-
Industrial Connection Systems, Marking and Mounting Material
Clipline
Industrial Plug Connectors
plusCon
PCB Connection Systems and Electronic Housings
CombiCon
Surge Protection
TrabTeCh
Signal Converters, Switching Devices and Power Supplies
inTerfaCe
Components and Systems
auTomaTion
PHOENIX CONTACT GmbH & Co. KG32823 Blomberg, GermanyPhone:
+49/52 35/3-00Fax: +49/52 35/3-1 07 99www.phoenixcontact.com
Further information on the products introduced here and on the
world of solutions from Phoenix Contact can be found at
www.phoenixcontact.com
or contact us directly!
MN
R 5
2004
103/
15.0
4.20
08-0
0
P
rint
ed in
Ger
man
y
©
PH
OEN
IX C
ON
TAC
T 2
008
power supply unitsFor superior system availability
-
2 PHOENIX CONTACT
News –The latest technology in every class
The performance and reliability of a power
supply is critical to the operation of today´s
complex control systems. Phoenix Contact
power supplies are designed to meet and
exceed the demands of modern control
systems in order to ensure optimum
system performance.
Worldwide use due to wide-range input •
and international approvals
High system reliability due to long mains •
failure bridging times with full load and
high MTBF > 500.000 h
To connect in parallel to •
increase power or achieve
redundancy
Simplified startup with •
LED-signaling
sTep poWerThe new device series is ideal for installation in
distributor boards and lowprofile control panels. Now available
with double power density and high energy efficiency with ten
devices offered in four different pitches.
QuinT poWerThese highly functional devices are equipped with
Power Boost, preventive function monitoring and Selective
Fusebreaking Technology (SFB) and are now available in 12 and 48
VDC versions as well.
Trio poWer TRIO POWER is used in series applications. The new 24
V / 5 A is a flexible device that can be operated with two and
three-phase mains connection. New areas of application open up with
12 and 48 VDC output voltages.
mini poWer Used in distributed automation, this power supply
unit with an integrated UPS provides a buffer time of up to 45
minutes. It also features extensive signaling and optimized battery
management.
-
PHOENIX CONTACT 54 PHOENIX CONTACT
Compact power supply units of the new
QUINT POWER generation maximize
system availability. Even standard power
circuit-breakers can be triggered quickly
and reliably with SFB technology (Selective
Fusebreaking Technology) with six times
the nominal current for 12 ms. Defective
current paths are selectively disconnected,
the defect is limited and the important
system parts remain in operation.
A comprehensive diagnosis is made by
continuously monitoring the output voltage
and current. This preventive function
monitoring visualizes the critical operating
modes and reports them to the control
unit before an error occurs.
QUINT POWER guarantees superior
system availability.
QUINT POWER power supply units – Superior system availability
with SFB technology
efficiently selective protection with sfb technology
In order to be able to trigger standard power circuit-breakers
magnetically and quickly, power supply units must be able to supply
a multiple of the nominal current for a short period. With the SFB
technology (Selective Fusebreaking Technology), six times the
nominal current for 12 ms, this current reserve is always
available.
Worn display cable: The fuse triggers; the lower level display
is dark. The control unit and the sensor and actuator systems
continue to operate without any interruption. The production
continues.
-
6 PHOENIX CONTACT PHOENIX CONTACT 7
QUINT POWER power supply units offer
functional advantages in an especially slim
design. The unique SFB technology and the
extended preventive function monitoring
increase application availability.
QUINT POWER power supply units – For superior system
availability
Compensation of voltage dips
preventive function monitoring
Reports the critical operating states before any error occurs by
continuously monitoring the output voltage and current
Remote monitoring using active switching outputs and floating
relay contacts
service-friendly connection technology
COMBICON connectors (up to and including 10 A)
reliable starting of heavy loads
static power reserve POWER BOOST contiuous with up to 1.5 times
the nominal current
Slim design
saves up to 50% space in the control cabinet
rugged design
Metal housing and wide temperature range of -25 to +70°C
Third minus terminal as grounding terminal block
minimize the installation costs
Quick triggering of the commercial power circuit-breakers
Dynamic power reserve SFB technology (Selective Fusebreaking
Technology) with six times the nominal current for 12 ms
Output voltage can be set on the front side
A voltage range of 5 ... 60 V DC is covered with three power
supply units with output voltages of 12, 24 and 48 V DC
Worldwide use due to wide-range input and international
approvals
high operational reliability due to high MTBF > 500.000 h and
long mains buffering times > 20 ms, high voltage resistance of
single-phase devices up to 300 V AC
To connect in parallel to increase power and achieve
redundancy
semi f47-200 meets the requirements of the semiconductor
industry as regards mains voltage dips
Three-phase devices proper operation even when a phase
permanently fails, high surge voltage strength up to 6 kV using
integrated gas arrester
-
8 PHOENIX CONTACT PHOENIX CONTACT 9
TRIO POWER combines basic functionality
with high quality and reliability. This makes
them ideal for use in series applications.
