Molino de pet(ingles)

Crusher for plastic pettype

Team Number4

Rationale of thestudy

What is a pet mill or grinder?

• The history of the crusher goes back over 50 years. Over time, there have been improving the materials, designs and specialization has emerged as the type of shredding (wood, paper, plastic, stone, etc.).. But all the crushers are based towards the same goal which is to shred or cut into small all materials for easy recycling or disposal.

Types of crushers• Jaw crushers or double acting "Blake“

• Jaw crushers, single-acting

• Primary gyratory crusher

• Trituradoras giratorias secundarias y conos

• Roll crusher

Selection of Shredders

When choosing between the two types of devices, and rotating jaws, there are two factors to consider:

The maximum size of a fracture fragment

The production rate

DESIGN AND SPECIFICATIONS

• The creation of this type of machinery began with the need to combat pollution in the environment, pollute every year because more and more by the development of products made of plastic and this is a big problem for society, since all people when we finished eating a product with this type of material thrown into the environment.Techniques.

Parts of the mill

Consists of seven parts different from each other, and with different functions.

• 1 .- TABLE2 .- DEPOSIT BOX3 .- ROTOR4 .- TOP5 .- ENGINE6 .- CONTROL PANEL7 .- DIAGRAM OF FORCE

1.- Table

• This piece will allow the mill pet has greater stability.

2 .- DEPOSIT BOX

• This is where the material will fall and bruised.

3 .- ROTOR• This is one of the most important since they

will be responsible for the shredding of the plastic (PET).

4 .- TOP

• The plastic material come in and fall into the rotor, through this piece.

5 .- ENGINE

• This is going to be in charge of spinning the rotor, grind for this plastic material.

6 .- CONTROL PANEL• To be able to control some basic functions of

the mill, such as on, off, rotor speed, among others.

7 .- DIAGRAM OF FORCE

• This is the most important piece, as it will with which we control the control panel functions.

Conclusion• Since the beginning of a project can realize the

importance of plastic grinder for what they serve, realize that the work can get done faster and more efficient when crushed plastic.The use of this machinery is critical for businesses, that is why this machine was elaborated in order to have a more efficient performance for the company and that plastic garbage cheaper and more effective at the time of operation for operators safer.

Thanks for yourattention

• Referencesworks CitedSolid Waste Authority (ADS). (2002). Retrieved May 13, 2010, fromhttp://www.ads.gobierno.pr/secciones/reciclaje/reciclaje-plastico.htmNorton, R. L. (2009). Design of machinery. Synthesis and analysis of machines and mechanisms. Mexico, D.F.: McGraw-Hill.Juvera Vargas, T. (December 12, 2005). Zero waste: a sustainablealternative. Retrieved on April 27, 2010, Eco portal.net. The natural ecological directory: http://www.ecoportal.net/content/view/full/55022http://es.wikipedia.org/wiki/Trituraci% C3% B3nhttp://www.ads.gobierno.pr/secciones/reciclaje/reciclaje-plastico.htmwww.geocities.com/jalexp1/historiacercus.htmlwww.ecoportal.net/content/view/full/21043