN [Off]System After AC Back [Off]IRQ [3-7, 9-15], NMI [Enabled]ModemRingOn [Enabled]PME Event Wake Up [Enabled]Power On by Keyboard [Disabled]

Power On by Mouse [Disabled]Resume by Alarm [Disabled]x Month Alarm NAx Day (of Month) 0x Time (hh:mm:ss) 0 0 0Power LED in S1 state [Blinking]

CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwarePower Management Setup


Item Help

Menu Level u[S1]Set suspend type toPower On Suspend underACPI OS

[S3]Set suspend type toSuspend to RAM under

ACPI OS

- 29 - BIOS Setup

English

ACPI Suspend TypeS1(POS) Set ACPI suspend ty pe to S1. (Default Value)S3(STR) Set ACPI suspend ty pe to S3.

Soft-off by PWR_BTTNOff The user press the pow er button once, he can turn off the sy stem.

(Default Value)Suspend The user press the pow er button once, then the sy stem w ill can enter

suspend mode.

System after AC BackLastState When AC-pow er back to the sy stem, the sy stem w ill return to the Last state

before AC-pow er off.Off When AC-pow er back to the sy stem, the sy stem w ill be in "Off" state.

(Default Value)On When AC-pow er back to the sy stem, the sy stem w ill be in "On" state.

IRQ [3-7, 9-15], NMIDisabled Disable this function.Enabled Enable this function. (Default v alue)

ModemRingOnDisabled Disable Modem Ring on function.Enabled Enable Modem Ring on function. (Default Value)

PME Event Wake UpDisabled Disable this function.Enabled Enable PME Ev ent Wake up. (Default Value)

Power On by KeyboardPassw ord Input passw ord (from 1 to 8 characters) and press Enter to set the Key board

Pow er On Passw ord.Any Key Set Key board pow er on by any key .Disabled Disable this function. (Default Value)

Power On by MouseEnabled Enable Pow er On by Mouse function.Disabled Disable this function. (Default Value)

Resume by AlarmYou can set "Resume by Alarm" item to enabled and key in Data/time to pow er on sy stem.

Disabled Disable this function. (Default Value)Enabled Enable alarm function to POWER ON sy stem.

If RTC Alarm Lead To Pow er On is Enabled.Month Alarm : NA, 1~12Day (of Month) : 0~31Time ( hh: mm: ss) : (0~23) : (0~59) : (0~59)


Engl

ish Power LED in S1 state

Blinking In standby mode(S1), pow er LED w ill blink. (Default Value)Dual/OFF In standby mode(S1):

a. If use single color LED, pow er LED w ill turn off.b. If use dual color LED, pow er LED w ill turn to another color.

PnP/PCI Configurations

PCI 1 IRQ AssignmentAuto Auto assign IRQ to PCI 1. (Default v alue)3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.

PCI 2 IRQ Assignment

Auto Auto assign IRQ to PCI 2. (Default v alue)3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.

PCI 3 IRQ AssignmentAuto Auto assign IRQ to PCI 3. (Default v alue)3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.

CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwarePnP/PCI Configurations

PCI 1 IRQ Assignment [Auto]PCI 2 IRQ Assignment [Auto]PCI 3 IRQ Assignment [Auto]


Item HelpMenu Level}

Device(s) using thisINT:

Display Cntrlr-Bus 1 Dev 0 Func 0

- 31 - BIOS Setup

English

PCI Health Status

Reset Case Open Status

Case Opened

If the case is closed, "Case Opened" w i ll show "No".If the case hav e been opened, "Case Opened" w ill show "Yes".If y ou w ant to reset "C ase Opened" v alue, set "Res et Case Open Status" to"Enabled" and sav e CMOS, y our computer w ill res tart.

Current Voltage (V ) VCORE / +3.3V / +5V / +12VDetect sy stem’s v oltage status automatically .

Current System/CPU TemperatureDetect Sy stem/CPU Temp. automatically .

Current CPU/SYSTEM FAN Speed (RPM)Detect CPU/SYSTEM Fan speed status automatically .

