Molykote (R) in India from Project Sales Corp SMS +91-98851-49412

7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412

1/338

PASTES

THREAD PASTES/ANTI-SEIZEMolykote 1000

Molykote HSC PlusMolykote P-37Molykote P-74ASSEMBLY PASTES

Molykote DMolykote G-n PlusMolykote G-Rapid PlusMolykote M-77

GREASE PASTES

Molykote Cu-7439 PlusMolykote DXMolykote EMolykote P-40Molykote P-1900Molykote TP-42

GREASES

MINERAL OIL GREASESMolykote 1102

Molykote 1122Molykote 165 LTMolykote BR2 PlusMolykote FB 180Molykote G-0010 Bearing GreaseMolykote G-0052FG EP White Food GradeMolykote G-67

Molykote Longterm 00Molykote Longterm 2 plusMolykote Longterm W2

SEMI-SYNTHETIC GREASESMolykote PG-75SYNTHETIC GREASES, PAO

Molykote EM-30LMolykote EM-50LMolykote EM-60LMolykote G-4500

Molykote G-4700Molykote YM-103

SYNTHETIC GREASES, POEMolykote BG-20SYNTHETIC GREASES, FLUROSILICONEMolykote FS 1292Molykote FS 3451Molykote FS 3452

SYNTHETIC GREASES, PFPEMolykote HP-300Molykote HP-870

SYNTHETIC GREASES, SILICONE

Molykote 33 LightMolykote 33 MediumMolykote 41Molykote 44 Light

Molykote 44 MediumMolykote 55MDow Corning High Vacuum Grease

Molykote PG-21Molykote PG-54COMPOUNDSMolykote 111 Compound

Dow Corning 4 CompoundDow Corning 7 CompoundDow Corning 340 Heat Sink Compound

HIGH PERFORMANCE INDUSTRIAL

LUBRICATING OIL S

MULTI-PURPOSE GEAR OILS

Molykote L-0532FGMolykote L-1122Molykote L-1132Molykote L-1122FGMolykote L-1146FG

CHAIN OILS

Molykote L-1428Molykote L-1468FG

Molykote CO 220Molykote C40 High Temp LubricantMolykote OmniglissMolykote MKL-N

COMPRESSOR OILSMolykote L-4640 ( Flush oil )Molykote L-4646 ( POE )

COATINGSANTI-FRICITON COATINGSMolykote 106

Molykote D-321RMolykote 3400A LeadfreeMolykote 3402CMolykote 7400Molykote 7405Molykote 7409Molykote D-10

Molykote PTFE-N UVOTHER COATINGS

Molykote Metal Protector PlusSOLVENTSMolykote 7414

DISPERSIONSMolykote M-55 PlusMolykote Multigliss

OTHER PRODUCTSMolykote Food Grade Spray OilMolykote Supergliss

Molykote 316 Silicone Release SprayDow Corning 557 Silicone SprayMolykote S-1011POWDERSMolykote MicrosizeMolykote Z


2/338

MOLYKOTE Omnigliss Spray

Quick-action penetrating agent

Specialty

Lubricants

Product Information

TYPICAL PROPERTIES

Specification writers: These values are not intended for use in preparing specifications.Please contact your local Dow Corning sales representative prior to writing specificationson this product.

Test

Quick-action penetrating agent incorporating corrosion

protection, water-repellent and lubricating properties

Standard Unit Result

APPLICATIONS

Suitable for frictional contacts, running at low to medium speeds, which are

not equipped with grease nipples or oiling holes.

Used on joints, levers, chains and other components of transport and conveyor

equipment, textile machinery, automatic filling units and all types of packaging

equipment.

Color Light amber

Density

Density at 20C 0.84g/ml

Viscosity at 40C 11.8mm/s

TemperatureService temperature -30 to +80C

Load-carrying capacity, wear protection, service life

Four-ball tester (VKA)

Weld load 2900NDIN 51 350 pt.4

Weld scar under 800N load 1.1mm

FEATURES

Good penetration

Water repellent

High pressure resistance

Temporary corrosion protection

COMPOSITIONMineral oil

Solid lubricants

Corrosion inhibitors

Stabilizer

HOW TO USE

How to apply

Shake before use. Can be applied with

brush, oil can, spray-can, hand-held or

compressed-air spraying equipment,or by dipping. On badly corroded

parts, allow longer to react. Repeat if

necessary.

HANDLING PRECAUTIONS

PRODUCT SAFETY

INFORMATION REQUIRED FOR

SAFE USE IS NOT INCLUDED.

BEFORE HANDLING, READ

PRODUCT AND SAFETY DATA

SHEETS AND CONTAINER

LABELS FOR SAFE USE,

PHYSICAL AND HEALTH

HAZARD INFORMATION. THE

SAFETY DATA SHEET IS

AVAILABLE FROM YOUR LOCAL

DOW CORNING SALES

REPRESENTATIVE.

USABLE LIFE ANDSTORAGE

When stored at or below 20C in the

original unopened containers, this

product has a usable life of 60 months

from the date of production.

PACKAGING

This product is available in different

standard container sizes. Detailed

container size information should be

obtained from your nearest

Dow Corning sales office orDow Corning distributor.


3/338

LIMITATIONS

This product is neither tested nor

represented as suitable for medical or

pharmaceutical uses.

HEALTH AND

ENVIRONMENTAL

INFORMATIONTo support customers in their product

safety needs, Dow Corning has an

extensive Product Stewardship

organization and a team of Health,

Environment and Regulatory Affairs

specialists available in each area.

For further information, please

consult your local Dow Corning

representative.

WARRANTYINFORMATION - PLEASE

READ CAREFULLY

The information contained herein is

offered in good faith and is believed

to be accurate. However, because

conditions and methods of use of our

products are beyond our control, this

information should not be used in

substitution for customer's tests to

ensure that Dow Corning's products

are safe, effective, and fully

satisfactory for the intended end use.Dow Corning's sole warranty is that

the product will meet the

Dow Corning sales specifications in

effect at the time of shipment. Your

exclusive remedy for breach of such

warranty is limited to refund of

purchase price or replacement of any

product shown to be other than as

warranted. Dow Corning specifically

disclaims any other express or implied

warranty of fitness for a particular

purpose or merchantability. Unless

Dow Corning provides you with aspecific, duly signed endorsement of

fitness for use, Dow Corning

disclaims liability for any incidental

or consequential damages.

Suggestions of use shall not be taken

as inducements to infringe any patent.

1997-2001 Dow Corning Corporation. All rights reserved.

05/01/1998

DC 3630Ref. no. 71-0173A-01

2 MOLYKOTE is a registered trademark of Dow Corning Corporation.


4/338

MOLYKOTE 106

Anti-friction Coating

Specialty

Lubricants

Product Information

TYPICAL PROPERTIES


Test

Heat-curing dry lubricant

Standard* Unit Result

APPLICATIONS

For smooth coating of metal/metal combinations.

Maintenance-free, permanent lubrication of highly stressed friction

combinations with low speeds or oscillating operation.

Used where design construction prevents the use of oil or grease or where therisk of soiling is undesirable.

This product is used successfully for the dry lubrication of locks, hinges, joints,

magnetic armatures and for the anti-seizure coating of engine and gear

components.

