Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2013-01-01 to 2013-01-31 Register issued on : 2013-02-06 A list of subsectors can be found at the end of this document.
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Register issued on : 2013-02-06
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector A : SERVICES
Register issued on : 2013-02-06
Page 3Subsector A03: POSTAL SERVICES
Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181589/0001 Project EstablishedICS :National Ref : PR NF D 27-402Title : Letter boxes others than those with large opening - Indoor installations
Relatedness :National : New
Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181590/0001 Project EstablishedICS :National Ref : PR NF D 27-404Title : Letter boxes with large opening recommanded for dwelling places and covered by order
1802 of June 29, 1979 - Indoor installations
Relatedness :National : New
Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181591/0001 Project EstablishedICS :National Ref : PR NF D 27-405Title : Letter boxes with large opening recommanded for dwelling places and covered by order
1802 of June 29, 1979 - Outdoor installations
Relatedness :National : New
Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181592/0001 Project EstablishedICS :National Ref : PR NF D 27-407Title : Letter boxes with reduced capacity and with large opening for indoor installation -
Requirements and testing
Relatedness :National : New
Page 4
Subsector : A03 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181593/0001 Project EstablishedICS :National Ref : PR NF D 27-408Title : Letter boxes with reduced capacity and with large opening for outdoor installation -
Requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector A05: MAINTENANCE SERVICES
Subsector : A05 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 49040670/0001 Project EstablishedICS : 03.080.10National Ref : U49040670Title : Maintenance - Maintenance ratios for the group transportation fieldScope : The standard gives guidance to the group transportation field by road or by railways, for
the proper application of the ratios included in the UNI EN15341, enlarged, explained or simplified following the specific exigences.
Relatedness :National : REV/AMD UNI 11134:2005
Subsector : A05 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 49040700/0001 Project EstablishedICS : 01.040.01National Ref : U49040700Title : Maintenance - Specific terminology for the group transportation fieldScope : The standard gives guidance to the group transportation field by road or by railways, for
the proper application of the basic terminology. The basic terminology is enlarged, explained or simplified following the specific exigencies.
Relatedness :National : REV/AMD UNI 11802:2003
** End of Subsector **
Subsector A06: BUILDING AND CONSTRUCTION SERVICES
Subsector : A06 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025526/0001 Project EstablishedICS : 91.100.25National Ref : ÖNORM B 3200Title : Clay masonry elements - Requirements, tests, classification and marking -
Page 5
Title : Complementary provisions to ÖNORM EN 771-1Scope : The scope of this Austrian Standard covers all factory-made masonry bricks for load-
bearing masonry according to ÖNORM B 1996 (all Parts) and ÖNORM EN 1996 (all Parts) (EUROCODE 6) as well as all factory-made masonry bricks for non-load-bearing masonry according to ÖNORM B 3358-1 and -2, intended for production of masonry elements in building construction and civil engineering.
Relatedness :National : New
** End of Subsector **
Subsector A11: SAFETY AND SECURITY
Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91153/0001 Project EstablishedICS : 03.080.30, 39.040.01National Ref :Title : Competent services – Microprocessor Controlled Voltage Regulators – RulesScope : This standard includes microprocessor controlled voltage regulators competent services’
rules about technical equipment, operation management, structural situation and functions of staff
Relatedness :National : New
Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91155/0001 Project EstablishedICS : 03.080.30, 39.040.01National Ref :Title : Competent services – Satellite Based Positioning Equipments – RulesScope : This standard includes satellite based positioning equipments competent services’ rules
about technical equipment, operation management, structural situation and functions of staff
Relatedness :National : New
Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91224/0001 Project EstablishedICS : 03.080.30, 91.140.90National Ref :Title : Competent services – Rules for Control Panels or Control Boards used in Elevators,
Escalators and Passenger ConveyorsScope : This standard includes Control Panels or Control Boards used in Elevators, Escalators and
Passengers Conveyors competent services’ rules about technical equipment, operation management, structural situation and functions of staff
Page 6
Relatedness :National : New
Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91285/0001 Project EstablishedICS : 03.080.30, 29.120.70National Ref :Title : Competent services – Rules for Electronic and Electromagnetic Relays and Control
equipments (Temperature, Humidity, Speed, Counter, Axis)Scope : This standard includes Rules for Electronic and Electromagnetic Relays and Control
Equipments (Temperature, Humidity, Speed, Counter, Axis) competent services’ rules about technical equipment, operation management, structural situation and functions of staff
Relatedness :National : New
Subsector : A11 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst91286/0001 Project EstablishedICS : 03.080.30, 91.140.90National Ref :Title : Competent services – Rules for Control Panels or Control Boards used in Elevators,
Escalators and Passenger ConveyorsScope : This standard includes Control Panels or Control Boards used in Elevators, Escalators and
Passengers Conveyors competent services’ rules about technical equipment, operation management, structural situation and functions of staff
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : t1010836/0001 Project EstablishedICS : 03.080.30, 67.120.10National Ref :Title : Work places - Meat products manufacturing places - General rulesScope : This standard places of manufactured meat products, structural features, management,
employees, covers the general requirements on the features and technical equipment.
Relatedness :National : New
Subsector : A99 Registration Date : 2013-01-24Organization : TSE
Page 7
Country : TurkeyProject ID : t3008358/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places - Pest control in houses, work places and residential areas - General rules Scope : This standard, home, workplace and residential area pest (pest) will provide businesses
struggle with physical structure, technical equipment, management, and employees of the properties of the principles and procedures includes rules for spraying.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 8
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2013-02-06
Page 9Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2013-01-18Organization : SFS Draft Issue Date : 2012-12-14Country : Finland Latest Date for Comments : 2013-02-15Project ID : 0000E289/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of smoke control dampers in different
applications
Relatedness :National : New
Subsector : B01 Registration Date : 2013-01-18Organization : SFS Draft Issue Date : 2012-12-14Country : Finland Latest Date for Comments : 2013-02-15Project ID : 0000E290/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of smoke duct sections in different applications
Relatedness :National : New
Subsector : B01 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112228/0001 Project EstablishedICS : 13.220, 13.220.40National Ref : prEVS 620-6 Title : Fire safety - Textiles and textile productsScope : Standard specifies fields of application of textile furnishing materials for different room
functions, depending on burning behaviour classification of textile.
Relatedness :National : REV/AMD EVS 620-6:2003
Subsector : B01 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112229/0001 Project EstablishedICS : 13.220.50, 91.040.01, 91.140.30National Ref : prEVS 812-2 Title : Fire safety of constructions - Part 2: Ventilation systemsScope : Standard specifies fire safety requirements for design, construction and maintenance of
ventilation systems in buildings. Covered are ventilation systems for several fire-protection compartments and considered are existing Estonian construction norms experience and climatic situation.
Relatedness :National : REV/AMD EVS 812-2:2005
Page 10
Subsector : B01 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112230/0001 Project EstablishedICS : 13.220.01, 91.040.20National Ref : prEVS 812-5 Title : Fire safety of constructions. Part 5: Gas stations, fuel tanks and oil product storageScope : Standard provides the technical solution for design and installation stationary fuel
containers and tanks. Its specifies the distances between fuel containers and tanks and filling station fire fighting systems levels. The object of this standard is also to provide technical solutions for fuel terminals from the point of fire safety.
Relatedness :National : REV/AMD EVS 812-5:2005
Subsector : B01 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203927/0001 Project EstablishedICS :National Ref : BS 5446-3Title : Fire detection and fire alarm devices for dwellings. Specification for
smoke alarm kits for deaf and hard of hearing people
Relatedness :National : New
Subsector : B01 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 03100804/0001 Project EstablishedICS :National Ref : 03100804Title : Fire fighting and rescue service vehicles - Vehicles for roller containers - General
requirements
Relatedness :National : New
Subsector : B01 Registration Date : 2013-01-02Organization : NENCountry : NetherlandsProject ID : 50001795/0001 Project EstablishedICS : 13.220.50National Ref : NEN 6068:2012 Concept nlTitle : Determination of the resistance to fire movement between spacesScope : This standard gives a method for the determination of the resistance to fire movement
between spaces. This standard is applicable for the determination to fire movement between spaces in buildings.
