www.grohe.com WMKA00022 AS/NZS 3718 GROHE ROUGH-IN SET MODEL #45984001 Product Specifications Product Description: Rough-in set Required for installation with Allure Floor Mounted Bath Outlet 13218000 Without finishing Trim Set Installation Plate with 360° horizontal and 3° vertical adjustment Installation depth 53-157mm for Bath Mixers/Spouts, Depth compensation 104mm Installation depth 65-157mm for Shower Mixers, depth compensation 92mm Two ½" Female Connections (hot/cold supplies) Flushing Plug Acoustic Isolation Mat Gasket included Fixing material
5
Embed
MODEL #45984001ROUGH-IN SET MODEL #45984001 3a 3b 4b Installation instructions. Installation instructions Flush piping system prior and after installation of fitting thoroughly! This
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.grohe.comWMKA00022AS/NZS 3718
GROHEROUGH-IN SET MODEL #45984001
Product Specifications
Product Description:
Rough-in setRequired for installation with Allure Floor Mounted Bath Outlet 13218000
Without finishing Trim SetInstallation Plate with 360° horizontal and 3° vertical adjustment
Installation depth 53-157mm for Bath Mixers/Spouts, Depth compensation 104mm
Installation depth 65-157mm for Shower Mixers, depth compensation 92mm
Two ½" Female Connections (hot/cold supplies) Flushing Plug Acoustic Isolation Mat
Gasket includedFixing material
www.grohe.com
3
1 2
4a
GROHEROUGH-IN SET MODEL #45984001
3a 3b
4b
Installation instructions
Installation instructions
www.grohe.com
Flush piping system prior and after installation of fitting thorthoroughly!
This product must be installed in conformance with local codes e.g. AS/NZS 3500 series of standard!
Installation and connection, see Figs [1] to [6]. Refer to the dimensional drawing above. PLEASE NOTE – Face ofof noggins need to be positioned a minimum of43mm & a maximum of 73mm from where the finishedwall surface will end up.
5 6
Note: When installing concealed mixer body, please note it must be mounted onto timber or solid walls using appropriate reinforcement to ensure sufficient strength.
Open cold and hot water supply and check connections for leakage!
Care For directions on the care of this fitting, please refer to the accompanying care instructions.