Mobile Video Production "Flypack" CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited. SPECIFICATIONS
Mobile Video Production "Flypack"
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
SPECIFICATIONS
2
TABLE OF CONTENTS
1. VIDEO DESIGN AND SUPPORT
A. HD Recorder
B. HD Rack Monitoring
C. Utility Monitor
D. Program and Multiview Monitors
E. HD Switching and Routing
a. Video Control 2 ME Surface
b. Video Switcher 2 ME
c. Redundant Power Supply for Switcher
d. Rack Mount System for Switcher and Control Surface
e. Aux 16x1 Control Panels
F. HD Scan convergence
2. CAMERAS
A. HD PTZ Video Cameras
B. HD PTZ Video Controller
3. TRIPODS
A. Camera Support
B. Heads and Arms
C. Tripod Legs and Accessories
4. AUDIO DESIGN AND SUPPORT
A. Audio and Mixer Processing
B. Production Speakers & Processing
C. Audio Embedder
D. Audio Distribution
E. Intercom Systems
a. Wired Specs
b. Wireless Specs
c. UHF 2-Audio Channel Wireless Synthesized Base Station
d. UHF 2-Audio Channel Wireless Synthesized Transceiver
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
3
5. CUSTOM REMOTE CASE SYSTEM
A. Fly Pack Case
B. Fly Pack Accessory Case
C. Tripod Cases
D. Utility Support
E. Other Rackmount Items
6. CABLE MANAGEMENT
A. Specialty Cables
7. POWER MANAGEMENT
A. Power Distro
B. UPS Backup
8. ENGINEERING
A. Networking
B. IO Panels
C. Sub IO Panel
D. Intercom Diagram
E. Video Diagram
F. Audio Diagram
G. Switcher Dimensions
H. Flypack Model
I. Assembly
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
4
1. VIDEO DESIGN AND SUPPORT
A. HD Recorder
Blackmagic HyperDeck Studio Pro
Quantity: 4
SSD recorder is a broadcast HD based solid state deck that includes 3G-SDI and HDMI
connections so you can work in all SD and HD formats up to 1080p30.
You get familiar VTR style controls so it’s just like using a traditional broadcast deck,
along with compressed or uncompressed 10-bit 4:2:2 broadcast quality recording.
The SSD recorder must have dual SSD record capability with automatic switchover.
CONNECTIONS
SDI Video Input
1 x 10-bit SD/HD/3G-SDI Switchable.
SDI Video Output
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
5
2 x 10-bit SD/HD/3G-SDI Switchable. 1 x 10-bit SD/HD/3G-
SDI switchable loop output.
1 x 10b-bit SD/HD/3G-SDI switchable monitor.
HDMI Video Input
1 x HDMI type A Connector
SDI Audio Input
16 channels embedded in SD and HD in QuickTime files. 2 Channels in Avid DNxHD
MXF files.
SDI Audio Output
16 channels embedded in SD and HD in QuickTime files. 2 Channels in Avid DNxHD
MXF files.
HDMI Audio Input
8 channels embedded in SD and HD in QuickTime files. 2 Channels in Avid DNxHD
MXF files.
HDMI Audio Output
2 channels in Avid DNxHD MXF files.
Media
2 x SSD for SD and HD recording.
Media Type
SATA-II OR SATA-III solid state disc.
Media Format
Can format discs to ExFAT (windows/Mac) or HFS + (Mac) file systems.
Reference Input
Tri-Sync or Black burst.
External Control
RS-422 deck control, SDI start/stop. Timecode run. Includes Ethernet control protocol.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
6
Built-in Control Panel
12 buttons for transport and menu control, 2.2 color display.
Recorder Configuration
Front Panel configurable or USB 2.0 high speed interface.
Computer interface
1 x type B USB 2.0 port for initial setup, software updates utilities.
SSD REORDER STANDARDS
SD Video Standards
525i59.94 NTSC, 625i50 Pal
HD Video Standards
720p50, 720p59.94, 720,60
1080p23.98, 1080p24, 1080p25
1080p29.97, 1080p30
1080PsF23.98, 1080PsF24, 1080PsF25
1080PsF29.97, 1080PsF30
1080i50, 108059.94, 1080i60
SDI Compliance
SMPTE 259M, SMPTE 292M
SDI Meta Support
HD RP188 and closed captioning.
Audio Sampling
Television standard sample rate of 48KHZ and 24-bit
Video Sampling
4:2:2
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
Color Precision
10-bit
Color Space
REC 601, REC 709
SDI Rates
270Mb, 1.5G-SDI, 3G-SDI
Copy Protection
HDMI input is unable to capture from copy protected HDMI sources. Always confirm
copyright ownership before capture or distribution of content.
Codec Support
Uncompressed QuickTime, Apple ProRes 422 HQ QuickTime, ProRes 422 QuickTime,
ProRes 422 LT QuickTime, ProRes 422 Proxy QuickTime, Avid DNxHD QuickTime,
Avid DNxHD MXF up to 1080160
Display
Built-in LCD for video, audio and timecode monitoring and menu settings.
B. HD Rack Monitoring – Slide Out Unit
Datavideo TLM-170GM
Quantity: 1
Broadcast monitor has an on-screen menu which allows control and setup of brightness,
contrast, saturation, hue, sharpness, color temperature, and picture in picture.
The menus can also be used to display onscreen overlays for frame marker, 4:3 marker,
16:9 marker, Cinema Zone marker, Center Point, embedded SDI Timecode and monitor
title.
The front panel buttons allow selection of source input as well as PIP, Aspect ratio, Blue
only, Pattern (Color Bars), menu and audio controls. In HD/SD sources via the rear
panel SDI, HDMI, component (Y, Pb, Pr) and composite connections as well as
monitoring RCA phone or embedded SDI/HDMI audio.
7
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
8
FEATURES
• 17.3” (1600x900 LCD TFT Display
• Digital Video Inputs: SD/HD-SDI with loop thru and 2X HDMI
• Digital Audio Inputs: via SDI or HDMI inputs
• Analogue Video Inputs: Component (Y.Pb,Pr), Composite x2 with loop thru
• Mono Audio Inputs: Single RCA phono socket for analogue
• Head Phone 3.5 stereo jack socket for discrete audio monitoring
• Front Panel Buttons allow quick and easy selection of source input as well as PIP, Aspect ratio, Blue Only, Pattern (Color Bars), Menu and audio controls
• Color temperature menu option has 3 modes (6500k, 9300K, and user defined)
• OSD audio level peak meter for SDI and HDMI based
• On screen overlays for frame marker 80%, 90%, 4:3 marker, 16:9 marker, Cinema zone marker, center point, embedded SDI Timecode and monitor title
• 8 Ch-Audio level display Mute Button
• Bi-color Tally light (Red or Amber) and 3.5mm Jack Tally input socket
• Analogue audio external speaker outputs L-, L+ and R-, R+, max 5V p- p (2w)
• Supports Pixel Zoom up to 8X
• RJ-45 TCP/IP connection allows remote set up of the monitor using a PC/Mac based browser
• USB 2.0 port for easy update of firmware
C. Utility Monitor
Ikan VXF7 Monitor with Deluxe Kit
Quantity: 1
Kit includes 2 Sony DV batteries, DV battery charger, Sony DV battery plate, hard
case, AC adapter and a SM201 shoe mount.
