This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
A5SL-1.06
psi in. wc Bar
PC 1.0 WT 5.0 UJ 1.0PE 2.0 WV 7.5 UK 1.5PG 3.0 WX 10 UL 2.0PJ 5.0 WZ 15 UM 3.0PL 7.5 XB 20 UN 5.0PN 10 XC 25 UP 7.5PP 15 XD 30 UQ 10PQ 3-15 XF 50 UR 15PR 20 XH 75 US 20PS 3-27 XK 100 UT 30PO 25 XM 150 UV 50PT 30 XO 200 UX 75PV 50 XQ 300 UY 100PX 75 XS 500 UZ 150PZ 100 XU 750 VA 200RB 150 XW 1000 VB 300RD 200 XY 1500 VC 350RE 250 YA 2000 VD 500RF 300 VE 700RH 500 VF 750RJ 600 UA 1000RK 750 UH 1400RM 1000 UB 1500RO 1500 UC 2000RR 2000 UD 3000RS 2500 UE 5000RT 3000 UF 7500RV 5000 UG 10KRX 7500RZ 10KSB 15KSD 20KSF 30KSH 50KSK 75KSM 100KSO 150KSR 200KSZ Non-Stand.
Miscellaneous MpaTA 760 mm Hg YG 0.05TC 30 in Hg YH 0.10JK 23 - 35inHgA YJ 0.15
YK 0.20Model 311 YL 0.25Option GR Only YM 0.50TG 0-5 through 0-15 YN 1.0TJ 0-6 through 0-30 YO 1.5TL 0-20 through 0-100 YP 2.0TN 0-60 through 0-300 YR 2.5TP 0-200 through 0-1000 YS 5.0TR 0-600 through 0-3000 YT 10.0TT 0-1000 through 0-5000 YU 15.0TV 0-4000 through 0-20000 YV 25.0
YW 40.0YX 60.0YY 100.0YZ 140.0
Pressure Type Codes2 Gauge3 Absolute4 Vacuum5 Differential6 Sealed Gauge (Hermetic)7 Gauge (Non-Hermetic Seal, ≥300 psi)8 Elevated (Suppressed Zero)9 Other
41 Blender Discharge Pressure Transmitter Model 340 Series
43 Hammer Union Models 170, 270,370
45 Temperature Transmitter Model 340T Serie
47 Flush Mount CANBus Pressure Transmitter Model 540 Series
49 Dual Pressure & Temperature CANBusTransmitter Model 543 Series
51 High Pressure High Temperature(HPHT) WECO Union
Models 170, 270,370 - “QX”
53 Temperature WECO Hammer Union Models 271, 371
55 Sub Sea Differential Model 754057 Sub Sea Pressure/Temperature Model 7500-9000
AEROSPACE59 Aerospace / Ground Support Precision Models 142, 242, 342
61 Flight Qualified Low Level Model 7100
63 Flight Qualified High Level Model 7200
65 Space Qualified High Level, Low Noise Model 7201
67 Flight Qualified Differential Model 7300
69 Aerospace Differential Model 7400
71 Submersible Model 7500
TABLE OF CONTENTSTABLE OF CONTENTS
A5SL-TOC.00 Rev W
TABLE OF CONTENTSTABLE OF CONTENTSPG# AEROSPACE MODEL
73 Sub Sea Differential Model 7540
75 Cryogenic Temperature Model 771077 Pressure for Cryogenic Environments Model 772073 Dual Cryogenic Temperature Model 7730
81 High Temperature Model 7770
83 Pressure for High Temp Environments Model 7780
85 Dual High Temp Pressure Transducer Model 7790
87 Temperature Model 7800
89 Dual Pressure & Temperature Model 7880
91 Flight In-Flow Lightweight Model 7900
93 Space Qualified In-FlowLightweight, Low Noise Model 7901
95 Flight Qualified Digitally CorrectedHigh Level Model 8200
97 Flight Qualified Digitally CorrectedDifferential Model 8300
99 Digitally Corrected Differential Model 8400
101 Digitally Corrected Submersible Model 8500
WASTE WATER / SUBMERSIBLES103 Submersible Level “Lift Station” Model 311-M351105 Submersible Level “Stainless” Model 313L107 Submersible Level “Titanium” Model 313L-NI
Standard Connections:• Process Connection: 1/4” NPT (F)• Electrical Connection: 36” long Belden 8723, 24 AWG, 4 conductorcable (or equivalent)
Electricals:• Input Impedance: (Model 111) 350 ohm nominal, full bridge• Input Current: (Model 211) 8mA nominal• Load Impedance:(Model 111) 50,000 ohms min. for less than 0.1% FSO attenuation.(Model 311) 1350 ohms max. at 36 Vdc & 750 ohms max. at 24 Vdc.
• Output Current:(Model 211) 2.0 mA max. for less than 0.1% FSO attenuation turndown.(Model 311) Option GR - 5:1 (3:1 for ranges ≤15 PSI)
Mechanicals:• Proof Pressure: 2 X FSPR (or URL) or 22,500 psi, whichever is less.• Burst pressure: Gauge/SG/Absolute - 5 X FSPR (or URL) or 23,000 psiwhichever is less.
• Vacuum: 5 X FSPR in gauge• Pressure Response: Less than 5 ms 10% to 90%• Weight: 10 oz. nominal, options may increase weight• Wetted Material: 316 & 17-4 PH SST• Enclosure Material: 316 SST• Mounting: Pressure port
Unless otherwise stated, these specifications are the standards to which the units arenormally constructed. Upgrades or alterations may be easily and readily accomplishedby the standard option code or by discussion with the factory. We invite your inquiry.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Output at 70° F:• Model 111: 3 mV/V - 3.5-15 Vdc excitation• Model 211: 0-5 Vdc - 9.0-40 Vdc excitation• Model 311: 4-20 mA - 9.0-36 Vdc excitation
Accuracy:Static error band includes Hysteresis, Non-Linearity, Non-Repeatability• Option B: ±0.5% BFSL• Option C: ±0.2% BFSL• Option D: ±0.1% BFSLResolution: Infinite (Practical minimum of 0.02% on 111, 211 & 0.06% on 311)
Zero Balance and FSO:• ±2% FSO at 70° F for each
Range Calibration:• Model 111: Resistance value provided on calibration card for 100% FSO
Insulation Resistance:• >10 megohms at 50 Vdc & at 70° F
Temperature Limits:• Compensated: -0 to 180°F• Operating: -20°F to 190°F• Storage: -65°F to +250°F• Effect on Zero & Span: < ±2.0% FSO/100°F at FSPR and/or URL
SZ OtherModel 311 w/option GR onlyTG 0-5 through 0-15TJ 0-6 through 0-30TL 0-20 through 0-100TN 0-60 through 0-300TP 0-200 through 0-1000TR 0-600 through 0-3000TT 0-1000 through 0-5000
GENERALGA Standardized output to ±0.5% FSOGB Alternate full scale outputs. Set to ±2%FSOGC Special calibration of a standard range )i.e. 5-10 point).GD Pressure overload 10X rated range, or 22,5000 psi.
whichever is less. Not available with GM, CW, GY, GF, GP,HX, JP, GR. Burst pressure 15x rated range or 23,000 psi,whichever is less.
GE Improved temp comp to ±0.5% FSO/100º F for zero & span.GG Alternate shunt cal (specify on SO)GH 100% ±0.5% Internal Shunt CalGJ Zero & span adjusts (±10% FSO, 211 & 311 only)GK Inconel wetted partsGL Oxygen cleaning.GM Submersible Housing, w/8’ Vented Submersible
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Alternate wiring available.
WIRING: 311Z, I, GI, AI
Pressure Format:• 0-5 thru 0-75,000 PSIS, PSIG, PSIA, PSIVAccuracy:(Includes Hysteresis, Non-linearity, Non-Repeatability)• Option B: ±0.50% FSO RSS• Option C: ±0.20% FSO RSS• Option D: ±0.10% FSO RSSZero Balance & FSO:• ±1.0% FSO at 70°F for eachLong Term Stability:• <±0.20% FSO for 6 months at 70°FTemperature Limits:• Compensated: 0 to 180°F• Operating: -40°F to 190°F (-40°F to 176°F for Intrinsically Safe Units)• Storage: -65°F to 250°F• Effect on Zero & Span: < ±2.0% FSO/100°F
• Output Current: 4-20 mA ±0.1% FSO at 70°F• Load Impedance: 750Ω max-24 Vdc• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°FMechanicals:• Proof Pressure: 2 X FSPR (50-15k psi) or 22,000 psi, whichever is less• Burst Pressure: 5 X FSPR (or URL) or 22,500 psi, whichever is less• Pressure Response: Less than 5 ms 10% to 90%Wetted Materials:• 316 & 17-4 PH SST / Enclosure 316 SST
Consult factory for options / Improved performance
For Explosion Proof RatingSee 111X/P, 211X/P, 311X/P Data Sheet
Explosion Proof & Intrinsically Safe Approvals
ApprovalsNOTE: Shown with “CF” option1/2” NPT Male Conduit
1.5” DIA
1 1/4” FLATS
1/4” NPT(F) STD PROCESS CONNECTIONOTHER PORTS OPTIONALLY AVAILABLE
GENERALGC Special calibration run (ie. 5 or 10 point)GD 10X overpressure or 22.5K psi, whichever is less [not with GY]GE Improved temp. comp. ( ±1.0% FSO/100°F zero and ±1.0% span)GF Expanded process temperature range, -65 to 250º F (±2%
FSO/100º F)GG Alt. shunt cal signal, not avail. w/311ZGJ Zero & Span adjustsGK Inconel wetted partsGP Hastelloy C-276 wetted partsGR 3:1 rangeability for ≤30PSI
5:1 rangeability for >30PSIHE Improved zero balance (±0.5% FSO)
* APPROVALS AVAILABLE:Z FM: Class I, II, III Division 1, GRPS A,B,C,D,E,F,G, T4 at Ta=80C
CSA: Exia, Class I, GRPS A,B,C,D Class II, GRPS E,F,G Class III,T4 at Ta=80C
I FM & CSA Class I, II, III Div. 1, GRPS A,B,C,0,E,F & G, Class I,Zone 0, AEx ia IIC, T5 at Ta=85C
AI ATEX CE0575 II 1 G Ex ia IIC T5IEC Ex ia II C T5
GI FM, CSA, ATEX & IEC combined
* SEE WEBSITE FOR CERTS
See Explosion Proof Data Sheet
Typical configurations (consult factory for more options)
INTRINSICALLY SAFE PRESSURE TRANSMITTERModels 311Z, I, GI, AIModels 311Z, I, GI, AI
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Pressure Format:• 0-50 thru 0-75,000 PSIS, PSIG, PSIA, PSIVAccuracy:(Includes Hysteresis, Non-linearity, Non-Repeatability)• Option B: ±0.50% FSO RSS• Option C: ±0.20% FSO RSS• Option D: ±0.10% FSO RSSZero Balance & FSO:• ±1.0% FSO at 70°F for eachLong Term Stability:• <±0.20% FSO for 6 months at 70°FTemperature Limits:• Compensated: 0 to 180°F• Operating: -40°F to 176°F• Storage: -65°F to 250°F• Effect on Zero & Span: < ±2.0% FSO/100°F for eachElectricals:• Excitation Voltage:(Model 111X/P) 3.5-15 Vdc(Model 211X/P) 10.5-32 Vdc(Model 311X/P) 9-36 Vdc(Model 311 N/AN/GN) 10-28 Vdc
• Input Impedance:(Model 111) 350Ω nominal(Model 211) 8 mA nominal
• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°FMechanicals:• Proof Pressure: 2 X FSPR (50-15k psi) or 22,000 psi, whichever is less• Burst Pressure: 5 X FSPR (or URL) or 22,500 psi, whichever is less• Pressure Response: Less than 5 ms 10% to 90%Wetted Materials:• 316 & 17-4 PH SST / Enclosure 316 SST
Consult factory for options / Improved performance.
For Intrinsically Safe ApprovalSee 311Z, I, GI, AI Data Sheet
GENERALGC Special calibration run (ie. 5 or 10 point)GD 10X overpressure or 22.5K psi, whichever is less [not with GY]GE Improved temp. comp. ( ±1.0% FSO/100°F zero and ±1.0% span)GF Expanded process temperature range, -65 to 250º F
(±2% FSO/100º F)GG Alt. shunt cal signalGK Inconel wetted partsGP Hastelloy C-276 wetted partsGS 0-10 Vdc output (14.2-32 Vdc excitation)HE Improved zero balance (±0.5% FSO)MD Explosion Proof Zero and Span adjust
* APPROVALS AVAILABLE:X FM only: Class I/II/III, Div 1, Grps A-G, T6 at Ta=40CP FM/CSA: Class I/II/III, Div 1, Grps A-G, T6 at Ta=40C
Zone 2 / Div 2
N FM: Class I, Zone 2 AEx nC IIC T5, Class I, Div. 2, Grp.A, B, C, D Class II, Grp. E, F, G, Class III T5, Ta = 80C(electrical connection dependent)CSA: Ex nA IIC T5, Ex nL IIC T5, Class I Div. 2 Grp. A, B, C, D ClassII Div. 2 Grp. E, F, G Class III T5, Ta=80C (elec. conn. dependent)
AN ATEX CE0575 II 3 G Ex nA IIC, Ex ic IIC T5, Ta=80C(all electrical connections)IEC Ex na IIC, Ex ic IIC T5, Ta=80C (all electrical connections)
GN FM, CSA, ATEX & IEC combined
* SEE WEBSITE FOR CERTS
For I.S. Approval see Intrinsically Safe Data Sheet - A5SL-11IS.00
Explosion Proof and IS Approvalscan be combined - Consult Factory
Typical configurations (consult factory for more options)
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
INDUSTRIAL77
1/4” NPT (F) WITH 7/8 HEXIS STANDARD
3.7” REF.
1.5” DIA
NEMA 4X CONNECTORWITH 36” CABLEIS STANDARD
GAUGE REFERENCED UNITS HAVEPOUROUS BREATHER BEHIND NAME-PLATE AND ARE NOT NEMA 4
SPIKE SERIES PRESSURE TRANSMITTERModels M-Spike, V-Spike, C-SpikeModels M-Spike, V-Spike, C-Spike
FEATURES:FEATURES:• Choice of outputs• Optional electric connectors and
pressure ports• Small size (1.5” OD x 3.75” long)
PRESSURE RANGES:PRESSURE RANGES:• From 0-100 through 0-15,000 psig
SPECIFICATIONS:SPECIFICATIONS:• Standard accuracy 0.2% FSO• 300% Proof pressure (22,500 max.)
A5SL-Spike.00 Rev D
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Pressure Type (Standard):• Gauge/Non-Hermetic Seal (0-300 PSI and above)• Gauge/Direct/Cable Vented (Below 0-300 PSI)Accuracy:• 0.2% (Includes Hysteresis, Non-Linearity, Non-Repeatability)Zero Balance:• ±1.0% FSO at 70°FOutput Span Tolerance:• ±1.0% FSO at 70°FTemperature Limits:• Compensated: 0°F to +180°F• Operating: -20°F to +190°F• Storage: -20°F to +250°F• Effect on Zero & Span: < ±2.0% FSO/100°FElectricals:• Excitation Voltage:(Model M-Spike) 3.5-15 Vdc(Model V-Spike) 9-40 Vdc (14.5-32 for 0-10V)(Model C-Spike) 9-40 Vdc
• Output at 70°F:(Model M-Spike) 3.0 mV/V(Model V-Spike) 0-5 Vdc(Model C-Spike) 4-20 mA
• Output Current:(Model V-Spike) 2.0 mA max. for less than 0.1% FSO attenuation.
• Input Impedance:(Model M-Spike) 5,000 ohms nominal, full bridge
• Input Current:(Model V-Spike) 8 mA nominal
• Load Impedance:(Model M-Spike) 50,000 ohms min. for less than 0.1% FSO attenuation(Model C-Spike) 1200 ohms max. 37 Vdc & 600 ohms max. at 24 Vdc
• Calibration Signal: Res. value provided on calibration card for 100% FSOMechanicals:• Proof Pressure: 3 X full scale pressure range or 22,500 psi,
whichever is less.• Burst Pressure: 5 X full scale pressure range or 23,500 psi,
PRESSURE RANGES:PRESSURE RANGES:• From 0-20,000 psi to 0-150,000 psi• From 0-1500 bar to 0-10,000 bar
ACCURACY:ACCURACY:• Accuracies to 0.2% FSO (RSS)(Non-Linearity, Hysteresis, Non-Repeatability)
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• Series B (Std): ±0.5% FSO RSS• Series C: ±0.2% FSO RSSZero Balance & FSO:• ±1.0% FSO at 70°F for eachLong Term Stability:• <±0.25% FSO for 6 months at 70°FResolution:• Infinite (.02% practical minimum)Temperature Limits:• Compensated: 0º F to +180º F• Operating: -20º F to +190º F• Storage: -65º F to +250º F• Effect on Zero & Span: Within ±2% FSO/100°F for each.Electricals:• Excitation Voltage:(Model 112) 3.5-15 Vdc(Model 212) 9-40 Vdc(Model 312) 9-40 Vdc
• Output at 70º F (FSO):(Model 112) 3.0 mV/V ±2%(Model 212) 5.0 Vdc ±2%(Model 312) 4-20 mA ±2%
• Input Current: (Model 212) 8 mA, nominal• Load Impedance:(Model 112) 50,000 ohms min. for less than 0.1% FSO attenuation(Model 312) 1350 ohms max. at 36 Vdc & 750 ohms at 24 Vdc
• Output Current: (Model 212) 2.0 mA max. for less than 0.1% FSO attenuation• Range Calibration Signal: Resistance value provided on calibration card for100% FSO
• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°F• Cable: 24 AWG - 36” longMechanicals:• Proof Pressure: 1.2 X full scale pressure or 160,000 psi, whichever is less.• Burst Pressure: 2 X full scale pressure or 180,000 psi, whichever is less.• Case material: Types 15-5 PH & 316 SST• Weight: 12 oz., nominalConnections:• Pressure Ranges: 20,000 to 60,000 psi - autoclave type F-250-C
75,000 to 150,000 psi - autoclave type F312-C150Wetted Materials:• 0-20,000 to 60,000 psi - 17-4 stainless steel• 0-61,000 to 0-150,000 psi - Vascomax 300
A5SL-12.00 Rev B
Some options will affect dimensions. Consult factory if important.
±0.5% FSOGB Alternate Electronic Output (Specify Zero and Span output
Values)GE ImprovedTtemperature. Compensation to ±0.5% FSO/100ºF
for Zero & Span respectively, from 0ºF to 180ºF.GF Expanded process temperature range, -65 to 250ºF
(±2.0% FSO/100ºF)GG Alternate shunt calibration signal (specify percentage FSO)GH Internal shunt calibration resistor, set to 100% ±0.5% FSOGJ Add Zero and Span Controls. (Approximately ±20% FSO
adjustment)GS 0-10 Vdc FSO, Model 212 only
(Requires 14.5-32 Vdc excitation)HE ±0.5% FSO zero balanceHL RFI Protection (for unit in proximity to radio transmitter)HR ±15 Vdc Excitation, Model 212GZ Customer special
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
INDUSTRIAL1111
SUBMERSIBLE LEVEL TRANSMITTERModel 313LModel 313L
FEATURES:FEATURES:• All welded, SST construction• Rugged, all encapsulated electronics• Leakproof• Many options to solve your problems
PRESSURE RANGES:PRESSURE RANGES:• From 0-3 thru 0-100 psig
ACCURACY:ACCURACY:• From ±0.1% FSO to ±0.5% FSO (RSS)(see specifications)
REDBLACKSHIELD
WIRING:
+EXC./SIGNAL-EXC./SIGNALOPEN
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:Static error band (Includes Hysteresis, Non-linearity, Non-Repeatability)• Series B: ±0.5% FSO RSS• Series C: ±0.2% FSO RSS• Series D: ±0.1% FSO RSSLong Term Stability: ≤ +0.5% FSO/yearResolution: InfiniteTemperature Limits:• Compensated: 0º F to +140º F• Operating: -40º F to +150º F• Storage: -40º F to +150º F• Effect on Zero & Span: Less than ±2.0% FSO/100°F at full scale
pressure range and/or upper range limit.Electricals:• Excitation Voltage: 12-40 Vdc• Output at 70º F: 4-20 mA ±2% FSO• Zero Balance: 4.0mA ±2% FSO at 70º F• Span: 16.0mA ±2% FSO at 70º F• Load Impedance: 1400 ohm maximum at 40 Vdc excitation.• Circuit Protection: Short Circuit - Indefinite, Reversed Wired - Indefinite• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°FMechanicals:• Proof Pressure: 2 X rated full scale pressure• Burst Pressure: 4 X rated full scale pressure• External Pressure: 500 psi maximum• Case Material: Type 316 SST• Pressure Response: ≤ 5ms to 90%• Position Effect: ±0.01% FSO for a 90° change in orientation• Calibration Orientation: Horizontal unless specified• Cycle Life: 1 million pressure cycles• Fluid Fill: 200 CS Dow Corning 200 (Silicon Oil)• Length: 6.2 *Depending on options• Diameter: .875Identification:• Etched onto housingConnections:• Pressure: PVC bullet nose• Electrical Cable Molded polyurethane jacket, 6 conductor with
breather tube, 24 AWG, 8’ long
313L
A5SL-313L.00
WETTED PARTS:- 316 SS Housing- Neoprene Grommet- Polyurethane Jacketed Cable- PVC Bullet Nose
Some options will affect dimensions. Consult factory if important.
INDUSTRIAL1212
Typical configurations (consult factory for more options)
ACCURACY:ACCURACY:• ±0.25% Option C• ±0.10% Option D
REDGREENBLACKSHIELD
WIRING:
+EXC./SIGNALGROUND-EXC./SIGNALSHIELD
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:• Option C: ±0.25% FSO RSS• Option D: ±0.1% FSO RSSLong Term Stability: ≤ +0.5% FSO / yearPressure Ranges:• 0-10 In. WC thru 50 In. WC, 0-1 PSIG thru 300 PSIGDiameter Housing Options:• Option NI-1 - 1.0 Diameter, Option NI-2 - 0.75 DiameterTemperature Limits:• Compensated: +30º F to +85º F• Operating: -10º F to +175º FTemperature Compensation:• Zero & Span (Standard): Less than ±2.0% FSO/100°F at FSPR & or URLElectricals:• Excitation Voltage (Vdc): 10-35• Output at 70º F (FSO): 4-20 mA ±2%• Zero Balance: 4mA ±2% FSO at 70º F• Span: 16mA ±2% FSO at 70º F• Load Impedance: 1400 ohm maximum at 40 Vdc excitation• Circuit Protection: Short Circuit - Indefinite, Reversed Wired - Indefinite• Resolution: InfiniteMechanicals:• Proof Pressure: 2X FSPR (or URL)• Burst Pressure: Full scale ranges up to 20 PSI = 10X, above 20 to 150
PSI = 4X, above 150 PSI = 2X• External Pressure: 500 psi maximum• Cycle Life: 1 million pressure cycles• Length: 6.75 In. (adding options will vary the length)• Weight: NI-1 = 7.6 oz. (excluding cable), NI-2 = 6.5 oz. (excluding cable)Identification:Etched onto housingConnections:• Process Connection: PVC bullet nose• Electrical Connection: Polyurethane or Tefzel Reinforced Cable with integral
vent tube (8 Ft. standard - other lengths available upon request)Wetted Material:• Titanium/Ceramic and Viton (excludes cable)
313L-NI
Some options will affect dimensions. Consult factory if important.
A5SL-313L-NI.00 Rev A
INDUSTRIAL
INDUSTRIAL1414
Typical configurations (consult factory for more options)
APPLICATIONS:APPLICATIONS:• Industrial OEM• Level & Depth• Water & Waste Water Treatment• Irrigation• Groundwater Testing• Food & Beverage
FEATURES:FEATURES:• Low Cost, High Accuracy, High Reliability• 0.5% FSO standard accuracy, 0.25% typical• Small size - 1” diameter, lightweight• Rugged, all welded construction• 1/2” NPT conduit thread standard• IP68 Rated• Operating Temperature -40°F to +180°F
PRESSURE RANGES:PRESSURE RANGES:• From 0-15 to 0-500 PSIG
REDGREENBLACKSHIELD
WIRING:
+EXC.+SIGNAL-EXC.OPEN
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• 0.5% (BFSL)Resolution:• Infinite (Practical = 0.06% FSO)Pressure Cavity Material:• 316 SST and InconelTemperature Limits:• Compensated: 0º F to 180º F• Operating: -40º F to 180º F• Storage: -40º F to 250º FTemperature Compensation:• Zero & Span: ±2.0% FSO/100°FElectricals:• Excitation Voltage:(Model 1102) 9.0 - 36 Vdc(Model 1103) 9.0 - 36 Vdc
• Output at 70º F: 0.5 Vdc ±2% FSO• Zero Balance: ±2.0% FSO• Span Tolerance: ±2.0% FSO• Insulation: 10 M Ohms at 50 Vdc Pin to CaseMechanicals:• Response Time: 5 ms• Proof Pressure: 1.5 X Full Scale Output• Burst Pressure: 3 X Full Scale OutputConnections:• Pressure: PVC bullet nose• Electrical Cable: 8’ Molded polyurethane jacket,6 conductor with breather tube.
