MINNESOTA PRICING SCHEDULE (Typed responses required) 12/2015 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: [email protected]SPEC # REQUESTED INFORMATION ANSWER 1.0 TRACTOR CATALOG SECTION PRICE PRICE LIST TITLE: Case Farmall Compact DATE AND ID# OF PRICE LIST: 15-Aug PERCENTAGE DISCOUNT TO BE APPLIED TO PRICE LIST: 28% 1.1 Price for manuals, (service, parts, repair, and operations) $1,100.00 1.2 Price for set of fluid and air filters $550.00 2.0 PERFORMANCE/EXTENDED WARRANTY OPTIONS Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc. (Specify years, miles or hours extended term covers.) 2.1 ______________________________________________ $ 2.2 ______________________________________________ $ 3.0 INSTALLATION - PER HOUR $96.00 Installation services may be requested on an "as needed" basis. See Special Terms and Conditions 4.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: $ If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: ________________ 5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 6.0 PERCENTAGE DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES See Special Terms and Conditions 7.0 DELIVERY STARTING POINT - City, State, Zip Buffalo,mn 55313 See Special Terms and Conditions - No flat rate allowed $2.50 763-682-2200 763-682-6141 Trueman Welters Jon Ferris 1600 hwy 55 east Buffalo Mn 55313
123
Embed
MINNESOTA PRICING SCHEDULE...MINNESOTA PRICING SCHEDULE (Typed responses required) 12/2015 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1.0 TRACTOR CATALOG SECTION PRICE PRICE LIST TITLE: Case Farmall Compact
DATE AND ID# OF PRICE LIST: 15-Aug
PERCENTAGE DISCOUNT TO BE APPLIED TO PRICE LIST: 28%
1.1 Price for manuals, (service, parts, repair, and operations) $1,100.00
1.2 Price for set of fluid and air filters $550.00
2.0 PERFORMANCE/EXTENDED WARRANTY OPTIONSOffer performance/warranty options. Numbers starting with 2.1, 2.2, etc.(Specify years, miles or hours extended term covers.)
3.0 INSTALLATION - PER HOUR $96.00Installation services may be requested on an "as needed" basis.See Special Terms and Conditions
4.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.
Percent (%) of Rental Fee applied to purchase price: $
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
6.0 PERCENTAGE DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES See Special Terms and Conditions
7.0 DELIVERY STARTING POINT - City, State, Zip Buffalo,mn 55313See Special Terms and Conditions - No flat rate allowed $2.50
ADVANCE FREIGHT Advance freight will be added to the machinery invoice as a separate net charge for machinery shipped from field locations or from other than specified Ex Works locations. PRICES Prices are Ex Works factory, where the goods are manufactured, except where noted. For detailed information concerning prices, please refer to your OPERATING GUIDE. CONTENTS OF ORGANIZATION CNH Industrial N.V. issues price lists and revisions covering each Case IH contract. The U.S. Price List is published in U.S. funds and the Canadian Price List is published in Canadian funds. Ensure that you are using the correct price list. U.S. or Canada is referenced at the top of each page and the Canadian price lists have a Maple Leaf on the price list cover page. Freight, duty and sales taxes are NOT included in any wholegoods or attachment prices shown in the price list. Any appropriate freight, duty, Federal, State, and Provincial taxes will be added to the machinery invoice as separate net charges. PROCEDURE The price pages for each machine (or group of machines) lists both "Factory Supplied Options" and "Factory Supplied Accessories." Each price list is comprised of the various machines sold under that contract. Each price book section has "Factory Supplied Options" and "Factory Supplied Accessories" price pages. When ordering and pricing a machine, follow the ordering instructions listed for that machine. Accessories listed following the "Factory Supplied Accessories" heading are available for installation in the field. DISTRIBUTION OF PRICE LISTS Price lists and periodic price list revisions will be posted on the Dealer Portal and distributed electronically when possible. Printed copies of current price lists, index tabs and binders can be purchased from the Document Management Center (DMC). Orders should be placed only through the DMC web site link located on the Dealer Portal. For DMC customer service inquiries, other than placing orders, call (262) 636-7540.
Internal E-mail: #NA DMC ORDER CENTER Complete U.S. Price List is PL-100 Complete Canadian Price List is PLC-100
Periodic price list revisions are usually accompanied by a cover sheet which carries instructions on price page changes and where to insert replacement or new price pages. The revisions are dated and are effective as of that date. \
FARMALL ® SERIES COMPACT TRACTORS TABLE OF CONTENTS
COMPACT TRACTORSCOMPACT FARMALL A SERIES TRACTORS Standard Features ................................................................................................................................... 1 Price List .................................................................................................................................................. 3
FARMALL 30C and 35C TRACTORS TIER 4B Standard Features ................................................................................................................................... 7 Price List .................................................................................................................................................. 9 Factory Supplied Attachments ................................................................................................................. 11
FARMALL 40C and 50C TRACTORS TIER 4B Standard Features ................................................................................................................................... 13 Price List .................................................................................................................................................. 15 Factory Supplied Attachments ................................................................................................................. 17
FARMALL 45C/55C CVT TRACTORS- T4 Standard Features ................................................................................................................................... 19 Price List .................................................................................................................................................. 21 Factory Supplied Attachments ................................................................................................................. 17
LOADERS FOR FARMALL COMPACT TRACTORSL340A LOADERS FOR COMPACT FARMALL A T4 Standard Features ................................................................................................................................... 23 Price List .................................................................................................................................................. 24 Factory Supplied Attachments ................................................................................................................. 25
L350A LOADERS FOR COMPACT FARMALL 30C and 35C TIER 4 Standard Features ................................................................................................................................... 27 Price List .................................................................................................................................................. 28 Factory Supplied Attachments ................................................................................................................. 29
L360A LOADERS FOR COMPACT FARMALL 40C and 50C TIER 4 Standard Features ................................................................................................................................... 31 Price List .................................................................................................................................................. 32 Factory Supplied Attachments ................................................................................................................. 33
L350A LOADER FARMALL B CVT AND C CVT Standard Features ................................................................................................................................... 35 Price List .................................................................................................................................................. 36 Factory Supplied Attachments ................................................................................................................. 37
FARMALL ® SERIES COMPACT TRACTORS TABLE OF CONTENTS
COMPACT TRACTORS IMPLEMENTS AND ATTACHMENTSMW SERIES MOWERS FOR FARMALL A AND FARMALL C Standard Features ................................................................................................................................... 39 Price List .................................................................................................................................................. 40
MW SERIES MOWERS FOR FARMALL B/C CVT Standard Features ................................................................................................................................... 41 Price List .................................................................................................................................................. 42 Factory Supplied Attachments ................................................................................................................. 43
MW SERIES MOWERS FOR FARMALL B Standard Features ................................................................................................................................... 45 Price List .................................................................................................................................................. 46
RR SERIES REAR MOUNT FINISHING MOWERS Standard Features ................................................................................................................................... 47 Price List .................................................................................................................................................. 49
BR SERIES FRONT MOUNT ROTARY BROOMS Standard Features ................................................................................................................................... 51 Price List .................................................................................................................................................. 52 Factory Supplied Attachments ................................................................................................................. 54
TL SERIES ROTARY TILLERS Standard Features ................................................................................................................................... 55 Price List .................................................................................................................................................. 56
BM SERIES FRONT MOUNTED BLADES - BM1 Standard Features ................................................................................................................................... 57 Price List .................................................................................................................................................. 58 Factory Supplied Attachments ................................................................................................................. 60
BS SERIES FRONT MOUNT SNOW BLOWERS Standard Features ................................................................................................................................... 61 Price List .................................................................................................................................................. 63 Factory Supplied Attachments ................................................................................................................. 66
BS SERIES REAR MOUNT SNOW BLOWERS Standard Features ................................................................................................................................... 67 Price List .................................................................................................................................................. 68 Factory Supplied Attachments ................................................................................................................. 69
FARMALL ® SERIES COMPACT TRACTORS TABLE OF CONTENTS
COMPACT TRACTORS IMPLEMENTS AND ATTACHMENTSBHA SERIES BACKHOES Standard Features ................................................................................................................................... 71 Price List .................................................................................................................................................. 72 Factory Supplied Attachments ................................................................................................................. 75
RC ROTARY CUTTERS Standard Features ................................................................................................................................... 77 Price List .................................................................................................................................................. 80 Factory Supplied Attachments ................................................................................................................. 83
WORK EZ ® DISK HARROW Standard Features ................................................................................................................................... 85 Price List .................................................................................................................................................. 86
WORK EZ ® RAKES Standard Features ................................................................................................................................... 87 Price List .................................................................................................................................................. 88
WORK EZ ® BOX BLADES Standard Features ................................................................................................................................... 89 Price List .................................................................................................................................................. 90
WORK EZ ® REAR BLADES Standard Features ................................................................................................................................... 91 Price List .................................................................................................................................................. 92
WORK EZ ® EZ MATCH Standard Features ................................................................................................................................... 93 Price List .................................................................................................................................................. 94
WORK EZ ® BALE CARRIERS Standard Features ................................................................................................................................... 95 Price List .................................................................................................................................................. 96
WORK EZ ® HAY SPEARS Standard Features ................................................................................................................................... 97 Price List .................................................................................................................................................. 98
FARMALL ® SERIES COMPACT TRACTORS TABLE OF CONTENTS
Farmall 35A Tier 4B: 3-Range Hydrostatic with Cruise Control ISM 3 Cyl. Turbo Diesel Engine and Dual-Pedal direction control for 36.2 Gross Engine hp @ 2600 rpm forward and reverse 30.8 PTO hp @ 2600 rpm (Gear) 29.0 PTO hp @ 2600 rpm (Hydro) HYDRAULIC SYSTEM: 92 cu. in. (1.5L) Displacement Open Center Hydraulic System
1808 lb. (820 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Fixed Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL High Beam Headlights Indicator 12-volt, 80Ah, 660 CCA Battery Emmision Activation Indicator Safety Start Switch
Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System
-T0CT 01 027 000 10-AUG-151 of 114
(Ex Works Port of Entry)
COMPACT FARMALL A SERIES TRACTORUS PRICE LIST
-T0CT 01
Standard Equipment
LIGHTING: FRONT AXLE: (2) Incondescent Corner Work Lights Mechanical Front Drive (MFD) (2) Halogen Headlights Fixed Position Rims (2) Taillights / Brakelights 47.1 in. (1197 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals
REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 tires only - Independent 540 rpm Fixed Position Rims - R3, R4 tires - Electro-hydraulic engagement 52.5 in. (1333 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap
Foot Throttle REAR DIFFERENTIAL LOCK Left Side Step Foot actuated mechanical Left Side Grab Handle
Right Side Cupholder & Tray STEERING: Hydrostatic Power Steering SLOW MOVING VEHICLE EMBLEM Tilt Steering Column
BRAKES: Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever
-T0CT 01 027 000 10-AUG-152 of 114
(Ex Works Port of Entry)
COMPACT FARMALL A SERIES TRACTORUS PRICE LIST
-T0CT 01
Models
COMMERCIAL MODEL ENGINE POWER Weight Factory Data List Price FARMALL 30A 30 HP 3,530 LB 9016321P69 $21,197.00 FARMALL 35A 35 HP 3,530 LB 9017601P43 $22,859.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
TRANSMISSION
SD_T2810 TRANSMISSION 720110 12 x 12 Synchro-shuttle No Charge 729290 Hydrostatic Transmission 9001040P27 $1,351.00
HYDRAULICS
SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs No Charge 720366 1 Remote SDA 9000518P98 $674.00
FRONT WHEELS AND TIRES
SD_T4940 FRONT WHEELS AND TIRES 8266304 25 x 8.50 - 14 6PR R4
Must be ordered with 43 x 16.00-20 R4 (8364564) Rear Tires. No Charge
8204604 7 x 14 6PR R1 Ag Bar Must be ordered with 11.2 x 24 4PR R1 Ag Bar (8332604) Rear Tires.
(900085P47) ($111.00)
8152604 25 x 8.50-14 4PR R3 T Must be ordered with 41 x 14.00-20 4PR R3 (8304804) Rear Tires.