MONITOR SPECIFICATIONS
Aspect Ratio
16:10
Backlight
LED
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
9
Brightness
300 cd/m2
Build Material
Heavy Duty Plastic
Color Depth
16.7 Million
Color System
PAL/NTSC/SECAM (Auto-Detected)
Contrast Ratio
800:1
Diagonal (inch)
7”
Dimensions
7.36 x 5.6 x 1.3”
Dimensions (Metric)
187 x 142 x 33mm
Display Technology
IPS
Input Voltage
DC 6V – 24V
Inputs
3G-SDI, HDMI, Component, Composite
Outputs
3G-SDI, HDMI, Component, Composite
Pixel Pitch
0.07875x0.07875 (mm)
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
10
Power Consumption
11w
Resolution
1920 x 1200
Response Time
20ms
Weight
1 lbs.
Viewing Angel
178 horizontal/178 Vertical
D. Program and Multiview Monitors
Samsung 32” UD970 UHD Monitor
Quantity: 2
The program and multiview monitors are an essential component to the operation of the
video system. The 32” UHD monitor is an outstanding choice when accurate content
production is critical. A 32" panel provides about 40% more screen real estate than a
standard 27" display, while UHD (3840 x 2160) ultra high resolution provides four times
the resolution of standard 1920 x 1080 FHD monitors. Designed for color critical
applications, this monitor delivers 100% sRGB color compliance, along with 11 color
space calibration options. Experience a truly best-in-class display for professional
content use and creation.
You must have 2 monitors. 1 monitor is for the program/preview and 1 monitor is for the
multiview.
MONITOR SPECIFICATONS
Screen Size
31.5”
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
11
Screen Resolution
UHD 3840 x 2160 (4K)
Display Type
LED
Aspect Ratio
16:9
Brightness
350cd/m2 (Highest Brightness Setting)
Static Contrast Ratio
1000:1 (Typ)
Viewing Angle (Horizontal/Vertical)
178/178
Response Time
8 (GTG)ms
Color Support
1B(True 10bit)
Power Supply Type
AC100-240V (50/60 Hz)
Refresh Rate
60Hz
Product Dimensions w/o Stand
28.7” x 16.8 x 2.4”
Product Weight w/o Stand
22.7 lb.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
12
INPUTS
HDMI
1 x 1.4
Display Port
2 x 1.2
E. HD Switching and Routing
a. Video Control 2 ME Surface
FOR-A HVS-392ROU 2 M/E 12 Button
Quantity: 1
The control surface is necessary to operate the video switcher. The control surface
is easy to operate, safe and reliable for live operations.
FEATURES
• 12 Button Control per M/E
• 2 M/E
• 2 M/E bars
• DVE and Key abilities
DIMENSIONS
Length
1.4’
Width
1.3’
Height
5”
Switcher and surface must be linked to Arcnet.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
13
HVS-39PSO redundant power supply needed.
b. Video Switcher 2 ME
FOR-A HVS-390HS
Quantity: 1
The video switcher offers broadcast reliability, performance and versatility with extended
functionality and operability. Standard features include mixed SD/HD input, frame
synchronizer, 2.5D and 3D wipe effects, DVE’s, Keyer with Chroma key, still frame
storage, picture in picture and 2 multi-viewers.
The main frame of the switching unit is a maximum of 3Us. A rackmount kit must be
included. The switcher was must hardware based, not software based.
FEATURES
• 4 x Keyers on each M/E, including 2 high quality Chroma Keyers. They can also
be used as Keyers and/or Picture in Picture.
• Assign up to 4 x Keyers to an AUX output or M/E output.
• All Keyers include DVE with resize and perspective/tilt, etc.
• 2 x 3D DVE’s on each M/E for background and Keyer transitions.
• CG Wipe engine on each M/E offering animated wipe/mix transitions.
• Includes Web Browser GUI control interface over IP.
• FTP access for stills and clip sequences. Stills can also be imported over USB.
• Industry leading color correction with 2 per M/E. It’s assignable for inputs or
entire bus.
• 4 x Up converters
General Specifications
Inputs
16 SDI
Outputs
8 x SDI
1 x HDMI
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
14
AUX Outputs
6
Video Formats
1080i 59.94 / 50
1080PsF 29.97 / 25 / 24 / 23.98
720p 59.94 / 50
525/60 (NTSC)
625/50 (PAL)
Video Inputs
HD-SDI 1.5 Gbps
SD-SDI 270 Mbps
Signal Processing
4:2:2 Digital Component
AUX Outputs
6
Power
100 V AC to 240 V AC 50/60 Hz
INTERFACES
Type Level Connector
Ethernet 100BASE-TX/1000BASE-T RJ-45 x 1
Editor - 9-pin D-sub (Female) x 6
RS-422 - 9-pin D-sub (Female) x 6
GPI In - 15-pin D-sub (Female) x 1
10 Outputs
Tally Out - 25-pin D-sub (Female) x 1
20 Outputs
Arcnet 75 BNC x 1, loop-through
(Must be terminated with 75, if
unused)
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
CARDS NEEDED:
• FOR-A HVS-30PCO DVI/VGA Output Card
o Quantity: 2
o Output 1 & 2 (C & D)
• FOR-A HVS-30PCIN DVI/VGA Input Card
o Quantity: 1
o Input 1 (A)
COMPONENTS NEEDED:
• FOR-A HVS-39PSM Redundant Power Supply
o Quantity: 1
c. Redundant Power Supply for Switcher
The video switcher requires redundant power supplies in case of a failure.
FEATURES
• 2 Redundant Power Supplies
• Automatic failover
d. Rack Mount System for Control Surface
FOR-A HVS-392OURK Rack Mount Kit
The video switcher and surface both require a rackmount system for secure and safe
transport. Both rack mounts kits must be for a full-size equipment rack.
e. Aux 16x1 Control Panels
FOR-A HVS-AUX16
Quantity: 2
The AUX 16x1 control panels allow for the switching of up to 16 different sources on 1
AUX output. The unit is fully routable and each button is customizable. The AUX 16x1
15 CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
16
control panel is connected to the main switcher. A full
rackmount kit is required and included.