Color Dark grey

Physical propertiesViscosity at 20C (DIN3 cup) 42sDIN 53211/3

Density at 20C 1.16g/mlDIN 53217/2

Non-volatile content 41%CTM 0242 I

Temperature

Curing time 60/150minutes/C

Curing time 30/180minutes/C

Service temperature range -70 to +250C


Falex load-carrying capacity p=13600*

s=11300*

NASTM-D2625

LFW-1, rotating p=187*ASTM-D2714F=2860N, n=72 minutes,v=7.9m/minutes

no. of revolutions x1000 to =0.1

LFW-1, oscillating p=409*ASTM-D2714

F=900N, frequency=89.5osc./minutes

no. of oscillations to =0.08

Corrosion protection

Salt spray test 2hISO/R 1456

1. * Surface:p = phosphatized, s = sand-blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm

FEATURES

Low coefficient of friction

High load carrying capacity

Protection from corrosion

Good adhesion

Can be painted over

COMPOSITION

Solid lubricants

Organic binder

Solvent


5/338

HOW TO USE

Surface preparation

First clean and degrease the surface

which will be coated with

MOLYKOTE 106 Anti-Friction

Coating. Phosphatization or

sandblasting (180 grid) increases theadhesion and service life.

How to apply

Stir the Anti-friction Coating

thoroughly before applying by

spraying, dipping, centrifuging or

brushing. Recommended dry film

thickness: 5 to 20m.

Curing

60 minutes at 150C,

30 minutes at 180C

(Object temperature).

Solubility

Thinning can be carried out using

MOLYKOTE L 13 Thinner.


PRODUCT SAFETY







PHYSICAL AND HEALTH




DOW CORNING SALES

REPRESENTATIVE.

USABLE LIFE AND

STORAGE

When stored at or below 20C in theoriginal unopened containers,

MOLYKOTE 106 Anti-Friction

Coating has a usable life of 36 months


PACKAGING





Dow Corning sales office or

Dow Corning distributor.

LIMITATIONS




HEALTH AND

ENVIRONMENTAL

INFORMATIONTo support customers in their product








representative.


READ CAREFULLY










satisfactory for the intended end use.Dow Corning's sole warranty is that












Dow Corning provides you with aspecific, duly signed endorsement of







19/11/1998

DC 2935Ref. no. 71-0154B-01



6/338

MOLYKOTE 1102

Grease

Specialty

Lubricants

Product Information

TYPICAL PROPERTIES

Specification writers: These values are not intended for use in preparing specifications.

Please contact your local Dow Corning sales representative prior to writing specificationson this product.

Test

For gas taps and cocks with metal, glass and plastic

combinations


APPLICATIONS

Used successfully with natural gas stop-cocks of main and secondary lines in

domestic equipment, instantaneous water heaters and similar equipment.

Lubrication of smaller taps made of metal, glass or plastic.

Color Black

Consistency, density, viscosity

Consistency class, NLGI ca. 3DIN 51 818

Worked penetration 205-240mm/10ISO 2137

Density at 20C 0.96g/mlISO 2811

Base oil viscosity at 40C 900mm/sDIN 51 562

Base oil viscosity at 100C 42mm/sDIN 51 562Temperature

Service temperature range 0 to +160short term +220

C

Drop point NoneCISO 2176

Loading capacity, protection against wear

Four-ball tester

Weld load 2100NDIN 51 350 T.4

Wear scar under 800N load 0.85mmDIN 51 350 pt.5

Almen-Wieland machine

OK load 14500N

Frictional force with OK load 1300N

ResistanceWater resistance, static evaluation step 0-90DIN 51 807 T.1

Oxidation resistance, pressure drop 100h,99C

1.3barDIN 51 808

Oil separation

Standard test 0.0%DIN 51 817

1. National Lubricating Grease Institute.* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm

FEATURES

Highly resistant to water

No drop point therefore no melting

or leakage from lubrication points

COMPOSITION

Mineral oil

Inorganic thickener

Solid lubricants

HOW TO USE

How to apply

Clean the contact areas. As is usualwith lubricating greases, apply by

means of a brush, spatula, grease-gun

or automatic lubrication device. Can

be used in central lubrication systems.If plastics or elastomers are present,

compatibility tests for swelling and


7/338

shrinkage, stress-crack formation,

changes in strength and hardness,

should be carried out because of the

difference in their qualities.


PRODUCT SAFETY

INFORMATION REQUIRED FORSAFE USE IS NOT INCLUDED.





PHYSICAL AND HEALTH




DOW CORNING SALES

REPRESENTATIVE.

USABLE LIFE ANDSTORAGE

When stored at or below 20C in the

original unopened containers, this



PACKAGING





Dow Corning sales office orDow Corning distributor.

LIMITATIONS




HEALTH AND

ENVIRONMENTAL

INFORMATION

To support customers in their productsafety needs, Dow Corning has an







representative.

WARRANTY

INFORMATION - PLEASE

READ CAREFULLY





products are beyond our control, thisinformation should not be used in




satisfactory for the intended end use.

Dow Corning's sole warranty is that







product shown to be other than aswarranted. Dow Corning specifically




Dow Corning provides you with a

specific, duly signed endorsement of







23/11/1998

DC 2941Ref. no. 71-0146B-01



8/338

MOLYKOTE FS 1292

Fluoro-Silicone Grease

APPLICATION" Lubricating grease for metal/metal combinations with slow to medium-fast

movements and medium loads over a wide temperature range.

TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.

Please contact your local Dow Corning sales representative prior to writing specifications on

this product.

Standard* Test Unit Result

Color Whitish


DIN 51 818 NLGI consistency class 1-2

ISO 2137 Worked penetration mm/10 280-340

ISO 2811 Density at 20C (68F) g/ml 1.28

DIN 51 562 Base oil viscosity at 25C (77F) mm2/s 1000

Temperature

Service temperature C -40 to +200 (+230

for short periods)

F -40 to +392 (+446

for short periods)

ISO 2176 Drop point C >250

F >482

ASTM-D147880 Low temperature torque test

at -30C (-22F)

Initial break-away torque Nm 118x10-3

Torque after 20 minutes running tim e Nm 41x10-3

ASTM-D147880 Low temperature torque test

at -40C (-40F)



Load-carrying capacity


DIN 51 350 pt.4 Weld load N 3400

Oil separation

DIN 51 817 Standard test % 0.3

* ASTM: American Society for Testing and Materials.

ISO: International Standardisation Organisation.

DIN: Deutsche Industrie Norm.

HOW TO USE

How to applyClean bearing surfaces. Apply greasein the normal way using a brush, grease

gun or automatic lubricating system.

MOLYKOTE FS 1292 Grease can be

used in centralised lubrication systems.Do not mix with other greases.

dcProduct Information

SpecialtyLubricants

FEATURES

" Particularly suitable for long-term

lubrication by virtue of its extremely low

tendency towards oxidation

" High drop point >250C (482F);

consequently reduced risk of melting and

run-out from lubrication point

" Wide service temperature range,

-40C to +200C (-40F to +392F);

for short periods, up to 230C (446F)" High resistance to water and water

washout

" Resistant to mineral oil, fuels and many

chemicals

COMPOSITION

" Fluorosilicone oil

" Organic thickener


9/338

HANDLING PRECAUTIONSProduct safety information required for

safe use is not included. Before

handling, read product and safety data

sheets and container labels for safe use,

physical and health hazard information.

The material safety data sheet is

available on the Dow Corning website

at www.dowcorning.com. You can also

obtain a copy from your local

Dow Corning sales representative or

Distributor or by calling your local

Dow Corning Global Connection.