(900085P47) ($111.00)
REAR WHEELS AND TIRES
SD_T4950 REAR WHEELS AND TIRES 8364564 43 x 16.00-20 R4 No Charge 8332604 11.2 x 24 4PR R1 Ag Bar (900234P08) ($304.00) 8304804 41 x 14.00-20 4PR R3 9000147P84 $192.00
-T0CT 01 027 000 10-AUG-153 of 114
(Ex Works Port of Entry)
COMPACT FARMALL A SERIES TRACTORUS PRICE LIST
-T0CT 01
OPERATOR MANUALS
SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge 729187 French Canadian No Charge
-T0CT 01 027 000 10-AUG-154 of 114
(Ex Works Port of Entry)
COMPACT FARMALL A SERIES TRACTORUS PRICE LIST
-T0CT 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Front Wheels and Tires 820460466 7X14 6PR R1 CIH LSM 95 LB 9000281P82 $366.00 815260496 25X8.50-14 4PR R3 TURF CIH LSM 98 LB 9000281P82 $366.00 826630466 25X8.50-14 6PR R4 CIH LSM 107 LB 9000367P29 $477.00
Rear Wheels and Tires 833260456 11.2X24 4PR R1 CIH LSM 343 LB 9000719P95 $935.00 836456426 43X16-20 4PLY TL R4 CIH 418 LB 9000954P03 $1,239.00 830480456 41X14.00-20 4PR R3 TURF CIH LS 347 LB 9001101P87 $1,431.00
Farmall 35C Tier 4B: 3-Range Hydrostatic with Cruise Control ISM 3 Cyl. Turbo Diesel Engine and Dual-Pedal direction control for 36.2 Gross Engine hp @ 2600 rpm forward and reverse 29.6 PTO hp @ 2600 rpm (Gear) 28.1 PTO hp @ 2600 rpm (Hydro) HYDRAULIC SYSTEM: 92 cu. in. (1.5L) Displacement Open Center Hydraulic System
1808 lb. (820 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Flexible Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL High Beam Headlights Indicator 12-volt, 80Ah, 660 CCA Battery Emmision Activation Indicator Safety Start Switch
Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System
-T0CP 01 027 000 10-AUG-157 of 114
(Ex Works Port of Entry)
FARMALL 30C/35C TRACTORS - TIER 4BUS PRICE LIST
-T0CP 01
Standard Equipment
LIGHTING: FRONT AXLE: (2) Halogen Corner Work Lights Four Wheel Drive (FWD) (2) Halogen Headlights Fixed Position Rims (2) Taillights / Brakelights 45.6 in. (1159 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals
REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 tires only - Independent 540 rpm Fixed Position Rims - R3, R4 tires - Electro-hydraulic engagement 46.5 in. (1283 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap
COMMERCIAL MODEL VERSION Weight Factory Data List Price FARMALL 30C Rops 4,500 LB 9017930P99 $23,287.00 FARMALL 35C Rops 4,500 LB 9019331P62 $25,106.00 FARMALL 35C Cab 4,500 LB 9024131P80 $31,340.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
TRANSMISSION
TRANSMISSION
SD_T2810 TRANSMISSION 720110 12 x 12 Synchro-shuttle No Charge 729290 Hydrostatic Transmission 9001379P07 $1,791.00
HYDRAULICS
SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs
Less Rear Remote No Charge
720366 1 Remote SDA Not Available on Cab Models
9000518P98 $674.00
720347 2 Remote Valves 9000823P90 $1,070.00
FRONT WHEELS AND TIRES
SD_T4940 FRONT WHEELS AND TIRES 8266304 25 x 8.50 - 14 6PR R4
Must be ordered with 43 x 16.00-20 R4 Rear Tires (8364564). No Charge
8204604 7 x 14 6PR R1 Ag Bar Must be ordered with 11.2 x 24 4PR R1 Ag Bar Rear Tires (8332604).
(900085P47) ($111.00)
8152604 25 x 8.50-14 4PR R3 T Must be ordered with 41 x 14.00-20 4PR R3 Rear Tires (8304804).
(900085P47) ($111.00)
-T0CP 01 027 000 10-AUG-159 of 114
(Ex Works Port of Entry)
FARMALL 30C/35C TRACTORS - TIER 4BUS PRICE LIST
-T0CP 01
REAR WHEELS AND TIRES
SD_T4950 REAR WHEELS AND TIRES 8364564 43 x 16.00-20 R4 No Charge 8332604 11.2 x 24 4PR R1 Ag Bar (900234P08) ($304.00) 8304804 41 x 14.00-20 4PR R3 9000147P84 $192.00
OPERATOR MANUALS
SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge 729184 French Canadian - Gear No Charge
-T0CP 01 027 000 10-AUG-1510 of 114
(Ex Works Port of Entry)
FARMALL 30C/35C TRACTORS - TIER 4BUS PRICE LIST
-T0CP 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Front Wheels and Tires 815260433 25X8.50-14 4PR R3 TURF CI 98 LB 9000281P82 $366.00 820460466 7X14 6PR R1 CIH LSM 95 LB 9000281P82 $366.00 826630486 25x8.50-14 6PR CIH LSM 109 LB 9000367P29 $477.00
Rear Wheels and Tires 833260456 11.2X24 4PR R1 CIH LSM 343 LB 9000719P95 $935.00 836456466 43X16-20 4PLY TL R4 CIH 420 LB 9000954P03 $1,239.00 830480496 41X14.00-20 4PR R3 TURF CIH LS 344 LB 9001101P87 $1,431.00
-T0CP 01 027 000 10-AUG-1511 of 114
12 of 114
(Ex Works Port of Entry)
FARMALL 40C/50C TRACTORS - TIER 4BUS PRICE LIST
-T0CP 02
Standard Equipment
DIESEL ENGINE: TRANSMISSION OPTIONS: Farmall 40C Tier 4B: 16 x 16 Synchronized Shuttle Shift ISM 4 Cyl. Diesel Engine (SSS) 40.7 Gross Engine hp @ 2600 rpm Left-hand, dash mounted, 32.4 PTO hp @ 2600 rpm (Gear) synchronized shuttle 30.8 PTO hp @ 2600 rpm (Hydro) (4) Synchronized gears 135 cu. in. (2.22L) Displacement (4) Non-synchronized ranges
Farmall 50C Tier 4B: 3- Range Hydrostatic with Cruise Control ISM 4 Cyl. Diesel Engine and Dual Pedal direction control for 45.6 Gross Engine hp @ 2600 rpm forward and reverse 37.3 PTO hp @ 2600 rpm (Gear) 35.4 PTO hp @ 2600 rpm (Hydro) HYDRAULIC SYSTEM: 135 cu. in. (2.22L) Displacement Open Center Hydraulic System
Dual Gear-type Pumps ALL MODELS: Implement Pump Capacity: 4 Cylinders - 8.2 gpm (31.2 L/min) Naturally Aspirated Steering Pump Capacity: Under Hood Muffler / Exhaust - Gear models = 4.2 gpm (15.9 L/min) Two-stage Dual Element Air Cleaner - HST models = 5.3 gpm (19.9 L/min) Full-flow, Spin-on Oil Filter Mid-mount Hydraulic Valve & Joystick 10.5 gallon (40L) Fuel Tank (STD) Fuel Filter with water separator Quick Glow Plug Starting Aid 3-POINT LIFT SYSTEM: Flip-up Hood w/ Gas Strut Lift Capacity @ ballk ends:
2756 lb. (1250 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Flexible Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL: High Beam Headlight Indicator 12-volt, 80Ah, 660 CCA Battery Emmisions Indicator Safety Start Switch
Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System
-T0CP 02 027 000 10-AUG-1513 of 114
(Ex Works Port of Entry)
FARMALL 40C/50C TRACTORS - TIER 4BUS PRICE LIST
-T0CP 02
Standard Equipment
LIGHTING: FRONT AXLE: (2) Halogen Corner Work Lights Four Wheel Drive (FWD) (2) Halogen Headlights Fixed position rims (2) Taillights / Brakelights 51.7 in. (1314 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals
REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 only - Independent 540 rpm Fixed Position Rims - R3, R4 - Electro-hydraulic engagement 47.7 in. (1211 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap
SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge 729184 French Canadian - Gear No Charge
-T0CP 02 027 000 10-AUG-1516 of 114
(Ex Works Port of Entry)
FARMALL 40C/50C TRACTORS - TIER 4BUS PRICE LIST
-T0CP 02
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Front Wheels and Tires 825330446 9.5-16 4PR R1 CIH LSM 171 LB 9000560P56 $728.00 829960426 28X8.50-15 4PR TL TURF (R3) 4W 48 LB 9000560P56 $728.00 827650416 12 X 16.5 6PR R4 LSM CIH 177 LB 9000659P12 $856.00
Rear Wheels and Tires 833860446 13.6X24 4PR R1 CIH LSM 298 LB 9000823P90 $1,070.00 830480496 41X14.00-20 4PR R3 TURF CIH LS 344 LB 9001101P87 $1,431.00 839670416 17.5LX24 6PR R4 CIH 581 LB 9001425P27 $1,851.00
-T0CP 02 027 000 10-AUG-1517 of 114
18 of 114
(Ex Works - See Standard Equipment)
FARMALL 45C/55C CVT TRACTORS - T4US PRICE LIST
-T0CN 01
Standard Equipment
MODELS: TRANSMISSION: (continued) Farmall 45C CVT Single pedal for speed control 45.1 Gross Engine hp @ 2600 rpm Electronic Adjustable Speed & Response 46.0 Gross Engine Cv @2600 rpm settings 32.7 PTO hp @ 2600 rpm
HYDRAULICS: Farmall 55C CVT Open Center Hydraulic System 53.0 Gross Engine HP @ 2600 rpm Dual Gear-type Pumps 54.0 Gross Engine Cv @2600 rpm Implement Pump Capacity: 41.2 PTO hp @ 2600 rpm CAB 9.7 gpm (36.9 L/min) 40.4 PTO hp @ 2600 rpm CAB Steering Pump Capacity:
5.1 gpm (21.0 L/min) ENGINE: Mid-mount Hydraulic Ports FPT Engine Model R7531E4 135.9 cu. in. (2.2L) Displacement HITCH: 3 Cylinders Lift Capacity @ 24 in. behind link ends: Tier 4b Compliant 2800 lb. (1270 kg) Turbo-charged Category I, 3-point Linkage Under Hood Exhaust Position Control Lever Two-stage Dual Element Air Cleaner Drop Rate Control Knob Full-flow, Spin-on Oil Filter Crank-type Leveling Mechanism 13 gallon (49.2 L) Fuel Tank Telescoping Stabilizers Fuel Filter with water separator Flexible Link Ends Quick Glow Plug Starting Aid Flip-Up Hood ELECTRICAL: MMV Standard 12-volt, 850 CCA Battery
Safety Start Switch INSTRUMENT PANEL: Key Start/Fuel Shutoff Analog Tachometer Alternator Fuel Gauge 75 amp - ROPS models Coolant Temperature Gauge 90 amp - CAB models Hour Meter Operator Presence System Engine Oil Pressure Warning Light 12-volt DC (10 amp) Auxiliary Power Battery Charge Warning Light outlet Status Indicator Lights Digital display panel LIGHTING:
Cab / ROPS TRANSMISSION: (2) Halogen Corner Work Lights EasyDrive™ Continuously Variable (2) Halogen Headlights (high/low beam) Transmission (CVT) Series II (2) Taillights Cruise Control (2) Flashers / Turn Signals Steering Column mounted shuttle lever Cab Only for FWD/REV directional control (2) Front-mounted Cab Work Lights
(2) Rear-mounted Cab Work Lights
-T0CN 01 027 000 10-AUG-1519 of 114
(Ex Works - See Standard Equipment)
FARMALL 45C/55C CVT TRACTORS - T4US PRICE LIST
-T0CN 01
Standard Equipment
PTO: ROPS PLATFORM: Rear Deluxe Viny Covered Seat Independent 540 rpm Full suspension with weight Flip-up Shield adjustability Shaft Cap Fore/Aft/ Swivel adjustment Mid PTO Floor Mat 2,000 RPM Cup Holder
Left and Right Side Steps DRAWBAR: Toolbox Swinging Slow Moving Vehicle Emblem 2-Position Extendable
CAB PLATFORM: REAR DIFFERENTIAL LOCK (2) Doors
Rear Window Opens 35 degrees STEERING: High Visibility Panel in Roof above Hydrostatic Power Steering Windshield Tilt and Telescoping Steering Column Air Conditioning
Heater BRAKES: 3-speed Fan Control for heat and A/C Wet Disc Single Cab Air Filter Parking Brake Lock Lever Radio-ready with (2) speakers, wiring Left Side Mounted Suspended Brake and antenna Pedals Deluxe Cloth Covered Seat
Full suspension with weight FRONT AXLE: adjustability Four Wheel Drive (FWD) Fore/Aft/ Swivel adjustment Fixed Position Rims Floor Mat 52.5 in. (1334 mm) Tread Setting with Cloth Covered Headliner R4 tires Adjustable Sun Visor
Interior Rearview Mirror FRONT TIRES: Left and Right External Mounted Mirrors 10-16.5 6PR R4 industrial bar tread Removable Plug in rear of cab to route
harness REAR AXLE: Front Windshield Wiper and Washer Flange-type Axle Cup Holder Adjustable Position Rims - R1 Left and Right Side Steps Fixed Rims - R3, R4, Galaxy Toolbox 55.3 in. to 67.4 in. (1404 - 1712 mm) Slow Moving Vehicle Emblem Tread Setting with R4 tires
WARRANTY: REAR TIRES: Full Coverage - 24 months or 2000 17.5LX24 6PR R4 tread hours
Powertrain - 36 months or 2000 hours
-T0CN 01 027 000 10-AUG-1520 of 114
(Ex Works - See Standard Equipment)
FARMALL 45C/55C CVT TRACTORS - T4US PRICE LIST
-T0CN 01
Models
COMMERCIALMODEL
VERSION ENGINE POWER Weight Factory Data List Price
FARMALL 45C CVTT4 ROPS
Rops 45 HP 6,239 LB 9027175P61 $35,293.00
FARMALL 45C CVTT4 CAB
Cab 45 HP 6,239 LB 9034022P45 $44,185.00
FARMALL 55C CVTT4 ROPS
Rops 53HP 6,239 LB 9029731P24 $38,612.00
FARMALL 55C CVTT4 CAB
Cab 53HP 6,239 LB 9036578P08 $47,504.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
OPERATOR STRUCTURE
SD_05109 ARMREST X5109X No Armrest No Charge 449330 Armrests 9000060P06 $78.00
SD_T9162 RADIO/RADIO READY XT9162X Standard Less Radio No Charge 420804 AM/FM Stereo Radio
AM/FM Radio with MP3 port Not Available on Rops Models
9000240P24 $312.00
ENGINE
STARTING AID
SD_T9940 MKT PACK.FOR COLD C XT9940X Cold Start Thrmostar No Charge 729568 Mkt Pack F/Cold Cli
720336 2 Aux.Hydr.:1 S/D 1 2 Rear remotes: 1st position rear remote - float & detent 2nd position rear remote - 3 position detent valve (no float)
9001199P66 $1,558.00
FRONT WHEELS AND TIRES
SD_T4940 FRONT WHEELS AND TIRES 8275704 10-16.5 6PR R4 Ind. Bar
Must be ordered with 17.5Lx24 6PR R4 (8396704) Rear Tires No Charge
8278604 27 x 10.50-15 4PR R3 Turf Must be ordered with 44 x 18-20 4PR R3 Turf (8303604) Rear Tires
(900116P27) ($151.00)
8229704 8-16 6PR R1(Ag Bar) 8229704 Must be ordered with 14.9-24 4PR R1 Ag Bar (8342604) Rear Tires
(900116P27) ($151.00)
8224704 27/12LL x 15 6PR Galaxy® Tires Must be ordered with 22.5LL x 16.1 6PR R3 Galaxy (8310704) Rear Tires Galaxy tires are NOT compatible with Front-End Loader, Front Attachments or Mid Mount Mowers
9000067P76 $88.00
REAR WHEELS AND TIRES
SD_T4950 REAR WHEELS AND TIRES 8396704 17.5Lx24 6PR R4 No Charge 8303604 44 x 18-20 4PR R3 Turf (900314P93) ($409.00) 8342604 14.9-24 4PR R1 Ag Bar (900298P76) ($388.00) 8310704 22.5LL x 16.1 6PR R3 Galaxy®
Galaxy tires are NOT compatible with front-end loader, front attachments or mid mount mowers.