1102
A5SL-1100.00 Rev B
WETTED PARTS:- 316 SS Housing- Neoprene Grommet- Polyurethane Jacketed Cable- PVC Bullet Nose
+EXC./SIGNALNC-EXC./SIGNALOPEN
1103
Some options will affect dimensions. Consult factory if important.
INDUSTRIAL1616
Typical configurations (consult factory for more options)
OPTIONS
ALTERNATE CONNECTOR OR CABLEAA NoneCZ Alternate cable or length
ALTERNATE PRESSURE PORTFJ 1/4 NPT MaleFL 1/8 NPT Male
GENERALGA Standardized FSOGB Alternate Electronic OutputJH Remote Zero & Span ControlsGZ Customer Special
MODELS1102 0-5 Vdc1103 4-20 mA
PRESSURE RANGE(PSI)
PRESSURE TYPES2 Gauge6 Sealed Gauge
PPPTPVPXPZRBRDRERFRH
0-150-300-500-750-1000-1500-2000-2500-3000-500
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
FEATURES:FEATURES:• Low Cost, High Reliability• 0.5% FSO standard accuracy,0.25% FSO optional
• Small size - lightweight• Rugged, all welded construction• NEMA - 4X/IP65 rated
PRESSURE RANGES:PRESSURE RANGES:• From 0-5 to 0-10,00 PSI
REDGREENBLACKSHIELD
WIRING:
+EXC.+SIGNAL-EXC.OPEN
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• 0.5% (BFSL)Resolution: Infinite (Practical = 0.06% FSO)Temperature Limits:• Compensated: 0º F to 180º F• Operating: -40º F to 180º F• Storage: -40º F to 250º FTemperature Compensation:• Zero & Span: ±2.0% FSO/100°FElectricals:• Approvals: CE EN 50 081-1• Excitation: 9-36 Vdc• Zero Balance: ±2% FSO• Span Tolerance: ±2% FSO• Insulation: 10 M Ohms at 50 VDC Pin to Case• Current Draw (1002): 3.5 mA Nominal 6mA maxMechanicals:• Response Time: 5 ms• Proof Pressure: 1.5 X Pressure range• Burst Pressure: 3 X Pressure range or 17,500 psig• Pressure cavity material: 316 SST and 17-4 SSTConnections:• Pressure: 1/4 NPT male (see options)• Electrical: 36” cableEnclosure:• Materials: 316 SST and nylon• Rating: NEMA - 4X, IP65Resistance to shock:• According to IEC 68-2-32: 1m (Free-fall onto steel plate)Vibration Resistance:• According to IEC 68-2-6 & 68-2-36: 20g
1002
A5SL-1000.00 Rev E
+EXC./SIGNALNC-EXC./SIGNALOPEN
1003
1/4 NPT (M)
7/8 HEX
0.870 DIA.DIN CONNECTORHIRSCHMANSTYLE 43650 - COPTION DA
2.300
Some options will affect dimensions. Consult factory if important.
INDUSTRIAL1818
Typical configurations (consult factory for more options)
OPTIONS
ALTERNATE CONNECTOR OR CABLEAA 36” wire leadsCF 1/2” NPT Male Nylon Conduit with 36” CableDA DIN 43650-C Connector with MateDC Turck M12
ALTERNATE PRESSURE PORTAA 1/4 NPT Male - StandardFL 1/8 NPT MaleFO G 1/4 (1/4 BSSP)LT SAE - 4 Male
*Consult factory for other options
MODELS1002 0-5 Vdc - .5 - 4.5 available1003 4-20 mA
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• ±0.25% FSO (±0.10% ±0.05% FSO optional)Temperature Limits:• Compensated: -40º F to 185º F Ambient• Operating: -40º F to 185º F Ambient (200º F Process)• Storage: -40º F to 250º F Ambient• Effect on Zero/Span: (*Accuracy dependent)Series C: ±1% FSO/100º FSeries D: ±0.5% FSO/100º FSeries E: ±0.25% FSO/100º F
Temperature Compensation:• Zero & Span: ±0.30% FSO (optional ±10% zero or span adjust available)Electricals: (*Consult factory for options available)• Supply Voltage:
(Model 241 & Model 341) 9-32 Vdc• Output Signal:
(Model 241) 0-5 Vdc (other outputs available)(Model 341) 4-20 mA
• Load Resistance:(Model 241) 100k ohm minimum(Model 341) 1150 ohms maximum at 32 Vdc
• Shunt Calibration: Optional isolated shunt cal.(Any percent of full scale desired)
• Circuit Protection: Reverse polarity protected. Output may be groundedindefinitely. Over voltage protection to 1kV for <1m Sec.
• Connection: Bendix PTIH-10-6P (Others available)• Response time: ≤1m Sec (Typical)Mechanicals: (*Consult factory for options available)• Process Connection: 7/16-20 M• Proof Pressure: Typically 3 X range or 22,500 PSI max
(varies with pressure range)• Burst Pressure: 5x’s range or 22,500 PSI max• Pressure cavity material: 316 SST and 17-4 SSTMaterial Construction:• Wetted Parts: ≤500 PSI: 316 SST, ≥600 PSI: 15-5PH & 300 series SST• Housing: 300 Series SST
Ø1.00
.875HEX
BREATHER HOLE(WHEN REQ’D)
7/16-20 UNFMS33656-04
OPTIONALZERO+SPAN
ADJUST
6-PINCONNECTOR
PTIH-10-6P
3.37SOME OPTIONS MAY
EFFECT LENGTH
Some options will affect dimensions. Consult factory if important.
A5SL-41.00 Rev B
A/1 REDB/2 GREENC/3 WHITED/4 BLACKE/5 BLUEF/6 BROWN
+EXC.+SIGNALNC-EXC./SIGNALNCNC
WIRING:
+EXC. / SIGNALNCNC-EXC./SIGNALNCNC
241 341
.55
INDUSTRIAL2020
Typical configurations (consult factory for more options)
OPTIONS (Consult factory for more options not listed)
GENERALGC Special calibration run (ie. 5 or 10 point)GG Alt. shunt cal signalGJ Zero & Span adjustsGS 0-10 Vdc output (14.2-32 Vdc excitation)GE Improved Temperature Compensation
(±0.25% FSO/100º F)
MODELS241 0-5 Vdc (Other VDC outputs available)341 4-20 mA
ACCURACYC ±0.25% FSOD ±0.10% FSOE ±0.05% FSO
PRESSURE RANGE(PSI)
PRESSURE TYPES(May be affected by Altitude/Barometric pressure consult factory)
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• Within ±0.2% FSO, RSS, ±0.1% FSO, RSS AvailableTemperature Limits:• Compensated: -40º F to +250º F• Operating: -65º F to +275º FTemperature Compensation:• Zero & Span: Within ±0.0075% FSO/ºFElectricals:• ExcitationVoltage:(Model 142) 3.5-15 Vdc(Model 242) 9-40 Vdc(Model 342) 9-36 Vdc
Developed specifically for the harsh operating environmentsencountered in ground support testing. These units feature thelatest blend of mechanical and circuit technology to achievesuperior ruggedness, accuracy, and fatigue life. When you needassistance with your pressure application, call GP:50.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:Static error band (Includes Hysteresis, Non-Linearity, Non-Repeatability)• Series A: ±1.0% FSO (RSS)• Series B: ±0.5% FSO (RSS)• Series C: ±0.2% FSO (RSS)
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
DIFFERENTIAL PRESSURE2626
OPTIONSAA None (standard connector)
ALTERNATE CONNECTOR OR CABLECA Bendix PTIH-10-6P (Mate:PTO6E-10-6S [SR], not supplied)CB Bendix CF3102E-14S-6P(Mate: CF 3106E-14A-6S (not supplied))CE Terminal BlockCF 1/2” NPT(M) thread w/24” potted leads. (Std. on exp. proof models)CH NEMA-4X cable, 8’ vented polyurethane jacket cableCJ DIN 43650 (includes mate)CL 1/2” NPT (M) conduit, 2’ vented polyurethane jacket cableCO Junction Box (thermocouple type) and Terminal BlockCT Teflon jacketed cable, Tefzel used on submersible units,
GENERALCW Submersible non-vented cable (max. 500 psi external)DE IP-67 (NEMA-6) vented polyurethane cable, neoprene grommetGA Standardized Output to ±0.5% FSOGB Alternate Full Scale, Outputs that are non-standardGE Improved Temp. Compensation to ±0.5% FSO/100°F for Zero & SpanGF Expanded process temperature range, -65 to 250°F (±2% FSO/100°F)GG Alternate Calibration Resistor SignalGH Internal Calibration Resistor, set to 100% ±0.5% FSOGJ Zero & Span Controls (Approximately ±20% FSO) 215 & 315 onlyGL Cleaned for Oxygen ServiceGS 0-10 Vdc FSO, Model 215. (Requires 16-40 Vdc excitation)HK NEMA-4X ratingHL RFI Protection (for unit in proximity to radio transmitter).HM 10,000 psi Base Pressure Flange Girdle.
Proof pressure 10 x full scale range or 10,000 psi, whichever is less.Burst pressure 15 x full scale range or 10,500 psi, whichever is less.
HR ±15 Vdc Excitation, Model 215MD Zero and Span Controls for Explosion-Proof Units.MS Bi-Directional Differential Pressure allows for both positive & Negative signal
(Model 315 has a 12 mA zero)
MODEL:115 3 mV/V215 0-5 Vdc315 4-20 mA215X 0-5 Vdc Explosion Proof315X 4-20 mA Explosion Proof315Z 4-20 mA Intrinsically Safe
ACCURACY:A - 1.0% FSO / B - 0.5% FSO / C - 0.2% FSO
PTPVPXPZRBRDRE
305075100150200250
RFRHRJRKRMRORR
300500600750100015002000
RSRTRVRWRXSZ
25003000**5000**6000**7500**Other
Some options will affect dimensions. Consult factory if important.
PRESSURE RANGE (PSI): **Available with option HM only
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
DIFFERENTIAL PRESSURE2727
A5SL-16.00 Rev C
ZERO & SPANADJUST
1/2 NPT CONDUITOPTION CF
W/ 36” LEADS
1/4 NPTTYP.
2.30
3.00
2.75
1.00
1.50 Ø
Some options will affect dimensions. Consult factory if important.
LOW RANGE, HIGH LINE DIFFERENTIAL PRESSURE TRANSMITTERModels 216, 316Models 216, 316
FEATURES:FEATURES:• Wet-wet DP• High Line Pressure rating• Compact size• 316 SST wetted parts• Fast frequency response
PRESSURE RANGES:PRESSURE RANGES:• From 0-5 to 0-2,000 in. wcdand 0-1 to 0-200 psi
LINE PRESSURE:LINE PRESSURE:• 2000 psi standard, others available• 500 psi on Welded Port option LB
ACCURACY:ACCURACY:• See options
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-linearity, Non-Repeatability)• Option B Standard: ±0.5% FSO (RSS)• Option C Standard: ±0.2% FSO (RSS)• Option D Standard: ±0.1% FSO (RSS)Base (Line) Pressure:• 2000 psi, maximum / 3000 psi, maximum, options FP &LA, 500 psi, maximum, option LBStatic Line Shift:• Less than ±1% FSO/1000 psi for ranges 0-21” wc & higher• Less than ±2% FSO/1000 psi for ranges 0-20” wc & lowerOrientation Shift: (90º)• Zero: ±1 in wcResolution:• Infinite (0.02% FSO practical minimum)Temperature Limits:• Compensated: +70º F to +180º F• Operating: 0º F to +180º F• Storage: -20º F to +200º F• Effect on Zero & Span: < ±2.0% FSO/100°F for eachElectricals:• Supply Voltage:(Model 216) 10.2-42 Vdc(Model 316) 13-37 Vdc
• Output at 70°F:(Model 216) 0±5 Vdc FSO(Model 316) 4-20 mA FSO
• Output Loading:(Model 216) 3000 ohms, minimum
• Load Impedance:(Model 316) 3000 ohms, minimum
• Zero Balance / Span: Adjustable to ±20% FSOMechanicals:• Response Time: <100 milliseconds for 90% FSO/70ºF• Frequency Response: Flat to 10HZ• Stability: Less than ±0.25% FSO/6 months• Silicon Oil fillProof Pressure at 70°F:• 1000 psi single ended is standard / 1000 psi single endedfor options FP & LA / 500 psi single ended for option LB
Burst Pressure at 70°F:• 4000 psi is standard / 5000 psi for options FP & LA/750
psi for option LBWeight:• 5.4 lbs. normal (std.) / 6.5 lbs. options FP & LA/2.0 lbs.option LB
Connections:• Pressure: 1/4” NPT (F)Electrical: Cable (24 AWG) 36” long
ALTERNATE PRESSURE PORTFA MS33649-4 (F)FC 3/8” NPT (F)FH 1/8” NPT (F)LA 3,000 psi flanges, (std. pressure port)LB Integral welded process ports (500 PSI Max line & proof) 1/4” NPT F-Std.FZ Non-Standard Pressure Port
GENERALGB Alternate Electronic Output (specify Zero & Span output values)GE Improved Temp. Compensation to ±0.5% FSO/100ºFGH 100% Shunt CalibrationGL Cleaned for Oxygen ServiceMH 3:1 Max Ranging, (Model 316 only)MS Bi-Directional Differential Pressure, (316 - 12 mA @ Zero PSID)GS 0-10 Vdc FSO, (Model 216 Requires 16-42 Vdc excitation)HL RFI ProtectionHZ Teflon O-ringLO 10-32 Bleed Screw both ports
LOW RANGE, HIGH LINE DIFFERENTIAL PRESSURE TRANSMITTERModels 216, 316Models 216, 316
Typical configurations (consult factory for more options)
MODEL216 0-5 Vdc316 4-20 mA216X 0-5 Vdc FM Explosion Proof316X 4-20 mA FM Explosion Proof216P 0-5 Vdc FM & CSA Explosion Proof316P 4-20 mA FM & CSA Explosion Proof
ACCURACYB 0.5% FSOC 0.2% FSOD 0.1% FSO
PRESSURE RANGEIN. WCDWTWVWXWZXBXDXFXHXK
57.5101520305075100
XMXOXQXSXUXWXYYASZ
150200300500750100015002000Non-Stand.
PCPEPGPJPLPPSZ
12357.515Non-Stand.
PRPOPTPXPZRBRD
20253075100150200
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
FEATURES:FEATURES:• High accuracy(see specifications on reverse side)
• 3,625 PSI static line & single sidedoverpressure protection
• 4-20 mA output, available with or withoutHART® communication
• 30:1 turn down• Push button adjust with LCD display• Exotic wetted parts available
PRESSURE RANGES:PRESSURE RANGES:• From 0-0.5” WC through 0-3000 psid
APPLICATIONS:APPLICATIONS:• Chemical processing• Sanitay tank level• Tank level• Water Treatment plants
A5SL-GPIDP.00
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Positive values indicate HI side of sensor at the high pressure, and negative values indicate LO side of sensor at the high pressure.The upper span and range limits may be reduced by some options, consult factory.Suppressed or elevated zero ranges are acceptable as long as span and range limits are not exceeded.
Signal/Accuracy: (Includes Linearity, Hysteresis and Repeatability)
Code Electronic Signal Configured Signal Common Span AccuracyA 4-20mA 4 to 20 mA Linear Sq. Root ± 0.20%
T 4-20mA w/HART® Digital Linear ±0.050%Digital Sq. Root ±0.080%
4 to 20 mA Linear ±0.075%4 to 20 mA Sq. Root ±0.105%
Ranging may affect accuracy, consult factory for exact specifications.
Static Line Shift: (Zero and span shift for a 1000 PSI change in static pressure)
Zero shift can be calibrated out by zeroing at nominal line pressure.* Zero and span shift for a 500 PSI change in state pressure for Span Codes A & D.
Temperature Compensation: -20° F to +180° FProcess Temperature Range: -50° F to +250° F (silicone fill fluid)Ambient Temperature Range: -40° F to +185° F
*Span Code A specification applies to a transmitter with a stainless steel sensor only.
LCD Indicator:Operative limits of the standard indicator are -20° F and +185° F (-29° C and +85° C), normal operating limits are - 4°F & +185°F(-20° C & +82° C). The LCD indicator will not be damaged at any temperature within the “Storage and Transportation Limits”,updates will be slower and readability decreased at temperatures outside “Normal Operating Conditions”.
Environmental Protection:With topworks cover on and conduit entrances sealed, transmitter is dust tight per IEC IP66 and provides environmental protectionof NEMA type 4X.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Alternate wiring available.
WIRING: 311Z, I, GI, AI
Pressure Format:• 0-5 thru 0-75,000 PSIS, PSIG, PSIA, PSIVAccuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• Option B: ±0.50% FSO RSS• Option C: ±0.20% FSO RSS• Option D: ±0.10% FSO RSSZero Balance & FSO:• ±1.0% FSO at 70°F for eachLong Term Stability:• <±0.20% FSO for 6 months at 70°FTemperature Limits:• Compensated: 0 to 180°F• Operating: -40°F to 190°F (-40°F to 176°F for Intrinsically Safe units)• Storage: -65°F to 250°F• Effect on Zero & Span: < ±2.0% FSO/100°F
• Output Current: 4-20 mA ±0.1% FSO at 70°F• Load Impedance: 750Ω max-24 Vdc• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°FMechanicals:• Proof Pressure: 2 X FSPR (50-15k psi) or 22,000 psi, whichever is less• Burst Pressure: 5 X FSPR (or URL) or 22,500 psi, whichever is less• Pressure Response: Less than 5 ms 10% to 90%Wetted Materials:• 316 & 17-4 PH SST / Enclosure 316 SST
Consult factory for options / Improved performance.
For Explosion Proof RatingSee 111X/P, 211X/P, 311X/P Data Sheet
GENERALGC Special calibration run (ie. 5 or 10 point)GD 10X overpressure or 22.5K psi, whichever is less [not with GY]GE Improved temp. comp. ( ±1.0% FSO/100°F zero and ±1.0% span)GF Expanded process temperature range, -65 to 250º F
(±2% FSO/100º F)GG Alt. shunt cal signal, not avail. w/311ZGJ Zero & Span adjustsGK Inconel wetted partsGP Hastelloy C-276 wetted partsGR 3:1 rangeability for ≤30PSI
5:1 rangeability for >30PSIHE Improved zero balance (±0.5% FSO)
* APPROVALS AVAILABLE:Z FM: Class I, II, III Division 1, GRPS A,B,C,D,E,F,G, T4 at Ta=80C
CSA: Exia, Class I, GRPS A,B,C,D Class II, GRPS E,F,G Class III,T4 at Ta=80C
I FM & CSA Class I, II, III Div. 1, GRPS A,B,C,0,E,F & G, Class I,Zone 0, AEx ia IIC, T5 at Ta=85C
AI ATEX CE0575 II 1 G Ex ia IIC T5IEC Ex ia II C T5
GI FM, CSA, ATEX & IEC combined
* SEE WEBSITE FOR CERTS
See Explosion Proof Data Sheet
Typical configurations (consult factory for more options)
INTRINSICALLY SAFE PRESSURE TRANSMITTERModels 311Z, I, GI, AIModels 311Z, I, GI, AI
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
OIL/GAS/HAZARDOUS3333
Model 543 SeriesModel 543 SeriesDUAL PRESSURE & TEMPERATURE CANBUS TRANSMITTER
FEATURES:FEATURES:• Pressure & temperature in one device• Reduces IO Points• All welded, rugged construction
CANBus J1939 Protocol offers:• Adjustable Bit Rate• Adjustable Message Output Rate• System Output Re-Zero• Digital Shunt• Adjustable Message Addresses• Custom Message Streaming• High Stability option provides; Higher resolution, noise reduction,better thermal performance & long term stability
PRESSURE RANGES:PRESSURE RANGES: (Consult factory for higher ranges)
• 0-50 Thru 0-1,000 PSI
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Electricals:• Standard Excitation Voltage: 5.6 -18 VDC• Optional Expanded Excitation Voltage: 4.5-37 VDC• Current Draw: 40 mA• Output: CANBus J1939 (Consult factory for specifics)• Standard Resolution: 16 Bit• Optional Improved Resolution: 18 Bit• Standard Connection: ½” NPT Male Conduit with 36” leads• 4 Wire Device: +/- Signal & +/- Power, Case Ground
Mechanicals:• Proof Pressure: 2x FSO (Optional 5 X)• Burst Pressure: 5x FSO• Case Materials: 300 series SST• Wetted parts: 17- 4PH SSTT• Process Connection: ½” NPT Male with temp probe
Protocol: (Consult factory for more detail)• Standard Can protocol - 11 bit CAN Identifiers• Optional Extended Can 2.0B -29 bit CAN Identifiers• Standard messaging: Pressure, Temperature & mV/V Sensor.Up to four messages can be streamed
Accuracy - Pressure Measurement: (Static Error Band)• Series B: +/- 0.5 % FSO• Series C: +/- 0.25 % FSO• Series D: +/- 0.1 % FSO• Series E: +/- 0.05 % FSO
Temperature Compensation: (Pressure)(expanded & improved options available)• Compensated Range: 30° F -185° F• Operating Range: Process: -40° F to +250° F
Ambient: -40° F to +185° F• Storage Range: -65° F to +250° F• Temperature Effect on Zero: +/-0.5 % FSO/100° F• Temperature Effect on Span: +/-0.5 % FSO/100° F
Temperature Measurement:• Standard Accuracy: +/- 0.5° C from -55 to +125° C (-70 to 257° F)• Expanded Accuracy: +/- 1.0° C from -40 to 205° C (-40 to 400° F)• Standard Resolution: 0.0625° C• Expanded Resolution: 0.5° C
OIL/GAS/HAZARDOUS3434
Some options will affect dimensions. Consult factory if important.
Temperature Range00 0° F to 250° F01 -40° F to 250° F02 -40° F to 185° F03 0° F to 300° F
Probe Length (Consult factory for more measurements)A .75B 1.00C 1.25D 1.50
ELECTRICAL CONNECTOR OR CABLECA PTIH-10-6P (Mate PT06E-10-6S [SR], not included)CF 1/2” NPT (M) Thread with 3FT leadsDK 4 Pin SST Glenair Equal
PRESSURE PORTSIM 1/2” NPT Male (Flush)
MODEL543 CANBus (J1939)
STATIC ACCURACYB +/- 0.5 % FSOC +/- 0.25 % FSO
PRESSURE RANGE(PSI)
PRESSURE TYPE2 Gauge3 Absolute6 Sealed Gauge
Typical configurations (consult factory for more options)
Model 543 SeriesModel 543 SeriesDUAL PRESSURE & TEMPERATURE CANBUS TRANSMITTER
PVPXPZRBRD
0-150-750-1000-1500-200
D +/- 0.1 % FSOE +/- 0.05 % FSO
RERFRHRKRM
0-2500-3000-5000-7500-1,000
NOTE:Specifications reflect standard product, improved performance / mechanical options available. Modifications may alter specs, consult factory for more information.
G 1.75H 2.00J 2.25K 2.50
1.5” DIA
1 1/4” FLATS
1/4” NPT(F) STD PROCESS CONNECTIONOTHER PORTS OPTIONALLY AVAILABLE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Pressure Format:• 0-50 thru 0-75,000 PSIS, PSIG, PSIA, PSIVAccuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• Option B: ±0.50% FSO RSS• Option C: ±0.20% FSO RSS• Option D: ±0.10% FSO RSSZero Balance & FSO:• ±1.0% FSO at 70°F for eachLong Term Stability:• <±0.20% FSO for 6 months at 70°FTemperature Limits:• Compensated: 0 to 180°F• Operating: -40°F to 176°F• Storage: -65°F to 250°F• Effect on Zero & Span: < ±2.0% FSO/100°F for eachElectricals:• Excitation Voltage:(Model 111X/P) 3.5-15 Vdc(Model 211X/P) 10.5-32 Vdc(Model 311X/P) 9-36 Vdc(Model 311 N/AN/GN) 10-28 Vdc
• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°FMechanicals:• Proof Pressure: 2 X FSPR (50-15k psi) or 22,000 psi, whichever is less• Burst Pressure: 5 X FSPR (or URL) or 22,500 psi, whichever is less• Pressure Response: Less than 5 ms 10% to 90%Wetted Materials:• 316 & 17-4 PH SST / Enclosure 316 SST
Consult factory for options / Improved performance.
