Monitor / TV-Lift Ket-Screen Lift S 4701 Description Cost-efficient, compact lifting system for screens up to 24” and weights up to 25 kg. Special features ▪ High lifting speed ▪ Simple installation for different assembly situations ▪ Can be supplied with any stroke up to 750 mm ▪ Very low noise level allows applications in noise sensitive areas ▪ With integrated motor cable (1.2 m), see also pin assignment Variant key Stroke: XXXX in mm Design: X 03: Version „Standard“ Fixing of the plate according to VESA 05: Version „Short“ Fixing of the plate according to VESA 07: Version „Basic“ Fixing on the runner 4701.00- V 0X H XXXX Technical notes ▪ Safety instructions Please take attention to crushing points when installing in a housing. ▪ Attention: In case of repair the TV lift unit must always be returned together with the control unit Technical data Ket-Screen Lift Small Standard Short Basic Stroke customer specification max. 750 mm customer specification max. 750 mm customer specification max. 750 mm Retracted length Stroke+219 mm Stroke+157 mm Stroke+215 mm Maximum load 250 N 250 N 250 N Maximum screen size 24” 24” 24” Movement speed 90 mm/s 90 mm/s 90 mm/s Item number 4701.00-V03HXXXX 4701.00-V05HXXXX 4701.00-V07HXXXX Control box Compact-3 ▪ Controlled via manual switch ▪ Connection for anti-pinch system ▪ Dimensions: 264 x 103 x 37 mm Item number: 1000.49-V98HXXXX for mains voltage 230 V Item number: 1000.49-V99HXXXX for mains voltage 110 V Power cable 3143.53-28 with 3-pin Schuko - Europe 3143.53-28 mit 3-pin plug - USA Further power cables on the „Compact Controller“ page in the „Accessories“ chapter RF remote control ▪ Consisting of, RF reseiver, remote control (including battery) and manual Item number: 3143.47-0001 Optional Up/down Handset HSM-OD-2-LD ▪ Handset with up-down function Item number: 3143.47-30 Other switches on the page „Manual switches and Motor cable“ in chapter „Accessories“ Optional: Additional mounting plate incl. screws for mounting of the push rods Attention: The screws need to be se- cured with thread lock fluid! Item number: 4701.35-0007 1 2 3 4 5 6 7 8 Pin assignment 4. Motor black - 8. Motor blue + 2. Hall sensor red +5V 1. Hall sensor violet, output 1 3, 7. Hall sensor black - 5. Hall sensor green, output 2 www.ketterer.de 1 2 4701.75-06/20200407 Optional: Adjustment screw 2 pieces incl. nut adjustment range: Standard/Basic - 19 mm Short - 75 mm Item number: 4701.51-0001 Lifting Systems Table / Screen