Relatedness :National : New
Page 11** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025525/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1800Title : Determination of areas and volumes of buildingsScope : This Austrian Standard shall be applied jointly with ÖNORM EN 15221-6 for Determination
of areas and volumes of buildings. Case-specific and geometry-detailed issues have to be solved in accordance with the principles of this Standard.
Relatedness :National : New
Subsector : B02 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73009412/0001 Project EstablishedICS :National Ref :Title : Designing of roofs - Basic provisionsScope : The aim of the modification is unification of related Czech standards using new
information for designing of roofs
Relatedness :National : REV/AMD CSN 73 1901 (2011)
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2013-01-14Organization : LSTCountry : LithuaniaProject ID : 10001243/0001 Project EstablishedICS : 91.100.30National Ref :Title : Concrete. Test methods. Determination of frost resistance by one - sided freezingScope : This standard applies to normal concrete and concrete products with surface finishing (eg.
facades, retaining walls, caches, etc.) determination of frost resistance by one - sided freezing
Relatedness :National : New
Subsector : B03 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73006912/0001 Project EstablishedICS :
Page 12
National Ref :Title : Loading test of celular concrete building elementsScope : The aim of the revision is specification of loading test of celular concrete building elements
Relatedness :National : REV/AMD CSN 73 2034 (1986)
Subsector : B03 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73009712/0001 Project EstablishedICS :National Ref :Title : Concrete - Specification, performance, production and conformityScope : The aim of the modification is unification of National Annex on CSN EN 206-1 using new
information for specification, performance, production and conformity of concrete
Relatedness :National : REV/AMD CSN EN 206-1 (2001)
** End of Subsector **
Subsector B05: FIRE TESTS
Subsector : B05 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 34001612/0001 Project EstablishedICS :National Ref :Title : Fire protection and fire alarm systems - Guidelines for planning, gesign, installation,
commisioning, checks use and maintenanceScope : The aim of the modification is unification of related Czech Standards using of new
information for fire protection and fire alarm systems in buldings.
Relatedness :National : REV/AMD CSN 34 2710 (2011)
** End of Subsector **
Subsector B07: GLASS
Subsector : B07 Registration Date : 2013-01-22Organization : TSECountry : TurkeyProject ID : tst90633/0001 Project EstablishedICS : 81.040.30National Ref :Title : Evacuated tube solar collectors manufactured from borosilicate glass- Used for water
heating applicationsScope : This standard covers descriptions, classification , requirements for safety measures,
strength, and insulaton provided by convection and radiation heat transfer principles, inspections and tests for evacuated tube solar collectors(ETC), which were manufactured from borosilicate glass 3.3, used in water heating applications. It does not cover flat plate solar collectors (FPC). It also does not specify heat pipe- type ETCs used for other water
Page 13
Scope : and space heating applications.
Relatedness :National : New
** End of Subsector **
Subsector B08: DOORS AND WINDOWS
Subsector : B08 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025522/0001 Project EstablishedICS : 91.010.30, 91.060.50, 91.090National Ref : ÖNORM B 5320Title : Fitting for windows, door height windows and doors in external construction elements -
Principles for design, execution of work and materialScope : This Austrian Standard shall be applied to the design and execution for fitting of windows,
door height windows and external doors in conditioned and non-conditioned buildings or building parts being in direct contact to external climate. Furthermore, this Standard also applies to the fitting of windows between conditioned and non-conditioned rooms. Hereinafter, windows, door height windows and external doors will be shortly referred to as "windows. This Austrian Standard applies to new construction, rehabilitation as well as to the exchange of windows. The present ÖNORM neither covers repair and/or reconstruction of existing windows, nor works in the field of monument protection. Moreover, the present ÖNORM is not applicable to roof windows, roof lights, etc. For fire protection requirements, the applicability has to be checked for each specific case. This Standard does not deal with connection joints within coupled window constructions; these have to fulfil the requirements of ÖNORM B 5300.
Relatedness :National : New
Subsector : B08 Registration Date : 2013-01-28Organization : BSI Draft Issue Date : 2013-01-22Country : United Kingdom Latest Date for Comments : 2013-03-31Project ID : 01203920/0001 Draft for public enquiryICS :National Ref : BS 6375-3:2009+A1Title : Performance of windows and doors. Classification
for additional performance characteristics and guidance on selection and specification. Amendment
Relatedness :National : New
Subsector : B08 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203921/0001 Project EstablishedICS :National Ref : BS 8607
Page 14
Title : Mechanically operated digital locks. Requirements and test methods
Relatedness :National : New
** End of Subsector **
Subsector B09: THERMAL MATTERS
Subsector : B09 (Secondary Subsector)
Registration Date : 2013-01-22
Organization : TSECountry : TurkeyProject ID : tst90633/0001 Project EstablishedICS : 81.040.30National Ref :Title : Evacuated tube solar collectors manufactured from borosilicate glass- Used for water
heating applicationsScope : This standard covers descriptions, classification , requirements for safety measures,
strength, and insulaton provided by convection and radiation heat transfer principles, inspections and tests for evacuated tube solar collectors(ETC), which were manufactured from borosilicate glass 3.3, used in water heating applications. It does not cover flat plate solar collectors (FPC). It also does not specify heat pipe- type ETCs used for other water and space heating applications.
Relatedness :National : New
** End of Subsector **
Subsector B12: MASONRY
Subsector : B12 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181579/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-1Title : Building works - Small masonry unit walls - Part 1-1 : Technical specifications
Relatedness :National : New
Subsector : B12 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181580/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-2Title : Building works - Small masonry unit walls - Part 1-2 : General criteria for choice of
materials
Relatedness :
Page 15
National : New
Subsector : B12 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181581/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P2Title : Building works - Small masonry unit walls - Part 2 : Contract bill of special clauses
Relatedness :National : New
** End of Subsector **
Subsector B13: SOLAR ENERGY
Subsector : B13 (Secondary Subsector)
Registration Date : 2013-01-22
Organization : TSECountry : TurkeyProject ID : tst90633/0001 Project EstablishedICS : 81.040.30National Ref :Title : Evacuated tube solar collectors manufactured from borosilicate glass- Used for water
heating applicationsScope : This standard covers descriptions, classification , requirements for safety measures,
strength, and insulaton provided by convection and radiation heat transfer principles, inspections and tests for evacuated tube solar collectors(ETC), which were manufactured from borosilicate glass 3.3, used in water heating applications. It does not cover flat plate solar collectors (FPC). It also does not specify heat pipe- type ETCs used for other water and space heating applications.
