Module04 Survey

8/13/2019 Module04 Survey

1/38

NOTES

Module 04

Survey

In this module, you learn how to use survey functionality in AutoCAD Civil

3D. This functionality enables you to automatically create pre-engineering

base plans and existing ground surface models directly from field survey data.

Survey data is required to gather information of the site prior to beginning the

design. This data typically consists of locating and identifying

coordinates/elevations of both spot and linework features. A Total Station or

GPS (global positioning satellite) survey are the most common tools for

collecting survey data.

Surveyors produce information upon which a design can be based. This

information is provided to site designers, and usually consists of a pre-engineering base plan, an existing ground surface model, and a reduced

coordinate point file.

Objectives

After completing this module, you will be able to:

Configure and identify the main components of the Civil 3D survey

environment.

Create a survey database and network.

Create figure styles to control the display of figures.

Create figure prefixes to assign figure styles to figures.

Describe the main characteristics of the Autodesk fieldbook file format.

Import a fieldbook file to Civil 3D.

Make changes to observation data in the survey database.

Create points and figures from survey data.


2/38

AutoCAD Civil 3D 2009 Education Curriculum NOTES

04-2

Notes

Data for this module resides in the \AutoCAD Civil 3D 2009 Education

Curriculum\Module04 - Survey\folder.

A fieldbook file is also provided for the Module. It is located in the same

folder and is called Survey.fbk.

Student Exercises

The following exercises are provided in step-by-step format. Open the Civil

3D program prior to beginning the lesson by double-clicking the Civil 3D icon

on your desktop.

If you are working in the Imperial system, you should use the drawing files

beginning with the letterI, while those working in the metric system should

use the drawing files beginning with the letterM. You are provided with adrawing for each exercise in the lesson.

The exercises in this module are as follows:

1. Configure the Civil 3D Survey Environment

2. Create the Survey Database

3. Create the Survey Network

4. Create Figure Styles

5. Create Figure Prefixes.

6. Review the Fieldbook File

7. Import the Fieldbook File

8. Edit Survey Data in the Survey Toolspace

9. Create Points and Figures


3/38

Module 04 - Survey NOTES

04-3

Survey

The Survey module focuses on the collection and reduction of pre-engineering

topographic and planimetric survey data. The survey data is used to create the

base plan and the existing ground surface model. Both of these elements arerequired by the engineer to complete the design.

The base plan is a plan view drawing that shows existing conditions. The base

plan typically consists of line work and symbols. The line work is used to

represent pavement edges, centerlines, sidewalk edges, gutter lines, ditches,

and other types of linear features. Symbols are used to represent spot features

such as catch basins, fire hydrants, and power poles.

The creation of the pre-engineering base plan and the existing ground surface

model is the responsibility of the survey organization or department. Those

groups involved with this work strive to automate the processes as much as

possible.

The following elements are required to automate the process:

Surveyors are consistent with their use of field codes that represent

specific features.

Surveyors apply field connectivity codes to automatically generate base

plan line work as the data is imported to AutoCAD Civil 3D. Examples

include Begin, End, Continue, C3, and Recall.

Base plan line work is assigned to layers automatically and can also be

defined as breaklines for the surface.

Point groups for surface modeling are predefined in the drawing template

(DWT). These filter invalid data from the surface model, such as pipe

inverts and tops of fire hydrants.

Description key sets associate point style and point label style to each

point.

Civil 3D represents survey data with a survey network object. The Survey

Network style, as with other Civil 3D object styles, controls the display of the

survey network.


4/38


04-4

Survey figures are used to display base plan line work. Figure styles control

the display of the base plan line work. Survey figures can also be converted to

breaklines for the existing ground surface model.


5/38


04-5

Key Terms

Survey Tab The Survey tab is positioned below the Prospector tab and the Settings tab in

the Toolspace window. You use the Survey tab to manage survey databases,

survey networks, survey data, and survey system settings.