For Intrinsically Safe ApprovalSee 311Z, I, GI, AI Data Sheet
GENERALGC Special calibration run (ie. 5 or 10 point)GD 10X overpressure or 22.5K psi, whichever is less [not with GY]GE Improved temp. comp. ( ±1.0% FSO/100°F zero and ±1.0% span)GF Expanded process temperature range, -65 to 250º F
(±2% FSO/100º F)GG Alt. shunt cal signalGK Inconel wetted partsGP Hastelloy C-276 wetted partsGS 0-10 Vdc output (14.2-32 Vdc excitation)HE Improved zero balance (±0.5% FSO)MD Explosion Proof Zero and Span adjust
* APPROVALS AVAILABLE:X FM only: Class I/II/III, Div 1, Grps A-G, T6 at Ta=40CP FM/CSA: Class I/II/III, Div 1, Grps A-G, T6 at Ta=40C
Zone 2 / Div 2
N FM: Class I, Zone 2 AEx nC IIC T5, Class I, Div. 2, Grp.A, B, C, D Class II, Grp. E, F, G, Class III T5, Ta = 80C(electrical connection dependent)CSA: Ex nA IIC T5, Ex nL IIC T5, Class I Div. 2 Grp. A, B, C, D ClassII Div. 2 Grp. E, F, G Class III T5, Ta=80C (elec. conn. dependent)
AN ATEX CE0575 II 3 G Ex nA IIC, Ex ic IIC T5, Ta=80C(all electrical connections)IEC Ex na IIC, Ex ic IIC T5, Ta=80C (all electrical connections)
GN FM, CSA, ATEX & IEC combined
* SEE WEBSITE FOR CERTS
For I.S. Approval see Intrinsically Safe Data Sheet - A5SL-11IS.00
Explosion Proof and IS Approvalscan be combined - Consult Factory
Typical configurations (consult factory for more options)
FEATURES:FEATURES:• 4-20 mA with HART• 50 Through 100,000 PSI Ranges in PSISG, PSIA & PSIV• 4-20 mA Loop Powered• 5:1 Ranging• Secondary Containment• FM/CSA Explosion Proof available (411X/411P),Class I, II, III, Division I, II, Groups A, B, C, D, E, F & G
APPLICATIONS:APPLICATIONS:• Off Shore Rigs and Pumping Platforms• Pipelines and Processing• Shipboard and Marine Applications• Plastics and paper
REDBLACKGREENDRAIN WIRE
WIRING:+EXC./SIGNAL-EXC./SIGNALCASE GROUND
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
411
Approvals
Some options will affect dimensions. Consult factory if important.
A5SL-411.00 Rev B
This rugged, harsh-environment transmitter is small in size and designed to solve your worst weather nightmare. GP:50 Model 411 featuresHART communications protocol and microprocessor based electronics in a small, rugged package. HART communication allows simplersystem commissioning and start up, while digital compensation provides enhanced accuracy and rangeability.
Because HART allows simultaneous analog and digital communication, this instrument is fully compatible with existing analog systems.Communication is most commonly done with a HART hand-held communicator, but can also be done with commercially available PC-basedsoftware. All-welded and hermetically sealed, it can be submersed to 100 feet with submersible conduit. The all-welded construction and17-4 and 316 SST used in the pressure cavity make the 411 watertight and strong against corrosion. The unit is designed without and“O”-ring & insures reliability. For sour gas & other corrosive media, the 411 is available with 316 SST, Inconel or Hastelloy wetted parts.
Pressure ranges include 0 through 100,000 PSI and are available in sealed gauge, absolute and sealed vacuum.
Full Scale Pressure Range (FSPR):0-5, 10, 15 PSISG, A, SV and 3-15 PSISG 0-20, 25, 30, 50, 75,100, 150, 200, 300, 400, 500, 750, 1000, 1500, 2000, 3000, 4000,5000, 7500, 10,000, 15,000, 20,000, 25,000, 30,000, 40,000,50,000, 75,000, 100,000 PSISG, PSIA
Full Scale Temperature Range:0-170ºF, unless customer specified(only applies when ordered with QF option)
Supply Voltage: 12-36 Vdc
Regulations:Less than 0.02% FSO/V over supply voltage range.
Output Signal:Two wire 4-20 mA. Digital process signal superimposed on a4-20 mA signal, available to any host computer system conformingto HART protocol.
Load Impedance: 250 ohms at 17 Vdc
Accuracy: Greater than 0.25% of calibrated span including errorsdue to linearity, hysteresis and repeatiblity, RSS
Combined Zero & Span Temperature Effects on Accuracy:At 1:1 is less than 0.25% FSO per 50ºFAt 5:1 is less than 0.5% FSO per 50ºF
Compensated Temperature Limits: *0 thru +170ºF based on actual operating temperature.
Operating Temperature Limits: -40 to +185ºF
Range Adjustments: 5:1 (ranges 0-100 psi thru 1-15,000 psi only)
Circuit Protection: Reverse polarity protected Units are protectedagainst voltage transients above 45V to 20A at 0.02 milliseconds.
RFI/EMI Suppression:Negligible effect to 500 Mhz at 5 watts direct contact.
Insulation Resistance: Better than 10 megohms at 50V DC
Proof Pressure: 5 to 50 PSI 100 PSI 75 to 15,000 2xFSPR or20,000 PSI, whichever is less 20,000 to 100,000 PSI 1.2x FSPR or125,000 PSI whichever is less.
Burst Pressure:0-5 thru 0-50 PSISG, A, SV and 3-15 PSISG 250 PSI.0-75 thru 0-15,000 PSIG, A-5 X full scale pressure range or 22,500PSIG, whichever is less.0-20,000 thru 0-100,000 PSIG, A-1.5 times full scale pressure rangeor 125,000 PSIG, whichever is less.
Long-Term Stability:Greater than 0.25% FSPR over six months.
Resolution: 12 bit
Frequency Response:Analog output response to a step change in pressure will be from0.070 sec minimum to 40 sec maximum for one time constant & isadjustable through software.
Shock & Vibration Without Change: 100 g’s PK to PK
Enclosure Materials: 316 SST
Measured Fluids:Any gas or liquid compatible with 17-4 PH, 316 SS, Inconel X750,Hastelloy C-276 optional.
Standard Process Pressure Connection:0-5 thru 0-15,000 PSI -1/4” Female Connection0-20,000 thru 0-50,000 PSI - 9/16”-18 gland thread, pressure relieved.1/4” OD high pressure tube, 60° cone. Conforms to Autoclave typeF- 250-C.0-61,000 thru 0-75,000 PSI - 5/8” -18 gland thread pressure relieved.5/16” OD high pressure tube, 60° cone. Conforms to Autoclave type F-312-C150.
Approved Options:QF - Temperature output over second 4-20 mA loop.
Ordering: Specify model, and pressure range and indicate modifications or accessories required.
*Measured fluid temperature in excess of the compensated temperature limits may be acceptable depending on ambient temperatureconditions.
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
OIL/GAS/HAZARDOUS3939
FIELD RANGEABLE PROCESS PRESSURE TRANSMITTERModel 1171Model 1171
FEATURES:FEATURES:• 50 Through 100,000 PSIS, PSIA & PSIV• 4-20 mA Loop Powered• 5:1 Ranging• Magnetically Coupled Adjust• FM & CSA Intrinsically Safe & ExplosionProof approvals.
APPLICATIONS:APPLICATIONS:• Off Shore Rigs and Pumping Platforms• Pipelines and Processing• Shipboard and Marine Applications• Plastics and Paper - All Processes
A5SL-1171.00 Rev A
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
This rugged, harsh-environment transmitter is small in size and designedto solve your worst weather nightmare.
Completely sealed, it can be submersed to 100 Ft with submersible con-duit. The all welded construction and 15-5 and 316 SST used in the pres-sure cavity make the Model 1171 watertight and strong againstcorrosion. The unit is designed without an “O”- ring and insures reliability.
The external zero, span, and calibration controls are hermetically sealedand easily adjusted with the help of a magnetically-coupled drive system.This unit allows for 5:1 ranging of the transmitter’s standard pressurerange.
Pressure ranges include 5 through 75,000 PSI and are available in sealedgauge, absolute and sealed vacuum.
Featuring a calibration circuit that permits setup and ranging, there is noneed for calibrated pressure source.
Model 1171 is FM explosion proof, Intrinsically Safe, and CE Approved.
Approvals
3
1
1.25
ØFL
ATS
1/4
NPT
1.50
0Ø
1/2
NPT
4.68
5
CoarseZero
OffCalOff
GP:50NY, LTDPRESSURE
TRANSDUCERTEL: (716) 773-9300
APPROVED
Ο1
ΟΟ3
Some options will affect dimensions.Consult factory if important.
5.44
REF
.
MDL:S/N:Range:Max. PreOutput:4Red + Ex
FMExplo.CL: I, II,GP A, B,Vmax=36ci=3000p
2
4
4 Span
Ο2 FineZero
OIL/GAS/HAZARDOUS4040
Ordering: Specify model, and pressure range and indicate modifications or accessories required.
*Measured fluid temperature in excess of the compensated temperature limits may be acceptable depending on ambient temperatureconditions.
Regulations: Less than 0.02% FSO/V over supply voltage range.
Output Signal: 4-20 mA, 2 wire loop Powered
Load Impedance: 1350 ohms a 36 Vdc
Accuracy: Greater than 0.25% of calibrated span including errors due to lin-earity, hysteresis and repeatiblity, RSS
Combined Zero & Span Temperature Effects on Accuracy:Less than 1.0% per 100ºF
Combined Zero & Span Temperature Effects on Accuracyat 5:1 Ranging:Less than 3.5% FSPR per 100ºF
Compensated Temperature Limits: *0 thru +170ºF based on actual operating temperature.
Operating Temperature Limits: -10 to +176ºF
Range Adjustments: 5:1
Range Calibration Signal: 20% and 100%, calibration signals providedby maintain-contact switch.
Range Calibration Signal Accuracy: Greater than1.0%. Exact pres-sure to output correlation data provided.
Zero Balance: Fine and Coarse adjustable
Interaction Between Zero & Span Range: Zero Adjustment doesnot affect range. Span adjustment effect on zero is less than 0.5%
Circuit Protection: Reverse polarity protected Units are protected againstvoltage transients above 45V to 20A at 0.02 milliseconds.
Insulation Resistance: Better than 10 megohms at 50V DC
Proof Pressure: 5 to 50 PSI, 100 PSI / 75 to 15,000 2xFSPR or 20,000 PSI,whichever is less. - 20,000 to 100,000 PSI 1.2 x FSPR or 125,000 PSI which everis less.
Burst Presure:- 0-5 thru 0-50 PSISG, A, SV and 3-15 PSISG 250 PSI- 0-75 thru 0-15,000 PSIG, A-5 times full scale pressure range or 22,500PSIG, whichever is less.- 0-20,000 thru 0-100,000 PSIG, A-1.5 times full scale pressure range or125,000 PSIG, whichever is less.
Long-Term Stability: Greater than 0.25% FSPR over six months.
Resolution: Infinite
Response Time: Approximately 5 milliseconds
Shock & Vibration Without Change: 100 g’s PK to PK
Enclosure Materials: 15-5 SS and 316 SS
Sensor (Diaphragm): 17-4 SS
Measured Fluids: Any gas or liquid compatible with 17-4 SST.Inconel X750 optional.
Standard Process Pressure Connection:- 0-5 thru 0-15,000 PSI -1/4” Female Connection.
- 0-20,000 thru 0-50,000 PSI - 9/16”-18 gland thread, pressure relieved.1/4” OD high pressure tube, 60° cone. Conforms to Autoclave type F- 250-C.
- 0-61,00 thru 0-75,000 PSI - 5/8” -18 gland thread pressure relieved. 5/16”OD high pressure tube, 60° cone. Conforms to Autoclave type F-312-C150.
Electrical Connection: 1/2” NPT male
Enclosure Classification: NEMA 3, 4
Weight: Less than 28 oz.
Hazardous Location FM/CSA Explosion Proof:Class I, II, III Division I / Groups A, B, C, D, E, F, G(FM Standard / CSA requires P option code)
FM/CSA Intrinsically Safe:Class I, II, III Division I / Groups A, B, C, D, E, F, G Ta= 80ºC, T4
CE Compliant:EMC 89/336/EECPED 97/23/EC
Accessories:Mounting Bracket, Conduit connection box, Loop powered digital indicator.
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
FIELD RANGEABLE PROCESS PRESSURE TRANSMITTERModel 1171Model 1171
OIL/GAS/HAZARDOUS4141
Model 340 SeriesModel 340 SeriesBLENDER DISCHARGE PRESSURE TRANSMITTER
FEATURES:FEATURES:• Flush Faced• All welded SST construction• Rugged welded design• No zero offset from installation• 5x proof pressure
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
A5SL-340.00
A/1 REDB/2 GREENC/3 WHITED/4 BLACKSHIELD
WIRING:
+EXC. / SIGNALNCNC-EXC./SIGNAL
340
Pending Approvals
Mechanicals:• Proof Pressure: 5 X full scale pressure range or 2 kpsi, whichever is less.• Burst pressure: 7 X full scale pressure range or 3.5 kpsi, whichever is less.• Case Materials: Type 316 Stainless Steel• Wetted Materials: 17-4PH SST
Process Connection:• 1/2” NPT Male
Electrical Connection:• 1/2” NPT Male conduit with 36” cable leadsOther connectors available
Unless otherwise stated, these specifications are the standards to which the units arenormally constructed. Upgrades or alterations may be easily and readily accomplishedby the standard option code or by discussion with the factory. We invite your inquiry.
Accuracy:Static error band includes (Hysteresis, Non-Linearity, Non-Repeatability)• Series B: ±0.5% FSO (RSS)• Series C: ±0.2% FSO (RSS)
Temperature Compensation:• Effect on Zero/Span: Less than ±2.0% FSO/100° F for each
Electricals:• Excitation Voltage: 9-40 Vdc• Output at 70° F: 4-20 mA ±2% FSO• Output Current: 2.0 mA max. for less than 0.1% FSO attenuation.• Load Impedance: 1350 ohms max. at 36 Vdc and 750 ohms max. Vdc.• Zero Balance: 4.0 mA ±2% FSO at 70° F• Insulation Resistance: Greater than 10 megohms at 50 Vdc & 70° F• Resolution: Infinite
Temperature Limits:• Compensated: 0° F to 180° F• Process Temp: 250° F
OIL/GAS/HAZARDOUS4242
Some options will affect dimensions. Consult factory if important.
• Shunt Calibration:(Model 170) - 100% FSO ±0.2% shorting E + F(Model 370) - 100% FSO ±0.2% by exciting E + F
• Zero Balance / Span: Less than ±1.0% FSO/100°FMechanicals:• Proof Pressure: 1.5 X Pressure Range• Burst Pressure: 3.0 X Pressure RangeMaterials of Construction:• Sensor: See options below• Housing: 300 Series SSTConnections:• Pressure: WECO® 2” 1502 or WECO® 2” 2002/2202• Electrical: Bendix PTØ2E-10-6PIdentification: Etched HousingWeight: Approx. 6lbs, options may affect weight
Designed specifically for use with either WECO® 2” 1502 or 2” 2002 Wing Union Fit-tings for the high pressure /vibration applications such as Cementing, Fracturing,Mud Pressure Measurement & Acidizing.
Some options will affect dimensions. Consult factory if important.
®
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
OIL/GAS/HAZARDOUS4444
Typical configurations (consult factory for more options)
ELECTRICAL CONNECTIONSCA Bendix 6-pin PTØ2E-10-6P (SST) (Standard on all models)CF 1/2” NPT(M) with 18” 18 AWG MTW cableDK Glenair 4-pin GC379-2-14S-2PDO Jupiter RECM 10TPN04-16DM MS3102E 14S-2PDP 4-Pin Brad Harrison styleDT4 4-Pin mini fast, 7/8-16 THD, Nickel Pltd. (Div 2 / Zone 2 only)
(No Barrier required when used w/ approved mating cable)(Consult Factory for other electrical conn. for Zone 2/Div 2 units)
OPTIONSGB Alternate electrical outputGC Special calibration runGE Improved Temperature Comp.
(± 0.5% FSO/100° F for zero/span)GG Alternate shunt calibration signalME 80% Shunt CalibrationMR Alternate wiringNB 100% Powered Shunt (std on 370)NG Removable carrying handleNH Dual welded handleNC 100% Unpowered Shunt Calibration (std on 170/270)QX Extended operation- 350° F process temperatureQY Remove shunt cal.
Consult factory for other options, such as carrying handle, optional materials,electrical connectors and replacement fasteners.
Consult WECO® manufacturer for published pressure maximums.WECO® is a Federally Registered Trademark with FMC Technologies.
MODELS170 3 mV/V270 0 - 5 Vdc370 4 - 20 mA
APPROVALS - 370 Series OnlyAI ATEX/IEC Intrinsic SafetyAN ATEX/IEC Zone 2EC CE MarkingGI ATEX/IEC/FM/CSA Intrinsic SafetyGN ATEX/IEC/FM/CSA Div/Zone 2I FM/CSA Intrinsic SafetyN FM/CSA Div/Zone 2
Model 340T SeriesModel 340T SeriesTEMPERATURE TRANSMITTER
FEATURES:FEATURES:• Designed for on-board Vehicles• Compact, welded design• 4-20mA or 0-5 VDC Output• Ranged from -65° F to 300° F• Probe lengths from 3/4” to 6”
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
A5SL-340T.00 Rev. A
A/1 REDB/2 GREENC/3 WHITED/4 BLACKSHIELD
WIRING:
+EXC. / SIGNALNCNC-EXC./SIGNAL
340 T
Mechanicals:• Pressure Rating: 10,000 PSI• Wetted Parts: 316L SST• Case Materials: 300 Series SST
Process Port: (other ports available)• 1/4” NPT Male
Electrical Connection: (other connections available)• PT1H-10-6P SST or Equal
Unless otherwise stated, these specifications are the standards to which the units arenormally constructed. Upgrades or alterations may be easily and readily accomplishedby the standard option code or by discussion with the factory. We invite your inquiry.
Accuracy:• ±3.0° F
Electricals:• Excitation Voltage: 9-36 Vdc• Output at 70° F: 4-20 mA ±1% FSO• Output Current: 2.0 mA max. for less than 0.1% FSO attenuation.• Load Impedance: 1350 ohms max. at 36 Vdc and 750 ohms max. Vdc.• Zero Balance: 4.0 mA ±1% FSO• Insulation Resistance: Greater than 100 megohms at 50 Vdc & 70° F• Thermal Response Time: <2 Sec.
Temperature Limits:• Calibration Range: Available from -65°F +300°F• Max Ambient Operating: + 185° F• Max Process Operating: + 300° F
(Optional process and electrical connectors available)
OIL/GAS/HAZARDOUS4646
Some options will affect dimensions. Consult factory if important.
ELECTRICAL CONNECTOR OR CABLE (Other available)CA = 6-PIN PTIH-10-6PDC = TURCK FS 4.4 (4-PIN)DC5 = TURCK FS 4.5 (5-PIN)DC6 = TURCK FS 4.6 (6-PIN)HK** = NEMA 4X WITH POLY CABLE
** - Denotes length in inches (eg. HK36=36”)
GENERAL OPTIONSQV = IMPROVED RESPONSE TIME (0.5 SEC)
TEMPERATURE RANGE (Other ranges available)00 = 0°F TO 250°F01 = -40°F TO 250°F02 = -40°F TO 180°F03 = 0°F TO 300°F
Typical configurations (Consult factory for more options)
Model 340T SeriesModel 340T SeriesTEMPERATURE TRANSMITTER
H = 2.00J = 2.25K = 2.50L = 3.00M = 3.50
N = 4.00O = 4.50P = 5.00R = 5.50S = 6.00(MAX)
OIL/GAS/HAZARDOUS4747
Model 540 SeriesModel 540 SeriesFLUSH MOUNT CANBUS PRESSURE TRANSMITTER
FEATURES:FEATURES:• Flush sensor resists plugging• All welded, rugged construction• No Zero installation effect• Compact design
CANBus J1939 Protocol offers:• Adjustable Bit Rate• Adjustable Message Output Rate• System Output Re-Zero• Digital Shunt• Adjustable Message Addresses• Custom Message Streaming• High Stability option provides; Higher Resolution, Noise Reduction,Better Thermal Performance & Long Term Stability
PRESSURE RANGES:PRESSURE RANGES: (Consult factory for higher ranges)
• 0-50 Thru 0-1,000 PSI
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
A5SL-540.00
Mechanicals:• Proof Pressure: 2x FSO (Optional 5 X)• Burst Pressure: 5x FSO• Case Materials: 300 series SST• Wetted parts: 17- 4PH SSTT• Process Connection: Flush ½” NPT Male
Protocol: (Consult Factory for More Detail)• Standard Can protocol - 11 bit CAN Identifiers• Optional Extended Can 2.0B -29 bit CAN Identifiers• Standard messaging: Pressure, Temperature & mV/V SensorUp to four messages can be streamed
Accuracy: (Static Error Band)• Series B: +/- 0.5 % FSO• Series C: +/- 0.25 % FSO• Series D: +/- 0.1 % FSO• Series E: +/- 0.05 % FSO
Temperature Compensation: (Expanded & Improved Options Available)• Compensated Range: 30° F -185° F• Operating Range: Process: -40° F to +250° F
Ambient: -40° F to +185° F• Storage Range: -65° F to +250° F• Temperature Effect on Zero: +/-0.5 % FSO/100° F• Temperature Effect on Span: +/-0.5 % FSO/100° F
Electricals:• Standard Excitation Voltage: 5.6 -18 VDC• Optional Expanded Excitation Voltage: 4.5-37 VDC• Current Draw: 40 mA• Output: CANBus J1939 (Consult Factory for Specifics)• Standard Resolution: 16 Bit• Optional Improved Resolution: 18 Bit• Standard Connection: ½” NPT Male Conduit with 36” leads• 4 Wire Device: +/- Signal & +/- Power, Case Ground
ELECTRICAL CONNECTOR OR CABLECA PTIH-10-6P (Mate PT06E-10-6S [SR], not included)CF 1/2” NPT (M) Thread with 3FT leadsDK 4 Pin SST Glenair Equal
PRESSURE PORTSIM 1/2” NPT Male (Flush)
MODEL540 CANBus (J1939)
STATIC ACCURACYB +/- 0.5 % FSOC +/- 0.25 % FSO
PRESSURE RANGE(PSI)
PRESSURE TYPE2 Gauge3 Absolute6 Sealed Gauge
PVPXPZRBRD
0-150-750-1000-1500-200
NOTE:Specifications reflect standard product, improved performance /mechanical options available.
Modifications may alter specs, consult factory for more information.
Typical configurations (Consult Factory for More Options)
Model 540 SeriesModel 540 SeriesFLUSH MOUNT CANBUS PRESSURE TRANSMITTER
D +/- 0.1 % FSOE +/- 0.05 % FSO
RERFRHRKRM
0-2500-3000-5000-7500-1,000
OIL/GAS/HAZARDOUS4949
Model 543 SeriesModel 543 SeriesDUAL PRESSURE & TEMPERATURE CANBUS TRANSMITTER
FEATURES:FEATURES:• Pressure & temperature in one device• Reduces IO Points• All welded, rugged construction
CANBus J1939 Protocol offers:• Adjustable Bit Rate• Adjustable Message Output Rate• System Output Re-Zero• Digital Shunt• Adjustable Message Addresses• Custom Message Streaming• High Stability option provides; Higher resolution, noise reduction,better thermal performance & long term stability
PRESSURE RANGES:PRESSURE RANGES: (Consult factory for higher ranges)
• 0-50 Thru 0-1,000 PSI
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Electricals:• Standard Excitation Voltage: 5.6 -18 VDC• Optional Expanded Excitation Voltage: 4.5-37 VDC• Current Draw: 40 mA• Output: CANBus J1939 (Consult factory for specifics)• Standard Resolution: 16 Bit• Optional Improved Resolution: 18 Bit• Standard Connection: ½” NPT Male Conduit with 36” leads• 4 Wire Device: +/- Signal & +/- Power, Case Ground
Mechanicals:• Proof Pressure: 2x FSO (Optional 5 X)• Burst Pressure: 5x FSO• Case Materials: 300 series SST• Wetted parts: 17- 4PH SSTT• Process Connection: ½” NPT Male with temp probe
Protocol: (Consult factory for more detail)• Standard Can protocol - 11 bit CAN Identifiers• Optional Extended Can 2.0B -29 bit CAN Identifiers• Standard messaging: Pressure, Temperature & mV/V Sensor.Up to four messages can be streamed
Accuracy - Pressure Measurement: (Static Error Band)• Series B: +/- 0.5 % FSO• Series C: +/- 0.25 % FSO• Series D: +/- 0.1 % FSO• Series E: +/- 0.05 % FSO
Temperature Compensation: (Pressure)(expanded & improved options available)• Compensated Range: 30° F -185° F• Operating Range: Process: -40° F to +250° F
Ambient: -40° F to +185° F• Storage Range: -65° F to +250° F• Temperature Effect on Zero: +/-0.5 % FSO/100° F• Temperature Effect on Span: +/-0.5 % FSO/100° F
Temperature Measurement:• Standard Accuracy: +/- 0.5° C from -55 to +125° C (-70 to 257° F)• Expanded Accuracy: +/- 1.0° C from -40 to 205° C (-40 to 400° F)• Standard Resolution: 0.0625° C• Expanded Resolution: 0.5° C
OIL/GAS/HAZARDOUS5050
Some options will affect dimensions. Consult factory if important.