Relatedness :National : New
** End of Subsector **
Subsector B14: GEOTECHNICS
Subsector : B14 Registration Date : 2013-01-04Organization : ISRM
Country :Former Yugoslav Republic of Macedonia
Project ID : 00042146/0001Project
EstablishedICS : 93.020National Ref : prМКС 1004:2012Title : Geotechnical investigation and testing – Field testing – Determination of bulk density -
Sand-Cone methodScope : This Macedonian standard describes the procedure for determination of soil bulk density
with Sand-Cone method in field conditions.Estimation of soil compaction and verification
Page 16
Scope : of density during execution of earthworks and construction civilengineering structures
Relatedness :National : New
Subsector : B14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA174709/0001 Project EstablishedICS :National Ref : PR NF P94-281Title : Geotechnical design - Retaining structures - Gravity walls
Relatedness :National : New
** End of Subsector **
Subsector B18: SCAFFOLDING
Subsector : B18 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203942/0001 Project EstablishedICS :National Ref : BS 1139-2.2:2009+A1Title : Metal scaffolding. Couplers. Aluminium couplers and special
couplers in steel. Requirements and test methods. Amendment
Relatedness :National : New
** End of Subsector **
Subsector B20: DRAINAGE EQUIPMENT
Subsector : B20 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025529/0001 Project EstablishedICS : 13.060.99National Ref : ÖNORM B 5101Title : Separator systems for light liquids (e.g. oil and petrol) - Supplementary requirements to
ÖNORMEN EN 858-1 and -2Scope : This standard includes additional requirements for ÖNORM EN 858-1 as well as the proof of
conformity of products according to ÖNORM EN 858-1 and -2, where fuel oil according to ISO 8217, named ISO-D-DMA (without addition of biogene substrates), is determined as testing fluid. This standard can be used for a maximum addition of 10 % (mass) of biogene components to fossil fuels. For higher percentages the performance of cleaning, the durability of materials and the necessity of manual shut-off valve after site has to be considered separately.
Relatedness :National : New
Page 17
Subsector : B20 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 11903607/0001 Project EstablishedICS : 23.040.50National Ref : DIN 4266-3Title : Drainage pipes for landfills - Part 3: Drainage pipes and fittings and their joints made
from concrete
Relatedness :National : New
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2013-01-04Organization : ISRM
Country :Former Yugoslav Republic of Macedonia
Project ID : 00042968/0002Draft for public
enquiryICS : 91.140.40National Ref : prМКС 1007:2012Title : Gas pipelines and fittings indication labelsScope : This standard specifies requirements for indication labels for gas pipelines and fittings.
Relatedness :National : New
Subsector : B25 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 01049470/0001 Project EstablishedICS : 91.140.40National Ref : E01049470Title : LPG plants for domestic use not fed by a distribution network - Design, installation,
service and maintenanceScope : This standard describes criteria for the design, installation, operation and maintenance of
LPG for domestic and similar use not fed by a distribution network, including the installation and replacement of LPG cylinders used in the users served. Such plants can be fed from a single LPG cylinder, by more LPG cylinders connected to each other, or by a deposit of LPG for domestic use.
Relatedness :National : REV/AMD UNI 7131:2009
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2013-01-10Organization : SNV Draft Issue Date : 2013-01-08Country : Switzerland Latest Date for Comments : 2013-02-15Project ID : CH130001/0001 Draft for public enquiry
Page 18
ICS : 93.020National Ref : SN 640492Title : Foundation layers of
asphalt concrete in cold construction; requirements to the mix, designing, execution requirements of the built-in layers
Relatedness :National : REV/AMD SN 640506a (1995)
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 87026620/0001 Project EstablishedICS : 91.060.20National Ref : U87026620Title : Criteria for design, execution, testing and maintenance of roof gardenScope : The standard establishes criteria for design, execution, testing and maintenance of roof
garden, in respect of environmental parameters, type of construction and intended use of a building. Requirements, classification criteria and functional layer are also specified. Materials and components commonly used according the current state of art are described.
Relatedness :National : REV/AMD UNI 11235:2007
Subsector : B27 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181584/0001 Project EstablishedICS :National Ref : PR NF DTU 52.2 P1-1-1/A1Title : Building works - Ceramics and similars tiles fixing with adhesives - natural stones - Part
1-1-1 : Contract bill of technical model clauses for inside walls
Relatedness :National : New
Subsector : B27 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : tst02810/0001 Project EstablishedICS : 91.100.50, 91.120.30National Ref :Title : Jointing materials for construction and expansion joints in concrete work – Rubber
waterstopsScope : This standard covers the general properties of rubber waterstops used as a jointing
materials for construction and expansion joints in concrete work
Relatedness :National : New
Page 19
International : Modified ASTM D 2240:2010
Subsector : B27 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : tst02810/0001 Project EstablishedICS : 91.100.50, 91.120.30National Ref :Title : Jointing materials for construction and expansion joints in concrete work – Rubber
waterstopsScope : This standard covers the general properties of rubber waterstops used as a jointing
materials for construction and expansion joints in concrete work
Relatedness :National : NewInternational : Modified ASTM D 395:2008
Subsector : B27 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : tst02810/0001 Project EstablishedICS : 91.100.50, 91.120.30National Ref :Title : Jointing materials for construction and expansion joints in concrete work – Rubber
waterstopsScope : This standard covers the general properties of rubber waterstops used as a jointing
materials for construction and expansion joints in concrete work
Relatedness :National : NewInternational : Modified ASTM D 412:2006
Subsector : B27 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : tst02810/0001 Project EstablishedICS : 91.100.50, 91.120.30National Ref :Title : Jointing materials for construction and expansion joints in concrete work – Rubber
waterstopsScope : This standard covers the general properties of rubber waterstops used as a jointing
materials for construction and expansion joints in concrete work
Relatedness :National : NewInternational : Modified ASTM D 573:2010
** End of Subsector **
Subsector B28: FLOOR COVERINGS
Subsector : B28 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181582/0001 Project EstablishedICS :National Ref : PR NF DTU 54.1 P1-2/A1
Page 20
Title : Building works - Cast in situ synthetic resin flooring - Part 1-2 : General criteria for selection of materials
Relatedness :National : New
** End of Subsector **
Subsector B30: FLOOR AND SURFACING
Subsector : B30 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181583/0001 Project EstablishedICS :National Ref : PR NF DTU 26.2 P1-1/A1Title : Building works - Screeds and slabs with a base of hydraulic binders - Part 2: Contract
bill of special administrative model clauses
Relatedness :National : New
Subsector : B30 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181782/0001 Project EstablishedICS :National Ref : PR NF P90-152Title : INFILL FOR SYNTHETIC TURF RESISTANCE TO WEARING INFILL FOR
SYNTHETIC TURF RESISTANCE TO WEARING INFILL FOR SYNTHETIC TURF RESISTANCE TO WEARING INFILL FOR SYNTHETIC TURF RESISTANCE TO WEARING
Relatedness :National : New
** End of Subsector **
Subsector B32: PRECAST CONCRETE PRODUCTS
Subsector : B32 Registration Date : 2013-01-08Organization : LSTCountry : LithuaniaProject ID : 10000911/0001 Project EstablishedICS : 91.100.30National Ref :Title : Foundation blocks – SpecificationsScope : 1.1 This standard is for solid foundation and basement wall units (hereinafter - blocks),
which are manufactured from normal and lightweight concrete conforming to LST EN 206-1 and LST 1974 requirements. 2.1 The blocks are used in the construction of buildings and underground basement walls. Blocks can be used for installation of foundation pad as well as for installing foundations in wet soils were the environment is non-aggressive. Under the latter conditions waterproof insulation shall be installed. When blocks are used in hostile environments, the requirements of LST EN 206-1 5.3 and of LST EN 13369 4.3.7 must be taken into account.
Page 21
Scope : 1.3 In terms of flammability blocks classified as "A" class do not necessitate to further test in accordance with LST EN 13369 4.3.4. 1.4 Detailed production drawings are to be prepared in accordance with applicable regulatory documents.
