Top Banner
Indian Institute of Technology Hyderabad MOBILE BUG 0 By: M. Pavan kumar(cs12b1025) P.V.Sairam(me12b1027) B.Naveen reddy(me12b1007) Siva Krishna(cs12b1038)
10

MOBILE BUG

Feb 09, 2016

Download

Documents

t_amas

MOBILE BUG. By: M. Pavan kumar (cs12b1025) P.V.Sairam (me12b1027) B.Naveen reddy (me12b1007) Siva Krishna(cs12b1038 ). 0. CONTENTS. INTRODUCTION CIRCUIT DIAGRAM PIN CONFIGURATION OF 1) IC CA3130 PIN CONFIGURATION OF 2) IC2 NE555 WORKING APPLICATIONS LIMITATIONS - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: MOBILE BUG

Indian Institute of TechnologyHyderabad

MOBILE BUG

0

By: M. Pavan kumar(cs12b1025) P.V.Sairam(me12b1027) B.Naveen reddy(me12b1007) Siva Krishna(cs12b1038)

Page 2: MOBILE BUG

CONTENTS INTRODUCTION CIRCUIT DIAGRAM PIN CONFIGURATION OF 1) IC CA3130 PIN CONFIGURATION OF 2) IC2 NE555 WORKING APPLICATIONS LIMITATIONSREFERENCES

Page 3: MOBILE BUG

INTRODUCTIONAIM:TO CONSTRUCT A CIRCUIT WHICH GIVES WARNING INDICATION IF MOBILE PHONE IS USED IN CONFIDENTIAL AREAS

WHAT IS AN ORDINARY LC CIRCUIT ?

WHY ORDINARY LC CIRCUIT DOESNOT SUIT FOR CELL PHONE DETECTOR CIRCUIT ?

WHAT IS THE BASIS FOR THIS CIRCUIT ?

Page 4: MOBILE BUG

CIRCUIT DIAGRAM

Page 5: MOBILE BUG

PIN CONFIGURATION OF (1) IC CA 3130

Page 6: MOBILE BUG

PIN CONFIGURATION OF (2) IC NE 555 TIMER

Page 7: MOBILE BUG

WORKING0.22µF Disk capacitor(C3) along with the leads acts as a small antenna

to collect the RF signals from the mobile phone

This capacitor creates a field, stores energy and transfers the stored energy in the form of minute current to the inputs of IC CA3130

Op-amp IC CA3130 converts the current to corresponding voltage output

Capacitor C4 and resistor R1 keeps the non-inverting input (3) stable

Resistor R2 provides the discharge path for capacitor C4

Page 8: MOBILE BUG

Resistor R3 acts as a feed back resistor

C5 is connected for phase compensation

Depending on the signal frequency detected by the C3,output of the IC1 becomes high and low alternatively, indicated by LED1 and beeping of buzzer

Mono-stable timer IC2 is triggered through capacitor C7

Capacitor C6 maintains the base bias of transistor T1

R6 and C9 reduce time delay

Page 9: MOBILE BUG

APPLICATIONS It can be used to prevent the use of mobile phone in Examination halls,

confidential rooms etc. It is also useful for detecting the use of mobile phone for spying and

unauthorized video transmission.Range of the detector also plays a important role: EXAMPLE will be explained It can detect the information receiving mobile phone even if it is in silent mode.

Page 10: MOBILE BUG

LIMITATION RANGE OF CIRCUIT The prototype has only limited range of two metres.Exact location of mobile phone cannot be detected

REFERENCES www.google.com

www.googleimages.com

www.pdfmachine.com

www.Wikipedia.com