9000591P36 $768.00
OPERATOR'S MANUAL
SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge 729187 French Canadian No Charge
Distances in (in/mm) unless Basic Loader for Farmall 30A & 35A otherwise noted. Forces in (lbs/kg) with Improved Visibility mounting unless otherwise noted. system (like L350A) Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 68" HD Material Bucket (Quick Attach) 98.4 / 2500 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 75.3 / 1913
Digging Depth: Loader specifications are subject to 8 / 203 change and may vary based on tractor Lift Capacity @ bucket pivot point: model and tire size. 1250 / 567
Lift Capacity @ 19.7 in. (500mm) from bucket pivot point: 890 / 404 Breakout Force @ bucket pivot point: 2700 / 1225 Breakout Force @ 19.7 in. (500mm) from bucket pivot point: 1900 / 862 Reach @ Maximum Lift: 31 / 787 Bucket Rollback: 32˚ Bucket Dump Angle: 39˚ Bucket Level Indicator Parking Stand
NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for recommended counterweighting.
-CP9J 01 027 000 10-AUG-1523 of 114
(Ex Works Port of Entry)
L340A LOADER FOR FARMALL A T4US PRICE LIST
-CP9J 01
Models
COMMERCIALMODEL
PACKAGED KIT SPECIALTY Weight Factory Data List Price
L340A FARMALL AT4
Quick Attach Less Valve IV 68 in. Bucket 9004088P70 $5,310.00
-CP9J 01 027 000 10-AUG-1524 of 114
(Ex Works Port of Entry)
L340A LOADER FOR FARMALL A T4US PRICE LIST
-CP9J 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Other Equipment 717747006 Ballast box 1000 Lb Max
(Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
169 LB 9000483P56 $628.00
717748006 Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
243 LB 9000636P02 $826.00
-CP9J 01 027 000 10-AUG-1525 of 114
26 of 114
(Ex Works Port of Entry)
L350A LOADER FOR FARMALL 30C AND 35CUS PRICE LIST
-CP9J 02
Standard Equipment
L350A SPECIFICATIONS L350A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L350A Loader includes the following: L350A (For Farmall 30C and 35C Tier 4)
Distances in (in/mm) unless Basic Loader for Farmall 30C and otherwise noted. Forces in (lbs/kg) Farmall 35C Tier 4 with Improved unless otherwise noted Visibility mounting system. Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 68" HD Material Bucket (Quick Attach) 105 / 2667 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 81.5 / 2070
Digging Depth: Loader specifications are subject to 6.5 / 165 change and may vary based on tractor Lift Capacity model and tire size. @ bucket pivot point:
2000 / 907 @ 19.7 in. (500mm) from bucket pivot point: 1540 / 699 Breakout Force @ bucket pivot point: 3540 / 1606 @ 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Reach @ Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand
NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for
-CP9J 02 027 000 10-AUG-1527 of 114
(Ex Works Port of Entry)
L350A LOADER FOR FARMALL 30C AND 35CUS PRICE LIST
-CP9J 02
Models
COMMERCIALMODEL
PACKAGED KIT SPECIALTY Weight Factory Data List Price
L350A 30C/35CROPS
Quick Attach Less Valve IV 68 in. Bucket 800 LB 9004837P91 $6,283.00
L350A 35C CAB Quick Attach Less Valve IVCab
68 in. Bucket 800 LB 9004837P91 $6,283.00
-CP9J 02 027 000 10-AUG-1528 of 114
(Ex Works Port of Entry)
L350A LOADER FOR FARMALL 30C AND 35CUS PRICE LIST
-CP9J 02
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717747006 Ballast box 1000 Lb Max
(Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
169 LB 9000483P56 $628.00
717748006 Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
243 LB 9000636P02 $826.00
-CP9J 02 027 000 10-AUG-1529 of 114
30 of 114
(Ex Works Port of Entry)
L360A LOADER FOR FARMALL 40C AND 50CUS PRICE LIST
-CP9J 03
Standard Equipment
L360A SPECIFICATIONS L360A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L360A for Farmall 40C and 50C Tier 4 L360A (For Farmall 40C and 50C Tier4)
Distances in (in/mm) unless Basic Loader for Farmall 40C and otherwise noted. Forces in (lbs/kg) Farmall 50C Tier 4 with Improved unless otherwise noted Visibility mounting system Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 72" HD Material Bucket (Quick Attach) 112.3 / 2852 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 85.2 / 2164
Digging Depth: Loader specifications are subject to 4.9 / 125 change and may vary based on tractor Lift Capacity model and tire size. @ bucket pivot point:
2500 / 1134 @ 19.7 in. (500mm) from bucket pivot point: 1830 / 830 Breakout Force @ bucket pivot point: 5000 / 2268 @ 19.7 in. (500mm) from bucket pivot point: 3114 / 1412 Reach @ Maximum Lift: 32 / 813 Bucket Rollback: 39º Bucket Dump Angle: 49º 4-Bar Bucket Linkage Bucket Level Indicator Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for
-CP9J 03 027 000 10-AUG-1531 of 114
(Ex Works Port of Entry)
L360A LOADER FOR FARMALL 40C AND 50CUS PRICE LIST
-CP9J 03
Models
COMMERCIALMODEL
PACKAGED KIT SPECIALTY Weight Factory Data List Price
L360A 40C/50C CAB Quick Attach Less Valve IVCab
72 in. Bucket 650 LB 9005027P33 $6,529.00
L360A 40C/50CROPS
Quick Attach Less Valve IV 72 in. Bucket 800 LB 9005027P33 $6,529.00
-CP9J 03 027 000 10-AUG-1532 of 114
(Ex Works Port of Entry)
L360A LOADER FOR FARMALL 40C AND 50CUS PRICE LIST
-CP9J 03
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717747006 Ballast box 1000 Lb Max
(Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
169 LB 9000483P56 $628.00
717748006 Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
45C CVT, 50B CVT, and 55C CVT) Basic Loader for Distances in (in/mm) unless Farmall 40B CVT, 45B CVT, otherwise noted. Forces in (lbs/kg) 45C CVT, 50B CVT, and 55C CVT unless otherwise noted with Improved Visibility mounting Curved Boom, Mid-Mount, Quick system. Attach Design Tractors S/N ZDME21931 and after. Maximum Lift Height: Quick Coupler - Skid Steer Style 105 / 2667 72" HD Material Bucket (Quick Attach) Dump Clearance:
81.5 / 2070 FARMALL B AND C CVT TRACTORS ARE Digging Depth: STANDARD LOADER READY 6.5 / 165
Lift Capacity Loader specifications are subject to @ bucket pivot point: change and may vary based on tractor 2000 / 907 model and tire size. @ 19.7 in. (500mm) from bucket
pivot point: 1540 / 699 Breakout Force @ bucket pivot point: 3540 / 1606 @ 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Reach @ Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand
COMPATIBILITY INFORMATION: To assure proper performance, see Operator's manual for recommended counterweighting
-CP9J 04 027 000 10-AUG-1535 of 114
(Ex Works Port of Entry)
L350A LOADER FARMALL B CVT AND C CVTUS PRICE LIST
-CP9J 04
Models
COMMERCIALMODEL
PACKAGED KIT SPECIALTY Weight Factory Data List Price
L350A FARMALL B/CCVT
Quick Attach Less Valve IV 72 in. Bucket 650 LB 9004258P10 $5,530.00
-CP9J 04 027 000 10-AUG-1536 of 114
(Ex Works Port of Entry)
L350A LOADER FARMALL B CVT AND C CVTUS PRICE LIST
-CP9J 04
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717747006 Ballast box 1000 Lb Max
(Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
169 LB 9000483P56 $628.00
717748006 Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required.
243 LB 9000636P02 $826.00
-CP9J 04 027 000 10-AUG-1537 of 114
38 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FARMALL A AND FARMALL CUS PRICE LIST
-CP1Z 01
Standard Equipment
MW266S Side Discharge Mid-Mount MW272S Side Discharge Mid-Mount Rotary Mower Rotary Mower For use with Farmall 30C & 35C Tractors For use with Farmall 40C & 50C Tractors
SPECIFICATIONS: SPECIFICATIONS: Cutting Width (in.) - 66 Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 69 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.) - 23 L x 2.5W Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle 10 gauge top, 1/4" spindle reinforcement pads reinforcement pads
Tire Compatibility: Tire Compatibility: Agricultural (R1) - Yes, limited turn Agricultural (R1) - NO angle: Large Industrial (R4) - NO Right Hand - 24 degrees, Left Hand - 27 degrees Turf (R3) - Yes, limited turn angle: Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - Right Hand - 33 degrees, Left Hand - 35 degrees 37 degrees Galaxy Turf - NO Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees, Left Hand - Mulch Kit - AMENHM728 (Service Parts) 37 degrees Galaxy Turf - NO NOTE:
REQIREMENTS FOR OPERATION Mulch Kit - AMENHM628 (Service Parts) A mid PTO kit is required to operate this
mower. The PTO kit can only be NOTE: ordered through parts (MT20131515). REQUIREMENTS FOR OPERATION A mid PTO kit is required to operate this mower. The PTO kit can only be ordered through parts (MT200131516).