General Specifications
Connection Protocol
Arcnet
Connection Method
Ethernet
f. HD Scan Convergence
Blackmagic Teranex Mini HDMI to SDI 12G Converter
Quantity: 2
Convert from HDMI to 12G-SDI. It works with all video formats including HD, SD, 6G
and 12G-SDI rates and includes an up converter for converting HD to Ultra HD. Embed
audio from balanced analog or AES/EBY and timecode input. It’s ideal for converting
HDMI consumer cameras to SDI or adding SDI outputs to computers with HDMI
connections.
CONNECTIONS
SDI Video Output
Automatically matches the SD, HD and 12G-SDI HDMI video input.
AES/EBU Audio Input
4 channels of professional 110 balanced digital audio via XLR connectors.
Multi Rate Support
Automatic switching between SD/HD/2K and 4K.
XLR Audio Input
2 channels professional balanced analog audio via XLR connectors. Right XLR can be
configured for timecode input.
HDMI 2.0
1 x HDMI type A connector with support for 2160p60.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
17
General Specifications
Re-Clocking
Yes
SDI Output Formats
SD Format Support
525i29.96 NTSC
625i25 PAL
HD Format Support
720p 50 / 59.94 / 60 Hz
1080p 23.98 / 24 / 25 / 29.97 Hz
1080p 30 / 50 / 59.94 / 60 Hz
1080i 50 / 59.94 / 60 Hz
SDI Video Rates
SDI video connections are auto switching between standard definition SDI, high
definition level A and B 3G-SDI, 6G-SDI, and 12G-SDI.
SDI Video Sampling
4:2:2
4:4:4
SDI Audio Sampling
Television standard sample rate of 48 kHz and 24-bit.
SDI Color Precision
4:2:2
4:4:4
SDI Color Space
YUV
HDMI Input Formats
SD Format Support
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
18
525i29.97 NTSC
625i25 PAL
HDMI Format Support
720p 50 / 59.94 / 60
1080p 23.98 / 24 / 25 / 29.97 / 30 / 50
1080p 59.94 / 60
1080i 50 / 59.94 / 60
HDMI Color Space
REC 601
REC 709
HDMI Color Precision
YUV 4:2:2 and RGB 4:4:4 in HD, 2K, and 4K.
ADDITIONAL COMPONENTS NEEDED:
• Teranex Mini Smart Panel
o Quantity: 2
• Teranex Mini Rack Shelf
o Quantity: 1
Blackmagic Teranex Mini SDI to HDMI 12G Converter
Quantity: 2
Convert from 12G-SDI to HDMI. It supports all video formats including SD, HD, 6G and
12G-SDI rates and includes a down converter when working with a HDMI monitor and it
automatically selects the best format it can support. It can also de-embed audio to
balanced analog or AES/EBU format and timecode output.
CONNECTIONS
SDI Video Input
1 x 12G-SDI SD/HD/2K/4K Auto Switching
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
19
Analog Audio Output
2 channels of professional balanced analog audio via XLR
connectors.
Multi Rate Support
Automatic switching between SD/HD/2K and 4K. Includes Instant Lock on HDMI output.
SDI Video Output
1 x 12G-SDI Loop Output
HDMI
1 x HDMI 2.0 type A connector with support for 2160p60.
AES/EBU Audio Output
4 channels of professional 110 balanced digital audio via XLR connectors.
General Specifications
Re-Clocking
Yes
SDI Input Formats
SD Format Support
525i29.97 NTSC
625i25 PAL
HD Format Support
1080PsF 23.98 / 24 / 25
1080PsF 29.97 / 30
SDI Video Rates
SDI video connections are auto switching between standard definition SDI, high
definition level A and B 3G-SDI, 6G-SDI, and 12G-SDI.
SDI Video Sampling
4:2:2
4:4:4
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
20
SDI Audio Sampling
Television standard sample rate of 48 kHz and 24-bit.
SDI Color Precision
4:2:2
4:4:4
SDI Color Space
YUV and RGB. 33 Point can be loaded.
HDMI Output Formats
SD Format Support
525i29.97 NTSC
625i25 PAL
HDMI Format Support
720p 50 / 59.94 / 60
1080p 23.98 / 24 / 25 / 29.97 / 30 / 50
1080p 59.94 / 60
1080i 50 / 59.94 / 60
HDMI Color Space
REC 601
REC 709
HDMI Color Precision
YUV 4:2:2 and RGB 4:4:4 in HD, 2K, and 4K.
ADDITIONAL COMPONENTS NEEDED:
• Teranex Mini Smart Panel
o Quantity: 2
• Teranex Mini Rack Shelf
o Quantity: 1
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
21
Barco ImagePRO-II All in One Scan Converter, Scaler
and Switcher with Dual Link and Audio - #R9004668
Quantity: 1
The all in one scan converter, scaler and switcher with dual link and audio modules can
convert any input signal to any required output format. This unit supports universal
analog, DVI single/dual link, HDMI, DisplayPort and all SD/HD/3G SDI signal formats.
Loop-through outputs are provided for the analog, DVI and SDI inputs.
FEATURES
• 12-bit Processing
• HDCP and EDID Management
• USB Backup/Restore
• Video Effects
• Web Interface over IP
The unit also has a Dual Link module which adds a second scaled output with an
included upgrade card. The output card includes three additional SDI connections which
support the input, loop and output signals. Each of the output’s resolution, frame rate,
AOI, effects, or pan and zoom can be configured separately as needed.
Included with the converter, scaler, and switcher is the audio module upgrade. This
upgrade adds an audio mezzanine board that gives you access to embedded audio
from the video input signal. The board features a DB-25 connector which provides an
I/O interface for four analog and eight AES digital channels.
A Barco R767423K DB-25 audio breakout cable is required.