Temperature Range00 0° F to 250° F01 -40° F to 250° F02 -40° F to 185° F03 0° F to 300° F
Probe Length (Consult factory for more measurements)A .75B 1.00C 1.25D 1.50
ELECTRICAL CONNECTOR OR CABLECA PTIH-10-6P (Mate PT06E-10-6S [SR], not included)CF 1/2” NPT (M) Thread with 3FT leadsDK 4 Pin SST Glenair Equal
PRESSURE PORTSIM 1/2” NPT Male (Flush)
MODEL543 CANBus (J1939)
STATIC ACCURACYB +/- 0.5 % FSOC +/- 0.25 % FSO
PRESSURE RANGE(PSI)
PRESSURE TYPE2 Gauge3 Absolute6 Sealed Gauge
Typical configurations (consult factory for more options)
Model 543 SeriesModel 543 SeriesDUAL PRESSURE & TEMPERATURE CANBUS TRANSMITTER
PVPXPZRBRD
0-150-750-1000-1500-200
D +/- 0.1 % FSOE +/- 0.05 % FSO
RERFRHRKRM
0-2500-3000-5000-7500-1,000
NOTE:Specifications reflect standard product, improved performance / mechanical options available. Modifications may alter specs, consult factory for more information.
G 1.75H 2.00J 2.25K 2.50
OIL/GAS/HAZARDOUS5151
A5SL-70QX.00 Rev A
HIGH PRESSURE HIGH TEMPERATURE (HPHT)WECO UNION PRESSURE TRANSMITTER
• Zero Balance / Span: Less than ±1.0% FSO/100°FMechanicals:• Proof Pressure: 1.5 X Pressure Range• Burst Pressure: 3.0 X Pressure RangeMaterials of Construction:• Sensor: See options below• Housing: 300 Series SSTConnections:• Pressure: WECO® 2” 1502 or WECO® 2” 2002/2202• Electrical: Bendix PTØ2E-10-6P (SST) Options availableIdentification: Etched on Housing
*Maximum ambient operating range assumes 350° F (-177° C)process temperature. Otherwise maximum ambient temp is 185° F (85° C)
Designed specifically for use with either WECO® 2” 1502, 2202, 2002 or 602 WingUnion Fittings for high pressure & high temperature (HPHT) well applicaions.
BENDIX 6-PIN CONNECTORPTIH-10-6P, OPTION “CA”
GROUND SCREW
HOUSING WITHCOOLING FINS(316 SST)
LOCKING FASTENERS
SENSOR BODY
(Ø3.35)2” - 2002 / 2202
(Ø3.69)2” - 1502
(1.75)
(6.75)
Some options will affect dimensions.Consult factory if important.
®
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
OIL/GAS/HAZARDOUS5252
Typical configurations (consult factory for more options)
2” #2002/2202 CONFIGURATION(SHOWN WITH “CF” CONNECTOR)
RECESSEDCONNECTOR
18”MIN
4.75
WECO “HAMMER” UNION TEMPERATURE TRANSMITTERModels 271, 371Models 271, 371
FEATURES:FEATURES:• Provides accurate temperature readings
in WECO® style fitting• Rated to 22,500 PSI• Corrosion resistant materials meet NACEMRO175 Guidelines
• 0-5 VDC or 4-20 mA outputs• High temp operation option to 250ºF
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:Static Error (Includes Hysteresis, Non-Linearity, Non-Repeatability)• ±0.75% FSOZero Balance at 70° F:• (Model 271) - 0.0 V ±0.5% FSO• (Model 371) - 4.0 mA ±0.5% FSOFull Scale Output:• (Model 271) - 5 VDC ±0.5% FSO• (Model 371) - 16mA ±0.5% FSOStability: ±0.1% FSO/yrMin & Max Process Temperature Limits:• -65° F to +250° FElectricals:• Excitation Voltage:(Model 271) - 9-36 VDC(Model 371) - 9-36 VDC
Designed specifically for use with either WECO® 2” 1502 or 2” 2002 Wing UnionFittings for the high pressure /vibration applications such as Cementing, Fracturing,Mud Pressure Measurement & Acidizing.
* Optional Shunt Cal connections
Some options will affect dimensions. Consult factory if important.
®
OIL/GAS/HAZARDOUS5454
Typical configurations (consult factory for more options)
CALIBRATED TEMPERATURE RANGE (° F)00 0º to 250º01 -40º to 250º
(Consult factory for more ranges)
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
WECO “HAMMER” UNION TEMPERATURE TRANSMITTERModels 271, 371Models 271, 371
®
OIL/GAS/HAZARDOUS5555
A5SL-7540.00 Rev F
FEATURES:FEATURES:• Rated to 10,000 PSI/23,000 FT WC• Compact, Rugged Design rated for Seawater• Line and proof pressure options to 10,000 PSI• Manufactured to MIL & MIL-Spec Standards
Model 7540 series is manufactured and tested to the following MIL-STD and MIL-Spec standards to insure the highest quality:
• NIST Traceability and Calibration.............................................................................................................................................................................................. ANSI-Z540-1• Workmanship ............................................................................................................................................................................................... J-001 / NASA 8739.3 standards• Quality System ....................................................................................................................................................................................................................... ISO 9001:2008
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
MARINE SERVICE (SUB SEA) DIFFERENTIAL PRESSURE TRANSDUCERModel 7540Model 7540
Designed for the tough challengesand environmental rigors of undersea service.
Heritage Includes:• Lockheed Martin Maritime• Institute of Ocean Technology• Schilling Robotics
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENTBASED ON ELECTRONICS OPTIONS
Typical Applications:• Mini-sub Hydraulic Systems• Submarine Propulsion Systems• Subsea Oil Well Head Pressures
PIN 4-20 MA 4-WIRE MV/V &VDC ISOLATED
4- WIRE VDCNON-ISOLATED *
3-WIREVDC
A/1 +EXC/SIG +EXC +EXC +EXC
B/2 N/C +SIG +SIG +SIG
C/3 N/C -SIG -SIG * N/C
D/4 -EXC/SIG -EXC -EXC * -EXC/-SIG
E/5 N/C N/C N/C N/C
F/6 N/C N/C N/C N/C
* COMMONS JUMPERED
WIRING CODEWIRING CODESTANDARD WIRINGOPTIONS MAY AFFECT PIN OUT
Units are inches
5656
ORDERING GUIDE:ORDERING GUIDE:
MODEL OUTPUT RANGE PRESSURETYPE OPTIONS
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
MISC:GF 0-120ºF on oil filled undersea unitsGH 100% Internal ShuntGK Inconel Pressure CavityGL Cleaning for oxygen serviceGP Hastelloy Pressure CavityJA 100 ohm 2 wire Platinum RTD, 0.0385 alphaJB 1000 ohm 2 wire Platinum RTD, 0.0385 alphaME Shunt cal, 80% InternalMS Bi-Directional Allows for both positive & negative output, for option 3, 12mAQU Monel 500 sensor, 400 wetted partsHM 10,000 psi Base Pressure Flange GirdleGD 10X PR for proof pressure (may affect overall performance, not available
with options GP,GK,GF and less than 100 psid ranges)MZ Add Mechanical Stop for >5X proof with 1% FSO zero balance
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available, consult factory for moreinformation. Modifications may alter specs.
Ranges 30 thru 7,500 PSID (Bi-directional or uni-directional)Maximum Depth Pressure 10,000 PSI (23,000 Ft of seawater)Proof Pressure (High or Low side) 2 X Pressure Range or 10,000 psi whichever is less (10X optional)Static Line Pressure 3,000 psi or (10,000 psi-HM option)Burst Pressure (High or Low side) 3.0 X Pressure Range or 10,500 psi whichever is less (15 X optional)Zero Balance / Span Balance ±0.5% FSO EachStatic Accuracy (BFSL) <±0.3% FSONon-Repeatability <±0.1% FSONon-Linearity (BFSL) <±0.2% FSOHysteresis <±0.2% FSO
Thermal Error Zero ±1.0% FSO / 100° FSpan ±1.0% FSO / 100° F
Total Error Band (all 5 parameters) ±2.3% FSOLine Pressure Effect (Zero) <±1% FSO at 1,000 psi, <±2.5% FSO at 3,000 psi, (<±5% FSO at 10,000 psi - option HM)Response Time < 4 msExcitation 18V - 36 Vdc (others available)Input Current 4-Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
20°F to 70°F (Expanded ranges available)20°F to 70°F (Expanded ranges available)
Wetted Parts 316 SST & 15-5 PH or 17-4 PH SST (Inconel or Monel optional)Pressure Port MS 33656-4 (M) (7/16-20) standardElectrical Connector See connector optionsWeight 2.0 lbs 2.5 lbs with option HM (some options may affect weight)
OIL/GAS/HAZARDOUS
OIL/GAS/HAZARDOUS5757
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration.............................................................................................................................................................................. MIL-STD-45662A• Workmanship ....................................................................................................................................................................................... J-001 / NASA 8739.3 standards• Quality System .................................................................................................................................................................................................................. ISO 9001:2000
Designed to: MIL-STD-810C&EMIL-STD-461/462D&E
SUB SEA PRESSURE & TEMPERATURE TRANSMITTERModel 7500-9000 SeriesModel 7500-9000 Series
FEATURES:FEATURES:• High Accuracy, 0.25% FSO• Submersible to 30,000 feet seawater• Digital output available• Pressure & Temperature Output
Ranges:• 0 thru 20,000 PSIGOutputs:• 4-20mA, 0-Full Scale Pressure, 4-20mA, 0-200° CAccuracy:• ±0.25% FSO (RSS)Proof Pressure: 1.5 X Pressure RangeBurst Pressure: 2.5 X Pressure RangeZero / Span Balance:• ±1.0% FSO for Pressure and TemperatureStability: ±0.5% FSO per yearZero Shift:• <1% FSO with line pressure appliedOperating Range:• Electronics: -10° C to 80° C• Process: -10° C to 220° CCompensated Range:• 0° C to +200° CTemperature Performance: (Pressure Only)• Zero Balance: Less than 1.0% FSO per CTR• Span: Less than 1.0% FSO per CTRExcitation:• 12-36 Vdc• 18-36 Vdc for Hart communication (250 ohm load required)Connector: MSSL-12-FCR-PBOF
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
20.0 REF
17.0 REF
SAE-4 TEST PORT
2.230
2.895
11.31 DIA
8.259
6.00 DIA
0.800
MSSL-12#16FCR PBOF
A5SL-75/9000.00 Rev C
Units are inches
OIL/GAS/HAZARDOUS5858
INLAY OPTIONSI 625 InconelS 316 Stainless Steel
APPROVAL / CERTIFICATION OPTIOND DNV Cert
Typical configurations (consult factory for more options)
5K PSI MODELS ONLY1 API 3 1/8, with AX groove2 API 3 1/8, with RX-35 groove3 API 4 1/16, with AX groove4 API 4 1/16, with BX-155 groove6 API 3 1/8, with BX-154 groove8 API 4 1/16, with BX-155 groove
10K/15K PSI MODELS ONLY1 API 3 1/16, with AX groove2 API 3 1/16, with BX-154 groove3 API 4 1/16, with AX groove4 API 4 1/16, with RX-39
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
SUB SEA PRESSURE & TEMPERATURE TRANSMITTERModel 7500-9000 SeriesModel 7500-9000 Series
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-linearity, Non-Repeatability)• Within ±0.2% FSO, RSS, ±0.1% FSO, RSS AvailableFull Scale Output (FSO):• (Model 142) 3.0 mV/V ±0.5% FSO at 70° F• (Model 242) 5.0 Vdc ±0.5% FSO at 70° F• (Model 342) 20 mA±0.5% FSO at 70° FTemperature Limits:• Compensated: -40º F to +250º F• Operating: -65º F to +275º FTemperature Compensation:• Zero & Span: Within ±0.0075% FSO/ºFElectricals:• ExcitationVoltage:(Model 142) 3.5-15 Vdc(Model 242) 9-40 Vdc(Model 342) 9-36 Vdc
Developed specifically for the harsh operating environments encountered inground support testing, these units feature the latest blend of mechanical andcircuit technology to achieve superior ruggedness, accuracy, and fatigue life.When you need assistance with your pressure application, call GP:50.
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
AEROSPACE6161
A5SL-7100.00 Rev F
FEATURES:FEATURES:• High accuracy, 0.3% RSS (terminal point) standard(0.1% RSS available)
• Nominal 3mV/V output, up to 10mV/V options• Space and flight qualified• Secondary containment as high as 4500 psi onmost ranges.
Typical Applications:• Satellites: Commercial and defense• Ground & Engine Test• Launch Vehicles• Aircraft Systems / Avionics
GP:50 Aerospace transducers are manufactured and tested to the following MIL-STD & MIL-Spec to insure the highest quality:
• NIST Traceability and Calibration........................................................................................................................................................................................... ANSI-Z540-1• Workmanship ............................................................................................................................................................................................ J-001 / NASA 8739.3 standards• Quality System .................................................................................................................................................................................................................... ISO 9001:2008
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
HYDROPHOBICBREATHER PLUG(FOR PSIG UNITS ONLY)
WIRING CODEWIRING CODE
STANDARD WIRING.OPTIONS MAY AFFECT PIN OUT
ABCE
F
D
Units are inches
AEROSPACE6262
Specifications and options reflect standard product with amplified output. Non-amplified & other performance / mechanical / electrical / optionsavailable, consult factory for more information. Modifications may alter specs.
ORDERING GUIDE:ORDERING GUIDE:
OUTPUT1 3 mV/V7 2 mV/V8 10 mV/V11 1 mV/VPRESSURE RANGE (PSI)PJ 0-5 *PN 0-10 *PP 0-15 *PR 0-20 *PO 0-25 *PV 0-50PZ 0-100RB 0-150RD 0-200* CAN DIA 1.5”
PRESSURE TYPEA Sealed Absolute, ref to vacuumG Gauge, ref to atmosphereSG Sealed Gauge, ref to 14.7 psia
Thermal Error Zero ±0.5% FSO / 100° FSpan ±0.5% FSO / 100° F
Total Error Band (all 5 parameters) 1.3% FSO (1.0% optional)Response Time <4 msExcitation Voltage 3.5 to 15 VdcOutput Impedance 5,000 ohms standard (350 ohms optional)Load Impedance 230,000 ohms minimum for < ±0.1% FSO attenuationTemperature Limits
CompensatedOperating
-10°F to +180°F (-23°C to +82°C)-20°F to +190°F (-29°C to +88°C)
Random Vibration > 75 G RMS (20 Hz to 2,000 Hz)Sinusoidal Vibration 7.5 G’s from 5 Hz to 100 HzShock > 4,000 G’sConstant Acceleration 5 G’s for 30 minutesWetted Parts 316 SST port & 17-4 PH SST sensor (Inconel, Hastelloy optional)Pressure Port MS 33656-4 (M) standardElectrical Connector PTIH-10-6P (MIL D38999 series) standardWeight 4 oz. (some options may affect weight)Design meets MIL-STD-810F requirement 12g
AEROSPACE6363
A5SL-7200.00 Rev F
FEATURES:FEATURES:• High accuracy, ±0.3% RSS Terminal (±0.1% RSS available)• 0-5 Vdc, 0-10 Vdc and 4-20 mA outputs (Isolated output options)• “B+” & “S” class electronics available• Up to 4,500 psi of secondary containment rating• 10X overload option• Temperature output options• High shock & vibe rated• Exotic wetted parts optional Heritage Includes:
GP:50 Aerospace transducers are manufactured and tested to the following MIL-STD & MIL-Spec to insure the highest quality:
• NIST Traceability and Calibration............................................................................................................................................................................................ ANSI-Z540-1• Workmanship ............................................................................................................................................................................................ J-001 / NASA 8739.3 standards• Quality System .................................................................................................................................................................................................................... ISO 9001:2008
Transducer Design Meets: MIL-STD-810F All MethodsMIL-STD-461E
Shown at the left for pressure ranges50 thru 15,000 psi, shown at the right
for pressure ranges <50 psi.
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
FLIGHT QUALIFIED HIGH LEVEL PRESSURE TRANSDUCERModel 7200Model 7200 “B+” and “S” Class Electronics Available
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
ø1.00)
(7/8’)HEX
OPTION FD
(0.88)
(0.33)
(3.30) VOLTAGE OUTPUT(3.62) CURRENT OUTPUT
(≥50 PSI) OPTION CA
(0.48)
ABCE
F
D
(0.33)
OPTION FD
(0.55)
(1.18)
(3.59) VOLTAGE OUTPUT(4.46) CURRENT OUTPUT
STENCIL LOCATION(MARKING INFORMATION)
(Ø1.00)OPTION CA
(0.49)
(<50 PSI)
(Ø1.50)
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Typical Applications:• Satellites: Commercial and Defense• Ground & Engine Test• Launch Vehicles• Aircraft Systems / Avionics
MISC:D Improved Static Accuracy to 0.1% and Total Error Band to 1.0%GB Alternate full scale outputsGD 10X Proof Pressure (may affect overall performance,not available with
ORDERING GUIDE:ORDERING GUIDE:MODEL OUTPUT RANGE PRESSURE
TYPE OPTIONS
//Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Example: 7200-2-RH-A-CA/FD/GH
OUTPUT2 0-5 Vdc (Non-isolated, 4 wire hookup)3 4-20 mA (Recommended for long cable runs)4 0-5 Vdc (Isolated, 4 wire hookup)5 0-10 Vdc (Non-isolated, 4 wire hookup)6 0-10 Vdc (Isolated, 4 wire hookup)9 0-5 Vdc (3 wire hookup)10 0-10 Vdc (3 wire hookup)Isolated = Input isolated from Output signal
PRESSURE RANGE (PSI) Contact factory for non-standard ranges* CAN DIA 1.5”
PRESSURE TYPEA Sealed Absolute, ref to vacuumG Gauge, ref to atmosphereSG Sealed Gauge, ref to 14.7 psia
PJPNPPPRPOPVPZ
0-5 *0-10 *0-15 *0-20 *0-25 *0-500-100
RBRDRFRHRKRMRO
0-1500-2000-3000-5000-7500-1,0000-1,500
RRRTRVRXRZSB
0-2,0000-3,0000-5,0000-7,5000-10,0000-15,000
Specifications reflect standard product, other improved performance / mechanical / electrical / options available, consult factory for more information.Modifications may alter specs / space qualification.
Ranges 0-5 thru 0-15,000 PSIA, PSIG, PSIV or PSISG optionsProof Pressure 1.5 X with (25 psia min.) 10 X optionalBurst Pressure 3.0 X (15 X optional)Secondary Containment Rating 4,500 psi for ranges ≥50 psi, 2,400 psi for ranges <50 psiZero Balance / Span Balance ±0.5% FSO EachStatic Accuracy RSS(Non-linearity, Hysteresis, Non-Repeatability) <±0.3% FSO RSS (<±0.1% FSO optional)
Thermal Error Zero ±0.5% FSO / 100° FSpan ±0.5% FSO / 100° F
Total Error Band (all 5 parameters) ±1.3% FSO (±1.0% FSO optional)Response Time <4 msExcitation Voltage 18V-36 Vdc (other excitations available)Input Current 4 -Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
-10°F to +180°F (-23°C to +82°C)-20°F to +190°F (-29°C to +88°C)
Random Vibration > 75 G RMS (20 Hz to 2,000 Hz)Sinusoidal Vibration 7.5 G’s from 5 Hz to 100 HzShock > 4,000 G’sConstant Acceleration 5 G’s for 30 minutesWetted Parts 316 SST & 15-5 sensor (Inconel, Hastelloy optional)Pressure Port MS 33656-4 (M) standardElectrical Connector PTIH-10-6P (MIL D38999 series) standardWeight 4 oz. (some options may affect weight)Design meets MIL-STD-810F 25 Grms / 100 G’s pk/pk/3500 G Pyroshock / 12g
AEROSPACE6565
A5SL-7201.00 Rev B
FEATURES:FEATURES:• Space Flight Qualified.• High accuracy, < 0.3% FSO RSS• “S” Class electronics & Rad-Hard to 40 KRAD• 0-5 Vdc output• Design life to meet 7 year LEO requirements• Full traceability• Shock & Vibration Space Qualified• Lightweight & compact size, <140 grams• Qualified packaging to FED-STD-101 Method 5005/5007• Standard Transducer internal materials qualified for space
flight per MSFC-HDBK-527
Model 7201 series is manufactured and tested to the following MIL-STD & MIL-Specs to insure the highest quality:
• NIST Traceability and Calibration............................................................................................................................................................................................... ANSI-Z540-1• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
SPACE QUALIFIED HIGH LEVEL, LOW NOISE PRESSURE TRANSDUCERModel 7201Model 7201
Designed for the tough challenges and environmental rigorsof satellite and space applications.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
(1.125)HEX
15° CHAMFERHEXØ LIMITATION
7/16-20 UNJF-3ABASED ON MS33656-04 LOCKHOLES
IDENTIFICATION
SYLGARD 184POTTED STRAIN
RELIEF
(3.12)
(3.67)
(36.0)
(0.50)
(Ø1.00)
TEFZEL CABLE STANDARD
Heritage Includes:• Lockheed Martin Space Systems
Units are inches
AEROSPACE6666
ORDERING GUIDE:ORDERING GUIDE:
PRESSURE TYPEA Absolute, ref to vacuumSG Sealed gage, ref to 14.7 psia
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Example: 7201-2-RH-A-CA/FD/GH
Specifications reflect standard product, other improved performance / mechanical / electrical / options available, consult factory for more information.Modifications may alter specs / space qualification.
Thermal Error Zero ±0.4% FSO over CTRSpan ±0.4% FSO over CTR
Total Error Band (all 5 parameters) ±1.0% FSOResponse Time < 4 msExcitation 15 Vdc + 50 mV (Regulated, Reverse Polarity Protected)Input Current 25 mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationTemperature Limits
Compensated (CTR)Operating
-4°F to +104°F (-20°C to +40°C)-75°F to +250°F (-60°C to +120°C)
Vibration, Shock (Qualified to MIL-STD-810 requirements) Better than 70 grms composite random, 4000 G’s pyroshock, 7.0 G’s sinusoidalWetted Parts Inconel 718 Sensor & Inconel 625 PortPressure Port 3/8-24 UNJF-3AElectrical Hook-up Tefzel cable with 4 conductor 32 AWG wireWeight <140 gramsDesign meets MIL-STD-461/EMI/RFI Some options may affect EMI/RFI rating
AEROSPACE6767
A5SL-7300.00 Rev C
GP:50 Aerospace transducers are manufactured and tested to the following MIL-STD & MIL-Spec to insure the highest quality:
• NIST Traceability and Calibration.............................................................................................................................................................................................. ANSI-Z540-1• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ....................................................................................................................................................................................................................... ISO 9001:2008Transducer Design Meets: MIL-STD-810F
MIL-STD-461E
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
1.00
1.00
3.48
7/8 HEX
CONNECTOR OPTION CA
3.93
1.50
STD = 3.70LP = 4.63
1.31 HEX
STANDARDPR > 100 PSI
LOW PRESSUREPR ≤ 100 PSI
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
PRESSURE RANGE (PSI)Contact factory for non-standard pressure ranges.*Can dia. 1.5”
PRESSURE TYPED Differential
Specifications and options reflect standard product with amplified output. Non-amplified & other performance / mechanical / electrical / optionsavailable, consult factory for more information. Modifications may alter specs.