Base Plan The base plan is the Civil 3D drawing that represents existing conditions

before the design begins. Base plans show existing features such as roads,

sewers, light poles, and manholes. These features are represented using Civil

3D point objects to represent spot features, and feature lines to represent linear

features. The engineer must become familiar with the existing conditions prior

to beginning the design work. Base plans are created directly from the survey

raw data file.

Observation

DataObservation data is the raw data format created from Total Station survey data-

collection equipment. Survey observations typically consist of a measured

horizontal angle, vertical angle, and slope distance record. The survey raw datafile also contains information such as control coordinates, height of instrument,

and height of rod. The final coordinates are calculated when the survey data is

imported to Civil 3D.

Reduced

CoordinatesReduced point coordinates are created from observation data. Reduced

coordinates typically refer to the northing and easting point coordinateattributes. Survey sideshot points are represented with angular measurements

in observation data. When imported to the drawing, sideshot point data is

converted to reduced coordinate point data.

Fieldbook

File

The fieldbook (FBK) file is an AutoCAD Civil 3D observation file. Different

brands of survey data collectors have their own observation data file format.These observation data files are converted to the AutoCAD Civil 3D fieldbook

files, which are then imported to AutoCAD Civil 3D. Coordinates are

calculated as fieldbook file data imported to the Civil 3D drawing.

Survey

DatabaseThe survey database is an external database that stores the observation data.

The survey database is populated with observation data when the fieldbook file

is imported. The location of the survey database defaults to the \Civil 3D

Projects\location on your hard drive. The survey database can be accessed

from any drawing to create base plan data.


6/38


04-6

Survey

NetworkThe survey network is a common collection of control points, noncontrol

points, directions, setups, and traverse adjustments. The survey network is the

graphical representation of the survey database observation data. A survey

network style controls the display of the survey network.

Figures Civil 3D figures are used to represent the base plan line work such as

pavement edges, centerlines, gutter lines, and sidewalks. In the field, surveyors

apply figure connectivity codes (Begin, End, Continue, and so on) to

automatically generate the base plan figures. Surveyors assign names to figures

using the Begin command. Figures can be converted to breaklines for surface

modeling. Figure display is controlled with a figure style. Figures are

organized in figure groups.

Figure Prefix

DatabaseThe figure prefix database assigns figure styles to survey figures. The figure

prefix database also assigns certain figures as breaklines for existing surface

models.


7/38


04-7

EXERCISE 1:CONFIGURE THE CIVIL 3DSURVEY ENVIRONMENT

In this exercise, you configure and become familiar with the Survey

Environment. The configuration of the workspace involves positioning the

Toolspace, turning off scroll bars and closing unwanted toolbars.

The following elements of the Toolspace window are used in the Civil 3D

survey environment:

Prospector tabshows survey networks and figures in the drawing.

Settings tabused to create survey network styles and figure styles.

Survey tabused to create and manage survey databases and survey

networks.

The Survey command can also be accessed from the menu and from thecommand line.

For this exercise open \Module 04Survey\I_Survey-EX1.dwg (M_Survey-

EX1.dwg).

1. Position Toolspace so that it is undocked on the left side of the screen.

2. Click Survey > Open Survey Toolspace.

3. In Toolspace, click the Survey tab.

A Survey tab appears on the Toolspace window.


8/38


04-8

4. Click the Prospector tab.

5. From the drop-down list at the top of Toolspace, click Active Drawing

View.

6. Click the plus sign (+) to expand the Survey tree.

Notice the Networks and Figures tree under the Survey tree.

Both the Networks and Figures trees are empty because there is no data

present. When you import data later in this module, these trees expand to

show the survey networks and figures.

Now you look at the styles used to display the survey networks and

figures.

7. In Toolspace, click the Settings tab.

8. At the bottom of the object list on the left side, expand all trees under the

Survey tree.

9. Click the plus signs (+) to expand the SurveyNetwork Styles and Survey

Figure Styles trees.


9/38


04-9

Network Styles control the display of the survey network. Figure Styles

control the display of the survey figures. Remember that survey figures are

used to represent the base plan line work.

10.Right-click the Network Style named Basic and click Edit.