Relatedness :National : New
** End of Subsector **
Subsector B33: BUILDING DESIGN
Subsector : B33 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112250/0001 Project EstablishedICS : 91.010, 91.020National Ref : prEVS 865-2Title : Description of building design - Part 2: Design note of detailed designScope : The standard gives recommendations for drawing up design note for detailed design
documentation for a building, utility networks, site plan and landscape architecture
Relatedness :National : REV/AMD EVS 865-2:2006
Subsector : B33 Registration Date : 2013-01-18Organization : UNMZ Draft Issue Date : 2013-02-01Country : Czech Republic Latest Date for Comments : 2013-03-31Project ID : 73001512/0001 Draft for public enquiryICS :National Ref :Title : Security standard on the physical protection of critical infrastructure facilitiesScope : The aim of the standard is to give recommendations for the owners/operators concerning
design, reconstruction and refurbishment of critical infrastructures to eliminate or minimise the impacts of relevant threats and set optimum level in terms of physical protection of critical infrastructures.
Relatedness :National : New
Subsector : B33 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181570/0001 Project EstablishedICS :National Ref : PR NF P99-610Title : Furniture for street comfort and cleanness. Public seats. Rubustness and stability seats
Relatedness :National : New
** End of Subsector **
Page 22Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2013-01-18Organization : SFS Draft Issue Date : 2012-12-14Country : Finland Latest Date for Comments : 2013-02-28Project ID : 0000E288/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirements of windows and external pedestrian doorsets in
different applications
Relatedness :National : New
Subsector : B99 Registration Date : 2013-01-02Organization : NENCountry : NetherlandsProject ID : 50001794/0001 Project EstablishedICS : 03.080.30National Ref : NTA 8336:2012 nlTitle : Window cleaner register - Requirements and assessment proceduresScope : A national register for window cleaners will be developed. Individual window cleaners can
register themselves so it will be transparent where cleaning services are offered by whom. The specifications for this registers are given is this technical agreement.
Relatedness :National : New
Subsector : B99 Registration Date : 2013-01-10Organization : SNV Draft Issue Date : 2013-01-09Country : Switzerland Latest Date for Comments : 2013-02-22Project ID : CH130002/0001 Draft for public enquiryICS : 93.010National Ref : SN 671101Title : Terminals of the combined transport; Basics and design
Relatedness :National : New
Subsector : B99 Registration Date : 2013-01-25Organization : SNV Draft Issue Date : 2013-01-21Country : Switzerland Latest Date for Comments : 2013-03-06Project ID : CH130003/0001 Draft for public enquiryICS : 13.080.20National Ref : SN 670349Title : Tests on soils - oedometer test CRS (Constant Rate of Strain)
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 23
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2013-02-06
Page 24Subsector C01: Food products
Subsector : C01 Registration Date : 2013-01-03Organization : TSECountry : TurkeyProject ID : t1001070/0001 Project EstablishedICS : 67.120.10National Ref :Title : Turkish sucukScope : This standard specifies Turkish sucuk, it doesn't specify heat-treated sucuk.
Relatedness :National : New
Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t1003958/0001 Project EstablishedICS : 67.080.10National Ref :Title : Sour Cherry JamScope : This Standard comprises jams that are produced from cherry (Prunus cernausus L.), but
doesn’t comprise special cherry jam intended for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t1004186/0001 Project EstablishedICS : 67.080.10National Ref :Title : Strawberry JamScope : This Standard contains the jams manufactured by using fruit of strawberry (Fragaria vesca
L.) and does not contain special strawberry jam manufactured for diet.
Relatedness :National : New
Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t1012303/0001 Project EstablishedICS : 67.200.10National Ref :Title : Edible coconut oilScope : This standard covers only edible natural and refined coconul oil ıt does not cover the oil
which lost its edible propertly and esterified oils which changes the compositun of futly acids or consistency.
Relatedness :National : New
Page 25
Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t2008371/0001 Project EstablishedICS : 67.080.10National Ref :Title : Hazelnut PasteScope : This standard specifies hazelnut paste.
Relatedness :National : New
Subsector : C01 Registration Date : 2013-01-02Organization : TSECountry : TurkeyProject ID : t3002419/0001 Project EstablishedICS : 67.220.10National Ref :Title : Red pepper- Ground (Powdered)Scope : This standard , includes ground (powdered) red pepper.
Relatedness :National : New
Subsector : C01 Registration Date : 2013-01-03Organization : TSECountry : TurkeyProject ID : tst02540/0002 Project EstablishedICS : 67.120.30National Ref :Title : Frozen AnchoviesScope : This standard applies to frozen anchovies which is defined in clause 0.2.1.
Relatedness :National : New
Subsector : C01 Registration Date : 2013-01-03Organization : TSECountry : TurkeyProject ID : tst11860/0001 Project EstablishedICS : 67.100.30National Ref :Title : Whey PowderScope : This standard covers the whey powder.
Relatedness :National : New
** End of Subsector **
Page 26Subsector C02: PAINTS AND RELATED PRODUCTS
Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200796/0001 Project EstablishedICS :National Ref : 00200796Title : Paints and varnishes - Electro-deposition paints - Part 1: Terminology and general
principles
Relatedness :National : New
Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200797/0001 Project EstablishedICS :National Ref : 00200797Title : Paints and varnishes - Scratch test using a crockmeter
Relatedness :National : New
Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200799/0001 Project EstablishedICS :National Ref : 00200799Title : Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle
Relatedness :National : New
Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200800/0001 Project EstablishedICS :National Ref : 00200800Title : Paints and varnishes - Wettability - Part 7: Measurement of the contact angle ...
Relatedness :National : New
Subsector : C02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 00200801/0001 Project EstablishedICS :
Page 27
National Ref : 00200801Title : Determination of hydroxyl value - Part 3: High-spped method
Relatedness :National : New
Subsector : C02 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01300122/0001 Project EstablishedICS :National Ref : BS 6150:2006+A1Title : Painting of buildings. Code of practice. Amendment
Relatedness :National : New
** End of Subsector **
Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 06234120/0001 Project EstablishedICS :National Ref : 06234120Title : pH measurement - Measuring methods with potentiometric cells - Terms and definitions
Relatedness :National : New
** End of Subsector **
Subsector C06: ESSENTIAL OILS
Subsector : C06 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040655/0001 Project EstablishedICS :National Ref : PNE 84303Title : Essential oils. Essential oil of thyme containing thymol, Spanish type (Thymus zygis
(Loefl.) L.)Scope : This standard specifies certain characteristics of the Essential oil of Thyme containing
thymol, Spanish type (Thymus zygis (Loefl.), in order to facilitate assessment of its quality.
Relatedness :National : REV/AMD UNE 84303:2006, UNE 84303:2006 ERRATUM:2009
Page 28
Subsector : C06 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040656/0001 Project EstablishedICS :National Ref : PNE 84310Title : Essential oils. Essential oil of sage, Spanish (salvia lavandulifolia Vahl).Scope : This standard specifies certain characteristics of the Essential Oil of Sage, Spanish (Salvia
lavandulifolia Vahl), in order to facilitate assessment of its quality.