USABLE LIFE AND

STORAGEWhen stored at or below 20C (68F) in

the original unopened containers, this



PACKAGINGThis product is available in different






LIMITATIONSThis product is neither tested nor



HEALTH AND

ENVIRONMENTAL

INFORMATIONTo support Customers in their product



organization and a team of Product

Safety and Regulatory Compliance

(PS&RC) specialists available in each

area.

For further information, please see our

website, www.dowcorning.com or


representative.

LIMITED WARRANTY


READ CAREFULLYThe information contained herein is

offered in good faith and is believed to

be accurate. However, because





ensure that Dow Corning's products are

safe, effective, and fully satisfactory

for the intended end use. Suggestions

of use shall not be taken as

inducements to infringe any patent.

Dow Corning's sole warranty is that the

product will meet the Dow Corning

sales specifications in effect at the time

of shipment.

Your exclusive remedy for breach of

such warranty is limited to refund of



warranted.

DOW CORNING SPECIFICALLY

DISCLAIMS ANY OTHER

EXPRESS OR IMPLIED

WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE OR

MERCHANTABILITY.

DOW CORNING DISCLAIMS

LIABILITY FOR ANY

INCIDENTAL OR

CONSEQUENTIAL DAMAGES.

WE HELP YOU INVENT THE

FUTURE."

www.dowcorning.com

MOLYKOTE FS 1292 Fluoro-Silicone Grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.

2 08/02/2002 MOLYKOTE is a registered trademark of Dow Corning Corporation.

Ref. no. 71-0165C-01 DC 2991 0-2002 Dow Corning Corporation. All rights reserved.


10/338

MOLYKOTE 165 LT

Gearwheel greaseGearwheel grease for the lubrication of highly stressed open

gears and reducing gears made of metal, with a peripheral speed

of up to 2.5 m/s

APPLICATIONS" Open gears that are subjected to high stresses and bad weather effects.

" Successfully used in crushing plants and in transmission gears and threaded

spindles of heavy, crank-driven presses.

TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.Please contact your local Dow Corning sales representative prior to writing specifications on

this product.


Color Black


ISO 2137 Unworked penetration mm/10 240-270

ISO 2811 Density at 20C (68F) g/ml 0.96

DIN 51 562 Base oil viscosity at 40C (104F)1 mm2/s 320

Temperature

Service temperature range C -25 to +120

F -13 to +248

ISO 2176 Drop point C 175

F 347

ASTMD147880 Low temperature torque test at -20C (-4F)

Break-away torque Nm 880x10-3

Torque after 20 minutes running time Nm 115x10-3

DIN 51 805 Kesternich method - flow pressure at -20C (-4F) mbar 1350

Loading capacity, protection against wear, service life

Four-ball tester

DIN 51 350 T.4 Weld load N 4400

DIN 51 350 T.5 Wear scar under 800N load mm 1.2


OK load N 20000

Frictional force with OK load N 2900

Corrosion protection

DIN 51 802 SKF-Emcor method

Degree of corrosion 0

Resistance

DIN 51 807 T.1 Water resistance, static evaluation step 2-90

DIN 51 808 Oxidation resistance, pressure drop 100h,

99C (210F)

bar 0.2


SpecialtyLubricants

FEATURES

" Extremely high load-carrying capacity

" Wear protection and reduction of existing

pitting in gear teeth flanks during

operation, due to the solid lubricants

incorporated in the grease. Extremely

adhesive due to build-in adhesion

improver

" Good protection against corrosion

(corrosion index 0 when tested using theSKF-Emcor method)

" Contains no lead or nickel

COMPOSITION

" Mineral oil

" Lithium soap

" Solid lubricants

" Corrosion inhibitor

" Adhesion improver

" EP additives


11/338

TYPICAL PROPERTIES (continued)


Oil separation

DIN 51 817 Standard test % 1.2

1. Calculated viscosity value of base oil mixture.


ISO: International Standardisation Organisation.DIN: Deutsche Industrie Norm.

HOW TO USE

How to applyCarefully clean the metal surfaces and

apply using a spatula or brush.




sheets and container labels for safe use,physical and health hazard information.








USABLE LIFE AND











LIMITATIONS

This product is neither tested norrepresented as suitable for medical or


HEALTH AND

ENVIRONMENTAL







area.




representative.

LIMITED WARRANTY








substitution for customer's tests toensure that Dow Corning's products are

safe, effective, and fully satisfactory







of shipment.





warranted.


DISCLAIMS ANY OTHER

EXPRESS OR IMPLIED



MERCHANTABILITY.

DOW CORNING DISCLAIMSLIABILITY FOR ANY

INCIDENTAL OR



FUTURE."

www.dowcorning.com

MOLYKOTE 165 LT Gearwheel grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.




12/338

Product Information

High PerformanceMolykote

33 Extreme

Low Temperature Bearing Grease,Molykote

41 Extreme High

Temperature Bearing Grease,

Molykote

44 High Temperature

Bearing Grease

Lubricants

FEATURES Lubricants for antifriction bearings and plastic and rubberparts

USESAll three Molykote

Bearing Grease are used to lubricate ball bearings operating

under light to moderate loads. These can be used for:

Molykote 33 Extreme Low Temperature Bearing Grease

Freezer cart casters and cold room conveyor equipment

Utility disconnect switch contacts

Plastic electric clock motors

Maximum-demand meters, power-factor meters, watt-hour meters

Windshield wiper motor gears

Photographic, optical and surveying equipment

Oscillographs, geophysical and light, low-torque instruments

Starter clutch drives

Molykote

41 Extreme High Temperature Bearing Grease

Antifriction bearings of high-temperature equipment

Oven conveyor bearings

Wheel bearings of core oven carts

Governor linkage of steam turbines

Ball and socket connections of power insulators

Molykote

44 High Temperature Bearing Grease

Kiln preheater fans, oven fans, radiator cooling fans

Textile slashers and driers

Aircraft engine Conveyor systems

These greases do not soften or affect most plastics and are used to lubricate

plastic gears, bearings and cams, as well as metal and rubber parts. Because of

low torque requirements, Molykote

33 Extreme Low Temperature Bearing

Grease is especially effective in equipment that must start in extreme cold.

Oxidation Resistance Molykote Bearing Greases are recommended for use in

units that must remain operable when subjected not only to low and high

operating temperatures, but also to severe weathering and oxidation.

x

Resistance to oxidation, moisture andcorrosive atmospheres

x Inertness

x Good shear stability

x Wide service temperature range:

33 Extreme Low Temperature

Grease: -100 to 400F (-73 to 204C)

41 Extreme High Temperature

Grease: 0 to 550F (-18 to 288C)

44 High Temperature Grease: -40 to

400F (-40 to 204C)

x Compatible with many plastics

COMPOSITION

x Lithium soap

x Phenylmethyl silicone oil


13/338

We help you invent the future is a trademark of DoMolykote 33 Extreme Low Temperature Bearing Grease w Corning Corporation.Molykote 41 Extreme High Temperature Bearing Grease egistered trademark of Dow Corning Corporation.Molykote 44 High Temperature Bearing Grease ow Corningis a registered trademark of Dow Corning Corporation.

Ref. No. 10-814C-01 DIC164544 2006 Dow Corning Corporation. All rights reserved.

Molykote is a rMay 4, 2006, D

TYPI L PR PERTIESpecification Writers: These values are not intended for use in preparing specifications. Please contact your local

Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.