11. In the Network Style dialog box, click the Components tab and review the

settings.

Here you can assign marker styles to known control points, unknown

control points, noncontrol points and sideshot points. This makes it easier

to identify the type of data you are working with.

You can change marker styles by expanding the GeneralMultipurpose

Styles tree on the Settings tab in Toolspace.

12.Click the Display tab.

You can control the display of the survey network by modifying the

Network Style.

13.Click OK.


10/38


04-10

14. In Toolspace, Settings tab, double-click the Standard Figure Style under

the Figure Styles tree.

15.Click the Markers tab on the Figure Styles dialog box.

You can assign marker styles to specific points on the survey figures.

16.Click the Display tab.

Notice that you can control the display properties of the figure

components.

17.Click OK.


19.The following trees are visible:

Survey Databases thelist of survey databases. A survey database iscreated in the next exercise.

Equipment Databasesdisplays the properties and values for the

survey equipment used to collect the data.

Figure Prefix Databasesassigns survey figures to layers and

identifies certain survey figures as breaklines.

20.Close the drawing and do not save the changes.


11/38


04-11

EXERCISE 2:CREATE THE SURVEY DATABASE

You must complete this exercise before moving on to the remaining exercises in this

module.

In this exercise, you create and set up the survey database. The survey database is aseparate file that contains the survey networks. Multiple users can access data in a

survey database to create survey drawings.

For this exercise open\Module 04Survey\I_Survey-EX2.dwg (M_Survey-

EX2.dwg).


2. Right-click Survey Databases and click New Local Survey Database

3. Enter City of Vancouver.

4. Click OK.

A survey database is added in Toolspace, Survey tab.


12/38


04-12

The Survey Database is physically represented with a folder structure on your

hard drive. The default folder location is \Civil 3D Projectsin your root drive.

You may have changed this when installing the software.

Next, change the units in the survey database.

5. In Toolspace, Survey tab, right-click the City of Vancouver survey database, and

click Edit Survey Database Settings.

6. Click the plus sign (+) to expand the Units tree.

7. Change the Distance units to Meter.


13/38


04-13

The survey data that you import later was collected in metric units. The survey

database is therefore set up to represent metric units. Civil 3D performs a unit

conversion by comparing the units of the drawing to those set in the survey

database.

8. Expand the other trees in the dialog box and review the other settings.

9. Click OK.

The survey database references metric units. If you are working in imperial, a

unit conversion occurs when survey data is imported.



14/38


04-14

EXERCISE 3:CREATE THE SURVEY NETWORK

The previous Exercise 2 must be completed before completing Exercise 3. You

must complete Exercise 3 before moving on to the other exercises in this

module.

In this exercise, you create the survey network. You can organize survey data

by creating survey networks within the survey database for different stages of

a land development project.

Survey networks are created for each of the following project phases:

Site Analysis

Boundary Survey

Boundary Analysis

Topographic Survey


EX3.dwg).


2. Right-click City of Vancouver and click Open Survey Database.

3. Right-click the Networks tree under the City of Vancouver survey

database and click New.


15/38


04-15

4. In the New Network dialog box, for Name, enter 41stAvenue.

5. For Description, enter Granville to Oak.

6. Click OK.

7. In Toolspace, Survey tab, click the plus sign (+) to expand the 41stAvenue

tree.

The survey network accommodates the following elements:

Control Points

Non-Control Points

Directions


16/38


04-16

Setups

Traverses

8. Close the drawing and do not save the changes.


17/38


04-17

EXERCISE 4:CREATE FIGURE STYLES

In this exercise, you create figure styles. Figures are used to represent the line work

automatically created from survey observation data. Examples of figures include pavement

edges, road crowns, bank tops, and bank bottoms. Figure styles control the display of

figures.

The following figure styles are created:

Existing centerline

Existing edge of pavement

Existing sidewalk

Existing driveway

For this exercise open \Module 04Survey\I_Survey-EX4.dwg (M_Survey-EX4.dwg).