Relatedness :National : REV/AMD UNE 84310:2001
** End of Subsector **
** End of Sector **
Information procedure Page 29
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2013-02-06
Page 30Subsector F01: TECHNICAL DRAWINGS
Subsector : F01 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181588/0001 Project EstablishedICS :National Ref : PR XP E 04-007Title : Geometrical product specifications (GPS) - Discreet modal decomposition
Relatedness :National : New
** End of Subsector **
Subsector F05: MEASURING INSTRUMENTS
Subsector : F05 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01300123/0001 Project EstablishedICS :National Ref : BS 7898Title : Guide to hydrometric data management
Relatedness :National : New
** End of Subsector **
Subsector F08: SURFACES
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181586/0001 Project EstablishedICS :National Ref : PR NF E 03-110Title : Geometrical product specification (GPS) - Screw threads - Direct measuring methods
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181587/0001 Project EstablishedICS :National Ref : PR NF E 01-005Title : Mechanical products - Ecodesign methodology
Relatedness :National : New
Page 31
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181601/0001 Project EstablishedICS :National Ref : PR NF E 11-011Title : Length measuring instruments - Plain ring standard grauges
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181602/0001 Project EstablishedICS :National Ref : PR NF E 11-012Title : Length measuring instruments - Plain plug standard gauges and standard discs
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181603/0001 Project EstablishedICS :National Ref : PR NF E 11-019Title : Geometrical product specification (GPS) - Specific standards - Rules of design and
characteristics
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181604/0001 Project EstablishedICS :National Ref : PR NF E 11-101Title : Measuring instruments - Measuring plates
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181605/0001 Project EstablishedICS :National Ref : PR NF E 11-102
Page 32
Title : Measuring instruments - Vee blocks
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181606/0001 Project EstablishedICS :National Ref : PR NF E 11-104Title : Measuring instruments - Knife edge rules
Relatedness :National : New
Subsector : F08 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181607/0001 Project EstablishedICS :National Ref : PR NF E 11-107Title : Geometrical product specifications (GPS) - Metrological spheres
Relatedness :National : New
** End of Subsector **
Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES
Subsector : F14 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040621/0001 Project EstablishedICS :National Ref : PNE 54130-1Title : Visual corporative identity's manual. Part 1: Sections.Scope : This standard defines recommendations of visual corporative identity.
Relatedness :National : REV/AMD UNE 54130-1:2008
** End of Subsector **
Subsector F15: MATERIAL TESTING IN GENERAL
Subsector : F15 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 06234127/0001 Project EstablishedICS : 17.060National Ref : DIN 51366
Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of
Page 33
Title : the Cannon-Fenske viscometer for opaque liquids
Relatedness :National : New
** End of Subsector **
Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK
Subsector : F21 Registration Date : 2013-01-30Organization : EVSCountry : EstoniaProject ID : 00112522/0001 Project EstablishedICS : 03.060, 03.080, 91.040, 93.010National Ref : prEVS 875-10Title : Property valuation - Part 10: Inspection of Property and Data CollectionScope : The standard series EVS 875 applies to property valuation. These standards are to be used
for valuation activities and using valuations, especially for activities dealing with lending and financial reporting. The users of these standards are real estate specialists, construction specialists, environment specialists, financial reporting specialists (accountants, auditors), credit institutions, higher education institutions. These standards create a basis for unified approach to property valuation, satisfying the needs of private and public sector.
Relatedness :National : REV/AMD EVS 875-10:2008
** End of Subsector **
Subsector F99: UNDETERMINED
Subsector : F99 Registration Date : 2013-01-17Organization : UNMZ Draft Issue Date : 2013-02-28Country : Czech Republic Latest Date for Comments : 2013-04-30Project ID : 01000713/0001 Project EstablishedICS :National Ref :Title : Corporate social responsibility management system - RequirementsScope : The standard specifies requirements for the management system of social responsibility;
specifically incorporates management system requirements, requirements for individual CSR pillars (economic, environmental and social) and improvement requirements (in accordance with the PDCA cycle).
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 34
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2013-02-06
Page 35Subsector H06: HOROLOGY
Subsector : H06 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181487/0001 Project EstablishedICS :National Ref : PR NF S87-500Title : Horology - Time transmission from masterclock to secondary clocks by coded signals on
double-wound or wireless - Requirements
Relatedness :National : New
Subsector : H06 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181488/0001 Project EstablishedICS :National Ref : PR NF S81-550Title : Horology - Method for the inspection of the quality of quartz watches
Relatedness :National : New
** End of Subsector **
Subsector H09: FURNITURE
Subsector : H09 Registration Date : 2013-01-07Organization : UNICountry : ItalyProject ID : 40006170/0001 Project EstablishedICS : 97.140National Ref : U40006170Title : Surface finishings for wood and furniture - Determination of surface resistance to
temperature changesScope : The standard describes two methods for evaluating the effect of rapid temperature changes
on finished panels forming furniture elements. The scope is to assess any alteration of the surface under test and the possible interactions among the combination of two or more materials. The methods are suitable for both a comparison of panels with different coating systems and as a test to ensure that a given level of performance is maintained or achieved. The standard applies to furniture surfaces. The standard does not apply to surfaces made of leather, leather imitations, natural and synthetic fabrics.
Relatedness :National : REV/AMD UNI 9429:1989
Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181572/0001 Project EstablishedICS :
Page 36
National Ref : PR NF D60-001Title : Furniture - Terminology
Relatedness :National : New
Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181573/0001 Project EstablishedICS :National Ref : PR NF D60-002Title : Furniture - Rules for the presentation of the descriptive characteristics of furniture and
chairs
Relatedness :National : New
Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181575/0001 Project EstablishedICS :National Ref : PR NF D64-011Title : Domestic and contract furniture - Mattresses for children cos - Safety requirements and
test methods
Relatedness :National : New
Subsector : H09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181576/0001 Project EstablishedICS :National Ref : PR NF D61-060Title : Outside furniture. Seats. General characteristics. Tests. Requirements
Relatedness :National : New
Subsector : H09 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040704/0001 Project EstablishedICS :National Ref : PNE 56875Title : Kitchen furniture. Specifications, requirements, and test methods.Scope : This Standard establishes specifications, requirements and test methods (strength,
durability, surfacing materials, and physical) for kitchen furniture at two levels of use (intense and standard). Mechanical test and their corresponding requirements are based on EN 16122 and prEN 16121 standards. This standard is not applicable to kitchen furniture
Page 37
Scope : intended for use in collectivities.
Relatedness :
National :REV/AMD UNE 56841:2001, UNE 56842:2001, UNE 56843:2001, UNE 56842:2002 ERRATUM
European : Not Equivalent to EN 16122:2012
Subsector : H09 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040704/0001 Project EstablishedICS :National Ref : PNE 56875Title : Kitchen furniture. Specifications, requirements, and test methods.Scope : This Standard establishes specifications, requirements and test methods (strength,
durability, surfacing materials, and physical) for kitchen furniture at two levels of use (intense and standard). Mechanical test and their corresponding requirements are based on EN 16122 and prEN 16121 standards. This standard is not applicable to kitchen furniture intended for use in collectivities.
Relatedness :
National :REV/AMD UNE 56841:2001, UNE 56842:2001, UNE 56843:2001, UNE 56842:2002 ERRATUM
European : Not Equivalent to prEN 16121
** End of Subsector **
Subsector H14: CARAVANS
Subsector : H14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181780/0001 Project EstablishedICS :National Ref : NF S56-300Title : Caravans Elementary technical inspection without dismanting
Relatedness :National : New
Subsector : H14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181785/0001 Project EstablishedICS :National Ref : NF S 56-300Title : Caravans - Elementary technical inspection without dismanting
Relatedness :National : New
** End of Subsector **
Subsector H29: HEAT PUMPS
Page 38
Subsector : H29 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 0206D570/0001 Project EstablishedICS : 03.100National Ref : E0206D570Title : Heat pump geothermal systems - Requiremets for operators qualification of firms that
build geothermal exchangerScope : The Techincal Specification defines the knowledge, competence, formation and valuation
requirements for operators qualification of firms that build geothermal exchanger. In the standard "operators" are defined as both those who make the geothermal implant, those who take responsability for it and those who verify its correspondancy to standards and its functionality.
Relatedness :National : New
** End of Subsector **
Subsector H30: EQUIPMENT FOR CHILDREN
Subsector : H30 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181574/0001 Project EstablishedICS :National Ref : PR NF S54-045Title : Children's rest beds for domestic or collective use - Safety requirements and test
methods
Relatedness :National : New
** End of Subsector **
Subsector H31: DEDICATED LPG APPLIANCES
Subsector : H31 Registration Date : 2013-01-02Organization : NENCountry : NetherlandsProject ID : 50001707/0001 Project EstablishedICS : 23.020.30National Ref : NPR 2578:2007/A1:2011 Concept nlTitle : Management and maintenance of LPG, propane and butane installationsScope : This code of practice gives rules for the installation and use of LPG-installations in the
Netherlands in accordance with NEN-EN 12820. It concerns standard installations for the use or trade of LPG.