Method Test Results

33 Light 33 Medium 41 Grease 44 Light 44 Medium

Color Off White Off White Black Off White Off WhiteThickner Lithium Soap Lithium Soap Carbon Black Lithium Soap Lithium Soap

Base Oil Silicone Silicone Silicone Silicone Silicone

DIN 51 562 Base Oil Viscosity @ 25C, mm2/s 100 100 316 125 125

ASTM D 217 Penetration, worked 60 strokes, mm 320 280 280 300 280

NLGI # 1 2 2 ~1 2

DIN 51 350 pt4 4 ball weld load, N (kg) 1200 (122) 1200 (122) 1500 (152) 1100 (113) 1100 (113)

Max Dn Value1 (Bore Size in mm X rpm) 250,000 200,000 75,000 350,000 300,000

Service Temperature2 Degrees C (F) -73 to 204

(-100 to 400)

-73 to 204

(-100 to 400)

-18 to 288

(0 to 550)

-40 to 204

(-40 to 400)

-40 to 204

(-40 to 400)

ASTM D 2265 Drop Point Degrees C (F) 226 (439) 226 (439) >300 (>572) 220 (432) 220 (432)

Fed Std 791 Bleed after 24 hrs @149C (300F) % 2 1 4.8 3 2.5 2

DIN 51 817 Oil Separation (Standard Test, 7 days at 40C) % 3.2 1.6 2.6 2.4 1.4

Specific Gravity @25C (77F) 0.97 0.97 1.14 1.05 1.05

ASTM D 1478-80 Low Temperature Torque @ -73C

Initial Break-away Torque, Nm 130 x 10 -3 164 x 10 -3

Torque after 20 minutes running time, Nm 13 x 10 -3 22 x 10 -3

Low Temperature Torque @ -40C

Initial Break-away Torque, Nm 225 x 10 -3 336 x 10 -3

Torque after 20 minutes running time, Nm 60 x 10 -3 124 x 10 -3

DIN 51 808 Oxidation Resistance, pressure drop 100hr,

99C (210F) bar (psi) 0.4 (5.80) 0 0.1 (1.45)

DIN 51 821-02-A FAG Rolling Element Bearing Tester, FE9,

1500/6000-150, F50, Hrs 110 110

1Maximum Dn values are approximations and will vary widely with temperature, load and bearing type.2Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specificapplication environment.3Values are at 392F (200C).

Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may beobtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.

Figure 1. Suggested Product Temperature Range Recommendations

Limitations of Typical Organic Greases

-100F -20F 260F 450F 550F

Molykote

44 High Temperature Grease

Molykote

41 ExtremeHigh Temperature Grease

Molykote

33 Extreme Low Temperature Grease


14/338

DESCRIPTIONMolykote 33 Extreme Low


Molykote 41 Extreme High

Temperature Bearing Grease and

Molykote 44 High Temperature

Bearing Grease are silicone lubricating

oils with thickeners added.Molykote 33 Extreme Low


Molykote

44 High Temperature

Bearing Grease are thickened with a

special lithium soap; Molykote

41

Extreme High Temperature Bearing

Grease is thickened with carbon black.

Molykote 33 Extreme Low



Bearing Grease are available in lightand medium consistencies NLGI #1

and #2. Molykote 41 Extreme High

Temperature Bearing Grease is

available in a medium consistency

NLGI #2.

LISTINGS/SPECIFICATIONSMolykote 33 Extreme Low

Temperature Bearing Grease is USDA

listed for use as a lubricant where there

is no possibility of food contact.

HOW TO USEConventional grease application

methods brushing, grease gun or

automatic application are suitable for

use with these Molykote Bearing

Greases. Laboratory tests and field

reports indicate that heavy duty guns

available from such manufacturers as

Lincoln-St. Louis are preferred.

Note: Extra care should be taken at alltimes to prevent dirt from

contaminating the lubricant. These

greases should be packed with a clean

metal or ebonite spatula.

LIMITATIONSThese greases should not be applied to

surfaces that are to be painted. These

greases should not be used with highly

loaded ferrous metal bearing

combinations, especially where sliding

friction is encountered.


Temperature Bearing Grease

Bearings operating at extremely high

temperatures need to be frequently

monitored to ensure that the grease has

not dried out. If this occurs, more

grease can be added, or the existing

grease rejuvenated by adding

Dow Corning

710 Fluid.

These products are neither tested nor



SHIPPING LIMITATIONSNone.

USABLE LIFE AND

STORAGEWhen stored at or below 90F (32C),






Bearing Grease have a shelf life of

60 months from date of manufacture.

Refer to product packaging for Use

By date.

PACKAGINGNot all sizes available in allgeographies.



supplied in 100-g tubes, 150-g tubes,

400-g cartridges, 1-kg cans, 3.6-kg

cans, 18-kg pails, 25-kg pails, 55-kg

drums, and 180 kg drums.



supplied in 100-g tubes, 150-g tubes,

400-g cartridges, 1-kg cans, 3.6-kg

cans, 5-kg pails, 18-kg pails, 25-kg

pails, and 181.4-kg drums.

Molykote 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation.Molykote 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation.Molykote 44 High Temperature Bearing Grease May 4, 2006, Dow Corningis a registered trademark of Dow Corning Corporation.



Bearing Grease is supplied in 100-g

tubes, 150-g tubes, 400-g cartridges,

3.6-kg cans, 5-kg pails, 18-kg pails,

25-kg pails, and 180-kg drums.




sheets and container labels for safe

use, physical and health hazard

information. The material safety data

sheet is available on the Dow Corning

website at www.dowcorning.com. You

can also obtain a copy from your local




HEALTH ANDENVIRONMENTAL







area.




representative.


15/338

Molykote 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation.Molykote 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation.Molykote 44 High Temperature Bearing Grease May 4, 2006, Dow Corningis a registered trademark of Dow Corning Corporation.


LIMITED WARRANTYINFORMATION - PLEASEREAD CAREFULLYThe information contained herein is




products are beyond our control, thisinformation should not be used in








the product will meet the Dow Corning


of shipment.





warranted.


DISCLAIMS ANY OTHER

EXPRESS OR IMPLIED


PARTICULAR PURPOSE ORMERCHANTABILITY.


LIABILITY FOR ANY

INCIDENTAL OR


We help you invent the future.

www.dowcorning.com


16/338

Product Information

Silicon-BasedCompounds

FEATURES

High thermal conductivity

Low bleed

Stable at high temperatures

COMPOSITION

Greaselike silicone fluid thickened

with metal oxide filler

Dow Corning 340

Heat Sink Compound

Compound provides thermal coupling of electrical/electronic

devices to heat sinks

USES

Dow Corning 340 Heat Sink Compound is applied to the base and mounting

studs of transistors, diodes and silicon-controlled rectifiers. It can also serve as an

effective thermal coupler for many heat sink devices where efficient cooling is

required. It is also suitable for aircraft engines where heat sink properties arerequired.

This product has also been used as a high-voltage corona suppressant, nonflammable

coating in connections for flyback transformers and TV sets and similar applications.

TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your Global

Dow Corning Connection before writing specifications on this product.