1. In Toolspace, click the Settings tab.

2. Click the plus sign (+) to expand the Survey tree.

3. Click the plus sign (+) to expand the Figure Styles tree.

Create a figure style for the existing centerline.

4. Right-click the Figure Styles tree and click New.

5. Click the Information tab on the Figure Style dialog box.

6. Enter the name Existing Centerline.


18/38


04-18

7. Click the Display tab.

8. Click the lightbulb icon next to all the marker components to off, so just the Figure

Lines component are visible.

9. Change the Figure Lines layer to ST_CL.

10.Change the Figure Lines color to BYLAYER.

11.Click OK.

12.Using the same procedure, create the remaining figure styles using the following data:

Figure Name Layer Color

Existing Edge of Pavement ST_EOP Bylayer

Existing Sidewalk ST_CONC_WALK Bylayer

Existing Driveway ST_DWAY Bylayer

The Figure Stylestree of the Toolspace Settings tab is updated to show the new figure

styles.


19/38


04-19



20/38


04-20

EXERCISE 5:CREATE FIGURE PREFIXES

You must complete this exercise before moving on to the remaining exercises

in this module.

Figure prefixes are used when you:

Assign figure styles.

Identify certain figures as surface breaklines.

Identify certain figures as lot lines.

Assign figures to layers.

Assign figures to sites.

Figure prefixes are saved in a Figure Prefix Database.

Surveyors assign names to the figures when they are created in the field.

When survey observation data is imported, the figure name is matched against

the entries in the figure prefix database.

You create figure prefixes for existing centerline, existing pavement edge,

existing sidewalk, and existing driveways.


EX5.dwg).

1.

In Toolspace, click the Survey tab.

2. Click the plus sign (+) to expand the Figure Prefix Databases tree.

Create the existing centerline figure prefix.

3. Right-click Sample and click New.


21/38


04-21

4. For Name, enter CL.

5. For Breakline, select Yes..

6. Change the layer to ST_CL.

7. Change the Style to Existing Centerline.

8. Click OK.

9. Create the remaining figure prefixes using the following data:

Name Breakline Layer Style

EP Yes ST_EOP Existing Edge of Pavement

FW Yes ST_CONC_WALK Existing Sidewalk

BW Yes ST_CONC_WALK Existing Sidewalk

DW Yes ST_DWAY Existing Driveway

You are now finished with the figure prefix definitions. Notice you can

modify the figure prefix parameters directly from the Item View of theToolspace Survey tab.


22/38


04-22



23/38


04-23

EXERCISE 6:REVIEW THE FIELDBOOK FILE

In this exercise, you review the AutoCAD Civil 3D fieldbook file (FBK). The

fieldbook file contains the observation data from the field survey. Observation

data is usually collected using Total Station survey equipment.

Observation data from Total Station survey equipment consists of measured

horizontal angles, vertical angles, and slope distances. This data, when

combined with data representing control coordinates, height of instrument,

height of rod, and backsight angles, is reduced to real-world coordinates when

imported to the drawing.

Observation data (raw) file formats vary with the brand of data collector.

Fieldbook files are usually created from these brand-specific raw data files

using either TDS Survey Link or third-party software applications. The

fieldbook file format is a very common observation data file format used in the

land development industry.


EX6.dwg).

1. In Toolspace, Survey tab, right-click the City of Vancouver survey

database and select Open Survey Database.

2. In Toolspace, Survey tab, right-click the 41stAvenue network.

3. Click Edit fieldbook.


24/38


04-24

4. Browse to the \AutoCAD Civil 3D 2009 Education Curriculum\Module 04

Survey\folder.

5. Click Survey.fbkand click Open.

You may be prompted to select a text editor. An alternate method is to

browse to the folder and open Survey.fbkwith your favorite text editor.

An explanation of some of the observation statements follows:

NEZthe keyed in control coordinates. Typically these are the points

that the instrument is positioned over as well as the backsight point.

STNthe station setup command. This statement indicates the point

number the instrument is positioned on, the height of instrument, and a

description for the point.

AZspecifies the azimuth between two points.

BS

the point to which the instrument backsight is made.

