CHAIN DRIVEN LIVE ROLLERS ® 68 TREAD ROLLERS: 1.9” dia. x 12 ga. steel, model 192S with sprockets. CHAIN DRIVE: Roll-to-roll no. 40 roller chain. CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor. ROLLER CENTERS: 4”, 6”, 8” or 12” centers available. SPEED: 45 FPM, constant. BEARINGS: Removable type, zinc-plated, grease packed, labyrinth sealed. BED: 5-1/2” x 1-1/2” x 10 ga. and 3-1/2” x 1-1/2” x 10 ga. formed steel channel frame. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional. SPECIFICATIONS Roach model 192CDLR is a medium duty chain driven live roller conveyor. This conveyor is designed to transport loads such as tote pans, castings, drums or pallet loads. MODEL 192CDLR MEDIUM DUTY ROLL-TO-ROLL CHAIN DRIVEN LIVE ROLLER Conveyor shown with optional supports HP @ 45FPM “A” “B” MAX 1/3 13-1/8” 49-1/2” 1/2 13-1/8” 49-1/2” 3/4 13-1/2” 49-1/2” 1 13-3/4” 50-1/16” 1-1/2 14-5/8” 50-3/8” 2 15-1/2” 52-1/16”
13
Embed
MODEL 192CDLR MEDIUM DUTY ROLL-TO-ROLL CHAIN DRIVEN … · 2015-11-16 · TAPERED ROLLER chain driven live roller curve, designed to transport medium duty loads such as castings,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CHA
IN D
RIV
EN L
IVE
ROLL
ERS
®
68
TREAD ROLLERS: 1.9” dia. x 12 ga. steel, model 192S with sprockets.
CHAIN DRIVE: Roll-to-roll no. 40 roller chain.
CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.
ROLLER CENTERS: 4”, 6”, 8” or 12” centers available.
SPEED: Constant speed 1.5-100 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLL-TO-ROLL CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
UNDERTRUSSED BED: Available to provide clearance underneath unit at bed joint locations. Specify location for undertrussing and desired clearance underneath unit. Consult factory.
GUARD RAILS: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed channel (model FC); 1-1/2” angle (model GA1-1/2). See Conveyor Accessories.
CEILING HANGERS: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic starter; one direction manual starter; momentary start/stop push button station; limit switch, photo relay; others available.
OPTIONAL EQUIPMENT
24 hour shipment SPECIFICATION TABLE
OPTIONAL TOP ROLLER GUARD MOUNTED DRIVEROLLER TO ROLLER CHAIN DRIVE (guard removed for clarity)
UNIT WEIGHTS (FOR 4” AND 8” ROLLER CENTERS ONLY)CONVEYOR LENGTH 5’ 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’
TREAD ROLLERS: 1.9” dia. x 12 ga. steel, model 192S with sprockets.*
CHAIN DRIVE: Roller to roller with No. 40 circular roller chain.
END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.
BED: 5-1/2” x 1-1/2” x 10 ga. and 3-1/2” x 1-1/2” x 10 ga. formed steel channel frame.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 45 FPM, constant.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
ROLLER CENTERS: 5” RC measured at outside radius of curve.
ELECTRICAL CONTROLS: Optional.
SPECIFICATIONS
MODEL 192CDLRCMEDIUM DUTY CHAIN DRIVEN LIVE ROLLER CURVE
OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters, ceiling hangers and polytier supports available. See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic or manual starter; limit switch; others available.
*NOTE: Orientation of product may be affected because of straight rollers in curve. To maintain orientation, use tapered roller curve.
4 week shipment
Roach 192CDLRC is a medium duty chain driven live roller curve, designed to transport medium duty loads such as castings or drums. NOTE: When conveying medium duty pallet loads, use model 254TCDLRC, opposite page, to maintain product orientation.
SPECIFY MODEL NUMBER PER EXAMPLE192CDLRC-27-45-L
192CDLRC-(between frames)-(degree)-(left or right)
TREAD ROLLERS: 2-1/2” dia. to 1-11/16” dia. x 14 ga. steel tapered rollers, model 254T with sprockets.
CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.
END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 6” RC measured at outside radius of curve.
CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
BED: 6” x 1-1/2” x 10 ga. and 4” x 1-1/2” x 10 ga. formed steel channel frame.