TRIO POWER power supply units – Basic functionality at the
highest level
A new developed ASIC, enables maximum energy efficiency and
uniquely low power dissipation in idling mode
saving energy
High MTBF >500000 h
U/I characteristic curve for the supply of capacitive loads
reliable supply
Wide temperature range from -25 to +70°C
outdoor installation
For installation distributors and flat
operatorl panels, STEP POWER, the new
family of power supply units, is the ideal
choice. The low power dissipation in idling
mode and high degree of efficiency make
for maximum power efficiency in their
class.
STEP POWER power supply units – Specially designed for building
automation
Metal housing and wide temperature range of -25 to +70°C
rugged design
high operational reliability
High MTBF >500000 h
High voltage resistance of single-phase devices up to 300 V
AC
Third minus terminal serves as g rounding terminal block
minimize the installation costs
Output voltage can be set on the front side
Compensation of voltage dips
Snap onto the DIN rail or direct panel mounting
easy to mount
-
Uninterruptible power supply units (UPS)
provide power even if the mains fails.
An uninterruptible solution consists of
three functional units.
Uniterruptible power supply units – The ideal solution at a
glance
select the desired buffer time as well as the required load
current. The color code gives you the ideal solution.
20 A shall be buffered for 10 min. The color code “orange”
indicates the solution of the electronic switchover unit
QUINT-DC-UPS/24DC/20A in combination with the energy storage
QUINT-BAT/24DC/7.2AH. An additional power supply unit is
required.
example
Power supply unit Electronic switchover unit
Energy storage
flexible• : QUINT DC-UPS 20 or 40 A in combination with 3.4, 7.2
or 12 Ah, modular combination of electronic switchover unit and
energy storage
retrofitting made easy:• QUINT DC-UPS 10 A, electronic
switchover unit with integrated battery as energy storage
space-saving:• MINI DC-UPS, com-bines power supply unit and
electronic switchover unit in the same housing
maintenance-free: • Buffer module, energy storage
capacitor-based for short-term failures
0.2 0.5 1 4 2 3 5 6 7 8 9 10 20 30 45 1 2 3
1 A
2 A
3 A
5 A 1+1
7 A 1+1
10 A 1+1
15 A 1+1 1+1
20 A 1+1 1+1
25 A 1+1 1+1
30 A 1+1 1+1
35 A 1+1
40 A 1+1
1+1= In this case, two battery modules of the same capacity are
required
Seconds Minutes Hours Buffer time/ Load current
input: 22,5 to 30 V DC output: 24 V DC (Uin -0,5 V) buffer mode:
27,9–19,2 V DC
24 V / 20 A 24 V / 10 A 24 V / 20 A 24 V / 20 A
QUINT-BUFFER/24DC/20 28 66 21 3
QUINT-DC-UPS/24DC/10 28 66 22 6
QUINT-DC-UPS/24DC/20 28 66 23 9
QUINT-DC-UPS/24DC/20 28 66 23 9
maintenance-free capacitor-based
power buffer
With integrated 1.3 ah battery module
QUINT-BAT/24DC/3.4AH 28 66 34 9
QUINT-BAT/24DC/7.2AH 28 66 35 2
QuinT ups / QuinT baT
125
130
123
156
16466
123
145
125
130
66 112
125
130
100
125
130
64
F U u c
input: 1-phase, 85 to 264 V AC, 100 to 350 V DC output: 24 V DC
