BY54711 - BY54718 Monday, July 10, 2017 Sample ID#s: Attn: Mr. Chris Doyle Solitude Lake Management 580 Rockport Rd Hackettstown, NJ 07840 Project ID: CROTON RIVER Sincerely yours, Laboratory Director Phyllis Shiller If you have any questions concerning this testing, please do not hesitate to contact Phoenix Client Services at ext. 200. NELAC - #NY11301 CT Lab Registration #PH-0618 MA Lab Registration #MA-CT-007 ME Lab Registration #CT-007 NH Lab Registration #213693-A,B NJ Lab Registration #CT-003 NY Lab Registration #11301 PA Lab Registration #68-03530 RI Lab Registration #63 VT Lab Registration #VT11301 This laboratory is in compliance with the NELAC requirements of procedures used except where indicated. This report contains results for the parameters tested, under the sampling conditions described on the Chain Of Custody, as received by the laboratory. This report is incomplete unless all pages indicated in the pagination at the bottom of the page are included. A scanned version of the COC form accompanies the analytical report and is an exact duplicate of the original. 587 East Middle Turnpike, P.O. Box 370, Manchester, CT 06040 Telephone (860) 645-1102 Fax (860) 645-0823 Page 1 of 22
22
Embed
Monday, July 10, 2017 Hackettstown, NJ 07840 Project ID ...Hackettstown, NJ 07840 Project ID: CROTON RIVER Sincerely yours, Laboratory Director Phyllis Shiller If you have any questions
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BY54711 - BY54718
Monday, July 10, 2017
Sample ID#s:
Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
Project ID: CROTON RIVER
Sincerely yours,
Laboratory DirectorPhyllis Shiller
If you have any questions concerning this testing, please do not hesitate to contact Phoenix Client Services at ext. 200.
This laboratory is in compliance with the NELAC requirements of procedures used except where indicated.
This report contains results for the parameters tested, under the sampling conditions described on the Chain Of Custody, as received by the laboratory. This report is incomplete unless all pages indicated in the pagination at the bottom of the page are included.
A scanned version of the COC form accompanies the analytical report and is an exact duplicate of the original.
QA/QC Surrogates85% 1,3-Dimethyl-2-nitrobenzene 07/08/17 MH 70 - 130 %%1 NA NANA89% benzo(a)pyrene-d12 07/08/17 MH 70 - 130 %%1 NA NANA
103% Triphenylphosphate 07/08/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 2 of 22
DW1-APhoenix I.D.: BY54711
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 3 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
DW1-B
Phoenix ID: BY54712
07/07/1712:3417:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates86% 1,3-Dimethyl-2-nitrobenzene 07/08/17 MH 70 - 130 %%1 NA NANA83% benzo(a)pyrene-d12 07/08/17 MH 70 - 130 %%1 NA NANA87% Triphenylphosphate 07/08/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 4 of 22
DW1-BPhoenix I.D.: BY54712
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 5 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
DW3-A
Phoenix ID: BY54713
07/07/1712:4017:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates88% 1,3-Dimethyl-2-nitrobenzene 07/08/17 MH 70 - 130 %%1 NA NANA93% benzo(a)pyrene-d12 07/08/17 MH 70 - 130 %%1 NA NANA
100% Triphenylphosphate 07/08/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 6 of 22
DW3-APhoenix I.D.: BY54713
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 7 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
DW3-B
Phoenix ID: BY54714
07/07/1712:4017:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates84% 1,3-Dimethyl-2-nitrobenzene 07/08/17 MH 70 - 130 %%1 NA NANA87% benzo(a)pyrene-d12 07/08/17 MH 70 - 130 %%1 NA NANA88% Triphenylphosphate 07/08/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 8 of 22
DW3-BPhoenix I.D.: BY54714