Relatedness :National : New
** End of Subsector **
Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)
Subsector : H33 Registration Date : 2013-01-25
Page 39
Organization : AFNORCountry : FranceProject ID : FA181489/0001 Project EstablishedICS :National Ref : PR NF S86-604Title : Horology - Characterization of metallic bracelets for watches
Relatedness :National : New
** End of Subsector **
Subsector H34: CHILD SAFETY
Subsector : H34 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181502/0001 Project EstablishedICS :National Ref : PR NF B51-001Title : Timber - Technical and chemical characteristics of timber
Relatedness :National : New
** End of Subsector **
Subsector H99: UNDETERMINED
Subsector : H99 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 04000307/0001 Project EstablishedICS :National Ref : 04000307Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part
14: Water supply connected drinking water disruption systems with cooling and CO2 enrichment
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 40
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2013-02-06
Page 41Subsector I01: SCREW THREADS
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Modified DIN 1816:1971
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Modified DIN 548:2006
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Modified DIN 6327-1:2004
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Modified DIN 6327-2:1985
Subsector : I01 Registration Date : 2013-01-11Organization : TSE
Page 42
Country : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Modified DIN 6327-3:1985
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Modified DIN 6327-4:1981
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04069/0002 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes Metric Scope : This standard covers nuts with holes metric
Relatedness :National : NewEuropean : Not Equivalent to DIN 547:2006
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04070/0002 Project EstablishedICS : 21.060.20National Ref :Title : Tommy Nuts Metric Scope : This standard covers tommy nuts, metric
Relatedness :National : NewEuropean : Modified DIN 6305:2002
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04070/0002 Project EstablishedICS : 21.060.20
Page 43
National Ref :Title : Tommy Nuts Metric Scope : This standard covers tommy nuts, metric
Relatedness :National : NewEuropean : Modified DIN 6307:2002
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04070/0002 Project EstablishedICS : 21.060.20National Ref :Title : Tommy Nuts Metric Scope : This standard covers tommy nuts, metric
Relatedness :National : NewEuropean : Modified DIN 80701:1991
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04071/0002 Project EstablishedICS : 21.060.20National Ref :Title : Slpotted Nuts, MetricScope : This standard covers slotted nuts mteric
Relatedness :National : NewEuropean : Modified DIN 1804:1971
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04071/0002 Project EstablishedICS : 21.060.20National Ref :Title : Slpotted Nuts, MetricScope : This standard covers slotted nuts mteric
Relatedness :National : NewEuropean : Modified DIN 546:1986
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04071/0002 Project EstablishedICS : 21.060.20National Ref :Title : Slpotted Nuts, MetricScope : This standard covers slotted nuts mteric
Page 44
Relatedness :National : NewEuropean : Modified DIN 981:1993
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04093/0002 Project EstablishedICS : 21.060.20National Ref :Title : Eye Nuts, Metric Scope : This standard covers eye nuts, metric
Relatedness :National : NewEuropean : Modified DIN 28129:1990
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04093/0002 Project EstablishedICS : 21.060.20National Ref :Title : Eye Nuts, Metric Scope : This standard covers eye nuts, metric
Relatedness :National : NewEuropean : Modified DIN 582:2010
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04093/0002 Project EstablishedICS : 21.060.20National Ref :Title : Eye Nuts, Metric Scope : This standard covers eye nuts, metric
Relatedness :National : NewEuropean : Modified DIN 80704:1968
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04094/0002 Project EstablishedICS : 21.060.20National Ref :Title : Knurled Nuts, Metric Scope : This standard covers knurled nuts metric
Relatedness :National : NewEuropean : Modified DIN 466:2006
Page 45
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04094/0002 Project EstablishedICS : 21.060.20National Ref :Title : Knurled Nuts, Metric Scope : This standard covers knurled nuts metric
Relatedness :National : NewEuropean : Modified DIN 467:2006
Subsector : I01 Registration Date : 2013-01-11Organization : TSECountry : TurkeyProject ID : tst04094/0002 Project EstablishedICS : 21.060.20National Ref :Title : Knurled Nuts, Metric Scope : This standard covers knurled nuts metric
Relatedness :National : NewEuropean : Modified DIN 6303:2006
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04096/0002 Project EstablishedICS : 21.060.20National Ref :Title : Octogonal Nuts, With Metric and Withworth ThreadScope : This standard covers octogonal nuts with metric and withword thread.
Relatedness :National : NewEuropean : Modified DIN 431:2000
Subsector : I01 Registration Date : 2013-01-24Organization : TSECountry : TurkeyProject ID : tst04096/0002 Project EstablishedICS : 21.060.20National Ref :Title : Octogonal Nuts, With Metric and Withworth ThreadScope : This standard covers octogonal nuts with metric and withword thread.
Relatedness :National : NewEuropean : Modified DIN 80705:1990
** End of Subsector **
Subsector I09: SMALL TOOLS
Page 46
Subsector : I09 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 12101999/0001 Project EstablishedICS :National Ref : 12101999Title : MQL processing technology - Part 4: Tapping chuck and tab/cold forming tab
Relatedness :National : New
** End of Subsector **
Subsector I13: GAS CONTAINERS
Subsector : I13 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 01600973/0001 Project EstablishedICS :National Ref : 01600973Title : Gas cylinder valves for cylinder test pressures up to 300 bar - Part 7: Gauges for
tapered thread W 31,3 × 1/14 (acetylene)
Relatedness :National : New
** End of Subsector **
Subsector I14: GEARS
Subsector : I14 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181639/0001 Project EstablishedICS :National Ref : PR NF E22-165Title : Spring retaining rings - Axially mounted circlips for shafts bores
Relatedness :National : New
** End of Subsector **
Subsector I16: INTERNAL COMBUSTION ENGINES
Subsector : I16 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181610/0001 Project EstablishedICS :National Ref : PR NF E37-503Title : Gas turbines - Procurement - Basic procurement information for combined-cycle plants
Relatedness :National : New
Page 47
** End of Subsector **
Subsector I19: NUCLEAR ENERGY
Subsector : I19 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025521/0001 Project EstablishedICS : 11.040.50National Ref : ÖNORM S 5276Title : Acceptance testing of gamma camerasScope : This ÖNORM is both the basis for the legally required acceptance testing and the basis for
the review of its supply agreement with the manufacturer. Since the determination of all parameters specified by NEMA is an extremely time-consuming task, in this ÖNORM a subset of measurements is defined that which can help in identifying significant problems. The purpose of this ÖNORM is to check the significant points provided by the manufacturer's specification in an abbreviated procedure. It is therefore essential for selected test positions, which are achieved with meaningful test equipment, carried out acceptance tests. If necessary, the tests according to NEMA are replaced by simplified custom procedures. Reference values specifying tolerance values for the following consistency checks arer set to ensure optimal image quality at low dose to the patient.
Relatedness :National : New
Subsector : I19 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181585/0001 Project EstablishedICS :National Ref : NF M60-780-2Title : Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part
2 : sampling of biological bioindicators from dulçaquicole environment.
Relatedness :National : New
** End of Subsector **
Subsector I31: VALVES
Subsector : I31 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040747/0001 Project EstablishedICS :National Ref : PNE 60713-1:2007/2MTitle : Stainless steel flexible hoses with connections for conduction of gaseous fuels up to a
pressure of 0,4 bar with a maximal length of 2 m. Part 1: Flexible hoses with stainless steel connections.
Scope : This standard aims to set the dimensions, technical and operating specifications, as well as testing to be met by stainless steel tubing with stainless steel fittings for joining reception facilities for fixed appliances that use gas as fuel.