Ranges 15 thru 15,000 PSID (Bi-directional or uni-directional)Proof Pressure (High & Low side) 2 X Pressure Range or 22,500 psi max, whichever is less.Static Line Pressure 2 X Pressure Range or 22,500 psi max, whichever is less.Burst Pressure (High & Low side) 3 X Pressure Range or 22,500 psi max, whichever is less.Zero Balance / Span Balance ±1% FSO EachStatic Accuracy <±0.3% FSO RSS (BFSL)Non-Repeatability <±0.1% FSONon-Linearity (Terminal) <±0.2% FSOHysteresis <±0.2% FSO
Thermal Error Zero ±1.0% FSO / 100° FSpan ±1.0% FSO / 100° F
Total Error Band (all 5 parameters) ±2.3% FSOLine Pressure Effect (Zero) <±1% FSO with line pressure appliedResponse Time < 4 msExcitation 18V-36 Vdc (others available)Input Current 4 -Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
-10°F to +180°F (-23°C to +82°C)-20°F to +190°F (-29°C to +88°C)
Wetted Parts 316 SST & 17-4 SST (Inconel or Hastelloy optional)Pressure Port MS 33656-4 (M) standardElectrical Connector PTIH-10-6P standardWeight 8 oz. (some options may affect weight)Design meets MIL-STD-461/EMI/RFI Some options may affect EMI/RFI rating
AEROSPACE6969
A5SL-7400.00 Rev C
FEATURES:FEATURES:• 0-5 Vdc, 0-10 Vdc and 4-20 mA outputs• High accuracy options• Rugged, SST construction• High static line pressure rating• RTD temperature output option
GP:50 Aerospace transducers are manufactured and tested to the following MIL-STD & MIL-Spec to insure the highest quality:
• NIST Traceability and Calibration..................................................................................................................................................................................... ANSI-Z540-1• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 / MIL-STD-461
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
Typical Applications:• Ground Support Systems• Ground & Engine Test• Aircraft Systems / Avionics
PIN 4-20 MA 4-WIRE MV/V &VDC ISOLATED
4- WIRE VDCNON-ISOLATED *
3-WIREVDC
A/1 +EXC/SIG +EXC +EXC +EXC
B/2 N/C +SIG +SIG +SIG
C/3 N/C -SIG -SIG * N/C
D/4 -EXC/SIG -EXC -EXC * -EXC/-SIG
E/5 N/C N/C N/C N/C
F/6 N/C N/C N/C N/C
* COMMONS JUMPERED
WIRING CODEWIRING CODE
STANDARD WIRINGOPTIONS MAY AFFECT PIN OUT
Ø1.00
0.30
0.75
1.98
3.08
4.44 VDC OUTPUTS4.76 MA OUTPUT
Ø1.75
7/8 FLATS
Ø1.13
7/16-20 THREADBASED ONMS33656-04
“CA” CONNECTOR
AEROSPACE7070
ORDERING GUIDE:ORDERING GUIDE:
OPTIONSCONNECTORSCA PTIH-10-6P BendixCI D38999/27YB98PNDB D38999/27YA35PNPORTSFA MS33649-4, 7/16-20 (F)FD MS33656-4, 7/16-20 (M)MISC:GB Alternate full scale outputsGF Expanded process temperature range, 20 to 200°F (±2% FSO/100º F)GH 100% Internal ShuntGK Inconel Pressure CavityGL Cleaning for oxygen serviceGP Hastelloy Pressure CavityJA 100 ohm 2 wire Platinum RTD 0.0385 alphaJB 1000 ohm 2 wire Platinum RTD 0.0385 alphaME Shunt cal, 80% InternalMS Bi-Directional Allows for both positive and negative output, for option 3,
12mA ZeroQU Monel 500 sensor, 400 wetted partsHM 10,000 psi Base Pressure Flange Girdle (not available with option GP)GD 10X PR for proof pressure (may affect overall performance, not available
with options GP,GK,GF and less than 100psid ranges)REQUIRES HM OPTION
MZ Add Mechanical Stop for >5X proof with 1%FSO zero balance
MODEL OUTPUT RANGE PRESSURE TYPE OPTIONS
Example: 7400-2-RH-D-CA/FD/GH
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available, consult factory for moreinformation. Modifications may alter specs.
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Ranges 5 thru 7,500 PSID (Bi-directional or uni-directional)Proof Pressure (High & Low side) 2 X Pressure Range or 10,000 psi whichever is less (Optional 10 X or 10,000 psi whichever is less)Static Line Pressure 3,000 psi (10,000 psi available - HM option)Burst Pressure (High & Low side) 3.0 X Pressure Range or 4,000 psi whichever is less (Optional 15 X or 10,500 psi whichever is less)Zero Balance / Span Balance ±0.5% FSO EachStatic Accuracy (BFSL) <±0.3% FSONon-Repeatability <±0.1% FSONon-Linearity (BFSL) <±0.2% FSOHysteresis <±0.2% FSO
Thermal Error Zero ±1.0% FSO / 100° FSpan ±1.0% FSO / 100° F
Total Error Band (all 5 parameters) ±2.3% FSOLine Pressure Effect (Zero) <±1% FSO at 1,000 psi, <±2.5% FSO at 3,000 psi, (<±5% FSO at 10,000 psi - option HM)Response Time < 4 msExcitation +18 thru +36 Vdc (others available)Input Current 4-Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
40°F to +180°F (Other ranges available)30°F to +190°F (-1°C to +88°C) (Other ranges available)
Wetted Parts 316 SST & 17-4 PH SST (Inconel or Hastelloy optional)Pressure Port MS 33656-4 (M) standardElectrical Connector PTIH-10-6P standardWeight 1.5 lbs. standard (some options may affect weight)Design meets MIL-STD-461/EMI/RFI Some options may affect EMI/RFI ratingOil Fill Silicon Oil
AEROSPACE7171
A5SL-7500.00 Rev E
FEATURES:FEATURES:• Submersible to 23,000 feet seawater• Standard Ranges to 15,000 PSI (Higher optional ranges)• 0-5 Vdc, 0-10 Vdc & 4-20 mA outputs• Rated for Sea water (Exotic materials available)• High accuracy 0.3% RSS (0.1% RSS available)• Temperature output available Heritage Includes:
• Perry Tritech• GD Electric Boat• Oceaneering
GP:50 Aerospace transducers are manufactured and tested to the following MIL-STD & MIL-Spec to insure the highest quality:
• NIST Traceability and Calibration.............................................................................................................................................................................................. ANSI-Z540-1• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Transducer Design Meets: MIL-STD-810F For Shock/Vibration/AccelerationMIL-STD-461
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
SUB SEA PRESSURE / LEVEL TRANSDUCERModel 7500Model 7500
Designed for the tough challenges and environmental rigorsof oilfield, downhole, and deep sea ocean applications.
(4.25)
(Ø1.18)(0.33)
LABEL
STANDARD PORT:SAE AS4320-047/16-20 UNJF-3AVITON O-RING #904
1
(0.389)
(7/8) HEX
2
SEACON CONNECTOR OPTION DH(WITH O-RING FACE SEAL)
2 PIN SEACON CONNECTORXSJJ-2-BCR (OPTION DH)
Units are inches
Typical Applications:• DSRV’s and ROV’s• Oil Platform & Down hole applications• Ocean Pump Stations
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available, consult factory for moreinformation. Modifications may alter specs.
Ranges 50 thru 15,000 PSID (Optional higher ranges available)Proof Pressure 1.5 X Pressure Range or 22,500 psi whichever is lessBurst Pressure 3.0 X Pressure Range or 23,000 psi whichever is lessZero Balance / Span Balance ±0.5% FSO EachStatic Accuracy (BFSL) <±0.3% FSO (0.1% FSO optional)Non-Repeatability <±0.1% FSONon-Linearity (BFSL) <±0.2% FSOHysteresis <±0.2% FSO
Thermal Error Zero ±0.5% FSO / 100° FSpan ±0.5% FSO / 100° F
Total Error Band (all 5 parameters) ±1.3% FSOResponse Time < 4 msExcitation 18V - 36 Vdc (others available)Input Current 4-Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
-30°F to +160°F (-34°C to 71°C)-40°F to 190°F (-40°C to 88°C)
Random Vibration >75 GRMS (20 Hz to 2,000 Hz)Sinusoidal Vibration 7.5 G’s (5 Hz to 100 Hz)Shock > 4,000 G’sConstant Acceleration 5 G’s for 30 minutesWetted Parts 17-4 PH SST (Inconel or Hastelloy optional)Pressure Port SAE 4 (M), (7/16-20 UNF-2A) standardElectrical Connector SEACON XSJJ-2 BCR 2 pin connector (Other options available)Weight 12 oz. (some options may affect weight)
AEROSPACE7373
A5SL-7540.00 Rev F
FEATURES:FEATURES:• Rated to 10,000 PSI/23,000 FT WC• Compact, Rugged Design rated for Seawater• Line and proof pressure options to 10,000 PSI• Manufactured to MIL & MIL-Spec Standards
Model 7540 series is manufactured and tested to the following MIL-STD and MIL-Spec standards to insure the highest quality:
• NIST Traceability and Calibration.............................................................................................................................................................................................. ANSI-Z540-1• Workmanship ............................................................................................................................................................................................... J-001 / NASA 8739.3 standards• Quality System ....................................................................................................................................................................................................................... ISO 9001:2008
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
MARINE SERVICE (SUB SEA) DIFFERENTIAL PRESSURE TRANSDUCERModel 7540Model 7540
Designed for the tough challengesand environmental rigors of undersea service.
Heritage Includes:• Lockheed Martin Maritime• Institute of Ocean Technology• Schilling Robotics
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENTBASED ON ELECTRONICS OPTIONS
Typical Applications:• Mini-sub Hydraulic Systems• Submarine Propulsion Systems• Subsea Oil Well Head Pressures
PIN 4-20 MA 4-WIRE MV/V &VDC ISOLATED
4- WIRE VDCNON-ISOLATED *
3-WIREVDC
A/1 +EXC/SIG +EXC +EXC +EXC
B/2 N/C +SIG +SIG +SIG
C/3 N/C -SIG -SIG * N/C
D/4 -EXC/SIG -EXC -EXC * -EXC/-SIG
E/5 N/C N/C N/C N/C
F/6 N/C N/C N/C N/C
* COMMONS JUMPERED
WIRING CODEWIRING CODE
STANDARD WIRINGOPTIONS MAY AFFECT PIN OUT
Units are inches
AEROSPACE7474
ORDERING GUIDE:ORDERING GUIDE:
MODEL OUTPUT RANGE PRESSURETYPE OPTIONS
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
MISC:GF 0-120ºF on oil filled undersea unitsGH 100% Internal ShuntGK Inconel Pressure CavityGL Cleaning for oxygen serviceGP Hastelloy Pressure CavityJA 100 ohm 2 wire Platinum RTD, 0.0385 alphaJB 1000 ohm 2 wire Platinum RTD, 0.0385 alphaME Shunt cal, 80% InternalMS Bi-Directional Allows for both positive & negative output, for option 3, 12mAQU Monel 500 sensor, 400 wetted partsHM 10,000 psi Base Pressure Flange GirdleGD 10X PR for proof pressure (may affect overall performance, not available
with options GP,GK,GF and less than 100 psid ranges)MZ Add Mechanical Stop for >5X proof with 1% FSO zero balance
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available, consult factory for moreinformation. Modifications may alter specs.
Ranges 30 thru 7,500 PSID (Bi-directional or uni-directional)Maximum Depth Pressure 10,000 PSI (23,000 Ft of seawater)Proof Pressure (High or Low side) 2 X Pressure Range or 10,000 psi whichever is less (10X optional)Static Line Pressure 3,000 psi or (10,000 psi-HM option)Burst Pressure (High or Low side) 3.0 X Pressure Range or 10,500 psi whichever is less (15 X optional)Zero Balance / Span Balance ±0.5% FSO EachStatic Accuracy (BFSL) <±0.3% FSONon-Repeatability <±0.1% FSONon-Linearity (BFSL) <±0.2% FSOHysteresis <±0.2% FSO
Thermal Error Zero ±1.0% FSO / 100° FSpan ±1.0% FSO / 100° F
Total Error Band (all 5 parameters) ±2.3% FSOLine Pressure Effect (Zero) <±1% FSO at 1,000 psi, <±2.5% FSO at 3,000 psi, (<±5% FSO at 10,000 psi - option HM)Response Time < 4 msExcitation 18V - 36 Vdc (others available)Input Current 4-Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
20°F to 70°F (Expanded ranges available)20°F to 70°F (Expanded ranges available)
Wetted Parts 316 SST & 15-5 PH or 17-4 PH SST (Inconel or Monel optional)Pressure Port MS 33656-4 (M) (7/16-20) standardElectrical Connector See connector optionsWeight 2.0 lbs 2.5 lbs with option HM (some options may affect weight)
AEROSPACE7575
A5SL-7710.00
FEATURES:FEATURES:• -320°F to +70°F standard medium• High accuracy, 3% FSO standard (1% available)• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810• 2 second time response, 0.5 sec optional• 100 ohm platinum RTD standard
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MILSTD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
4-20 mA PIN OUT Vdc PIN OUT
A + EXC./SIGNAL OUT + EXC.B NC +SIGNAL OUTC NC -SIGNAL OUTD - EXC./SIGNAL OUT - EXC.E SHUNT OPTION SHUNT OPTIONF SHUNT OPTION SHUNT OPTION
LENGTH DEPENDS ON OPTIONS, E.I. RFI/EMI
3.8 TYP.D38999,SERIES III
18” ARMOUR CABLE
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
CRYOGENIC TEMPERATURE TRANSDUCERModel 7710Model 7710
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc
Static Accuracy 3% FSO at 1% optional
Weight 8 oz. (approx.)
Electrical Connector MIL PTIH-10-6P, D38999 series III optional
Response Time 2 seconds, 0.5 sec optional
Meets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI
Flex Tubing 18” Armored Capillary Tube
System Pressure Designed for up to 2000 psi system pressure.Higher system pressure designs available, contact factory.
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
AEROSPACE7777
A5SL-7720.00 Rev B
FEATURES:FEATURES:• High accuracy, 0.3% RSS standard (0.1% available)• -320°F to +70°F standard medium• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810
4-20 mA PIN OUT Vdc / mV/V PIN OUT
A + EXC./SIGNAL OUT + EXC.B NC +SIGNAL OUTC NC -SIGNAL OUTD - EXC./SIGNAL OUT - EXC.E SHUNT OPTION SHUNT OPTIONF SHUNT OPTION SHUNT OPTION
18” ARMOUR CABLE
2.4 REF.
4.2 REF.
PTIH-10-6P
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
PRESSURE TRANSDUCER FOR CRYOGENIC ENVIRONMENTSModel 7720Model 7720
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MILSTD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Units are in inches
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Example: 7720-2-RH-G-CA/FD/GH
Ranges 15 thru 15,000 PSIA, PSIG or PSISG optionsFS Output at Rated Pressure 3 mV/V at 10 Vdc / 0-5 Vdc / 4-20 dcmA Isolated options
Temperature Output 100 ohm 2 wire platinum RTD optional,1000 ohm 2 wire platinum RTD also available
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc / 9 to 36 Vdc Unregulated
Non-Repeatability <0.1% FSONon-Linearity <0.2% FSOHysteresis <0.2% FSOStatic Accuracy RSS <0.3% FSO RSS, 0.1% optionalPressure Medium (Wetted Materials) 316SS (Inconel, Hastelloy, Monel optional)Operating / Environmental Temperature -320°F to +70°F / -200°C to +20°CWeight 8 oz. (approx.)Electrical Connector MIL PTIH-10-6P, D38999 series III optionalResponse Time < 4 msMeets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI ratingFlex Tubing 18” Armored Capillary Tube
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
FEATURES:FEATURES:• High accuracy, 0.3% RSS standard (0.1% available) pressure• High accuracy, 3% FSO standard (1% available) temperature• -320°F to +70°F standard medium• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810• 2 second time response for temperature, 0.5 sec optional• 100 ohm platinum RTD standard
LENGTH DEPENDS ON OPTIONS, E.I. RFI/EMI
3.8 TYP.D38999,SERIES III
18” ARMOUR CABLE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
DUAL CRYOGENIC TEMPERATURE & PRESSURE TRANSDUCERModel 7730Model 7730
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MILSTD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Units are in inches
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
PRESSURE RANGE (PSI)“Consult Factory for Higher Ranges”
PRESSURE TYPEA Sealed Absolute, ref to vacuumG Gauge, ref to atmosphereSG Sealed Gauge, ref to 14.7 psia
MODEL OUTPUT RANGE PRESSURETYPE OPTIONS
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Example: 7730-2-RH-G-CA/FD/GH
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges 15 thru 15,000 PSIA, PSIG or PSISG optionsFS Output at Rated Pressure 0-5 Vdc / 4-20 dcmA Isolated options
FEATURES:FEATURES:• +70°F to + 700°F standard medium• High accuracy, 3% FSO standard (1% available)• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810• 2 second time response for temperature, 0.5 sec optional• 100 ohm platinum RTD standard
LENGTH DEPENDS ON OPTIONS, E.I. RFI/EMI
3.8 TYP.D38999,SERIES III
18” ARMOUR CABLE
4-20 mA PIN OUT Vdc PIN OUT
A + EXC./SIGNAL OUT + EXC.B NC +SIGNAL OUTC NC -SIGNAL OUTD - EXC./SIGNAL OUT - EXC.E SHUNT OPTION SHUNT OPTIONF SHUNT OPTION SHUNT OPTION
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
EXTREME HIGH TEMPERATURE TRANSDUCERModel 7770Model 7770
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Example: 7770-2-CA/FD/GH
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges +70°F to +700°F/ +20°C to +370°CFS Output 3 mV/V at 10 Vdc / 0-5 Vdc / 4-20 dcmA / Isolated ptions
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc
Static Accuracy 3% FSO 1% optional
Weight 8 oz. (approx.)Electrical Connector MIL PTIH-10-6P, D38999 series III optionalResponse Time 2 seconds, (0.5 sec optional)
Meets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI ratingFlex Tubing 18” Armored Capillary TubeSystem Pressure Designed for up to 2000 psi sytem pressure.
AEROSPACE8383
A5SL-7780.00 Rev A
FEATURES:FEATURES:• High accuracy, 0.3% RSS standard (0.1% available)• +70°F to + 400°F standard medium• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Designed to meet vibration and shock per MIL-STD-810
4-20 mA PIN OUT Vdc PIN OUT
A + EXC./SIGNAL OUT + EXC.B NC +SIGNAL OUTC NC -SIGNAL OUTD - EXC./SIGNAL OUT - EXC.E SHUNT OPTION SHUNT OPTIONF SHUNT OPTION SHUNT OPTION
2.4 REF.
4.2 REF.
18” ARMOUR CABLEPTIH-10-6P
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
PRESSURE TRANSDUCER FOR HIGH TEMPERATURE ENVIRONMENTSModel 7780Model 7780
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
PRESSURE TYPEA Sealed Absolute, ref to vacuumG Gauge, ref to atmosphereSG Sealed Gauge, ref to 14.7 psia
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Temperature Sensor 100 ohm 2 wire platinum RTD optional1000 ohm 2 wire platinum RTD also available
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc / 9 to 36 Vdc Unregulated
Non-Repeatability <0.1% FSONon-Linearity <0.2% FSOHysteresis <0.2% FSOStatic Accuracy RSS <0.3% FSO RSS, 0.1% optionalPressure Medium (Wetted Materials) 316SS (Inconel, Hatelloy, Monel optional)Operating/Environmental Temperature +70°F to +400°F / +20°C to +200°CWeight 8 oz. (approx.)Electrical Connector MIL PTIH-10-6P, D38999 series III optionalResponse Time < 4msMeets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI ratingFlex Tubing 18” Armored Capillary Tube
AEROSPACE8585
A5SL-7790.00 Rev B
FEATURES:FEATURES:• High accuracy, 0.3% RSS standard (0.1% available) pressure• High accuracy, 3% FSO standard (1% available) temperature• +70°F to +400°F standard medium• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810• 2 second time response for temperature, 0.5 sec optional• 100 ohm platinum RTD standard
LENGTH DEPENDS ON OPTIONS, E.I. RFI/EMI
18” ARMOUR CABLE
D38999,SERIES III3.8 TYP.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
DUAL HIGH TEMPERATURE PRESSURE & TEMPERATURE TRANSDUCERModel 7790Model 7790
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
PRESSURE TYPEA Sealed Absolute, ref to vacuumG Gauge, ref to atmosphereSG Sealed Gauge, ref to 14.7 psia
MODEL OUTPUT RANGE PRESSURETYPE OPTIONS
Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Example: 7790-2-RH-G-CA/FD/GH
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges 15 thru 15,000 PSIA, PSIG or PSISG optionsFS Output at Rated Pressure 3 mV/V at 10 Vdc / 0-5 Vdc / 4-20 dcmA / Isolated ptions
Temperature Sensor 100 ohm 2 wire platinum RTD optional1000 ohm 2 wire platinum RTD also available
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc / 9 to 36 Vdc Unregulated
Non-Repeatability <0.1% FSONon-Linearity <0.2% FSOHysteresis <0.2% FSOStatic Accuracy RSS (pressure) <0.3% FSO RSS, 0.1% optionalStatic Accuracy (Temperature) <0.3% FSO RSS, 0.1% optionalPressure Medium (Wetted Materials) 316SS (Inconel, Hatelloy, Monel optional)Operating/Environmental Temperature +70°F to +400°F / +20°C to +200°CWeight 8 oz. (approx.)Electrical Connector MIL PTIH-10-6P, D38999 series III optionalResponse Time < 4msMeets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI ratingFlex Tubing 18” Armored Capillary Tube
AEROSPACE8787
A5SL-7800.00 Rev A
FEATURES:FEATURES:• -100°F to +250°F standard medium• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810• 2 second time response, 0.5 sec optional• 100 ohm platinum RTD standard
4-20 mA PIN OUT Vdc PIN OUT
A + EXC./SIGNAL OUT + EXC.B NC +SIGNAL OUTC NC -SIGNAL OUTD - EXC./SIGNAL OUT - EXC.E SHUNT OPTION SHUNT OPTIONF SHUNT OPTION SHUNT OPTION
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
TEMPERATURE TRANSDUCERModel 7800Model 7800
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• High Vibration Environments• Extreme or Harsh Environments• Manifolds, Propulsion Systems• Military and Defense Applications
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges -100°F to +250°F / -75°C to +120°CFS Output 3 mV/V at 10 Vdc / 0-5 Vdc / 4-20 dcmA / Isolated ptions
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc
Static Accuracy RSS 3% FSO RSS, 1% optionalWeight 8 oz. (approx.)Electrical Connector MIL PTIH-10-6P, D38999 series IIIResponse Time 2 seconds, (0.5 sec optional)Meets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI ratingFlex Tubing 18” Armored Capillary Tube
System Pressure Designed for up to 2000 psi sytem pressure.Higher system pressure designs available, contact factory.
