-
mincos
MMSMINING MASTER SMART
CONTROL UNIT• M1 Control unit • Remote control via TCP/IP •
High-performance PC technology with TFT dis-
play • Machine visualisation via ProVisIT • Ethernet fibre-optic
interface (TCP/IP, OPC)• Compact design • USB WiFi interface •
Connections for various fieldbus systems
-
mincos
FEATURES
The Mining Master Smart (MM Smart) is a state-of-the art
automation controller for the mining industry. It has been designed
specially for controlling plant and machinery underground. Typical
applications are the monitoring of belt conveyor systems, HP pumps,
ventilation doors, rails and cooling devices.
The device is in accordance with the protection mode “intrinsic
safety ia” and can be operated even in the presence of an explosive
atmosphere when connect-ed to an “ia” circuit.
The performance of the MM Smart is sufficient for controlling
plants ranging from small to medium-size. It has adequate capacity
for tasks such as the control of pump installations, conveyors,
cooling plant, and on-site construction materials plant.
Devices with the product reference IP6X are dust-tight in
accordance with DIN EN 60529.
They are designed to meet at least the require-ments for
protection against water jets from any direction.
DESIGN
The MM Smart has the advantage of full software compatibility
with the Mining Master controller and en-ables the use of existing
programs. Fast data transfer over long distances takes place on an
Ethernet net-work. Connections are made using fibre-optic cables,
which permit communication over distances up to 40 km.
The standard MULTIPROG® programming system is based on modern
32-bit Windows technology and in-corporates all the features of the
standard IEC 61131-3. With tools such as zoom, drag-and-drop, and
dock-able windows, it simplifies operation for the user. The
visualisation framework PLCPanel is supplied with every Mining
Master Smart. It is in interactive com-munication with the control
process and enables the display of application-specific
information, such as op-eration or fault messages, and the
configuration set-tings of the controller.
When troubleshooting, this helps the user to find the general
location of a problem faster so that it is easier to home in on a
defective operating point.
MORE PERFORMANCE
MMS can be provided with the optional Speed-CPU FB 213.5A. In
comparison with the stand-ard FB 213 module (16 bit), Speed-CPU has
a
32-bit architecture and a 1GB working memory. In this way,
Speed-CPU enables faster data processing and, as a result, shorter
reaction times.
The better performance permits the processing and output of
voice files via the field bus intercom (au-tomatic announcements
and voice notices) or in the VoIP adapter, more rapid data
processing on the net-work interface and a faster graphics function
(image formation) through the WLAN module. The current con-sumption
of FB 213.5A lies at 1.7A with all permitted interfaces equipped.
In the case of the MMS standard basic module FB 213, the second
network interface can continue to be used as a local service
interface. Only one network interface is available. The FB213.4A
MMS-Speed basic module permits the connection of an RJ45 adapter
via a USB interface for local servicing purposes. An MMS with a
Speed-CPU can be operated at ambient temperatures from –10°C to +
45°C.
MMS-Speed with FB 213.4A is suitable for sophisti-cated
applications with complex programs. (Control-lers, machine control
systems, and monitoring equip-ment with short reaction times).
The core of the controller is based on industrial PC technology
combined with a colour-graphics display.
-
Up to four modules for connecting sensors and actuators can be
inte-grated in the expansion housing.
USER-FRIENDLY CONFIGURATIONCONTROL ELEMENTS
The PC user interface offers all the advantages of a modern
human-machine interface. The robust touch-pad and individually
adaptable control elements allow for convenient operation of a
control system. A further feature of the controller is the local
emergency stop switch. If used as a control stand, the control
panel of the MM Smart is equipped with an emergency stop
switch.
• User-friendly
MULTIPROG® PROGRAMMING SYSTEM
The standard MULTIPROG® programming system sim-plifies operation
for the user through tools like zoom, drag and drop, and dockable
windows. Via the menu, libraries can be included, data types
realised and functions integrated quickly and easily, for
example.
• Functionality
PLCPANEL AND PROVISIT® VISUALISATION TOOLS
Mining Master Smart comes with the “PLCPanel” ba-sic
configuration framework. It is able to display us-er-specific
information such as status and fault mes-sages and control unit
configuration settings. ProVisIT is an easy to operate, compact
machine visualisation
system with impressive features.
