Model 2000 Kit Contents • 2000 model Medium Duty Tester with fixed Gauge to 20kN* • 150mm Load Spreading Bridge with 100mm Hex Extension legs (3) • Turning handle with integrated 22mm operating nut • M16 Hex Setscrew • Bolt Tester Adaptor • M12 Ringbolt Adaptor Clevis • M12 Locking Adaptor • Calibration Certificate • Padded Carrying Case * All export kits are fitted with gauge and coupler system Technical Data LOAD GAUGE • 0-25kN (5,600 lbf) • Accurate to +/-2.5% FSD • Indication of pull-out load • Calibration in kN The kit is supplied in a foam filled carrying case with full operating instructions and a 1 year calibration certificate. • Protective rubber cover • Impact resistant glass. Protections against sudden load relief i.e. sudden failure of fixing/connection. Scaffold Tester Kit The Hydrajaws Model 2000 Scaffold Tester kit is a specific kit allowing Scaffolders to test all common scaffold anchors and fixings in general use today. Hydrajaws Limited are the recognised industry specialist in Scaffold tie testing. H There has been a greater awareness recently for the use of testers, particularly with local authorities and the HSE. They require that a specific testing programme will be carried out on site in accordance with industry guidelines such as TG4:17 by the contractor, which is then endorsed by recorded evidence. 50mm OF STROKE NEW TURNING HANDLE DESIGN INCORPORATING OPERATING NUT AND DETACHABLE HANDLES ALLOWING USE IN CONFINED SPACES. SOLID 100mm HEX LEGS WITH 25mm OF FINE ADJUSTMENT TO ACCOMMODATE ALL SCAFFOLD INDUSTRY FIXINGS. THE HYDRAJAWS BRAND - YOUR SIGN OF DEPENDABILITY AND CONFIDENCE FOR OVER 25 YEARS. EYEBOLT ATTACHMENT INCLUDED MADE IN THE UK Operating Instructions HYDRAJAWS 2000 Model Tester APPROVED LOAD SPREADING BRIDGE DESIGN www.hydrajaws.co.uk email: [email protected] Hydrajaws Ltd., 20/21 The Courtyard, Gorsey Lane, Coleshill, Birmingham B46 1JA Tel: +44 (0)1675 430 370 Fax: +44 (0)1675 465 950 MAKE SURE IT’S SECURE