2. CAMERAS
A. HD PTZ Video Camera
Datavideo PTC-150T HD/SD PTZ Video Camera with HDBaseT
Quantity: 3
CAMERA SPECIFICATIONS
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
22
Video Output
HD/SD-SDI x 1
CVBS x 1
HDMI x1 (V1.3)
Video Format Output: 1 V p-p / 75 ohms
Video Format
1080p 59.94 / 50 / 30 / 29.97/ 25 Hz
1080p 59.94 / 50 Hz
720p 59.94 / 50 Hz
4801, 576i (on CVBS)
Image Senor
½.8 type MOS
Effective Pixels
2 Megapixels
Min. Illumination
Color: 0.4 Lux, B/W: 0.03 Lux
Electronic Shutter
1/50 – ½,000 sec
Zoom Ratio
22x Optical zoom
Gamma
Yes, 4 models
Iris Control
Auto/Manual
Digital Noise Reductions
Yes
White Balance
AWB / AWC / Manual (adjustable R and B signals)
Outdoor / Indoor / Fluorescent
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
23
AGC / Gain Control
Low 1 / Low 2/ Low / Mid 1 / Mid / High 1/ High / OFF
(Gain adjustable)
Mirror / Flip Image
Yes
Focus Mode
Auto / Manual / One-Push / Stop-AF
Panning / Titling Range
Pan: 270 Degrees, Tilt: + 90 to -20 Degrees
Preset
50 Positions
Field of View
65.1 Degree
Image Compensation
DeHazing, Day Night function
Tally LED
Dual Color
Remote Control Interface
RS-422, DVIP (Rj45)
Power Input
DC 12V 0.5 A
Dimensions (W x H x D)
310 x 79.49 x 186.78mm / 12.2 x 3.13 x 7.35”
Weight
3.1lbs / 1.4kG
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
24
ADDITIONAL COMPONENTS NEEDED:
• HBT-11 Receiver Box
o Quantity: 3
B. HD PTZ Video Controller
Datavideo RMC-180 PTZ Camera Control Unit
The Camera Control unit offers remote controlling of multiple camera options such as
pan, tilt, zoom, iris, focus, gain, and white balance. It can support multiple cameras over
more than 1000m via network cabling. The network cable can support data and power
with a single cable. Being compact in size (310 x 186.78 x 79.49mm), and easy to
install, the camera control unit is ideal for use in educational institutions.
With the joystick, you can control the speed of the pan, tilt, and zoom movements.
Multiple presets for pan, tilt and zoom for each individual camera can also be stored.
Information and settings of the cameras it controls is displayed on the LCD panel.
FEATURES
• Remote control for multiple tilt Zoom cameras
• Pan, Tilt Zoom with speed control by large joystick
• Control of Pan, Tilt and Zoom as well as iris, focus gain and other functions over
Ethernet
• Multiple presets for Pan, Tilt, Zoom for each individual camera
• Full remote control of each camera via serial communication over affordable
network cabling
• Compatible with switchers tally indicators
• Compact design for easy installation
3. TRIPODS
A. Camera Support
Camgear ENG/CF-MLS100 Carbon Fiber Tripod
Quantity: 3
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
25
FEATURES
• 2-stage 100mm bowl tripod.
• Sturdy and robust design for the most demanding applications.
• Quick locking system with fast action transport clips.
TRIPOD SPECIFICATIONS
Payload Range
0-33 lbs.
Weight
17.9 lbs.
Maximum Height
65.4”
Minimum Height
27.2”
Transport Length
34.6”
B. Heads & Arms
Camgear V15P Fluid Head
Quantity: 3
For optimal operation, the tripod must have a fluid head attachment.
FLUID HEAD SPECIFICATIONS
Payload Range
0-33 lbs.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
26
Camera Platform Type
Mini Euro Type
Sliding Range
27.5”
Camera Plate
1/4” and 3/8” screw
Counterbalance
9 steps (1-8 & 1 adjusting lever)
Tilt & Pan Drag
6 steps (1-6)
Tilt Range
+90/-75
Pan Range
360
Operating Temperature
-40 to +140 F
Leveling Bubble
Illuminated Leveling Bubble
Weight
7.4 lbs.
Bowl Diameter
3.9”
TRIPOD ARMS
ADDITIONAL COMPONENTS NEEDED:
• Camgear PB-1 Pan Bar
o Quantity: 3
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
27
C. Tripod Legs and Support
Camgear MSP-2 Mid Level Spreader and CS-1 Ground
Spreader
Quantity: 3
The Ground Spreader is designed for use with most tripods. It has a buildup radius of
331.5 to 45.7” and is constructed of aircraft grade plastic.
Tripod must also have a middle spreader for extra stability when at maximum height.
4. AUDIO DESIGN AND SUPPORT
A. Audio and Mixer Processing
Yamaha TF-RACK
Quantity: 1
General Specifications
Outline TF-Rack
Mixing Capacity Input Channels 40 (32mono +2 stereo +2 return)
Aux Buses 20 (8 mono + 6 stereo)
Stereo Buses 1
Sub Buses 1
Input Channel Functions 8 DCA Groups
I/O Inputs 16 mic/line (XLR/TRS combo) + 1
line (RCA pin)
Outputs 16 (8 XLR = 8 TRS phone
Expansion slots 1 (for NY64-D)
On-Board Processors DSP 8 Effects + 10 GEQ
Sampling Frequency Internal 48 KHz
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
28
Signal Delay Less
than
2.6 ms, INPUT to OMNI OUT,
Fs=48KHz
Fader Resolution = 10-bit, + 10dB to –
138 dB – dB all faders
Total Harmonic Distortion Less than 0.05% 20Hz @+4 dBu
into 600 , INPUT to OMNI OUT,
Input Gain =Min. (Measured with
a -18 DB/octave filter @80KhZ)
Frequency Response +0.5, -1.5 dB 20Hz, refer to +4 dBu output @ 1kHz, Input to
OMNI OUT
Dynamic Range 110 dB typ., DA Converter, 108
DB typ., INPUT to OMNI OUT,
INPUT GAIN=Min.
Hum & Noise Level Equivalent Input Noise -128dBu typ., Input GAIN=MAX.
(Measured with an A-Weight
filter)
Residual Output Noise -85 dBu, ST master off
(measured with an A Weight
filter)
Crosstalk -100 dB (Measured with a -30
dB/Octave filter@22 kHz,
Adjacent INPUT/OMNI OUT
channels, Input Gain=MIN
Power Requirements 100-240 V 50/60 Hz
Power Consumption 85 W
Dimensions W 480 mm (5-14 in)
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
29
H 132 mm (5-1/4 in)
D 409 mm (16-1/8 in)
Net Weight 9.2 kg (20.3lb)
Accessories Quick Guide, Power Cord
NUENDO LIVE (DAW Software),
Rubber stoppers (4)
Options Audio Interface Card (nY-64D),
Foot Switch (FC5)
Others Operating temperature range: 0-
40 °C, Storage temp range -20-60
°C
RECORDING /PLAYBACK
PC/MAC (USB2.0) Recording 34 tracks, Playbacks
34 tracks
USB Storage Device Recording 2 tracks (USB hard
drive/SSD)*, Playback 2 tracks
(USB hard drive/SSD thumb
drive)
ANALOG INPUT CHARACTERISTIC
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
30
Input
Terminals
GAIN Load
Impedance
For use
with
Nominal
Input Level Connector Balanced
/unbalanced
Sensitivity*1 Nominal Max.