CPU Warning Temperature60°C / 140°F Monitor CPU Temp. at 60°C / 140°F.70°C / 158°F Monitor CPU Temp. at 70°C / 158°F.80°C / 176°F Monitor CPU Temp. at 80°C / 176°F.90°C / 194°F Monitor CPU Temp. at 90°C / 194°F.Disabled Disable this function.(Default v alue)

CPU FAN Fail WarningDisabled Fan Warning Function Disable. (Default v alue)Enabled Fan Warning Function Enable.

Reset Case Open Status [Disabled]Case Opened NoVCORE 1.71V+3.3V 3.29V+5V 4.99V

+12V 11.73VCurrent System Temperature 33° C/ 91° FCurrent CPU Temperature 27° C/ 80° FCurrent CPU FAN Speed 4821 RPMCurrent SYSTEM FAN Speed 0 RPM

CPU Warning Temperature [Disabled]CPU FAN Fail Warning [Disabled]SYSTEM FAN Fail Warning [Disabled]

CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwarePC Health Status


Item HelpMenu Level}


Engl

ish SYSTEM FAN Fail Warning

Disabled Fan Warning Function Disable. (Default v alue)Enabled Fan Warning Function Enable.

Frequency/Voltage Control

CPU Clock Ratio [10X]

Linear Frequency Control [Disabled]x CPU Clock (MHz) 100x DRAM Clock (MHz) AUTOx AGP Clock (MHz) AUTO

x PCI Clock (MHz) AUTO

CMOS Setup Utility-Copyright (C) 1984-2004 Award SoftwareFrequency/Voltage Control


Item Help

Menu Level u

CPU Clock RatioThis setup option w ill automatically as sign by C PU detec tion.For W illamette CPU:8X~23X default: 14XFor C -Steppin g P4:8X,10X~24X defaul t: 15XFor N orthwood CPU:12X~24X default: 16X

The option w il l display "Locked" and read only if the CPU ratio is not changeable.

Linear Frequency ControlDisabled Disable this function. (Default v alue)Enabled Enable this function.

CPU Clock100~355 Select CPU Clock to 100MHz~355MHz.

If y ou use FSB400 Pentium 4 processor, please set "CPU Clock" to 100MHz.If y ou use FSB533Pentium 4 processor, please set "CPU Clock" to 133MHz. If y ou use FSB800 Pentium 4processor, please set "CPU Clock" to 200MHz.Incorrect using it may cause y our sy stem broken. For pow er End-User use only !

DRAM Clock (MHz)Please set DRAM Clock according to y our requirement.

If y ou use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 200. If y ou use DDR333DRAM module, please set "DRAM Clock(MHz)" to 333.Incorrect using it may cause y our sy stem broken. For pow er End-User use only !

- 33 - BIOS Setup

English

AGP Clock (MHz)Please set AGP Clock according to y our requirement.

Incorrect using it may cause y our sy stem broken. For pow er End-User use only !

PCI Clock (MHz)Please set PCI Clock according to y our requirement.

Incorrect using it may cause y our sy stem broken. For pow er End-User use only !








} PC Health Status


Top Performance




Set User Password

Save & Exit Setup

Exit Without Saving



Time, Date, Hard Disk Type...







} PC Health Status


Top Performance




Set User Password

Save & Exit Setup

Exit Without Saving




Top Performance

Disabled.........................[n]Enabled..........................[ ]

hi: Move ENTER: AcceptESC: Abort

Top Performance

If y ou w ish to max imize the performance of y our sy stem, set "Top Per formance" as "Enabled".Disabled Disable this function. (Default Value)Enabled Enable Top Performance function.

"Top Per formance" w ill increase H/W w orking speed. Di fferent sy stem configuration (both H/Wcom ponent and OS) w ill effect the resul t. F or ex ample, the s ame H/W configuration might not runproperly w ith Window s XP, but w orks smoothly w ith Window s N T. Therefore, i f y our s y stem is notperform enough, the reliability or stability problem w ill appear sometimes, and w e w ill recommend y oudisabling the option to av oid the problem as mentioned abov e.

Fail -Safe defaults contain the mos t appropriate v alues of the sy stem parameters that a llow min imumsy stem perform ance.