AEROSPACE8989
A5SL-7880.00 Rev A
FEATURES:FEATURES:• High accuracy, 0.3% RSS standard (0.1% available)• -100°F to +250°F standard medium• Lightweight, 8 ounces• Hydrogen and LOX compatibility• Custom probe lengths, 1.55” standard• Designed to meet vibration and shock per MIL-STD-810• 2 second time response for temperature, 0.5 sec optional• 100 ohm platinum RTD standard
4-20 mA PIN OUT Vdc PIN OUT
A + EXC./SIGNAL OUT + EXC.B NC +SIGNAL OUTC NC -SIGNAL OUTD - EXC./SIGNAL OUT - EXC.E SHUNT OPTION SHUNT OPTIONF SHUNT OPTION SHUNT OPTION
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
DUAL TEMPERATURE & PRESSURE TRANSDUCERModel 7880Model 7880
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• High Vibration Environments• Manifolds, Propulsion Systems• Military and Defense Applications
Units are inches
AEROSPACE9090
ORDERING GUIDE:ORDERING GUIDE:Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
MISC:D Improved Accuracy to 0.1% Pressure, and 1% TemperatureGB Alternate Full Scale OutputsGH 100% Internal ShuntGK Inconel Pressure CavityGL Cleaning for oxygen serviceGP Hastelloy Pressure CavityGU Monel Pressure CavityJB 1000 ohm 2 wire RTDME Shunt Cal, 80% InternalQV Improved response time to 0.5 seconds
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Excitation or Input VoltageReverse Polarity Protected 18 to 36 Vdc
Non-Repeatability <0.1% FSONon-Linearity <0.2% FSOHysteresis <0.2% FSOStatic Accuracy RSS (Pressure) <0.3% FSO RSS, 0.1% optionalStatic Accuracy (Temperature) 3% FSO, 1% optionalPressure Medium (Wetted Materials) 316SS (Inconel, Hatelloy, Monel optional)Operating/Environmental Temperature -100°F to +250°F / -75°C to +120°CWeight 8 oz. (approx.)Electrical Connector MIL PTIH-10-6P, D38999 series IIIResponse Time < 4ms pressure, 2 seconds for temperature (0.5 sec optional)Meets MIL-STD-461/462 EMI/RFI Some options will affect EMI/RFI rating
AEROSPACE9191
A5SL-7900.00 Rev B
FEATURES:FEATURES:• Under 55 grams mass (depending on desired options)• High Accuracy, 0.3% RSS standard (0.1% RSS available)• Flow-Thru design• Isolated outputs for EMI/RFI• Optional Temperature compensation ranges• Temperature (RTD) output optional• Shock and Vibration tested to MIL-STD-810C&E requirements
Heritage Includes:• NASA Goddard• NASA Marshall
0.10 REF.
1.00 DIA.
18.5°.069.125
0.725
3.3 REF.
0.750
2.90 REF.
0.750
0.340+.000-.002
1.2250.070
2.4 REF.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• Miniature Propulsion Platforms• Space Vehicles• Satellite Propulsion• Launch Vehicles• Life Support Systems
Units are inches
AEROSPACE9292
ORDERING GUIDE:ORDERING GUIDE:Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
PORTSFA MS33649-4, 7/16-20 (F)FD MS33656-4, 7/16-20 (M)IF Welded 1/8” ID SS Tube
MISC:D Improved Accuracy to 0.1%GF Expanded process temperature range, -65 to 250°F (±2% FSO/100°F)GH 100% Internal ShuntGL Cleaning for oxygen serviceJA 100 ohm 2 wire RTDJB 1000 ohm 2 wire RTDME Shunt Cal, 80% Internal
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Non-Repeatability <0.1% FSONon-Linearity <0.2% FSOHysteresis <0.2% FSOStatic Accuracy RSS <0.3% FSO RSS, 0.1% optionalError Band (all 5 parameters) 1.0% standardPressure Medium (Wetted Materials) 316SSTemperature Compensation -20° to +120°F / -30° to +50°C, expanded range optionalOperating/Environmental Temperature -100°F to +250°FWeight <55 gramsPressure Port Welded 1/4” ID SS Tube, flow through, in-line design (other ports available)Electrical Connector MIL PTIH-10-6P (other connectors available)Response Time < 4msMeets MIL-STD-461/462 EMI/RFI & 810C & E Some options will affect EMI/RFI rating
AEROSPACE9393
A5SL-7901.00 Rev B
FEATURES:FEATURES:• <3 mV peak-to-peak noise on output• Under 55 grams mass (depending on desired options)• High Accuracy, 0.3% RSS standard (0.1% RSS available)• “S” Class electronics available• Rad-Hard 100 KRAD optional• Flow-Thru design• Isolated outputs for EMI/RFI• Optional temperature compensation ranges• Temperature (RTD) output optional• Shock and Vibration tested to MIL-STD-810C&E requirements
0.10 REF.
1.00 DIA.
18.5°.069.125
0.725
3.3 REF.
0.750
2.90 REF.
0.750
0.340+.000-.002
1.2250.070
2.4 REF.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Heritage Includes:• NASA Goddard• NASA Marshall
SPACE QUALIFIED IN-FLOW, LIGHTWEIGHT,LOW NOISE PRESSURE TRANSDUCERModel 7901Model 7901 “S” Class Electronics Available
Designed for the tough challenges and environmental rigorsof space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810 C&EMIL-STD-461/462 D&E
Typical Applications:• Miniature Propulsion Platforms• Space Vehicles• Satellite Propulsion• Launch Vehicles• Life Support Systems
Units are inches
AEROSPACE9494
ORDERING GUIDE:ORDERING GUIDE:Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
PORTSFA MS33649-4, 7/16-20 (F)FD MS33656-4, 7/16-20 (M)IF Welded 1/8” ID SS Tube
MISC:D Improved Accuracy to 0.1%GF Expanded process temperature range, -65 to 250°F (±2% FSO/100°F)GH 100% Internal ShuntGL Cleaning for oxygen serviceJA 100 ohm 2 wire RTDJB 1000 ohm 2 wire RTDME Shunt Cal, 80% Internal
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges 15 thru 5,000 PSIA, PSIG or PSISG optionsFS Output at Rated Pressure 3 mV/V, 0-5 Vdc Isolated, 0-10 Vdc IsolatedProof Pressure 1.5XBurst Pressure 2.0XExcitation or Input VoltageReverse Polarity Protected 5 Vdc, 12Vdc, 18V to +36 Vdc Isolated
Non-Repeatability <0.1% FSONon-Linearity <0.2% FSOHysteresis <0.2% FSOStatic Accuracy RSS <0.3% FSO RSS, 0.1% optionalError Band (all 5 parameters) 1.0% standardPressure Medium (Wetted Materials) 316SSTemperature Compensation -20° to +120°F / -30° to +50°C, expanded range optionalOperating/Environmental Temperature -100°F to +250°FWeight <55 gramsPressure Port Welded 1/4” ID SS Tube, flow through, in-line design (other ports available)Electrical Connector MIL PTIH-10-6P (other connectors available)Response Time < 4msMeets MIL-STD-461/462 EMI/RFI & 810C & E Some options will affect EMI/RFI rating
AEROSPACE9595
A5SL-8200.00 Rev C
FEATURES:FEATURES:• High accuracy, 0.08% RSS standard (0.05% RSS available)• Proprietary mechanical isolation of the sensor for zero stability• Cavity material options for extreme environments• 10X overload option• 0-5 Vdc Isolated or 0-10 Vdc Isolated digitally corrected output• 100 G’s Pk/Pk (3500 G shock), 1 Hr / Axis qualified• Over 1,000,000 continuos cycles• “B+” and “S” class electronics available• Cleaning to MIL-STD-1246 available• Serial port (RS-232) controlled zero & span adjustment
(0.44)
STENCIL LOCATION(MARKING INFORMATION)
OPTION CACONNECTOR
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
Ø0.107 BREATHER HOLEWITH BREATHER PLUG(HYDROPHOBIC) INSERT(FOR PSIG UNITS ONLY)
ø1.00)
(7/8’)HEX
(0.33)
(0.55)
(4.72)
ABCE
F
D
OPTION FDPORT
Ø0.107 BREATHER HOLEWITH BREATHER PLUG(HYDROPHOBIC) INSERT(FOR PSIG UNITS ONLY)
ø1.50)
(1.31)HEX
(0.33)
(4.68)OPTION CACONNECTOR
(0.44)
STENCIL LOCATION(MARKING INFORMATION)
(0.55)
(1.18)
OPTION FDPORT
NOTES:1. WEIGHT = 5.0 OZ WITH MODULE2. HIGH LEVEL 0-5 VDC, 0-10 OUTPUT3. 5000 OHM GAUGES4. -65° TO +250°F OR COMPENSATED
TEMPERATURE RANGES
PIN OUTFOR OPTIONS 4, 6
A/1 + EXCITATIONB/2 + SIG. OUTC/3 N/CD/4 COMMONE/5 TXF/6 RX
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
FLIGHT QUALIFIED HIGH LEVEL DIGITALLYCORRECTED PRESSURE TRANSDUCER
Model 8200Model 8200 “B+” and “S” Class Electronics AvailableDesigned for the tough challenges and environmental rigors
of space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges 3 thru 15,000 PSIA, PSIG or PSISG optionsFS Output at Rated Pressure 0-5 Vdc Isolated or 0-10 Vdc Isolated Digitally corrected outputProof Pressure 1.5X with 25 psia min, 10X optionalBurst Pressure 3.0X (4500 secondary containment) (300 min)Excitation or Input VoltageReverse Polarity Protected 18 V - 36 Vdc Unregulated, +12, +15 Vdc Regulated
Static Accuracy RSS <0.08% FSO RSS, 0.05% optionalError Band (all 5 parameters) 0.5% FSOPressure Medium (Wetted Materials) 316SS port, 15-5 sensor (Inconel, Hastelloy optional)Temperature Compensation -10°F to +180°F / -20°C to +80°C, expanded range optionalOperating/Environmental Temperature -20°F to +190°F / -30°C to +90°CWeight 5 oz. (some options may affect weight)Pressure Port MS 33656-4 (M)Electrical Connector PTIH-10-6P, MIL D38999 series IIIShunt Cal 80% Option InternalVibration, Shock, AccelerationDesigns meets MIL-STD-810C&E requirement
25 Grms / 100G’s Pk/Pk / 3500 G Pyroshock / 12g
Response Time 500 ms (12 BIT Processor)Meets MIL-STD-461/462 EMI/RFI & 810C & E Some options will affect EMI/RFI rating
AEROSPACE9797
A5SL-8300.00 Rev C
FEATURES:FEATURES:• High accuracy, 0.08% RSS standard (0.05% RSS available)• Extremely lightweight, <8 oz.• Mechanical isolation tube eliminates zero shift• Cavity material options for special environments• Zero shift with line pressure <1%• 0-5 Vdc Isolated or 0-10 Vdc Isolated digitally corrected output• Non-Oil filled• Serial port (RS-232) controlled zero & span adjustment
Heritage Includes• NASA• Lockheed Martin
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
1.00
1.00
4.82
7/8 HEX
CONNECTOR OPTION CA
5.07
1.50
STD = 3.70LP = 4.63
1.31 HEX
STANDARDPR > 100 PSI
LOW PRESSUREPR ≤ 100 PSI
PIN OUT FOR OPTIONS 4, 6
A + EXC.B + SIG. OUTC - SIG. OUTD - EXC.E TXF RX
WIRING CODEWIRING CODE
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Model 8300Model 8300Designed for the tough challenges and environmental rigors
of space propulsion and aviation pressure testing.
All GP:50 Aerospace pressure transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure thehighest quality assurance:
• NIST Traceability and Calibration....................................................................................................................................................................................... MIL-STD-45662A• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008
Designed to: MIL-STD-810F All MethodsMIL-STD-461E
Typical Applications:• High Accuracy, Rugged Field Test Applications and Vehicles• Space Qualified Flight Hardware Requirements• Satellites• Launch Vehicles
Units are inches
AEROSPACE9898
ORDERING GUIDE:ORDERING GUIDE:Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges 15 thru 1000 PSID / bi-directional or uni-directionalFS Output at Rated Pressure 0-5 Vdc Isolated or 0-10 Vdc Isolated Digitally corrected outputDifferential Overload Pressure 1500 PSI may be applied to either port, 10,000 lb optionZero Shift <1% FSO with line pressure appliedExcitation or Input VoltageReverse Polarity Protected +18 thru +36 Vdc isolated
Static Accuracy RSS <0.08% FSO RSS, 0.05% optionalTotal Error 0.5% (All 5 parameters)Wetted Materials 316SS (Inconel, Hastelloy optional)Temperature Compensation -10°F to +160°F standard, custom availableOperating/Environmental Temperature -30°F to +170°F / -30°C to +255°C, -65°F to +250°F optionWeight 8 oz. (some options may affect weight)Pressure Port MS 33656-4 (M) standardElectrical Connector PTIH-10-6PResponse Time 500 ms (12 BIT Processor)Meets MIL-STD-461 EMI/RFI Some options will affect EMI/RFI rating
AEROSPACE9999
FEATURES:FEATURES:• Digital Correction provides accuracies of ±0.10% RSS (±0.08% option)• High static line rating up to 10,000 PSI options• 0-5 Vdc, 0-10 Vdc and 4-20 mA outputs• Serial communication (RS-232) options• Rugged, SST construction• Exotic wetted parts available• Temperature output options
(1.8)REF
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
GP:50 Aerospace transducers are manufactured and tested to the following MIL-STD and MIL-Spec to insure the highest quality:
• NIST Traceability and Calibration....................................................................................................................................................................................... ANSI-Z540-1• Workmanship .............................................................................................................................................................................................. J-001 / NASA 8739.3 standards• Quality System ...................................................................................................................................................................................................................... ISO 9001:2008Designed to: MIL-STD-810
MIL-STD-461
(2.3)REF
(5.5)REF
0.450
MS33656-47/16-20 UNJF-3A (M)
BOTH ENDS 7/8” HEX
PT1H-10A-6PCONNECTORSTANDARD
Ø1.00
A5SL-8400.00 Rev C
Typical Applications:• Ground Support Systems• Ground & Engine Test• Aircraft Systems / Avionics
PIN 4-20 MA 4-WIRE MV/V &VDC ISOLATED
4- WIRE VDCNON-ISOLATED *
3-WIREVDC
A/1 +EXC/SIG +EXC +EXC +EXC
B/2 N/C +SIG +SIG +SIG
C/3 N/C -SIG -SIG * N/C
D/4 -EXC/SIG -EXC -EXC * -EXC/-SIG
E/5 N/C N/C N/C N/C
F/6 N/C N/C N/C N/C
* COMMONS JUMPERED
WIRING CODEWIRING CODE
STANDARD WIRINGOPTIONS MAY AFFECT PIN OUT
Units are inches
AEROSPACE100100
ORDERING GUIDE:ORDERING GUIDE:Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
MISC:GB Alternate Full Scale OutputsGF Expanded process temperature range, -10 to 200°F (±2% FSO/100°F)GH 100% Internal ShuntGK Inconel Pressure CavityGL Cleaning for oxygen serviceGP Hastelloy Pressure CavityJA 100 ohm 2 wire Platinum RTD 0.0385 alphaJB 1000 ohm 2 wire Platinum RTD 0.0385 alphaME Shunt cal, 80% InternalMS Bi-Directional allows for both positive & negative output,
for option 3, 12mA ZeroQU Monel 500 sensor, 400 wetted partsHM 10,000 psi Base Pressure Flange GirdleGD 10X PR for proof pressure (may affect overall performance, not available w/
options GP, GK, GF and less than 100psid ranges) REQUIRES HM OPTIONMZ Add Mechanical Stop for >5X proof with 1%FSO zero balance.
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
Ranges 5 thru 7,500 PSID (Bi-directional or uni-directional)Proof Pressure (High & Low side) 2 X Pressure Range or 10,000 psi whichever is less (Optional 10 X or 10,000 psi whichever is less)Static Line Pressure 3,000 psi (10,000 psi available - HM option)Burst Pressure (High & Low side) 3.0 X Pressure Range or 10,500 psi whichever is less (Optional 10 X or 10,500 psi whichever is less)Zero Balance / Span Balance ±0.5% FSO EachStatic Accuracy (BFSL) <±0.1% FSO BFSL (±0.08% available)Non-Repeatability <±0.05% FSONon-Linearity (BFSL) <±0.06% FSOHysteresis <±0.06% FSO
Thermal Error Zero ±0.5% FSO / 100° FSpan ±0.5% FSO / 100° F
Total Error Band (all 5 parameters) ±1.1% FSOLine Pressure Effect (Zero) ±1% FSO at 1,000 psi, <±2.5% FSO at 3,000 psi, (<±5% FSO at 10,000 psi - option HM)Response Time <500 ms for Vdc outputs units, <14 ms for 4-20 mA output (<14 ms for Vdc option - consult factory)Excitation +18 thru +36 Vdc (others available)Input Current 4-Wire Isolated Vdc Options - 45mA nominal / Non-Isolated Vdc -10mA nominalOutput Current (VDC Units) 2 mA max for <0.1% FSO attenuationLoad Impedance (4-20mA Units) 1,350 ohms max. at 36 Vdc, 750 ohms max. at 24 Vdc, 300 ohms max. at 18 VdcTemperature Limits
CompensatedOperating
40°F to +180°F (Other ranges available)30°F to +190°F (-1°C to +88°C) (Other ranges available)
Wetted Parts 316 SST & 17-4 PH SST (Inconel or Hastelloy optional)Pressure Port MS 33656-4 (M), (7/16-20) standardElectrical Connector PTIH-10-6P standardWeight 1.5 lbs standard (some options may affect weight)Meets MIL-STD-461 EMI/RFI Some options may affect EMI/RFI ratingOil Fill Silicon Oil
AEROSPACE101101
A5SL-8500.00 Rev C
FEATURES:FEATURES:• Submersible to 22,000 feet seawater(options may affect operating depth)
• Optional reference standards, PSIA, PSIS, PSIG, PSID• 0-5 Vdc Isolated or 0-10 Vdc Isolated digitally corrected output• Cavity material options for special environments• High accuracy, 0.08% RSS standard (0.05% RSS available)• Designed for over 1,000,000 continuous cycles• Serial port (RS-232) controlled zero & span adjustment
(5.82)(1.29)
0-5 VOLTSPIN OUT FOR OPTIONS 4, 6
A/1 + EXC.
B/2 + SIGNALC/3 - SIGNAL
D/4 - EXC.
E/5 RS 232 TX
F/6 RS 232 TX
6 PIN SEACON CONNECTORXSEE-6-BCR (OPTION DF)
(Ø1.18)
(0.38)
PRESSURE PORT (FA)(7/16-20 UNJF-3A)
(0.875)HEX
(Ø1.25)
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Heritage Includes:• University of Texas• Woods Hole Oceanography Institute• Phoenix International
Designed for the tough challenges and environmental rigorsof oilfield, downhole, and deep sea ocean applications.
SEE INSTALLATION MANUAL FOR PINOUT ASSIGNMENT BASED ON ELECTRONICS OPTIONS
All GP:50 Aerospace differential transducers are manufactured and tested to the following MIL-STD and MIL-Spec standards to insure the highest qualityassurance:
• NIST Traceability and Calibration.............................................................................................................................................................................. ANSI-Z540-1• Workmanship ........................................................................................................................................................................ J-001 / NASA 8739.3 standards• Quality System .................................................................................................................................................................................. ISO 9001:2008
Designed to: MIL-STD-810F For Shock/Vibration/Acceleration
Typical Applications:• Depth / Level Sensing• Seawater Submersible, DSRV’s and ROV’s• Oil Platform and Downhole Applications• Ocean Pump Stations
Units are inches
AEROSPACE102102
ORDERING GUIDE:ORDERING GUIDE:Some options will affect dimensions, consult factory if important.Use the following codes to identify desired item.
Specifications and options reflect standard product, other improved performance / mechanical / electrical / options available,consult factory for more information. Modifications may alter specs.
-10°F to +180°F (-20°C to +80°C) expanded range optional-20°F to +190°F (-30°C to +90°C)
Weight 8 oz. (some options may affect weight)Pressure Port SAE 4 (M), options availableElectrical Connector SEACON XSEE-6-BCR 6 pin connectorShunt Cal 80% optional InternalResponse Time 500 ms (12 BIT Processor)Meets MIL-STD-461 EMI/RFI Some options will affect EMI/RFI rating
WASTE WATER103103
40 FT OF 24 AWG MULTI-CONDUCTORPOLYURETHANE CABLE WITH INTEGRALVENT TUBE, SHIELD & DRAIN WIRE
1/2 NPT (M)
Ø1.50
4.17 REF
SENSING DIAPHRAGM
8 STAND OFF BOLTS(2 REMOVED FOR CLARITY)
PROTECTIVE STANDOFF PLATE
Ø3.8 REF
7.12 REF
POROUS BREATHER ATTACHEDTO ATMOSPHERIC VENT TUBE
GP:
50PR
ESSU
RE
TRA
NSD
UC
ERTE
L:(7
16)7
73-9
300
S/N
PAR
T#
SUBMERSIBLE LIFT STATION / SLUDGE LEVEL TRANSMITTERModel 311-M351Model 311-M351
Accuracy:• Static error band (Includes Hysteresis, Non-linearity, Non-Repeatability)
±0.5% FSO RSS, standard, ±0.25% FSO (RSS) optionalTemperature Limits:• Compensated: 0º F to +140º F• Operating Models 111, 211, 311: -40º F to +150º F• Effect on Zero & Span: Less than ±2.0% FSO/100°F for each.Electricals:• Excitation Voltage:
(Model 211) 50,000 ohms min. for less than 0.1% FSO attenuation(Model 311) 1350 ohms max. at 36 Vdc & 750 ohms at 24 Vdc
• Range Calibration Signal:(Model 111) Resistance value provided on calibration card for 100% FSO(Model 211 & 311) see option GH
• Zero Balance: ±1% FSO at 70°F• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°F• Resolution: infiniteMechanicals:• Proof Pressure: 2 X full scale pressure• Burst Pressure: 5 X full scale pressure• External Pressure: 500 psi max.• Case Materials: Types 316 SST• Weight: 5.5 lbs.• Materials in contact with measured fluids: Type 316 SSTConnections:• Pressure: Oil filled diaphragm• Electrical: 1/2” NPT conduit with molded polyurethane jacket.Identification:• SST name plate welded to body
111 211 311/311Z
Some options will affect dimensions. Consult factory if important.
GP:50 reserves the right to make product improvements and amendments to theproduct specifications stated throughout this brochure without prior notification.
Please contact the factory on all critical dimensions and specifications for verification.
Approvals
A5SL-311M351.00 Rev C
FEATURES:FEATURES:• All-welded, stainless steel construction• Rugged, all encapsulated electronics• Leakproof• Intrinsically safe• RFI and surge protection• 3 mV/V, 0-5 Vdc, 4-20 mA outputs
PRESSURE RANGES:PRESSURE RANGES:• From 0-5 to 0-500 psi
APPLICATIONS:APPLICATIONS:• Raw sewage wetwells• Lift station level• Process sumps• Water tanks and reservoirs
ACCURACY:ACCURACY:• 0.5% FSO standard, 0.25% available
CT Tefzel jacketed cable.GA Standardized output to ±0.5% FSO.GB Alternate output, pressure units, or full scale outputs that are
non-standard.GE Improved temperature compensation to ±0.5% FSO unless otherwise
specified.GG Alternate Calibration signal.GH Internal calibration resistor set to 100 ±0.5% FSO unless otherwise
specified.GS 0-10 Vdc FSO, Model 211 (Requires 16-32 Vdc excitation).JH Remote cable mounted (in-line) zero & span controls. 3’ cable on
open side. Length of cable on closed side as required.(500’ maximum) Model 311 only.
GZ Customer special.G2 Lightning Protection
Typical configurations (consult factory for more options)
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
SUBMERSIBLE LIFT STATION / SLUDGE LEVEL TRANSMITTERModel 311-M351Model 311-M351
WASTE WATER105105
SUBMERSIBLE LEVEL TRANSMITTERModel 313LModel 313L
FEATURES:FEATURES:• All welded, SST construction• Rugged, all encapsulated electronics• Leakproof• Many options to solve your problems
PRESSURE RANGES:PRESSURE RANGES:• From 0-3 thru 0-100 psig
ACCURACY:ACCURACY:• From ±0.1% FSO to ±0.5% FSO (RSS)(see specifications)
REDBLACKSHIELD
WIRING:
+EXC./SIGNAL-EXC./SIGNALOPEN
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:Static error band (Includes Hysteresis, Non-linearity, Non-Repeatability)• Series B: ±0.5% FSO RSS• Series C: ±0.2% FSO RSS• Series D: ±0.1% FSO RSSLong Term Stability: ≤ +0.5% FSO / yearResolution: InfiniteTemperature Limits:• Compensated: 0º F to +140º F• Operating: -40º F to +150º F• Storage: -40º F to +150º F• Effect on Zero & Span: Less than ±2.0% FSO/100°F at full scale
pressure range and/or upper range limit.Electricals:• Excitation Voltage: 12-40 Vdc• Output at 70º F: 4-20 mA ±2% FSO• Zero Balance: 4.0mA ±2% FSO at 70º F• Span: 16.0mA ±2% FSO at 70º F• Load Impedance: 1400 ohm maximum at 40 Vdc excitation.• Circuit Protection: Short Circuit - Indefinite, Reversed Wired - Indefinite• Insulation Resistance: Greater than 10 megohms at 50 Vdc and 70°FMechanicals:• Proof Pressure: 2 X rated full scale pressure• Burst Pressure: 4 X rated full scale pressure• External Pressure: 500 psi maximum• Case Material: Type 316 SST• Pressure Response: ≤ 5ms to 90%• Position Effect: ±0.01% FSO for a 90° change in orientation• Calibration Orientation: Horizontal unless specified• Cycle Life: 1 million pressure cycles• Fluid Fill: 200 CS. Dow Corning 200. (Silicon Oil)• Length: 6.2 *depens on options• Diameter: .875Identification:• Etched onto housingConnections:• Pressure: PVC bullet nose• Electrical Cable Molded polyurethane jacket, 6 conductor with
breather tube, 24 AWG, 8’ long.
313L
A5SL-313L.00
WETTED PARTS:- 316 SS Housing- Neoprene Grommet- Polyurethane Jacketed Cable- PVC Bullet Nose
Some options will affect dimensions. Consult factory if important.
WASTE WATER106106
Typical configurations (consult factory for more options)
ACCURACY:ACCURACY:• ±0.25% Option C• ±0.10% Option D
REDGREENBLACKSHIELD
WIRING:
+EXC./SIGNALGROUND-EXC./SIGNALSHIELD
Accuracy:• Option C: ±0.25% FSO RSS• Option D: ±0.1% FSO RSSLong Term Stability: ≤ +0.5% FSO / yearPressure Ranges:• 0-10 In. WC thru 50 In. WC, 0-1 PSIG thru 300 PSIGDiameter Housing Options:• Option NI-1 - 1.0 DiameterTemperature Limits:• Compensated: +30º F to +85º F• Operating: -10º F to +175º FTemperature Compensation:• Zero & Span (Standard): Less than ±2.0% FSO/100°F at FSPR & or URLElectricals:• Excitation Voltage (Vdc): 10-35• Output at 70º F (FSO): 4-20 mA ±2%• Zero Balance: 4mA ±2% FSO at 70º F• Span: 16mA ±2% FSO at 70º F• Load Impedance: 1400 ohm maximum at 40 Vdc excitation• Circuit Protection: Short Circuit - Indefinite, Reversed Wired - Indefinite• Resolution: InfiniteMechanicals:• Proof Pressure: 2X FSPR (or URL)• Burst Pressure: Full scale ranges up to 20 PSI = 10X, above 20 to 150
PSI = 4X, above 150 PSI = 2X• External Pressure: 500 psi maximum• Cycle Life: 1 million pressure cycles• Length: 6.75 In. (adding options will vary the length)• Weight: NI-1 = 7.6 oz. (excluding cable)Identification: Etched onto housingConnections:• Process Connection: PVC bullet nose• Electrical Connection: Polyurethane or Tefzel Reinforced Cable with integral
vent tube (8 Ft. standard - other lengths available upon request)Wetted Material:• Titanium/Ceramic and Viton (excludes cable)
313L-NI
POLYURETHANE VENTED CABLEWITH KEVLAR - LENGTH TO ORDER
TITANIUM HOUSING
BREATHER TUBE
PRESSUREPREFERENCEHOLES
PVC NOSECONE
.875 REF.