• Information
Machine visualisation via ProVisIT provides clear dis-play of
system status and fault messages. ProVisIT also supports
parameterisation and configuration in case of changes to the
machine. ProVisIT supports Unicode. This allows the display of
Cyrillic and Chi-nese characters. The tool also offers full OPC
support.
This allows machine visualisation also via the network
interface of the control unit externally.
• Transparency
The MM Smart has a particularly user-friendly con-figuration, a
USB WiFi interface and allows for the expansion of I/O via modular
sub-assembly.
• Mobility
INTERFACES TO MACHINE OR SYSTEM PERIPHERY
With the MM Smart, up to two RS 485 fieldbus lines in BTS
standard and Modbus RTU or two Ast lines to PROMOS Ast standard can
be configured.
SAFETY CIRCUITS
The two fieldbus systems (Ast and BTS fieldbus) are provided
with a safety circuit in the system line.
DESIGN
The basic unit comprises a housing with a swing door. The door
contains the following integral components:
• 4 indicators with multi-coloured LEDs• a graphic display• a
touchpad as a mouse substitute
Otherwise, the equipment integrated in the door can vary. The
housing contains the controller basic mod-ule, which can be
equipped with the following inter-faces:
• 2 fieldbuses (Ast or BTS, or a combination of both) – without
safety circuit – with safety circuit
• 1 TP/FX converter• 1 USB/WLAN converter as add-on module
An expansion housing can be added to the basic housing.Up to 20
additional display or control elements can be
integrated in the door of the expan-sion housing.
-
Phone +49 6897 857-0
Fax +49 6897 857-188
Becker Mining Systems AG
Walter-Becker-Straße 1
66299 Friedrichsthal
Germany
[email protected]
MM
SM
ININ
G M
AS
TER
SM
AR
T C
ON
TRO
L U
NITmincos
1 2 3 4 5 6 7 8
F
E
D
C
B
A
F
E
D
C
B
A
+=
cba Becker MINING EUROPE GmbH
Barbarastraße 366299 Friedrichsthal
Bl.Rev. Modification Date Original
Date
Chkd.Subst. For Replaced by
Mechanical constructionSupervision Mining Master Smart
G074-501
1000006362
100 +Sheet
Projekt title
Drawing No.NormName
Drawn
101
TouchpadDisplay
-X4
95 115 95 105 95 115 95820
320
360
400
-X2-X1 -X3
-X31
19
-S29 -S30
-S31 -S32 -S33 -S34 -S35
-S36 -S39 -S40
-S21 -S22 -S23 -S24 -S25
-S26
-S1 -S2 -S3 -S4 -S5
T.Mang04.09.14
WHWH
RD
YEYEBUBU
Keyboard
Blank
FO
BlankBlank
BlankBlank
enclosure depth 230 mm
MINCOS BUS
AST field bus with intercoms and safety circuit
BTS field bus with intercoms and safety circuit
DATA BUS RS485
BTS field bus
Modus RTU
ADDITIONAL PROCESS INTERFACES
FSK-BTS data transmission up to 10 km
DUST20 mA inter-face
MECHANICAL PARAMETERSDegree of protection IP 65
Weight(without aux. enclosure )
ca. 12 kg to 16 kg
Weight(with aux. enclosure)
ca. 20 kg to 30 kg
Technical data are limit values. If the product is integrated
into systems or operated in combination with other devices, its
per-missible operating values can deviate from these limit values.
Subject to technical modifications without prior notice.
ORDER CODE REF
MMS.****** On request
The interfaces for fieldbuses and LAN are connected by means of
plug connectors. A WiFi antenna can be connected to a socket on the
housing, either directly or via a connecting cable. The controller
basic module and each fieldbus must be supplied by a separate power
supply unit in each case, each being connected to terminals via a
cable gland.
A complete supply solution for the control unit provided by a
compact power supply unit is available as an option. In this case,
the connection to the control unit is set up by means of a cable
pre-assembled with plug connectors. In the expansion housing, cable
glands are used to connect sensors or actuators to terminals that
are already hard-wired to the expansion modules.
revision - 1