(Uin -0,5 V) buffer mode: 27,9–19,2 V DC
24 V / 2 A 24 V / 2 A
MINI-DC-UPS/24DC/2 28 66 64 0
MINI-DC-UPS/24DC/2 28 66 64 0
MINI-BAT/24DC/0.8AH 28 66 66 6
MINI-BAT/24DC/1.3AH 28 66 41 7
mini ups / mini baT
107
99
67,5
107
99
67,5
110
130
52
107
99
67,5
input: 22,5 to 30 V DC output: 24 V DC (Uin -0,5 V) buffer mode:
27,9–19,2 V DC
24 V / 20 A 24 V / 25 A 24 V / 40 A 24 V / 40 A
QUINT-DC-UPS/24DC/20 28 66 23 9
QUINT-DC-UPS/24DC/40 28 66 24 2
QUINT-DC-UPS/24DC/40 28 66 24 2
QUINT-DC-UPS/24DC/40 28 66 24 2
QUINT-BAT/24DC/12AH 28 66 36 5
QUINT-BAT/24DC/3.4AH 28 66 34 9
QUINT-BAT/24DC/7.2AH 28 66 35 2
QUINT-BAT/24DC/12AH 28 66 36 5
QuinT ups / QuinT baT
123
156
125
130
125
130
123
145
125
130
23166
123
156
1646611266
123
156
125
23166
F U u c
130
~ + –
~ + –~ + – ~ + – ~ + – ~ + –~ + –
~ + –~ + – ~ + –~ + – ~ + –~ + – ~ + –~ + –
~ + – ~ + – ~ + –
u c
-
PHOENIX CONTACT 1512 PHOENIX CONTACT
3 3 3 3Worldwide use due to wide-range input and international
approval package
3 3 3 3high operational reliability thanks to high MTBF >
500.000 h
3 3 3 3 To connect in parallel to increase power or achieve
redundancy
3 3 3 3simplified startup with LED-signaling
3 3 3 3 outdoor installation possible thanks to wide temperature
range
3 3 3Compensation of voltage dips and recharging of batteries
based ondefinable output voltage
3 3 3high operational reliability withlong mains failure
bridging times > 20 ms
3 3optimum device connection with COMBICON plug connectors(up to
and including 10 A)
3 3active function monitoring via switching output for remote
diagnostics
3 3reliable starting of heavy loads with power reserve POWER
BOOST
3 3proper operation of three-phase devices even withpermanent
failure of one phase
3function monitoring via floating relay contact for remote
diagnostics
QU
INT
POW
ER
TRI
O P
OW
ER
M
INI P
OW
ER
STE
P PO
WER
Trio poWer 1˜ u c Trio poWer 3˜ u cinput: 1-phase, 85 to 264 V
AC
24 V / 2,5 A 24 V / 5 A 24 V / 10 A 24 V / 20 A
TRIO-PS/1AC/24DC/2.5 28 66 26 8
TRIO-PS/1AC/24DC/5 28 66 31 0
TRIO-PS/1AC/24DC/10 28 66 32 3
TRIO-PS/1AC/24DC/20 28 66 38 1
12 V / 5 A 12 V / 10 A 48 V / 5 A 48 V / 10 A
TRIO-PS/1AC/12DC/5 28 66 47 5
TRIO-PS/1AC/12DC/10 28 66 48 8
TRIO-PS/1AC/48DC/5 28 66 49 1
TRIO-PS/1AC/48DC/10 28 66 50 1
input: 3-phase, 3 x 320 to 575 V AC
24 V / 5 A 24 V / 10 A 24 V / 20 A 24 V / 40 A
TRIO-PS/3AC/24DC/5 28 66 46 2
TRIO-PS/3AC/24DC/10 28 66 45 9
TRIO-PS/3AC/24DC/20 28 66 39 4
TRIO-PS/3AC/24DC/40 28 66 40 4
115
130
115
130
152,5
130
152,5
130
32 40 60 115
115
130
40
152,5
130
115
190
130
139
input: 10–32 V DC, 36–75 V DC input: 18–32 V DC
24 V / 1 A 24 V / 10 A
MINI-PS-12-24DC/24DC/1 28 66 28 4
QUINT-PS-24DC/24DC/10 28 66 37 8
24 V / 1 A
MINI-PS-48-60DC/24DC/1 28 66 27 1
DC-DC-Wandler
125
130
107
99
8022,5
F
U u c
sTep poWer j u cinput: 1-phase, 85 to 264 V AC, 95 to 250 V
DC
24 V / 0.75 A 24 V / 1.75 A 24 V / 2.5 A 5 V / 6.5 A 24 V / 4.2
A
STEP-PS/1AC/24DC/0.75 28 68 63 5
STEP-PS/1AC/24DC/1.75 28 68 64 8