-CP1Z 01 027 000 10-AUG-1539 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FARMALL A AND FARMALL CUS PRICE LIST
-CP1Z 01
Models
COMMERCIAL MODEL Weight Factory Data List Price MW266S FARMALL A/C T4 443 LB 9002805P11 $3,643.00 MW272S FARMALL A/C T4 443 LB 9002889P04 $3,752.00
-CP1Z 01 027 000 10-AUG-1540 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FOR FARMALL B/C CVTUS PRICE LIST
-CP1Z 02
Standard Equipment
MW172S Side Discharge Mid-Mount Rotary Mower For use with Farmall B 40 CVT, 45 CVT & 50 CVT Tractors
SPECIFICATIONS: Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute down 85 Number of Blades - 3 Blade Type - Standard Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle reinforcement pads
Tire Compatibility: Agricultural (R1) - NO Large Industrial (R4) - NO
Turf (R3) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - 35 degrees Galaxy Turf - NO
Mulch Kit - AMENHM728 (Service Parts)
-CP1Z 02 027 000 10-AUG-1541 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FOR FARMALL B/C CVTUS PRICE LIST
-CP1Z 02
Models
COMMERCIAL MODEL Weight Factory Data List Price MW172S FARMALL B/C CVT 620 LB 9002889P04 $3,752.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
OTHER EQUIPMENT
SD_15012 BALE RAMP AND AXLE X15012X No Ramp No Charge 439047 Ramp Kit 9000080P85 $105.00
-CP1Z 02 027 000 10-AUG-1542 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FOR FARMALL B/C CVTUS PRICE LIST
-CP1Z 02
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 439047016 Ramp Kit CLS 2 40 LB 9000080P85 $105.00
-CP1Z 02 027 000 10-AUG-1543 of 114
44 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FOR FARMALL BUS PRICE LIST
-CP1Z 03
Standard Equipment
MW166S Side Discharge Mid-Mount MW172S Side Discharge Mid-Mount Rotary Mower Rotary Mower For use with Farmall 30B & 35B Tractors For use with Farmall 40B & 50B Tractors
SPECIFICATIONS: SPECIFICATIONS: Cutting Width (in.) - 66 Cutting Width (in.) - 72 Cutting Height (in.) - 1-4 Cutting Height (in.) - 1-4 Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 69 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.) - 23 L x 2.5W Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle 10 gauge top, 1/4" spindle reinforcement pads reinforcement pads
Tire Compatibility: Tire Compatibility: Agricultural (R1) - Yes, limited turn Agricultural (R1) - NO angle: Large Industrial (R4) - NO Right Hand - 24 degrees, Left Hand - 27 degrees Turf (R3) - Yes, limited turn angle: Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - Right Hand - 33 degrees, Left Hand - 35 degrees 37 degrees Galaxy Turf - NO Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees, Left Hand - Mulch Kit - AMENHM728 (Service Parts) 37 degrees Galaxy Turf - NO NOTE:
REQIREMENTS FOR OPERATION Mulch Kit - AMENHM628 (Service Parts) A mid PTO kit is required to operate this
mower. The PTO kit can only be NOTE: ordered through parts (MT20022006). REQIREMENTS FOR OPERATION A mid PTO kit is required to operate this mower. The PTO kit can only be ordered through parts (MT20022005).
-CP1Z 03 027 000 10-AUG-1545 of 114
(Ex Works Wholegoods Depot)
MW SERIES MOWERS FOR FARMALL BUS PRICE LIST
-CP1Z 03
Models
COMMERCIAL MODEL Weight Factory Data List Price MW166S FARMALL B 443 LB 9002805P11 $3,643.00 MW172S FARMALL B 443 LB 9002889P04 $3,752.00
-CP1Z 03 027 000 10-AUG-1546 of 114
(Ex Works Wholegoods Depot)
RR SERIES REAR MOUNT FINISHING MOWERSUS PRICE LIST
-CP1A 01
Standard Equipment
RR60 - RIGID FRAME: RR144 - FLEX WING: Category I 3-point mounted Overall Cutting Width - 12 ft. (3.66m) Flex finishing mower Center Deck Cutting Width - 5 ft. (1.52m) Cutting Width: 60 inches (1524mm) Wing Deck Cutting Width - 4 ft. (1.22m) Discharge: Rear Deck Overlap - 6 in. (152 mm) Discharge Safety Chain Overall Width - 146 in. (3.71m) PTO HP Rating: Up to 30 Transport Width - 100 in. (2.54m) Drive Method: Rear 540 RPM PTO Maximum Overall Length - 182 in. Number of Blades: 3 (4.62m) Blade Drive: V-Belt Transport Length - 177 in. (4.5m) Blade speed (RPM): 2,630 Transport Height - 90 in. (2.29m) Cutting Height: 1 to 4 in. (25 to 101mm) Minimum HP - 30 (4) Solid Rubber Gauge Wheels Cutting Height Range - 1 to 5 in. (fully rotating) (25 to 127 mm)
Blade Tip Speed (FPM) - 16,000 RR72 - RIGID FRAME: Caster Wheels (12) - 15x6.00-6 Category I 3-point mounted Transport Tires (2) - 26x12.00-12 finishing Mower Cutting Width: 72 inches (1829mm) RR180 - FLEX WING: Discharge: Rear Overall Cutting Width - 15 ft. (4.57m) Flex Discharge Safety Chain Center Deck Cutting Width - 6 ft. (1.83m) PTO HP Rating: Up to 40 Wing Deck Cutting Width - 5 ft. (1.52m) Drive Method: Rear 540 RPM PTO Deck Overlap - 6 in. (152 mm) Number of Blades: 3 Overall Width - 182 in. (4.62m) Blade Drive: V-Belt Transport Width - 101 in. (2.57m) Blade speed (RPM): 2,230 Maximum Overall Length - 185 in. (4.7m) Cutting Height: 1 to 4 in. (25 to 101mm) Transport Length - 180 in. (4.57m) (4) Solid Rubber Gauge Wheels Transport Height - 100 in. (2.54m) (fully rotating) Minimum HP - 35
Cutting Height Range - 1 to 5 in. RR90 - RIGID FRAME: (25 to 127 mm) Category I 3-point mounted Blade Tip Speed (FPM) - 16,000 finishing mower Caster Wheels (12) - 15x6.00-6 Cutting Width: 90 inches (2286mm) Transport Tires (2) - 26x12.00-12 Discharge: Rear Discharge Safety Chain PTO HP Rating: Up to 60 Drive Method: Rear 540 RPM PTO Number of Blades: 5 Blade Drive: V-Belt Blade speed (RPM): 2,630 Cutting Height: 1 to 4 in. (25 to 101mm) (4) Solid Rubber Gauge Wheels (fully rotating)
-CP1A 01 027 000 10-AUG-1547 of 114
(Ex Works Wholegoods Depot)
RR SERIES REAR MOUNT FINISHING MOWERSUS PRICE LIST
-CP1A 01
Standard Equipment
RR204 - FLEX WING: RR204 - FLEX WING: (continued) Overall Cutting Width - 17 ft. (5.18m) Flex Transport Length - 188 in. (4.78m) Center Deck Cutting Width - 7.5 ft. Transport Height - 110 in. (2.79m) (2.29m) Minimum HP - 40 Wing Deck Cutting Width - 6 ft. (1.83m) Cutting Height Range - 1 to 5 in. Deck Overlap - 12 in. (305 mm) (25 to 127 mm) Overall Width - 207 in. (5.26m) Blade Tip Speed (FPM) - 16,000 Transport Width - 102 in. (2.59m) Caster Wheels (12) - 15x6.00-6 Maximum Overall Length - 196 in. Transport Tires (2) - 26x12.00-12 (4.98m)
-CP1A 01 027 000 10-AUG-1548 of 114
(Ex Works Wholegoods Depot)
RR SERIES REAR MOUNT FINISHING MOWERSUS PRICE LIST
-CP1A 01
Models
COMMERCIAL MODEL Weight Factory Data List Price RR60 60 INCH MOWER 2,000 LB 9002247P63 $2,919.00 RR72 72 INCH MOWER 2,000 LB 9002368P52 $3,076.00 RR90 90 INCH MOWER 2,000 LB 9003248P63 $4,219.00 RR144 12 FT MOWER 3,000 LB 9012225P29 $15,877.00 RR180 15 FT MOWER 3,520 LB 9013190P10 $17,130.00 RR204 17 FT MOWER 3,520 LB 9014359P73 $18,649.00
-CP1A 01 027 000 10-AUG-1549 of 114
50 of 114
(Ex Works Wholegoods Depot)
BR SERIES FRONT MOUNT ROTARY BROOMSUS PRICE LIST
-CP1C 01
Standard Equipment
Model BR160: (FOR FARMALL 31, 35, 40, 45 & 50) REQUIREMENTS FOR OPERATION: Quick attach design, mid-PTO driven TRACTOR MID MOUNT PTO IS Sweeping width: 55 inches (1397mm) REQUIRED. Sweeping width @ 25º: 49 inches (1245mm) If tractor is not equipped with Mid Broom diameter: 22 inches (560mm) Mount PTO, order appropriate kit from Brush type: Wafer tractor Parts Division Supplied Bristle material: Polypropylene Accessories chart. Manual angling: Standard Angling range: 0 to 25º (NOTE: On CVT version tractors, Drive system: PTO to Gearbox to Mid Mount PTO is only available as #50 HD chain a factory installed option.) Storage stand: Standard
FOR FARMALL 31-50 TRACTORS: Model BR172: TRACTOR MUST BE EQUIPPED WITH (FOR FARMALL 31, 35, 40, 45 , 50, MID MOUNT VALVE AND JOYSTICK in 40B CVT, 45B CVT, and 50B CVT) order to operate loaders, front mount Quick attach design, Mid-PTO driven brooms, front mount blades or Sweeping width: 67 inches (1702mm) front mount snow blowers. Sweeping width @ 25º: 60 inches (1525mm) If tractor was not ordered "Loader Broom diameter: 22 inches (560mm) Ready" please consult the Compact Bristle material: Polypropylene Tractor Parts Division Supplied Brush type: Wafer Accessories chart for valve and Manual angling: Standard joystick ordering information. Angling range: 0 to 25º Drive system: PTO to Gearbox to FOR FARMALL B TRACTORS: #50 HD chain Tractor comes equipped with Storage stand: Standard Mid-mount valve and Joystick as
standard equipment Model BR172: (FOR FARMALL 30B, 35B, 40B & 50B) Quick attach design, Mid-PTO driven Sweeping width: 67 inches (1702mm) Sweeping width @ 25º: 60 inches (1525mm) Broom diameter: 22 inches (560mm) Bristle material: Polypropylene Brush type: Wafer Manual angling: Standard Angling range: 0 to 25º Drive system: PTO to Gearbox to #50 HD chain Storage stand: Standard
-CP1C 01 027 000 10-AUG-1551 of 114
(Ex Works Wholegoods Depot)
BR SERIES FRONT MOUNT ROTARY BROOMSUS PRICE LIST
-CP1C 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price BR172 FARMALL B/C BR172 FOR FARMALL B 600 LB 9003993P99 $5,187.00 BR172 ROTARY BROOM BR172 FOR FARMALL 31-50
+CVT 500 LB 9003993P99 $5,187.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge 439115 Subframe 33/37/41/46
For Farmall 30C/35C/40C/ 50C 9001481P48 $1,924.00
717989 Front Quick Hitch 30/35/40/50 For Farmall 30B, 35B, 40B and 50B
9001481P48 $1,924.00
717751 Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
9001582P35 $2,055.00
439068 S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above
9001582P35 $2,055.00
DRIVE COMPLETION KITS
SD_03007 MID PTO DRIVE KIT X03007X No Mid PTO Drive Kit No Charge 717761 Mid PTO Drive Kit-III AT
For Farmall 40C CVT, 45C CVT 50C CVT, 55C CVT, 40B CVT, 45B CVT, and 50B CVT
9000638P33 $829.00
-CP1C 01 027 000 10-AUG-1552 of 114
(Ex Works Wholegoods Depot)