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 9 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
DW4-A
Phoenix ID: BY54715
07/07/1713:0117:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates83% 1,3-Dimethyl-2-nitrobenzene 07/08/17 MH 70 - 130 %%1 NA NANA87% benzo(a)pyrene-d12 07/08/17 MH 70 - 130 %%1 NA NANA90% Triphenylphosphate 07/08/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 10 of 22
DW4-APhoenix I.D.: BY54715
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 11 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
DW4-B
Phoenix ID: BY54716
07/07/1713:0117:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates83% 1,3-Dimethyl-2-nitrobenzene 07/08/17 MH 70 - 130 %%1 NA NANA87% benzo(a)pyrene-d12 07/08/17 MH 70 - 130 %%1 NA NANA93% Triphenylphosphate 07/08/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 12 of 22
DW4-BPhoenix I.D.: BY54716
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 13 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
FW1-A
Phoenix ID: BY54717
07/07/1712:2617:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates89% 1,3-Dimethyl-2-nitrobenzene 07/09/17 MH 70 - 130 %%1 NA NANA86% benzo(a)pyrene-d12 07/09/17 MH 70 - 130 %%1 NA NANA93% Triphenylphosphate 07/09/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 14 of 22
FW1-APhoenix I.D.: BY54717
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Ver 1
Page 15 of 22
Sample Information Custody InformationMatrix:Location Code:Rush Request:P.O.#:
Collected by:Received by:Analyzed by:
DRINKING WATERSOLITUDE24 Hour
07/07/17LBsee "By" below
CD
Laboratory Data
FW1-B
Phoenix ID: BY54718
07/07/1712:2617:20
Parameter ResultRL/PQL Units Date/Time By Reference
FOR: Attn: Mr. Chris DoyleSolitude Lake Management580 Rockport RdHackettstown, NJ 07840
QA/QC Surrogates76% 1,3-Dimethyl-2-nitrobenzene 07/09/17 MH 70 - 130 %%1 NA NANA73% benzo(a)pyrene-d12 07/09/17 MH 70 - 130 %%1 NA NANA80% Triphenylphosphate 07/09/17 MH 70 - 130 %%1 NA NANA
Ver 1
Page 16 of 22
FW1-BPhoenix I.D.: BY54718
Client ID:CROTON RIVERProject ID:
Parameter ResultRL/PQL Units Date/Time By ReferenceDIL MCL MCLGAL
Comments:
Maximum Contaminant Level (MCL) (Lower of): 40 CFR Part 141; Public Health Law, Section 225 Part 5. The highest level of a contaminant that is allowed in drinking water. MCLs are enforceable standards.
Action Level (AL): (Lower of): 40 CFR Part 141.80; Public Health Law, Section 225 Part 5.
Secondary DW Maximum Contaminant Level Goal (MCLG): (Lower of): 40 CFR Part 141; 40 CFR Part 143. The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs are non-enforceable public health goals.
Phyllis Shiller, Laboratory DirectorJuly 10, 2017
If there are any questions regarding this data, please call Phoenix Client Services.This report must not be reproduced except in full as defined by the attached chain of custody.
Reviewed and Released by: Bobbi Aloisa, Vice President
RL/PQL=Reporting/Practical Quantitation Level DIL=Dilution (analysis required diluting to evaluate) ND=Not DetectedBRL=Below Reporting Level (less than the reporting level, the lowest amount the laboratory can detect and report.)AL = Action Level MCL = Maximum Contaminant Level MCLG = Maximum Contaminant Level GoalQA/QC Surrogates: Surrogates are compounds (preceeded with a %) added by the lab to determine analysis efficiency. Surrogate results(%) listed in the report are not "detected" compounds.
Phoenix Laboratories does not assume responsibility for the data contained in this report. It is provided as an additional tool to identify requested criteria exceedences. All efforts are made to ensure the accuracy of the data (obtained from appropriate agencies). A lack of exceedence information does not necessarily suggest conformance to the criteria. It is ultimately the site professional's responsibility to determine appropriate compliance.