Munters combines state-of-the-art desiccant technology with dependability and long operating life for humidity control at virtually any temperature. Dry air protection improves readiness, reduces maintenance costs, improves diagnostics, reduces HAZMAT and increases productivity. With dehumidification, the following problems are eliminated in thousands of military applications: Electronic Failures: Advanced electronics are extremely sensitive to moisture. Dehumidification eliminates moisture formation, precluding downtime and malfunction. Corrosion: With dehumidification, moisture that causes rust and corrosion cannot condense on surfaces. Diagnostic “Ghosts”: Moisture is the leading cause of diagnostic “ghosts.” Using dehumidification protection greatly reduces their occurrence. Mold and Mildew: Dry air keeps surfaces moisture-free, therefore preventing the onset of mold and mildew. Munters Corporation, Air Treatment Division Phone +1 800 843 5360 / E-mail [email protected]/ munters.com DEW 50 with optional protective cage Model DEW 50 DEW 50 Mobile Dehumidifier • Process Air: Flow rates of 30-50 scfm. Nominal moisture removal: 24 lbs/24 hour at 83°F • Utilities: 115V/1 Phase 60Hz. Power required: 0.74kW; reactivation heater: 0.65kW • Electrical Controls: Socket for humidistat plug-in provided • Drive System: Desiccant rotor with belt drive • Reactivation Utility: Energy modulation independently controls heater power to limit energy consumption. Munters HoneyCombe ® Rotor Technology
2
Embed
Model DEW 50 - Carl Munters · Mold and Mildew: Dry air keeps surfaces moisture-free, therefore preventing the onset of mold and mildew. Munters Corporation, Air Treatment Division
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Munters combines state-of-the-art desiccant technology with dependability and long operating life for humidity control at virtually any temperature. Dry air protection improves readiness, reduces maintenance costs, improves diagnostics, reduces HAZMAT and increases productivity. With dehumidification, the following problems are eliminated in thousands of military applications:
Electronic Failures: Advanced electronics are extremely sensitive to moisture. Dehumidification eliminates moisture formation, precluding downtime and malfunction.
Corrosion: With dehumidification, moisture that causes rust and corrosion cannot condense on surfaces. Diagnostic “Ghosts”: Moisture is the leading cause of diagnostic “ghosts.” Using dehumidification protection greatly reduces their occurrence. Mold and Mildew: Dry air keeps surfaces moisture-free, therefore preventing the onset of mold and mildew.
DEW 50 Turnkey ConfigurationThe DEW 50 with turnkey configuration is a rugged (built of die-cast heavy aluminum casing), easy-to-install, dependable dehumidification solution for a wide range of applications such as combat vehicles, ISU and ISO containers, electronic shelters, ground-based radar systems, arms rooms and small supply spaces, or where electronics are housed or transported.
Advantages include: Protective Cage: (Optional) Contained in a damage-resistant aluminum cage, the unit bolts directly to walls, ceilings or floors.
Automatic Function: Humidistat with on/off function, provides (auto) control of desired humidity levels and economical operation.
Duct Transitions: Standard ductwork easily connects to direct dry air to needed location.
Easy to Maintain: Filters are changed without tools and disconnections.
Suggested Specification GuideDehumidifier shall be of the Honeycombe® desiccant wheel type capable of continuous operation in ambient temperatures ranging from -40°F to 120°F. Desiccant wheel shall have a Honeycombe® structure with the desiccant impregnation of the wheel of such quality that the process and reactivation process can be efficiently performed while in continuous operation without replenishment or replacement of the desiccant required for 30,000 hours or more under normal operating conditions. The wheel shall be positioned within the dehumidifier casing so as to allow for the smallest and lightest weight equipment design per 30-50 scfm of delivered process air flow. Fully assembled overall dimensions shall not exceed 10.75"(l) X 10.75"(w) X 15.25"(h) and 22 lb; or if turnkey configuration: 15.75"(l) X 13"(w) X 20"(h) and 35 lbs. Unit shall be energy efficient with total connected load not to exceed 0.74kW. Unit shall be shipped complete with reactivation heaters, filters, motors, fans, desiccant wheel drive unit and
Specifications
Utilities: DEW 50 = 115 V/1 Phase/60Hz
Process Volume: 50 scfm
Max Reactivation Volume: 10 scfm
Max Reactivation Heater: 0.65 kW
Max dBA: 70 or less (three feet from dehumidifier except in path of air flows)
DEW 50 Dimensions Table
ModelMax
Length (in.)
Max Width (in.)
Max Height
(in.)
Max Weight
(lb.)
Typical External Static Pressures (in. W.G.)
Process React
DEW 50 10 3/4 10 3/4 15 1/4 22 0.44 0.40
DEW 50 Turnkey Configuration
15 3/4 13 20 35 0.44 0.40
Right Side View
ReactivationAir Outlet 17⁄8" O.D.
ReactivationAir Inlet27⁄16" O.D.
31⁄4"
23⁄8"
13"
61⁄2"
11"
Left Side View
ProcessAir Outlet
17⁄8" O.D.
ProcessAir Inlet27⁄16" O.D.
ViconicsHumidistat
20"
51⁄8"
11"
61⁄2"
Front View3⁄8" Dia. thru
(8) Places
5⁄8"
165⁄8"
153⁄4"
141⁄2" Ref
41⁄4"
electrical controls. The filters for process air and reactivation air shall be easily accessible and not require the use of tools. Dehumidifier casing shall be constructed of aluminum for maximum strength, durability and corrosion resistance. Unit shall be painted with a polyurethane coating. Dehumidifier shall be capable of removing moisture from the air at various conditions. Equipment shall not employ chlorofluorocarbons which may pose an environmental threat to the ozone layer. Packaging and preservation is commercial. Equipment shall have a one year warranty.