BR SERIES FRONT MOUNT ROTARY BROOMSUS PRICE LIST
-CP1C 01
439124 Mid PTO 32/36 HP T3 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline.
9000780P78 $1,014.00
439116 Mid PTO Tier 4 41/47 For Farmall 40C and 50C
9000780P78 $1,014.00
717990 Mid PTO 30/35/40/50 For Farmall 30B, 35B, 40B and 50B
9000780P78 $1,014.00
HYDRAULIC ANGLING KIT
SD_20087 HYDRAULIC FRAME ANGLING KIT X20087X No Hydraulic Angling Kit No Charge 715677 Hydraulic Angling Kit 26 LB 9000514P36 $668.00
SIDE CASTERWHEELS KIT
SD_29035 SIDE CASTER WHEEL KIT X29035X No Side Casterwheels Kit No Charge 717231 Side Casterwheels Kit
2 x 6 47 LB 9000437P36 $568.00
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 715294 French Canadian 1 LB No Charge
-CP1C 01 027 000 10-AUG-1553 of 114
(Ex Works Wholegoods Depot)
BR SERIES FRONT MOUNT ROTARY BROOMSUS PRICE LIST
-CP1C 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Quick Hitch and Subframe 439115006 MALE HITCH/SUBFRAME 33/37/41/46 HP T4
For Farmall 30C/35C/40C/50C 363 LB 9001481P48 $1,924.00
717989006 SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B
325 LB 9001481P48 $1,924.00
717751006 SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
510 LB 9001582P35 $2,055.00
439068006 Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above
For Farmall 40 CVT, 45 CVT, 50 CVT, 40B CVT, 45B CVT, and 50B CVT
30 LB 9000638P33 $829.00
439124006 MID PTO 32/36 HP T4 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline.
25 LB 9000780P78 $1,014.00
439116006 Mid PTO drive kit for 41/47 hp -T4 For Farmall 40C/ 50C
25 LB 9000780P78 $1,014.00
717990006 MID PTO 30/35/40/50 HP Mid PTO drive kit for Farmall 30B, 35B, 40B and 50B
25 LB 9000780P78 $1,014.00
Additional Attachments 717231016 2 X 6 side caster w/Wheel kit
For BR160 and BR172 47 LB 9000437P36 $568.00
715677016 HYD ANGLING 60&72"(2.0,3.0) For Farmall 30, 35, 40, 45, 50, 30B, 35B, 40B, 50B, 40B CVT, 45B CVT, and 50B CVT
10 LB 9000514P36 $668.00
-CP1C 01 027 000 10-AUG-1554 of 114
(Ex Works Wholegoods Depot)
TL SERIES ROTARY TILLERSUS PRICE LIST
-CP1K 01
Standard Equipment
TL160: TL172H: Recommended for use on Recommended for use on (Farmall 31, 35, 30B, and 35B) (Farmall 40, 45, 50, 55, 60, 40B, 50B, Approximate working width: 60 inches 40B CVT, 45B CVT, and 50B CVT) (1524mm) Approximate working width: 72 inches Tilling depth adjustment with guide (1830mm) shoes: 0 to 4.5 inches (0 to 114mm) Tilling depth adjustment with guide Maximum tilling depth without guide shoes: 0 to 5 inches (0 to 127mm) shoes: 7.25 inches (184mm) Maximum tillage depth without guide Hitch: Category I shoes: 7 inches (178mm) Offset Adjustment to Right: 11 inches Hitch: Category I or II (280mm) Offset Adjustment to Right: 11 inches PTO hp Rating: 45 (280mm) Rotor Drive Type: Chain PTO hp Rating: 60 Drive Protection: Slip Clutch Rotor Drive Type: Gear Rotor Speed @ 540 RPM PTO: 236 RPM Drive Protection: Slip Clutch Number of Blades: 28 Rotor Speed @ 540 RPM PTO: 211 RPM Blade Tip Speed @ 540 RPM: Number of Blades: 36 1063 (FPM) Blade Tip Speed @ 540 RPM:
944 (FPM)
-CP1K 01 027 000 10-AUG-1555 of 114
(Ex Works Wholegoods Depot)
TL SERIES ROTARY TILLERSUS PRICE LIST
-CP1K 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price TL160 60IN ROT TILL TLX160 60IN CHAIN D 1,000 LB 9002243P01 $2,913.00 TL172H 72IN ROT TILL TL172H 72IN HD GEAR 1,000 LB 9002871P33 $3,729.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 715294 French Canadian 1 LB No Charge
REQUIREMENTS FOR OPERATION: FOR FARMALL 31-50 TRACTORS: TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers.
If tractor was not ordered "Loader Ready" please consult the Compact Tractor Parts Division Supplied Accessories chart for valve and joystick ordering information.
FOR FARMALL B TRACTORS: Tractor comes equipped with Mid-mount valve and Joystick as standard equipment
EX WORKS: Wholegoods (Ex Works Wholegoods Depot) Standard Factory Attachments (Ex Works Wholegoods Depot)
-CP1L 01 027 000 10-AUG-1557 of 114
(Ex Works - See Standard Equipment)
BM SERIES FRONT MOUNTED BLADES -BM1US PRICE LIST
-CP1L 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price BM172H FR BLADE CL3 BM172H 72IN HD FRNT 300 LB 9002177P56 $2,828.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge 439115 Subframe 33/37/41/46
For Farmall 30C/35C/40C/50C 9001481P48 $1,924.00
717989 Front Quick Hitch 30/35/40/50 For Farmall 30B, 35B, 40B and 50B
9001481P48 $1,924.00
717751 Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
9001582P35 $2,055.00
439068 S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above
9001582P35 $2,055.00
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 715294 French Canadian 1 LB No Charge
-CP1L 01 027 000 10-AUG-1558 of 114
(Ex Works - See Standard Equipment)
BM SERIES FRONT MOUNTED BLADES -BM1US PRICE LIST
-CP1L 01
OTHER EQUIPMENT
SD_50091 RUBBER BLADE EDGE X50091X No Rubber Cutting Edge No Charge 715679 Rubber Cutting Edge 61 LB 9000204P82 $266.00
-CP1L 01 027 000 10-AUG-1559 of 114
(Ex Works - See Standard Equipment)
BM SERIES FRONT MOUNTED BLADES -BM1US PRICE LIST
-CP1L 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Quick Hitch and Subframe 439115006 MALE HITCH/SUBFRAME 33/37/41/46 HP T4
For Farmall 30C/35C/40C/50C 363 LB 9001481P48 $1,924.00
717989006 SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B
325 LB 9001481P48 $1,924.00
717751006 SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
510 LB 9001582P35 $2,055.00
439068006 Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above
BS163H HEAVY DUTY: BS172H HEAVY DUTY: For use with Farmall 31 and 35 ONLY For use with: Quick attach design, mid-PTO driven Farmall 40, 45, 50, 40B CVT, Overall width: 63 inches (1600mm) 45B CVT, and 50B CVT ONLY Cutting width: 63 inches (1600mm) Quick attach design, mid-PTO driven Cutting height: 22 inches (560mm) Overall width: 72 inches (1830mm) Number of blades: 4 Cutting width: 72 inches (1830mm) Fan diameter: 18 inches (457mm) Cutting height: 26 inches (660mm) Auger diameter: 14 inches (356mm) Number of blades: 4 Impeller drive: Gear box reduction Fan diameter: 24 inches (610mm) Auger Drive: Two-part chute with Auger diameter: 15 inches (381mm) manual chute rotation Impeller drive: Gear box reduction/ Shearbolt protection #60 HD chain Adjustable skid shoes Auger Drive: Two-part chute with Front mount and drive completion manual chute rotation package. Includes chute with Shearbolt protection mechanical rotation, female Adjustable skid shoes portion of quick hitch and Front mount and drive completion front half of driveline. package. Includes chute with
mechanical rotation, female BS163B HEAVY DUTY: portion of quick hitch and For use with Farmall 30B, 35B, front half of driveline. 40B and 50B Tractors ONLY Quick attach design, mid-PTO driven BS174H HEAVY DUTY: Overall width: 63 inches (1600mm) For use with Farmall 30B, 35B, Cutting width: 63 inches (1600mm) 40B and 50B Tractors ONLY Cutting height: 22 inches (560mm) Quick attach design, mid-PTO driven Number of blades: 4 Overall width: 72 inches (1830mm) Fan diameter: 18 inches (457mm) Cutting width: 72 inches (1830mm) Auger diameter: 14 inches (356mm) Cutting height: 26 inches (660mm) Impeller drive: Gear box reduction Number of blades: 4 Auger Drive: Two-part chute with Fan diameter: 24 inches (610mm) manual chute rotation Auger diameter: 15 inches (381mm) Shearbolt protection Impeller drive: Gear box reduction/ Adjustable skid shoes #60 HD chain Front mount and drive completion Auger Drive: Two-part chute with package. Includes chute with manual chute rotation mechanical rotation, female Shearbolt protection portion of quick hitch and Adjustable skid shoes front half of driveline. Front mount and drive completion
package. Includes chute with mechanical rotation, female portion of quick hitch and front half of driveline.
-CP1M 01 027 000 10-AUG-1561 of 114
(Ex Works Wholegoods Depot)
BS SERIES FRONT MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 01
Standard Equipment
REQUIREMENTS FOR OPERATION: If tractor was not ordered TRACTOR MID MOUNT PTO IS "Loader Ready" please consult the REQUIRED. If tractor is not equipped Compact Tractor Parts Division with Mid Mount PTO, order appropriate Supplied Accessories chart kit from tractor Parts Division Supplied for valve and joystick ordering Accessories chart. information.
(Note: On CVT version tractors, FOR FARMALL B TRACTORS: Mid Mount PTO is only available as a Tractor comes equipped with factory installed option.) Mid-mount valve and Joystick as
standard equipment FOR FARMALL 31-50 TRACTORS: TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers.
-CP1M 01 027 000 10-AUG-1562 of 114
(Ex Works Wholegoods Depot)
BS SERIES FRONT MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price BS163H FARMALL B BS163H 63IN 1,005 LB 9004209P59 $5,467.00 BS174H FARMALL B BS174H 74IN 1,005 LB 9005360P74 $6,962.00 BS174H FARMALL C T4/CVT BS174J HD FR 450 LB 9005360P74 $6,962.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SUBFRAME AND HITCH
SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge 717989 Front Quick Hitch 30/35/40/50
For Farmall 30B, 35B, 40B and 50B 9001481P48 $1,924.00
439115 Subframe 33/37/41/46 For Farmall 30C/35C/40C/50C
9001481P48 $1,924.00
717751 Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
9001582P35 $2,055.00
439068 S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above
9001582P35 $2,055.00
FRONT MOUNTED DRIVE COMPLETING PACKAGE
SD_03007 MID PTO DRIVE KIT X03007X No Mid PTO Drive Kit No Charge 717761 Mid PTO Drive Kit-III AT
For Farmall 40, 45, 50, 40B, 45B & 50B - CVT Only 9000638P33 $829.00
717990 Mid PTO 30/35/40/50 For Farmall 30B, 35B, 40B and 50B
9000780P78 $1,014.00
-CP1M 01 027 000 10-AUG-1563 of 114
(Ex Works Wholegoods Depot)
BS SERIES FRONT MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 01
439124 Mid PTO 32/36 HP T3 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline.
Front mount completion kit for Farmall 31 and 35 and for Farmall 30B, 35B, 40B and 50B
232 LB No Charge
715339 Finishing Package 72"/74" Front mount completion kit for: Farmall 40 and 45 (HST or CVT) Farmall 50 (CVT) and Farmall 30B, 35B, 40B and 50B Farmall 40B CVT, 45B CVT and 50B CVT
220 LB No Charge
3 PART CHUTE
SD_29036 3 PART CHUTE X29036X No 3 Part Chute No Charge 715345 3 Part Chute
For BH163H or BH172H. Not available with BH163H FARMALL B or BH174H FARMALL B.