Load Fail-Safe Defaults (Y/N)? N


Engl

ish







} PC Health Status


Top Performance




Set User Password

Save & Exit Setup

Exit Without Saving



Change/Set/Disable Password

Set Supervisor/User Password

When y ou select this function, the follow ing message w ill appear at the center of the screen to assist y ouin creating a pas sw ord.Ty pe the passw ord, up to eight c haracters, and pres s <Enter>. You w il l be ask ed to c onfi rm thepas sw ord. T y pe the pass w ord again and press <Enter>. You may also press <Es c> to abort theselec tion and not enter a pass w ord.To disable pass w ord, jus t press <Enter> w hen y ou are prompted to enter pass w ord. A mess age"PASSWORD DISABLED" w il l appear to confirm the pass w ord being disabled. Once the passw ord isdisabled, the sy stem w ill boot and y ou c an enter Setup freely .The BIOS Setup program allow s y ou to specify tw o separate passw ords:SUPERVISOR PASSWOR D and a USER PASSWORD. When disabled, any one m ay access al l BIOSSetup program function. When enabled, the Superv is or passw ord is required for enter ing the BIOSSetup program and hav ing full configuration fields, the User passw ord is required to access only basicitems.If y ou select "Sy stem" at "Passw ord Check" in Adv anc e BIOS Features Menu, y ou w i ll be promptedfor the passw ord ev ery time the sy stem is rebooted or any time y ou try to enter Setup Menu.If y ou select "Setup" at "Passw ord Check" in Adv ance BIOS Features Menu, y ou w ill be prompted onlyw hen y ou try to enter Setup.

Enter Password:

Load Optimized DefaultsCMOS Setup Utility-Copyright (C) 1984-2004 Award Software






} PC Health Status


Top Performance




Set User Password

Save & Exit Setup

Exit Without Saving




Selecting this field loads the factory defaults for BIOS and Chipset Features w hich the sy stem automaticallydetects.

Load Optimized Defaults (Y/N)? N

- 35 - BIOS Setup

English

Exit Without Saving

Ty pe "Y" w ill quit the Setup Uti lity w ithout sav ing to RTC CMOS.Ty pe "N" w ill return to Setup Uti lity .

Save & Exit SetupCMOS Setup Utility-Copyright (C) 1984-2004 Award Software






} PC Health Status


Top Performance




Set User Password

Save & Exit Setup

Exit Without Saving



Save Data to CMOS

Ty pe "Y" w ill quit the Setup Utility and sav e the user setup v alue to RTC CMOS.Ty pe "N" w ill return to Setup Uti lity .

Save to CMOS and EXIT (Y/N)? Y







} PC Health Status


Top Performance




Set User Password

Save & Exit Setup

Exit Without Saving



Abandon all Data

Quit Without Saving (Y/N)? N


Engl

ish Revision HistoryChapter 3 Install Drivers

Pictures below are shown in Windows XPInsert the driver CD-title that came with your motherboard into your CD-ROM drive, thedriver CD-title will auto start and show the installation guide. If not, please double click theCD-ROM device icon in "My computer", and execute the setup.exe.

INSTALL CHIPSET DRIVER

Install Drivers

This page shows the drivers that need to be installed for the system. Click each item to install thedriver manually or switch to the to install the drivers automatically.

Massage: Some device drivers will restart yoursystem automatically. After restarting yoursystem the "Xpress Install" will continue to installother drivers.

The "Xpress Install" uses the"Click and Go" technology to install the drivers automatically. Just selectthe drivers you want then click the "GO" button. The will execute the installation for youby itself.

We recommend that you install all components in the list.

Click "GO".

Driver Installation- 37 -

English

If your CD doesn't have SiS® USB2.0 driver, please download the USB2.0 driverfrom Microsoft® website (www.microsoft.com) for USB2.0 devices support.Please also note that Microsoft® USB2.0 driver is currently supported by WindowsXP and Windows 2000 only.Once we get the latest SiS® USB2.0 driver for Windows 98 and Windows ME, we willput the driver on GIGABYTE website asap. (http://www.gigabyte.com.tw).

Item Description

Driver install finished!! you have to rebootsystem!!