before
clip
Input 1-16 +66dB 7.5K 50-
600
Mics or
600
Lines
-82dBu
(61.6v)
-62dBu
(0.616mV)
-42dBu
(6.16mV)
Combo
Jack (XLR
3-31 type
*2 or TRS
phone *3
Balanced
-6dB -10dBu
(245mV)
+10dBu
(2.45V)
+30dBu
(24.5V)
ST IN - 10K 600
Lines
-30dBV
(31.6V)
-10dBV
(316mV)
+10dBV
(3.16V)
RCA Pin
Jack
Unbalanced
ANALOG OUTPUT CHARACTERISTICS
Output
Terminals
Source
Impedance
For Use
Nominal
Output Connector Balanced
/unbalanced
Nominal Max. Before
clip
OMNI OUT 1-
8
75 600 +4dBu
(1.23V)
+24dBu
(12.3V)
XLR-3-32
type*1
Balanced
OMNI PUT 9-
16
Phones 100K 40 3mW 75mW Stereo Phone
Lack (TRS)*2
Unbalanced
DIGITAL INPUT/OUTPUT SPECS
Terminals Format Data Length Data Length Connector
USB (TO HOST) USB 24bit 34 Ch Input. 34 Output, PCM USB (B type)
iPad USB - Playback: MP# or WAV File
Data/Record: WAV file Data
USB (A type)
CONTROL I/O SPECS
Terminals Format Level Connector
NETWORK 1EEE802.3 10BASE-T/100BASE-TX RJ-45
FOOT SW - - TS Phone
*1 1: GND, 2: Hot, 3: VCOLD
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
31
*2 Tip: Left, Ring: Right, Sleeve: GND
*3 In these specifications, 0dBu=0.775 Vrms
*4 All output DA converters are 24bit, 128times oversampling
*5 The position of the level control is lowered by 16dB from the maximum
*6 Tip: HOT, RING: COLD, Sleeve: GND
B. Production Speakers and Processing
Fostex RM-3 Rackmount 20W Speaker System
Quantity: 2
• Rack mount stereo monitor speaker system with built-in 10w+10w Class-D amplifier and 100x140mm elongated shape speaker units
• Accepts both Analog input (XLR & ¼” TS Phone, and Digital Inputs (AES/EBU)
• Headphone out for headphone monitoring. When switching form headphone out to speaker out or vice versa, the output signal fades in to avoid unexpected level difference.
• Mute switch works as total mute or 20dB attenuation
• Highly visible 26-dot LED meter (L&R) with 4-step brightness adjustment
• Flexible meter setting for both Analog and Digital inputs as VU+Peak, VU+Peak Hold, Peak+Peak Hold and VU only
• Reference level (0dB) is selectable between +4dBu and 0dBU
• Audio characteristics can be selected between the conventional VOICE mode and new MU-SIC mode for wider frequency range music source
C. Audio Embedder
Teranex Mini Audio to SDI 12G
Quantity: 2
Embed up to 2 channels of analog audio or 4 channels of AES/EBU digital audio into
any SD, HD, Ultra HD or 4K SDI connection. You can take audio from devices such as
audio mixers and embed it into SDI video connections for use with SDI routers and
decks.
CONNECTIONS
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
SDI Video Input
1 x 12G-SDI SD/HD/2K/4K Auto Switching.
Analog Audio Input
2 x Channels of Professional Balanced Analog Audio via XLR Connectors
AES/EBU Audio Input
4 x Channels of Professional Balanced Digital Audio via XLR Connectors. The right
channel can be configured for timecode input.
SDI Video Output
1 x 12G-SDI Output
Optical Audio Input
1 x S/PDIF Signal with TOSLINK Connector
General Specifications
Re-Clocking
Yes
SDI Auto Sampling
Television standard sample rate of 48kHz and 24-bit.
ADDITIONAL COMPONENTS NEEDED:
• Teranex Mini Smart Panel
o Quantity: 2
• Teranex Mini Rack Shelf
o Quantity: 1
D. Audio Distribution
Kramer VM-1110XL Balanced Audio Distribution Amplifier
Quantity: 2
The unit can distribute mono or stereo balanced audio. In the stereo configuration, it
operates as a 1x5 DA, in the mono configuration it is a 1x10 DA.
32 CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
33
This unit must be 19” rack mounted.
CONNECTIONS
Input
2 x Balanced Audio +4 dBm @ 50K ohms XLR connectors
Output
10 x Balanced Audio +4 dBm @ 50 ohms XLR connectors
SPECIFICATIONS
Coupling
DC
Audio Bandwidth
100 kHz
Signal to Noise Ratio (SNR)
89 dB
Audio THD
0.081%
Audio Control
Left and Right Level Control
ESE ES-102U GPS Time Code Generator and Master Clock
Quantity: 1
The unit receives time and date information from Global Positioning System satellites
and supplies this data to the user in the form of SMPTE / EBU, ASCII (RS-232C &
USB). A display provides a digital view of the Hours, Minutes and Seconds data.
FEATURES
• SMPTE/EBU, ASCII (RS-232C & USB)
• Dual 1 PPS Output (20% and 50% Duty Cycles)
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
34
• Rugged Rack Mount Enclosure
• Six .56” Yellow LED Displays
• GPS “Lock” Indicator
• 500 Nano-Second Accuracy
• Time Zone Offset
• +/- 10 Second Offset
• Automatic Daylight Savings Time Correction
• Legally Traceable to UTC (Universal Coordinated Time)
• Loss of GPS Signal Output
• Indoor/Outdoor Antenna with 16’ Cable
BrightEye 40 Re-clocking Serial Digital Video Distribution Amplifier with
Rackmount Kit
Quantity: 4
This re-clocking serial digital video distribution amplifier has four outputs. The SDI input
will automatically equalize up to 300 meters (1000 feet) of digital cable. Following
equalization, the 270 Mb/s SDI input signal is re-clocked before being delivered to four
simultaneous SDI outputs.
This unit must be 19” rack mounted.
A BrightEye Spider Power Supply (BEPS6) is required to power up to 6 BrightEye units.