49 LB 9000337P26 $438.00
DRIFT CUTTER KIT
SD_50028 DRIFT CUTTER KIT X50028X No Drift Cutter No Charge 716248 Drift Cutter 28 LB 9000115P50 $150.00
ELECTRIC CHUTE DEFLECTOR
SD_29038 ELEC CHUTE DEFLECT X29038X No Electric Chute Deflector No Charge 715344 Electric Chute Deflector 8 LB 9000770P77 $1,001.00
-CP1M 01 027 000 10-AUG-1564 of 114
(Ex Works Wholegoods Depot)
BS SERIES FRONT MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 01
HYDRAULIC CHUTE DEFLECTOR
SD_20101 HYDRAULIC CHUTE DEF X20101X No Hydraulic Chute Deflector No Charge 716864 Hydraulic Chute Deflector 16 LB 9000350P35 $455.00
HYDRAULIC CHUTE ROTATION
SD_20088 HYDRAULIC CHUTE ROT X20088X No Hydraulic Chute Rotation No Charge 717172 Hydraulic Chute Rotation 11 LB 9000782P32 $1,016.00
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 715294 French Canadian 1 LB No Charge
OTHER EQUIPMENT
SD_40002 BALLAST BOX X40002X No Ballasting Box No Charge 717746 Ballasting Box - 500 Lbs.
for 3-pt hitch 100 LB 9000190P19 $247.00
-CP1M 01 027 000 10-AUG-1565 of 114
(Ex Works Wholegoods Depot)
BS SERIES FRONT MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
Quick Hitch and Subframe 439115006 MALE HITCH/SUBFRAME 33/37/41/46 HP T4
For Farmall 30C/35C/40C/50C 363 LB 9001481P48 $1,924.00
717989006 SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B
325 LB 9001481P48 $1,924.00
717751006 SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
510 LB 9001582P35 $2,055.00
439068006 Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above
For Farmall 40, 45, 40B CVT, 45B CVT, and 50B CVT 30 LB 9000638P33 $829.00
439116006 Mid PTO drive kit for 41/47 hp -T4 For Farmall 40C/50C
25 LB 9000780P78 $1,014.00
717990006 MID PTO 30/35/40/50 HP For Farmall 30B, 35B, 40B and 50B
25 LB 9000780P78 $1,014.00
439124006 MID PTO 32/36 HP T4 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline.
25 LB 9000780P78 $1,014.00
Additional Attachments 716248006 Drift Cutter
For BS172H or BH174H 28 LB 9000115P50 $150.00
717746006 Ballast Box 500 Lb Max 0.5,0.7 100 LB 9000190P19 $247.00 715345006 3 Part Chute
For BH163H or BH172H. Not available with BH163H FARMALL B or BH174H FARMALL B.
45 LB 9000337P26 $438.00
716864026 Hyd chute deflector For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H
15 LB 9000350P35 $455.00
715344006 Electric chute deflector For BH163H, BH163B, BH172H or BH174H
15 LB 9000770P77 $1,001.00
717172016 HYDRAULIC CUTE ROTATION KIT For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H
10 LB 9000782P32 $1,016.00
715346006 ATTACHMENT, FRT MTG COMP. Front mount completion kit (63") for Farmall 31 and 35 and also for Farmall 30B, 35B, 40B and 50B
205 LB 9001287P44 $1,672.00
715339006 FRONT PACKAGE Front mount completion kit (72") for Farmall 40, 45, 50, 40B CVT, 45B CVT, and 50B CVT also (74") for Farmall 30B, 35B, 40B, 50B
128 LB 9001287P44 $1,672.00
-CP1M 01 027 000 10-AUG-1566 of 114
(Ex Works Wholegoods Depot)
BS SERIES REAR MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 02
Standard Equipment
BS164R: For use on Farmall 31 and 35 3-point mounted, two-stage, rear PTO driven Overall width: 64 inches (1625mm) Cutting width: 64 inches (1625mm) Cutting height: 26 inches (660mm) Number of blades: 4 Fan diameter: 24 inches (610mm) Auger diameter: 15 inches (381mm) Auger drive: #60 chain Manual or hydraulic chute rotation optional Shearbolt protection Adjustable skid shoes Hitch, Driveline, Chute Manual chute rotation kit
BS174R: For use on Farmall 31, 35, 40, 45, 50, 55, 60, 40B CVT, 45B CVT, and 50B CVT 3-point mounted, two-stage, rear PTO driven Overall width: 74 inches (1880mm) Cutting width: 74 inches (1880mm) Cutting height: 26 inches (660mm) Number of blades: 4 Fan diameter: 24 inches (610mm) Auger diameter: 15 inches (381mm) Auger drive: #60 chain Manual or hydraulic chute rotation optional Shearbolt protection Adjustable skid shoes Hitch, Driveline, Chute Manual chute rotation kit
-CP1M 02 027 000 10-AUG-1567 of 114
(Ex Works Wholegoods Depot)
BS SERIES REAR MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 02
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price BS164R SNOW BLOWER BS164R 64IN CAT 1 3 900 LB 9002673P44 $3,472.00Includes the following EquipmentManual Chute Rotation Kit (715343) $215.00
BS174R SNOW BLOWER BS174R 74IN CAT 1 3 900 LB 9003494P26 $4,538.00Includes the following EquipmentManual Chute Rotation Kit (715343) $215.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
Hoses not included, One tractor rear remote valve is required for operation. Please consult the appropriate Tractor Model Price List for valve ordering information.
80 LB 9000398P86 $518.00
ADDITIONAL OPERATOR'S MANUAL
SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 715294 French Canadian 1 LB No Charge
-CP1M 02 027 000 10-AUG-1568 of 114
(Ex Works Wholegoods Depot)
BS SERIES REAR MOUNT SNOW BLOWERSUS PRICE LIST
-CP1M 02
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 715343046 Manual Roation 64-74-84IN 9 LB 9000165P55 $215.00 715342036 Hydraulic Rotation 64IN 52 LB 9000398P86 $518.00
*SPECIFICATIONS: *SPECIFICATIONS: Digging Depth - 92 in. Digging Depth - 100 in. Reach from Swing Pivot - 120 in. Reach from Swing Pivot - 130 in. Transport Height - 77 in. Transport Height - 88 in. Bucket Rotation - 174° Bucket Rotation - 180° Stabilizer Spread: Stabilizer Spread: Transport - 49 in. Transport - 56 in. Operating - 100 in. Operating - 119 in. Loading Height 70 in. Loading Height 76.0 in. Swing Arc - 175° Swing Arc - 175° Bucket Digging Forces - 3151 lb. Bucket Digging Forces - 4480 lb. Dipper Stick Digging Forces - 2059 lb. Dipper Stick Digging Forces - 2533 lb. Shipping Weight - 722 lb. Shipping Weight - 854 lb. Operating Pressure - 2175 psi Operating Pressure - 2500 psi
*Specifications may vary with tractor *Specifications vary with tractor model, model, hydraulic system, tire size, etc. hydraulic system, tire size, etc.
IMPORTANT INFORMATION IMPORTANT INFORMATION The tractor must be equipped with a The tractor must be equipped with a front end loader or front mount blade front end loader or front mount blade when installing a 900 Series backhoe. when installing a 900 Series backhoe.
Note: Mid-mount mower is not Note: Mid-mount mower is not compatible with backhoe installed. compatible with backhoe installed.
The following items are required to The following items are required to make up a complete backhoe: make up a complete backhoe: - Basic Packaged Backhoe - Basic Packaged Backhoe - Subframe (one required) - Subframe (one required) - Hydraulic Kit (one required) - Hydraulic Kit (one required) - Bucket (one required) - Bucket (one required) - Optional Equipment - Optional Equipment
-CP2C 01 027 000 10-AUG-1571 of 114
(Ex Works Telford, TN)
BHA SERIES BACKHOESUS PRICE LIST
-CP2C 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price BHA90 BACKHOE BHA90A 1,065 LB 9006125P35 $7,955.00 BHA102 BACKHOE BHA102 1,065 LB 9006625P85 $8,605.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SUBFRAMES
SD_N5701 HITCH AND SUBFRAME 439055 Subframe Economy
For Compact Farmall 30A/35A No Charge
717751 Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT
No Charge
717972 Subframe CL2 For Farmall 30C/35C and Farmall 30B/35B If ordering for a 30B or 35B (439118) FR HANGER BRKT CLS 2 MUST BE ordered in addition
No Charge
717973 Subframe CL3 For Farmall 40C/50C and Farmall 40B/50B If ordering for a 40B or 50B (439119) FR HANGER BRKT CLS 3 MUST BE ordered in addition
No Charge
SD_N5702 FRONT BRACKETS XN5702X No Front Brackets No Charge 439118 Fr Hanger Brkt Cls 2
Front Hanger Kit for Farmall 30B/35B - Must be used with 717972 (Farmall 30C/35C subframe) to allow Tier 4 subframe to fit Tier 3 units.
9000038P50 $50.00
439119 Fr Hanger Brkt Cls 3 Front Hanger Kit for Farmall 40B/50B - Must be used with 717973 (Farmall 40C/50C subframe) to allow Tier 4 subframe to fit Tier 3 units.
9000038P50 $50.00
-CP2C 01 027 000 10-AUG-1572 of 114
(Ex Works Telford, TN)
BHA SERIES BACKHOESUS PRICE LIST
-CP2C 01
HYDRAULIC KITS
SD_20102 HYDRAULIC KIT 439056 Hyd Kit Economy
For Compact Farmall 30A/35A No Charge
439069 Hyd Kit Cls 3 CVT For Farmall CVT
No Charge
439112 Hyd Kit Cls 2 ROPS Farmall 30C/35C and Discontinued Farmall 30B/35B
No Charge
439113 Hyd Kit Cls 3 ROPS Farmall 40C/50C and Discontinued Farmall 40B/50B
No Charge
BUCKET
SD_N5403 12 IN STD BUCKET XN5403X No 12 In. Standard Bucket No Charge 716399 12 In./305mm Standard Bucket 9000327P25 $425.00
SD_N5405 16 IN STD BUCKET XN5405X No 16 In. Standard Bucket No Charge 716400 16 In. Standard Bucket 9000368P06 $478.00
SD_N5407 18 IN STD BUCKET XN5407X No 18 In. Standard Bucket No Charge 716434 18 In./457mm Standard Bucket 9000385P00 $500.00
SD_N5409 24 IN STD BUCKET XN5409X No 24 In. Standard Bucket No Charge 716401 24 In. Standard Bucket 9000408P10 $530.00
SD_50005 BIG FOOT DIRT PADS X50005X No Big Foot Dirt Pads No Charge 716525 Big Foot Dirt Pads 9000192P50 $250.00
SD_50092 RUBBER STREET PADS X50092X No Rubber Street Pads No Charge 716410 Rubber Street Pads 9000131P67 $171.00
-CP2C 01 027 000 10-AUG-1573 of 114
(Ex Works Telford, TN)
BHA SERIES BACKHOESUS PRICE LIST
-CP2C 01
SD_N6413 MECH THUMB XN6413X No Mechanical Thumb No Charge 717916 Mechanical Thumb
BHA90 only 9000388P08 $504.00
439122 Mechanical Thumb Class 3 BHA102 only
9000388P08 $504.00
-CP2C 01 027 000 10-AUG-1574 of 114
(Ex Works Telford, TN)
BHA SERIES BACKHOESUS PRICE LIST
-CP2C 01
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 439118006 Front Hanger Bracket Class 2
Front Hanger Kit for Farmall 30B/35B - Must be used with 717972 (Farmall 30C/35C subframe) to allow Tier 4 subframe to fit Tier 3 units.
40 LB 9000038P50 $50.00
439119006 Front Hanger Bracket Class 3 Front Hanger Kit for Farmall 40B/50B - Must be used with 717973 (Farmall 40C/50C subframe) to allow Tier 4 subframe to fit Tier 3 units.