6.8 REF.
Some options will affect dimensions. Consult factory if important.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
A5SL-313L-NI.00 Rev A
WASTE WATER108108
Typical configurations (consult factory for more options)
APPLICATIONS:APPLICATIONS:• Industrial OEM• Level & Depth• Water & Waste Water Treatment• Irrigation• Groundwater Testing• Food & Beverage
FEATURES:FEATURES:• Low Cost, High Accuracy, High Reliability• 0.5% FSO standard accuracy, 0.25% typical• Small size - 1” diameter, lightweight• Rugged, all welded construction• 1/2” NPT conduit thread standard• IP68 Rated• Operating Temperature -40°F to +180°F
PRESSURE RANGES:PRESSURE RANGES:• From 0-15 to 0-500 PSIG
REDGREENBLACKSHIELD
WIRING:
+EXC.+SIGNAL-EXC.OPEN
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:(Includes Hysteresis, Non-Linearity, Non-Repeatability)• 0.5% (BFSL)Resolution:• Infinite (Practical = 0.06% FSO)Pressure Cavity Material:• 316 SST and InconelTemperature Limits:• Compensated: 0º F to 180º F• Operating: -40º F to 180º F• Storage: -40º F to 250º FTemperature Compensation:• Zero & Span: ±2.0% FSO/100°FElectricals:• Excitation Voltage:(Model 1102) 9.0 - 36 Vdc(Model 1103) 9.0 - 36 Vdc
• Output at 70º F: 0.5 Vdc ±2%. FSO• Zero Balance: ±2.0% FSO• Span Tolerance: ±2.0% FSO• Insulation: 10 M Ohms at 50 Vdc Pin to CaseMechanicals:• Response Time: 5 ms• Proof Pressure: 1.5 X Full Scale Output• Burst Pressure: 3 X Full Scale OutputConnections:• Pressure: PVC bullet nose• Electrical Cable: 8’ Molded polyurethane jacket,6 conductor with breather tube.
1102
A5SL-1100.00 Rev A
WETTED PARTS:- 316 SS Housing- Neoprene Grommet- Polyurethane Jacketed Cable- PVC Bullet Nose
+EXC./SIGNALNC-EXC./SIGNALOPEN
1103
Some options will affect dimensions. Consult factory if important.
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
A5SL-11.00 Rev E
Standard Connections:• Process Connection: 1/4” NPT (F)• Electrical Connection: 36” long Belden 8723, 24 AWG, 4 conductorcable (or equivalent)
Electricals:• Input Impedance: (Model 111) 350 ohm nominal, full bridge• Input Current: (Model 211) 8mA nominal• Load Impedance:(Model 111) 50,000 ohms min. for less than 0.1% FSO attenuation.(Model 311) 1350 ohms max. at 36 Vdc & 750 ohms max. at 24 Vdc.
• Output Current:(Model 211) 2.0 mA max. for less than 0.1% FSO attenuation Turndown.(Model 311) Option GR-5:1 (3:1 for ranges ≤ 15 PSI)
Mechanicals:• Proof Pressure: 2 X FSPR (or URL) or 22,500 psi, whichever is less.• Burst pressure: Gauge/SG/Absolute - 5 X FSPR (or URL) or 23,000
psi, whichever is less.• Vacuum: 5 X FSPR in gauge• Pressure Response: Less than 5 ms 10% to 90%• Weight: 10 oz. nominal, options may increase weight• Wetted Material: 316 & 17-4 PH SST• Enclosure Material: 316 SST• Mounting: Pressure port
Unless otherwise stated, these specifications are the standards to which the units arenormally constructed. Upgrades or alterations may be easily and readily accomplishedby the standard option code or by discussion with the factory. We invite your inquiry.
Output at 70° F:• Model 111: 3 mV/V - 3.5-15 Vdc excitation• Model 211: 0-5 Vdc - 9.0-40 Vdc excitation• Model 311: 4-20 mA - 9.0-36 Vdc excitation
Accuracy:Static error band includes Hysteresis, Non-Linearity, Non-Repeatability• Option B: ±0.5% BFSL• Option C: ±0.2% BFSL• Option D: ±0.1% BFSLResolution: Infinite (Practical minimum of 0.02% on 111, 211 & 0.06% on 311)
Zero Balance and FSO:• ±2% FSO at 70° F for each
Range Calibration:• Model 111: Resistance value provided on calibration card for 100% FSO
Insulation Resistance:• >10 megohms at 50 Vdc & at 70° F
Temperature Limits:• Compensated: -0 to 180°F• Operating: -20°F to 190°F• Storage: -65°F to +250°F• Effect on Zero & Span: < ±2.0% FSO/100°F at FSPR and/or URL
SZ OtherModel 311 w/option GR onlyTG 0-5 through 0-15TJ 0-6 through 0-30TL 0-20 through 0-100TN 0-60 through 0-300TP 0-200 through 0-1000TR 0-600 through 0-3000TT 0-1000 through 0-5000
PRESSURE TYPE2 Gauge (Direct, 0-299 psi and
lower)3 Absolute4 Vacuum6 Sealed Gauge (hermetic)
(0-100 psig & higher)7 Gauge (non-hermetic seal)
(0-300 psi & higher)8 Elevated (suppressed zero)9 Other
neoprene grommetGA Standardized output to ±0.5% FSOGB Alternate full scale outputs. Set to ±2%FSOGC Special calibration of a standard range, i.e. 5-10 pointGD Pressure overload 10X rated range, or 22,5000 psi
whichever is less. Not available with GM, CW, GY, GF, GP,HX, JP, GR. Burst pressure 15x rated range or 23,000 psi,whichever is less.
GE Improved temp comp to ±0.5% FSO/100º F for zero & spanGF Expanded process temperature range, -65 to 250ºF
(±2% FSO/100ºF)GG Alternate calibration signalGH Internal cal resistor, set to 100% ±0.5% FSO unless
GR Ranging, (Model 311 only, see pressure code, includesoption GJ, n/a w/option GD. Limited to B series Acc)
GS 0-10 Vdc FSO, Model 211GY 316SS pressure cavity, (Option GD not available)HE ±0.5% FSO zero balance (Std. w/”D” accuracy), ranges ≥ 30
psi onlyHK NEMA 4X rating (Sealed gauge)HL RFI protectionHR ±15 Vdc excitation, Model 211JE 5000 ohm strain gauges, Model 111JH Remote cable mounted Z&S controls. 3’ cable on open side
cable on closed side as required. Model 311 onlyJJ Fast response (500 microsecond, Model 211)JK Barometric pressure, 23-35” HgaJS Internal damping as specified by customerJV Voltage surge protection (lighting resistance) Model 311MA 1-5 Vdc FSOCW Submersible housing, 8’ polyurethane non-vented cable,
FEATURES:FEATURES:• High accuracy (see specifications onreverse side)
• 3,625 PSI static line & single sidedoverpressure protection
• 4-20 mA output, available with or withoutHART® communication
• 30:1 turn down• Push button adjust with LCD display• Exotic wetted parts available
PRESSURE RANGES:PRESSURE RANGES:• From 0-0.5” WC through 0-3000 psid
APPLICATIONS:APPLICATIONS:• Chemical processing• Sanitay tank level• Tank level• Water Treatment plants
A5SL-GPIDP.00
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Positive values indicate HI side of sensor at the high pressure, and negative values indicate LO side of sensor at the high pressure.The upper span and range limits may be reduced by some options, consult factory.Suppressed or elevated zero ranges are acceptable as long as span and range limits are not exceeded.
Signal/Accuracy: (Includes Linearity, Hysteresis and Repeatability)
Code Electronic Signal Configured Signal Common Span AccuracyA 4-20mA 4 to 20 mA Linear Sq. Root ±0.20%
T 4-20mA w/HART® Digital Linear ±0.050%Digital Sq. Root ±0.080%
4 to 20 mA Linear ±0.075%4 to 20 mA Sq. Root ±0.105%
Ranging may affect accuracy, consult factory for exact specifications.
Static Line Shift: (Zero and span shift for a 1000 PSI change in static pressure)
Zero shift can be calibrated out by zeroing at nominal line pressure.* Zero and span shift for a 500 PSI change in state pressure for Span Codes A & D.
Temperature Compensation: -20° F to +180° FProcess Temperature Range: -50° F to +250° F (silicone fill fluid)Ambient Temperature Range: -40° F to +185° F*Span Code A specification applies to a transmitter with a stainless steel sensor only.
LCD Indicator:Operative limits of the standard indicator are -20° F and +185° F (-29° C and +85° C), normal operating limits are -4°F & +185°F(-20° C & +82° C). The LCD indicator will not be damaged at any temperature within the “Storage and Transportation Limits”,updates will be slower and readability decreased at temperatures outside “Normal Operating Conditions”.
Environmental Protection:With topworks cover on and conduit entrances sealed, transmitter is dust tight per IEC IP66 and provides environmental protectionof NEMA type 4X.
FEATURES:FEATURES:• Flush Diaphragm• All-welded type 316 & 15-5 ph SST• Rugged, all encapsulated electronics• Minimal zero installation effect
PRESSURE RANGES:PRESSURE RANGES:• From 0-50 to 0-10,000 psi
ACCURACY:ACCURACY:• From 0.2% FSO to 1.0% FSO(See specifications)
Approvals
Accuracy:Static error band (Includes Hysteresis, Non-Linearity, Non-Repeatability)• Series A: ±1.0% FSO (RSS)• Series B: ±0.5% FSO (RSS)• Series C: ±0.2% FSO (RSS)Temperature Compensation:• Effect on Zero / Span: Less than ±2.0% FSO/100°F for eachElectricals:• Excitation Voltage:
• Output Current:(Model 317) 2.0 mA max. for less than 0.1% FSO attenuation
• Input Impedance:(Model 117) 350 ohms nominal
• Load Impedance:(Model 117) 50,000 ohms min. for less than 0.1% FSO attenuation(Model 317) 1350 ohms max. at 36 Vdc and 750 ohms max. Vdc
• Zero Balance:(Model 117) 0.0 mV/V ±2% FSO at 70° F(Model 217) 0.0 Vdc ±2% FSO(Model 317) 4.0 mA ±2% FSO at 70° F
• Insulation Resistance: Greater than 10 megohms at 50 Vdc & 70° F• Resolution: Infinite
Temperature Limits:• Compensated: 0º F to +180º F• Operating (Tip Temperature): -20º to +250º F
Mechanicals:• Proof Pressure: 1.5 X full scale pressure range or 12 kpsi, whichever is less• Burst Pressure: 5 X full scale pressure range or 15 kpsi, whichever is less• Case Materials: Type 316 Stainless Steel• Weight: 8 oz. nominal• Identification: Etched SST nameplate welded to body
Connections:• Pressure: 3/4” - 16 UNF-3A thread with Teflon O-ring with retaining rim
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
FLUSH DIAPHRAGM116116
O-RING GROOVEOPTION HC 3/4-16 UNF-3A
THREAD
1.125 HEX
1.50 DIA.
0.652
3.5
0.45
0.56
1.5 DIA.
36” PIGTAIL
COVER SCREWS FORZERO/SPAN ADJUSTOPTION GJ
Some options will affect dimensions. Consult factory if important.
ALTERNATE CONNECTOR OR CABLECA PTIH-10-6P (Mate PT06E-10-6S [SR], not included)CF 1/2” NPT (M) thread with 36” potted leadsCH Vented cable 8’ long (NEMA 4 termination)CJ DIN 43650 connector (includes mate)CL 1/2” NPT (M) thread with 24” vented cable (for ranges less than 299 psi).CT Teflon jacketed cable, Tefzel used on submersible units (options CH, CL, CW, DE, GM)
PROCESS CONNECTIONAA 3/4” - 16 UNF-3A M Port, Teflon O-Ring Face Seal & Retaining RingFN 1/2” NPT (M)LH SAE-6 (M), 9/16”-18 UNF, ranges > 500 psi onlyFZ Non-standard pressure port
grommet,1/2” NPT (M) conduit.DE IP-67 (NEMA-6) vented polyurethane jacket cable, neoprene grommet.GA Standardized output to ±0.5% FSOGB Alternate pressure range, pressure units, or full scale outputs that are non-standardGE Improved temp. compensation to ±0.5% FSO/ 100ºF for zero and span respectivelyGG Alternate shunt calibration signalGH Internal shunt calibration resistor set to 100 ±0.5% FSO unless otherwise specifiedGJ Zero & span adjustment (~ ±20% FSO) Not on Model 117GK Inconel thread and diaphragmGP Hastelloy thread and diaphragmHC Integral O-ring groove, includes Teflon O-ring, (Eliminates need for O-ring retaining ring)HL RFI protection (For unit in proximity to radio transmitter)HX Hastelloy diaphragm onlyJG Viton O-ringGX Mineral oil fillGZ Customer special
MODEL 17 ACCESSORIESPN# Material Seal Type Pressure Port
Weld Nipple WN17 AA(316 SS) AA (Retaining Ring) AA (3/4” - 16 UNF-3B)Weld Plug WP17 AA(316 SS) AA (Retaining Ring) AA (3/4” - 16 UNF-3A)O-Ring with OR17 AA(Teflon) AA (Retaining Ring)Retaining Ring
Temperature Limits:• Compensated: 30º F to +170º F• Operating: 0º to +185º F
Temperature Compensation:• Effect on Zero/Span: Within ±2% FSO/100°F for each
Orientation Shift:• Zero: ±1 in WC, Option GJ or JH is recommended on ranges≤ 200 in WC
Span:• (Model 218): 5 Vdc ±2% FSO at 70° F• (Model 318): 16 mA ±2% FSO at 70° F
Enclosure:• All-welded type 316 SST. Rated NEMA-4x. (3A 74-03 compliant)
Electricals:• Excitation Voltage:
(Model 218) 10.5-32 Vdc(Model 318) 13-37 Vdc
• Output at 70° F:(Model 218) 5.0 Vdc ±2% FSO(Model 318) 4-20 mA ±2% FSO
• Zero Balance:(Model 218) 0.0 mV/V ±5% FSO at 70° F Horizontal position(Model 318) 4.0 mA ±5% FSO at 70° F Horizontal position
• Load Impedance:(Model 318) 1200 ohms max. at 37 Vdc
• Output Loading:(Model 218) 3,000 ohms min.
Mechanicals:• Proof Pressure: 3 X full scale pressure• Burst Pressure: 5 X full scale pressure• Case Materials: Type 316 Stainless Steel• Weight: 12 oz. nominal (not including Weld Nipple)• Identification: Etched on transducer
Connections:• Pressure: 1-3/4” - 20 UNF thread to 316 SST Weld Nipple(Weld Nipple not included)
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
74-03Cert no. 668
FLUSH DIAPHRAGM118118
1-3/4” - 20 316 SS 2.1” ODM44 - 1.25 316 SS 2.1” OD1-3/4” - 20 316 SS 2.5” ODM44 - 1.25 316 SS 2.5” OD
Aluminum 1/3/4” - 20 X 1/4” NPTFAluminum M44 - 1.25 X 1/4” NPTF
CTF18-AL-AACTF18-AL-FQ
Teflon gasket - Model 18GS18
OPTIONSAA NoneALTERNATE CONNECTOR OR CABLECA Bendix PTIH-10-6P (Mate: PT06E-10-6S[SR] not included)CF 1/2” NPT (M) thread with 8” potted leads (Non-Vented)CH NEMA-4X cable, 8’ vented polyurethane jacket cable
(only available on ranges up to and including 299 PSI)CJ DIN 43650 (Hirshmann) w/MateCL 1/2” NPT (M) conduit, 2’ vented polyurethane jacket cable (Ranges 0-299 PSI)CT Teflon jacketed cable, Tefzel used on submersible units (Options CH, CL, CW, DE, GM)CZ Alternate Connector/Cable/OtherALTERNATE PRESSURE PORTFQ M44 X 1.25 Metric threadFZ Non-standard pressure portGENERALDE IP-67 (NEMA-6) vented polyurethane jacket cable, neoprene grommet.CW Submersible housing, 8’ non-vented polyurethane jacket cable, neoprene grommet,
1/2” NPT (M) conduit.GA Standard Full Scale Output, (FSO = (Full Scale Reading) - (Zero Reading) ±0.5% FSO)GB Alternate Electronic Output (Specify Zero & Span output values)GE Improved Temperature Compensation to ±0.5% FSO/100°F for Zero & Span
Respectively, (from 30°F to 180°F)GF Expanded process temperature range, -65 to 250°F (± 2% FSO/100°F)GJ Add Zero & Span Controls. (Approx. ±20% FSO adjustment)GK Inconel Diaphragm and Diaphragm HousingGM Submersible housing w/8’ Standard CableGP Hastelloy Diaphragm and Diaphragm HousingGS 0-10 Vdc FSO, Model 218. (Requires 16-32 Vdc excitation)HL RFI Protection (for unit proximity to radio transmitter)JH Remote Cable-Mounted Zero and Span Controls (Model 318 only)GZ Customer special
POROUS BREATHER(VAPOR BLOCK)
VENT TUBE
3.42 REF.(4.07 REF. WITH OPTION HL, RFI)
Reference drawing only, dimensions are nominal and for reference purpose only.
2770
Long
Roa
dG
rand
Isla
ndN
Y14
072,
US
A(7
16)7
73-9
300
74-0
3
MO
DE
L#
318-
xxxx
xxP
RE
SS
UR
ER
AN
GE
xxxx
xS
ER
IAL
#xx
xxx
MA
X.P
RO
OF
PR
ES
SU
RE
xxxx
MA
X.T
EM
PE
RA
TUR
Exx
xx
6 CONDUCTOR POLYURETHANECABLE WITH VENT TUBE 20’ STD.
MODEL 18
Ø1.50
LOCKING RING1 3/4 - 20 THD. STD.
M44 x 1.25 THD OPTION FQLEAK DETECTION PORTORIENTATE WITH PORT
PRESSURE RANGES:PRESSURE RANGES:• From 0-100 psisg to 0-20,000 psisg
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
Accuracy:Static Error (Includes Hysteresis, Non-Linearity, Non-Repeatability)• ±0.5% FSO RSSResolution:• Infinite (Practical min. of 0.02% on 181, 281 and 0.06% on 381)Temperature Limits:• Compensated: 0º F to +180º F• Operating: -20º F to +200º FTemperature Compensation:• Zero & Span: Less than ±2.0% FSO/100°F for eachElectricals:• Excitation Voltage:(Model 181) 3.5 -15 Vdc(Model 281) 9-40 Vdc(Model 381) 9-36 Vdc
• Zero Balance:(Model 181) 0.0 mV/V ±5% FSO at 70° F at 10 Vdc(Model 281) 0.0 Vdc ±5% FSO at 70° F at 24 Vdc(Model 381) 4.0 mA ±5% FSO at 70° F at 24 Vdc
• Input Impedance:(Model 181) 5,000 ohm, nominal
• Load Impedance:(Model 181) 50,000 ohm, min. for less than 0.1% FSO attenuation(Model 381) 1,350 ohms, max. at 36 Vdc & 750 ohms max. at 24 Vdc
• Range Cal. Signal:(Model 181) Resistance value provided on calibration card for 100% FSO(Models 281 & 381) NC. see option GH
• Insulation Resistance: Greater than 10 megaohms at 50 Vdc and 70° FMechanicals:• Proof Pressure: 2 X full scale pressure or 22,500 psi, whichever is less• Burst Pressure: 5 X full scale pressure or 23,000 psi, whichever is less• Weight: 6 oz. nominal• Fatigue Life: Infinite when operated at less than max. pressure rangeConnections:• Pressure: Flush Diaphragm with gasket (included)• Electrical Cable: 20’ non-vented polyurethane jacketed, 6 conductorWetted Parts: Inconel X750Enclosure: All-welded type 316 SST. Rated NEMA-4X. 3A 74-03 compliantIdentification: Laser etching & etched SST nameplate welded to bodyResistance to shock: According to IEC 68-2-32: 1m(free-fall onto steel plate)Vibration Resistance: According to IEC 68-2-6 & 68-2-36: 20g
Some options will affect dimensions. Consult factory if important.
• Output at 70° F:(Models 280/283) 0-5 Vdc ±2% FSO(Models 380/383) 4-20 mA ±2% FSO
• Input Current:(Models 280/283) 6.2 mA nominal
• Output Current:(Models 280/283) 2.0 mA max. for less than 0.1% FSO attenuation
• Load Impedance:(Models 380/383) 1200 ohms max. at 37 Vdc & 550 ohms max. at 24 Vdc
• Zero Balance:(Models 280/283) 0.0 Vdc ±5% FSO at 70° F(Model 380/383) 4.0 mA ±5% FSO at 70°F
• Resolution: Infinite 0.2% practical
Temperature Compensation:• Effect on Zero / Span: Less than ±2.0% FSO/100°F for each
Temperature Limits:Ambient Temperature• Compensated: (Models 80/83) 0º F to 180º F• Operating: (Models 80/83) -20º F to 200º F
Process Temperature• Compensated:(Model 80) 0º F to 180º F(Model 83) 0º F to 400º F
• Operating:(Model 80) -20º F to 200º F(Model 83) -20º F to 400º F
Mechanicals:• Proof Pressure: 3 X full scale pressure• Burst Pressure: 6 X full scale pressure• Enclosure: All-welded type 316 SST. Rated NEMA-4x (3A 74-03 compliant)• Weight: 14 oz. nominal, dependent on pressure fitting• Identification: Etched into body
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
GENERALGA Standardized output to ±0.5% FSOGB Alternate full scale outputsGE Improved temperature compensation to ±0.5% FSO/100ºF for zero & span respectively.GF Expanded process temperature range, -65 to 250° F (±2% FSO/100° F)GJ Zero & span controls. Can-mountedGP Hastelloy diaphragm & Tri-Clamp fitting (wetted port)GS 0-10 Vdc FSO, Models 280/283 onlyGZ Customer specialHE Improved zero balance ±0.5% FSOHX Hastelloy diaphragmJH Remote cable-mounted Zero & Span controls. 3’ cable on open side.
Cable on closed side as required. (380/383 only)JV Voltage surge protection. (380/383 only)MD Explosion-proof/explosion-resistant zero and span controls.MH 3:1 ranging for upper ranges ≤ 0-15 psi and 0-20” WC through 0-100” WC only.
FEATURES:FEATURES:• 3 1/2 digits with one relay• Available as part of GP:50’s Quick Ship program
INPUT:INPUT:• 4-20 mA
SUPPLY:SUPPLY:• 4-20 mA transmitter
INTERFACE:INTERFACE:• DIN 43650 interface (GP:50 connector option ‘CJ’)
APPLICATION:APPLICATION:
Seen here with GP:50’sModel 311 pressure transmitter
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
The LD1001 plug-on display is a universal local display with anadjustable set point, suitable for use with any GP:50 4-20 mA2 wire transmitter. Removing the front cover of the display willreveal 2 programming buttons. These are used to input thedesired settings for the following parameters: zero, scale, dec-imal point position, damping & switching point.
LD1001 is factory set up when ordered with a transmitter foreasy field installation.
124124
PRESSURE GAUGES FOR THE PROCESS, GENERAL PURPOSE, TEST,SANITARY & INDUSTRIAL MARKETPLACE.
• Ruggedized versions for high shock & vibration applications• Ranges from 0-10” WC thru 0-20,000 PSI• Vacuum and differential formats• Sizes from 1” thru 10” diameter• ±0.1% accuracy versions
GP:50 Provides Blue Ribbon Pressure Gauges
Contact GP:50 with your gauge applicationToll Free: (877) 774-4751 Tel: (716) 773-9300 Fax: (716) 773-5019
MODEL 1211FEATURES:FEATURES:• 4 Digit LED Display• Thermocouple, RTD, mV, mA, V, and Resistance Inputs• Alarm Relay(s)• Zero/Tare and Max/Min Memory
ORDERING GUIDE:ORDERING GUIDE:Use the following codes to identify desired item.
Example: 1211-AB-B-1-R
Model:1211Output
A 1 Alarm RelayB 2 Alarm RelaysC 3 Alarm RelaysD 1 Alarm Relay, 1 Analog Output (4-20mA)E 2 Alarm Relays, 1 Analog Output (4-20mA)F 3 Alarm Relays, 1 Analog Output (4-20mA)
ButtonsN Blank FasciaB Front Panel Push Buttons
Power1 90-250V AC Input2 10-32V AC or DC Low Voltage Input
DisplayR Red DisplayG Green Display
MODEL OUTPUT BUTTONS POWER DISPLAY
MODEL 1254FEATURES:FEATURES:• 5 Digit LED Display• “Fast-Cal” Calibration• Transducer Excitation Supply• Isolated Analog Input• Transducer Health “Test” Function• Dual Alarm Relays• Serial Communications
ORDERING GUIDE:ORDERING GUIDE:Use the following codes to identify desired item.