STEP-PS/1AC/24DC/2.5 28 68 65 1
STEP-PS/1AC/5DC/6.5 28 68 54 1
STEP-PS/1AC/24DC/4.2 28 68 66 4
12 V / 1.5 A 12 V / 3 A 12 V / 5 A 15 V / 4 A 48 V / 2 A
STEP-PS/1AC/12DC/1.5 28 68 56 7
STEP-PS/1AC/12DC/3 28 68 57 0
STEP-PS/1AC/12DC/5 28 68 58 3
STEP-PS/1AC/15DC/4 28 68 61 9
STEP-PS/1AC/48DC/2 28 68 68 0
24 V / 2 x 30 A / 1 x 60 A
QUINT-DIODE/40 29 38 96 3
94,5
62
84
Diode U u c
QuinT poWer 3˜ input: 3-phase, 3 x 320 to 575 V AC, 450 to 800 V
DC
24 V / 5 A 24 V / 10 A 24 V / 20 A 48 V / 10 A 24 V / 40 A
QUINT-PS/3AC/24DC/5 28 66 73 4
QUINT-PS/3AC/24DC/10 28 66 70 5
QUINT-PS/3AC/24DC/20 28 66 79 2
QUINT-PS-3x400-500AC/48DC/10 29 38 21 9
QUINT-PS-3x400-500AC/24DC/40 29 38 64 6
48 V / 20 A
QUINT-PS-3x400-500AC/48DC/20 29 38 22 2
125
130
40
125
130
60
125
130
240
QuinT poWer 1˜ input: 1-phase, 85 to 264 V AC, 90 to 350 V
DC
24 V / 3.5 A 24 V / 5 A 24 V / 10 A 24 V / 20 A 24 V / 40 A
QUINT-PS/1AC/24DC/3.5 28 66 74 7
QUINT-PS/1AC/24DC/5 28 66 75 0
QUINT-PS/1AC/24DC/10 28 66 76 3
QUINT-PS/1AC/24DC/20 28 66 77 6
QUINT-PS-100-240AC/24DC/40 29 38 87 9
48 V / 5 A 48 V / 10 A 48 V / 20 A
QUINT-PS/1AC/48DC/5 28 66 67 9
QUINT-PS/1AC/48DC/10 28 66 68 2
QUINT-PS-100-240AC/48DC/20 29 38 97 6
12 V / 15 A 12 V / 20 A
QUINT-PS/1AC/12DC/15 28 66 71 8
QUINT-PS/1AC/12DC/20 28 66 72 1
125
130
125
4032
125
130
125
130
125
130
60 90 240
130
mini poWer U u cinput: 1-phase, 85 to 264 V AC, (MINI-PS...
90–350 V DC)
24 V / 1,3 A 24 V / 1,5 A 24 V / 2 A ± 15 V / 1 A 24 V / 4 A 24
V / 100 W
MINI-PS-100-240AC/24DC/1,3 28 66 44 6
MINI-SYS-PS-100-240AC/24DC/1.5 28 66 98 3
MINI-PS-100-240AC/24DC/2 29 38 73 0
MINI-PS-100-240AC/2x15DC/1 29 38 74 3
MINI-PS-100-240AC/24DC/4 29 38 83 7
MINI-PS-100-240AC/24DC/C2LPS 28 66 33 6
5 V / 3 A 24 V / 1,5 A 10-15 V / 2 A 10-15 V / 8 A
MINI-PS-100-240AC/5DC/3 29 38 71 4
MINI-PS-100-240AC/24DC/1.5/EX 28 66 65 3
MINI-PS-100-240AC/10-15DC/2 29 38 75 6
MINI-PS-100-240AC/10-15DC/8 28 66 29 7
* optional, for supplying further modules of the same system
with a regulated 24 V DC voltage. Two are required per power supply
unit.
107
99
45
107
99
45
107
99
22,5
95
99
35
107
99
67,5
Din rail connector
me 17,5 Tbus 1.5/ 5-sT-3,82 Gn
27 09 56 1
*
99
107
67,5
125
130
69
61
90
36
61
90
54 72
61
90
61
90
90
asi U u cinput: 85 to 264 V AC, 90 to 350 V DC
30 V / 2,4 A
ASI QUINT 100-240/2.4 EFD 27 36 68 6
30 V / 4,8 A
ASI QUINT 100-240/4.8 EFD 27 36 69 9
125
145
70
eX F U u cinput: 85 to 264 V AC, 90 to 350 V DC
24 V / 5 A
QUINT-PS-100-240AC/24DC/5/EX 29 38 85 3
24 V / 10 A
QUINT-PS-100-240AC/24DC/10/EX 29 38 86 6
125
130
85
125
130
55
125
55
145
125
130
160
115
130
40
F F
FIn preparation:
72
61
90
F
F For QUINT POWER SFB in preparation:F B j u c (nur 24 V) F For
QUINT POWER SFB in preparation:F B j u c (nur 24 V)
Choose your power supply unit here from
our extensive range of products. Refer
to the table for the technical features of
QUINT POWER, TRIO POWER,
MINI POWER and STEP POWER.
Power supply units fromPHOENIX CONTACT –All the advantages at a
glance