PRISMsets the rod height.

F1 VAsideshot observation data consisting of a point number

measured horizontal angle, slope distance, vertical angle, and a

description.

BEGthe Begin statement to begin a figure. Other examples of


25/38


04-25

connectivity codes include End, Continue, C3 (to connect 3 points

with an arc), and Recall.

6. Review the entire contents of the fieldbook file in the text editor.

7. Close the text editor when you are finished.



26/38


04-26

EXERCISE 7:IMPORT THE FIELDBOOK FILE

You must complete this exercise before moving on to the remaining exercises in the

module.

In this exercise, you import the fieldbook file to the drawing. This results in the following:

Survey database is populated with observation data.

Survey network is created in the drawing.

When you import the fieldbook file, you have the option to create the points and figures

either during or after the import process.



2. Right-click City of Vancouver and select Open Survey Database.

3. Right-click on the 41stAvenue survey network.

4. Click Import Fieldbook.

5. Browse to the \AutoCAD Civil 3D 2009 Education Curriculum\Module 04 Survey\

folder.


27/38


04-27

6. Click Survey.fbkand click Open.

7. Set the properties in the Import Fieldbook dialog box as shown.

An explanation of a few of the settings follows:

Current Figure Prefix DatabaseThe figure prefix database contains the defined

figure prefixes; that is, the name of the figure.

Show Interactive GraphicsWhen toggled on, survey graphics are displayed as the

data is imported. When toggled off the graphical display is suppressed and theimport process is quicker.

Insert Network ObjectYou can view the entire survey network as a single

network object in the drawing. The network object is the graphical representation of

the survey observation data that resides in the survey database.

8. Click OK and watch as the survey data is imported to the drawing. This process takes a

few minutes.

The resulting survey network object displays as shown:


28/38


04-28



29/38


04-29

EXERCISE 8:EDIT SURVEY DATA IN THE SURVEY TOOLSPACE

The previous Exercise 7 must be completed before completing Exercise 8. You must

complete Exercise 8 before moving on to the last exercise in this module.

In this exercise, you review and learn how to work with the survey observation data inthe Survey Toolspace. When you change the observation data, the survey database is

updated. You then have the opportunity to update the survey network in the drawing.

Surveyors typically make corrections to the survey observation data before creating

survey points and figure objects.


EX8.dwg).



3. Click the plus signs (+) to expand the City of Vancouver, Networks, 41stAvenue

and Control Points trees.

4. Click Control Point #1. If you cannot see the point properties as shown below,

right-click Control Point #1 and click Show Properties.


30/38


04-30

Notice that you can change properties for the control points. Doing so results in

updates to the survey network, points, and figures. All other dependent data

(surfaces and profiles) are also updated.

5. Change the elevation to 80.405and press ENTER.

6. Click to save the changes.

7. Click the plus sign (+) to expand the Setups tree for the 41st

Avenue network.

Notice the different instrument setups that were done for the 41stAvenue survey.

A prism (target) height was entered incorrectly for the Station:3, Backsight:1

setup.

8. Right-click Setup Station:3, Backsight:1.

9. Click Edit Observations.

The observations (sideshots) from this setup are graphically highlighted.


31/38


04-31

The Panorama window appears and shows the Observations Editor.

You can control the column visibility and the order of display in the Observation

Editor.

10.Click and drag the column headers to control the column position as shown in the

previous image.

11.Click the divider line between the columns to control the column width.

12.Click the Target Height column header to sort the data by the Target Height Value.

You can also double-click the column header to sort the values in reverse order.

13.Scroll to the bottom so you can see the three observations with a target height of

2.650 (point number 355, 356, and 357). This target height was entered


32/38


04-32

incorrectly.

14.Using the scroll bar from the Observation Editor, scroll to the right and note the

elevations of these three points.

#35582.115

#356 - 82.250

#35782.343

The next step is to change the target height for these three points.

15.Press the Ctrl key and click the three points in the Panorama window.

16.Right-click the Target Height column header and click Edit.

17.Change the value of the target height to 2.55and press ENTER.