Page 48
Relatedness :National : REV/AMD UNE 60713-1:2007, UNE 60713-1:2007/1M:2010
Subsector : I31 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040749/0001 Project EstablishedICS :National Ref : PNE 60719:2011/1MTitle : Fittings for hand operated metallic valves for installations using gaseous fuels.Scope : This standard establishes the dimensions of those fittings needed for the connection of
metallic valves and other elements of the gas receiving installations.
Relatedness :National : REV/AMD UNE 60719:2011
** End of Subsector **
Subsector I32: FLANGES
Subsector : I32 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181599/0001 Project EstablishedICS :National Ref : PR NF E29-260Title : Industrial pipes - Pipe components with PTFE - FEP - PFA - fluorocarbon resin
Relatedness :National : New
** End of Subsector **
Subsector I99: UNDETERMINED
Subsector : I99 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040750/0001 Project EstablishedICS :National Ref : PNE 60715-2Title : Metallic flexible hoses for connection of installations to burning appliances. Assemblies
of flexible connection with security socket and thread. Part 2: Continuous helicoidal corrugated stainless steel flexible connection assemblies.
Scope : This standard is to define the technical and performance characteristics and the tests to be fulfilled by the stainless steel flexible connections with safety plug, for connecting gas appliances to receiving facilities.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 49
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector M : METALLIC MATERIALS
Register issued on : 2013-02-06
Page 50Subsector M05: WELDING
Subsector : M05 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181600/0001 Project EstablishedICS :National Ref : PR NF A 89-422Title : Resistance welding - Method for the assessment of coated and uncoated weld bondes
sheet materials
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 51
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2013-02-06
Page 52Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2013-01-17Organization : TSECountry : TurkeyProject ID : tst01538/0001 Project EstablishedICS : 75.080National Ref :Title : Determination of the acidity of hydrocarbon liquids and distillation residues Scope : This standard specifies a test method for the determination of the acidity of hydrocarbon
liquids and distillation residues
Relatedness :National : NewInternational : Modified ASTM D 1093:2011
Subsector : N03 Registration Date : 2013-01-17Organization : TSECountry : TurkeyProject ID : tst01763/0001 Project EstablishedICS : 75.160.20National Ref :Title : Determination of napthalene hydrocarbons in aviation turbine fuels by ultraviolet
spectrophotometryScope : This standard specifies a test method for the determination of naphathalene hydrocarbons
by ultraviolet spectrometry.
Relatedness :National : NewInternational : Modified ASTM D 1840:2007
** End of Subsector **
Subsector N06: RUBBER
Subsector : N06 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181594/0001 Project EstablishedICS :National Ref : PR NF T 46-047Title : Rubber and rubber products - Determination of composition of vulcanizates and uncured
compounds by thermograrvimetry
Relatedness :National : New
** End of Subsector **
Subsector N07: SAWN TIMBER
Subsector : N07 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203945/0001 Project EstablishedICS :National Ref : BS 8605-1
Page 53
Title : External timber cladding. Specification
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181490/0001 Project EstablishedICS :National Ref : PR NF P21-220-1-1Title : Timber stairs with timber handrails - Part 1-1: Technical specifications
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181491/0001 Project EstablishedICS :National Ref : PR NF P21-220-1-2Title : Timber stairs with timber handrails - Part 1-2: General criteria for choice of materials
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181492/0001 Project EstablishedICS :National Ref : PR NF P21-220-2Title : Timber stairs with timber handrails - Part 2: Special clauses
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181499/0001 Project EstablishedICS :National Ref : PR NF X41-568Title : Wood preservatives - Laboratory method for obtaining samples for analysis to measure
losses by leaching into water or synthetic sea water
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25
Page 54
Organization : AFNORCountry : FranceProject ID : FA181501/0001 Project EstablishedICS :National Ref : PR NF B50-002Title : Wood - Vocabulary
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181507/0001 Project EstablishedICS :National Ref : PR NF B50-100-4Title : Durability of wood and wood- based products ? Definition of use classes - Part 4:
National declaration on the situation of biological agents
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181508/0001 Project EstablishedICS :National Ref : PR NF X41-542Title : Wood preservatives - Anti-termite treatment product for floors, walls, foundations, and
masonry work - Accelerated ageing test of treated materials prior of biological testing - Percolation test
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181509/0001 Project EstablishedICS :National Ref : PR NF X41-543-1Title : Wood preservatives - Determination of the efficacy of a bait-trap system - Part 1:
Efficacy of the insecticide formulation ? Laboratory method
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181510/0001 Project EstablishedICS :
Page 55
National Ref : PR NF X41-551Title : Termites - Determination of the effectiveness against termites of products or materials
used as barrier designed for ground and/or wall - Requirements for effectiveness
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181511/0001 Project EstablishedICS :National Ref : PR NF X41-550Title : Termites - Determination of the effectiveness against termites of products or materials
used as barrier designed for ground and/or wall - Laboratory method
Relatedness :National : New
Subsector : N07 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181512/0001 Project EstablishedICS :National Ref : PR NF X41-547Title : Wood preservatives - Determination of fongicide efficacy of temporary wood protectives
for green sawn timber - Laboratory method
Relatedness :National : New
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 Registration Date : 2013-01-04Organization : ISRM
Country :Former Yugoslav Republic of Macedonia
Project ID : 00043238/0001Draft for public
enquiryICS : 83.080National Ref : prМКС 1009:2012Title : Methods for the assessment of the oxo-biodegradation of plastics and of the phyto-
toxicity of the residues in controlled laboratory conditions Scope : The standard defines a testing scheme to characterize the behaviour of plastics when
exposed to photo-degradation or heat degradation. The two degradation mechanisms are also referred to as “oxo-degradation”.
Relatedness :National : New
** End of Subsector **
Subsector N11: WOOD-BASED PANELS
Page 56
Subsector : N11 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181686/0001 Project EstablishedICS :National Ref : PR NF B54-040/A1Title : Wood profiles for floor decking - Specifications
Relatedness :National : REV/AMD NF B54-040:201010 (B54-040)
** End of Subsector **
** End of Sector **
Information procedure Page 57
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2013-02-06
Page 58Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT
Subsector : S04 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01203943/0001 Project EstablishedICS :National Ref : BS 7985Title : Code of practice for the use of rope access for industrial purposes
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112248/0001 Project EstablishedICS : 13.060.30, 91.010.30National Ref : prEVS 847-3Title : Municipal water supply - Part 3: Design of water supply systemScope : The standard applies to water supply systems, regardless of their form of ownership, and is
intended for use with the public system, including pumping stations, and designing watertanks, pipes, pumps, and other auxiliary equipment dimensioning and selection. Standard is used in the construction of a new system and an existing public water supply system extensions and conversions. Standard accessories include informative, auxiliary materials recommended designers.
Relatedness :National : REV/AMD EVS 847-3:2003
Subsector : S09 Registration Date : 2013-01-21Organization : EVSCountry : EstoniaProject ID : 00112249/0001 Project EstablishedICS : 13.060.30, 91.010.30National Ref : prEVS 835Title : Design of site water supplyScope : This Standard applies to property water supply, which are connected to the city or town
public water supply system or the local water supply source. Property water supply system is defined with the inner plumbing of cold and hot water piping, water supply facilities, and underground water pipes within and out of the property until main valve. Standards must be followed in the design, installation, testing and re-construction of existing water supply systems.