40 LB 9000038P50 $50.00
716399056 12In 3 Teeth 1.02 Cu. Ft Heaped Std/1.16 86 LB 9000327P25 $425.00 716400046 16In 4 Teeth 1.38 Cu. Ft Heaped Std/1.59 97 LB 9000368P06 $478.00 716434046 18In 4 Teeth 1.57 Cu. Ft Heaped Std/1.79 107 LB 9000385P00 $500.00 716401016 24In 4 Teeth 2.13 Cu. Ft Heaped Std/2.42 126 LB 9000408P10 $530.00 716525046 Big Foot Dirt Pads 52 LB 9000192P50 $250.00 717916036 Mechanical Thumb Class 2 7.5 Ft
BHA90 only 90 LB 9000388P08 $504.00
439122006 Mechanical Thumb Class 3 8.5 Ft BHA102 only
90 LB 9000388P08 $504.00
716410036 Rubber Street Pads 4 LB 9000131P67 $171.00
RC480: RC605: Cutting Width: 48 in. Cutting Width: 60 in. Cutting Height: 1 in. (min.) Cutting Height: 2 1/2 in. (min.) Cutting Capacity: 2 in. (max.) Cutting Capacity: 2 1/2 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 10 gauge Deck Thickness: 7 gauge Safety Deflectors: Rear Rubber Belting Safety Deflectors: Rear Rubber Belting Driveline Size: Cat. 4 - 540 rpm Driveline Size: Cat. 4 - 540 rpm Slip Protection: Shear Pin Slip Protection: Splined Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 1 spindle
Single tail wheel RC600: Cutting Width: 60 in. RC725: Cutting Height: 2 in. (min.) Cutting Width: 83 in. Cutting Capacity: 2 in. (max.) Cutting Height: 2 in. (min.) Blade Carrier: Pan Cutting Capacity: 2 1/2 in. (max.) Deck Thickness: 7 gauge Blade Carrier: Pan Safety Deflectors: Rear Rubber Belting Deck Thickness: 7 gauge Driveline Size: Cat. 4 - 540 rpm Safety Deflectors: Rear Rubber Belting Slip Protection: Shear Pin Driveline Size: Cat. 4 - 540 rpm Tire and Wheel: Laminated Slip Protection: Slip Clutch 1 spindle Tire and Wheel: Laminated
1 spindle RC720: Single tail wheel Cutting Width: 72 in. Cutting Height: 2 in. (min.) RC840: Cutting Capacity: 2 in. (max.) Cutting Width: 83 in. Blade Carrier: Pan Cutting Height: 2 in. (min.) Deck Thickness: 7 gauge Cutting Capacity: 2 1/2 in. (max.) Safety Deflectors: Rear Rubber Belting Blade Carrier: Pan Driveline Size: Cat. 4 - 540 rpm Deck Thickness: 7 gauge Slip Protection: Shear Pin Safety Deflectors: Rear Rubber Belting Tire and Wheel: Laminated Driveline Size: Cat. 4 - 540 rpm 1 spindle Slip Protection: Slip Clutch
Tire and Wheel: Laminated 1 spindle Single tail wheel
-CP1T 01 027 000 10-AUG-1577 of 114
(Ex Works Beaumont, TX)
RC ROTARY CUTTERSUS PRICE LIST
-CP1T 01
Standard Equipment
ROTARY CUTTER - HEAVY DUTY ROTARY CUTTER - HEAVY DUTY (3-POINT): (3-POINT): (continued)
RC727: RC960: Cutting Width: 72 in. Cutting Width: 96 in. Cutting Height: 2 in. (min.) Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 7 gauge Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Safety Deflectors: Front and Rear Chains Chains Driveline Size: Cat. 5 - 540 rpm Driveline Size: Cat. 5 - 540 rpm Slip Protection: Splined Slip Clutch Slip Protection: Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 2 spindle Single tail wheel Dual tail wheel
RC845: ROTARY CUTTER - HEAVY DUTY Cutting Width: 84 in. (PULL-TYPE): Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) RC1200: Blade Carrier: Pan Cutting Width: 120 in. Deck Thickness: 7 gauge Cutting Height: 2 in. (min.) Safety Deflectors: Front and Rear Cutting Capacity: 3 in. (max.) Chains Blade Carrier: Pan Driveline Size: Cat. 5 - 540 rpm Deck Thickness: 7 gauge Slip Protection: Splined Slip Clutch Safety Deflectors: Front and Rear Tire and Wheel: Laminated Chains 1 spindle Main Driveline: Cat. 5 CV w/ Single tail wheel Slip Clutch - 540 rpm
Tire and Wheel: Laminated RC84HD: 2 spindle Cutting Width: 84 in. Cutting Height: 2 in. (min.) Cutting Capacity: 4 in. (max.) Blade Carrier: Pan Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Chains Driveline Size: Cat. 5 - 540 rpm Slip Protection: Slip Clutch Tire and Wheel: Laminated 1 spindle Dual tail wheel
-CP1T 01 027 000 10-AUG-1578 of 114
(Ex Works Beaumont, TX)
RC ROTARY CUTTERSUS PRICE LIST
-CP1T 01
Standard Equipment
ROTARY CUTTER - HEAVY DUTY REQUIREMENTS FOR OPERATION: (PULL-TYPE): (continued) Tractor Horsepower (Max.):
RC480 - up to 48 RC1800 - 540 rpm driveline: RC600 - up to 48 (Standard and RC720 - up to 48 Smooth Top/Double Deck) RC605 - up to 65 Cutting Width: 180 in. RC725 - up to 65 Cutting Height: 2 in. (min.) RC840 - up to 65 Cutting Capacity: 3 in. (max.) RC727 - up to 95 Blade Carrier: Pan RC845 - up to 95 Deck Thickness: 7 gauge RC84HD - up to 140 Safety Deflectors: Front and Rear RC960 - up to 140 Chains RC1200 - up to 150 Main Driveline: Cat. 5 CV w/ RC1800 - up to 210 Slip Clutch 540 rpm Outboard Drivelines to wings: Cat. 4 w/Slip Clutch Tire and Wheel: Laminated 3 spindle
RC1800 - 1000 rpm driveline: (Standard and Smooth Top/Double Deck) Cutting Width: 180 in. Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Deck Thickness: 7 gauge Safety Deflectors: Front and Rear Chains Main Driveline: Cat. 5 CV w/ Slip Clutch 1000 rpm - 1 3/8 in. shaft 1000 rpm - 1 3/4 in. shaft Outboard Drivelines to wings: Cat. 4 w/Slip Clutch Tire and Wheel: Aircraft (used) 3 spindle Hydraulic level lift
-CP1T 01 027 000 10-AUG-1579 of 114
(Ex Works Beaumont, TX)
RC ROTARY CUTTERSUS PRICE LIST
-CP1T 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price RC480 ROTARY CUTTR 48 in. standard-duty 5,894 LB 9001212P75 $1,575.00 RC600 ROTARY CUTTR 60 in. standard-duty 781 LB 9001403P71 $1,823.00 RC720 ROTARY CUTTR 72 in. standard-duty 885 LB 9001714P02 $2,226.00 RC605 ROTARY CUTTR 60 in. medium-duty 885 LB 9002020P48 $2,624.00 RC725 ROTARY CUTTR 72 in. medium-duty 903 LB 9002277P66 $2,958.00 RC840 ROTARY CUTTR 84 in. medium-duty 1,400 LB 9002625P70 $3,410.00 RC727 ROTARY CUTTR 72 in. HD single tail 1,193 LB 9002859P01 $3,713.00 RC845 ROTARY CUTTR 84 in. HD single tail 1,193 LB 9003914P68 $5,084.00 RC84HD ROTARY CUTTR 84 in. HD dual tail 1,680 LB 9005777P31 $7,503.00 RC960 ROTARY CUTTR 96 in. HD dual tail 1,749 LB 9006396P39 $8,307.00 RC1200 ROTARY CUTTR 540 rpm, 120 in. 1,749 LB 9008783P39 $11,407.00 RC1800 540RPM 540 rpm, 180 in. 1,749 LB 9015271P41 $19,833.00 RC1800 1000RPM 1-3/8 1000 rpm 180 in.1-3/8 in. shft 5,594 LB 9017494P40 $22,720.00 RC1800 1000RPM 1-3/4 1000 rpm 180 in.1-3/4 in. shft 1,749 LB 9017494P40 $22,720.00 RC1800 540RPM DD 540rpm, 180 in. Dbl Deck 5,594 LB 9017646P86 $22,918.00 RC1800 1000 1-3/8 DD 1000rpm,180in.1-3/8 Dbl Deck 5,594 LB 9019594P19 $25,447.00 RC1800 1000 1-3/4 DD 1000rpm,180in.1-3/4 Dbl Deck 1,749 LB 9019594P19 $25,447.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
OTHER EQUIPMENT
SD_16049 EXTRA WHEELS, TIRES AND RIMS X16049X No Extra Wheels and Tires No Charge 717984 Aircraft Tires (2)
Available on RC1800 with 1000RPM driveline 9000354P20 $460.00
717985 Aircraft Tires (6) Available on RC1800 with 540RPM driveline
9001062P60 $1,380.00
717986 Aircraft Tires (8) Available on RC1800 with 540RPM driveline
9001422P19 $1,847.00
717987 Foam Filled P Tire 6 Available on all RC1800 Models
9001422P19 $1,847.00
717988 Foam Filled P Tire 8 Available on all RC1800 Models
9001794P87 $2,331.00
-CP1T 01 027 000 10-AUG-1580 of 114
(Ex Works Beaumont, TX)
RC ROTARY CUTTERSUS PRICE LIST
-CP1T 01
SD_N6428 FRONT SAFETY CHAINS XN6428X No Front Safety Chains No Charge 717979 Front Safety Chains
Available on RC480, RC600 and RC720 9000149P38 $194.00
SD_N6429 REAR SAFETY CHAINS XN6429X No Rear Safety Chain No Charge 717980 Rear Safety Chains
Available on RC480, RC600 and RC720 9000149P38 $194.00
SD_N6430 SLIP CLUTCH XN6430X No Slip Clutch No Charge 717981 Slip Clutch
Available on RC480, RC600 and RC720 9000180P18 $234.00
SD_N6431 DUAL TAIL WHEEL XN6431X No Dual Tail Wheel No Charge 717982 Dual Tail Wheel
Available on RC605, RC725, RC727, RC840, RC845, and RC1800 9000429P66 $558.00
SD_N6432 HYD LIFT XN6432X No Hyd Lift No Charge 717983 Hyd Lift
Available on RC1800 with 540RPM driveline 9001040P27 $1,351.00
SD_N6433 COATING XN6433X No Coating No Charge 717991 Galvanized if MODEL is 72 in. standard-duty 9000086P24 $112.00 if MODEL is 60 in. medium-duty 9000086P24 $112.00 if MODEL is 48 in. standard-duty 9000086P24 $112.00 if MODEL is 72 in. medium-duty 9000086P24 $112.00 if MODEL is 60 in. standard-duty 9000086P24 $112.00 if MODEL is 84 in. medium-duty 9000086P24 $112.00 if MODEL is 540 rpm, 120 in. 9000214P06 $278.00 if MODEL is 96 in. HD dual tail 9000214P06 $278.00 if MODEL is 84 in. HD dual tail 9000214P06 $278.00 if MODEL is 84 in. HD single tail 9000214P06 $278.00 if MODEL is 72 in. HD single tail 9000214P06 $278.00 if MODEL is 540 rpm, 180 in. 9000643P72 $836.00 if MODEL is 540rpm, 180 in. Dbl Deck 9000643P72 $836.00 if MODEL is 1000 rpm 180 in.1-3/4 in. shft 9000643P72 $836.00 if MODEL is 1000 rpm 180 in.1-3/8 in. shft 9000643P72 $836.00 if MODEL is 1000rpm,180in.1-3/4 Dbl Deck 9000643P72 $836.00 if MODEL is 1000rpm,180in.1-3/8 Dbl Deck 9000643P72 $836.00
-CP1T 01 027 000 10-AUG-1581 of 114
(Ex Works Beaumont, TX)
RC ROTARY CUTTERSUS PRICE LIST
-CP1T 01
SD_N6436 QUICK ATTACH HITCH XN6436X No Quick Attach Hitch No Charge 439026 Quick Attach Hitch
717980016 60" Rear Safety Chains Available on RC600
44 LB 9000149P38 $194.00
717980026 72" Rear Safety Chains Available on RC720
48 LB 9000149P38 $194.00
-CP1T 01 027 000 10-AUG-1583 of 114
84 of 114
(Ex Works Beaumont, TX)
WORK EZ® DISK HARROWUS PRICE LIST
-CP1U 01
Standard Equipment
78 IN. DISK HARROW: REQUIREMENTS FOR OPERATION: Number of Disk Blades: 20 notched Tractor Horsepower (Min./Max.): 20 - 60 (front and rear) Hitch: Cat. I EZ Match™ compatible Disk Blade Size: 18 in. diameter Disk Blade Spacing: 5 1/2 in. F, 6 1/2 in., 7 1/2 in. R Maximum Cutting Depth: 6 in. Cutting Width: 70 in. Overall Length: 60 in. Overall Width: 79 in. Bearing Lubrication: sealed bearings Adjustable gang angle
-CP1U 01 027 000 10-AUG-1585 of 114
(Ex Works Beaumont, TX)
WORK EZ® DISK HARROWUS PRICE LIST
-CP1U 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ DISK HARROW EZ78DC 78in Disk Harrow 678 LB 9001834P91 $2,383.00
-CP1U 01 027 000 10-AUG-1586 of 114
(Ex Works Beaumont, TX)
WORK EZ® RAKESUS PRICE LIST
-CP1V 01
Standard Equipment
LANDSCAPE RAKE: REQUIREMENTS FOR OPERATION: Rake Width: Maximum Tractor Horsepower: 50 60LR - 60 in. Hitch: Cat. I EZ Match™ compatible 72LR - 72 in. 84LR - 84 in. Tine Spacing: 1 in. Tine Size: 5/16 x 1 in. Tine Material: high carbon spring steel Angle: 5 forward / 3 reverse Rake Pivot: 360° Pivot King Pin: 1 1/4 in.
