Mobile Crane Operator Certification - Master Builders of · PDF fileNCCCO Mobile Crane Operator Certification will assure ... *These documents will be sent to the ... Manufacturers’

Mobile Crane Operator CertificationHydraulic Fixed & Swing Cab

OCTOBER 19 - 23, 2015

BROUGHT TO YOU BY MASTER BUILDERS OF IOWA

MASTER BUILDERS OF IOWA221 Park St.PO Box 695

Des Moines, IA 50306Phone: (515) 288-8904

Fax: (515) [email protected]

www.facebook.com/masterbuildersofiowa@MBIsince1912

MBI has contracted with Associated Training Services (ATS), Terex Cranes and the National Commission of the Certification of Crane Operators (NCCCO) to provide this premier crane operator course in Iowa. Attendees of this course will be prepared for and tested on the written and practical exams for certification through NCCCO. The NCCCO crane operator certification is one of the most widely recognized crane operator certifications in the crane and lifting industry. The Mobile Crane Operator Certification exams are designed for operators who are trained and who currently work in crane operation. All candidates are required to pass both written and practical examinations to be certified. The initial certification period is for 5 years, after which an operator is required to recertify. Successful completion of this course and meeting the requirements for NCCCO Mobile Crane Operator Certification will assure the crane operator and his/her employer meet the OSHA certification deadline of November 10, 2017.

SAFETY

15

Requirements for NCCCO Mobile Crane Operator Certification• Be at least 18 years of age • Meet Medical Requirements* • Comply with NCCCO’s Substance Abuse Policy*• Pass Written Examinations (Core and at least one Specialty) • Pass Practical Examination(s)

Candidates have 12 months to successfully complete the exams after passing the first examination. If not completed within that time frame, the certification testing must start over.

• Comply with the NCCCO Code of Ethics**These documents will be sent to the participant immediately following registration in the course.

The Mobile Crane Operator Written Examinations consist of a Core Examination in crane operation and up to four crane Specialty Examinations. Certification requires competency in both the Core and one or more Specialty designation(s). The Core Examination has 90 multiple-choice questions. Candidates are allowed 90 minutes to complete the Core Examination. Each Specialty Examinations consists of 26 multiple-choice questions. Candidates are allowed 60 minutes to complete each Specialty Examination.

All candidates are required to take the Core Examination, regardless of the Specialty(s) in which they wish to be certified. The Core Examination portion of the NCCCO certification program tests the following knowledge areas relating to the operation of mobile cranes:• Domain 1: Site (Approx. 20% of the test)• Domain 2: Operations (Approx. 26% of

the test)• Domain 3: Technical Knowledge (Approx.

28% of the test)• Domain 4: Manufacturers’ Load Charts

(Approx. 26% of the test)

The Mobile Crane Operator practical examinations demonstrate crane operation proficiency and are available in two

crane types:• Telescopic Boom Cranes—Swing Cab • Telescopic Boom Cranes—Fixed Cab

Candidates must pass written exams (Core + Specialty) and a practical exam in the designation(s) for which they seek certification.Candidates have 12 months after they pass their first exam (written or practical) to pass the corresponding written or practical exam(s) in the same designation(s).

All operators with Telescopic Boom—Fixed Cab (TSS) certification also receive the Boom Truck—Fixed Cab (BTF) and Service Truck Crane (STC) certification designations because Boom Trucks and Service Truck Cranes are subcategories of Telescopic Boom—Fixed Cab Cranes.

The Master Builder designation program will offer the following credit hours for completion of this course. For more information on becoming a ‘Master Builder’, please visit MBI’s website at www.mbionline.com/master-builder-designation.

MOBILE CRANE OPERATOR CERTIFICATION

For questions or additional information, please contact Tom Fulcher at (515) 657-4395 or [email protected].

MONDAY, OCTOBER 19TH

Orientation

NCCCO Core Exam Prep

TUESDAY, OCTOBER 20TH

Fixed Cab Load Charts

Swing Cab Load Charts

WEDNESDAY, OCTOBER 21ST

Practical Exam Orientation

NCCCO Practical Exams / Practice

THURSDAY, OCTOBER 22ND

Practical Exam Orientation

NCCCO Practical Exams / Practice

FRIDAY, OCTOBER 23RD

Exam Prep Review

Written Exams

SCHEDULE

OCTOBER 19 - 23, 2015 8:00 am - 5:00 pm

Terex Cranes106 12th Street SE

Waverly, IA 50677

MUST ATTENDEVENT

NATIONAL COMMISSION FOR CERTIFICATION OF CRANE OPERATORSThe National Commission for the Certification of Crane Operators (NCCCO) is an independent, nonprofit organization formed in 1995 to set standards for fairly measuring the knowledge and proficiency required for the safe operation of cranes. NCCCO currently administers a nationwide program of certifications for crane operators and related trades. By providing thorough, independent assessments of knowledge and skills, NCCCO aims to enhance lifting equipment safety, reduce workplace risk, improve performance records, stimulate training, and give due recognition to the professionals who work in, with, and around cranes.

MOBILE CRANE OPERATOR WRITTEN EXAMINATIONS

MOBILE CRANE OPERATOR PRACTICAL EXAMINATIONS

CERTIFICATION TIME FRAMES

Master Builders of Iowa would like to thank Terex for

their continued support of the MBI Mobile Crane Operator

Certification training program. Without the generous

contribution of equipment and training space from Terex, this

program would not be possible!

DAN SWIGGUM Associated Training Services Sun Prairie, Wisconsin

Dan is the Chief Crane Instructor at Associated Training Services (ATS) in Sun Prairie, WI, which is the oldest family-owned training center for CDL drivers, heavy equipment operators, crane operators, and rigging and signal persons. Dan is an NCCCO certified crane operator and has been a NCCCO Practical Examiner since 2008. Dan is also a certified Craft Instructor through the National Center for Construction Education and Research (NCCER).

INSTRUCTOR

SPACE IS VERY LIMITED

REGISTER TODAY!