SPEED: 45 FPM, constant.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
ELECTRICAL CONTROLS: Optional.
SPECIFICATIONS
MODEL 254TCDLRCMEDIUM DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVE
OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters, ceiling hangers and polytier supports available. See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic or manual starter; limit switch; others available.
4 week shipment
Model 254TCDLRC is a medium duty TAPERED ROLLER chain driven live roller curve, designed to transport medium duty loads such as castings, drums or pallet loads. Orientation of pallet loads are maintained when using this chain driven live roller curve.
SPECIFY MODEL NUMBER PER EXAMPLE254TCDLRC-39-90-R
254TCDLRC-(between frames)-(degree)-(left or right)
TREAD ROLLERS: 2-1/2” dia. x 11 ga. steel rollers, model 251S with sprockets.
CHAIN DRIVE: Roller to roller with No. 60 roller chain.
ROLLER CENTERS: 3”, 4-1/2”, 6”, 9” or 12”. (SEE NOTE FOR 3” RC)
CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
BED: 6” x 1-1/2” x 7 ga. and 4” x 1-1/2” x 7 ga. formed steel channel frame. Bed sections attached with couplings and floor supports.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
BEARINGS: Precision ABEC bearings.
CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.
BED LENGTHS (4-1/2” or 9” RC): Intermediate bed section lengths 3’-0”, 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”, 8’-3”, 9’-0” and 9’-9” increments. Minimum overall conveyor length with drive 5’-3”. Maximum overall conveyor length: 58’-6” with 4-1/2” RC; 78’-0” with 9” RC.
BED LENGTHS (6” or 12” RC): Intermediate bed section lengths are available in 1’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.
ELECTRICAL CONTROLS: Optional.
SPEED: 35 FPM, constant.
*NOTE 3” RC: 3” RC are available with #40 chain on 40-14 double single sprocket sleeves.
CONVEYING SURFACE
BETWEEN FRAMES
OVERALL WIDTH
3"
6"
1 1/2" 1 1/2"
4"
1/4"
"A"
3"
SPECIFICATIONS
24 HOUR SHIPMENTS INCLUDE LENGTHS 5’-0” TO 80’-0” AS DETAILED BELOW
Model 251CDLR is a heavy duty chain driven live roller conveyor, specifically designed to transport heavy loads such as tote pans, castings, drums, pallet loads, etc. It is especially suited for carrying loads in the presence of oil and other such contaminates.
MODEL 251CDLRHEAVY DUTY CHAIN DRIVEN LIVE ROLLER
10 1/4"
1 1/2"1 1/2"
3 "
OVERALL WIDTH
BETWEEN FRAMES
CONVEYING SURFACE
6 3/4"
1/4"
Conveyor shown with optional supports
OPTIONAL 3” RC NOW AVAILABLE(guard removed for clarity)
HP @ 35FPM “A” MAX “B” MAX
3/4 13” 38-13/16”1 13-1/4” 39-1/8”
1-1/2 14-1/8” 39-1/8”2 15” 40-13/16”
CHA
IN D
RIVEN
LIVE RO
LLERS
®
73
SPEED: Constant speed 1.5-100 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLL-TO-ROLL CHAIN DRIVE.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); one direction manual starter; momentary start/stop push button station; for-ward/reversing/stop push button station; mounting and pre-wiring for units 12’-0” long and under; limit switch, photo relay; others available.
BED: 4” at 5.4 lb. and 6” at 8.2 lb. structural steel channel frame.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
OPTIONAL EQUIPMENT
24 hour shipment SPECIFICATION TABLE
OPTIONAL TOP ROLLER GUARD MOUNTED DRIVEROLLER TO ROLLER CHAIN DRIVE (guard removed for clarity)
UNIT WEIGHTS (FOR 4-1/2” AND 9” ROLLER CENTERS ONLY)CONVEYOR
TREAD ROLLERS: 2-9/16” dia. x 7 ga. steel rollers, model 297S with sprockets.
CHAIN DRIVE: Roller to roller with No. 60 roller chain.
CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 3”, 4-1/2”, 6”, 9”and 12”.
BED: 4” at 5.4 lbs. and 6” at 8.2 lbs. structural steel channel frame. Bed sections attached with couplings and floor supports.