E. Intercom Systems
a. Wired Specs
Clear-Com MS-702 2-Channel Rackmount Base Station
Quantity: 2
Clear-Com RS-702 Dual Channel Wired Beltpack
Quantity: 4
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
35
TECHNICAL SPECIFICATIONS
Panel Microphone Input
Input Type: Electret
Input Impedance: >=2KΩ
Mic Limiter Threshold: 0 dBu ±3 dB
Mic Limiter Range: >= 20 dB
Headset Microphone Input
Input Type: Dynamic
Input Impedance: >= 1KΩ
Mic Limiter Threshold: 0 dBu ± 3dB
Mic Limiter Range: >= 15 dB
Program Line Input
Maximum Level before Clipping: >= 20 dBu
Input Impedance: >= 5KΩ
Headset Output
Load Impedance: >= 8Ω
Output Impedance: <= 25Ω
Output Limiter Threshold: +5 dBu ± 3 dB
Maximum Output Level before Distortion: >= 17 dBu
Speaker Output
Load Impedance: >= 4Ω
Max Output Level before 1% Distortion: 20 dBu ± 2 dBu
Partyline Output
Off Noise: < -74 dBu
Output Impedance: >10 KΩ
Partyline Input
Crosstalk: < -60 dB
Max level before Clipping: >= 12 dBu
Side tone Null Capability: > 25 dB
Stage Announce/Balanced Line Out
Type: Balanced
Output Impedance: >= 200Ω
Load Impedance: >= 600Ω
IFB/Hot Mic
Type: Unbalanced
Output Impedance: 180Ω
Load Impedance: >= 600Ω
Frequency Response
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
36
Panel Mic - Partyline: 600 - 10KHz ± 3dB
Headset Mic - Partyline: 200 - 12KHz ± 3 dB
Headset Mic - Line Out: 200 - 12KHz ± 3 dB
Program Input - Partyline: 100 17KHz ± 3 dB
Program Input - Headset Out: 200 - 10KHz ± 3 dB
Program Input - Speaker Out: 300 - 10KHz ± 3 dB
Partyline - Headset Out: 200 - 10KHz ± 3 dB
Partyline - Speaker Out: 300 - 10KHz ± 3 dB
Max Distortion
Panel Mic - Partyline: <= 0.5%
Headset Mic - Partyline: <= 0.5%
Headset Mic - Line Out: <= 0.5%
Program Input - Partyline: <= 0.2%
Program Input - Headset Out: <= 0.2%
Program Input - Speaker Out: <= 0.5%
Partyline - Headset Out: <= 0.2%
Partyline - Speaker Out: <= 0.5%
Noise
Panel Mic - Partyline: < -65 dBu
Headset Mic - Partyline: < -70 dBu
Headset Mic - Line Out: < -55 dBu
Program Input - Partyline: < -85 dBu
Program Input - Headset Out: < -60 dBu
Program Input - Speaker Out: < -60 dBu
Partyline - Headset Out: < -50 dBu
Partyline - Speaker Out: < -50 dBu
Max Gain
Panel Mic - Partyline: >= 37 dB
Headset Mic - Partyline: 41 dB ± 2 dB
Headset Mic - Hot Mic Out: 55 dB ± 3 dB
Headset Mic - Announce Out: 55 dB ± 3 dB
Program Input - Partyline: >= -16 dB
Program Input - Headset Out: >= 18 dB
Program Input - Speaker Out: >= 24 dB
Partyline - Headset Out: >= 34 dB
Partyline - Speaker Out: >= 40 dB
Min Gain
Panel Mic - Partyline: <= 25 dB
Mains Power
Input Voltage Range: 100 - 240 VAC
Input Frequency Range: 50 - 60 Hz
Input Power: <= 60 VAC
Output Voltage : 30 VDC ± 0.5V
Output Current per Channel (Continuous): 1.2 A
Output Current per Channel (Peak): 2 A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
Short Circuit Recovery
Time (1st short): <= 0.5 sec
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
37
Short Circuit Recovery Time >= 20 shorts in 20sec: <= 20 sec
Station Capacity
Up to 40 RS-601 belt packs or 10 speaker stations or 12 headset stations
distributed over both channels
Rear Panel Connectors
Intercom: (6) XLR-3M (3 per channel)
Announce Out: (1) XLR-3M (audio)
Announce Relay: (1) 1/4 in. (0.64 cm) phone jack (relay)
Program: (1) XLR-3F
Hot Mic / IFB Interface: (1) 1/4 in. (0.64 cm) phone jack
AC Power: IEC 320 connector
Rear Panel Controls
(2) Termination On-Off switches
(8) Option switches
(1) Power switch
(1) Tone alert volume control
Front Panel Connectors
Panel Mic: (1) 1/4 in. (0.64 cm) panel mounting jack
Headset: (1) XLR-4M
Front Panel Controls & Indicators
(1) Panel / headset mic switch
(1) Announce button
(1) Partyline link button
(2) Program ON-OFF-INTERRUPT switches
(3) Program level controls
(2) Listen controls
(2) Side tone null controls
(2) Talk buttons
(2) Call buttons
(1) Tone alert button
(1) RMK button
(1) Speaker ON-OFF switch
(2) Short LEDs
Environmental
32 - 122˚F (0 - 50˚C)
Dimensions
19 in. W x 1.75 in. H x 6.5 in. D
(483 mm x 44 mm x 165 mm)
Weight
6.06 lbs. (2.75 kg)
ADDITIONAL COMPONENTS NEEDED:
• Clear-Com CC-GM18 18” Gooseneck Microphone
o Quantity: 2
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
38
• Telex TW-5W 1 In, 5 Out Splitter Box
o Quantity: 3
b. Wireless Specs
DUAL-SIDED HEADSET WITH FELXIBLE DYNAMIC BOOM MIC
RTS HR-2 Dual-Sided Headset
Quantity: 4
FEATURES
The wireless headset is a dual-sided, medium-weight passive noise reduction headset
with a dynamic noise cancelling microphone. The headset has a noise reduction rating
of 21dB; suitable for use in a moderately noisy environment. The features are unique,
soft moleskin covered headband for all day comfort. Our ergonomic headset design
distributes ear cushion pressure evenly over the entire ear with no pressure points
unlike conventional headsets, which apply more pressure on the bottom of the ear than
the top.
An added advantage of this headset is that it folds into compact form for ease of
transport and storage.
Color Black
Connector A4F, A5F, A4M, A5M, or pigtail termination
Cord Length 5ft (1.524m)
Frequency Response 100 Hz – 3 kHz
Impedance 150
Microphone Frequency Response 150 Hz - 8kHz
Microphone Impedance 200
Microphone Sensitivity -65 dBV/Pa @1cm
Microphone Type Dynamic Noise-Cancelling
Noise Reduction 21 dB
Sides Dual-sided
Speaker Sensitivity 95dB SPL/mW @1kHz
Weight 15 oz. (425.24 g)
SIGNAL-SIDED HEADSET WITH FELXIBLE DYNAMIC BOOM MIC
RTS HR-1 Single-Sided Headset
Quantity: 6
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
FEATURES
The headset is single-sided, medium-weight passive reduction headset with dynamic
noise-canceling microphones. The headset has noise reduction rating of 21dB; suitable
for use in a moderately noisy environment. The ergonomic moleskin-covered headband
design distributes the ear cushion pressure evenly over the entire ear with no pressure
pints, ensuring hours of comfortable wear. An added advantage of this headset design
is that it folds into compact form for ease of transport and storage.