Method Test Unit Result

Color WhiteASTM D 217 Consistency, Penetration

unworked 300worked 60 strokes 275worked 100,000 strokes 245

Fed. Std. 791, Bleed after 24 hr at 392F (200C) percent 0.05

Method 321.2Fed. Std. 791, Evaporation after 24 hr at 392F (200C) percent 0.5

Method 321.2

ASTM D 2265 Drop Point F (C) 570 (300)ASTM D 1475 Specific Gravity at 77F (25C) 2.1

CTM1 0069 Thermal Conductivity, K Factor cal/ sec-cm-C 0.0014

ASTM D 149 Dielectric Strength2 volts/ mil 210ASTM D 495 Arc Resistance seconds 165

ASTM D 150 Dielectric Constant,at 100 Hz 5

at 100 kHz 5ASTM D 150 Dissipation Factor,

at 100 Hz 0.01at 100 kHz 0.02

ASTM D 1169 Volume Resistivity ohm-cm 2 x 1015

ASTM D 4049 Water Spray Off percent 1.3

1CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances.2Measured using a sample thickness of 50 mils.

DESCRIPTION

Dow Corning340 Heat Sink Compound

is a grease-like silicone material, heavily

filled with heat conductive metal

oxides. This combination promoteshigh thermal conductivity, low bleed

and high-temperature stability.

The compound resists changes in con-

sistency at temperatures up to approxi-

mately 350F (177C). In doing so, it

helps maintain a positive heat sink seal

to improve heat transfer from theelectrical/electronic device to the heat

sink or chassis, thereby increasing

overall efficiency of the device.


17/338

Printed in USA Dow Corningis a registered trademark of Dow Corning Corporation.

Form No. 10-748B-01 AGP5223 1997, 1999, 2000 Dow Corning Corporation. All rights reserved.


PRODUCT SAFETY INFORMATION

REQUIRED FOR SAFE USE IS NOT

INCLUDED IN THIS DOCUMENT.


PRODUCT AND MATERIAL

SAFETY DATA SHEETS AND

CONTAINER LABELS FOR SAFE

USE, PHYSICAL AND HEALTH


MATERIAL SAFETY DATA SHEET

IS AVAILABLE FROM YOUR

DOW CORNING REPRESEN-

TATIVE, OR DISTRIBUTOR, OR

BY CALLING YOUR GLOBAL

DOW CORNING CONNECTION.

USABLE LIFE AND

STORAGE

Dow Corning340 Heat Sink Com-

pound has a shelf life of 60 months

from date of manufacture. Refer to

product packaging for Use By date.

PACKAGING

Dow Corning340 Heat Sink Com-

pound is available in 5-oz (142-g)

tubes, 13.5-oz (383-g) weight/

5.75-fl oz (170-mL) volume Semco

cartridges, 20-lb (9-kg) pails, and

275-lb (124.7-kg) drums for produc-

tion lines and large scale operations.

All weights, net.

LIMITATIONS


represented as suitable for medical

or pharmaceutical uses.

SHIPPING LIMITATIONS

None.

WARRANTY INFORMATIONThe information contained herein isoffered in good faith and is believed





substitution for customers tests to

ensure that Dow Cornings products

are safe, effective, and fully satisfactory

for the intended end use.

Dow Cornings sole warranty is that

the product will meet the Dow Corningsales specifications in effect at the time

of shipment. Your exclusive remedy

for breach of such warranty is limited

to refund of purchase price or replace-

ment of any product shown to be other

than as warranted. Dow Corning speci-

fically disclaims any other express or

implied warranty of fitness for a par-

ticular purpose or merchantability.

Unless Dow Corning provides you

with a specific, duly signed endorse-

ment of fitness for use, Dow Corningdisclaims liability for any incidental or

consequential damages. Suggestions of

use shall not be taken as inducements

to infringe any patent.


18/338

MOLYKOTE 3400 A

Thermosetting anti-friction coating

Specialty

Lubricants

Product Information

TYPICAL PROPERTIES


Test

Thermosetting anti-friction coating for metal/metal

combinations involving slow to medium-fast movements

and medium to heavy loads

Standard Unit Result

APPLICATIONS

Suitable for permanent lubrication, with simultaneous corrosion protection, of

friction contacts involving high compressive stress and low speeds, and

wherever oils or greases cannot be used for technical reasons or are

undesirable because of the risk of soiling. Used successfully on hinge pins, plain bearings, cams, keyways and dentate

couplings on aircraft, on pins, springs and bearing surfaces of motor-car

brakes, moving parts of locks, switches and regulators; on special chains and

on all types of magnetic armature.

Color Grey

Density

Density at 20C 1.2g/mlISO 2811

Temperature

Service temperature -200 to +430C


Falex pressure resistance p=20000*NASTM-D2625

LFW-1, rotatingF=2860, N,n=72 rpm, v=7.9 min, no.ofrevolutions to =0.1

p=85000*ASTM-D2714

LFW-1, oscillating, load 900N,

frequency=89.5 os./min. no. ofoscillations to =0.08

p=42000*

1. * Surface: p = phosphatised

FEATURES

Outstanding corrosion protection

Excellent adhesion to metal

Low friction coefficient

High resistance to oil and fuels

Prevents fretting corrosion

Exceptionally wide servicetemperature range

(-198 to +430C)

High abrasion resistance,

consequently long service life

High compressive strength

COMPOSITION

Solid lubricants

Corrosion inhibitors

Organic binders

Solvents

HOW TO USE

How to apply

Carefully degrease friction surfaces

with solvent and allow solvent to

evaporate completely. Stir the

anti-friction coating thoroughly and

apply by spraying, dipping, painting

or centrifuging (dilute with

MOLYKOTE L 13 - approximately

10-20%). The friction surfaces should

be coated as evenly and thinly aspossible. Annealing: 2 hours at 150C

or 1 hour at 200C.

Diluting agent: L 13 thinners.


PRODUCT SAFETY





SHEETS AND CONTAINERLABELS FOR SAFE USE,

PHYSICAL AND HEALTH


19/338




DOW CORNING SALES

REPRESENTATIVE.

USABLE LIFE AND

STORAGEWhen stored at or below 20C in the

original unopened containers,

MOLYKOTE 3400 A Thermosetting

Anti-Friction Coating has a usable life

of 60 months from the date of

production.

PACKAGING




obtained from your nearestDow Corning sales office or


LIMITATIONS




HEALTH AND

ENVIRONMENTAL

INFORMATION

To support customers in their productsafety needs, Dow Corning has an







representative.

WARRANTY

INFORMATION - PLEASEREAD CAREFULLY






















purpose or merchantability. UnlessDow Corning provides you with a








03/03/1998

DC 2995Ref. no. 71-0030A-01



20/338

MOLYKOTE 3402 C

Anti-friction Coating

Product Information


Please contact your local Dow Corning sales representative prior to writing specificationson this product.

Test

Air-curing dry lubricant


APPLICATIONS

Excellent combination of corrosion protection and lubrication.

Used on main axle threads of drill hammers, spindles.

Color Grey

Physical properties

Viscosity at 20C or 68F (DIN3 cup) 47sDIN 53211/3

Density at 20C (68F) 1.08g/mlDIN 53217/2

Non-volatile content 34.5%CTM 0242 I

Storage life 5years

Temperature

Drying time at 20C (68F) 15minutesCuring time 120/20minutes/C

Curing time 120/68minutes/F

Service temperature range -200 to +310C

Service temperature range -328 to +590F


Falex load-carrying capacity s=10700NASTM-D2625

LFW-1, rotating s=45ASTM-D2714

F=2860N, n=72 minutes,v=7.9m/minutes

no. of revolutions x1000 to =0.1

LFW-1, oscillating s=25ASTM-D2714

F=900N, frequency=89.5osc./minutesno. of oscillations to =0.08

Resistance

Radiation resistance 10rad

1. Surface pretreatment: s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm

FEATURES

Excellent corrosion protection

Excellent lubricity

Air-curing

Strong pressure and wear resistance

COMPOSITIONSolid lubricants

Organic binder

Corrosion inhibitor

Solvent

HOW TO USE

Surface preparation

First clean and degrease the surface

which will be coated withMOLYKOTE 3402 C Anti-Friction

Coating. Phosphatization or

sandblasting (180 grid) increases the

adhesion and service life.