SPEED: 35 FPM, constant.
BEARINGS: Precision ABEC bearings.
CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.
BED LENGTHS (4-1/2” or 9” RC): Intermediate bed section lengths 3’-0”, 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”, 8’-3”, 9’-0” and 9’-9” increments. Minimum overall conveyor length with drive 5’-3”. Maximum overall conveyor length: 58’-6” with 4-1/2” RC; 78’-0” with 9” RC.
BED LENGTHS (6” or 12” RC): Intermediate bed section lengths are available in 1’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ELECTRICAL CONTROLS: Optional.
*NOTE 3” RC: 3” RC are available with #40 chain on 40-14 double single sprocket sleeves.
SPECIFICATIONS
Model 297CDLR is specifically designed to transport heavy loads such as tote pans, castings, drums, pallet loads, etc. It is especial-ly suited for carrying loads in the presence of oil and other such contaminates. This chain driven live roller includes 7 gauge tread rollers and structural steel frame as standard unit features.
MODEL 297CDLRHEAVY DUTY CHAIN DRIVEN LIVE ROLLER
Conveyor shown with optional supports
OPTIONAL 3” RC NOW AVAILABLE(guard removed for clarity)
HP @ 35FPM “A” MAX “B” MAX
3/4 13” 38-13/16”1 13-1/4” 39-1/8”
1-1/2 14-1/8” 39-1/8”2 15” 40-13/16”
CHA
IN D
RIVEN
LIVE RO
LLERS
®
75
SPEED: Constant speed 1.5-100 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLL-TO-ROLL CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); one direction manual starter; momentary start/stop push button station; forward/reversing/stop push button station; mounting and pre-wiring for units 12’-0” long and under; limit switch, photo relay; others available.
OPTIONAL EQUIPMENT
4 week shipment SPECIFICATION TABLE
OPTIONAL TOP ROLLER GUARD MOUNTED DRIVEROLLER TO ROLLER CHAIN DRIVE (guard removed for clarity)
OPTIONAL EQUIPMENT
UNIT WEIGHTS (FOR 6” AND 12” ROLLER CENTERS ONLY)CONVEYOR
TREAD ROLLERS: 3-1/2” dia. x .300 wall steel, model 3530S with sprockets.
CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.
CENTER DRIVE: Reversible drive either side mounted or underneath mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
BEARINGS: Precision ABEC bearings.
BED LENGTHS (6” RC, #60 CHAIN AND 12” RC, #80 CHAIN): Intermediate bed section lengths 3’-0”, 4’-0”, 5’-0”, 6’-0”, 7’-0”, 8’-0”, 9’-0” and 10’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.
BED LENGTHS (7-1/2” RC, #80 CHAIN): Intermediate bed section lengths 3’-1-1/2”, 3’-9”, 4’-4-1/2”, 5’-0”, 5’-7-1/2”, 6’-3”, 6’-10-1/2”, 7’-6”, 8’-1-1/2”, 8’-9”, 9’-4-1/2” and 10’-0”. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.
ROLLER CENTERS: 6” with No. 60 chain; 7-1/2” and 12” with No. 80 chain.
CHAIN DRIVE: Roller to roller with No. 60 or No. 80 roller chain.
SPEED: 35 FPM constant.
BED: 6” at 8.2 lbs. and 8” at 11.5 lbs. structural steel frame. Bed sections attached with couplings and floor supports.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CAPACITY: 2500 lbs. per roller.
ELECTRICAL CONTROLS: Optional.
SPECIFICATIONS
MODEL 3530CDLRHEAVY DUTY CHAIN DRIVEN LIVE ROLLER
Roach model 3530CDLR is ideal for transporting very heavy unit loads. This heavy duty chain driven live roller is designed with heavy .300 wall steel rollers, larger size roller chain and heavy duty structural frame and supports for applications demanding ultra-durable construction for longevity and durability.
Conveyor shown with optional supports
HP @ 35FPM “A” “B” MAX
3/4 16” 38-13/16”1 16-1/4” 39-1/8”
1-1/2 17-1/8” 39-1/8”2, 3 18-1/2” 40-13/16”
2 18-1/2” 41-13/16”
CHA
IN D
RIVEN
LIVE RO
LLERS
®
77
SPEED: Constant speed 1.5-100 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLL-TO-ROLL CHAIN DRIVE.