SiS 650/650GL/650GX/651 VGA DriverVGA driver for VGA integrated SiS 650/650GL/650GX/651chipset.USB Patch for WinXPThis patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.SiS PCI Lan Driver ( * )

SiS 962L/963L LAN driver.RealTek AC97 Audio DriverInstall RealTek AC97 audio driver.SIS USB 2.0 DriverIt is recommended that you use the Microsoft Windows update for the most updated driverfor XP/2K.

For USB2.0 driver support under Windows XP operating system, please use WindowsService Pack. After install Windows Service Pack, it will show a question mark "?" in"Universal Serial Bus controller" under "Device Manager". Please remove the question markand restart the system (System will auto-detect the right USB2.0 driver).

“*” For 8S651MP-RZ only.


Engl

ish

Driver Installation- 39 -

English


Engl

ish

TaiwanGigabyte Technology Co., Ltd.Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien,Taiwan, R.O.C.Tel: 886 (2) 8912-4888Fax: 886 (2) 8912-4004Tech. Support:http://tw.giga-byte.com/TechSupport/ServiceCenter.htmNon-Tech. Support (Sales/Marketing issues):http://ggts.gigabyte.com.tw/nontech.aspWebsite: http://www.gigabyte.com.tw

USAG.B.T. INC.Address: 17358 Railroad St, City of Industry, CA 91748.Tel: 1 (626) 854-9338Fax: 1 (626) 854-9339Tech. Support:http://www.giga-byte.com/TechSupport/ServiceCenter.htmNon-Tech. Support (Sales/Marketing issues):http://ggts.gigabyte.com.tw/nontech.aspWebsite: http://www.giga-byte.com

GermanyG.B.T. Technology Trading GmbHTel: 49-40-2533040 49-01803-428468 (Tech.)Fax: 49-40-25492343 (Sales) 49-01803-428329 (Tech.)Tech. Support:http://de.giga-byte.com/TechSupport/ServiceCenter.htmNon-Tech. Support (Sales/Marketing issues):http://ggts.gigabyte.com.tw/nontech.aspWebsite: http://www.gigabyte.de

JapanNippon Giga-Byte CorporationWebsite: http://www.gigabyte.co.jp

U.KG.B.T. TECH. CO. LTD.Tel: 44-1908-362700Fax: 44-1908-362709Tech. Support:http://uk.giga-byte.com/TechSupport/ServiceCenter.htmNon-Tech. Support (Sales/Marketing issues):http://ggts.gigabyte.com.tw/nontech.aspWebsite: http://uk.giga-byte.com

The NetherlandsGiga-Byte Technology B.V.Address: Verdunplein 8 5627 SZ, Eindhoven, The NetherlandsTel: +31 40 290 2088NL Tech.Support : 0900-GIGABYTE (0900-44422983, 0.2/M)BE Tech.Support : 0900-84034 ( 0.4/M)Fax: +31 40 290 2089Tech. Support:http://nz.giga-byte.com/TechSupport/ServiceCenter.htmNon-Tech. Support (Sales/Marketing issues):http://ggts.gigabyte.com.tw/nontech.aspWebsite: http://www.giga-byte.nl

ChinaNINGBO G.B.T. Tech. Trading CO., Ltd.Tech. Support:http://cn.giga-byte.com/TechSupport/ServiceCenter.htmNon-Tech. Support (Sales/Marketing issues):http://ggts.gigabyte.com.tw/nontech.aspWebsite: http://www.gigabyte.com.cnBeijingTel: 86-10-82856054, 86-10-82856064, 86-10-82856094Fax: 86-10-82856575ChengduTel: 86-28-85236930Fax: 86-28-85256822GuangZhouTel: 86-20-87586273Fax: 86-20-87544306ShanghaiTel: 86-21-64737410Fax: 86-21-64453227ShenyangTel: 86-24-23960918, 86-24-23960893WuhanTel: 86-27-87854385, 86-27-87854802Fax: 86-27-87854031XianTel: 86-29-5531943Fax: 86-29-5539821

Contact us via the information in this page all over the world.

CONTACT US

Motherboard Manual 8s651mp-Rz e

Documents