Example:1254-1-R
Model:1254 (2 Alarm Relays)
Power1 90-250V AC Input
DisplayR Red DisplayG Green Display
FAST CAL OPERATION:FAST CAL OPERATION:Automatically calibrates & matches the indicator toa pressure transducer. It records the output at zeropressure & then records the Span by activating thetransducers internal calibration resistor. TransducerTest - Allows a fast & accurate method of checkingthe wiring, calibration, and health of the connectedtransducer.Additional - Display Hold, Alarm Acknowledge, Keyboard Lock.
MODEL POWER DISPLAY
DIGITAL INDICATORModel 1211, 1254Model 1211, 1254
GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochurewithout prior notification. Please contact the factory on all critical dimensions and specifications for verification.
INDICATORS/ PRESSURE GAUGES / ACCESSORIES126126
MODEL 1211Display
Type 14.2mm high brightnessred LED (green optional)
Range 4 digit (-1999 tp 9999)Update Rate 2 per second
Thermocouple InputsType J, K, T, N, S, RCJC Accuracy 1°C after 30 minutesOpen Circuit Detection UpscaleEngineering Units °C or °FResolution 1 or 0.1°C (°F)
RTDType Pt100 (alpha = 385)
Pt100 (alpha = 392)Configuration 3 wireExcitation Units °C or °FResolution 1 or 0.1 °C (°F)
Voltage & Current InputsRanges ±20mA, ±100mV, ±10VDCScaling Any portion of the display rangeAccuracy 0.05% at 25°C typical
Impedance < 5 Ohms (mA),> 100 M Ohms (mV)> 100 M Ohms (V)
Analog Output (Option)Output 4 to 20mAMaximum Output 22mAAccuracy 0.2% at 25° C typicalMaximum Load 500 OhmsResolution 0.02mA
Alarm Relays (Relays 2 & 3 are optional)Relays 1 & 2 Change over contactsRelays 3 Normally open contactsRating 1 Amp at 250 VAC,
5 Amp at 30 VDCPhysical / Mechanical
Front Panel Protection to IP65Dimensions (mm) 48(H) x 96(W) X 100(D)Weight 0.4Kg
EnvironmentalTemperature 10 to 50°C operating,
-10 to 70°C storageHumidity 0-95% RH non condensing
MODEL 1254Display
Type 14.2mm high brightnessred LED (green optional)
Range 5 digit (-19999 tp 99999)Update Rate 2 per secondResolution User selectable
InputADC Type Dual slope integrating auto zero, 17 bit
(universal for mV, mA, V)Resolution Up to 1 microV per display digit (mV input)Accuracy 0.05% of readingMeasurement Rate 10 per secondInput Impedance >100M Ohms (mV inputs)Common Mode Rejection >150dBSeries Mode Rejection >70dB
Transducer SupplyExcitation User selectable regulated 0-12VDC at
35mALoop power 24VDC, nominal (35mA max)
Alarm RelaysRelays 2 off, single change over contactsRating 1 Amp at 250VAC, 5 Amp at 30VDC
Analog OutputIsolation 500VDC / Peak ACOutput User selectable
0 to 10VDC, 0 to 20mA, or 4 to 20mAScaling User Scaling to any displayable valueAccuracy 0.2% at 25°C typicalResponse 100msResolution 0.05% (5mV or 0.01mA)Max. Voltage Output 11V at 22mAMax. Current Output 22mA at 18VMax. Load 900 Ohms
Serial CommunicationsType:RS 422/485, 2 or 4 wire multidropIsolation: 500Vdc/Peak acSpeed: 1200, 2400, 4800, 9600 baudParity: Odd, even or noneStop bits: 1 or 2Protocols: MODBUS™ RTU (J-BUS), MODBUS™, ASCII & DTPL
Physical / MechanicalDimensions (mm) 48(H) x 96(W) X 100(D)Weight 0.4Kg
EnvironmentalTemperature 10 to 50°C operating,
-10 to 70°C storageHumidity 0-95% RH non condensing
AlarmsDisplay Alarms can be flashed on the display with
the measured value.Menus 4 menus, each individually user
selectable.
DIGITAL INDICATORModel 1211, 1254Model 1211, 1254
NOTE:Specifications reflect standard product, improved performance / mechanicaloptions available.
Modifications may alter specs, consult factory for more information.
TECHNICAL/APPLICATION NOTES127127
A5SL-TN1.00
One method of determining level in a tank, pond, weir orwell is to utilize a pressure transmitter. There is a directrelationship between liquid level and “head” pressure.Depending on the installation requirements, pressuretransmitters are available in submersible, screw on, flangemount, flush mount and many other installation configura-tions.
Pressure & Level RelationshipThe pressure at the bottom of an open tank or body of liq-uid is related to the height of the liquid. This level pressureis called hydrostatic head pressure. Typical units of meas-ure for hydrostatic pressure are inches of water column orfeet of water column. (in WC / ft WC)
27.679 inches of water column is approximately equiva-lent to 1 PSI at 40º C. The volume of water will not affectthe hydrostatic head pressure, it is the height that affectsthe pressure. Whether 27.679 inches deep in the middle ofa large body of water or small bucket of water the headpressure is the same.
When measuring liquid level with a pressure transmitter,specific gravity must also be taken into account.P=SG • H (H = P/SG) shows the relationship betweenthe height of the liquid, specific gravity and hydrostaticpressure.
H – Height of the liquid being measuredP – Hydrostatic head pressure at the bottom of the tankSG – Media’s specific gravity. (A dimensionless number)
If the media’s specific gravity is unknown it can be calcu-lated from the density of the liquid being measured.SG = Density of media ÷ Density of water at 40° C.Density of water is 1.00 g/cm3. The density of gasolineequals 0.82 g/cm3. Therefore, the SG of gasoline is 0.82g/cm3 ÷ 1.00 g/cm3 = 0.82
Example:Calculating hydrostatic head of 240 inches of gasoline ina vessel is as follows:
Height (H) = 240” of GasolineSpecific Gravity (SG) = 0.82 P=SG • H thereforeP=0.82 x 240 inches = 196.8 in WC.
The hydrostatic pressure (P) at the bottom of this vessel isequivalent to 196.8 in of water column.
To convert this level measurement to pressure (PSI) thefollowing conversion is used:1 inch of water column = 0.03613 PSI (≈27.679 inches ofwater column = 1 PSI).196.8 in WC x 0.03613 = 7.110 PSI240 Inches of Gasoline = 7.110 PSI of hydrostatic pres-sure at the bottom of this container.
Specific gravity can have a significant effect on the levelmeasurement. If this same vessel were filled with water tothe same depth there would be a 22% increase in headpressure.
INSTALLATION TYPESOpen Tank / Pond / Weir Level MeasurementWhen utilizing a pressure transmitter for level measure-ment the installation must carefully be considered. In anopen tank or body of water where the liquid being meas-ured is open to atmospheric pressure, there are a varietyof installation options.
Open Tank
Model 311
Panel Meter
Tank Mounted Level SensorFig. 1
Figure 1: Shows a pipe mount style pressure transmit-ter. This style transmitter is typically plumbed to the baseor side of a vessel & the signal sent to a panel meter orother reading device. This can be utilized where a pipe tapor other mechanical process connection can easily be ac-cessed. A shut-off valve should be utilized for ease of re-moval.
LEVEL MEASUREMENT UTILIZING A PRESSURE TRANSMITTERTechnical Note #1Technical Note #1
TECHNICAL/APPLICATION NOTES128128
This type of transmitter can also be installed using aflanged or flush mount connection. Flush mount transmit-ters are typically found in sanitary applications or wherethe media being measured can plug a recessed processconnection.
Figure 2: Shows a submersible pressure or level trans-mitter. This style of transmitter is lowered into the well ortank via its integral cable. Installation is easier than thepipe mount style especially where a plumbed connectionis not readily available, like on a fiberglass tank, under-ground tank or in an open well or pond.
For both installations the transmitter should be of gaugeformat to eliminate any barometric effects.
Submersible transmitters typically come with an integralvent tube in the cable, which is terminated in the panelmeter or junction box topside. The pipe mount versiontransmitter is also available with a vented cable option soas to provide ingress protection when mounted outdoors.
Model 313L
Fig. 2Panel Meter
Well
Submersible Level Sensor
Figure 3: Shows a pipe-mounted transmitter with a zerosuppression option. Zero suppression allows for levelmeasurement of just the upper bowl and cancels out thetower pipe level / head pressure.
Fig. 3
Elevated Storage Tank
Panel Meter
Model 311
Fig 4: Pressurized Tank levelSometimes media is stored in a tank under a pressurized gasblanket. This gas blanket can vary from a fraction of a PSI tomany PSI. This pressurized gas blanket has an additive effecton the total media head pressure. The total head pressure is nowequivalent to the blanket gas pressure plus the hydrostatic headpressure.
If a standard pressure sensor is attached to the base of the tankas shown in Fig. 4 it would provide a signal equivalent to themedia’s head pressure and the pressure of the gas blanket com-bined.
For example, if the gas blanket was 1 PSI and the media had 10ft of head pressure, a bottom or side mounted gauge transmitterwould read 5.335 PSI or 12.31 FT WC since 1PSI = 2.306 FTWC +10FT WC = 5.335 PSI.
LEVEL MEASUREMENT UTILIZING A PRESSURE TRANSMITTERTechnical Note #1Technical Note #1
TECHNICAL/APPLICATION NOTES129129
Utilizing this style of pressure transmitter will work if theblanket pressure can be measured and subtracted fromthe readings of the transmitter. This can be difficult toaccomplish and total accuracy is affected.
The most common method of getting an accurate levelmeasurement in this application is to utilize a DifferentialPressure Transmitter (DP). Fig 4 shows a DP transmitterinstalled with the High side plumbed to the base of the tankand the Low side is plumbed to the air blanket on top.Typically SST, oil-filled capillary tubing is attached toremote diaphragm seals and coupled to each side of theDP transmitter, as shown in Fig 4. This provides a flangedor clamped style fitting for tank mounting purposes.
The High side then senses the media head pressure com-bined with the air blanket pressure. The low side sensesjust the air blanket pressure.
The low side air blanket reading then offsets the high sidecombined reading and provides an accurate level meas-urement.
Pressurized Tank
DP Transmitter
Liquid Media
Panel Meter
For example, assume this tank is 10 feet tall and has 9feet of water level inside and 1 PSI of an air blanket.
Knowing that water has a specific gravity of 1.00, thehydrostatic head pressure and gas pressure reading atthe base of the tank or on the high side of the DP wouldtotal: 9 FT WC + 1 PSI = (2.307 FT WC) = 11.307 FTWC TTL.
The low side of the DP is measuring the gas blanketpressure of 1 PSI which is then subtracted from theHigh side reading. 11.307 FT WC – 1 PSI = 9 FT WClevel.
9 FT WC is the corrected media level in this tank ex-ample. Changes in the gas pressure blanket or level areall corrected via the DP measurement.
There can be a number of variables to consider with thistype of installation.- What is the media and ambient temperature?- Are the capillaries exposed to the same temperature?- Mounting location of the DP transmitter- Will the system be exposed to vacuum?
Whatever your level or pressure application require-ments, GP:50 has a technical staff willing to assist youwith your needs.
Fig. 4
Please contact GP:50:2770 Long Road Grand Island, NY 14072Tel. (716) 773-9300 • Fax (716) [email protected] • www.gp50.com
LEVEL MEASUREMENT UTILIZING A PRESSURE TRANSMITTERTechnical Note #1Technical Note #1
TECHNICAL/APPLICATION NOTES130130
Pressure vessels, valves, tanks, heat exchangers, radiators, drums, welds, and gasket integrity are just a few products that require high seal integrity toinsure a reliable leak free product. There are a few ways to insure this integrity, pressure decay or leak testing is the most common. Helium or Ion leakdetection systems work very well but require expensive equipment and may exceed the requirements necessary.
Pressure decay utilizing a pressure transmitter is simple to use, cost effective and can be more efficient in a production environment, especially if higherpressures are required to test the integrity of the vessel.
Pressurizing the vessel or test piece and monitoring pressure output from the transmitter will indicate any subsequent loss of pressure due to a leak inthe vessel.
There are two methods,utilizing either a gauge or differential pressure transmitter to measure pressure decay.
Setup 1: (Single Ended - Gauge Pressure)Diagram 1 shows a container being tested utilizing a 150 PSI gaugetype transmitter. If the container is pressurized to 150 PSI and thenthe valve is closed, the transducer will sense a leak in pressure via adrop in output.
Small leaks may be detected with this setup but the process can betime consuming.
Percent error of the transmitter, and pressure range of the transmittergreatly affect the decay resolution.
If the gauge transmitters total error band is 1%FSO a 1.5 PSI (41.52”WC) error may be present. (150 PSI x 1% TTL Error band = 1.5 PSI).This may be too large of an error if small leak rates need to bedetected.
Setup 2: (Differential Pressure)Diagram 2 shows a container being tested utilizing a Differential PressureTransmitter.
In this example the container and system is pressurized to 150 PSI with allvalves open but now we utilize a 5 in WC Differential Pressure (DP) trans-mitter. Once the system is stabilized valve A is then closed. The DP trans-mitter will read Zero output because of a zero differential pressure.(150 PSI on both the Low & Hi sides)
Valve B is then closed. This isolates the 150 PSI in the vessel under testto the Low side of the DP. If a leak is present the Low side will sense thispressure decay as indicated by a drop in output from the DP transmitter.
Lets assume this 5” WC transmitter has a 1% FSO error spec like thegauge transmitter. The pressure drop or decay can then be accurately de-tected at 0.050” WC. (5” WC x 1% TTL Error Band = 0.05”WC)
Diagram 1Signal Out
GaugeTransmitter
Vessel Under Test
CompressedAir Source
Valve
Diagram 2Signal Out
Valve B
Vessel Under Test
CompressedAir Source
Valve A
DP Transmitter
Hi Side Lo Side
HI LO
As you can see from the first gauge pressure example, utilizing a differential pressure system produces more accurate and fasterresults. The decay measurement is more than 800 times better utilizing the DP transmitter.
A5SL-TN2.00
DETECTING LEAKSTechnical Note #2Technical Note #2
TECHNICAL/APPLICATION NOTES131131
When selecting a pressure transmitter, the pressure reference format is critical so as to provide an accurate device. Pressurereference may be gauge, sealed gauge, vacuum, absolute or differential. Gauge and sealed gauge format are the most commonlysupplied and what we address below.
A pressure sensor has both a reference and process side. The process side is where the media being measured is applied,typically a pipe, flanged or other threaded connection. The reference side or back side is not visible from the outside and isenclosed inside the transmitters housing. There are many parameters to consider when selecting gauge or sealed gaugeformat. Below we define and provide guidelines in selecting these formats.
This vent hole insures both sides of the sensor areexposed to the local altitude and barometric pressure.This gauge reference hole equalizes these pressures andprovides a stable zero reading regardless of barometricpressure or altitude. Therefore true gauge formatprovides a pressure measurement relative to localaltitude and atmospheric conditions.
Gauge reference is very critical in ranges <300 PSI. It canaffect ranges above or equal to 300 PSI but depending onaccuracy required may or may not be a consideration.This is explained below under the Sealed gauge defini-tion.
GAUGE REF HOLE
PROCESS PORT
Fig. 1
Gauge Pressure (PSIG)Gauge pressure transducers provide a vent path to the reference or backside of the sensor. As shown in Fig 1, gauge format istypically provided for by adding a vent hole in the housing of the device. This provides an atmospheric reference to the referenceof the sensor.
Sealed Gauge (PSIS or PSISG)Sealed gauge transducers on the other hand, do not provide a vent hole to the sensors reference side. This reference orbackside of the sensor is sealed from atmosphere at the factory.
GP:50 offers two sealed gauge formats designated as hermetic and non-hermetic, option codes 6 & 7 respectfully. A hermeti-cally sealed gauge (6) device has the reference side of the sensor evacuated and sealed via a special header. This hermeticheader helps reduces the effects of temperature due to internal air expansion trapped in the housing assembly. The unit isthen zeroed to 1 atmosphere or approximately 14.7 PSIA.
The non-hermetic version (7) does not provide a hermetic header. The sensors reference side is sealed inside the housing atlocal atmospheric pressure. This non-hermetic version typically isn’t a factor in higher ranges, typically 1,000 PSI or higher, orwhere ambient temperature changes can be minimized.
A5SL-TN3.00
TO BREATHE OR NOT TO BREATHE...GAUGE OR SEALED PRESSURE REFERENCE FORMAT
Technical Note #3Technical Note #3
TECHNICAL/APPLICATION NOTES132132
Sealed gauge readings can be drastically affected by barometric pressure andaltitude changes depending on the sensor range. Chart A shows the relation-ship between altitude and absolute pressure. The altitude at which the trans-mitter is installed can greatly affect the zero reading.
For example, sealed gauge units are calibrated at the factory at 591 ft aboveSea level or ~29.40 in. Hg. Calgary, Canada is at 3,533FT or ~26.30 in. Hg, a3.1 in. Hg difference or 1.52 PSI. This translates to a -0.51% difference on a300 PSI sensor or a zero reading drop as much as -0.081 mA. On a 100 PSIsensor this is a -1.52% change which could potentially produce a zero readingof 3.856 mA or lower depending on the initial zero setting called Zero balance.
On this same 100 PSI transmitter, if the standard zero balance spec is +/-1%FSO, the zero could potentially be as low as 3.84mA (16mA span +/-1% =+/-0.16mA) compounded with the additional -1.52 PSI altitude change, a 2.52PSI or -2.5% lower zero could result. Barometric effects can lower the zero evenfurther.
Barometric pressure also affects the zero reading. Barometric pressure couldpotentially swing as much as 1 PSI, (typical high -30.6 in. Hg to typical low -28.5in. Hg) depending on weather conditions. For example a 1.02 in. Hg drop inbarometric pressure would result in a 0.48% zero offset error on a 100 - PSIsensor.
As mentioned above, gauge pressure format negates effects from changes in local atmospheric pressure andaltitude.
All these effects need to be considered when selecting what format you require. Finally, consider the ambient con-ditions where the transmitter is being installed. Wet, oily, dirty, harsh environments may require a sealed gaugeformat to reduce the chances of contamination. To provide gauge format in these harsh environments an optionalvented cable is offered to remotely vent the reference side away from the potential contaminated area.
Selecting the correct pressure format, either gauge or sealed gauge will provide you the best, most accuratepressure solution for your application.
TO BREATHE OR NOT TO BREATHE...GAUGE OR SEALED PRESSURE REFERENCE FORMAT
Technical Note #3Technical Note #3
TECHNICAL/APPLICATION NOTES133133
The purpose of a lift station is to raise or lift the sewage to a higher elevation where it can then flow downhill via gravityto the wastewater treatment plant. Raw sewage flows by gravity to the lift station into what is called a wet well. This wetwell acts as a holding tank for the raw sewage. When a set level in the wet well is reached, a pump will automaticallystart to pump down the well to a consistent level. If the first pump cannot maintain the set level a second pump will startand run until a low level set point is reached. Some pump stations have as many as 4 pumps to maintain level. Withmillions of lift or pump stations throughout the US a reliable, accurate level transmitter is required to avoid overflow.
The purpose of the level transmitter is to provide feedback to the pump allowing them to turn on and off when the levelreaches a set height. Floats, bubbler systems, radar and ultrasonic are all ways to indicate level. However thesemethods can have installation difficulties, maintenance issues, high costs or reliability issues due to the environment.
GP:50 has developed the Model 311-M351, a submersible, hydrostatic level transmitter that can withstand the envi-ronmental conditions and provide a reliable, accurate level control. The large diameter sensing element is designedto resist clogging which is critical due to the level of fats, oil and grease found in the wet well. This design provideslow maintenance, installation and initial purchase cost.
The Model 311-M351 provides a heavy duty baffle plate, some times known as a Birdcage design, to protect thesensing element from installation issues or debris found floating in the effluent. The transmitters construction pro-vides a weighted advantage to keep the transmitter in place at the bottom of the wet well. The all stainless steel bodyprovides a corrosion resistant design with an integral Polyurethane or Tefzel cable to resist compatibility issues. Thecable also provides an integral breather tube that allows for barometric reference.
A typical sewage lift station layout is shown here.
A5SL-AN1.00
PUMPING OR LIFT STATION LEVEL CONTROLApplication Note #1Application Note #1
TECHNICAL/APPLICATION NOTES134134
40 FT OF 24 AWG MULTI-CONDUCTORPOLYURETHANE CABLE WITH INTEGRALVENT TUBE, SHIELD & DRAIN WIRE
1/2 NPT (M)
Ø1.50
4.17 REF
SENSING DIAPHRAGM
8 STAND OFF BOLTS(2 REMOVED FOR CLARITY)
PROTECTIVE STANDOFF PLATE
Ø3.8 REF
7.12 REF
Units are in inches. Some options will affect dimensions.Consult factory if important.
POROUS BREATHER ATTACHEDTO ATMOSPHERIC VENT TUBE
GP:
50PR
ESSU
RE
TRA
NSD
UC
ERTE
L:(7
16)7
73-9
300
S/N
PAR
T#
Installation is simple due to the transmitters design. The transmitter is inserted in the wet well from the top and lowered to thebottom of the well. The reinforced cable doesn’t require additional support, but in severe applications or for ease of retrieving thecable if dropped into the wet well an external support cable is recommended.
Typically the transmitter is terminated in a control panel where the signal is feed into a pump controller. GP:50 also provides a 2 or4 channel pump controller that provides programmable pump rotation, level indication, alarms, seal leakage indication and otherfeatures required for pump station control.
Model 311-M351Features- Non-Clogging 3-1/2” Diameter sensor face- All 316 SSTconstruction to resist corrosion- ½” NPT Male electrical conduit connection for rigid installation support- Integral lightning protection- ~6lbs in weight to limit cavitation and movement
Critical Specification Overview:(see data sheet for full specs)Pressure Ranges: 0-30” WC thru 0-300 PSIAccuracy: +/-0.5% FSO (+/-.25% FSO availableOutput: 4-20mA (0-5 VDC available)Wetted Materials: 316 Stainless Steel, Polyurethane & Neoprene.Temperature compensated: 0-140° F
PUMPING OR LIFT STATION LEVEL CONTROLApplication Note #1Application Note #1
Please contact GP:50:2770 Long Road • Grand Island, NY 14072Tel. (716) 773-9300 • Fax (716) [email protected] • www.GP50.com
135135
A Flare Knockout Tank is typically a horizontal vessel for trapping hydrocarbon liquids in a gas flare system.Separating the liquids out of the gas stream prevents possible damage further down the process.
The fluid in knockout tanks is mostly water mixed with some hydrocarbon. In areas where above ground tanksare prone to freezing these knockout tanks are often buried underground below the frost line.
As these tanks fill with the hydrocarbon condensate a reliable level indication is required to indicate when the tankreaches a predetermined level.
The simplest way to access the water level in this tank is through a stilling well or access port that is installed in thetank and is accessible above ground. Because the tanks are installed underground this access port is the onlyviable means of installing a level device.
Many different level instruments have been used with varying success. Mechanical floats were used but thecoating tendencies of the hydrocarbon and water mix required regular maintenance. Guided wave radar is anotheroption, but requires long rigid probes making it difficult to install, ship and handle. Ultrasonic devices are yet anotheroption but require precise setup, are susceptible to errors in level due to foaming and can be costly.
A GP:50 Model 311-M351 which works on a hydrostatic level principal avoids these limitations. It simply is installedthrough the access port or stilling well, allowed to settle to the bottom and then interfaced to the existing SCADAsystem. The 3 inch sensing element eliminated the clogging issues found with other contact devices, is easy toinstall, and is impervious to foaming or other pitfalls found setting up radar level systems. The Model 311-M351successfully prevents tank overflow which maintained plant safety and reduced unnecessary pump out cost by notemptying the tank sooner than is required.
Features- Non-Clogging 3-1/2” Diameter sensor face- All 316 Stainless Steel construction to resist corrosion- ½” NPT Male electrical conduit connection for rigid installation support- Integral lightning protection- ~6lbs in weight to limit cavitation and movement
Critical Specification Overview:(see data sheet for full specs)Pressure Ranges: 0-30” WC thru 0-300 PSIAccuracy: +/-0.5% FSO (+/-.25% FSO available)Output: 4-20mA (0-5 VDC available)Wetted Materials: 316 Stainless Steel, Polyurethane & Neoprene.Temperature compensated: 0-140° F
40 FT OF 24 AWG MULTI-CONDUCTORPOLYURETHANE CABLE WITH INTEGRALVENT TUBE, SHIELD & DRAIN WIRE
1/2 NPT (M)
Ø1.50
4.17 REF
SENSING DIAPHRAGM
8 STAND OFF BOLTS(2 REMOVED FOR CLARITY)
PROTECTIVE STANDOFF PLATE
Ø3.8 REF
7.12 REF
Units are in inches. Some options will affect dimensions.Consult factory if important.