-CP1V 01 027 000 10-AUG-1587 of 114
(Ex Works Beaumont, TX)
WORK EZ® RAKESUS PRICE LIST
-CP1V 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60LR RAKE EZ60L 60in Landsc Rake 245 LB 9000699P93 $909.00 WORK EZ 72LR RAKE EZ72LR 72in Landsc Rake 269 LB 9000798P49 $1,037.00 WORK EZ 84LR RAKE EZ84LR 84in Rock Rake 326 LB 9001091P09 $1,417.00
-CP1V 01 027 000 10-AUG-1588 of 114
(Ex Works Beaumont, TX)
WORK EZ® BOX BLADESUS PRICE LIST
-CP1W 01
Standard Equipment
BOX BLADES: INDUSTRIAL (For Contractors):
STANDARD DUTY (For Estate and Homeowners): OPTIONAL hydraulic raise/lower shank
bar (infinite adjustment) Number of Scarifiers (Shanks): 4 to 5 Number of Scarifiers (Shanks): 8 Overall Height: 35 1/2 in. Overall Height: 36 in. Box Depth: 17 in. Box Depth: 19 in. Cutting Edge: 1/2 x 6 in., Reversible Cutting Edge: 1/2 x 6 in., Reversible Number of Cutting Edges: 2 Number of Cutting Edges: 2 Shank Adjustment: manual Shank Adjustment: manual Side Plate (Endplate) Thickness: Side Plate (Endplate) Thickness: 3/16 in. 3/4 in. Hinges Rear Flat with Cutting Edge: Hinges Rear Flat with Cutting Edge: n/a Standard
MEDIUM DUTY (For Landscapers): REQUIREMENTS FOR OPERATION:
OPTIONAL hydraulic raise/lower shank Tractor Horsepower (Max.): bar (infinite adjustment) 48BL - up to 28 2wd / 20 4wd Number of Scarifiers (Shanks): 6 60BL - up to 28 2wd / 20 4wd Overall Height: 36 in. 60BM - up to 50 2wd / 40 4wd Box Depth: 17 in. 72BM - up to 50 2wd / 40 4wd Cutting Edge: 1/2 x 6 in., Reversible 84BM - up to 50 2wd / 40 4wd Number of Cutting Edges: 2 72BH - up to 75 2wd / 55 4wd Shank Adjustment: manual 84BH - up to 75 2wd / 55 4wd Side Plate (Endplate) Thickness: 96BI - up to 100 2wd / 80 4wd 3/8 in. Hinges Rear Flat with Cutting Edge: 3 Pt. Hitch: n/a 48BL - Cat. I EZ Match™ compatible
60BL - Cat. I EZ Match™ compatible HEAVY DUTY (For Contractors): 60BM - Cat. I
72BM - Cat. I OPTIONAL hydraulic raise/lower shank 84BM - Cat. I bar (infinite adjustment) 72BH - Cat. I Number of Scarifiers (Shanks): 6 84BH - Cat. I Overall Height: 36 in. 96BI - Cat. II Box Depth: 19 in. Cutting Edge: 1/2 x 6 in., Reversible Number of Cutting Edges: 2 Shank Adjustment: manual Side Plate (Endplate) Thickness: 1/2 in. Hinges Rear Flat with Cutting Edge: Standard
-CP1W 01 027 000 10-AUG-1589 of 114
(Ex Works Beaumont, TX)
WORK EZ® BOX BLADESUS PRICE LIST
-CP1W 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 48BL BLADE 48in 3pt Box Std Duty 313 LB 9000719P95 $935.00 WORK EZ 60BL BLADE 60in 3pt Box Std Duty 387 LB 9000804P65 $1,045.00 WORK EZ 60BM BLADE 60in 3pt Box Med Duty 484 LB 9000979P44 $1,272.00 WORK EZ 60BM BLADE 60in 3pt Box Med Duty - Hydr 701 LB 9001483P79 $1,927.00 WORK EZ 72BM BLADE 72in 3pt Box Med Duty 543 LB 9001049P51 $1,363.00 WORK EZ 72BM BLADE 72in 3pt Box Med Duty - Hydr 701 LB 9001555P40 $2,020.00 WORK EZ 84BM BLADE 84in 3pt Box Med Duty 603 LB 9001198P12 $1,556.00 WORK EZ 84BM BLADE 84in 3pt Box Med Duty - Hydr 701 LB 9001703P24 $2,212.00 WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty 704 LB 9001575P42 $2,046.00 WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty - Hydr 701 LB 9002244P55 $2,915.00 WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty 803 LB 9001788P71 $2,323.00 WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty - Hydr 803 LB 9002458P61 $3,193.00 WORK EZ 96BI BLADE 96in 3pt Box Ind Duty 1,153 LB 9002195P27 $2,851.00 WORK EZ 96BI BLADE 96in 3pt Box Ind Duty - Hydr 701 LB 9003087P70 $4,010.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
OTHER OPTIONS
SD_N6433 COATING XN6433X No Coating No Charge 717991 Galvanized 9000075P46 $98.00
-CP1W 01 027 000 10-AUG-1590 of 114
(Ex Works Beaumont, TX)
WORK EZ® REAR BLADESUS PRICE LIST
-CP1X 01
Standard Equipment
REAR BLADES: REQUIREMENTS FOR OPERATION:
STANDARD UTILITY (For Estate and Tractor Horsepower (max.): Homeowners): 60SL - 30 Moldboard Width: 60 in. / 72 in. 72SL - 30 Cutting Edge: 1/2 in. x 6 in. 60SM - 40 Offset Adjustment: 12 in. 72SM - 40 Tilt Adjustment: n/a 84SM - 40 Angle Adjustment: 5 Forward / 3 72SH - 65 Reverse positions 84SH - 65
96SI - 100 MEDIUM DUTY (For Landscapers, Farm, 108SI - 100 or Ranch): 96SHI - 225 Moldboard Width: 60 in. / 72 in. / 84 in. 120SHI - 225 Cutting Edge: 1/2 in. x 6 in. 144SHI - 225 Offset Adjustment: 12 in. Tilt Adjustment: 45° / E side 3 Pt. Hitch: Angle Adjustment: 5 Forward / 3 60SL - Cat. I EZ Match™ compatible Reverse positions 72SL - Cat. I EZ Match™ compatible
60SM - Cat. I EZ Match™ compatible HEAVY DUTY (For Contractors): 72SM - Cat. I EZ Match™ compatible Moldboard Width: 84 in. / 96 in. 84SM - Cat. I EZ Match™ compatible Cutting Edge: 1/2 in. x 6 in. 72SH - Cat. I/II Offset Adjustment: 12 in. 84SH - Cat. I/II Tilt Adjustment: 30° 96SI - Cat. II Angle Adjustment: 5 Forward / 3 108SI - Cat. II Reverse positions 96SHI - Cat. II/III
120SHI - Cat. II/III INDUSTRIAL (For Contractors): 144SHI - Cat. II/III Moldboard Width: 96 in. / 108 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 12 in. Tilt Adjustment: 15° Angle Adjustment: 30°
HEAVY INDUSTRIAL (For Contractors):
Moldboard Width: 96 in./120 in./144 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 24 in. Tilt Adjustment: 15° Angle Adjustment: 30°
-CP1X 01 027 000 10-AUG-1591 of 114
(Ex Works Beaumont, TX)
WORK EZ® REAR BLADESUS PRICE LIST
-CP1X 01
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60SM BLADE 60in 3pt Rear Med Duty 256 LB 9000729P19 $947.00 WORK EZ 72SM BLADE 72in 3pt Rear Med Duty 278 LB 9000833P14 $1,082.00 WORK EZ 84SM BLADE 84in 3pt Rear Med Duty 297 LB 9000933P24 $1,212.00 WORK EZ 84SH BLADE 84in 3pt Rear Hvy Duty 584 LB 9001050P28 $1,364.00 WORK EZ 96SH BLADE 96in 3pt Rear Hvy Duty 679 LB 9001145P76 $1,488.00 WORK EZ 96SI BLADE 96in 3pt Rear Ind Duty 1,074 LB 9003341P80 $4,340.00 WORK EZ 108SI BLADE 108in 3pt Rear Ind Duty 1,113 LB 9003814P58 $4,954.00 WORK EZ 96SHI BLADE 96in 3pt Rear Hvy Industrial 2,120 9007987P21 $10,373.00 WORK EZ 120SHI BLADE 108in 3pt Rear Hvy Industrial 2,260 LB 9008331P40 $10,820.00 WORK EZ 144SHI BLADE 144in 3pt Rear Hvy Industrial 2,400 LB 9008670P97 $11,261.00
-CP1X 01 027 000 10-AUG-1592 of 114
(Distribution Center)
WORK EZ® EZ MATCH™US PRICE LIST
-CP2A 01
Standard Equipment
The WORK EZ® EZ Match™ Quick Hitch The following Case-IH products are is designed to make changing from one quick hitch compatible: 3-point hitch attachment to another quick and EZ! The upper hook easily slips into EZ78DC - 78 in. Disk Harrow position and simply lock the lower hooks EZ60LR - 60 in. Landscape Rake with quick flip of two handles - many EZ72LR - 72 in. Landscape Rake times from the comfort and convenience EZ84LR - 84 in. Rock Rake of the tractor seat. EZ48BL - 48 in. Standard Duty Box Blade
EZ60BL - 60 in. Standard Duty Box Blade Designed for use on Category 1, 3-point EZ60SL - 60 in. Standard Utility hitch tractors and implements Rear Blade
EZ72SL - 72 in. Standard Utility Heavy-duty steel construction Rear Blade Lower arms lock automatically EZ60SM - 60 in. Medium Duty Fast, easy attachment and release Rear Blade Designed to ASAE S278.7 Quick Hitch EZ72SM - 72 in. Medium Duty standards Rear Blade
EZ84SM - 84 in. Medium Duty MODEL: WORK EZ® EZ Match™ Rear Blade Width (inches) - 28 center to center (Hooks are 1-1/2 " wide) Height (inches) - 24 Weight (pounds) - 80 Maximum Horsepower - 60
-CP2A 01 027 000 10-AUG-1593 of 114
(Distribution Center)
WORK EZ® EZ MATCH™US PRICE LIST
-CP2A 01
Models
COMMERCIAL MODEL Weight Factory Data List Price WORK EZ EZ MATCH 400 LB 9000253P33 $329.00
-CP2A 01 027 000 10-AUG-1594 of 114
WORK EZ® BALE CARRIERSUS PRICE LIST
-CP2B 01
Standard Equipment
WORK EZ® Bale Carriers and Spears MODEL: Work EZ® Bale Spear are designed to compliment compact Application - Standard duty and utility tractors equipped with 3-point Weight - 98 lbs hitch for handling round and square hay Weight rating - 2000 lbs bales. The WORK EZ® Bale Carriers Tractor Horsepower (max) - 60 and Spears are also Work EZ® - EZ Hitch - Cat. I Match™ compatible. Hot dipped galvanized frame
Replaceable high carbon steel spear MODEL: Work EZ® Bale Carrier Two welded bottom stabilizing spears Application - Standard duty Weight - 155 lbs Weight rating - 2000 lbs Tractor horsepower (max) - 60 Hitch - Cat. I Hot dipped galvanized frame NOTE: Fork tines go under bale
-CP2B 01 027 000 10-AUG-1595 of 114
WORK EZ® BALE CARRIERSUS PRICE LIST
-CP2B 01
Models
COMMERCIAL MODEL Weight Factory Data List Price WORK EZ BALE CARRIER 88 LB 9000338P03 $439.00 WORK EZ BALE SPEAR 155 LB 9000372P68 $484.00
-CP2B 01 027 000 10-AUG-1596 of 114
WORK EZ® HAY SPEARSUS PRICE LIST
-CP2B 02
Standard Equipment
WORK EZ® Hay Spears are designed to MODEL: Work EZ® Double Bale Quick compliment most tractors and skid Attach steers that are Universal Quick Hitch Application - Standard duty Compatible for handling round and Weight - 168 lbs square hay bales. Weight rating - 2000 lbs
Tractor Horsepower (max) - 80 MODEL: Work EZ® Single Bale Quick Hitch - Universal Q/A Attach Hot dipped galvanized frame Application - Standard duty Two replaceable high carbon steel Weight - 153 lbs spears Weight rating - 2000 lbs One welded top stabilizing spear Tractor Horsepower (max) - 80 Hitch - Universal Q/A Hot dipped galvanized frame Replaceable high carbon steel spear Two welded bottom stabilizing spears
-CP2B 02 027 000 10-AUG-1597 of 114
WORK EZ® HAY SPEARSUS PRICE LIST
-CP2B 02
Models
COMMERCIAL MODEL Weight Factory Data List Price WORKEZ SNGL BALE QA 168 LB 9000607P53 $789.00 WORKEZ DBL BALE QA 153 LB 9000699P16 $908.00
The items below are supplied by the Document Management Center (DMC). To order please contact the DMC at (262) 636-7540 or order online through the Dealer Portal (go to tools, select DMC link)