Relatedness :National : REV/AMD EVS 835:2003
Subsector : S09 Registration Date : 2013-01-17Organization : DINCountry : Germany
Page 59
Project ID : 11903417/0001 Project EstablishedICS :National Ref : 11903417Title : German standard methods for the examination of water, waste water and sludge -
Jointly determinable substances (group F) - Part 43: Determination of selected easily volatile organic compounds in water - Method using gas chromatography (GC-MS) after headspace (HS-GC-MS) (F 43)
Relatedness :National : New
Subsector : S09 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 11903418/0001 Project EstablishedICS :National Ref : 11903418Title : German standard methods for the examination of water, waste water and sludge -
Jointly determinable substances (group F) - Part 35: Determination of selected neutral and alkaline plant treatment agents using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS) (F 36)
Relatedness :National : New
** End of Subsector **
Subsector S10: SURGICAL IMPLANTS
Subsector : S10 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181649/0001 Project EstablishedICS :National Ref : PR NF S94-057Title : Implants for surgery - Metallic materials - Forgeable and cold-formed cobalt-chromium-
nickel-molybdenum-iron alloy
Relatedness :National : New
Subsector : S10 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181764/0001 Project EstablishedICS :National Ref : NF S94-071Title : Materials for surgical implants - Determination of surface finish of coatings used for
biomedical applications
Relatedness :National : New
** End of Subsector **
Page 60Subsector S16: AIDS FOR THE DISABLED
Subsector : S16 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 42009630/0001 Project EstablishedICS : 11.180National Ref : U42009630Title : Mass-produced orthopedic footwear - Safety and performance requirements and test
methodsScope : This standard specifies safety and performance requirements and test methods of mass-
produced orthopedic footwear designed to accomodate an arch support.
Relatedness :National : New
** End of Subsector **
Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION
Subsector : S20 Registration Date : 2013-01-14Organization : ASICountry : AustriaProject ID : 00025528/0001 Project EstablishedICS : 91.010.99, 91.040.01National Ref : ÖNORM B 2131Title : Recycling-oriented deconstructionScope : These ÖNORM describes the necessary measures in planning and execution of a defined
recycling-oriented deconstruction and lays down the principles for the separation of the individual groups of materials and fractions determined in terms of recovery or disposal. The recovery-oriented deconstruction will be carried out in that way that the greatest possible utilization of the demolition materials can be made.
Relatedness :National : New
Subsector : S20 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 05100773/0001 Project EstablishedICS :National Ref : 05100773Title : Radio-frequency identification of waste containers by transponder technology using
frequencies below 135 kHz, text in German and English
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 61
Monthly Notifications Register
Notifications registered at CCMC from 2013-01-01 to 2013-01-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2013-02-06
Page 62Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040665/0001 Project EstablishedICS :National Ref : PNE 27007Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Welded steel bollardScope : This standard specifies the designs, sizes dimensions and technical requirements for welded
steel mooring bollards suitable for installation on sea-going vessels to meet normal mooring and towing requirements.
Relatedness :National : REV/AMD UNE 27007:1950International : Not Equivalent to ISO 13776:2012
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040666/0001 Project EstablishedICS :National Ref : PNE 27008Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Cruciform bollardScope : This standard specifies the designs, sizes dimensions and technical requirements for welded
steel mooring cruciform bollards, suitable for installation on sea-going vessels to meet normal mooring and towing requirements.
Relatedness :National : NewInternational : Not Equivalent to ISO 13797:2012
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040667/0001 Project EstablishedICS :National Ref : PNE 27009Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Steel rollersScope : This standard specifies the designs, sizes dimensions and technical requirements for steel
rollers for guide mooring ropes of ships.
Relatedness :
National :REV/AMD UNE 27009-1:1976, UNE 27009-2:1976, UNE 27009-3:1976, UNE 27009-4:1976, UNE 27009-5:1976, UNE 27009-6:1976, UNE 27009-7:1976
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040669/0001 Project EstablishedICS :National Ref : PNE 27011
Page 63
Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements: Single open fairlead
Scope : This Standard specifies the designs, sizes and technical requirements for single open fairleads suitable for installation on sea-going vessels to meet normal mooring requirements.
Relatedness :National : REV/AMD UNE 27011:1976
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040670/0001 Project EstablishedICS :National Ref : PNE 27012Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Double open fairleadScope : This Standard specifies the designs, sizes and technical requirements for double open
fairleads suitable for installation on sea-going vessels to meet normal mooring requirements.
Relatedness :National : New
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040675/0001 Project EstablishedICS :National Ref : PNE 27017Title : Civil shipbuilding and ship repairing Standardised components. Mooring elements:
CleatsScope : This standard specifies the design, sizes and technical requirements for mooring cleats
suitable for installation on sea-going vessels to meet mooring service normal requirements.
Relatedness :National : REV/AMD UNE 27017:1950
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040676/0001 Project EstablishedICS :National Ref : PNE 27021Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
ChocksScope : This standard specifies the designs, sizes and technical requirements for mooring chocks
suitable for installation on sea-going vessels to meet normal mooring and towing requirements.
Relatedness :National : REV/AMD UNE 27021:1950International : Not Equivalent to ISO 13713:2012
Page 64
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040677/0001 Project EstablishedICS :National Ref : PNE 27023Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Panama chocksScope : This Standard specifies the designs, sizes and technical requirements for panama type
chocks suitable for installation on sea-going vessels to meet normal mooring and towing requirements.
Relatedness :National : NewInternational : Not Equivalent to ISO 13728:2012
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040687/0001 Project EstablishedICS :National Ref : PNE 27025Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Pedestal fairleadScope : This standard specifies the designs, sizes and technical requirements for pedestal fairleads
used for guide of mooring rope suitable for installation on sea-going vessels to meet normal mooring requirements.
Relatedness :National : REV/AMD UNE 27025-1:1978International : Not Equivalent to ISO 13776:2012
Subsector : T01 Registration Date : 2013-01-02Organization : AENORCountry : SpainProject ID : P0040693/0001 Project EstablishedICS :National Ref : PNE 27026Title : Civil shipbuilding and ship repairing. Standardised components. Mooring elements:
Shipside roller fairleadsScope : This Standard specifies the designs, sizes and technical requirements for shipside roller
fairleads for guide mooring ropes of ships, suitable for installation on sea-going vessels to meet normal mooring requirements.
Relatedness :National : NewInternational : Not Equivalent to ISO 13767:2012
** End of Subsector **
Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2013-01-28Organization : BSICountry : United KingdomProject ID : 01300159/0001 Project EstablishedICS :
Page 65
National Ref : BS 4A 113:1999+A1:2012 CorrigendumTitle : Specification for cadmium-plated, mushroom-headed, unified-thread,slotted drive
bolts. Corrigendum
Relatedness :National : New
Subsector : T02 Registration Date : 2013-01-17Organization : DINCountry : GermanyProject ID : 13114982/0001 Project EstablishedICS :National Ref : 13114982Title : Aerospace; vented nickel-cadmium storage batteries, 24 V 15 Ah; Inactive for new
design
Relatedness :National : New
** End of Subsector **
Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT
Subsector : T09 Registration Date : 2013-01-25Organization : AFNORCountry : FranceProject ID : FA181609/0001 Project EstablishedICS :National Ref : PR NF E24-404Title : Belt drives - V-ribbed belts - Determinationof measurement of pitch, angle and cord
position
Relatedness :National : New
** End of Subsector **
Subsector T14: PACKAGING
Subsector : T14 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 40006141/0001 Project EstablishedICS : 55.160National Ref : U40006141Title : Wood packages for bulk capacity over 300 kg - Part 1: Terms and definitionsScope : This standard establishes the terms and the definitions relating to the construction
elements and to the construction and operating methods of wood packages for bulk capacity over 300 kg.
Relatedness :National : REV/AMD UNI 9151-1:1998
Page 66
Subsector : T14 Registration Date : 2013-01-29Organization : UNICountry : ItalyProject ID : 40006142/0001 Project EstablishedICS : 55.160National Ref : U40006142Title : Wood packages