Color Black
Connector A4F, A5F, A4M, A5M, or pigtail termination
Cord Length 5ft (1.524m)
Frequency Response 100 Hz – 3 kHz
Impedance 150
Microphone Frequency Response 150 Hz - 8kHz
Microphone Impedance 200
Microphone Sensitivity -65 dBV/Pa @1cm
Microphone Type Dynamic Noise-Cancelling
Sides Single-sided
Speaker Sensitivity 95dB SPL/mW @1kHz
Weight 11 oz. (311.84 g)
c. UHF 2-Audio Channel Wireless Synthesized Base Station
Telex BTR-800 2 Channel UHF Base Station
Quantity: 1
The 2-audio channel synthesized wireless intercom system offers the ultimate in
reliable, high performance high fidelity full duplex communications. The system includes
a frequency-agile base station, working with up to four agile belt packs. The base
station provides full-duplex communications with belt packs.
The system incorporates two (2) audio channel operation, permitting the belt pack
operator to choose between two (2) separate audio channels of communication, with
the base station tracking the belt pack selection. This allows the user the flexibility to
create a party line and a private line within the same belt pack.
39 CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
40
The system is perfectly suited for standalone operation and
can interface with digital matrix intercom systems and 4-
wire communications systems. In addition to the external
intercom system. The system provides connections for auxiliary balanced audio input
and output, as well as WTA (wireless talk-around) and SA (stage announcements)
features.
The clear-com system has been designed for reliable, efficient operation. Operating in
the UHF range, the units operate reliably at the line-of-sight distances of 1000 ft. With
available antenna systems, the effective operating range can be extended. The highly-
efficiency belt packs provide up to 12 hours of uninterrupted operation using standard
alkaline batteries.
FEATURES
• Frequency-agile base station & belt packs
• Backlit base station LCD
• ClearScan function
• Full-duplex operation
• Compatible other wired intercom types
• Two (2) channels of intercom audio
• WTA (wireless talk-around)
• SA (stage announcements) belt pack control. Relay contact closure on the base
when the SA button is pressed
• Two (2) audio binaural operation in either stereo or mono
• Belt packs units contained in a weather and shock resistant diecast magnesium
case
• Convenient IEC power connector on the base station
• base station comes with rack ears for easy mounting
SPECIFICATIONS
RF Frequency Range 470-608MHz, 614-698MHz
(614-722MHz, Europe)
in 18MHz TX and RX bands
Power Requirements 100-240VAC, 50-60Hz
IEC receptacle
Temperature Range -4F to 130F (-20C to 55C)
TX Antenna ½ wave (supplied), TNC Male Connector
RX Antenna ½ wave (supplied) TNC Male Connector
Frequency Response 300Hz-8kHz
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
41
4-Wire Input and Output Level Adjustable
(2VRMS typical)
Telex Intercom Input/output
Level Adjustable
(1VRMS typical), Line
Line Impedance 300
RTS Intercom Input/output Level Adjustable
(0.775VRMS typical)
Impedance 200
Clear-Com Intercom Input/output Level Adjustable
(1VRMS typical)
Line Impedance 200
Auxiliary Input Adjustable (2VRMS typical)
Auxiliary Output Adjustable (2VRMS typical into 600)
Stage Announce Output Internally adjustable
(2VRMS typical at rated deviation into 600)
Stage Announce Relay Dry contact, rated at 1 Amp, 24Vmax
Microphone Input Sensitivity 9mV
Local Headset Output 40mW output into 600 (1% distortion)
Transmitter Type 2 Synthesized Transmitters, 712 Channels each
Transmit Power (each transmitter) 100mW Max. (High) 10mW (Normal)
Modulation Type FM
Deviation 40kHz (35kHz Europe)
RF Frequency Stability 0.005%
Modulation Limiter Peak-Responding Compressor
Radiated Harmonic & Spurious Complies with FFC specifications
Receiver Type Dual Conversion Superheterodyne
Four (4) independent Synthesized IF’s
FM, 712 channels each
RF Sensitivity 0.8V for 12dB SINAD
Squelch Threshold 20dB SINAD
IF Selectivity 3dB at 230kHz
Image Rejection 70dB or better
Squelch Quieting 90dB
RF Frequency Stability 0.005%
Distortion 1% at full deviation
Product Dimension 19” W x 1.7” H x 14” D
(48.3cm x 4.4CM x 35.6cm)
7lbs, 2 oz. (3,24kg)
ADDITIONAL COMPONENTS NEEDED:
• RTS ALP-600 UHF Antenna (or equivalent)
o Quantity: 1
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
42
• 25’ 50 BNC Cables
o Quantity: 4
• Full Height Mic Stand with Boom Attachment
o Quantity: 1
d. UHF 2-Audio Channel Wireless Synthesized Transceiver
Telex TR-800 2-Channel UHF Transceiver
Quantity: 4
The UHF 2-Audio channel wireless synthesized transceiver is a dual-listen belt pack,
allowing you to listen to tech on one ear and production in the other ear. Individual
volume controls also allow for easy level adjustment. The units are built with metal cast
magnesium case, and LCD-based user interface, stage announce activation, WTA
(wireless walk around), enhanced Clear-scan, detachable antennas and an auto
sensing headset connector that automatically switches between electret and dynamic
headset mics.
FEATURES
• On/Off & Volume Control – turns the belt pack power on and controls headset
volume.
• Wireless Talk Around (WTA) – When pressed, the user’s audio is disconnected
from the wired intercom, auxiliary input/output and the base station’s local
headset. Other belt pack users, on that audio channel, can hear the user as
normal.
• Stage Announce – When pressed, the user’s audio is routed to the SA (stage
announce) connector on the back of the base station. The user also loses their
side-tone as an indication that stage announce is activated. The other wireless
belt packs and wired users do not hear the user’s audio. The button is non-
latching and activates the nearby red LED.
• Audio Channel Select Button – Allows user to select either audio channel A or B.
• Bat/Overmod Light (BAT/OM) – Light flashes once when unit is turned on if the
battery is good. If the light stays on, battery is low. If the light does not flash,
battery is dead. A normal microphone gain setting causes the LED to flash at the
beginning of most words at normal speech levels. If the gain is too high, the LED
is red during the complete word at normal speech levels.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
43
• Talk Light – LED is on when the talk button, SA or
WTA is active.
• Talk Button – The talk LED, turns red when enabled.
A quick press and release latches the talk function, unless latching has been
disabled. Holding the button for over a half second causes the audio path to be
enabled only for as long as the button is held. If the talk function is latched on,
pressing the talk button again turns it off.