21/338

How to apply

Stir the Anti-friction Coating

thoroughly before applying by

spraying, dipping, centrifuging or

brushing. Recommended dry film

thickness: 5 to 20m.

Curing120 minutes at 20C (68F).

Solubility

Thinning can be carried out using

MOLYKOTE L 13 Thinner.


PRODUCT SAFETY




PRODUCT AND SAFETY DATASHEETS AND CONTAINER


PHYSICAL AND HEALTH




DOW CORNING SALES

REPRESENTATIVE.

USABLE LIFE AND

STORAGE

When stored at or below 20C (68F)in the original unopened containers

MOLYKOTE 3402 C Anti-friction

Coating has a usable life of 60 months


PACKAGING







LIMITATIONS




HEALTH AND

ENVIRONMENTAL

INFORMATION

To support customers in their product


extensive Product Stewardshiporganization and a team of Health,





representative.


READ CAREFULLY























Dow Corning provides you with a








13/03/2000

DC 3634Ref. no. 71-0041D-01



22/338

P R O D U C T I N F O R M A T I O N

Information About

MOLYKOTE

3451Chemical ResistantBearing Grease and

MOLYKOTE 3452Chemical ResistantValve Lubricant

TypeFluorosilicone greases

Special PropertiesChemical resistance; good load-

carrying ability, effective in high

temperatures

Primary UsesMOLYKOTE 3451 Chemical

Resistant Bearing Grease

NLGI #2

Exceptional antifriction

lubricant for bearings exposed to

harsh chemicals, solvents, hightemperatures, high speeds or

heavy loads

MOLYKOTE 3452 Chemical

Resistant Valve Lubricant

NLGI #3

Lubricant and sealant for valves,

shafts and packings exposed to

corrosive or aggressive chemicals

or high temperatures

DESCRIPTIONMOLYKOTE 3451 Chemical Resistant

Bearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricant are

fluorosilicone oils thickened with

fluorinated polymers. These lubricants:

Provide superior resistance to most

chemicals

Are compatible with most gaskets,

seals and packings

Resist washout by water, fuels, oils

and solvents

These greases lubricate over a wide

temperature range.MOLYKOTE 3451Chemical Resistant Bearing Grease has

good life at temperatures from -40 to

450F (-40 to 232C);MOLYKOTE 3452

Chemical Resistant Valve Lubricant

has a serviceable temperature range

from -20 to 450F (-29 to 232C). Both

MOLYKOTE 3451 Chemical Resistant

Bearing Grease and MOLYKOTE 3452


resist deterioration by solvents, acids,

chlorides and other severe chemicals

as well as low-pressure steam and

condensate. (See Table I .)

Bearing tests showMOLYKOTE3451

Chemical Resistant Bearing Grease has

good life at varying high loads andspeeds.

USES

MOLYKOTE3451 ChemicalResistant Bearing GreaseMOLYKOTE 3451 Chemical ResistantBearing Grease is an exceptional anti-

friction bearing lubricant especially

designed for applications that experience

a wide range of temperatures, loads

and speeds. It is particularly useful in

bearings exposed to harsh chemicals

or solvents, bearings used at highspeeds and bearings subjected to heavy

loads. MOLYKOTE3451 Bearing Grease

can be used on:

Chemical mixers

Needle bearings in circuit breakers

Pumps

Processing equipment

Fuel- and solvent-handling

equipment

Sealed-for-life bearings that must

operate at high speeds, heavy loads,

and high and low temperatures

Valves protected byMOLYKOTE3452 Chemical Resistant ValveLubricant show no evidenceofcorrosion or degradation of lubricant.

BL

17877

-1


23/338

TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.

.................................................................................................... Molykote Molykote.................................................................................................... 3451 3452

.................................................................................................... Chemical Resistant Chemical Resistant

.................................................................................................... Bearing Grease Valve Lubricant

NLGI Consistency ...................................................................... #2 #3Color ........................................................................................... White White

Thickener ................................................................................... Fluorinated polymers Fluorinated polymersASTM D 217 Penetration, worked, 60 strokes................................................ 275 270

Viscosity of fluorosilicone oil at 100F (38C), SUS ................ 2295 46,000Service Temperature Range1, F (C) ...................................... -40 to 450 (-40 to 232) -20 to 450 (-31 to 232)Max. Dn Value2 .......................................................................... 200,000 75,000Specific Gravity at 77F (25C) ................................................. 1.44 1.50

Fed Std 791 Bleed, at 400F (204C) , percent .............................................. 2.7 1.2ASTM 2265 Evaporation, at 400F (204C), percent ................................... 3.7 1.1

Dropping Point, F (C) ............................................................ >536 (>280) >570 (>300)

ASTM D 1264 Water Washout, at 175F (80C), percent................................ 0.3 0.1Fed Std 791a3 4-Ball Weld Load,Kg................................................................... 400 400ASTM D 1478 Low-Temperature Torque

starting, g-cm at -40F (-40C) ............................................... 2315running, g-cm after 1 hr at -40F (-40C) ............................. 1960

1Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including thespecific application environment.

2Dn value =shaft size of bearing in mm x rpm; based on estimate.3Method 6503.

Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for yourspecifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI.Call (989) 496-6000.

Table I: Chemical Resistance ofMOLYKOTE3451 Chemical Resistant Bearing Grease andMOLYKOTE3452 Chemical

Resistant Valve Lubricant

.......................................................................................................... MOLYKOTE MOLYKOTE

.......................................................................................................... 3451 3452

.......................................................................................................... Chemical Resistant Chemical Resistant HydrocarbonAfter 24 hours at 77F (25C)1 ................................................................................................ Bearing Grease Valve Lubricant Grease2

Diesel ................................................................................................ Good3 Good PoorKerosene .......................................................................................... Good Good FairSilicone Fluid ................................................................................... Fair Good PoorToluene............................................................................................ Good Good PoorHexane............................................................................................. Fair Fair PoorXylene .............................................................................................. Good Good PoorIsopropanol ...................................................................................... Good Good FairMethanol .......................................................................................... Good Good FairVM&P Naphtha............................................................................... Good Good Poor

1Test method Federal Standard 791C-6.2.2A lithium-thickened petroleum grease.3Good no observable effect on grease [grease slightly soft; poor adhesion] ; Fair grease very soft; cracked and poor adhesion; Poor grease hardened or dissolved; noadhesion.


24/338

MOLYKOTE3452 ChemicalResistant Valve LubricantMOLYKOTE 3452 Chemical Resistant

Valve Lubricant is an exceptional valve

lubricant and sealant product particu-

larly suited for applications where cor-

rosive or aggressive chemicals are used.

MOLYKOTE 3452Valve Lubricant can

be used on:

Plug valvesMechanical seals and packings

Slow-speed roller and journal

bearings

Moderate-speed ball bearings

Instruments in high vacuum, at high

temperatures and in corrosive

atmospheres

Rotary and reciprocating shaft seals

Flexible ball joints

LIMITATIONSMOLYKOTE 3451 Chemical Resistant

Bearing Grease should not be applied

to surfaces to be painted.