FLOOR SUPPORTS: Supports and knee braces available. See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); one direction manual starter; momentary start/stop push button station; forward/reversing/stop push button station; mounting and pre-wiring for units 12’-0” long and under; limit switch, photo relay; others available.
MOTORS: Available through 5 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
OPTIONAL EQUIPMENT
4 week shipment SPECIFICATION TABLE
OPTIONAL TOP ROLLER GUARD MOUNTED DRIVEROLLER TO ROLLER CHAIN DRIVE (guard removed for clarity)
TREAD ROLLERS: 2-1/2” dia. x 11 ga. steel, model 251S with sprockets.
CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.
END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
BEARINGS: Precision ABEC bearings.
ROLLER CENTERS: 6” RC measured at outside radius of curve.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 35 FPM, constant.
BED: 6” x 1-1/2” x 7 ga. and 4” x 1-1/2” x 7 ga. formed steel channel frame.
CHAIN GUARD: The chain drive is enclosed, top and bottom, along the entire length of the conveyor.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
ELECTRICAL CONTROLS: Optional.
SPECIFICATIONS
MODEL 251CDLRCHEAVY DUTY CHAIN DRIVEN LIVE ROLLER CURVE
OPTIONAL EQUIPMENT
BED: Rollers on 4-1/2” centers on outside radius.
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters, and polytier supports available. See Conveyor Accessories.
*NOTE: Orientation of product may be affected because of straight rollers in curve. To maintain orientation, use tapered roller curve.
251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.
4 week shipment
SPECIFY MODEL NUMBER PER EXAMPLE251CDLRC-39-90-L
251CDLRC-(between frames)-(degree)-(left or right)
TREAD ROLLERS: 2-9/16” dia. x 7 ga. steel, model 297S with sprockets.*
CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.
END DRIVE: Reversible drive, either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.
ROLLER CENTERS: 6” RC measured at outside radius of curve.
BED: 4” at 5.4 lbs. and 6” at 8.2 lbs. structural steel channel frame.
BEARINGS: Precision ABEC bearings.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 35 FPM, constant.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
ELECTRICAL CONTROLS: Optional.
SPECIFICATIONS
MODEL 297CDLRCHEAVY DUTY CHAIN DRIVEN LIVE ROLLER CURVE
OPTIONAL EQUIPMENT
BED: Rollers on 4-1/2” centers on outside radius.
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters, and polytier supports available. See Conveyor Accessories.
*NOTE: Orientation of product may be affected because of straight rollers in curve. To maintain orientation, use tapered roller curve.
Model 297CDLRC features structural steel channel frames for conveying heavy unit loads. Heavy cast-ings, drums and numerous other loads not requiring product orientation may be transported on this heavy duty chain driven live roller curve.
4 week shipment
SPECIFY MODEL NUMBER PER EXAMPLE297CDLRC-57-45-R
297CDLRC-(between frames)-(degree)-(left or right)
TREAD ROLLERS: Heavy duty 11 ga. tapered rollers, model 351T with sprockets, for true taper effect. See chart, upper right corner for roller dia.
CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.
END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 6” RC measured at outside radius of curve.
SPEED: 35 FPM, constant.
BED: 5” at 6.7 lbs. and 7” at 9.8 lbs. structural steel channel frame.
BEARINGS: Precision ABEC bearings.
CHAIN GUARD: The chain drive is enclosed, top and bottom, along the entire length of the conveyor.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
ELECTRICAL CONTROLS: Optional.
SPECIFICATIONS
MODEL 351TCDLRCHEAVY DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVE
OPTIONAL EQUIPMENT
BED: Rollers on 4-1/2” centers on outside radius for 21”-39” BF.
FLOOR SUPPORTS: Supports avail-able. See Conveyor Accessories.
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
6 week shipment
351TCDLRC is a true taper heavy duty chain driven live roller curve. Ideal for conveying pallets or other heavy unit loads, this conveyor features “true taper” to maintain product orientation throughout the curve.
SPECIFY MODEL NUMBER PER EXAMPLE351TCDLRC-51-90-R
351TCDLRC-(between frames)-(degree)-(left or right)
Conveyor shown with side mounted drive and optional supports