SPECIFICATIONS
RF Frequency Range 470-608MHz, 614-698MHz
(614-722MHz, Europe) in 18MHz
TX and RX bands
in 18MHz TX and RX bands
Power Requirements 6 AA Cells Alkaline (NiMH optional)
Unit Draw 140A (push-to-talk, talk on)
Temperature Range -4F to 130F (-20C to 55C)
TX Antenna ¼ wave (supplied), Screw type, replaceable
RX Antenna ¼ wave (supplied), Screw type, replaceable
Frequency Response 300Hz-8kHz
Microphone Input Sensitivity 7mV
Local Headset Output 40mW output into 600 (1% distortion)
Transmitter Type Synthesized, 712 Channels
Transmit Power 50mW max. (auto-power reduction)
Modulation Type FM
Deviation 40kHz (35kHz Europe)
RF Frequency Stability 0.005%
Modulation Limiter Peak-Responding Compressor
Radiated Harmonic & Spurious Complies with FFC specifications
Receiver Type Dual Conversion Super heterodyne
RF Sensitivity 0.7V for 12dB SINAD
Squelch Threshold 20dB SINAD (about 1.0V)
Image Rejection 70dB or better
Squelch Quieting 90dB
RF Frequency Stability 0.005%
Distortion 1% at full deviation
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
44
Product Dimension 7” W x 4” H x
14” D
(17.78cm x
10.16com x 35.56cm)
16oz (454g) with alkaline batteries
5. CUSTOM REMOTE CASE SYSTEM
A. Fly Pack Design Case
Note: adequate cooling fan for the case design.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
45
B. Fly Pack Accessory case
This case must be self-supporting and include heavy duty
casters. It must also include drawers for each PTZ camera to be placed in for storage
and transportation and intercom components such as belt packs and headsets. There
must also be another drawer for adapters and other video support related items. The
case must also allot enough space tripods and spreaders.
All cable reels must be placed in the bottom of the structure.
The case must also include Edison extension cables to connect the pack to a 110v
power source.
This case must be able to fit through a standard door frame.
C. Tripod Cases
Camgear SP-2 Soft Bag
Quantity: 3
The Tripod Soft Bag is made for multiple systems. It is made from ballistic nylon
and has a zippered closure. A padded interior helps to protect the tripod, and two
grab handles allow you to easily carry the bag.
D. Utility Support
Cable reels will need to be used to manage camera support cable for the system. These
reels will need to be placed in the utility support case.
E. Other Rackmount Items
Middle Atlantic LBX-4 4RU Drawer
Quantity: 1
FEATURES
• 9” deep secure key locked storage
• Sturdy steel construction
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
46
Middle Atlantic UQFP-4RT Ultra Quiet Fan
Panel Quantity: 4
FEATURES
• Economical cooling panel rated 100 CFM at 27 dB
• Intelligent thermostatic proportional control
• Front panel mounted switch
• 110 input voltage
• 2 RU
2 stereo direct boxes are required for the audio system.
6. CABLE MANGEMENT
A. Specialty Cables
200’ runs of cable that will be placed on the reels. Cable specs are as follows:
o 2 x CAT 6 STP 200’ runs, 2 x 200’ run High Res HD SDI Cable
o Cable must be bound by Tec Flex material or molded. Cannot be zipped tied.
o Redundant 2-50’ and 200’ runs of the same cable
Other cables required:
o 2 x 100’ XLR Cables
o 10 x 25’ XLR Cables
o 2 x 50’ Edison 10-3 Extension Cables
o 2 x ETS-PA202F and ETS-PA202M Passive Snakes
o 2 x CAT 6 STP Ethercon 100’ runs for passive snakes.
TRS connections are required where necessary for optimal operation of the system.
7. POWER MANAGEMENT
A. Power Distro
Furman M-8Dx Power Conditioner
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
47
Quantity: 5
FEATURES
Maximum Output
15 Amps
Line Cord
6 ft., 14 AWG, with 3-conductor Edison plug
Operating Voltage
120VAC 60Hz
Lamps
Two 120V incandescent bulbs, 4 watts each
Spike Protection Mode
Line to Neutral
Energy Dissipation
170 joules
Peak Impulse Current
12,000 amps
Maximum Continuous Operating Voltage
130 VAC RMS
Let Through Voltage
(@125 amps, 8/20uS waveform, 400 volts)
Noise Attenuation
Transvers mode: Greater than 23dB, 200Khz to 10 MHz
Dimensions
1.75”H x 19” W x 7.5” D
Weight
5.8 lbs.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
48
B. UPS Backup
CyberPower OR1500LCDRTXL2U UPS
Quantity: 2
LCD Readout
The multifunction LCD readout provides ready access to power/battery condition vitals
such as runtime, load, temperature, and much more.
Circuit Breaker Reset Buttons
Provides quick recovery form an overload
2 Serial Ports
Access Power Panel software to view and configure connected equipment
Outlets
8 Battery Powered and Surge Protected Outlets
Provides continuous battery backup power when power is interrupted
Output Capacity
1500VA / 1125 Watts
Output Voltage
120Vac (on Battery)
Automatic Voltage Regulator (AVR)
Yes
Frequency Range
47Hz – 63Hz
Waveform Type
Simulated Sine Wave
Surge Protection
1,840 joules
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
49
Battery Recharge Time
8 hours from total discharge
Battery Life
3 to 6 years
Software
Power Panel
Interface
2 Serial Ports / USB Adapter
Dimension
2U, 17” x 3.5” x 18.8”
Weight
59.5 lbs
8. ENGINEERING
A. Networking
Ubiquiti Edge Switch 24 Lite
Quantity: 1
The EdgeSwitch ES-24-LITE is a 24-Port Gigabit switch. The EdgeSwitch offers an
extensive suite of advanced Layer-2 switching features and protocols, and also provides
layer-3 routing capabilities.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
50
CONNECTORS
RJ45 Ports
24 x Gigabit
SFP Ports
2 x 1G
Console Port
1 x RJ45 Serial
FEATURES
Non-Blocking Throughput
26 Gbps
Switching Capacity
52 Gbps
Forwarding Rate
38.69 Mpbs
Maximum Power Consumption
25W
B. I/O Panels
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
51 CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
52
C. Sub I/O Panels
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
53
D. Intercom
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
54
E. Video Diagram
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
55
F. Audio Diagram
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
56
G. External Dimension of Switcher
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.
57
H. Flypack Case Model
I. Assembly
Professional assembly of the kit is required for proper operation. Cables
will need to be made to the custom lengths necessary and cable
management will need to be completed before delivery.
CONFIDENTIAL DESIGN INFORMATION - Unauthorized use, reproduction or dissemination of this document is strictly prohibited.