Civil 3D recalculates the observations. Notice that the data is now bold. The

changes need to be saved.

18.Click the Save icon in the Observation Editor to save the changes.

Notice that the data is no longer bold. This indicates that the changes have been

saved.

19.Click the green check mark icon in the Observation Editor to close the

Panorama window.

20.Click back to the Survey tab in Toolspace.

Notice that the 41st Avenue network has an exclamation mark next to it. This

means that the survey network needs to be updated.


33/38


04-33

21.Right-click 41stAvenue

22.Click Update Network.

23.Click the Survey Points tree.

24.Scroll down to point numbers 355, 356, and 357.

Notice that the elevations of the point data have updated based on the change to

the target height.

Notice that the Figures tree has an exclamation mark next to it. This means that the

figures need to be updated. The figure vertices contain elevation data, which may

have changed when the prism heights were updated.

25.Right-click the Figures tree and select Update figures.

Data residing in the survey database has been changed. The survey network and

figure data have been updated.



34/38


04-34

EXERCISE 9:CREATE POINTS AND FIGURES

You must complete the previous exercises in this module before completing Exercise 9. In

this exercise, you create survey points and figures from the survey database. Points and

figures are used to create the base plan and the existing ground surface model.

You also remove the survey network from the drawing to complete the exercise.




3. Click the Survey Points tree.

4. Right-click Survey Points.


35/38


04-35

5. Select Points menu > Insert Into Drawing.

The drawing is updated with point objects that can be used for surface modeling and

other design tasks.

6. Right-click Figures.

7. Click Insert into drawing.

The drawing is updated with the figures that represent the base plan line work.

The next step is to remove the survey network from the drawing.

8. Right-click 41stAvenue network.

9. Click Remove from drawing.

10. In the warning message dialog box, click Yes.

11.Graphically navigate the drawing and review the data.


36/38


04-36

Quest ions

1. What is a survey observation data file?

2. What does a surveyor typically create from observation data?

3. Who is this information delivered to in the site design process?

4. What types of features in Civil 3D are used to represent base plan line

work and breaklines for existing ground surface models?

5. What types of features in Civil 3D are used to represent spot features on

the base plan and locations for the existing ground surface model?

6. Explain how the survey database works.

7.

What are the primary functions of the figure prefix database?

8. What is the primary function of the survey network?

Answers

1. A survey observation data file contains all the survey field measurements.

A survey observation data file is also know as a raw data file. This

information usually is keyed-in control coordinates, instrument setup

locations, instrument height, backsight points and angles, rod heights and

sideshot data; which is measured with a horizontal angle, vertical angle,

and slope distance.

2. Surveyors create a model of existing conditions from observation data.

The model consists of a base plan drawing in plan view, an existing

ground surface model and points with reduced coordinates.

3. Surveyors deliver their finished product to designers. Designers then

create detailed design documents for construction. These contract

packages contain construction drawings, construction staking data, and

quantity reports.

4. Figures.

5. Points.

6. The survey database is an external file that is created prior to importing

survey data. The survey database stores survey observation data. Multiple

users can create their own survey drawings from data residing in a single

survey database.

7. The figure prefix database assigns figure styles to survey figures. The


37/38


04-37

figure prefix also identifies certain figures as existing ground surface

model breaklines.

8. The survey network is a graphical representation of the survey data. Youcan make changes to survey network data from the Survey Toolspace. The

survey network is updated after changes have been saved.


38/38


Module Summary

This module introduced you to survey functionality in AutoCAD Civil 3D.

Surveyors provide data to engineers upon which a land development design

can be based. This data represents existing conditions and consists ofreduced point coordinates, a plan view base plan drawing, and an existing

ground surface model.

Surveyors collect this data using Total Station and GPS survey data collection

equipment. Data recorded with Total Station data collectors is referred to as

observation data, which consists of actual field measurements. The Civil 3D

observation data file format is fieldbook (FBK). Points with coordinates are

created when observation data is imported to the Civil 3D drawing.

Module04 Survey

Documents