MOLYKOTE3451 Chemical Resistant


Chemical Resistant Valve Lubricant are

not recommended for use with highly

oxidative chemicals (liquid Cl2or

liquid O2, for example).

These greases are soluble in ketones

such as acetone, methyl ethyl ketone

and methyl isobutyl ketone.

This product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.

HOW TO USE

ApplicationMOLYKOTE3451 Chemical Resistant



can be applied using conventional

methods of grease application

brushing, grease gun or automatic

applicators.


STORAGE AND SHELF LIFEWhen stored at or below 90F (32C),

MOLYKOTE 3451 Chemical Resistant



have a shelf life of 60 months from

date of manufacture.

Note: In storage, a small amount of oil

may separate fromMOLYKOTE 3451

Chemical Resistant Bearing Grease.

This separation does not materially

affect the lubricating qualities of the

grease. Simply stir fluid back into the

grease.

PACKAGINGMOLYKOTE 3451 Chemical Resistant

Bearing Grease is available in tubes

cartridges and pails

MOLYKOTE3452 Chemical Resistant

Valve Lubricant is available in tubes,

cartridges, pails.

SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATION


INCLUDED. BEFORE HANDLING,

READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-

TAINER LABELS FOR SAFE USE,

PHYSICAL AND HEALTH HAZARD

INFORMATION. THE MATERIAL

SAFETY DATA SHEET IS AVAILABLE

FROM YOUR DOW CORNING REP-

RESENTATIVE, OR DISTRIBUTOR,

OR BY WRITING TO DOW CORNING

CUSTOMER SERVICE, OR BY

CALLING (989) 496-6000.

LIMITED WARRANTY

PLEASE READ CAREFULLYDow Corning believes that the

information in this publication is an

accurate description of the typical

characteristics and/ or uses of the

product or products, but it is your

responsibility to thoroughly test the

product in your specific application to

determine its performance, efficacy

and safety. Suggestions of uses should

not be taken as inducements to

infringe any particular patent.

Figure 1:Percent Volume Change of Various Rubbers inMOLYKOTE3452 Chemical Resistant Valve Lubricant

VolumeChange,percent


25/338

Dow Corning CorporationMidland, Michigan 48686-0994

Dow Corning is a registered trademark ofDow Corning Corporation.

1994, 1998 Dow Corning Corporation.All rights reserved.

Printed in USA AGP3853A Form No. 10-813-98B-01

Unless Dow Corning provides you with

a specific written warranty of fitness

for a particular use, Dow Corning s

sole warranty is that the product or

products, as supplied, will meetDow Cornings then current sales

specifications.DOW CORNING

SPECIFICALLY DISCLAIMS ANY

OTHER EXPRESS OR IMPLIED

WARRANTY, INCLUDING THE

WARRANTIES OF MERCHANT-

ABILITY AND OF FITNESS FOR

USE.Your exclusive remedy and

Dow Cornings sole liability for breach

of warranty is limited to refund of the



warranted, and Dow Corning expresslydisclaims any liability for incidental or

consequential damages.


26/338

MOLYKOTE FS 3452

Fluoro-Silicone Grease

Lubricating and sealing grease for metal/metal, metal/plastic

and metal/elastomer combinations involving slow movements

and heavy loadings over very wide temperature ranges,

particularly under unfavorable environmental influences

APPLICATIONS" Suitable for the above friction contacts and service conditions.

" Successfully used on valves, mechanical seals and pumps, ball-and socket-joints,

bearings, on loading arms for ships and vacuum contained equipment.



this product.


Color White


DIN 51 818 NLGI consistency class 2-3

ISO 2137 Worked penetration mm/10 240-280

ISO 2811 Density at 20C (68F) g/ml 1.47Base oil viscosity at 25C (77F) mm2/s 10000

Temperature

Service temperature C -30 to +230

F -22 to +446

ISO 2176 Drop point C >220

F >428

ASTM-D147880 Low temperature torque test at -20C (-4F)



DIN 51 805 Kesternich method - flow pressure

at -20C (-4F)

mbar 280



DIN 51 350 pt.4 Weld load N 4400


OK load N 15500

Frictional force with OK load N 3500

Resistance

DIN 51 807 pt.1 Water resistance, static evaluation step 0-90

DIN 51 808 Oxidation resistance, pressure drop 100h,

99C (210F)

bar 0.0


SpecialtyLubricants

FEATURES

" Low evaporation

" High oxidation resistance

" Wide service temperature range,

-30C to +230C (-22F to +446F)

" High resistance to water and water

washout

" Resistant to most solvents and chemicals

" Compatible with many plastics and

elastomers

COMPOSITION

" Fluorosilicone oil

" PTFE thickener


27/338

TYPICAL PROPERTIES (continued)


Oil separation

DIN 51 817 Oil separation - standard test % 2.8


ISO: International Standardisation Organisation.

DIN: Deutsche Industrie Norm.

HOW TO USE

How to applyClean bearing surfaces. Apply grease

in the normal way using a brush or

grease gun. Do not mix with other

greases. Due to variation in quality of

plastics and elastomers, compatibility

tests should be carried out for swelling

and shrinkage, stress-crack formation,

and changes in strength and hardness.

HANDLING PRECAUTIONSHands should be washed before eating,

drinking or smoking. Avoid contact

with the eyes and skin. Traces of toxic

trifluoropropionaldehyde may be

formed at temperatures of >150C

(>302F). Adequate ventilation must be

provided in enclosed spaces. At

temperatures above 290C (554F),

fluorine and hydrogen fluoride may be

evoked.

Product safety information required for



sheets and container labels for safe use,

physical and health hazard information.








USABLE LIFE AND











LIMITATIONSThis product is neither tested nor

represented as suitable for medical orpharmaceutical uses.

HEALTH AND

ENVIRONMENTAL







area.




representative.

LIMITED WARRANTY









ensure that Dow Corning's products aresafe, effective, and fully satisfactory







of shipment.





warranted.


DISCLAIMS ANY OTHER

EXPRESS OR IMPLIED



MERCHANTABILITY.


LIABILITY FOR ANYINCIDENTAL OR



FUTURE."

www.dowcorning.com

MOLYKOTE FS 3452 Fluoro-Silicone Grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.




28/338

Product Information

High PerformanceLubricants

FEATURES

Maintain serviceable consistency

from -70 to 400F (-57 to 204C)

Practically nonvolatile

Odorless

Resistant to a wide range of

chemicals; generally resistant to

mineral oils, vegetable oils, air,dilute acids, alkalines and most

aqueous solutions;Dow Corning

111 Valve Lubricant & Sealant is

quite resistant to a variety of

organic and inorganic chemicals

Moisture resistant

Electrically insulating

Excellent rubber lubrication

Excellent release and sealing

proper ti es

Resistant to oxidation

Essentially nontoxic and non-

melting

Show little tendency to dry out in

service

COMPOSITION

Greaselike materials containing

an inert amorphous silica filler in

combination with selected

polydimethyl silicone fluids

Dow Corning 7 ReleaseCompound, Dow Corning 4 ElectricalInsulating Compound and Dow Corning

111 Valve Lubricant & Sealant

Dimethyl silicone compounds for a variety of lubrication and

protection applications

USES

Dow Corning 7 Release Compound can be used in applications including:

Mold release agent for foundry shell and core molds

Break-in treatment for bladders on tire presses

Rubber lubricant and preservative Release agent for adhesives and glues

Airframe lubricant

Cable-pulling lubricant to draw rubber-covered cable through conduit

Release agent for plastic extruders and processing equipment

Release agent for plastic film packaging machines

Uses ofDow Corning 4 Electrical Insulating Compound include:

Moisture-proof seal for aircraft, automotive and marine ignition systems

and spark plug connections

Waterproof electrical connections

Electrical assemblies and terminals

Seal and lubricant for cable connectors, battery terminals, rubber door

seals and rubber and plastic O-rings Assembly lubricant for various metal-on-plastic and metal-on-rubber

combinations

Lubrication for control and pressure plug valves

Dow Corning 111 Valve Lubricant & Sealant can be used in applications such as:

Sealant for vacuum and pressure systems

Sealant for outdoor equipment, including shipboard applications, subject

to washing and harsh environments; meters; electrical service entrance

and underground connections

Damping medium for dash pots in electrical and electronic equipment

Chemical barrier coating

Antistick and sealant for transformer gaskets and equipment enclosures,

which help prevent gaskets from sticking to metal and resist weatheringand water washout

Lubricant for rubber and plastic

O-rings (see Use Limitations)

Sealant for gaskets and seals

Lubricant for water softener and faucet valves

Valve stem lubricant for potable water

Aircraft vacuum systems


29/338

1Follow solvent manufacturers recommended safehandling instructions and applicable federal, stateand local regulations.

DESCRIPTION

Dimethyl silicone compounds come

in three basic consistencies:

Light Dow Corning7 Release

Compound

Medium Dow Corning4

Electrical Insulating Compound

Heavy Dow Corning111 Valve

Lubricant & Sealant

LISTINGS/

SPECIFICATIONS

These compounds are permitted

for food contact use under FDA

Regulation 21 CFR 175.300, cover-

ing polymeric coatings applied as

continuous film over a metal sub-

strate. Additionally, these compounds

are listed under NSF Standard 51

for use in food processing equip-

ment and NSF Standard 61 for use

in potable water applications.

Dow Corning4 Electrical Insulating

Compound is designed to meet the

requirements of SAE AS 8660.

HOW TO USE

For best results, clean and dry

surfaces before application.

Dow Corningsilicone compounds can

be applied by hand, by specially

designed automated equipment, or

by brushing or wiping. When using

some high pressure dispensing

equipment, separation and compac-

tion can occur. Certain designs of

grease guns may seize with silicone

compounds; test prior to using.

Where a thinner consistency is

needed, the compound can bedispersed in a solvent and applied

by brushing or spraying.1

USE LIMITATIONS

These specificDow Corning

compounds should not be applied:

To any surface that will be

painted or finished. Such

coatings may not adhere to the

silicone-treated surfaces. If

contaminated by a silicone

coating, parts can be wiped or

washed with solvent or washed

with detergent.

To O-rings or other components

made of silicone rubber because

they can deteriorate the silicone

rubber. These compounds will

also slightly swell natural butyl

rubbers. Any rubber should be

tested for excessive swell or

shrink.

Because each application may vary

in chemical composition, pressure,

flow velocity, relubrication require-

ments and equipment design, the

silicone compound should be tested

before adopting for regular use.

These compounds are not intended for

use with liquid oxygen or other strong

oxidizing chemicals and should not be

used in applications requiring LOX

compatibility.

These products are neither tested nor




STORAGE AND SHELF LIFE

When stored at 77F (25C), these

Dow Corningsilicone compounds

have a shelf life of at least 60 months

from date of manufacture. Refer to

product packaging for Use By date.

PACKAGING

TheseDow Corningsilicone com-

pounds are supplied in 5.3-oz (150-g) tubes, 8-lb (3.6-kg) cans, 40-lb

(18.1-kg) pails and 440-lb (199.6-kg)

drums.

Dow Corning111 Valve Lubricant &

Sealant is also available in 14.1-fl oz

(400-g) cartridges.

SAFE HANDLING

INFORMATION

PRODUCT SAFETY INFORMATION


INCLUDED. BEFORE HANDLING,

READ PRODUCT AND MATERIAL

SAFETY DATA SHEETS AND

CONTAINER LABELS FOR SAFE

USE, PHYSICAL AND HEALTH


MATERIAL SAFETY DATA SHEET

IS AVAILABLE FROM YOUR

DOW CORNING REPRESENTATIVE,

OR DISTRIBUTOR, OR BY WRITING

TO DOW CORNING CUSTOMER

SERVICES, OR BY CALLING

(989) 496-6000.

LIMITED WARRANTY


READ CAREFULLY







substitution for customers tests to

ensure that Dow Cornings products





Dow Cornings sole warranty is that

the product will meet the Dow Corning


of shipment.





warranted.


DISCLAIMS ANY OTHER EXPRESS

OR IMPLIED WARRANTY OF

FITNESS FOR A PARTICULAR

PURPOSE OR MERCHANTABILITY.


LIABILITY FOR ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES.

WE HELP YOU INVENT THEFUTURE.

www.dowcorning.com


30/338

TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.

Method Test Unit Result

Dow Corning Dow Corning

Dow Corning 4 Electrical 111 Valve

7 Relase Insulating Lubricant &

Physical Compound Compound Sealant

CTM1 0176 Color White, White, White,

translucent translucent translucent

CTM 0191 NLGI #1 #2 #3

Penetration, worked 60 270 240 205

worked 100,000 322 279 217

CTM 0033A Bleed, 24 hr/392F (200C) percent 6.5 4.5 0.05

CTM 0033A Evaporation, 24 hr/392F (200C) percent 0.8 1.4 1.1

Service Temperature Range F (C) -40 to 400 -70 to 400 -40 to 400

(-40 to 204) (-57 to 204) (-40 to 204)

Melting Point None None None

CTM 0022 Specific Gravity at 77F (25C) 1.0 1.0 1.0

FDA Recognition, 21 CFR 175.300 Yes Yes Yes

ElectricalCTM 0112 Dielectric Constant,

at 100 Hz 2.85 2.98 2.88

at 100 kHz 2.83 3.01 2.95

CTM 0112 Dissipation Factor,

at 100 Hz


32/338

MOLYKOTE 41

GreaseThis is a silicone grease that can be used at temperatures higher

than those of normal silicone greases

APPLICATIONS" Ideal for use in oven conveyers, kiln dollies, molten salt evacuation pumps,

steam turbine regulator links, knife-edge power breakers, etc.



this product.

Standard* Parameter Unit Value

Appearance Black

Base oil viscosity at 25C mm2/s 316

JIS K 2220 Penetration (worked 60 times) mm/10 260 to 300

NLGI class 2

Service temperature range C -20 to 290

Density g/cm3 1.1

JIS K 2220 Drop point C None

MIL S 8660 Bleed (150C/24 hours) % 4.0

MIL S 8660 Evaporation (150C/24 hours) % 1.0

JIS K 2220 Water washout (38C/1 hour) % 0.5

ASTM D 2596 Four ball weld load (1500rpm/1m inute) N 1500

Maximum Dn value mm/

minute

75,000

*JIS: Japanese Industrial Standard.

ASTM: American Society for Testing and Materials.

MIL: Military Specification and Standards.

HOW TO USEClean points of application. As is usual

with lubricating greases, apply or fillby means of a brush, spatula, or

automatic lubrication device.

Do not use on painted surfaces. Do not

use on steel bearing under high loads.

HANDLING PRECAUTIONSThis pr

Molykote (R) in India from Project Sales Corp SMS +91-98851-49412

Documents